libata: PATA-mode fixes for sis_sata
Changed PATA handler for PATA-ports used by sata_sis.
This patch was originally submitted by Jeff Garzik.
Added PCI-ID 1180 for SiS966 Controller in pata_sis.
The 1180 mode is fully compatible to other SiS PATA-controller.
The PCI-ID 1183 is SATA in PATA-emulation, but not fully compatible
to SiS5513/5518. sata_sis.c is forwarding this ID to pata_sis.
1183 is not working if simply added to pata_sis.
This handling fixes issues with SiS968.
Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 221099d..f111c98 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -72,8 +72,8 @@
{ PCI_VDEVICE(SI, 0x0181), sis_180 }, /* SiS 964/180 */
{ PCI_VDEVICE(SI, 0x0182), sis_180 }, /* SiS 965/965L */
{ PCI_VDEVICE(SI, 0x0183), sis_180 }, /* SiS 965/965L */
- { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/966L */
- { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L */
+ { PCI_VDEVICE(SI, 0x1182), sis_180 }, /* SiS 966/680 */
+ { PCI_VDEVICE(SI, 0x1183), sis_180 }, /* SiS 966/966L/968/680 */
{ } /* terminate list */
};
@@ -161,7 +161,6 @@
case 0x0182:
case 0x0183:
case 0x1182:
- case 0x1183:
addr += SIS182_SATA1_OFS;
break;
}
@@ -183,8 +182,8 @@
pci_read_config_dword(pdev, cfg_addr, &val);
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
- (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
+ (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
return (val|val2) & 0xfffffffb; /* avoid problems with powerdowned ports */
@@ -203,8 +202,8 @@
pci_write_config_dword(pdev, cfg_addr, val);
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
- (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
+ (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
pci_write_config_dword(pdev, cfg_addr+0x10, val);
}
@@ -224,8 +223,8 @@
val = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4));
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
- (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
+ (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
val2 = ioread32(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
return (val | val2) & 0xfffffffb;
@@ -245,8 +244,8 @@
sis_scr_cfg_write(ap, sc_reg, val);
else {
iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4));
- if ((pdev->device == 0x0182) || (pdev->device == 0x0183) || (pdev->device == 0x1182) ||
- (pdev->device == 0x1183) || (pmr & SIS_PMR_COMBINED))
+ if ((pdev->device == 0x0182) || (pdev->device == 0x0183) ||
+ (pdev->device == 0x1182) || (pmr & SIS_PMR_COMBINED))
iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4)+0x10);
}
}
@@ -293,11 +292,11 @@
/* The PATA-handling is provided by pata_sis */
switch (pmr & 0x30) {
case 0x10:
- ppi[1] = &sis_info133;
+ ppi[1] = &sis_info133_for_sata;
break;
case 0x30:
- ppi[0] = &sis_info133;
+ ppi[0] = &sis_info133_for_sata;
break;
}
if ((pmr & SIS_PMR_COMBINED) == 0) {
@@ -324,14 +323,14 @@
break;
case 0x1182:
+ dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/966/680 SATA controller\n");
+ pi.flags |= ATA_FLAG_SLAVE_POSS;
+ break;
+
case 0x1183:
- pci_read_config_dword(pdev, 0x64, &val);
- if (val & 0x10000000) {
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966L SATA controller\n");
- } else {
- dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1182/1183/966 SATA controller\n");
- pi.flags |= ATA_FLAG_SLAVE_POSS;
- }
+ dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 1183/966/966L/968/680 controller in PATA mode\n");
+ ppi[0] = &sis_info133_for_sata;
+ ppi[1] = &sis_info133_for_sata;
break;
}
