| |
| /* Radio tuning for RTL8225 on RTL8187SE |
| * |
| * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net> |
| * Copyright 2014 Andrea Merello <andrea.merello@gmail.com> |
| * |
| * Based on the r8180 and Realtek r8187se drivers, which are: |
| * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al. |
| * |
| * Also based on the rtl8187 driver, which is: |
| * Copyright 2007 Michael Wu <flamingice@sourmilk.net> |
| * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <net/mac80211.h> |
| |
| #include "rtl8180.h" |
| #include "rtl8225se.h" |
| |
| #define PFX "rtl8225 (se) " |
| |
| static const u32 RF_GAIN_TABLE[] = { |
| 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6, |
| 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057, |
| 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3, |
| 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3, |
| 0x0183, 0x0163, 0x0143, 0x0123, 0x0103 |
| }; |
| |
| static const u8 cck_ofdm_gain_settings[] = { |
| 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, |
| 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, |
| 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, |
| 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, |
| 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, |
| 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, |
| }; |
| |
| static const u8 rtl8225se_tx_gain_cck_ofdm[] = { |
| 0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e |
| }; |
| |
| static const u8 rtl8225se_tx_power_cck[] = { |
| 0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02, |
| 0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02, |
| 0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02, |
| 0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02, |
| 0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03, |
| 0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03 |
| }; |
| |
| static const u8 rtl8225se_tx_power_cck_ch14[] = { |
| 0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00, |
| 0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00, |
| 0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00, |
| 0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00, |
| 0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00, |
| 0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00 |
| }; |
| |
| static const u8 rtl8225se_tx_power_ofdm[] = { |
| 0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4 |
| }; |
| |
| static const u32 rtl8225se_chan[] = { |
| 0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380, |
| 0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A, |
| }; |
| |
| static const u8 rtl8225sez2_tx_power_cck_ch14[] = { |
| 0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00 |
| }; |
| |
| static const u8 rtl8225sez2_tx_power_cck_B[] = { |
| 0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x04 |
| }; |
| |
| static const u8 rtl8225sez2_tx_power_cck_A[] = { |
| 0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04 |
| }; |
| |
| static const u8 rtl8225sez2_tx_power_cck[] = { |
| 0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04 |
| }; |
| |
| static const u8 ZEBRA_AGC[] = { |
| 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, |
| 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72, |
| 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, |
| 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, |
| 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, |
| 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07, |
| 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, |
| 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, |
| 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, |
| 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e, |
| 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, |
| 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24, |
| 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, |
| 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F |
| }; |
| |
| static const u8 OFDM_CONFIG[] = { |
| 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50, |
| 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00, |
| 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26, |
| 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB, |
| 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00, |
| 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00, |
| 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e, |
| 0xD8, 0x3C, 0x7B, 0x10, 0x10 |
| }; |
| |
| static void rtl8187se_three_wire_io(struct ieee80211_hw *dev, u8 *data, |
| u8 len, bool write) |
| { |
| struct rtl8180_priv *priv = dev->priv; |
| int i; |
| u8 tmp; |
| |
| do { |
| for (i = 0; i < 5; i++) { |
| tmp = rtl818x_ioread8(priv, SW_3W_CMD1); |
| if (!(tmp & 0x3)) |
| break; |
| udelay(10); |
| } |
| if (i == 5) |
| wiphy_err(dev->wiphy, PFX |
| "CmdReg: 0x%x RE/WE bits aren't clear\n", tmp); |
| |
| tmp = rtl818x_ioread8(priv, &priv->map->rf_sw_config) | 0x02; |
| rtl818x_iowrite8(priv, &priv->map->rf_sw_config, tmp); |
| |
| tmp = rtl818x_ioread8(priv, REG_ADDR1(0x84)) & 0xF7; |
| rtl818x_iowrite8(priv, REG_ADDR1(0x84), tmp); |
| if (write) { |
| if (len == 16) { |
| rtl818x_iowrite16(priv, SW_3W_DB0, |
| *(u16 *)data); |
| } else if (len == 64) { |
| rtl818x_iowrite32(priv, SW_3W_DB0_4, |
| *((u32 *)data)); |
| rtl818x_iowrite32(priv, SW_3W_DB1_4, |
| *((u32 *)(data + 4))); |
| } else |
| wiphy_err(dev->wiphy, PFX |
| "Unimplemented length\n"); |
| } else { |
| rtl818x_iowrite16(priv, SW_3W_DB0, *(u16 *)data); |
| } |
| if (write) |
| tmp = 2; |
| else |
| tmp = 1; |
| rtl818x_iowrite8(priv, SW_3W_CMD1, tmp); |
| for (i = 0; i < 5; i++) { |
| tmp = rtl818x_ioread8(priv, SW_3W_CMD1); |
| if (!(tmp & 0x3)) |
| break; |
| udelay(10); |
| } |
| rtl818x_iowrite8(priv, SW_3W_CMD1, 0); |
| if (!write) { |
| *((u16 *)data) = rtl818x_ioread16(priv, SI_DATA_REG); |
| *((u16 *)data) &= 0x0FFF; |
| } |
| } while (0); |
| } |
| |
| static u32 rtl8187se_rf_readreg(struct ieee80211_hw *dev, u8 addr) |
| { |
| u32 dataread = addr & 0x0F; |
| rtl8187se_three_wire_io(dev, (u8 *)&dataread, 16, 0); |
| return dataread; |
| } |
| |
| static void rtl8187se_rf_writereg(struct ieee80211_hw *dev, u8 addr, u32 data) |
| { |
| u32 outdata = (data << 4) | (u32)(addr & 0x0F); |
| rtl8187se_three_wire_io(dev, (u8 *)&outdata, 16, 1); |
| } |
| |
| |
| static void rtl8225se_write_zebra_agc(struct ieee80211_hw *dev) |
| { |
| int i; |
| |
| for (i = 0; i < 128; i++) { |
| rtl8225se_write_phy_ofdm(dev, 0xF, ZEBRA_AGC[i]); |
| rtl8225se_write_phy_ofdm(dev, 0xE, i+0x80); |
| rtl8225se_write_phy_ofdm(dev, 0xE, 0); |
| } |
| } |
| |
| static void rtl8187se_write_ofdm_config(struct ieee80211_hw *dev) |
| { |
| /* write OFDM_CONFIG table */ |
| int i; |
| |
| for (i = 0; i < 60; i++) |
| rtl8225se_write_phy_ofdm(dev, i, OFDM_CONFIG[i]); |
| |
| } |
| |
| static void rtl8225sez2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) |
| { |
| struct rtl8180_priv *priv = dev->priv; |
| u8 cck_power, ofdm_power; |
| |
| cck_power = priv->channels[channel - 1].hw_value & 0xFF; |
| if (cck_power > 35) |
| cck_power = 35; |
| rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, |
| cck_ofdm_gain_settings[cck_power]); |
| |
| usleep_range(1000, 5000); |
| ofdm_power = priv->channels[channel - 1].hw_value >> 8; |
| if (ofdm_power > 35) |
| ofdm_power = 35; |
| |
| rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, |
| cck_ofdm_gain_settings[ofdm_power]); |
| if (ofdm_power < 12) { |
| rtl8225se_write_phy_ofdm(dev, 7, 0x5C); |
| rtl8225se_write_phy_ofdm(dev, 9, 0x5C); |
| } |
| if (ofdm_power < 18) { |
| rtl8225se_write_phy_ofdm(dev, 7, 0x54); |
| rtl8225se_write_phy_ofdm(dev, 9, 0x54); |
| } else { |
| rtl8225se_write_phy_ofdm(dev, 7, 0x50); |
| rtl8225se_write_phy_ofdm(dev, 9, 0x50); |
| } |
| |
| usleep_range(1000, 5000); |
| } |
| |
| static void rtl8187se_write_rf_gain(struct ieee80211_hw *dev) |
| { |
| int i; |
| |
| for (i = 0; i <= 36; i++) { |
| rtl8187se_rf_writereg(dev, 0x01, i); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x02, RF_GAIN_TABLE[i]); mdelay(1); |
| } |
| } |
| |
| static void rtl8187se_write_initial_gain(struct ieee80211_hw *dev, |
| int init_gain) |
| { |
| switch (init_gain) { |
| default: |
| rtl8225se_write_phy_ofdm(dev, 0x17, 0x26); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1); |
| break; |
| case 2: |
| rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1); |
| break; |
| case 3: |
| rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); |
| break; |
| case 4: |
| rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); |
| break; |
| case 5: |
| rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); |
| break; |
| case 6: |
| rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); |
| break; |
| case 7: |
| rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x24, 0xA6); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); |
| break; |
| case 8: |
| rtl8225se_write_phy_ofdm(dev, 0x17, 0x66); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x24, 0xB6); mdelay(1); |
| rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); |
| break; |
| } |
| } |
| |
| void rtl8225se_rf_init(struct ieee80211_hw *dev) |
| { |
| struct rtl8180_priv *priv = dev->priv; |
| u32 rf23, rf24; |
| u8 d_cut = 0; |
| u8 tmp; |
| |
| /* Page 1 */ |
| rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1); |
| rf23 = rtl8187se_rf_readreg(dev, 0x08); mdelay(1); |
| rf24 = rtl8187se_rf_readreg(dev, 0x09); mdelay(1); |
| if (rf23 == 0x0818 && rf24 == 0x070C) |
| d_cut = 1; |
| |
| wiphy_info(dev->wiphy, "RTL8225-SE version %s\n", |
| d_cut ? "D" : "not-D"); |
| |
| /* Page 0: reg 0 - 15 */ |
| rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x01, 0x06E0); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x03, 0x07F1); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x04, 0x0975); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x05, 0x0C72); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x06, 0x0AE6); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x07, 0x00CA); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x08, 0x0E1C); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x09, 0x02F0); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0A, 0x09D0); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0B, 0x01BA); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0C, 0x0640); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0E, 0x0020); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0F, 0x0990); mdelay(1); |
| /* page 1: reg 16-30 */ |
| rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x03, 0x0806); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x04, 0x03A7); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x05, 0x059B); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x06, 0x0081); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x07, 0x01A0); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0B, 0x0418); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0C, 0x0FBE); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(1); |
| if (d_cut) |
| rtl8187se_rf_writereg(dev, 0x0E, 0x0807); |
| else |
| rtl8187se_rf_writereg(dev, 0x0E, 0x0806); |
| mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x00, 0x01D7); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x03, 0x0E00); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x04, 0x0E50); mdelay(1); |
| |
| rtl8187se_write_rf_gain(dev); |
| |
| rtl8187se_rf_writereg(dev, 0x05, 0x0203); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x06, 0x0200); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11); |
| rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(11); |
| rtl8187se_rf_writereg(dev, 0x00, 0x0037); mdelay(11); |
| rtl8187se_rf_writereg(dev, 0x04, 0x0160); mdelay(11); |
| rtl8187se_rf_writereg(dev, 0x07, 0x0080); mdelay(11); |
| rtl8187se_rf_writereg(dev, 0x02, 0x088D); msleep(221); |
| rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11); |
| rtl8187se_rf_writereg(dev, 0x07, 0x0000); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x07, 0x0180); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x07, 0x0220); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x07, 0x03E0); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x06, 0x00C1); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1); |
| if (priv->xtal_cal) { |
| tmp = (priv->xtal_in << 4) | (priv->xtal_out << 1) | |
| (1 << 11) | (1 << 9); |
| rtl8187se_rf_writereg(dev, 0x0F, tmp); |
| wiphy_info(dev->wiphy, "Xtal cal\n"); |
| mdelay(1); |
| } else { |
| wiphy_info(dev->wiphy, "NO Xtal cal\n"); |
| rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); |
| mdelay(1); |
| } |
| /* page 0 */ |
| rtl8187se_rf_writereg(dev, 0x00, 0x00BF); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x04, 0x0975); msleep(31); |
| rtl8187se_rf_writereg(dev, 0x00, 0x0197); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x05, 0x05AB); mdelay(1); |
| |
| rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x01, 0x0000); mdelay(1); |
| rtl8187se_rf_writereg(dev, 0x02, 0x0000); mdelay(1); |
| /* power save parameters */ |
| /* TODO: move to dev.c */ |
| rtl818x_iowrite8(priv, REG_ADDR1(0x024E), |
| rtl818x_ioread8(priv, REG_ADDR1(0x24E)) & 0x9F); |
| rtl8225se_write_phy_cck(dev, 0x00, 0xC8); |
| rtl8225se_write_phy_cck(dev, 0x06, 0x1C); |
| rtl8225se_write_phy_cck(dev, 0x10, 0x78); |
| rtl8225se_write_phy_cck(dev, 0x2E, 0xD0); |
| rtl8225se_write_phy_cck(dev, 0x2F, 0x06); |
| rtl8225se_write_phy_cck(dev, 0x01, 0x46); |
| |
| /* power control */ |
| rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 0x10); |
| rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 0x1B); |
| |
| rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); |
| rtl8225se_write_phy_ofdm(dev, 0x00, 0x12); |
| |
| rtl8225se_write_zebra_agc(dev); |
| |
| rtl8225se_write_phy_ofdm(dev, 0x10, 0x00); |
| |
| rtl8187se_write_ofdm_config(dev); |
| |
| /* turn on RF */ |
| rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500); |
| rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500); |
| /* turn on RF again */ |
| rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500); |
| rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500); |
| /* turn on BB */ |
| rtl8225se_write_phy_ofdm(dev, 0x10, 0x40); |
| rtl8225se_write_phy_ofdm(dev, 0x12, 0x40); |
| |
| rtl8187se_write_initial_gain(dev, 4); |
| } |
| |
| void rtl8225se_rf_stop(struct ieee80211_hw *dev) |
| { |
| /* checked for 8187se */ |
| struct rtl8180_priv *priv = dev->priv; |
| |
| /* turn off BB RXIQ matrix to cut off rx signal */ |
| rtl8225se_write_phy_ofdm(dev, 0x10, 0x00); |
| rtl8225se_write_phy_ofdm(dev, 0x12, 0x00); |
| /* turn off RF */ |
| rtl8187se_rf_writereg(dev, 0x04, 0x0000); |
| rtl8187se_rf_writereg(dev, 0x00, 0x0000); |
| |
| usleep_range(1000, 5000); |
| /* turn off A/D and D/A */ |
| rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_OFF); |
| rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_OFF); |
| } |
| |
| void rtl8225se_rf_set_channel(struct ieee80211_hw *dev, |
| struct ieee80211_conf *conf) |
| { |
| int chan = |
| ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); |
| |
| rtl8225sez2_rf_set_tx_power(dev, chan); |
| rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]); |
| if ((rtl8187se_rf_readreg(dev, 0x7) & 0x0F80) != |
| rtl8225se_chan[chan - 1]) |
| rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]); |
| usleep_range(10000, 20000); |
| } |
| |
| static const struct rtl818x_rf_ops rtl8225se_ops = { |
| .name = "rtl8225-se", |
| .init = rtl8225se_rf_init, |
| .stop = rtl8225se_rf_stop, |
| .set_chan = rtl8225se_rf_set_channel, |
| }; |
| |
| const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *dev) |
| { |
| return &rtl8225se_ops; |
| } |
