)]}'
{
  "commit": "975b7f0fe669c313f925d60d67bce21f109b0f13",
  "tree": "a0eba19ff229be90595293673aecba806df1975c",
  "parents": [
    "1daa85d13f39144e43508fdd364ecbbaffbf35dc"
  ],
  "author": {
    "name": "Joel Stanley",
    "email": "joel@jms.id.au",
    "time": "Tue Mar 13 16:47:26 2018 +1030"
  },
  "committer": {
    "name": "Wim Van Sebroeck",
    "email": "wim@linux-watchdog.org",
    "time": "Sat Mar 24 10:19:39 2018 +0100"
  },
  "message": "watchdog: Add Nuvoton NPCM watchdog driver\n\nThe Nuvoton NPCM750 has a watchdog implemented as a single register\ninside the timer peripheral.\n\nThis driver exposes that watchdog as a standard watchdog device with\ncoarse timeout intervals, limited by the combination of prescaler and\ncounter that is provided by the hardware. The calculation is taken from\nthe Nuvoton vendor tree.\n\nThe watchdog is left running if a bootloader had it going. The rate is\nthe one specified in the device tree, or the default value (obtained\nfrom the datasheet).\n\nThere is a pre-timeout IRQ that is wired up. This timeout always occurs\n1024 clocks before the timeout.\n\nSigned-off-by: Joel Stanley \u003cjoel@jms.id.au\u003e\nReviewed-by: Guenter Roeck \u003clinux@roeck-us.net\u003e\nSigned-off-by: Guenter Roeck \u003clinux@roeck-us.net\u003e\nSigned-off-by: Wim Van Sebroeck \u003cwim@iguana.be\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "e873522fca2dcc8fbd8a3632fa070b3365823c84",
      "old_mode": 33188,
      "old_path": "drivers/watchdog/Kconfig",
      "new_id": "db96b92dbe69d02f3970ef3c3623cc647bcf0315",
      "new_mode": 33188,
      "new_path": "drivers/watchdog/Kconfig"
    },
    {
      "type": "modify",
      "old_id": "0474d38aa854fb2dd4f2db14bcfa167a13b4a5ab",
      "old_mode": 33188,
      "old_path": "drivers/watchdog/Makefile",
      "new_id": "97a5afb5cad242c5b5100becc6503aae57fc7e50",
      "new_mode": 33188,
      "new_path": "drivers/watchdog/Makefile"
    },
    {
      "type": "add",
      "old_id": "0000000000000000000000000000000000000000",
      "old_mode": 0,
      "old_path": "/dev/null",
      "new_id": "0d4213652ecc917029d65c1c2f8d519374ef0470",
      "new_mode": 33188,
      "new_path": "drivers/watchdog/npcm_wdt.c"
    }
  ]
}