Merge branch 'imx/dt-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
From Shawn Guo <shawn.guo@linaro.org>:
Here is the second (last) batch of imx device tree changes for 3.6.
* 'imx/dt-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx6q: ensure ANATOP controller is available
ARM: dts: imx6q-sabrelite: add ecspi1 pinctrl support
ARM: dts: imx6q-sabrelite: add usb devices
ARM: imx6q: disable usb charger detector
ARM: imx6q: add usbphy clocks
ARM: imx6q: add usb controller clock lookups
ARM: dts: imx: update #interrupt-cells for gpio nodes
bindings: update imx and mxs #gpio-cells
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd
index 679ce35..beef30c 100644
--- a/Documentation/ABI/testing/sysfs-block-rssd
+++ b/Documentation/ABI/testing/sysfs-block-rssd
@@ -1,26 +1,5 @@
-What: /sys/block/rssd*/registers
-Date: March 2012
-KernelVersion: 3.3
-Contact: Asai Thambi S P <asamymuthupa@micron.com>
-Description: This is a read-only file. Dumps below driver information and
- hardware registers.
- - S ACTive
- - Command Issue
- - Completed
- - PORT IRQ STAT
- - HOST IRQ STAT
- - Allocated
- - Commands in Q
-
What: /sys/block/rssd*/status
Date: April 2012
KernelVersion: 3.4
Contact: Asai Thambi S P <asamymuthupa@micron.com>
Description: This is a read-only file. Indicates the status of the device.
-
-What: /sys/block/rssd*/flags
-Date: May 2012
-KernelVersion: 3.5
-Contact: Asai Thambi S P <asamymuthupa@micron.com>
-Description: This is a read-only file. Dumps the flags in port and driver
- data structure
diff --git a/Documentation/device-mapper/verity.txt b/Documentation/device-mapper/verity.txt
index 32e4879..9884681 100644
--- a/Documentation/device-mapper/verity.txt
+++ b/Documentation/device-mapper/verity.txt
@@ -7,39 +7,39 @@
Construction Parameters
=======================
- <version> <dev> <hash_dev> <hash_start>
+ <version> <dev> <hash_dev>
<data_block_size> <hash_block_size>
<num_data_blocks> <hash_start_block>
<algorithm> <digest> <salt>
<version>
- This is the version number of the on-disk format.
+ This is the type of the on-disk hash format.
0 is the original format used in the Chromium OS.
- The salt is appended when hashing, digests are stored continuously and
- the rest of the block is padded with zeros.
+ The salt is appended when hashing, digests are stored continuously and
+ the rest of the block is padded with zeros.
1 is the current format that should be used for new devices.
- The salt is prepended when hashing and each digest is
- padded with zeros to the power of two.
+ The salt is prepended when hashing and each digest is
+ padded with zeros to the power of two.
<dev>
- This is the device containing the data the integrity of which needs to be
+ This is the device containing data, the integrity of which needs to be
checked. It may be specified as a path, like /dev/sdaX, or a device number,
<major>:<minor>.
<hash_dev>
- This is the device that that supplies the hash tree data. It may be
+ This is the device that supplies the hash tree data. It may be
specified similarly to the device path and may be the same device. If the
- same device is used, the hash_start should be outside of the dm-verity
- configured device size.
+ same device is used, the hash_start should be outside the configured
+ dm-verity device.
<data_block_size>
- The block size on a data device. Each block corresponds to one digest on
- the hash device.
+ The block size on a data device in bytes.
+ Each block corresponds to one digest on the hash device.
<hash_block_size>
- The size of a hash block.
+ The size of a hash block in bytes.
<num_data_blocks>
The number of data blocks on the data device. Additional blocks are
@@ -65,7 +65,7 @@
Theory of operation
===================
-dm-verity is meant to be setup as part of a verified boot path. This
+dm-verity is meant to be set up as part of a verified boot path. This
may be anything ranging from a boot using tboot or trustedgrub to just
booting from a known-good device (like a USB drive or CD).
@@ -73,20 +73,20 @@
has been authenticated in some way (cryptographic signatures, etc).
After instantiation, all hashes will be verified on-demand during
disk access. If they cannot be verified up to the root node of the
-tree, the root hash, then the I/O will fail. This should identify
+tree, the root hash, then the I/O will fail. This should detect
tampering with any data on the device and the hash data.
Cryptographic hashes are used to assert the integrity of the device on a
-per-block basis. This allows for a lightweight hash computation on first read
-into the page cache. Block hashes are stored linearly-aligned to the nearest
-block the size of a page.
+per-block basis. This allows for a lightweight hash computation on first read
+into the page cache. Block hashes are stored linearly, aligned to the nearest
+block size.
Hash Tree
---------
Each node in the tree is a cryptographic hash. If it is a leaf node, the hash
-is of some block data on disk. If it is an intermediary node, then the hash is
-of a number of child nodes.
+of some data block on disk is calculated. If it is an intermediary node,
+the hash of a number of child nodes is calculated.
Each entry in the tree is a collection of neighboring nodes that fit in one
block. The number is determined based on block_size and the size of the
@@ -110,63 +110,23 @@
On-disk format
==============
-Below is the recommended on-disk format. The verity kernel code does not
-read the on-disk header. It only reads the hash blocks which directly
-follow the header. It is expected that a user-space tool will verify the
-integrity of the verity_header and then call dmsetup with the correct
-parameters. Alternatively, the header can be omitted and the dmsetup
-parameters can be passed via the kernel command-line in a rooted chain
-of trust where the command-line is verified.
+The verity kernel code does not read the verity metadata on-disk header.
+It only reads the hash blocks which directly follow the header.
+It is expected that a user-space tool will verify the integrity of the
+verity header.
-The on-disk format is especially useful in cases where the hash blocks
-are on a separate partition. The magic number allows easy identification
-of the partition contents. Alternatively, the hash blocks can be stored
-in the same partition as the data to be verified. In such a configuration
-the filesystem on the partition would be sized a little smaller than
-the full-partition, leaving room for the hash blocks.
-
-struct superblock {
- uint8_t signature[8]
- "verity\0\0";
-
- uint8_t version;
- 1 - current format
-
- uint8_t data_block_bits;
- log2(data block size)
-
- uint8_t hash_block_bits;
- log2(hash block size)
-
- uint8_t pad1[1];
- zero padding
-
- uint16_t salt_size;
- big-endian salt size
-
- uint8_t pad2[2];
- zero padding
-
- uint32_t data_blocks_hi;
- big-endian high 32 bits of the 64-bit number of data blocks
-
- uint32_t data_blocks_lo;
- big-endian low 32 bits of the 64-bit number of data blocks
-
- uint8_t algorithm[16];
- cryptographic algorithm
-
- uint8_t salt[384];
- salt (the salt size is specified above)
-
- uint8_t pad3[88];
- zero padding to 512-byte boundary
-}
+Alternatively, the header can be omitted and the dmsetup parameters can
+be passed via the kernel command-line in a rooted chain of trust where
+the command-line is verified.
Directly following the header (and with sector number padded to the next hash
block boundary) are the hash blocks which are stored a depth at a time
(starting from the root), sorted in order of increasing index.
+The full specification of kernel parameters and on-disk metadata format
+is available at the cryptsetup project's wiki page
+ http://code.google.com/p/cryptsetup/wiki/DMVerity
+
Status
======
V (for Valid) is returned if every check performed so far was valid.
@@ -174,21 +134,22 @@
Example
=======
-
-Setup a device:
- dmsetup create vroot --table \
- "0 2097152 "\
- "verity 1 /dev/sda1 /dev/sda2 4096 4096 2097152 1 "\
+Set up a device:
+ # dmsetup create vroot --readonly --table \
+ "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\
"4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
"1234000000000000000000000000000000000000000000000000000000000000"
A command line tool veritysetup is available to compute or verify
-the hash tree or activate the kernel driver. This is available from
-the LVM2 upstream repository and may be supplied as a package called
-device-mapper-verity-tools:
- git://sources.redhat.com/git/lvm2
- http://sourceware.org/git/?p=lvm2.git
- http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/verity?cvsroot=lvm2
+the hash tree or activate the kernel device. This is available from
+the cryptsetup upstream repository http://code.google.com/p/cryptsetup/
+(as a libcryptsetup extension).
-veritysetup -a vroot /dev/sda1 /dev/sda2 \
- 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+Create hash on the device:
+ # veritysetup format /dev/sda1 /dev/sda2
+ ...
+ Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+
+Activate the device:
+ # veritysetup create vroot /dev/sda1 /dev/sda2 \
+ 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
diff --git a/Documentation/devicetree/bindings/arm/olimex.txt b/Documentation/devicetree/bindings/arm/olimex.txt
new file mode 100644
index 0000000..007fb5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/olimex.txt
@@ -0,0 +1,6 @@
+Olimex i.MX Platforms Device Tree Bindings
+------------------------------------------
+
+i.MX23 Olinuxino Low Cost Board
+Required root node properties:
+ - compatible = "olimex,imx23-olinuxino", "fsl,imx23";
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index e78e8bc..f186167 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -47,3 +47,6 @@
- AM335X EVM : Software Developement Board for AM335x
compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
+
+- AM335X Bone : Low cost community board
+ compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
diff --git a/Documentation/devicetree/bindings/arm/tegra/emc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt
similarity index 98%
rename from Documentation/devicetree/bindings/arm/tegra/emc.txt
rename to Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt
index 09335f8..4c33b29 100644
--- a/Documentation/devicetree/bindings/arm/tegra/emc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt
@@ -15,7 +15,7 @@
Example:
- emc@7000f400 {
+ memory-controller@7000f400 {
#address-cells = < 1 >;
#size-cells = < 0 >;
compatible = "nvidia,tegra20-emc";
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
index c25a0a5..866d934 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
@@ -8,7 +8,7 @@
- interrupts : Should contain MC General interrupt.
Example:
- mc {
+ memory-controller@0x7000f000 {
compatible = "nvidia,tegra20-mc";
reg = <0x7000f000 0x024
0x7000f03c 0x3c4>;
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
index e47e73f..bdf1a61 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
@@ -8,7 +8,7 @@
- interrupts : Should contain MC General interrupt.
Example:
- mc {
+ memory-controller {
compatible = "nvidia,tegra30-mc";
reg = <0x7000f000 0x010
0x7000f03c 0x1b4
diff --git a/Documentation/devicetree/bindings/fb/mxsfb.txt b/Documentation/devicetree/bindings/fb/mxsfb.txt
new file mode 100644
index 0000000..b41e5e52
--- /dev/null
+++ b/Documentation/devicetree/bindings/fb/mxsfb.txt
@@ -0,0 +1,19 @@
+* Freescale MXS LCD Interface (LCDIF)
+
+Required properties:
+- compatible: Should be "fsl,<chip>-lcdif". Supported chips include
+ imx23 and imx28.
+- reg: Address and length of the register set for lcdif
+- interrupts: Should contain lcdif interrupts
+
+Optional properties:
+- panel-enable-gpios : Should specify the gpio for panel enable
+
+Examples:
+
+lcdif@80030000 {
+ compatible = "fsl,imx28-lcdif";
+ reg = <0x80030000 2000>;
+ interrupts = <38 86>;
+ panel-enable-gpios = <&gpio3 30 0>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt
similarity index 100%
rename from Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
rename to Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt
diff --git a/Documentation/devicetree/bindings/input/fsl-mma8450.txt b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
index a00c94c..0b96e57 100644
--- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt
+++ b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
@@ -2,6 +2,7 @@
Required properties:
- compatible : "fsl,mma8450".
+- reg: the I2C address of MMA8450
Example:
diff --git a/Documentation/devicetree/bindings/input/tegra-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
similarity index 100%
rename from Documentation/devicetree/bindings/input/tegra-kbc.txt
rename to Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
index 19f6af4..baf0798 100644
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -46,8 +46,8 @@
ecspi@70010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
- <&gpio3 25 0>; /* GPIO4_25 */
+ cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
+ <&gpio4 25 0>; /* GPIO4_25 */
status = "okay";
pmic: mc13892@0 {
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index c7e404b..fea541e 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -29,6 +29,6 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70008000 0x4000>;
interrupts = <2>;
- cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
- wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+ wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
};
diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
similarity index 100%
rename from Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt
rename to Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index 7ab9e1a..4616fc2 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -19,6 +19,6 @@
reg = <0x83fec000 0x4000>;
interrupts = <87>;
phy-mode = "mii";
- phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
local-mac-address = [00 04 9F 01 1B B9];
};
diff --git a/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
similarity index 100%
rename from Documentation/devicetree/bindings/nvec/nvec_nvidia.txt
rename to Documentation/devicetree/bindings/nvec/nvidia,nvec.txt
diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
new file mode 100644
index 0000000..b800070
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt
@@ -0,0 +1,16 @@
+* STMP3xxx/i.MX28 Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+ * "fsl,stmp3xxx-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: rtc alarm interrupt
+
+Example:
+
+rtc@80056000 {
+ compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+ reg = <0x80056000 2000>;
+ interrupts = <29>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra-audio-alc5632.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt
diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra-audio-wm8903.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
diff --git a/Documentation/devicetree/bindings/sound/tegra20-das.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra20-das.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt
diff --git a/Documentation/devicetree/bindings/sound/tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
similarity index 100%
rename from Documentation/devicetree/bindings/sound/tegra20-i2s.txt
rename to Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 9841057..4256a6d 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -17,6 +17,6 @@
reg = <0x70010000 0x4000>;
interrupts = <36>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
- <&gpio3 25 0>; /* GPIO4_25 */
+ cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
+ <&gpio3 25 0>; /* GPIO3_25 */
};
diff --git a/Documentation/devicetree/bindings/spi/spi_nvidia.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
similarity index 100%
rename from Documentation/devicetree/bindings/spi/spi_nvidia.txt
rename to Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
new file mode 100644
index 0000000..2ee903f
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
@@ -0,0 +1,27 @@
+* Freescale MXS Application UART (AUART)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
+ imx23 and imx28.
+- reg : Address and length of the register set for the device
+- interrupts : Should contain the auart interrupt numbers
+
+Example:
+auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112 70 71>;
+};
+
+Note: Each auart port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+ serial0 = &auart0;
+ serial1 = &auart1;
+ serial2 = &auart2;
+ serial3 = &auart3;
+ serial4 = &auart4;
+};
diff --git a/Documentation/devicetree/bindings/usb/tegra-usb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
similarity index 100%
rename from Documentation/devicetree/bindings/usb/tegra-usb.txt
rename to Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 6eab917..db4d3af 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -3,6 +3,7 @@
This isn't an exhaustive list, but you should add new prefixes to it before
using them to avoid name-space collisions.
+ad Avionic Design GmbH
adi Analog Devices, Inc.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
apm Applied Micro Circuits Corporation (APM)
diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
new file mode 100644
index 0000000..c227970
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt
@@ -0,0 +1,14 @@
+TI Watchdog Timer (WDT) Controller for OMAP
+
+Required properties:
+compatible:
+- "ti,omap3-wdt" for OMAP3
+- "ti,omap4-wdt" for OMAP4
+- ti,hwmods: Name of the hwmod associated to the WDT
+
+Examples:
+
+wdt2: wdt@4a314000 {
+ compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ ti,hwmods = "wd_timer2";
+};
diff --git a/Documentation/prctl/no_new_privs.txt b/Documentation/prctl/no_new_privs.txt
new file mode 100644
index 0000000..f7be84f
--- /dev/null
+++ b/Documentation/prctl/no_new_privs.txt
@@ -0,0 +1,57 @@
+The execve system call can grant a newly-started program privileges that
+its parent did not have. The most obvious examples are setuid/setgid
+programs and file capabilities. To prevent the parent program from
+gaining these privileges as well, the kernel and user code must be
+careful to prevent the parent from doing anything that could subvert the
+child. For example:
+
+ - The dynamic loader handles LD_* environment variables differently if
+ a program is setuid.
+
+ - chroot is disallowed to unprivileged processes, since it would allow
+ /etc/passwd to be replaced from the point of view of a process that
+ inherited chroot.
+
+ - The exec code has special handling for ptrace.
+
+These are all ad-hoc fixes. The no_new_privs bit (since Linux 3.5) is a
+new, generic mechanism to make it safe for a process to modify its
+execution environment in a manner that persists across execve. Any task
+can set no_new_privs. Once the bit is set, it is inherited across fork,
+clone, and execve and cannot be unset. With no_new_privs set, execve
+promises not to grant the privilege to do anything that could not have
+been done without the execve call. For example, the setuid and setgid
+bits will no longer change the uid or gid; file capabilities will not
+add to the permitted set, and LSMs will not relax constraints after
+execve.
+
+To set no_new_privs, use prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0).
+
+Be careful, though: LSMs might also not tighten constraints on exec
+in no_new_privs mode. (This means that setting up a general-purpose
+service launcher to set no_new_privs before execing daemons may
+interfere with LSM-based sandboxing.)
+
+Note that no_new_privs does not prevent privilege changes that do not
+involve execve. An appropriately privileged task can still call
+setuid(2) and receive SCM_RIGHTS datagrams.
+
+There are two main use cases for no_new_privs so far:
+
+ - Filters installed for the seccomp mode 2 sandbox persist across
+ execve and can change the behavior of newly-executed programs.
+ Unprivileged users are therefore only allowed to install such filters
+ if no_new_privs is set.
+
+ - By itself, no_new_privs can be used to reduce the attack surface
+ available to an unprivileged user. If everything running with a
+ given uid has no_new_privs set, then that uid will be unable to
+ escalate its privileges by directly attacking setuid, setgid, and
+ fcap-using binaries; it will need to compromise something without the
+ no_new_privs bit set first.
+
+In the future, other potentially dangerous kernel features could become
+available to unprivileged tasks if no_new_privs is set. In principle,
+several options to unshare(2) and clone(2) would be safe when
+no_new_privs is set, and no_new_privs + chroot is considerable less
+dangerous than chroot by itself.
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 9301266..2c99483 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1930,6 +1930,23 @@
PTE's RPN field (ie, it needs to be shifted left by 12 to OR it
into the hash PTE second double word).
+4.75 KVM_IRQFD
+
+Capability: KVM_CAP_IRQFD
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqfd (in)
+Returns: 0 on success, -1 on error
+
+Allows setting an eventfd to directly trigger a guest interrupt.
+kvm_irqfd.fd specifies the file descriptor to use as the eventfd and
+kvm_irqfd.gsi specifies the irqchip pin toggled by this event. When
+an event is tiggered on the eventfd, an interrupt is injected into
+the guest using the specified gsi pin. The irqfd is removed using
+the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
+and kvm_irqfd.gsi.
+
+
5. The kvm_run structure
------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index eb22272..03df1d1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4654,8 +4654,8 @@
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
+T: git git://1984.lsi.us.es/nf
+T: git git://1984.lsi.us.es/nf-next
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
diff --git a/Makefile b/Makefile
index 81ea154..bf02707 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 5
SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a91009c6..8b0b743 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -913,7 +913,7 @@
select ARM_AMBA
select ARM_VIC
select CPU_ARM926T
- select CLKDEV_LOOKUP
+ select COMMON_CLK
select GENERIC_CLOCKEVENTS
select PINCTRL
select MIGHT_HAVE_CACHE_L2X0
@@ -1021,8 +1021,6 @@
source "arch/arm/mach-ks8695/Kconfig"
-source "arch/arm/mach-lpc32xx/Kconfig"
-
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
new file mode 100644
index 0000000..29b9f15
--- /dev/null
+++ b/arch/arm/boot/dts/aks-cdu.dts
@@ -0,0 +1,113 @@
+/*
+ * aks-cdu.dts - Device Tree file for AK signal CDU
+ *
+ * Copyright (C) 2012 AK signal Brno a.s.
+ * 2012 Jiri Prchal <jiri.prchal@aksignal.cz>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "ge863-pro3.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
+ };
+
+ ahb {
+ apb {
+ usart0: serial@fffb0000 {
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 0>;
+ };
+
+ usart2: serial@fffb8000 {
+ status = "okay";
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 0>;
+ };
+
+ usart3: serial@fffd0000 {
+ status = "okay";
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 0>;
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 15 0>;
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ uboot@40000 {
+ label = "uboot";
+ reg = <0x40000 0x80000>;
+ };
+ ubootenv@c0000 {
+ label = "ubootenv";
+ reg = <0xc0000 0x40000>;
+ };
+ kernel@100000 {
+ label = "kernel";
+ reg = <0x100000 0x400000>;
+ };
+ rootfs@500000 {
+ label = "rootfs";
+ reg = <0x500000 0x7b00000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ red {
+ gpios = <&pioC 10 0>;
+ linux,default-trigger = "none";
+ };
+
+ green {
+ gpios = <&pioA 5 1>;
+ linux,default-trigger = "none";
+ default-state = "on";
+ };
+
+ yellow {
+ gpios = <&pioB 20 1>;
+ linux,default-trigger = "none";
+ };
+
+ blue {
+ gpios = <&pioB 21 1>;
+ linux,default-trigger = "none";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
new file mode 100644
index 0000000..a9af4db
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+ model = "TI AM335x BeagleBone";
+ compatible = "ti,am335x-bone", "ti,am33xx";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
new file mode 100644
index 0000000..d6a97d9
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+ model = "TI AM335x EVM";
+ compatible = "ti,am335x-evm", "ti,am33xx";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
new file mode 100644
index 0000000..59509c4
--- /dev/null
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -0,0 +1,158 @@
+/*
+ * Device Tree Source for AM33XX SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,am33xx";
+
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the AM33XX interconnect.
+ * The real AM33XX interconnect network is quite complex.Since
+ * that will not bring real advantage to represent that in DT
+ * for the moment, just use a fake OCP bus entry to represent
+ * the whole bus hierarchy.
+ */
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,omap2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,intc-size = <128>;
+ reg = <0x48200000 0x1000>;
+ };
+
+ gpio1: gpio@44e07000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio1";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@4804C000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@481AC000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio3";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio4: gpio@481AE000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio4";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ uart1: serial@44E09000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart1";
+ clock-frequency = <48000000>;
+ };
+
+ uart2: serial@48022000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart2";
+ clock-frequency = <48000000>;
+ };
+
+ uart3: serial@48024000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart3";
+ clock-frequency = <48000000>;
+ };
+
+ uart4: serial@481A6000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
+
+ uart5: serial@481A8000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart5";
+ clock-frequency = <48000000>;
+ };
+
+ uart6: serial@481AA000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart6";
+ clock-frequency = <48000000>;
+ };
+
+ i2c1: i2c@44E0B000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@4802A000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@4819C000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
new file mode 100644
index 0000000..474f760
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TI AM3517 EVM (AM3517/05)";
+ compatible = "ti,am3517-evm", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
diff --git a/arch/arm/boot/dts/cfa10036.dts b/arch/arm/boot/dts/cfa10036.dts
new file mode 100644
index 0000000..c03a577b
--- /dev/null
+++ b/arch/arm/boot/dts/cfa10036.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+ model = "Crystalfontz CFA-10036 Board";
+ compatible = "crystalfontz,cfa10036", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <4>;
+ status = "okay";
+ };
+ };
+
+ apbx@80040000 {
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_b>;
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ gpios = <&gpio3 4 1>;
+ default-state = "on";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts
new file mode 100644
index 0000000..d79b28d
--- /dev/null
+++ b/arch/arm/boot/dts/ea3250.dts
@@ -0,0 +1,174 @@
+/*
+ * Embedded Artists LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "lpc32xx.dtsi"
+
+/ {
+ model = "Embedded Artists LPC3250 board based on NXP LPC3250";
+ compatible = "ea,ea3250", "nxp,lpc3250";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x4000000>;
+ };
+
+ ahb {
+ mac: ethernet@31060000 {
+ phy-mode = "rmii";
+ use-iram;
+ };
+
+ /* Here, choose exactly one from: ohci, usbd */
+ ohci@31020000 {
+ transceiver = <&isp1301>;
+ status = "okay";
+ };
+
+/*
+ usbd@31020000 {
+ transceiver = <&isp1301>;
+ status = "okay";
+ };
+*/
+
+ /* 128MB Flash via SLC NAND controller */
+ slc: flash@20020000 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nxp,wdr-clks = <14>;
+ nxp,wwidth = <260000000>;
+ nxp,whold = <104000000>;
+ nxp,wsetup = <200000000>;
+ nxp,rdr-clks = <14>;
+ nxp,rwidth = <34666666>;
+ nxp,rhold = <104000000>;
+ nxp,rsetup = <200000000>;
+ nand-on-flash-bbt;
+ gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+ mtd0@00000000 {
+ label = "ea3250-boot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+
+ mtd1@00080000 {
+ label = "ea3250-uboot";
+ reg = <0x00080000 0x000c0000>;
+ read-only;
+ };
+
+ mtd2@00140000 {
+ label = "ea3250-kernel";
+ reg = <0x00140000 0x00400000>;
+ };
+
+ mtd3@00540000 {
+ label = "ea3250-rootfs";
+ reg = <0x00540000 0x07ac0000>;
+ };
+ };
+
+ apb {
+ uart5: serial@40090000 {
+ status = "okay";
+ };
+
+ uart3: serial@40080000 {
+ status = "okay";
+ };
+
+ uart6: serial@40098000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@400A0000 {
+ clock-frequency = <100000>;
+
+ eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+ };
+
+ eeprom@57 {
+ compatible = "at,24c64";
+ reg = <0x57>;
+ };
+
+ uda1380: uda1380@18 {
+ compatible = "nxp,uda1380";
+ reg = <0x18>;
+ power-gpio = <&gpio 0x59 0>;
+ reset-gpio = <&gpio 0x51 0>;
+ dac-clk = "wspll";
+ };
+
+ pca9532: pca9532@60 {
+ compatible = "nxp,pca9532";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x60>;
+ };
+ };
+
+ i2c2: i2c@400A8000 {
+ clock-frequency = <100000>;
+ };
+
+ i2cusb: i2c@31020300 {
+ clock-frequency = <100000>;
+
+ isp1301: usb-transceiver@2d {
+ compatible = "nxp,isp1301";
+ reg = <0x2d>;
+ };
+ };
+
+ sd@20098000 {
+ wp-gpios = <&pca9532 5 0>;
+ cd-gpios = <&pca9532 4 0>;
+ cd-inverted;
+ bus-width = <4>;
+ status = "okay";
+ };
+ };
+
+ fab {
+ uart1: serial@40014000 {
+ status = "okay";
+ };
+
+ /* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
+ adc@40048000 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ button@21 {
+ label = "GPIO Key UP";
+ linux,code = <103>;
+ gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
new file mode 100644
index 0000000..b7354e6
--- /dev/null
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -0,0 +1,41 @@
+/*
+ * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ * 2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "ge863-pro3.dtsi"
+
+/ {
+ model = "Telit EVK-PRO3 for Telit GE863-PRO3";
+ compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9";
+
+ ahb {
+ apb {
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 0>;
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+ };
+
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
new file mode 100644
index 0000000..17136fc
--- /dev/null
+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
@@ -0,0 +1,52 @@
+/*
+ * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
+ *
+ * Copyright (C) 2012 Telit,
+ * 2012 Fabio Porcedda <fabio.porcedda@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "at91sam9260.dtsi"
+
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <6000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ boot@0 {
+ label = "boot";
+ reg = <0x0 0x7c0000>;
+ };
+
+ root@07c0000 {
+ label = "root";
+ reg = <0x7c0000 0x7840000>;
+ };
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs";
+ };
+};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 70bffa9..e3486f4 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -22,17 +22,60 @@
apb@80000000 {
apbh@80000000 {
+ gpmi-nand@8000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
+ status = "okay";
+ };
+
ssp0: ssp@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>;
- bus-width = <8>;
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+ bus-width = <4>;
wp-gpios = <&gpio1 30 0>;
+ vmmc-supply = <®_vddio_sd0>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog-gpios@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
+ 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
+ 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_24bit_pins_a>;
+ panel-enable-gpios = <&gpio1 18 0>;
status = "okay";
};
};
apbx@80040000 {
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pins_a>;
+ status = "okay";
+ };
+
+ auart0: serial@8006c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_pins_a>;
+ status = "okay";
+ };
+
duart: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
@@ -40,4 +83,23 @@
};
};
};
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_vddio_sd0: vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 29 0>;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 2 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
new file mode 100644
index 0000000..20912b1
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx23.dtsi"
+
+/ {
+ model = "i.MX23 Olinuxino Low Cost Board";
+ compatible = "olimex,imx23-olinuxino", "fsl,imx23";
+
+ memory {
+ reg = <0x40000000 0x04000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx23-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+ bus-width = <4>;
+ status = "okay";
+ };
+ };
+
+ apbx@80040000 {
+ duart: serial@80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 8c5f999..a874dbf 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -18,6 +18,8 @@
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
+ serial0 = &auart0;
+ serial1 = &auart1;
};
cpus {
@@ -57,13 +59,15 @@
status = "disabled";
};
- bch@8000a000 {
- reg = <0x8000a000 2000>;
- status = "disabled";
- };
-
- gpmi@8000c000 {
- reg = <0x8000c000 2000>;
+ gpmi-nand@8000c000 {
+ compatible = "fsl,imx23-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <13>, <56>;
+ interrupt-names = "gpmi-dma", "bch";
+ fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
@@ -114,24 +118,151 @@
duart_pins_a: duart@0 {
reg = <0>;
- fsl,pinmux-ids = <0x11a2 0x11b2>;
+ fsl,pinmux-ids = <
+ 0x11a2 /* MX23_PAD_PWM0__DUART_RX */
+ 0x11b2 /* MX23_PAD_PWM1__DUART_TX */
+ >;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+ auart0_pins_a: auart0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
+ 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
+ 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
+ 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_pins_a: gpmi-nand@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
+ 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
+ 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
+ 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
+ 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
+ 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
+ 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
+ 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
+ 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
+ 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
+ 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
+ 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
+ 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
+ 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
+ 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
+ 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
+ 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_pins_fixup: gpmi-pins-fixup {
+ fsl,pinmux-ids = <
+ 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
+ 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
+ 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
+ >;
+ fsl,drive-strength = <2>;
+ };
+
+ mmc0_4bit_pins_a: mmc0-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
+ 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
+ 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
+ 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
+ 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
+ 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+ 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
- fsl,pinmux-ids = <0x2020 0x2030 0x2040
- 0x2050 0x0082 0x0092 0x00a2
- 0x00b2 0x2000 0x2010 0x2060>;
+ fsl,pinmux-ids = <
+ 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
+ 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
+ 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
+ 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
+ 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
+ 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
+ 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
+ 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
+ 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
+ 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+ 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_pins_fixup: mmc0-pins-fixup {
- fsl,pinmux-ids = <0x2010 0x2060>;
+ fsl,pinmux-ids = <
+ 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+ 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+ >;
+ fsl,pull-up = <0>;
+ };
+
+ pwm2_pins_a: pwm2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x11c0 /* MX23_PAD_PWM2__PWM2 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_24bit_pins_a: lcdif-24bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
+ 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
+ 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
+ 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
+ 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
+ 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
+ 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
+ 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
+ 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
+ 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
+ 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
+ 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
+ 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
@@ -172,7 +303,9 @@
};
lcdif@80030000 {
+ compatible = "fsl,imx23-lcdif";
reg = <0x80030000 2000>;
+ interrupts = <46 45>;
status = "disabled";
};
@@ -242,12 +375,16 @@
};
rtc@8005c000 {
+ compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
reg = <0x8005c000 2000>;
- status = "disabled";
+ interrupts = <22>;
};
- pwm@80064000 {
+ pwm: pwm@80064000 {
+ compatible = "fsl,imx23-pwm";
reg = <0x80064000 2000>;
+ #pwm-cells = <2>;
+ fsl,pwm-number = <5>;
status = "disabled";
};
@@ -257,12 +394,16 @@
};
auart0: serial@8006c000 {
+ compatible = "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
+ interrupts = <24 25 23>;
status = "disabled";
};
auart1: serial@8006e000 {
+ compatible = "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
+ interrupts = <59 60 58>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts
new file mode 100644
index 0000000..d3f8296
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-3ds.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx27.dtsi"
+
+/ {
+ model = "mx27_3ds";
+ compatible = "freescale,imx27-3ds", "fsl,imx27";
+
+ memory {
+ reg = <0x0 0x0>;
+ };
+
+ soc {
+ aipi@10000000 { /* aipi */
+
+ wdog@10002000 {
+ status = "okay";
+ };
+
+ uart@1000a000 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ fec@1002b000 {
+ status = "okay";
+ };
+ };
+ };
+
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index ee520a5..0d8739d 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -22,6 +22,12 @@
apb@80000000 {
apbh@80000000 {
+ gpmi-nand@8000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+ status = "okay";
+ };
+
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
@@ -29,6 +35,7 @@
&mmc0_cd_cfg &mmc0_sck_cfg>;
bus-width = <8>;
wp-gpios = <&gpio2 12 0>;
+ vmmc-supply = <®_vddio_sd0>;
status = "okay";
};
@@ -36,6 +43,45 @@
compatible = "fsl,imx28-mmc";
bus-width = <8>;
wp-gpios = <&gpio0 28 0>;
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog-gpios@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
+ 0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
+ 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
+ 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
+ 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_24bit_pins_a>;
+ panel-enable-gpios = <&gpio3 30 0>;
+ status = "okay";
+ };
+
+ can0: can@80032000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0_pins_a>;
+ status = "okay";
+ };
+
+ can1: can@80034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can1_pins_a>;
status = "okay";
};
};
@@ -68,11 +114,29 @@
};
};
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pins_a>;
+ status = "okay";
+ };
+
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
+
+ auart0: serial@8006a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_pins_a>;
+ status = "okay";
+ };
+
+ auart3: serial@80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart3_pins_a>;
+ status = "okay";
+ };
};
};
@@ -81,6 +145,9 @@
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
+ phy-supply = <®_fec_3v3>;
+ phy-reset-gpios = <&gpio4 13 0>;
+ phy-reset-duration = <100>;
status = "okay";
};
@@ -102,6 +169,22 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ reg_vddio_sd0: vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 28 0>;
+ };
+
+ reg_fec_3v3: fec-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "fec-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 15 0>;
+ };
};
sound {
@@ -111,4 +194,21 @@
saif-controllers = <&saif0 &saif1>;
audio-codec = <&sgtl5000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio3 5 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 2 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 4634cb8..adb5ffc 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -22,6 +22,11 @@
gpio4 = &gpio4;
saif0 = &saif0;
saif1 = &saif1;
+ serial0 = &auart0;
+ serial1 = &auart1;
+ serial2 = &auart2;
+ serial3 = &auart3;
+ serial4 = &auart4;
};
cpus {
@@ -68,15 +73,15 @@
status = "disabled";
};
- bch@8000a000 {
- reg = <0x8000a000 2000>;
- interrupts = <41>;
- status = "disabled";
- };
-
- gpmi@8000c000 {
- reg = <0x8000c000 2000>;
- interrupts = <42 88>;
+ gpmi-nand@8000c000 {
+ compatible = "fsl,imx28-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8000c000 2000>, <0x8000a000 2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <88>, <41>;
+ interrupt-names = "gpmi-dma", "bch";
+ fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
@@ -161,7 +166,82 @@
duart_pins_a: duart@0 {
reg = <0>;
- fsl,pinmux-ids = <0x3102 0x3112>;
+ fsl,pinmux-ids = <
+ 0x3102 /* MX28_PAD_PWM0__DUART_RX */
+ 0x3112 /* MX28_PAD_PWM1__DUART_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ duart_pins_b: duart@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
+ 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_pins_a: gpmi-nand@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
+ 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
+ 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
+ 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
+ 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
+ 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
+ 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
+ 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
+ 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
+ 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
+ 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
+ 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
+ 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
+ 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
+ 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
+ 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
+ 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ gpmi_status_cfg: gpmi-status-cfg {
+ fsl,pinmux-ids = <
+ 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
+ 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
+ 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+ >;
+ fsl,drive-strength = <2>;
+ };
+
+ auart0_pins_a: auart0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
+ 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+ 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
+ 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart3_pins_a: auart3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
+ 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+ 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
+ 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
+ >;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
@@ -169,9 +249,17 @@
mac0_pins_a: mac0@0 {
reg = <0>;
- fsl,pinmux-ids = <0x4000 0x4010 0x4020
- 0x4030 0x4040 0x4060 0x4070
- 0x4080 0x4100>;
+ fsl,pinmux-ids = <
+ 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
+ 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
+ 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
+ 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
+ 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
+ 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
+ 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
+ 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
+ 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -179,8 +267,14 @@
mac1_pins_a: mac1@0 {
reg = <0>;
- fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
- 0x40e1 0x40b1 0x40c1>;
+ fsl,pinmux-ids = <
+ 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
+ 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
+ 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
+ 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
+ 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
+ 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -188,28 +282,61 @@
mmc0_8bit_pins_a: mmc0-8bit@0 {
reg = <0>;
- fsl,pinmux-ids = <0x2000 0x2010 0x2020
- 0x2030 0x2040 0x2050 0x2060
- 0x2070 0x2080 0x2090 0x20a0>;
+ fsl,pinmux-ids = <
+ 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
+ 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
+ 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
+ 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
+ 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
+ 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
+ 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
+ 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
+ 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
+ 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+ 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ mmc0_4bit_pins_a: mmc0-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
+ 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
+ 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
+ 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
+ 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
+ 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+ 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
mmc0_cd_cfg: mmc0-cd-cfg {
- fsl,pinmux-ids = <0x2090>;
+ fsl,pinmux-ids = <
+ 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+ >;
fsl,pull-up = <0>;
};
mmc0_sck_cfg: mmc0-sck-cfg {
- fsl,pinmux-ids = <0x20a0>;
+ fsl,pinmux-ids = <
+ 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+ >;
fsl,drive-strength = <2>;
fsl,pull-up = <0>;
};
i2c0_pins_a: i2c0@0 {
reg = <0>;
- fsl,pinmux-ids = <0x3180 0x3190>;
+ fsl,pinmux-ids = <
+ 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
+ 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
+ >;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -217,8 +344,12 @@
saif0_pins_a: saif0@0 {
reg = <0>;
- fsl,pinmux-ids =
- <0x3140 0x3150 0x3160 0x3170>;
+ fsl,pinmux-ids = <
+ 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
+ 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
+ 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
+ 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+ >;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
@@ -226,11 +357,82 @@
saif1_pins_a: saif1@0 {
reg = <0>;
- fsl,pinmux-ids = <0x31a0>;
+ fsl,pinmux-ids = <
+ 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
+ >;
fsl,drive-strength = <2>;
fsl,voltage = <1>;
fsl,pull-up = <1>;
};
+
+ pwm2_pins_a: pwm2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3120 /* MX28_PAD_PWM2__PWM_2 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_24bit_pins_a: lcdif-24bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+ 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+ 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+ 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
+ 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
+ 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
+ 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
+ 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
+ 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ can0_pins_a: can0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
+ 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ can1_pins_a: can1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
+ 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
};
digctl@8001c000 {
@@ -272,18 +474,21 @@
};
lcdif@80030000 {
+ compatible = "fsl,imx28-lcdif";
reg = <0x80030000 2000>;
interrupts = <38 86>;
status = "disabled";
};
can0: can@80032000 {
+ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
reg = <0x80032000 2000>;
interrupts = <8>;
status = "disabled";
};
can1: can@80034000 {
+ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
reg = <0x80034000 2000>;
interrupts = <9>;
status = "disabled";
@@ -370,9 +575,9 @@
};
rtc@80056000 {
+ compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
reg = <0x80056000 2000>;
- interrupts = <28 29>;
- status = "disabled";
+ interrupts = <29>;
};
i2c0: i2c@80058000 {
@@ -393,8 +598,11 @@
status = "disabled";
};
- pwm@80064000 {
+ pwm: pwm@80064000 {
+ compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
reg = <0x80064000 2000>;
+ #pwm-cells = <2>;
+ fsl,pwm-number = <8>;
status = "disabled";
};
@@ -404,30 +612,35 @@
};
auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
interrupts = <112 70 71>;
status = "disabled";
};
auart1: serial@8006c000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <113 72 73>;
status = "disabled";
};
auart2: serial@8006e000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
interrupts = <114 74 75>;
status = "disabled";
};
auart3: serial@80070000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80070000 0x2000>;
interrupts = <115 76 77>;
status = "disabled";
};
auart4: serial@80072000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80072000 0x2000>;
interrupts = <116 78 79>;
status = "disabled";
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
new file mode 100644
index 0000000..24731cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx31-bug.dts
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx31.dtsi"
+
+/ {
+ model = "Buglabs i.MX31 Bug 1.x";
+ compatible = "fsl,imx31-bug", "fsl,imx31";
+
+ memory {
+ reg = <0x80000000 0x8000000>; /* 128M */
+ };
+
+ soc {
+ aips@43f00000 { /* AIPS1 */
+ uart5: serial@43fb4000 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
new file mode 100644
index 0000000..eef7099
--- /dev/null
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ };
+
+ avic: avic-interrupt-controller@60000000 {
+ compatible = "fsl,imx31-avic", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x60000000 0x100000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&avic>;
+ ranges;
+
+ aips@43f00000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x43f00000 0x100000>;
+ ranges;
+
+ uart1: serial@43f90000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ status = "disabled";
+ };
+
+ uart2: serial@43f94000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43f94000 0x4000>;
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ uart4: serial@43fb0000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43fb0000 0x4000>;
+ interrupts = <46>;
+ status = "disabled";
+ };
+
+ uart5: serial@43fb4000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x43fb4000 0x4000>;
+ interrupts = <47>;
+ status = "disabled";
+ };
+ };
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x100000>;
+ ranges;
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 3f5dad8..c5f37fb 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -35,13 +35,14 @@
slc: flash@20020000 {
compatible = "nxp,lpc3220-slc";
reg = <0x20020000 0x1000>;
- status = "disable";
+ status = "disabled";
};
- mlc: flash@200B0000 {
+ mlc: flash@200a8000 {
compatible = "nxp,lpc3220-mlc";
- reg = <0x200B0000 0x1000>;
- status = "disable";
+ reg = <0x200a8000 0x11000>;
+ interrupts = <11 0>;
+ status = "disabled";
};
dma@31000000 {
@@ -57,21 +58,21 @@
compatible = "nxp,ohci-nxp", "usb-ohci";
reg = <0x31020000 0x300>;
interrupts = <0x3b 0>;
- status = "disable";
+ status = "disabled";
};
usbd@31020000 {
compatible = "nxp,lpc3220-udc";
reg = <0x31020000 0x300>;
interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
- status = "disable";
+ status = "disabled";
};
clcd@31040000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0x31040000 0x1000>;
interrupts = <0x0e 0>;
- status = "disable";
+ status = "disabled";
};
mac: ethernet@31060000 {
@@ -114,9 +115,10 @@
};
sd@20098000 {
- compatible = "arm,pl180", "arm,primecell";
+ compatible = "arm,pl18x", "arm,primecell";
reg = <0x20098000 0x1000>;
interrupts = <0x0f 0>, <0x0d 0>;
+ status = "disabled";
};
i2s1: i2s@2009C000 {
@@ -124,24 +126,42 @@
reg = <0x2009C000 0x1000>;
};
+ /* UART5 first since it is the default console, ttyS0 */
+ uart5: serial@40090000 {
+ /* actually, ns16550a w/ 64 byte fifos! */
+ compatible = "nxp,lpc3220-uart";
+ reg = <0x40090000 0x1000>;
+ interrupts = <9 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
uart3: serial@40080000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-uart";
reg = <0x40080000 0x1000>;
+ interrupts = <7 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
};
uart4: serial@40088000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-uart";
reg = <0x40088000 0x1000>;
- };
-
- uart5: serial@40090000 {
- compatible = "nxp,serial";
- reg = <0x40090000 0x1000>;
+ interrupts = <8 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
};
uart6: serial@40098000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-uart";
reg = <0x40098000 0x1000>;
+ interrupts = <10 0>;
+ clock-frequency = <13000000>;
+ reg-shift = <2>;
+ status = "disabled";
};
i2c1: i2c@400A0000 {
@@ -192,18 +212,24 @@
};
uart1: serial@40014000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-hsuart";
reg = <0x40014000 0x1000>;
+ interrupts = <26 0>;
+ status = "disabled";
};
uart2: serial@40018000 {
- compatible = "nxp,serial";
+ compatible = "nxp,lpc3220-hsuart";
reg = <0x40018000 0x1000>;
+ interrupts = <25 0>;
+ status = "disabled";
};
- uart7: serial@4001C000 {
- compatible = "nxp,serial";
- reg = <0x4001C000 0x1000>;
+ uart7: serial@4001c000 {
+ compatible = "nxp,lpc3220-hsuart";
+ reg = <0x4001c000 0x1000>;
+ interrupts = <24 0>;
+ status = "disabled";
};
rtc@40024000 {
@@ -235,19 +261,21 @@
compatible = "nxp,lpc3220-adc";
reg = <0x40048000 0x1000>;
interrupts = <0x27 0>;
- status = "disable";
+ status = "disabled";
};
tsc@40048000 {
compatible = "nxp,lpc3220-tsc";
reg = <0x40048000 0x1000>;
interrupts = <0x27 0>;
- status = "disable";
+ status = "disabled";
};
key@40050000 {
compatible = "nxp,lpc3220-key";
reg = <0x40050000 0x1000>;
+ interrupts = <54 0>;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
new file mode 100644
index 0000000..25b50b7
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap2.dtsi"
+
+/ {
+ model = "TI OMAP2420 H4 board";
+ compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x84000000>; /* 64 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index 2eee16e..f349ee9 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -18,3 +18,31 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ /*
+ * TVP5146 Video decoder-in for analog input support.
+ */
+ tvp5146@5c {
+ compatible = "ti,tvp5146m2";
+ reg = <0x5c>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 99474fa..8109471 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -215,5 +215,10 @@
compatible = "ti,omap3-hsmmc";
ti,hwmods = "mmc3";
};
+
+ wdt2: wdt@48314000 {
+ compatible = "ti,omap3-wdt";
+ ti,hwmods = "wd_timer2";
+ };
};
};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 1efe0c5..f57f5e8 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -32,6 +32,30 @@
linux,default-trigger = "mmc0";
};
};
+
+ sound: sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "PandaBoard";
+
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+ };
};
&i2c1 {
@@ -43,6 +67,19 @@
interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+ interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+ interrupt-parent = <&gic>;
+ ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+ };
};
/include/ "twl6030.dtsi"
diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-pandaES.dts
new file mode 100644
index 0000000..d4ba43a
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-pandaES.dts
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/include/ "omap4-panda.dts"
+
+/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
+&sound {
+ ti,model = "PandaBoardES";
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "AFML", "Line In",
+ "AFMR", "Line In";
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index d08c4d1..a18cf103 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -28,6 +28,14 @@
regulator-boot-on;
};
+ vbat: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT";
+ regulator-min-microvolt = <3750000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-boot-on;
+ };
+
leds {
compatible = "gpio-leds";
debug0 {
@@ -70,6 +78,41 @@
gpios = <&gpio5 11 0>; /* 139 */
};
};
+
+ sound {
+ compatible = "ti,abe-twl6040";
+ ti,model = "SDP4430";
+
+ ti,jack-detection = <1>;
+ ti,mclk-freq = <38400000>;
+
+ ti,mcpdm = <&mcpdm>;
+ ti,dmic = <&dmic>;
+
+ ti,twl6040 = <&twl6040>;
+
+ /* Audio routing */
+ ti,audio-routing =
+ "Headset Stereophone", "HSOL",
+ "Headset Stereophone", "HSOR",
+ "Earphone Spk", "EP",
+ "Ext Spk", "HFL",
+ "Ext Spk", "HFR",
+ "Line Out", "AUXL",
+ "Line Out", "AUXR",
+ "Vibrator", "VIBRAL",
+ "Vibrator", "VIBRAR",
+ "HSMIC", "Headset Mic",
+ "Headset Mic", "Headset Mic Bias",
+ "MAINMIC", "Main Handset Mic",
+ "Main Handset Mic", "Main Mic Bias",
+ "SUBMIC", "Sub Handset Mic",
+ "Sub Handset Mic", "Main Mic Bias",
+ "AFML", "Line In",
+ "AFMR", "Line In",
+ "DMic", "Digital Mic",
+ "Digital Mic", "Digital Mic1 Bias";
+ };
};
&i2c1 {
@@ -81,6 +124,31 @@
interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
+
+ twl6040: twl@4b {
+ compatible = "ti,twl6040";
+ reg = <0x4b>;
+ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+ interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+ interrupt-parent = <&gic>;
+ ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+
+ vio-supply = <&v1v8>;
+ v2v1-supply = <&v2v1>;
+ enable-active-high;
+
+ /* regulators for vibra motor */
+ vddvibl-supply = <&vbat>;
+ vddvibr-supply = <&vbat>;
+
+ vibra {
+ /* Vibra driver, motor resistance parameters */
+ ti,vibldrv-res = <8>;
+ ti,vibrdrv-res = <3>;
+ ti,viblmotor-res = <10>;
+ ti,vibrmotor-res = <10>;
+ };
+ };
};
/include/ "twl6030.dtsi"
diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var_som.dts
new file mode 100644
index 0000000..6601e6a
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-var_som.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "Variscite OMAP4 SOM";
+ compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+
+ vdd_eth: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_ETH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+ interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+ interrupt-parent = <&gic>;
+ };
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ /*
+ * Temperature Sensor
+ * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+ */
+ tmp105@49 {
+ compatible = "ti,tmp105";
+ reg = <0x49>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+};
+
+&mcspi1 {
+ eth@0 {
+ compatible = "ks8851";
+ spi-max-frequency = <24000000>;
+ reg = <0>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11>; /* gpio line 171 */
+ vdd-supply = <&vdd_eth>;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmc>;
+ ti,bus-width = <8>;
+ ti,non-removable;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&mmc4 {
+ status = "disabled";
+};
+
+&mmc5 {
+ ti,bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 359c497..04cbbcb 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -272,5 +272,28 @@
ti,hwmods = "mmc5";
ti,needs-special-reset;
};
+
+ wdt2: wdt@4a314000 {
+ compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ ti,hwmods = "wd_timer2";
+ };
+
+ mcpdm: mcpdm@40132000 {
+ compatible = "ti,omap4-mcpdm";
+ reg = <0x40132000 0x7f>, /* MPU private access */
+ <0x49032000 0x7f>; /* L3 Interconnect */
+ interrupts = <0 112 0x4>;
+ interrupt-parent = <&gic>;
+ ti,hwmods = "mcpdm";
+ };
+
+ dmic: dmic@4012e000 {
+ compatible = "ti,omap4-dmic";
+ reg = <0x4012e000 0x7f>, /* MPU private access */
+ <0x4902e000 0x7f>; /* L3 Interconnect */
+ interrupts = <0 114 0x4>;
+ interrupt-parent = <&gic>;
+ ti,hwmods = "dmic";
+ };
};
};
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index c4ff6d1..802ec5b 100644
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -54,6 +54,17 @@
#address-cells = <1>;
#size-cells = <1>;
+ nxp,wdr-clks = <14>;
+ nxp,wwidth = <40000000>;
+ nxp,whold = <100000000>;
+ nxp,wsetup = <100000000>;
+ nxp,rdr-clks = <14>;
+ nxp,rwidth = <40000000>;
+ nxp,rhold = <66666666>;
+ nxp,rsetup = <100000000>;
+ nand-on-flash-bbt;
+ gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
mtd0@00000000 {
label = "phy3250-boot";
reg = <0x00000000 0x00064000>;
@@ -83,6 +94,14 @@
};
apb {
+ uart5: serial@40090000 {
+ status = "okay";
+ };
+
+ uart3: serial@40080000 {
+ status = "okay";
+ };
+
i2c1: i2c@400A0000 {
clock-frequency = <100000>;
@@ -114,16 +133,58 @@
};
ssp0: ssp@20084000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pl022,num-chipselects = <1>;
+ cs-gpios = <&gpio 3 5 0>;
+
eeprom: at25@0 {
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable = <0>;
+ pl022,com-mode = <0>;
+ pl022,rx-level-trig = <1>;
+ pl022,tx-level-trig = <1>;
+ pl022,ctrl-len = <11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+
+ at25,byte-len = <0x8000>;
+ at25,addr-mode = <2>;
+ at25,page-size = <64>;
+
compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
};
};
+
+ sd@20098000 {
+ wp-gpios = <&gpio 3 0 0>;
+ cd-gpios = <&gpio 3 1 0>;
+ cd-inverted;
+ bus-width = <4>;
+ status = "okay";
+ };
};
fab {
+ uart2: serial@40018000 {
+ status = "okay";
+ };
+
tsc@40048000 {
status = "okay";
};
+
+ key@40050000 {
+ status = "okay";
+ keypad,num-rows = <1>;
+ keypad,num-columns = <1>;
+ nxp,debounce-delay-ms = <3>;
+ nxp,scan-delay-ms = <34>;
+ linux,keymap = <0x00000002>;
+ };
};
};
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
similarity index 99%
rename from arch/arm/boot/dts/tegra-harmony.dts
rename to arch/arm/boot/dts/tegra20-harmony.dts
index 7de7013..f146dbf6 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -307,7 +307,6 @@
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
- support-8bit;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
similarity index 99%
rename from arch/arm/boot/dts/tegra-paz00.dts
rename to arch/arm/boot/dts/tegra20-paz00.dts
index bfeb117..684a9e1 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -301,7 +301,6 @@
sdhci@c8000600 {
status = "okay";
- support-8bit;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
similarity index 88%
rename from arch/arm/boot/dts/tegra-seaboard.dts
rename to arch/arm/boot/dts/tegra20-seaboard.dts
index 89cb7f2..85e621a 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -64,11 +64,6 @@
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
- ddc {
- nvidia,pins = "ddc", "owc", "spdi", "spdo",
- "uac";
- nvidia,function = "rsvd2";
- };
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
nvidia,function = "vi";
@@ -129,14 +124,14 @@
"lspi", "lvp1", "lvs";
nvidia,function = "displaya";
};
+ owc {
+ nvidia,pins = "owc", "spdi", "spdo", "uac";
+ nvidia,function = "rsvd2";
+ };
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
- pta {
- nvidia,pins = "pta";
- nvidia,function = "i2c2";
- };
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
@@ -176,7 +171,7 @@
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd",
"cdev1", "cdev2", "dap1", "dap2",
- "dap4", "dtf", "gma", "gmc", "gmd",
+ "dap4", "ddc", "dtf", "gma", "gmc", "gmd",
"gme", "gpu", "gpu7", "i2cp", "irrx",
"irtx", "pta", "rm", "sdc", "sdd",
"slxd", "slxk", "spdi", "spdo", "uac",
@@ -185,7 +180,7 @@
nvidia,tristate = <0>;
};
conf_ate {
- nvidia,pins = "ate", "csus", "dap3", "ddc",
+ nvidia,pins = "ate", "csus", "dap3",
"gpv", "owc", "slxc", "spib", "spid",
"spie";
nvidia,pull = <0>;
@@ -255,6 +250,39 @@
nvidia,slew-rate-falling = <3>;
};
};
+
+ state_i2cmux_ddc: pinmux_i2cmux_ddc {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
+
+ state_i2cmux_pta: pinmux_i2cmux_pta {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "i2c2";
+ };
+ };
+
+ state_i2cmux_idle: pinmux_i2cmux_idle {
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "rsvd4";
+ };
+ pta {
+ nvidia,pins = "pta";
+ nvidia,function = "rsvd4";
+ };
+ };
};
i2s@70002800 {
@@ -303,12 +331,37 @@
i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
+ };
- smart-battery@b {
- compatible = "ti,bq20z75", "smart-battery-1.1";
- reg = <0xb>;
- ti,i2c-retry-count = <2>;
- ti,poll-retry-count = <10>;
+ i2cmux {
+ compatible = "i2c-mux-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&{/i2c@7000c400}>;
+
+ pinctrl-names = "ddc", "pta", "idle";
+ pinctrl-0 = <&state_i2cmux_ddc>;
+ pinctrl-1 = <&state_i2cmux_pta>;
+ pinctrl-2 = <&state_i2cmux_idle>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smart-battery@b {
+ compatible = "ti,bq20z75", "smart-battery-1.1";
+ reg = <0xb>;
+ ti,i2c-retry-count = <2>;
+ ti,poll-retry-count = <10>;
+ };
};
};
@@ -334,7 +387,7 @@
};
};
- emc {
+ memory-controller@0x7000f400 {
emc-table@190000 {
reg = <190000>;
compatible = "nvidia,tegra20-emc-table";
@@ -397,7 +450,6 @@
sdhci@c8000600 {
status = "okay";
- support-8bit;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
similarity index 100%
rename from arch/arm/boot/dts/tegra-trimslice.dts
rename to arch/arm/boot/dts/tegra20-trimslice.dts
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
similarity index 99%
rename from arch/arm/boot/dts/tegra-ventana.dts
rename to arch/arm/boot/dts/tegra20-ventana.dts
index 445343b..be90544 100644
--- a/arch/arm/boot/dts/tegra-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -314,7 +314,6 @@
sdhci@c8000600 {
status = "okay";
- support-8bit;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
new file mode 100644
index 0000000..6916310
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -0,0 +1,301 @@
+/dts-v1/;
+
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "NVIDIA Tegra2 Whistler evaluation board";
+ compatible = "nvidia,whistler", "nvidia,tegra20";
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ ata {
+ nvidia,pins = "ata", "atb", "ate", "gma", "gmb",
+ "gmc", "gmd", "gpu";
+ nvidia,function = "gmi";
+ };
+ atc {
+ nvidia,pins = "atc", "atd";
+ nvidia,function = "sdio4";
+ };
+ cdev1 {
+ nvidia,pins = "cdev1";
+ nvidia,function = "plla_out";
+ };
+ cdev2 {
+ nvidia,pins = "cdev2";
+ nvidia,function = "osc";
+ };
+ crtp {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ };
+ csus {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ };
+ dap1 {
+ nvidia,pins = "dap1";
+ nvidia,function = "dap1";
+ };
+ dap2 {
+ nvidia,pins = "dap2";
+ nvidia,function = "dap2";
+ };
+ dap3 {
+ nvidia,pins = "dap3";
+ nvidia,function = "dap3";
+ };
+ dap4 {
+ nvidia,pins = "dap4";
+ nvidia,function = "dap4";
+ };
+ ddc {
+ nvidia,pins = "ddc";
+ nvidia,function = "i2c2";
+ };
+ dta {
+ nvidia,pins = "dta", "dtb", "dtc", "dtd";
+ nvidia,function = "vi";
+ };
+ dte {
+ nvidia,pins = "dte";
+ nvidia,function = "rsvd1";
+ };
+ dtf {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ };
+ gme {
+ nvidia,pins = "gme";
+ nvidia,function = "dap5";
+ };
+ gpu7 {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ };
+ gpv {
+ nvidia,pins = "gpv";
+ nvidia,function = "pcie";
+ };
+ hdint {
+ nvidia,pins = "hdint", "pta";
+ nvidia,function = "hdmi";
+ };
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ };
+ irrx {
+ nvidia,pins = "irrx", "irtx";
+ nvidia,function = "uartb";
+ };
+ kbca {
+ nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
+ nvidia,function = "kbc";
+ };
+ kbcb {
+ nvidia,pins = "kbcb", "kbcd";
+ nvidia,function = "sdio2";
+ };
+ lcsn {
+ nvidia,pins = "lcsn", "lsck", "lsda", "lsdi",
+ "spia", "spib", "spic";
+ nvidia,function = "spi3";
+ };
+ ld0 {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+ "ld5", "ld6", "ld7", "ld8", "ld9",
+ "ld10", "ld11", "ld12", "ld13", "ld14",
+ "ld15", "ld16", "ld17", "ldc", "ldi",
+ "lhp0", "lhp1", "lhp2", "lhs", "lm0",
+ "lm1", "lpp", "lpw0", "lpw1", "lpw2",
+ "lsc0", "lsc1", "lspi", "lvp0", "lvp1",
+ "lvs";
+ nvidia,function = "displaya";
+ };
+ owc {
+ nvidia,pins = "owc", "uac";
+ nvidia,function = "owr";
+ };
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
+ };
+ rm {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
+ };
+ sdb {
+ nvidia,pins = "sdb", "sdc", "sdd", "slxa",
+ "slxc", "slxd", "slxk";
+ nvidia,function = "sdio3";
+ };
+ sdio1 {
+ nvidia,pins = "sdio1";
+ nvidia,function = "sdio1";
+ };
+ spdi {
+ nvidia,pins = "spdi", "spdo";
+ nvidia,function = "rsvd2";
+ };
+ spid {
+ nvidia,pins = "spid", "spie", "spig", "spih";
+ nvidia,function = "spi2_alt";
+ };
+ spif {
+ nvidia,pins = "spif";
+ nvidia,function = "spi2";
+ };
+ uaa {
+ nvidia,pins = "uaa", "uab";
+ nvidia,function = "uarta";
+ };
+ uad {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ };
+ uca {
+ nvidia,pins = "uca", "ucb";
+ nvidia,function = "uartc";
+ };
+ uda {
+ nvidia,pins = "uda";
+ nvidia,function = "spi1";
+ };
+ conf_ata {
+ nvidia,pins = "ata", "atb", "atc", "ddc", "gma",
+ "gmb", "gmc", "gmd", "irrx", "irtx",
+ "kbca", "kbcb", "kbcc", "kbcd", "kbce",
+ "kbcf", "sdc", "sdd", "spie", "spig",
+ "spih", "uaa", "uab", "uad", "uca",
+ "ucb";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ conf_atd {
+ nvidia,pins = "atd", "ate", "cdev1", "csus",
+ "dap1", "dap2", "dap3", "dap4", "dte",
+ "dtf", "gpu", "gpu7", "gpv", "i2cp",
+ "rm", "sdio1", "slxa", "slxc", "slxd",
+ "slxk", "spdi", "spdo", "uac", "uda";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ conf_cdev2 {
+ nvidia,pins = "cdev2", "spia", "spib";
+ nvidia,pull = <1>;
+ nvidia,tristate = <1>;
+ };
+ conf_ck32 {
+ nvidia,pins = "ck32", "ddrc", "lc", "pmca",
+ "pmcb", "pmcc", "pmcd", "xm2c",
+ "xm2d";
+ nvidia,pull = <0>;
+ };
+ conf_crtp {
+ nvidia,pins = "crtp";
+ nvidia,pull = <0>;
+ nvidia,tristate = <1>;
+ };
+ conf_dta {
+ nvidia,pins = "dta", "dtb", "dtc", "dtd",
+ "spid", "spif";
+ nvidia,pull = <1>;
+ nvidia,tristate = <0>;
+ };
+ conf_gme {
+ nvidia,pins = "gme", "owc", "pta", "spic";
+ nvidia,pull = <2>;
+ nvidia,tristate = <1>;
+ };
+ conf_ld17_0 {
+ nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+ "ld23_22";
+ nvidia,pull = <1>;
+ };
+ conf_ls {
+ nvidia,pins = "ls", "pmce";
+ nvidia,pull = <2>;
+ };
+ drive_dap1 {
+ nvidia,pins = "drive_dap1";
+ nvidia,high-speed-mode = <0>;
+ nvidia,schmitt = <1>;
+ nvidia,low-power-mode = <0>;
+ nvidia,pull-down-strength = <0>;
+ nvidia,pull-up-strength = <0>;
+ nvidia,slew-rate-rising = <0>;
+ nvidia,slew-rate-falling = <0>;
+ };
+ };
+ };
+
+ i2s@70002800 {
+ status = "okay";
+ };
+
+ serial@70006000 {
+ status = "okay";
+ clock-frequency = <216000000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ codec: codec@1a {
+ compatible = "wlf,wm8753";
+ reg = <0x1a>;
+ };
+
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ usb@c5000000 {
+ status = "okay";
+ nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
+ };
+
+ usb@c5008000 {
+ status = "okay";
+ nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
+ };
+
+ sdhci@c8000400 {
+ status = "okay";
+ wp-gpios = <&gpio 173 0>; /* gpio PV5 */
+ bus-width = <8>;
+ };
+
+ sdhci@c8000600 {
+ status = "okay";
+ bus-width = <8>;
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8753-whistler",
+ "nvidia,tegra-audio-wm8753";
+ nvidia,model = "NVIDIA Tegra Whistler";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "LOUT1",
+ "Headphone Jack", "ROUT1",
+ "MIC2", "Mic Jack",
+ "MIC2N", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&codec>;
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index c417d67..59116b8 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -164,7 +164,7 @@
reg = <0x7000e400 0x400>;
};
- mc {
+ memory-controller@0x7000f000 {
compatible = "nvidia,tegra20-mc";
reg = <0x7000f000 0x024
0x7000f03c 0x3c4>;
@@ -177,7 +177,7 @@
0x58000000 0x02000000>; /* GART aperture */
};
- emc {
+ memory-controller@0x7000f400 {
compatible = "nvidia,tegra20-emc";
reg = <0x7000f400 0x200>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts
similarity index 99%
rename from arch/arm/boot/dts/tegra-cardhu.dts
rename to arch/arm/boot/dts/tegra30-cardhu.dts
index 36321bce..c169bce 100644
--- a/arch/arm/boot/dts/tegra-cardhu.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu.dts
@@ -144,7 +144,6 @@
sdhci@78000600 {
status = "okay";
- support-8bit;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 2dcc09e..1947939 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -167,7 +167,7 @@
reg = <0x7000e400 0x400>;
};
- mc {
+ memory-controller {
compatible = "nvidia,tegra30-mc";
reg = <0x7000f000 0x010
0x7000f03c 0x1b4
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index 4fa6054..eceed18 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -1,5 +1,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
@@ -16,8 +18,6 @@
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_LPC32XX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -52,13 +52,17 @@
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_MTD_NAND_SLC_LPC32XX=y
+CONFIG_MTD_NAND_MLC_LPC32XX=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
@@ -79,16 +83,22 @@
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_SMSC_PHY=y
# CONFIG_WLAN is not set
+CONFIG_INPUT_MATRIXKMAP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_LPC32XX=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_LPC32XX=y
+CONFIG_SERIO_LIBPS2=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_HS_LPC32XX=y
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
@@ -96,7 +106,8 @@
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
+CONFIG_SENSORS_DS620=y
+CONFIG_SENSORS_MAX6639=y
CONFIG_WATCHDOG=y
CONFIG_PNX4008_WATCHDOG=y
CONFIG_FB=y
@@ -133,6 +144,8 @@
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_PCA9532=y
+CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
@@ -146,10 +159,10 @@
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_LPC32XX=y
CONFIG_DMADEVICES=y
-CONFIG_AMBA_PL08X=y
CONFIG_STAGING=y
-CONFIG_IIO=y
CONFIG_LPC32XX_ADC=y
+CONFIG_MAX517=y
+CONFIG_IIO=y
CONFIG_EXT2_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
@@ -159,7 +172,6 @@
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 68374ba..c79f61f 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -243,7 +243,7 @@
#define ATOMIC64_INIT(i) { (i) }
-static inline u64 atomic64_read(atomic64_t *v)
+static inline u64 atomic64_read(const atomic64_t *v)
{
u64 result;
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index 3d22204..6ddbe44 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -60,13 +60,13 @@
#ifndef __ASSEMBLY__
#ifdef CONFIG_CPU_USE_DOMAINS
-#define set_domain(x) \
- do { \
- __asm__ __volatile__( \
- "mcr p15, 0, %0, c3, c0 @ set domain" \
- : : "r" (x)); \
- isb(); \
- } while (0)
+static inline void set_domain(unsigned val)
+{
+ asm volatile(
+ "mcr p15, 0, %0, c3, c0 @ set domain"
+ : : "r" (val));
+ isb();
+}
#define modify_domain(dom,type) \
do { \
@@ -78,8 +78,8 @@
} while (0)
#else
-#define set_domain(x) do { } while (0)
-#define modify_domain(dom,type) do { } while (0)
+static inline void set_domain(unsigned val) { }
+static inline void modify_domain(unsigned dom, unsigned type) { }
#endif
/*
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index b79f8e9..af7b0bd 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -148,7 +148,6 @@
#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_SYSCALL_TRACE 8
#define TIF_SYSCALL_AUDIT 9
-#define TIF_SYSCALL_RESTARTSYS 10
#define TIF_POLLING_NRFLAG 16
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
@@ -164,11 +163,9 @@
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
-#define _TIF_SYSCALL_RESTARTSYS (1 << TIF_SYSCALL_RESTARTSYS)
/* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
- _TIF_SYSCALL_RESTARTSYS)
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
/*
* Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index ba32b39..38c1a3b 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -187,8 +187,8 @@
TEST_BF_R ("mov pc, r",0,2f,"")
TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
TEST_BB( "sub pc, pc, #1b-2b+8")
-#if __LINUX_ARM_ARCH__ >= 6
- TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7)
+ TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */
#endif
TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 186c8cb..a02eada 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -503,7 +503,7 @@
event_requires_mode_exclusion(&event->attr)) {
pr_debug("ARM performance counters do not support "
"mode exclusion\n");
- return -EPERM;
+ return -EOPNOTSUPP;
}
/*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 5700a7a..14e3826 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -25,7 +25,6 @@
#include <linux/regset.h>
#include <linux/audit.h>
#include <linux/tracehook.h>
-#include <linux/unistd.h>
#include <asm/pgtable.h>
#include <asm/traps.h>
@@ -918,8 +917,6 @@
audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
- if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS))
- scno = __NR_restart_syscall - __NR_SYSCALL_BASE;
if (!test_thread_flag(TIF_SYSCALL_TRACE))
return scno;
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index fd2392a..536c5d6 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -27,6 +27,7 @@
*/
#define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
#define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
/*
* With EABI, the syscall number has to be loaded into r7.
@@ -47,6 +48,18 @@
};
/*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled. In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+ SWI_SYS_RESTART, /* swi __NR_restart_syscall */
+ 0xe49df004, /* ldr pc, [sp], #4 */
+};
+
+/*
* atomically swap in the new signal mask, and wait for a signal.
*/
asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
@@ -592,10 +605,12 @@
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
- case -ERESTART_RESTARTBLOCK:
regs->ARM_r0 = regs->ARM_ORIG_r0;
regs->ARM_pc = restart_addr;
break;
+ case -ERESTART_RESTARTBLOCK:
+ regs->ARM_r0 = -EINTR;
+ break;
}
}
@@ -611,14 +626,12 @@
* debugger has chosen to restart at a different PC.
*/
if (regs->ARM_pc == restart_addr) {
- if (retval == -ERESTARTNOHAND ||
- retval == -ERESTART_RESTARTBLOCK
+ if (retval == -ERESTARTNOHAND
|| (retval == -ERESTARTSYS
&& !(ka.sa.sa_flags & SA_RESTART))) {
regs->ARM_r0 = -EINTR;
regs->ARM_pc = continue_addr;
}
- clear_thread_flag(TIF_SYSCALL_RESTARTSYS);
}
handle_signal(signr, &ka, &info, regs);
@@ -632,8 +645,29 @@
* ignore the restart.
*/
if (retval == -ERESTART_RESTARTBLOCK
- && regs->ARM_pc == restart_addr)
- set_thread_flag(TIF_SYSCALL_RESTARTSYS);
+ && regs->ARM_pc == continue_addr) {
+ if (thumb_mode(regs)) {
+ regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
+ regs->ARM_pc -= 2;
+ } else {
+#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
+ regs->ARM_r7 = __NR_restart_syscall;
+ regs->ARM_pc -= 4;
+#else
+ u32 __user *usp;
+
+ regs->ARM_sp -= 4;
+ usp = (u32 __user *)regs->ARM_sp;
+
+ if (put_user(regs->ARM_pc, usp) == 0) {
+ regs->ARM_pc = KERN_RESTART_CODE;
+ } else {
+ regs->ARM_sp += 4;
+ force_sigsegv(0, current);
+ }
+#endif
+ }
+ }
}
restore_saved_sigmask();
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
index 5ff067b7..6fcfe83 100644
--- a/arch/arm/kernel/signal.h
+++ b/arch/arm/kernel/signal.h
@@ -8,5 +8,7 @@
* published by the Free Software Foundation.
*/
#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 4928d89..3647170 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -820,6 +820,8 @@
*/
memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
sigreturn_codes, sizeof(sigreturn_codes));
+ memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
+ syscall_restart_code, sizeof(syscall_restart_code));
flush_icache_range(vectors, vectors + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 43a31fb..36ff15b 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -183,7 +183,9 @@
}
#endif
+#ifdef CONFIG_SMP
PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 9e84fe4..30bb733 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -15,7 +15,9 @@
# Keep dtb files sorted alphabetically for each SoC
# sam9260
+dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
# sam9263
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index 226949d..f953bb5 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -50,5 +50,6 @@
#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index ad1165d..d52b0ef 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -78,6 +78,7 @@
/* North-South Bridge */
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000)
/* Cryptographic Engine */
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ebc4f30..5f87f2e 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -560,6 +560,14 @@
Include support for BUGBase 1.3 platform. This includes specific
configurations for the board and its peripherals.
+config MACH_IMX31_DT
+ bool "Support i.MX31 platforms from device tree"
+ select SOC_IMX31
+ select USE_OF
+ help
+ Include support for Freescale i.MX31 based platforms
+ using the device tree for discovery.
+
comment "MX35 platforms:"
config MACH_PCM043
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ff29421..07f7c22 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -57,6 +57,7 @@
obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
obj-$(CONFIG_MACH_BUG) += mach-bug.o
+obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o
# i.MX35 based machines
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index c9a06d8..f87a48f 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -20,6 +20,7 @@
#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <mach/mx31.h>
@@ -179,3 +180,21 @@
return 0;
}
+
+#ifdef CONFIG_OF
+int __init mx31_clocks_init_dt(void)
+{
+ struct device_node *np;
+ u32 fref = 26000000; /* default */
+
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+ continue;
+
+ if (!of_property_read_u32(np, "clock-frequency", &fref))
+ break;
+ }
+
+ return mx31_clocks_init(fref);
+}
+#endif
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 920a8cc..c6422fb 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -201,7 +201,6 @@
pr_err("i.MX35 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
-
clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
@@ -264,6 +263,14 @@
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ /*
+ * SCC is needed to boot via mmc after a watchdog reset. The clock code
+ * before conversion to common clk also enabled UART1 (which isn't
+ * handled here and not needed for mmc) and IIM (which is enabled
+ * unconditionally above).
+ */
+ clk_prepare_enable(clk[scc_gate]);
+
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
new file mode 100644
index 0000000..a68ba20
--- /dev/null
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx31.h>
+
+static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR,
+ "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR,
+ "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR,
+ "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR,
+ "imx21-uart.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR,
+ "imx21-uart.4", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx31_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx31_auxdata_lookup, NULL);
+}
+
+static void __init imx31_timer_init(void)
+{
+ mx31_clocks_init_dt();
+}
+
+static struct sys_timer imx31_timer = {
+ .init = imx31_timer_init,
+};
+
+static const char *imx31_dt_board_compat[] __initdata = {
+ "fsl,imx31",
+ NULL
+};
+
+DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
+ .map_io = mx31_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
+ .timer = &imx31_timer,
+ .init_machine = imx31_dt_init,
+ .dt_compat = imx31_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index f76edb9..ba09552 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -38,7 +38,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <asm/system.h>
+#include <asm/system_info.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
deleted file mode 100644
index e0b3eee..0000000
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ /dev/null
@@ -1,32 +0,0 @@
-if ARCH_LPC32XX
-
-menu "Individual UART enable selections"
-
-config ARCH_LPC32XX_UART3_SELECT
- bool "Add support for standard UART3"
- help
- Adds support for standard UART 3 when the 8250 serial support
- is enabled.
-
-config ARCH_LPC32XX_UART4_SELECT
- bool "Add support for standard UART4"
- help
- Adds support for standard UART 4 when the 8250 serial support
- is enabled.
-
-config ARCH_LPC32XX_UART5_SELECT
- bool "Add support for standard UART5"
- default y
- help
- Adds support for standard UART 5 when the 8250 serial support
- is enabled.
-
-config ARCH_LPC32XX_UART6_SELECT
- bool "Add support for standard UART6"
- help
- Adds support for standard UART 6 when the 8250 serial support
- is enabled.
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
index 2cfe0ee..697323b 100644
--- a/arch/arm/mach-lpc32xx/Makefile.boot
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -2,3 +2,4 @@
params_phys-y := 0x80000100
initrd_phys-y := 0x82000000
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index f6a3ffe..e8d315e 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -691,10 +691,21 @@
.parent = &clk_hclk,
.enable = local_onoff_enable,
.enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN,
+ .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN |
+ LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
.get_rate = local_return_parent_rate,
};
+static struct clk clk_nand_mlc = {
+ .parent = &clk_hclk,
+ .enable = local_onoff_enable,
+ .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL,
+ .enable_mask = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN |
+ LPC32XX_CLKPWR_NANDCLK_DMA_INT |
+ LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC,
+ .get_rate = local_return_parent_rate,
+};
+
static struct clk clk_i2s0 = {
.parent = &clk_hclk,
.enable = local_onoff_enable,
@@ -707,7 +718,8 @@
.parent = &clk_hclk,
.enable = local_onoff_enable,
.enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL,
- .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN,
+ .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN |
+ LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA,
.get_rate = local_return_parent_rate,
};
@@ -1120,8 +1132,9 @@
CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2),
CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0),
CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1),
- CLKDEV_INIT("lpc32xx_keys.0", NULL, &clk_kscan),
- CLKDEV_INIT("lpc32xx-nand.0", "nand_ck", &clk_nand),
+ CLKDEV_INIT("40050000.key", NULL, &clk_kscan),
+ CLKDEV_INIT("20020000.flash", NULL, &clk_nand),
+ CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc),
CLKDEV_INIT("40048000.adc", NULL, &clk_adc),
CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0),
CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1),
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
index 2ba6ca4..0052e7a 100644
--- a/arch/arm/mach-lpc32xx/include/mach/gpio.h
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -3,6 +3,4 @@
#include "gpio-lpc32xx.h"
-#define ARCH_NR_GPIOS (LPC32XX_GPO_P3_GRP + LPC32XX_GPO_P3_MAX)
-
#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 540106c..c1aabfc 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -30,12 +30,13 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/amba/mmci.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
-#include <linux/amba/pl08x.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -50,9 +51,12 @@
/*
* Mapped GPIOLIB GPIOs
*/
-#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
-#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
-#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
+#define SPI0_CS_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
+#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
+#define MMC_PWR_ENABLE_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5)
+#define MMC_CD_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 1)
+#define MMC_WP_GPIO LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 0)
/*
* AMBA LCD controller
@@ -158,24 +162,6 @@
/*
* AMBA SSP (SPI)
*/
-static void phy3250_spi_cs_set(u32 control)
-{
- gpio_set_value(SPI0_CS_GPIO, (int) control);
-}
-
-static struct pl022_config_chip spi0_chip_info = {
- .com_mode = INTERRUPT_TRANSFER,
- .iface = SSP_INTERFACE_MOTOROLA_SPI,
- .hierarchy = SSP_MASTER,
- .slave_tx_disable = 0,
- .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
- .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
- .ctrl_len = SSP_BITS_8,
- .wait_state = SSP_MWIRE_WAIT_ZERO,
- .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
- .cs_control = phy3250_spi_cs_set,
-};
-
static struct pl022_ssp_controller lpc32xx_ssp0_data = {
.bus_id = 0,
.num_chipselect = 1,
@@ -188,45 +174,57 @@
.enable_dma = 0,
};
-/* AT25 driver registration */
-static int __init phy3250_spi_board_register(void)
+static struct pl08x_channel_data pl08x_slave_channels[] = {
+ {
+ .bus_id = "nand-slc",
+ .min_signal = 1, /* SLC NAND Flash */
+ .max_signal = 1,
+ .periph_buses = PL08X_AHB1,
+ },
+ {
+ .bus_id = "nand-mlc",
+ .min_signal = 12, /* MLC NAND Flash */
+ .max_signal = 12,
+ .periph_buses = PL08X_AHB1,
+ },
+};
+
+/* NOTE: These will change, according to RMK */
+static int pl08x_get_signal(struct pl08x_dma_chan *ch)
{
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
- static struct spi_board_info info[] = {
- {
- .modalias = "spidev",
- .max_speed_hz = 5000000,
- .bus_num = 0,
- .chip_select = 0,
- .controller_data = &spi0_chip_info,
- },
- };
-
-#else
- static struct spi_eeprom eeprom = {
- .name = "at25256a",
- .byte_len = 0x8000,
- .page_size = 64,
- .flags = EE_ADDR2,
- };
-
- static struct spi_board_info info[] = {
- {
- .modalias = "at25",
- .max_speed_hz = 5000000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- .platform_data = &eeprom,
- .controller_data = &spi0_chip_info,
- },
- };
-#endif
- return spi_register_board_info(info, ARRAY_SIZE(info));
+ return ch->cd->min_signal;
}
-arch_initcall(phy3250_spi_board_register);
+
+static void pl08x_put_signal(struct pl08x_dma_chan *ch)
+{
+}
static struct pl08x_platform_data pl08x_pd = {
+ .slave_channels = &pl08x_slave_channels[0],
+ .num_slave_channels = ARRAY_SIZE(pl08x_slave_channels),
+ .get_signal = pl08x_get_signal,
+ .put_signal = pl08x_put_signal,
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+};
+
+static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios)
+{
+ /* Only on and off are supported */
+ if (ios->power_mode == MMC_POWER_OFF)
+ gpio_set_value(MMC_PWR_ENABLE_GPIO, 0);
+ else
+ gpio_set_value(MMC_PWR_ENABLE_GPIO, 1);
+ return 0;
+}
+
+static struct mmci_platform_data lpc32xx_mmci_data = {
+ .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 |
+ MMC_VDD_32_33 | MMC_VDD_33_34,
+ .ios_handler = mmc_handle_ios,
+ .dma_filter = NULL,
+ /* No DMA for now since AMBA PL080 dmaengine driver only does scatter
+ * gather, and the MMCI driver doesn't do it this way */
};
static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
@@ -234,6 +232,8 @@
OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
+ OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
+ &lpc32xx_mmci_data),
{ }
};
@@ -241,10 +241,6 @@
{
u32 tmp;
- /* Setup SLC NAND controller muxing */
- __raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
- LPC32XX_CLKPWR_NAND_CLK_CTRL);
-
/* Setup LCD muxing to RGB565 */
tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
@@ -264,34 +260,12 @@
LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE;
__raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
- /* Disable IrDA pulsing support on UART6 */
- tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
- tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
- __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
-
- /* Enable DMA for I2S1 channel */
- tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL);
- tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA;
- __raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL);
-
lpc32xx_serial_init();
- /*
- * AMBA peripheral clocks need to be enabled prior to AMBA device
- * detection or a data fault will occur, so enable the clocks
- * here.
- */
- tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
- __raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
- LPC32XX_CLKPWR_LCDCLK_CTRL);
-
- tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
- __raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
- LPC32XX_CLKPWR_SSP_CLK_CTRL);
-
- tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL);
- __raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN),
- LPC32XX_CLKPWR_DMA_CLK_CTRL);
+ tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+ tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
+ LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN;
+ __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
/* Test clock needed for UDA1380 initial init */
__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
@@ -302,12 +276,10 @@
lpc32xx_auxdata_lookup, NULL);
/* Register GPIOs used on this board */
- if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
- printk(KERN_ERR "Error requesting gpio %u",
- SPI0_CS_GPIO);
- else if (gpio_direction_output(SPI0_CS_GPIO, 1))
- printk(KERN_ERR "Error setting gpio %u to output",
- SPI0_CS_GPIO);
+ if (gpio_request(MMC_PWR_ENABLE_GPIO, "mmc_power_en"))
+ pr_err("Error requesting gpio %u", MMC_PWR_ENABLE_GPIO);
+ else if (gpio_direction_output(MMC_PWR_ENABLE_GPIO, 1))
+ pr_err("Error setting gpio %u to output", MMC_PWR_ENABLE_GPIO);
}
static char const *lpc32xx_dt_compat[] __initdata = {
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index f273528..05621a2 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -31,59 +31,6 @@
#define LPC32XX_SUART_FIFO_SIZE 64
-/* Standard 8250/16550 compatible serial ports */
-static struct plat_serial8250_port serial_std_platform_data[] = {
-#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
- {
- .membase = io_p2v(LPC32XX_UART5_BASE),
- .mapbase = LPC32XX_UART5_BASE,
- .irq = IRQ_LPC32XX_UART_IIR5,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
- {
- .membase = io_p2v(LPC32XX_UART3_BASE),
- .mapbase = LPC32XX_UART3_BASE,
- .irq = IRQ_LPC32XX_UART_IIR3,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
- {
- .membase = io_p2v(LPC32XX_UART4_BASE),
- .mapbase = LPC32XX_UART4_BASE,
- .irq = IRQ_LPC32XX_UART_IIR4,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
- {
- .membase = io_p2v(LPC32XX_UART6_BASE),
- .mapbase = LPC32XX_UART6_BASE,
- .irq = IRQ_LPC32XX_UART_IIR6,
- .uartclk = LPC32XX_MAIN_OSC_FREQ,
- .regshift = 2,
- .iotype = UPIO_MEM32,
- .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
- UPF_SKIP_TEST,
- },
-#endif
- { },
-};
-
struct uartinit {
char *uart_ck_name;
u32 ck_mode_mask;
@@ -92,7 +39,6 @@
};
static struct uartinit uartinit_data[] __initdata = {
-#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
{
.uart_ck_name = "uart5_ck",
.ck_mode_mask =
@@ -100,8 +46,6 @@
.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
.mapbase = LPC32XX_UART5_BASE,
},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
{
.uart_ck_name = "uart3_ck",
.ck_mode_mask =
@@ -109,8 +53,6 @@
.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
.mapbase = LPC32XX_UART3_BASE,
},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
{
.uart_ck_name = "uart4_ck",
.ck_mode_mask =
@@ -118,8 +60,6 @@
.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
.mapbase = LPC32XX_UART4_BASE,
},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
{
.uart_ck_name = "uart6_ck",
.ck_mode_mask =
@@ -127,19 +67,6 @@
.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
.mapbase = LPC32XX_UART6_BASE,
},
-#endif
-};
-
-static struct platform_device serial_std_platform_device = {
- .name = "serial8250",
- .id = 0,
- .dev = {
- .platform_data = serial_std_platform_data,
- },
-};
-
-static struct platform_device *lpc32xx_serial_devs[] __initdata = {
- &serial_std_platform_device,
};
void __init lpc32xx_serial_init(void)
@@ -156,15 +83,8 @@
clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
if (!IS_ERR(clk)) {
clk_enable(clk);
- serial_std_platform_data[i].uartclk =
- clk_get_rate(clk);
}
- /* Fall back on main osc rate if clock rate return fails */
- if (serial_std_platform_data[i].uartclk == 0)
- serial_std_platform_data[i].uartclk =
- LPC32XX_MAIN_OSC_FREQ;
-
/* Setup UART clock modes for all UARTs, disable autoclock */
clkmodes |= uartinit_data[i].ck_mode_mask;
@@ -189,7 +109,7 @@
__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
/* Force a flush of the RX FIFOs to work around a HW bug */
- puart = serial_std_platform_data[i].mapbase;
+ puart = uartinit_data[i].mapbase;
__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
j = LPC32XX_SUART_FIFO_SIZE;
@@ -198,11 +118,13 @@
__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
}
+ /* Disable IrDA pulsing support on UART6 */
+ tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+ tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
+ __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
/* Disable UART5->USB transparent mode or USB won't work */
tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
-
- platform_add_devices(lpc32xx_serial_devs,
- ARRAY_SIZE(lpc32xx_serial_devs));
}
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
deleted file mode 100644
index 0e135a5..0000000
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_GPIO_PXA_H
-#define __ASM_MACH_GPIO_PXA_H
-
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
-#include <plat/gpio-pxa.h>
-
-#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
index c64dbb9..eb187e0 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -31,5 +31,6 @@
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 3674497..e807c4c 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -42,6 +42,7 @@
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
+#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000
#define MV78XX0_CORE_REGS_SIZE SZ_16K
#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
@@ -59,6 +60,7 @@
* Core-specific peripheral registers.
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
+#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE)
/*
* Register Map
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 91cf062..ccdf83b 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -16,6 +16,7 @@
bool
select ARM_AMBA
select CPU_ARM926T
+ select HAVE_CAN_FLEXCAN if CAN
select HAVE_PWM
select PINCTRL_IMX28
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index 9acdd63..9ee5ced 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -10,7 +10,7 @@
*/
#include <mach/mx23.h>
#include <mach/devices-common.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
#include <linux/amba/bus.h>
static inline int mx23_add_duart(void)
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 84b2960d..fcab431 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -10,7 +10,7 @@
*/
#include <mach/mx28.h>
#include <mach/devices-common.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
#include <linux/amba/bus.h>
static inline int mx28_add_duart(void)
diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c
index 5a75b71..76b53f73 100644
--- a/arch/arm/mach-mxs/devices/platform-mxsfb.c
+++ b/arch/arm/mach-mxs/devices/platform-mxsfb.c
@@ -10,7 +10,7 @@
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
#ifdef CONFIG_SOC_IMX23
struct platform_device *__init mx23_add_mxsfb(
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
index 5e90b9d..f5f0617 100644
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@@ -205,6 +205,16 @@
return 0;
}
+static void __init apx4devkit_fec_phy_clk_enable(void)
+{
+ struct clk *clk;
+
+ /* Enable fec phy clock */
+ clk = clk_get_sys("enet_out", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+}
+
static void __init apx4devkit_init(void)
{
mx28_soc_init();
@@ -225,6 +235,7 @@
phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
apx4devkit_phy_fixup);
+ apx4devkit_fec_phy_clk_enable();
mx28_add_fec(0, &mx28_fec_pdata);
mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 8cac94b..7bbb961 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -16,12 +16,57 @@
#include <linux/init.h>
#include <linux/init.h>
#include <linux/irqdomain.h>
+#include <linux/mxsfb.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
+static struct fb_videomode mx23evk_video_modes[] = {
+ {
+ .name = "Samsung-LMS430HF02",
+ .refresh = 60,
+ .xres = 480,
+ .yres = 272,
+ .pixclock = 108096, /* picosecond (9.2 MHz) */
+ .left_margin = 15,
+ .right_margin = 8,
+ .upper_margin = 12,
+ .lower_margin = 4,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
+ FB_SYNC_DOTCLK_FAILING_ACT,
+ },
+};
+
+static struct fb_videomode mx28evk_video_modes[] = {
+ {
+ .name = "Seiko-43WVF1G",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 29851, /* picosecond (33.5 MHz) */
+ .left_margin = 89,
+ .right_margin = 164,
+ .upper_margin = 23,
+ .lower_margin = 10,
+ .hsync_len = 10,
+ .vsync_len = 10,
+ .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
+ FB_SYNC_DOTCLK_FAILING_ACT,
+ },
+};
+
+static struct mxsfb_platform_data mxsfb_pdata __initdata;
+
+static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+ OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+ { /* sentinel */ }
+};
+
static int __init mxs_icoll_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
@@ -71,6 +116,76 @@
.init = imx28_timer_init,
};
+enum mac_oui {
+ OUI_FSL,
+ OUI_DENX,
+};
+
+static void __init update_fec_mac_prop(enum mac_oui oui)
+{
+ struct device_node *np, *from = NULL;
+ struct property *oldmac, *newmac;
+ const u32 *ocotp = mxs_get_ocotp();
+ u8 *macaddr;
+ u32 val;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ np = of_find_compatible_node(from, NULL, "fsl,imx28-fec");
+ if (!np)
+ return;
+ from = np;
+
+ newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
+ if (!newmac)
+ return;
+ newmac->value = newmac + 1;
+ newmac->length = 6;
+
+ newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+ if (!newmac->name) {
+ kfree(newmac);
+ return;
+ }
+
+ /*
+ * OCOTP only stores the last 4 octets for each mac address,
+ * so hard-code OUI here.
+ */
+ macaddr = newmac->value;
+ switch (oui) {
+ case OUI_FSL:
+ macaddr[0] = 0x00;
+ macaddr[1] = 0x04;
+ macaddr[2] = 0x9f;
+ break;
+ case OUI_DENX:
+ macaddr[0] = 0xc0;
+ macaddr[1] = 0xe5;
+ macaddr[2] = 0x4e;
+ break;
+ }
+ val = ocotp[i];
+ macaddr[3] = (val >> 16) & 0xff;
+ macaddr[4] = (val >> 8) & 0xff;
+ macaddr[5] = (val >> 0) & 0xff;
+
+ oldmac = of_find_property(np, newmac->name, NULL);
+ if (oldmac)
+ prom_update_property(np, newmac, oldmac);
+ else
+ prom_add_property(np, newmac);
+ }
+}
+
+static void __init imx23_evk_init(void)
+{
+ mxsfb_pdata.mode_list = mx23evk_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
+ mxsfb_pdata.default_bpp = 32;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+}
+
static void __init imx28_evk_init(void)
{
struct clk *clk;
@@ -79,24 +194,35 @@
clk = clk_get_sys("enet_out", NULL);
if (!IS_ERR(clk))
clk_prepare_enable(clk);
+
+ update_fec_mac_prop(OUI_FSL);
+
+ mxsfb_pdata.mode_list = mx28evk_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
+ mxsfb_pdata.default_bpp = 32;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
}
static void __init mxs_machine_init(void)
{
if (of_machine_is_compatible("fsl,imx28-evk"))
imx28_evk_init();
+ else if (of_machine_is_compatible("fsl,imx23-evk"))
+ imx23_evk_init();
of_platform_populate(NULL, of_default_bus_match_table,
- NULL, NULL);
+ mxs_auxdata_lookup, NULL);
}
static const char *imx23_dt_compat[] __initdata = {
"fsl,imx23-evk",
+ "olimex,imx23-olinuxino",
"fsl,imx23",
NULL,
};
static const char *imx28_dt_compat[] __initdata = {
+ "crystalfontz,cfa10036",
"fsl,imx28-evk",
"fsl,imx28",
NULL,
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index a6bbd1a..a42c9a3 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,8 +7,6 @@
# Object file lists.
-obj-y += clock.o
-
# Cpu revision
obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 2e8d3e1..f4535a7 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -14,12 +14,14 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
+#include <linux/amba/mmci.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
+#include <linux/i2c.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <asm/sizes.h>
@@ -185,17 +187,29 @@
#endif
}
-static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
- { IRQ_UART0 }, NULL);
-
-static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
- { IRQ_UART1 }, NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
- &uart0_device,
- &uart1_device,
+static struct mmci_platform_data mmcsd_plat_data = {
+ .ocr_mask = MMC_VDD_29_30,
+ .f_max = 48000000,
+ .gpio_wp = -1,
+ .gpio_cd = 111,
+ .cd_invert = true,
+ .capabilities = MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA,
};
+static int __init nhk8815_mmcsd_init(void)
+{
+ int ret;
+
+ ret = gpio_request(112, "card detect bias");
+ if (ret)
+ return ret;
+ gpio_direction_output(112, 0);
+ amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180);
+ return 0;
+}
+module_init(nhk8815_mmcsd_init);
+
static struct resource nhk8815_eth_resources[] = {
{
.name = "smc91x-regs",
@@ -253,17 +267,46 @@
.init = nomadik_timer_init,
};
+static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("stw4811", 0x2d),
+ },
+};
+
+static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = {
+ {
+ I2C_BOARD_INFO("camera", 0x10),
+ },
+ {
+ I2C_BOARD_INFO("stw5095", 0x1a),
+ },
+ {
+ I2C_BOARD_INFO("lis3lv02dl", 0x1d),
+ },
+};
+
+static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = {
+ {
+ I2C_BOARD_INFO("stw4811-usb", 0x2d),
+ },
+};
+
static void __init nhk8815_platform_init(void)
{
- int i;
-
cpu8815_platform_init();
nhk8815_onenand_init();
platform_add_devices(nhk8815_platform_devices,
ARRAY_SIZE(nhk8815_platform_devices));
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
+ amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0);
+ amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0);
+
+ i2c_register_board_info(0, nhk8815_i2c0_devices,
+ ARRAY_SIZE(nhk8815_i2c0_devices));
+ i2c_register_board_info(1, nhk8815_i2c1_devices,
+ ARRAY_SIZE(nhk8815_i2c1_devices));
+ i2c_register_board_info(2, nhk8815_i2c2_devices,
+ ARRAY_SIZE(nhk8815_i2c2_devices));
}
MACHINE_START(NOMADIK, "NHK8815")
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
deleted file mode 100644
index 48a59f2..0000000
--- a/arch/arm/mach-nomadik/clock.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/arch/arm/mach-nomadik/clock.c
- *
- * Copyright (C) 2009 Alessandro Rubini
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-
-/*
- * The nomadik board uses generic clocks, but the serial pl011 file
- * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* enable and disable do nothing */
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-static struct clk clk_24 = {
- .rate = 2400000,
-};
-
-static struct clk clk_48 = {
- .rate = 48 * 1000 * 1000,
-};
-
-/*
- * Catch-all default clock to satisfy drivers using the clk API. We don't
- * model the actual hardware clocks yet.
- */
-static struct clk clk_default;
-
-#define CLK(_clk, dev) \
- { \
- .clk = _clk, \
- .dev_id = dev, \
- }
-
-static struct clk_lookup lookups[] = {
- {
- .con_id = "apb_pclk",
- .clk = &clk_default,
- },
- CLK(&clk_24, "mtu0"),
- CLK(&clk_24, "mtu1"),
- CLK(&clk_48, "uart0"),
- CLK(&clk_48, "uart1"),
- CLK(&clk_default, "gpio.0"),
- CLK(&clk_default, "gpio.1"),
- CLK(&clk_default, "gpio.2"),
- CLK(&clk_default, "gpio.3"),
- CLK(&clk_default, "rng"),
-};
-
-int __init clk_init(void)
-{
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
- return 0;
-}
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
deleted file mode 100644
index 78da2e7c..0000000
--- a/arch/arm/mach-nomadik/clock.h
+++ /dev/null
@@ -1,15 +0,0 @@
-
-/*
- * linux/arch/arm/mach-nomadik/clock.h
- *
- * Copyright (C) 2009 Alessandro Rubini
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct clk {
- unsigned long rate;
-};
-
-int __init clk_init(void);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 27f43a4..6fd8e46 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -22,6 +22,10 @@
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_data/clk-nomadik.h>
#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
@@ -32,91 +36,63 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
-#include "clock.h"
#include "cpu-8815.h"
-#define __MEM_4K_RESOURCE(x) \
- .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
-
/* The 8815 has 4 GPIO blocks, let's register them immediately */
+static resource_size_t __initdata cpu8815_gpio_base[] = {
+ NOMADIK_GPIO0_BASE,
+ NOMADIK_GPIO1_BASE,
+ NOMADIK_GPIO2_BASE,
+ NOMADIK_GPIO3_BASE,
+};
-#define GPIO_RESOURCE(block) \
- { \
- .start = NOMADIK_GPIO##block##_BASE, \
- .end = NOMADIK_GPIO##block##_BASE + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- { \
- .start = IRQ_GPIO##block, \
- .end = IRQ_GPIO##block, \
- .flags = IORESOURCE_IRQ, \
+static struct platform_device *
+cpu8815_add_gpio(int id, resource_size_t addr, int irq,
+ struct nmk_gpio_platform_data *pdata)
+{
+ struct resource resources[] = {
+ {
+ .start = addr,
+ .end = addr + 127,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+
+ return platform_device_register_resndata(NULL, "gpio", id,
+ resources, ARRAY_SIZE(resources),
+ pdata, sizeof(*pdata));
+}
+
+void cpu8815_add_gpios(resource_size_t *base, int num, int irq,
+ struct nmk_gpio_platform_data *pdata)
+{
+ int first = 0;
+ int i;
+
+ for (i = 0; i < num; i++, first += 32, irq++) {
+ pdata->first_gpio = first;
+ pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
+ pdata->num_gpio = 32;
+
+ cpu8815_add_gpio(i, base[i], irq, pdata);
}
-
-#define GPIO_DEVICE(block) \
- { \
- .name = "gpio", \
- .id = block, \
- .num_resources = 2, \
- .resource = &cpu8815_gpio_resources[block * 2], \
- .dev = { \
- .platform_data = &cpu8815_gpio[block], \
- }, \
- }
-
-static struct nmk_gpio_platform_data cpu8815_gpio[] = {
- {
- .name = "GPIO-0-31",
- .first_gpio = 0,
- .first_irq = NOMADIK_GPIO_TO_IRQ(0),
- }, {
- .name = "GPIO-32-63",
- .first_gpio = 32,
- .first_irq = NOMADIK_GPIO_TO_IRQ(32),
- }, {
- .name = "GPIO-64-95",
- .first_gpio = 64,
- .first_irq = NOMADIK_GPIO_TO_IRQ(64),
- }, {
- .name = "GPIO-96-127", /* 124..127 not routed to pin */
- .first_gpio = 96,
- .first_irq = NOMADIK_GPIO_TO_IRQ(96),
- }
-};
-
-static struct resource cpu8815_gpio_resources[] = {
- GPIO_RESOURCE(0),
- GPIO_RESOURCE(1),
- GPIO_RESOURCE(2),
- GPIO_RESOURCE(3),
-};
-
-static struct platform_device cpu8815_platform_gpio[] = {
- GPIO_DEVICE(0),
- GPIO_DEVICE(1),
- GPIO_DEVICE(2),
- GPIO_DEVICE(3),
-};
-
-static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
-
-static struct platform_device *platform_devs[] __initdata = {
- cpu8815_platform_gpio + 0,
- cpu8815_platform_gpio + 1,
- cpu8815_platform_gpio + 2,
- cpu8815_platform_gpio + 3,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
- &cpu8815_amba_rng_device
-};
+}
static int __init cpu8815_init(void)
{
- int i;
+ struct nmk_gpio_platform_data pdata = {
+ /* No custom data yet */
+ };
- platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
- for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
- amba_device_register(amba_devs[i], &iomem_resource);
+ cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base),
+ IRQ_GPIO0, &pdata);
+ amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
+ amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
return 0;
}
arch_initcall(cpu8815_init);
@@ -147,7 +123,7 @@
* Init clocks here so that they are available for system timer
* initialization.
*/
- clk_init();
+ nomadik_clk_init();
}
/*
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index 0fc2f6f..6d14454 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -5,6 +5,7 @@
#include <linux/i2c-gpio.h>
#include <linux/platform_device.h>
#include <plat/gpio-nomadik.h>
+#include <plat/pincfg.h>
/*
* There are two busses in the 8815NHK.
@@ -12,19 +13,27 @@
* use bit-bang through GPIO by now, to keep things simple
*/
+/* I2C0 connected to the STw4811 power management chip */
static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
/* keep defaults for timeouts; pins are push-pull bidirectional */
.scl_pin = 62,
.sda_pin = 63,
};
+/* I2C1 connected to various sensors */
static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
/* keep defaults for timeouts; pins are push-pull bidirectional */
.scl_pin = 53,
.sda_pin = 54,
};
-/* first bus: GPIO XX and YY */
+/* I2C2 connected to the USB portions of the STw4811 only */
+static struct i2c_gpio_platform_data nhk8815_i2c_data2 = {
+ /* keep defaults for timeouts; pins are push-pull bidirectional */
+ .scl_pin = 73,
+ .sda_pin = 74,
+};
+
static struct platform_device nhk8815_i2c_dev0 = {
.name = "i2c-gpio",
.id = 0,
@@ -32,7 +41,7 @@
.platform_data = &nhk8815_i2c_data0,
},
};
-/* second bus: GPIO XX and YY */
+
static struct platform_device nhk8815_i2c_dev1 = {
.name = "i2c-gpio",
.id = 1,
@@ -41,15 +50,29 @@
},
};
+static struct platform_device nhk8815_i2c_dev2 = {
+ .name = "i2c-gpio",
+ .id = 2,
+ .dev = {
+ .platform_data = &nhk8815_i2c_data2,
+ },
+};
+
+static pin_cfg_t cpu8815_pins_i2c[] = {
+ PIN_CFG_INPUT(62, GPIO, PULLUP),
+ PIN_CFG_INPUT(63, GPIO, PULLUP),
+ PIN_CFG_INPUT(53, GPIO, PULLUP),
+ PIN_CFG_INPUT(54, GPIO, PULLUP),
+ PIN_CFG_INPUT(73, GPIO, PULLUP),
+ PIN_CFG_INPUT(74, GPIO, PULLUP),
+};
+
static int __init nhk8815_i2c_init(void)
{
- nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
- nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
+ nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c));
platform_device_register(&nhk8815_i2c_dev0);
-
- nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
- nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
platform_device_register(&nhk8815_i2c_dev1);
+ platform_device_register(&nhk8815_i2c_dev2);
return 0;
}
@@ -58,6 +81,7 @@
{
platform_device_unregister(&nhk8815_i2c_dev0);
platform_device_unregister(&nhk8815_i2c_dev1);
+ platform_device_unregister(&nhk8815_i2c_dev2);
return;
}
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index 8faabc5..a118e615 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -22,56 +22,56 @@
#include <mach/hardware.h>
-#define IRQ_VIC_START 0 /* first VIC interrupt is 0 */
+#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */
/*
* Interrupt numbers generic for all Nomadik Chip cuts
*/
-#define IRQ_WATCHDOG 0
-#define IRQ_SOFTINT 1
-#define IRQ_CRYPTO 2
-#define IRQ_OWM 3
-#define IRQ_MTU0 4
-#define IRQ_MTU1 5
-#define IRQ_GPIO0 6
-#define IRQ_GPIO1 7
-#define IRQ_GPIO2 8
-#define IRQ_GPIO3 9
-#define IRQ_RTC_RTT 10
-#define IRQ_SSP 11
-#define IRQ_UART0 12
-#define IRQ_DMA1 13
-#define IRQ_CLCD_MDIF 14
-#define IRQ_DMA0 15
-#define IRQ_PWRFAIL 16
-#define IRQ_UART1 17
-#define IRQ_FIRDA 18
-#define IRQ_MSP0 19
-#define IRQ_I2C0 20
-#define IRQ_I2C1 21
-#define IRQ_SDMMC 22
-#define IRQ_USBOTG 23
-#define IRQ_SVA_IT0 24
-#define IRQ_SVA_IT1 25
-#define IRQ_SAA_IT0 26
-#define IRQ_SAA_IT1 27
-#define IRQ_UART2 28
-#define IRQ_MSP2 31
-#define IRQ_L2CC 48
-#define IRQ_HPI 49
-#define IRQ_SKE 50
-#define IRQ_KP 51
-#define IRQ_MEMST 54
-#define IRQ_SGA_IT 58
-#define IRQ_USBM 60
-#define IRQ_MSP1 62
+#define IRQ_WATCHDOG 1
+#define IRQ_SOFTINT 2
+#define IRQ_CRYPTO 3
+#define IRQ_OWM 4
+#define IRQ_MTU0 5
+#define IRQ_MTU1 6
+#define IRQ_GPIO0 7
+#define IRQ_GPIO1 8
+#define IRQ_GPIO2 9
+#define IRQ_GPIO3 10
+#define IRQ_RTC_RTT 11
+#define IRQ_SSP 12
+#define IRQ_UART0 13
+#define IRQ_DMA1 14
+#define IRQ_CLCD_MDIF 15
+#define IRQ_DMA0 16
+#define IRQ_PWRFAIL 17
+#define IRQ_UART1 18
+#define IRQ_FIRDA 19
+#define IRQ_MSP0 20
+#define IRQ_I2C0 21
+#define IRQ_I2C1 22
+#define IRQ_SDMMC 23
+#define IRQ_USBOTG 24
+#define IRQ_SVA_IT0 25
+#define IRQ_SVA_IT1 26
+#define IRQ_SAA_IT0 27
+#define IRQ_SAA_IT1 28
+#define IRQ_UART2 29
+#define IRQ_MSP2 30
+#define IRQ_L2CC 49
+#define IRQ_HPI 50
+#define IRQ_SKE 51
+#define IRQ_KP 52
+#define IRQ_MEMST 55
+#define IRQ_SGA_IT 59
+#define IRQ_USBM 61
+#define IRQ_MSP1 63
-#define NOMADIK_SOC_NR_IRQS 64
+#define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64)
/* After chip-specific IRQ numbers we have the GPIO ones */
#define NOMADIK_NR_GPIO 128 /* last 4 not wired to pins */
-#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_SOC_NR_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_SOC_NR_IRQS)
+#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + NOMADIK_GPIO_OFFSET)
+#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - NOMADIK_GPIO_OFFSET)
#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
/* Following two are used by entry_macro.S, to access our dual-vic */
@@ -79,4 +79,3 @@
#define VIC_REG_IRQSR1 0x20
#endif /* __ASM_ARCH_IRQS_H */
-
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 8fa2fc3..779734d 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -494,8 +494,8 @@
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_hsmmc_init(mmc);
overo_i2c_init();
+ omap_hsmmc_init(mmc);
omap_display_init(&overo_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 7b4b932..527c004 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -772,7 +772,7 @@
char *oh_name = "wd_timer2";
char *dev_name = "omap_wdt";
- if (!cpu_class_is_omap2())
+ if (!cpu_class_is_omap2() || of_have_populated_dt())
return 0;
oh = omap_hwmod_lookup(oh_name);
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index f30e861..b7bcba5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1928,7 +1928,7 @@
static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
@@ -1963,7 +1963,7 @@
static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
@@ -1998,7 +1998,7 @@
static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
@@ -2033,7 +2033,7 @@
static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
- { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
+ { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" },
};
static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
@@ -3864,7 +3864,7 @@
};
/* usb_host_fs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = {
.master = &omap44xx_usb_host_fs_hwmod,
.slave = &omap44xx_l3_main_2_hwmod,
.clk = "l3_div_ck",
@@ -3922,7 +3922,7 @@
};
/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = {
.master = &omap44xx_aess_hwmod,
.slave = &omap44xx_l4_abe_hwmod,
.clk = "ocp_abe_iclk",
@@ -4013,7 +4013,7 @@
};
/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
@@ -4031,7 +4031,7 @@
};
/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = {
.master = &omap44xx_l4_abe_hwmod,
.slave = &omap44xx_aess_hwmod,
.clk = "ocp_abe_iclk",
@@ -5857,7 +5857,7 @@
};
/* l4_cfg -> usb_host_fs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_usb_host_fs_hwmod,
.clk = "l4_div_ck",
@@ -6014,13 +6014,13 @@
&omap44xx_iva__l3_main_2,
&omap44xx_l3_main_1__l3_main_2,
&omap44xx_l4_cfg__l3_main_2,
- &omap44xx_usb_host_fs__l3_main_2,
+ /* &omap44xx_usb_host_fs__l3_main_2, */
&omap44xx_usb_host_hs__l3_main_2,
&omap44xx_usb_otg_hs__l3_main_2,
&omap44xx_l3_main_1__l3_main_3,
&omap44xx_l3_main_2__l3_main_3,
&omap44xx_l4_cfg__l3_main_3,
- &omap44xx_aess__l4_abe,
+ /* &omap44xx_aess__l4_abe, */
&omap44xx_dsp__l4_abe,
&omap44xx_l3_main_1__l4_abe,
&omap44xx_mpu__l4_abe,
@@ -6029,8 +6029,8 @@
&omap44xx_l4_cfg__l4_wkup,
&omap44xx_mpu__mpu_private,
&omap44xx_l4_cfg__ocp_wp_noc,
- &omap44xx_l4_abe__aess,
- &omap44xx_l4_abe__aess_dma,
+ /* &omap44xx_l4_abe__aess, */
+ /* &omap44xx_l4_abe__aess_dma, */
&omap44xx_l3_main_2__c2c,
&omap44xx_l4_wkup__counter_32k,
&omap44xx_l4_cfg__ctrl_module_core,
@@ -6136,7 +6136,7 @@
&omap44xx_l4_per__uart2,
&omap44xx_l4_per__uart3,
&omap44xx_l4_per__uart4,
- &omap44xx_l4_cfg__usb_host_fs,
+ /* &omap44xx_l4_cfg__usb_host_fs, */
&omap44xx_l4_cfg__usb_host_hs,
&omap44xx_l4_cfg__usb_otg_hs,
&omap44xx_l4_cfg__usb_tll_hs,
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 119d5a9..43a9790 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -32,6 +32,7 @@
#include "twl-common.h"
#include "pm.h"
#include "voltage.h"
+#include "mux.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
@@ -77,6 +78,7 @@
struct twl6040_platform_data *twl6040_data, int twl6040_irq)
{
/* PMIC part*/
+ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index d09da6a..d3de84b 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -127,7 +127,11 @@
GPIO19_SSP2_SCLK,
GPIO86_SSP2_RXD,
GPIO87_SSP2_TXD,
- GPIO88_GPIO,
+ GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */
+
+ /* BQ24022 Regulator */
+ GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */
+ GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */
/* HX4700 specific input GPIOs */
GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */
@@ -135,6 +139,10 @@
GPIO14_GPIO, /* nWLAN_IRQ */
/* HX4700 specific output GPIOs */
+ GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */
+ GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */
+ GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */
GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */
GPIO10_GPIO, /* GSM_IRQ */
@@ -872,14 +880,19 @@
{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
{ GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" },
+ { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
{ GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
+ { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
{ GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
+ { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
};
static void __init hx4700_init(void)
{
int ret;
+ PCFR = PCFR_GPR_EN | PCFR_OPDE;
+
pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 6a113a9..7c40739 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -63,7 +63,6 @@
config MACH_HARMONY
bool "Harmony board"
depends on ARCH_TEGRA_2x_SOC
- select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
help
Support for nVidia Harmony development platform
@@ -71,7 +70,6 @@
bool "Kaen board"
depends on ARCH_TEGRA_2x_SOC
select MACH_SEABOARD
- select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
help
Support for the Kaen version of Seaboard
@@ -84,7 +82,6 @@
config MACH_SEABOARD
bool "Seaboard board"
depends on ARCH_TEGRA_2x_SOC
- select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
help
Support for nVidia Seaboard development platform. It will
also be included for some of the derivative boards that
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 9a82094..435f00c 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -2,9 +2,10 @@
params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
-dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
-dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb
-dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
-dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb
-dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra-cardhu.dtb
+dtb-$(CONFIG_MACH_HARMONY) += tegra20-harmony.dtb
+dtb-$(CONFIG_MACH_PAZ00) += tegra20-paz00.dtb
+dtb-$(CONFIG_MACH_SEABOARD) += tegra20-seaboard.dtb
+dtb-$(CONFIG_MACH_TRIMSLICE) += tegra20-trimslice.dtb
+dtb-$(CONFIG_MACH_VENTANA) += tegra20-ventana.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
+dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
index d83a8c0..566e2f8 100644
--- a/arch/arm/mach-tegra/cpuidle.c
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -27,9 +27,9 @@
#include <linux/cpuidle.h>
#include <linux/hrtimer.h>
-#include <mach/iomap.h>
+#include <asm/proc-fns.h>
-extern void tegra_cpu_wfi(void);
+#include <mach/iomap.h>
static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
@@ -64,7 +64,7 @@
enter = ktime_get();
- tegra_cpu_wfi();
+ cpu_do_idle();
exit = ktime_sub(ktime_get(), enter);
us = ktime_to_us(exit);
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index 5b20197..d29b156 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -62,32 +62,3 @@
movw \reg, #:lower16:\val
movt \reg, #:upper16:\val
.endm
-
-/*
- * tegra_cpu_wfi
- *
- * puts current CPU in clock-gated wfi using the flow controller
- *
- * corrupts r0-r3
- * must be called with MMU on
- */
-
-ENTRY(tegra_cpu_wfi)
- cpu_id r0
- cpu_to_halt_reg r1, r0
- cpu_to_csr_reg r2, r0
- mov32 r0, TEGRA_FLOW_CTRL_VIRT
- mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
- str r3, [r0, r2] @ clear event & interrupt status
- mov r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT | FLOW_CTRL_JTAG_RESUME
- str r3, [r0, r1] @ put flow controller in wait irq mode
- dsb
- wfi
- mov r3, #0
- str r3, [r0, r1] @ clear flow controller halt status
- mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
- str r3, [r0, r2] @ clear event & interrupt status
- dsb
- mov pc, lr
-ENDPROC(tegra_cpu_wfi)
-
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index bec933b..e95bf84 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -339,7 +339,6 @@
static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
- int devslot = PCI_SLOT(dev->devfn);
/* slot, pin, irq
* 24 1 27
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index c471436..2e8a1ef 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -64,7 +64,7 @@
#ifdef CONFIG_ZONE_DMA
extern phys_addr_t arm_dma_limit;
#else
-#define arm_dma_limit ((u32)~0)
+#define arm_dma_limit ((phys_addr_t)~0)
#endif
extern phys_addr_t arm_lowmem_limit;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e5dad60..cf4528d 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -791,6 +791,79 @@
}
}
+#ifndef CONFIG_ARM_LPAE
+
+/*
+ * The Linux PMD is made of two consecutive section entries covering 2MB
+ * (see definition in include/asm/pgtable-2level.h). However a call to
+ * create_mapping() may optimize static mappings by using individual
+ * 1MB section mappings. This leaves the actual PMD potentially half
+ * initialized if the top or bottom section entry isn't used, leaving it
+ * open to problems if a subsequent ioremap() or vmalloc() tries to use
+ * the virtual space left free by that unused section entry.
+ *
+ * Let's avoid the issue by inserting dummy vm entries covering the unused
+ * PMD halves once the static mappings are in place.
+ */
+
+static void __init pmd_empty_section_gap(unsigned long addr)
+{
+ struct vm_struct *vm;
+
+ vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
+ vm->addr = (void *)addr;
+ vm->size = SECTION_SIZE;
+ vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+ vm->caller = pmd_empty_section_gap;
+ vm_area_add_early(vm);
+}
+
+static void __init fill_pmd_gaps(void)
+{
+ struct vm_struct *vm;
+ unsigned long addr, next = 0;
+ pmd_t *pmd;
+
+ /* we're still single threaded hence no lock needed here */
+ for (vm = vmlist; vm; vm = vm->next) {
+ if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+ continue;
+ addr = (unsigned long)vm->addr;
+ if (addr < next)
+ continue;
+
+ /*
+ * Check if this vm starts on an odd section boundary.
+ * If so and the first section entry for this PMD is free
+ * then we block the corresponding virtual address.
+ */
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr);
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr & PMD_MASK);
+ }
+
+ /*
+ * Then check if this vm ends on an odd section boundary.
+ * If so and the second section entry for this PMD is empty
+ * then we block the corresponding virtual address.
+ */
+ addr += vm->size;
+ if ((addr & ~PMD_MASK) == SECTION_SIZE) {
+ pmd = pmd_off_k(addr) + 1;
+ if (pmd_none(*pmd))
+ pmd_empty_section_gap(addr);
+ }
+
+ /* no need to look at any vm entry until we hit the next PMD */
+ next = (addr + PMD_SIZE - 1) & PMD_MASK;
+ }
+}
+
+#else
+#define fill_pmd_gaps() do { } while (0)
+#endif
+
static void * __initdata vmalloc_min =
(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
@@ -1072,6 +1145,7 @@
*/
if (mdesc->map_io)
mdesc->map_io();
+ fill_pmd_gaps();
/*
* Finally flush the caches and tlb to ensure that we're in a
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index e429ca1..7cfcc44 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -67,6 +67,7 @@
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
extern int mx27_clocks_init_dt(void);
+extern int mx31_clocks_init_dt(void);
extern int mx51_clocks_init_dt(void);
extern int mx53_clocks_init_dt(void);
extern int mx6q_clocks_init(void);
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index a84aafc..a1044f4 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -810,7 +810,7 @@
lwz r3,VCORE_NAPPING_THREADS(r5)
lwz r4,VCPU_PTID(r9)
li r0,1
- sldi r0,r0,r4
+ sld r0,r0,r4
andc. r3,r3,r0 /* no sense IPI'ing ourselves */
beq 43f
mulli r4,r4,PACA_SIZE /* get paca for thread 0 */
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 0f3ab06..eab3492 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -971,7 +971,7 @@
/* print cpus waiting or in xmon */
printf("cpus stopped:");
count = 0;
- for (cpu = 0; cpu < NR_CPUS; ++cpu) {
+ for_each_possible_cpu(cpu) {
if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
if (count == 0)
printf(" %x", cpu);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index be3cea4..57e168e 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3934,6 +3934,9 @@
{
struct kvm_mmu_page *page;
+ if (list_empty(&kvm->arch.active_mmu_pages))
+ return;
+
page = container_of(kvm->arch.active_mmu_pages.prev,
struct kvm_mmu_page, link);
kvm_mmu_prepare_zap_page(kvm, page, invalid_list);
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 02cf633..e7dee61 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -125,12 +125,8 @@
blkg->pd[i] = pd;
pd->blkg = blkg;
- }
- /* invoke per-policy init */
- for (i = 0; i < BLKCG_MAX_POLS; i++) {
- struct blkcg_policy *pol = blkcg_policy[i];
-
+ /* invoke per-policy init */
if (blkcg_policy_enabled(blkg->q, pol))
pol->pd_init_fn(blkg);
}
@@ -245,10 +241,9 @@
static void blkg_destroy(struct blkcg_gq *blkg)
{
- struct request_queue *q = blkg->q;
struct blkcg *blkcg = blkg->blkcg;
- lockdep_assert_held(q->queue_lock);
+ lockdep_assert_held(blkg->q->queue_lock);
lockdep_assert_held(&blkcg->lock);
/* Something wrong if we are trying to remove same group twice */
diff --git a/block/blk-core.c b/block/blk-core.c
index 3c923a7..93eb3e4 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -361,9 +361,10 @@
*/
void blk_drain_queue(struct request_queue *q, bool drain_all)
{
+ int i;
+
while (true) {
bool drain = false;
- int i;
spin_lock_irq(q->queue_lock);
@@ -408,6 +409,18 @@
break;
msleep(10);
}
+
+ /*
+ * With queue marked dead, any woken up waiter will fail the
+ * allocation path, so the wakeup chaining is lost and we're
+ * left with hung waiters. We need to wake up those waiters.
+ */
+ if (q->request_fn) {
+ spin_lock_irq(q->queue_lock);
+ for (i = 0; i < ARRAY_SIZE(q->rq.wait); i++)
+ wake_up_all(&q->rq.wait[i]);
+ spin_unlock_irq(q->queue_lock);
+ }
}
/**
@@ -467,7 +480,6 @@
/* mark @q DEAD, no new request or merges will be allowed afterwards */
mutex_lock(&q->sysfs_lock);
queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
-
spin_lock_irq(lock);
/*
@@ -485,10 +497,6 @@
queue_flag_set(QUEUE_FLAG_NOMERGES, q);
queue_flag_set(QUEUE_FLAG_NOXMERGES, q);
queue_flag_set(QUEUE_FLAG_DEAD, q);
-
- if (q->queue_lock != &q->__queue_lock)
- q->queue_lock = &q->__queue_lock;
-
spin_unlock_irq(lock);
mutex_unlock(&q->sysfs_lock);
@@ -499,6 +507,11 @@
del_timer_sync(&q->backing_dev_info.laptop_mode_wb_timer);
blk_sync_queue(q);
+ spin_lock_irq(lock);
+ if (q->queue_lock != &q->__queue_lock)
+ q->queue_lock = &q->__queue_lock;
+ spin_unlock_irq(lock);
+
/* @q is and will stay empty, shutdown and put */
blk_put_queue(q);
}
diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index 7803548..6e4744c 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -197,44 +197,3 @@
mod_timer(&q->timeout, expiry);
}
-/**
- * blk_abort_queue -- Abort all request on given queue
- * @queue: pointer to queue
- *
- */
-void blk_abort_queue(struct request_queue *q)
-{
- unsigned long flags;
- struct request *rq, *tmp;
- LIST_HEAD(list);
-
- /*
- * Not a request based block device, nothing to abort
- */
- if (!q->request_fn)
- return;
-
- spin_lock_irqsave(q->queue_lock, flags);
-
- elv_abort_queue(q);
-
- /*
- * Splice entries to local list, to avoid deadlocking if entries
- * get readded to the timeout list by error handling
- */
- list_splice_init(&q->timeout_list, &list);
-
- list_for_each_entry_safe(rq, tmp, &list, timeout_list)
- blk_abort_request(rq);
-
- /*
- * Occasionally, blk_abort_request() will return without
- * deleting the element from the list. Make sure we add those back
- * instead of leaving them on the local stack list.
- */
- list_splice(&list, &q->timeout_list);
-
- spin_unlock_irqrestore(q->queue_lock, flags);
-
-}
-EXPORT_SYMBOL_GPL(blk_abort_queue);
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 673c977..fb52df97 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -17,8 +17,6 @@
#include "blk.h"
#include "blk-cgroup.h"
-static struct blkcg_policy blkcg_policy_cfq __maybe_unused;
-
/*
* tunables
*/
@@ -418,11 +416,6 @@
return pd ? container_of(pd, struct cfq_group, pd) : NULL;
}
-static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg)
-{
- return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq));
-}
-
static inline struct blkcg_gq *cfqg_to_blkg(struct cfq_group *cfqg)
{
return pd_to_blkg(&cfqg->pd);
@@ -572,6 +565,13 @@
#ifdef CONFIG_CFQ_GROUP_IOSCHED
+static struct blkcg_policy blkcg_policy_cfq;
+
+static inline struct cfq_group *blkg_to_cfqg(struct blkcg_gq *blkg)
+{
+ return pd_to_cfqg(blkg_to_pd(blkg, &blkcg_policy_cfq));
+}
+
static inline void cfqg_get(struct cfq_group *cfqg)
{
return blkg_get(cfqg_to_blkg(cfqg));
@@ -3951,10 +3951,11 @@
cfq_shutdown_timer_wq(cfqd);
-#ifndef CONFIG_CFQ_GROUP_IOSCHED
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+ blkcg_deactivate_policy(q, &blkcg_policy_cfq);
+#else
kfree(cfqd->root_group);
#endif
- blkcg_deactivate_policy(q, &blkcg_policy_cfq);
kfree(cfqd);
}
@@ -4194,14 +4195,15 @@
#ifdef CONFIG_CFQ_GROUP_IOSCHED
if (!cfq_group_idle)
cfq_group_idle = 1;
-#else
- cfq_group_idle = 0;
-#endif
ret = blkcg_policy_register(&blkcg_policy_cfq);
if (ret)
return ret;
+#else
+ cfq_group_idle = 0;
+#endif
+ ret = -ENOMEM;
cfq_pool = KMEM_CACHE(cfq_queue, 0);
if (!cfq_pool)
goto err_pol_unreg;
@@ -4215,13 +4217,17 @@
err_free_pool:
kmem_cache_destroy(cfq_pool);
err_pol_unreg:
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
blkcg_policy_unregister(&blkcg_policy_cfq);
+#endif
return ret;
}
static void __exit cfq_exit(void)
{
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
blkcg_policy_unregister(&blkcg_policy_cfq);
+#endif
elv_unregister(&iosched_cfq);
kmem_cache_destroy(cfq_pool);
}
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 260fa80e..9a87daa 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -721,11 +721,14 @@
break;
}
+ if (capable(CAP_SYS_RAWIO))
+ return 0;
+
/* In particular, rule out all resets and host-specific ioctls. */
printk_ratelimited(KERN_WARNING
"%s: sending ioctl %x to a partition!\n", current->comm, cmd);
- return capable(CAP_SYS_RAWIO) ? 0 : -ENOIOCTLCMD;
+ return -ENOIOCTLCMD;
}
EXPORT_SYMBOL(scsi_verify_blk_ioctl);
diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c
index aa0b1f1..0b6f0b2 100644
--- a/drivers/amba/tegra-ahb.c
+++ b/drivers/amba/tegra-ahb.c
@@ -264,11 +264,6 @@
return 0;
}
-static int __devexit tegra_ahb_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
static const struct of_device_id tegra_ahb_of_match[] __devinitconst = {
{ .compatible = "nvidia,tegra30-ahb", },
{ .compatible = "nvidia,tegra20-ahb", },
@@ -277,7 +272,6 @@
static struct platform_driver tegra_ahb_driver = {
.probe = tegra_ahb_probe,
- .remove = __devexit_p(tegra_ahb_remove),
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c
index b5c5ff5..fcb956b 100644
--- a/drivers/block/drbd/drbd_bitmap.c
+++ b/drivers/block/drbd/drbd_bitmap.c
@@ -1475,10 +1475,17 @@
first_word = 0;
spin_lock_irq(&b->bm_lock);
}
-
/* last page (respectively only page, for first page == last page) */
last_word = MLPP(el >> LN2_BPL);
- bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word);
+
+ /* consider bitmap->bm_bits = 32768, bitmap->bm_number_of_pages = 1. (or multiples).
+ * ==> e = 32767, el = 32768, last_page = 2,
+ * and now last_word = 0.
+ * We do not want to touch last_page in this case,
+ * as we did not allocate it, it is not present in bitmap->bm_pages.
+ */
+ if (last_word)
+ bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word);
/* possibly trailing bits.
* example: (e & 63) == 63, el will be e+1.
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 9c5c849..8e93a6a 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -472,12 +472,17 @@
req->rq_state |= RQ_LOCAL_COMPLETED;
req->rq_state &= ~RQ_LOCAL_PENDING;
- D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+ if (req->rq_state & RQ_LOCAL_ABORTED) {
+ _req_may_be_done(req, m);
+ break;
+ }
__drbd_chk_io_error(mdev, false);
goto_queue_for_net_read:
+ D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+
/* no point in retrying if there is no good remote data,
* or we have no connection. */
if (mdev->state.pdsk != D_UP_TO_DATE) {
@@ -765,6 +770,40 @@
return 0 == drbd_bm_count_bits(mdev, sbnr, ebnr);
}
+static void maybe_pull_ahead(struct drbd_conf *mdev)
+{
+ int congested = 0;
+
+ /* If I don't even have good local storage, we can not reasonably try
+ * to pull ahead of the peer. We also need the local reference to make
+ * sure mdev->act_log is there.
+ * Note: caller has to make sure that net_conf is there.
+ */
+ if (!get_ldev_if_state(mdev, D_UP_TO_DATE))
+ return;
+
+ if (mdev->net_conf->cong_fill &&
+ atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) {
+ dev_info(DEV, "Congestion-fill threshold reached\n");
+ congested = 1;
+ }
+
+ if (mdev->act_log->used >= mdev->net_conf->cong_extents) {
+ dev_info(DEV, "Congestion-extents threshold reached\n");
+ congested = 1;
+ }
+
+ if (congested) {
+ queue_barrier(mdev); /* last barrier, after mirrored writes */
+
+ if (mdev->net_conf->on_congestion == OC_PULL_AHEAD)
+ _drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL);
+ else /*mdev->net_conf->on_congestion == OC_DISCONNECT */
+ _drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL);
+ }
+ put_ldev(mdev);
+}
+
static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, unsigned long start_time)
{
const int rw = bio_rw(bio);
@@ -972,29 +1011,8 @@
_req_mod(req, queue_for_send_oos);
if (remote &&
- mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) {
- int congested = 0;
-
- if (mdev->net_conf->cong_fill &&
- atomic_read(&mdev->ap_in_flight) >= mdev->net_conf->cong_fill) {
- dev_info(DEV, "Congestion-fill threshold reached\n");
- congested = 1;
- }
-
- if (mdev->act_log->used >= mdev->net_conf->cong_extents) {
- dev_info(DEV, "Congestion-extents threshold reached\n");
- congested = 1;
- }
-
- if (congested) {
- queue_barrier(mdev); /* last barrier, after mirrored writes */
-
- if (mdev->net_conf->on_congestion == OC_PULL_AHEAD)
- _drbd_set_state(_NS(mdev, conn, C_AHEAD), 0, NULL);
- else /*mdev->net_conf->on_congestion == OC_DISCONNECT */
- _drbd_set_state(_NS(mdev, conn, C_DISCONNECTING), 0, NULL);
- }
- }
+ mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96)
+ maybe_pull_ahead(mdev);
spin_unlock_irq(&mdev->req_lock);
kfree(b); /* if someone else has beaten us to it... */
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index cce7df3..553f43a 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -671,6 +671,7 @@
if (drive == current_reqD)
drive = current_drive;
+ __cancel_delayed_work(&fd_timeout);
if (drive < 0 || drive >= N_DRIVE) {
delay = 20UL * HZ;
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 264bc77..a8fddeb 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -37,6 +37,7 @@
#include <linux/kthread.h>
#include <../drivers/ata/ahci.h>
#include <linux/export.h>
+#include <linux/debugfs.h>
#include "mtip32xx.h"
#define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32)
@@ -85,6 +86,7 @@
* allocated in mtip_init().
*/
static int mtip_major;
+static struct dentry *dfs_parent;
static DEFINE_SPINLOCK(rssd_index_lock);
static DEFINE_IDA(rssd_index_ida);
@@ -2546,7 +2548,7 @@
}
/*
- * Sysfs register/status dump.
+ * Sysfs status dump.
*
* @dev Pointer to the device structure, passed by the kernrel.
* @attr Pointer to the device_attribute structure passed by the kernel.
@@ -2555,71 +2557,6 @@
* return value
* The size, in bytes, of the data copied into buf.
*/
-static ssize_t mtip_hw_show_registers(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- u32 group_allocated;
- struct driver_data *dd = dev_to_disk(dev)->private_data;
- int size = 0;
- int n;
-
- size += sprintf(&buf[size], "Hardware\n--------\n");
- size += sprintf(&buf[size], "S ACTive : [ 0x");
-
- for (n = dd->slot_groups-1; n >= 0; n--)
- size += sprintf(&buf[size], "%08X ",
- readl(dd->port->s_active[n]));
-
- size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "Command Issue : [ 0x");
-
- for (n = dd->slot_groups-1; n >= 0; n--)
- size += sprintf(&buf[size], "%08X ",
- readl(dd->port->cmd_issue[n]));
-
- size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "Completed : [ 0x");
-
- for (n = dd->slot_groups-1; n >= 0; n--)
- size += sprintf(&buf[size], "%08X ",
- readl(dd->port->completed[n]));
-
- size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "PORT IRQ STAT : [ 0x%08X ]\n",
- readl(dd->port->mmio + PORT_IRQ_STAT));
- size += sprintf(&buf[size], "HOST IRQ STAT : [ 0x%08X ]\n",
- readl(dd->mmio + HOST_IRQ_STAT));
- size += sprintf(&buf[size], "\n");
-
- size += sprintf(&buf[size], "Local\n-----\n");
- size += sprintf(&buf[size], "Allocated : [ 0x");
-
- for (n = dd->slot_groups-1; n >= 0; n--) {
- if (sizeof(long) > sizeof(u32))
- group_allocated =
- dd->port->allocated[n/2] >> (32*(n&1));
- else
- group_allocated = dd->port->allocated[n];
- size += sprintf(&buf[size], "%08X ", group_allocated);
- }
- size += sprintf(&buf[size], "]\n");
-
- size += sprintf(&buf[size], "Commands in Q: [ 0x");
-
- for (n = dd->slot_groups-1; n >= 0; n--) {
- if (sizeof(long) > sizeof(u32))
- group_allocated =
- dd->port->cmds_to_issue[n/2] >> (32*(n&1));
- else
- group_allocated = dd->port->cmds_to_issue[n];
- size += sprintf(&buf[size], "%08X ", group_allocated);
- }
- size += sprintf(&buf[size], "]\n");
-
- return size;
-}
-
static ssize_t mtip_hw_show_status(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -2637,24 +2574,121 @@
return size;
}
-static ssize_t mtip_hw_show_flags(struct device *dev,
- struct device_attribute *attr,
- char *buf)
+static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
+
+static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf,
+ size_t len, loff_t *offset)
{
- struct driver_data *dd = dev_to_disk(dev)->private_data;
- int size = 0;
+ struct driver_data *dd = (struct driver_data *)f->private_data;
+ char buf[MTIP_DFS_MAX_BUF_SIZE];
+ u32 group_allocated;
+ int size = *offset;
+ int n;
- size += sprintf(&buf[size], "Flag in port struct : [ %08lX ]\n",
- dd->port->flags);
- size += sprintf(&buf[size], "Flag in dd struct : [ %08lX ]\n",
- dd->dd_flag);
+ if (!len || size)
+ return 0;
- return size;
+ if (size < 0)
+ return -EINVAL;
+
+ size += sprintf(&buf[size], "H/ S ACTive : [ 0x");
+
+ for (n = dd->slot_groups-1; n >= 0; n--)
+ size += sprintf(&buf[size], "%08X ",
+ readl(dd->port->s_active[n]));
+
+ size += sprintf(&buf[size], "]\n");
+ size += sprintf(&buf[size], "H/ Command Issue : [ 0x");
+
+ for (n = dd->slot_groups-1; n >= 0; n--)
+ size += sprintf(&buf[size], "%08X ",
+ readl(dd->port->cmd_issue[n]));
+
+ size += sprintf(&buf[size], "]\n");
+ size += sprintf(&buf[size], "H/ Completed : [ 0x");
+
+ for (n = dd->slot_groups-1; n >= 0; n--)
+ size += sprintf(&buf[size], "%08X ",
+ readl(dd->port->completed[n]));
+
+ size += sprintf(&buf[size], "]\n");
+ size += sprintf(&buf[size], "H/ PORT IRQ STAT : [ 0x%08X ]\n",
+ readl(dd->port->mmio + PORT_IRQ_STAT));
+ size += sprintf(&buf[size], "H/ HOST IRQ STAT : [ 0x%08X ]\n",
+ readl(dd->mmio + HOST_IRQ_STAT));
+ size += sprintf(&buf[size], "\n");
+
+ size += sprintf(&buf[size], "L/ Allocated : [ 0x");
+
+ for (n = dd->slot_groups-1; n >= 0; n--) {
+ if (sizeof(long) > sizeof(u32))
+ group_allocated =
+ dd->port->allocated[n/2] >> (32*(n&1));
+ else
+ group_allocated = dd->port->allocated[n];
+ size += sprintf(&buf[size], "%08X ", group_allocated);
+ }
+ size += sprintf(&buf[size], "]\n");
+
+ size += sprintf(&buf[size], "L/ Commands in Q : [ 0x");
+
+ for (n = dd->slot_groups-1; n >= 0; n--) {
+ if (sizeof(long) > sizeof(u32))
+ group_allocated =
+ dd->port->cmds_to_issue[n/2] >> (32*(n&1));
+ else
+ group_allocated = dd->port->cmds_to_issue[n];
+ size += sprintf(&buf[size], "%08X ", group_allocated);
+ }
+ size += sprintf(&buf[size], "]\n");
+
+ *offset = size <= len ? size : len;
+ size = copy_to_user(ubuf, buf, *offset);
+ if (size)
+ return -EFAULT;
+
+ return *offset;
}
-static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL);
-static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
-static DEVICE_ATTR(flags, S_IRUGO, mtip_hw_show_flags, NULL);
+static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf,
+ size_t len, loff_t *offset)
+{
+ struct driver_data *dd = (struct driver_data *)f->private_data;
+ char buf[MTIP_DFS_MAX_BUF_SIZE];
+ int size = *offset;
+
+ if (!len || size)
+ return 0;
+
+ if (size < 0)
+ return -EINVAL;
+
+ size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n",
+ dd->port->flags);
+ size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n",
+ dd->dd_flag);
+
+ *offset = size <= len ? size : len;
+ size = copy_to_user(ubuf, buf, *offset);
+ if (size)
+ return -EFAULT;
+
+ return *offset;
+}
+
+static const struct file_operations mtip_regs_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = mtip_hw_read_registers,
+ .llseek = no_llseek,
+};
+
+static const struct file_operations mtip_flags_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = mtip_hw_read_flags,
+ .llseek = no_llseek,
+};
/*
* Create the sysfs related attributes.
@@ -2671,15 +2705,9 @@
if (!kobj || !dd)
return -EINVAL;
- if (sysfs_create_file(kobj, &dev_attr_registers.attr))
- dev_warn(&dd->pdev->dev,
- "Error creating 'registers' sysfs entry\n");
if (sysfs_create_file(kobj, &dev_attr_status.attr))
dev_warn(&dd->pdev->dev,
"Error creating 'status' sysfs entry\n");
- if (sysfs_create_file(kobj, &dev_attr_flags.attr))
- dev_warn(&dd->pdev->dev,
- "Error creating 'flags' sysfs entry\n");
return 0;
}
@@ -2698,13 +2726,39 @@
if (!kobj || !dd)
return -EINVAL;
- sysfs_remove_file(kobj, &dev_attr_registers.attr);
sysfs_remove_file(kobj, &dev_attr_status.attr);
- sysfs_remove_file(kobj, &dev_attr_flags.attr);
return 0;
}
+static int mtip_hw_debugfs_init(struct driver_data *dd)
+{
+ if (!dfs_parent)
+ return -1;
+
+ dd->dfs_node = debugfs_create_dir(dd->disk->disk_name, dfs_parent);
+ if (IS_ERR_OR_NULL(dd->dfs_node)) {
+ dev_warn(&dd->pdev->dev,
+ "Error creating node %s under debugfs\n",
+ dd->disk->disk_name);
+ dd->dfs_node = NULL;
+ return -1;
+ }
+
+ debugfs_create_file("flags", S_IRUGO, dd->dfs_node, dd,
+ &mtip_flags_fops);
+ debugfs_create_file("registers", S_IRUGO, dd->dfs_node, dd,
+ &mtip_regs_fops);
+
+ return 0;
+}
+
+static void mtip_hw_debugfs_exit(struct driver_data *dd)
+{
+ debugfs_remove_recursive(dd->dfs_node);
+}
+
+
/*
* Perform any init/resume time hardware setup
*
@@ -3730,6 +3784,7 @@
mtip_hw_sysfs_init(dd, kobj);
kobject_put(kobj);
}
+ mtip_hw_debugfs_init(dd);
if (dd->mtip_svc_handler) {
set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
@@ -3755,6 +3810,8 @@
return rv;
kthread_run_error:
+ mtip_hw_debugfs_exit(dd);
+
/* Delete our gendisk. This also removes the device from /dev */
del_gendisk(dd->disk);
@@ -3805,6 +3862,7 @@
kobject_put(kobj);
}
}
+ mtip_hw_debugfs_exit(dd);
/*
* Delete our gendisk structure. This also removes the device
@@ -4152,10 +4210,20 @@
}
mtip_major = error;
+ if (!dfs_parent) {
+ dfs_parent = debugfs_create_dir("rssd", NULL);
+ if (IS_ERR_OR_NULL(dfs_parent)) {
+ printk(KERN_WARNING "Error creating debugfs parent\n");
+ dfs_parent = NULL;
+ }
+ }
+
/* Register our PCI operations. */
error = pci_register_driver(&mtip_pci_driver);
- if (error)
+ if (error) {
+ debugfs_remove(dfs_parent);
unregister_blkdev(mtip_major, MTIP_DRV_NAME);
+ }
return error;
}
@@ -4172,6 +4240,8 @@
*/
static void __exit mtip_exit(void)
{
+ debugfs_remove_recursive(dfs_parent);
+
/* Release the allocated major block device number. */
unregister_blkdev(mtip_major, MTIP_DRV_NAME);
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index b2c88da..f51fc23 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -26,7 +26,6 @@
#include <linux/ata.h>
#include <linux/interrupt.h>
#include <linux/genhd.h>
-#include <linux/version.h>
/* Offset of Subsystem Device ID in pci confoguration space */
#define PCI_SUBSYSTEM_DEVICEID 0x2E
@@ -111,6 +110,8 @@
#define dbg_printk(format, arg...)
#endif
+#define MTIP_DFS_MAX_BUF_SIZE 1024
+
#define __force_bit2int (unsigned int __force)
enum {
@@ -447,6 +448,8 @@
unsigned long dd_flag; /* NOTE: use atomic bit operations on this */
struct task_struct *mtip_svc_handler; /* task_struct of svc thd */
+
+ struct dentry *dfs_node;
};
#endif
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index aa27120..9a72277 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -513,6 +513,44 @@
}
}
+struct mm_plug_cb {
+ struct blk_plug_cb cb;
+ struct cardinfo *card;
+};
+
+static void mm_unplug(struct blk_plug_cb *cb)
+{
+ struct mm_plug_cb *mmcb = container_of(cb, struct mm_plug_cb, cb);
+
+ spin_lock_irq(&mmcb->card->lock);
+ activate(mmcb->card);
+ spin_unlock_irq(&mmcb->card->lock);
+ kfree(mmcb);
+}
+
+static int mm_check_plugged(struct cardinfo *card)
+{
+ struct blk_plug *plug = current->plug;
+ struct mm_plug_cb *mmcb;
+
+ if (!plug)
+ return 0;
+
+ list_for_each_entry(mmcb, &plug->cb_list, cb.list) {
+ if (mmcb->cb.callback == mm_unplug && mmcb->card == card)
+ return 1;
+ }
+ /* Not currently on the callback list */
+ mmcb = kmalloc(sizeof(*mmcb), GFP_ATOMIC);
+ if (!mmcb)
+ return 0;
+
+ mmcb->card = card;
+ mmcb->cb.callback = mm_unplug;
+ list_add(&mmcb->cb.list, &plug->cb_list);
+ return 1;
+}
+
static void mm_make_request(struct request_queue *q, struct bio *bio)
{
struct cardinfo *card = q->queuedata;
@@ -523,6 +561,8 @@
*card->biotail = bio;
bio->bi_next = NULL;
card->biotail = &bio->bi_next;
+ if (bio->bi_rw & REQ_SYNC || !mm_check_plugged(card))
+ activate(card);
spin_unlock_irq(&card->lock);
return;
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 773cf27..9ad3b5e 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -257,6 +257,7 @@
break;
case BLKIF_OP_DISCARD:
dst->u.discard.flag = src->u.discard.flag;
+ dst->u.discard.id = src->u.discard.id;
dst->u.discard.sector_number = src->u.discard.sector_number;
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
@@ -287,6 +288,7 @@
break;
case BLKIF_OP_DISCARD:
dst->u.discard.flag = src->u.discard.flag;
+ dst->u.discard.id = src->u.discard.id;
dst->u.discard.sector_number = src->u.discard.sector_number;
dst->u.discard.nr_sectors = src->u.discard.nr_sectors;
break;
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 60eed4b..e4fb337 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -141,14 +141,36 @@
return free;
}
-static void add_id_to_freelist(struct blkfront_info *info,
+static int add_id_to_freelist(struct blkfront_info *info,
unsigned long id)
{
+ if (info->shadow[id].req.u.rw.id != id)
+ return -EINVAL;
+ if (info->shadow[id].request == NULL)
+ return -EINVAL;
info->shadow[id].req.u.rw.id = info->shadow_free;
info->shadow[id].request = NULL;
info->shadow_free = id;
+ return 0;
}
+static const char *op_name(int op)
+{
+ static const char *const names[] = {
+ [BLKIF_OP_READ] = "read",
+ [BLKIF_OP_WRITE] = "write",
+ [BLKIF_OP_WRITE_BARRIER] = "barrier",
+ [BLKIF_OP_FLUSH_DISKCACHE] = "flush",
+ [BLKIF_OP_DISCARD] = "discard" };
+
+ if (op < 0 || op >= ARRAY_SIZE(names))
+ return "unknown";
+
+ if (!names[op])
+ return "reserved";
+
+ return names[op];
+}
static int xlbd_reserve_minors(unsigned int minor, unsigned int nr)
{
unsigned int end = minor + nr;
@@ -746,20 +768,36 @@
bret = RING_GET_RESPONSE(&info->ring, i);
id = bret->id;
+ /*
+ * The backend has messed up and given us an id that we would
+ * never have given to it (we stamp it up to BLK_RING_SIZE -
+ * look in get_id_from_freelist.
+ */
+ if (id >= BLK_RING_SIZE) {
+ WARN(1, "%s: response to %s has incorrect id (%ld)\n",
+ info->gd->disk_name, op_name(bret->operation), id);
+ /* We can't safely get the 'struct request' as
+ * the id is busted. */
+ continue;
+ }
req = info->shadow[id].request;
if (bret->operation != BLKIF_OP_DISCARD)
blkif_completion(&info->shadow[id]);
- add_id_to_freelist(info, id);
+ if (add_id_to_freelist(info, id)) {
+ WARN(1, "%s: response to %s (id %ld) couldn't be recycled!\n",
+ info->gd->disk_name, op_name(bret->operation), id);
+ continue;
+ }
error = (bret->status == BLKIF_RSP_OKAY) ? 0 : -EIO;
switch (bret->operation) {
case BLKIF_OP_DISCARD:
if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
struct request_queue *rq = info->rq;
- printk(KERN_WARNING "blkfront: %s: discard op failed\n",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
info->feature_discard = 0;
info->feature_secdiscard = 0;
@@ -771,18 +809,14 @@
case BLKIF_OP_FLUSH_DISKCACHE:
case BLKIF_OP_WRITE_BARRIER:
if (unlikely(bret->status == BLKIF_RSP_EOPNOTSUPP)) {
- printk(KERN_WARNING "blkfront: %s: write %s op failed\n",
- info->flush_op == BLKIF_OP_WRITE_BARRIER ?
- "barrier" : "flush disk cache",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
}
if (unlikely(bret->status == BLKIF_RSP_ERROR &&
info->shadow[id].req.u.rw.nr_segments == 0)) {
- printk(KERN_WARNING "blkfront: %s: empty write %s op failed\n",
- info->flush_op == BLKIF_OP_WRITE_BARRIER ?
- "barrier" : "flush disk cache",
- info->gd->disk_name);
+ printk(KERN_WARNING "blkfront: %s: empty %s op failed\n",
+ info->gd->disk_name, op_name(bret->operation));
error = -EOPNOTSUPP;
}
if (unlikely(error)) {
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index b9a5158..26b6b92 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -3,5 +3,6 @@
obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \
clk-mux.o clk-divider.o clk-fixed-factor.o
# SoCs specific
+obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
obj-$(CONFIG_ARCH_MXS) += mxs/
obj-$(CONFIG_PLAT_SPEAR) += spear/
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
new file mode 100644
index 0000000..517a8ff
--- /dev/null
+++ b/drivers/clk/clk-nomadik.c
@@ -0,0 +1,47 @@
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+/*
+ * The Nomadik clock tree is described in the STN8815A12 DB V4.2
+ * reference manual for the chip, page 94 ff.
+ */
+
+void __init nomadik_clk_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
+ clk_register_clkdev(clk, "apb_pclk", NULL);
+ clk_register_clkdev(clk, NULL, "gpio.0");
+ clk_register_clkdev(clk, NULL, "gpio.1");
+ clk_register_clkdev(clk, NULL, "gpio.2");
+ clk_register_clkdev(clk, NULL, "gpio.3");
+ clk_register_clkdev(clk, NULL, "rng");
+
+ /*
+ * The 2.4 MHz TIMCLK reference clock is active at boot time, this is
+ * actually the MXTALCLK @19.2 MHz divided by 8. This clock is used
+ * by the timers and watchdog. See page 105 ff.
+ */
+ clk = clk_register_fixed_rate(NULL, "TIMCLK", NULL, CLK_IS_ROOT,
+ 2400000);
+ clk_register_clkdev(clk, NULL, "mtu0");
+ clk_register_clkdev(clk, NULL, "mtu1");
+
+ /*
+ * At boot time, PLL2 is set to generate a set of fixed clocks,
+ * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD
+ * I2C, IrDA, USB and SSP blocks.
+ */
+ clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT,
+ 48000000);
+ clk_register_clkdev(clk, NULL, "uart0");
+ clk_register_clkdev(clk, NULL, "uart1");
+ clk_register_clkdev(clk, NULL, "mmci");
+ clk_register_clkdev(clk, NULL, "ssp");
+ clk_register_clkdev(clk, NULL, "nmk-i2c.0");
+ clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+}
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index dcbe056..9a1eb0c 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1067,26 +1067,24 @@
old_parent = clk->parent;
- /* find index of new parent clock using cached parent ptrs */
- if (clk->parents)
- for (i = 0; i < clk->num_parents; i++)
- if (clk->parents[i] == parent)
- break;
- else
+ if (!clk->parents)
clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
GFP_KERNEL);
/*
- * find index of new parent clock using string name comparison
- * also try to cache the parent to avoid future calls to __clk_lookup
+ * find index of new parent clock using cached parent ptrs,
+ * or if not yet cached, use string name comparison and cache
+ * them now to avoid future calls to __clk_lookup.
*/
- if (i == clk->num_parents)
- for (i = 0; i < clk->num_parents; i++)
- if (!strcmp(clk->parent_names[i], parent->name)) {
- if (clk->parents)
- clk->parents[i] = __clk_lookup(parent->name);
- break;
- }
+ for (i = 0; i < clk->num_parents; i++) {
+ if (clk->parents && clk->parents[i] == parent)
+ break;
+ else if (!strcmp(clk->parent_names[i], parent->name)) {
+ if (clk->parents)
+ clk->parents[i] = __clk_lookup(parent->name);
+ break;
+ }
+ }
if (i == clk->num_parents) {
pr_debug("%s: clock %s is not a possible parent of clock %s\n",
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 5873e48..a8743c3 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -1039,6 +1039,24 @@
return true;
}
+static bool valid_inferred_mode(const struct drm_connector *connector,
+ const struct drm_display_mode *mode)
+{
+ struct drm_display_mode *m;
+ bool ok = false;
+
+ list_for_each_entry(m, &connector->probed_modes, head) {
+ if (mode->hdisplay == m->hdisplay &&
+ mode->vdisplay == m->vdisplay &&
+ drm_mode_vrefresh(mode) == drm_mode_vrefresh(m))
+ return false; /* duplicated */
+ if (mode->hdisplay <= m->hdisplay &&
+ mode->vdisplay <= m->vdisplay)
+ ok = true;
+ }
+ return ok;
+}
+
static int
drm_dmt_modes_for_range(struct drm_connector *connector, struct edid *edid,
struct detailed_timing *timing)
@@ -1048,7 +1066,8 @@
struct drm_device *dev = connector->dev;
for (i = 0; i < drm_num_dmt_modes; i++) {
- if (mode_in_range(drm_dmt_modes + i, edid, timing)) {
+ if (mode_in_range(drm_dmt_modes + i, edid, timing) &&
+ valid_inferred_mode(connector, drm_dmt_modes + i)) {
newmode = drm_mode_duplicate(dev, &drm_dmt_modes[i]);
if (newmode) {
drm_mode_probed_add(connector, newmode);
@@ -1088,7 +1107,8 @@
return modes;
fixup_mode_1366x768(newmode);
- if (!mode_in_range(newmode, edid, timing)) {
+ if (!mode_in_range(newmode, edid, timing) ||
+ !valid_inferred_mode(connector, newmode)) {
drm_mode_destroy(dev, newmode);
continue;
}
@@ -1116,7 +1136,8 @@
return modes;
fixup_mode_1366x768(newmode);
- if (!mode_in_range(newmode, edid, timing)) {
+ if (!mode_in_range(newmode, edid, timing) ||
+ !valid_inferred_mode(connector, newmode)) {
drm_mode_destroy(dev, newmode);
continue;
}
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index f947926..36822b9 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1401,6 +1401,27 @@
}
}
+static void i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
+{
+ struct apertures_struct *ap;
+ struct pci_dev *pdev = dev_priv->dev->pdev;
+ bool primary;
+
+ ap = alloc_apertures(1);
+ if (!ap)
+ return;
+
+ ap->ranges[0].base = dev_priv->dev->agp->base;
+ ap->ranges[0].size =
+ dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
+ primary =
+ pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+
+ remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
+
+ kfree(ap);
+}
+
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
@@ -1446,6 +1467,15 @@
goto free_priv;
}
+ dev_priv->mm.gtt = intel_gtt_get();
+ if (!dev_priv->mm.gtt) {
+ DRM_ERROR("Failed to initialize GTT\n");
+ ret = -ENODEV;
+ goto put_bridge;
+ }
+
+ i915_kick_out_firmware_fb(dev_priv);
+
pci_set_master(dev->pdev);
/* overlay on gen2 is broken and can't address above 1G */
@@ -1471,13 +1501,6 @@
goto put_bridge;
}
- dev_priv->mm.gtt = intel_gtt_get();
- if (!dev_priv->mm.gtt) {
- DRM_ERROR("Failed to initialize GTT\n");
- ret = -ENODEV;
- goto out_rmmap;
- }
-
aperture_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
dev_priv->mm.gtt_mapping =
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index 59d4493..84b648a 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -289,8 +289,9 @@
rdev->vm_manager.enabled = false;
/* mark first vm as always in use, it's the system one */
+ /* allocate enough for 2 full VM pts */
r = radeon_sa_bo_manager_init(rdev, &rdev->vm_manager.sa_manager,
- rdev->vm_manager.max_pfn * 8,
+ rdev->vm_manager.max_pfn * 8 * 2,
RADEON_GEM_DOMAIN_VRAM);
if (r) {
dev_err(rdev->dev, "failed to allocate vm bo (%dKB)\n",
@@ -633,7 +634,15 @@
mutex_init(&vm->mutex);
INIT_LIST_HEAD(&vm->list);
INIT_LIST_HEAD(&vm->va);
- vm->last_pfn = 0;
+ /* SI requires equal sized PTs for all VMs, so always set
+ * last_pfn to max_pfn. cayman allows variable sized
+ * pts so we can grow then as needed. Once we switch
+ * to two level pts we can unify this again.
+ */
+ if (rdev->family >= CHIP_TAHITI)
+ vm->last_pfn = rdev->vm_manager.max_pfn;
+ else
+ vm->last_pfn = 0;
/* map the ib pool buffer at 0 in virtual address space, set
* read only
*/
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index f28bd4b..21ec9f5 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -292,6 +292,7 @@
int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
{
+ struct radeon_device *rdev = dev->dev_private;
struct drm_radeon_gem_busy *args = data;
struct drm_gem_object *gobj;
struct radeon_bo *robj;
@@ -317,13 +318,14 @@
break;
}
drm_gem_object_unreference_unlocked(gobj);
- r = radeon_gem_handle_lockup(robj->rdev, r);
+ r = radeon_gem_handle_lockup(rdev, r);
return r;
}
int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
struct drm_file *filp)
{
+ struct radeon_device *rdev = dev->dev_private;
struct drm_radeon_gem_wait_idle *args = data;
struct drm_gem_object *gobj;
struct radeon_bo *robj;
@@ -336,10 +338,10 @@
robj = gem_to_radeon_bo(gobj);
r = radeon_bo_wait(robj, NULL, false);
/* callback hw specific functions if any */
- if (robj->rdev->asic->ioctl_wait_idle)
- robj->rdev->asic->ioctl_wait_idle(robj->rdev, robj);
+ if (rdev->asic->ioctl_wait_idle)
+ robj->rdev->asic->ioctl_wait_idle(rdev, robj);
drm_gem_object_unreference_unlocked(gobj);
- r = radeon_gem_handle_lockup(robj->rdev, r);
+ r = radeon_gem_handle_lockup(rdev, r);
return r;
}
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index c7b61f1..0b02792 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -2365,12 +2365,12 @@
WREG32(0x15DC, 0);
/* empty context1-15 */
- /* FIXME start with 1G, once using 2 level pt switch to full
+ /* FIXME start with 4G, once using 2 level pt switch to full
* vm size space
*/
/* set vm size, must be a multiple of 4 */
WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0);
- WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, (1 << 30) / RADEON_GPU_PAGE_SIZE);
+ WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn);
for (i = 1; i < 16; i++) {
if (i < 8)
WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2),
diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c
index 57d19d4..c96653b 100644
--- a/drivers/input/joystick/as5011.c
+++ b/drivers/input/joystick/as5011.c
@@ -282,7 +282,8 @@
error = request_threaded_irq(as5011->button_irq,
NULL, as5011_button_interrupt,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"as5011_button", as5011);
if (error < 0) {
dev_err(&client->dev,
@@ -296,7 +297,7 @@
error = request_threaded_irq(as5011->axis_irq, NULL,
as5011_axis_interrupt,
- plat_data->axis_irqflags,
+ plat_data->axis_irqflags | IRQF_ONESHOT,
"as5011_joystick", as5011);
if (error) {
dev_err(&client->dev,
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
index 64a0ca4..0d77f6c 100644
--- a/drivers/input/keyboard/mcs_touchkey.c
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -178,7 +178,8 @@
}
error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
- IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_mem;
diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
index caa218a..7613f1c 100644
--- a/drivers/input/keyboard/mpr121_touchkey.c
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -248,7 +248,7 @@
error = request_threaded_irq(client->irq, NULL,
mpr_touchkey_interrupt,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->dev.driver->name, mpr121);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c
index 0b7b2f8..ca68f29 100644
--- a/drivers/input/keyboard/qt1070.c
+++ b/drivers/input/keyboard/qt1070.c
@@ -201,7 +201,8 @@
msleep(QT1070_RESET_TIME);
err = request_threaded_irq(client->irq, NULL, qt1070_interrupt,
- IRQF_TRIGGER_NONE, client->dev.driver->name, data);
+ IRQF_TRIGGER_NONE | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (err) {
dev_err(&client->dev, "fail to request irq\n");
goto err_free_mem;
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 3afea3f..c355cdd 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -278,7 +278,8 @@
error = request_threaded_irq(chip->irqnum, NULL,
tca6416_keys_isr,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
"tca6416-keypad", chip);
if (error) {
dev_dbg(&client->dev,
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
index 5f87b28..893869b 100644
--- a/drivers/input/keyboard/tca8418_keypad.c
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -360,7 +360,7 @@
client->irq = gpio_to_irq(client->irq);
error = request_threaded_irq(client->irq, NULL, tca8418_irq_handler,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, keypad_data);
if (error) {
dev_dbg(&client->dev,
diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c
index a4a445f..4c34f21 100644
--- a/drivers/input/keyboard/tnetv107x-keypad.c
+++ b/drivers/input/keyboard/tnetv107x-keypad.c
@@ -227,15 +227,15 @@
goto error_clk;
}
- error = request_threaded_irq(kp->irq_press, NULL, keypad_irq, 0,
- dev_name(dev), kp);
+ error = request_threaded_irq(kp->irq_press, NULL, keypad_irq,
+ IRQF_ONESHOT, dev_name(dev), kp);
if (error < 0) {
dev_err(kp->dev, "Could not allocate keypad press key irq\n");
goto error_irq_press;
}
- error = request_threaded_irq(kp->irq_release, NULL, keypad_irq, 0,
- dev_name(dev), kp);
+ error = request_threaded_irq(kp->irq_release, NULL, keypad_irq,
+ IRQF_ONESHOT, dev_name(dev), kp);
if (error < 0) {
dev_err(kp->dev, "Could not allocate keypad release key irq\n");
goto error_irq_release;
diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c
index 0ac75bb..2e5d5e1 100644
--- a/drivers/input/misc/ad714x.c
+++ b/drivers/input/misc/ad714x.c
@@ -972,6 +972,7 @@
struct ad714x_platform_data *plat_data = dev->platform_data;
struct ad714x_chip *ad714x;
void *drv_mem;
+ unsigned long irqflags;
struct ad714x_button_drv *bt_drv;
struct ad714x_slider_drv *sd_drv;
@@ -1162,10 +1163,11 @@
alloc_idx++;
}
+ irqflags = plat_data->irqflags ?: IRQF_TRIGGER_FALLING;
+ irqflags |= IRQF_ONESHOT;
+
error = request_threaded_irq(ad714x->irq, NULL, ad714x_interrupt_thread,
- plat_data->irqflags ?
- plat_data->irqflags : IRQF_TRIGGER_FALLING,
- "ad714x_captouch", ad714x);
+ irqflags, "ad714x_captouch", ad714x);
if (error) {
dev_err(dev, "can't allocate irq %d\n", ad714x->irq);
goto err_unreg_dev;
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
index 35083c6..c1313d8 100644
--- a/drivers/input/misc/dm355evm_keys.c
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -213,7 +213,8 @@
/* REVISIT: flush the event queue? */
status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
- IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&pdev->dev), keys);
if (status < 0)
goto fail2;
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index cad5602..8b31473 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -216,7 +216,7 @@
rep_data[0] = 12;
result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
- rep_data[0], &rep_data, 2,
+ rep_data[0], rep_data, 2,
WAC_MSG_RETRIES);
if (result >= 0 && rep_data[1] > 2)
@@ -401,7 +401,9 @@
break;
case HID_USAGE_CONTACTMAX:
- wacom_retrieve_report_data(intf, features);
+ /* leave touch_max as is if predefined */
+ if (!features->touch_max)
+ wacom_retrieve_report_data(intf, features);
i++;
break;
}
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index e2482b4..bd4eb42 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -597,7 +597,7 @@
AD7879_TMR(ts->pen_down_acc_interval);
err = request_threaded_irq(ts->irq, NULL, ad7879_irq,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
dev_name(dev), ts);
if (err) {
dev_err(dev, "irq %d busy?\n", ts->irq);
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 42e6450..25fd056 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1149,7 +1149,8 @@
goto err_free_object;
error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
- pdata->irqflags, client->dev.driver->name, data);
+ pdata->irqflags | IRQF_ONESHOT,
+ client->dev.driver->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_object;
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index f2d03c0..5c487d2 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -509,7 +509,8 @@
input_set_drvdata(in_dev, bu21013_data);
error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq,
- IRQF_TRIGGER_FALLING | IRQF_SHARED,
+ IRQF_TRIGGER_FALLING | IRQF_SHARED |
+ IRQF_ONESHOT,
DRIVER_TP, bu21013_data);
if (error) {
dev_err(&client->dev, "request irq %d failed\n", pdata->irq);
diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c
index 237753a..464f1bf 100644
--- a/drivers/input/touchscreen/cy8ctmg110_ts.c
+++ b/drivers/input/touchscreen/cy8ctmg110_ts.c
@@ -251,7 +251,8 @@
}
err = request_threaded_irq(client->irq, NULL, cy8ctmg110_irq_thread,
- IRQF_TRIGGER_RISING, "touch_reset_key", ts);
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "touch_reset_key", ts);
if (err < 0) {
dev_err(&client->dev,
"irq %d busy? error %d\n", client->irq, err);
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
index 3cd7a83..cf29937 100644
--- a/drivers/input/touchscreen/intel-mid-touch.c
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -620,7 +620,7 @@
MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0);
err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq,
- 0, "mrstouch", tsdev);
+ IRQF_ONESHOT, "mrstouch", tsdev);
if (err) {
dev_err(tsdev->dev, "unable to allocate irq\n");
goto err_free_mem;
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 72f6ba3..953b4c1 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -165,7 +165,7 @@
input_set_drvdata(input, tsdata);
error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr,
- IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
client->name, tsdata);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c
index 7e74880..368d2c6c 100644
--- a/drivers/input/touchscreen/tnetv107x-ts.c
+++ b/drivers/input/touchscreen/tnetv107x-ts.c
@@ -297,7 +297,7 @@
goto error_clk;
}
- error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, 0,
+ error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, IRQF_ONESHOT,
dev_name(dev), ts);
if (error < 0) {
dev_err(ts->dev, "Could not allocate ts irq\n");
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index b6adeae..5ce3fa8 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -650,7 +650,8 @@
tsc2005_stop_scan(ts);
error = request_threaded_irq(spi->irq, NULL, tsc2005_irq_thread,
- IRQF_TRIGGER_RISING, "tsc2005", ts);
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "tsc2005", ts);
if (error) {
dev_err(&spi->dev, "Failed to request irq, err: %d\n", error);
goto err_free_mem;
diff --git a/drivers/leds/ledtrig-heartbeat.c b/drivers/leds/ledtrig-heartbeat.c
index 41dc76d..a019fbb 100644
--- a/drivers/leds/ledtrig-heartbeat.c
+++ b/drivers/leds/ledtrig-heartbeat.c
@@ -21,6 +21,8 @@
#include <linux/reboot.h>
#include "leds.h"
+static int panic_heartbeats;
+
struct heartbeat_trig_data {
unsigned int phase;
unsigned int period;
@@ -34,6 +36,11 @@
unsigned long brightness = LED_OFF;
unsigned long delay = 0;
+ if (unlikely(panic_heartbeats)) {
+ led_set_brightness(led_cdev, LED_OFF);
+ return;
+ }
+
/* acts like an actual heart beat -- ie thump-thump-pause... */
switch (heartbeat_data->phase) {
case 0:
@@ -111,12 +118,19 @@
return NOTIFY_DONE;
}
+static int heartbeat_panic_notifier(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ panic_heartbeats = 1;
+ return NOTIFY_DONE;
+}
+
static struct notifier_block heartbeat_reboot_nb = {
.notifier_call = heartbeat_reboot_notifier,
};
static struct notifier_block heartbeat_panic_nb = {
- .notifier_call = heartbeat_reboot_notifier,
+ .notifier_call = heartbeat_panic_notifier,
};
static int __init heartbeat_trig_init(void)
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 37fdaf8..ce59824 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -2292,6 +2292,13 @@
if (r)
return r;
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ return r;
+ }
+
r = dm_pool_reserve_metadata_snap(pool->pmd);
if (r)
DMWARN("reserve_metadata_snap message failed.");
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 1c2f904..a4c219e 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5784,8 +5784,7 @@
super_types[mddev->major_version].
validate_super(mddev, rdev);
if ((info->state & (1<<MD_DISK_SYNC)) &&
- (!test_bit(In_sync, &rdev->flags) ||
- rdev->raid_disk != info->raid_disk)) {
+ rdev->raid_disk != info->raid_disk) {
/* This was a hot-add request, but events doesn't
* match, so reject it.
*/
@@ -6751,7 +6750,7 @@
thread->tsk = kthread_run(md_thread, thread,
"%s_%s",
mdname(thread->mddev),
- name ?: mddev->pers->name);
+ name);
if (IS_ERR(thread->tsk)) {
kfree(thread);
return NULL;
@@ -7298,6 +7297,7 @@
int skipped = 0;
struct md_rdev *rdev;
char *desc;
+ struct blk_plug plug;
/* just incase thread restarts... */
if (test_bit(MD_RECOVERY_DONE, &mddev->recovery))
@@ -7447,6 +7447,7 @@
}
mddev->curr_resync_completed = j;
+ blk_start_plug(&plug);
while (j < max_sectors) {
sector_t sectors;
@@ -7552,6 +7553,7 @@
* this also signals 'finished resyncing' to md_stop
*/
out:
+ blk_finish_plug(&plug);
wait_event(mddev->recovery_wait, !atomic_read(&mddev->recovery_active));
/* tell personality that we are finished */
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 9339e67..61a1833 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -474,7 +474,8 @@
}
{
- mddev->thread = md_register_thread(multipathd, mddev, NULL);
+ mddev->thread = md_register_thread(multipathd, mddev,
+ "multipath");
if (!mddev->thread) {
printk(KERN_ERR "multipath: couldn't allocate thread"
" for %s\n", mdname(mddev));
diff --git a/drivers/md/persistent-data/dm-space-map-checker.c b/drivers/md/persistent-data/dm-space-map-checker.c
index 50ed53b..fc90c11 100644
--- a/drivers/md/persistent-data/dm-space-map-checker.c
+++ b/drivers/md/persistent-data/dm-space-map-checker.c
@@ -8,6 +8,7 @@
#include <linux/device-mapper.h>
#include <linux/export.h>
+#include <linux/vmalloc.h>
#ifdef CONFIG_DM_DEBUG_SPACE_MAPS
@@ -89,13 +90,23 @@
ca->nr = nr_blocks;
ca->nr_free = nr_blocks;
- ca->counts = kzalloc(sizeof(*ca->counts) * nr_blocks, GFP_KERNEL);
- if (!ca->counts)
- return -ENOMEM;
+
+ if (!nr_blocks)
+ ca->counts = NULL;
+ else {
+ ca->counts = vzalloc(sizeof(*ca->counts) * nr_blocks);
+ if (!ca->counts)
+ return -ENOMEM;
+ }
return 0;
}
+static void ca_destroy(struct count_array *ca)
+{
+ vfree(ca->counts);
+}
+
static int ca_load(struct count_array *ca, struct dm_space_map *sm)
{
int r;
@@ -126,12 +137,14 @@
static int ca_extend(struct count_array *ca, dm_block_t extra_blocks)
{
dm_block_t nr_blocks = ca->nr + extra_blocks;
- uint32_t *counts = kzalloc(sizeof(*counts) * nr_blocks, GFP_KERNEL);
+ uint32_t *counts = vzalloc(sizeof(*counts) * nr_blocks);
if (!counts)
return -ENOMEM;
- memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
- kfree(ca->counts);
+ if (ca->counts) {
+ memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
+ ca_destroy(ca);
+ }
ca->nr = nr_blocks;
ca->nr_free += extra_blocks;
ca->counts = counts;
@@ -151,11 +164,6 @@
return 0;
}
-static void ca_destroy(struct count_array *ca)
-{
- kfree(ca->counts);
-}
-
/*----------------------------------------------------------------*/
struct sm_checker {
@@ -343,25 +351,25 @@
int r;
struct sm_checker *smc;
- if (!sm)
- return NULL;
+ if (IS_ERR_OR_NULL(sm))
+ return ERR_PTR(-EINVAL);
smc = kmalloc(sizeof(*smc), GFP_KERNEL);
if (!smc)
- return NULL;
+ return ERR_PTR(-ENOMEM);
memcpy(&smc->sm, &ops_, sizeof(smc->sm));
r = ca_create(&smc->old_counts, sm);
if (r) {
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_create(&smc->counts, sm);
if (r) {
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
smc->real_sm = sm;
@@ -371,7 +379,7 @@
ca_destroy(&smc->counts);
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_commit(&smc->old_counts, &smc->counts);
@@ -379,7 +387,7 @@
ca_destroy(&smc->counts);
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
return &smc->sm;
@@ -391,25 +399,25 @@
int r;
struct sm_checker *smc;
- if (!sm)
- return NULL;
+ if (IS_ERR_OR_NULL(sm))
+ return ERR_PTR(-EINVAL);
smc = kmalloc(sizeof(*smc), GFP_KERNEL);
if (!smc)
- return NULL;
+ return ERR_PTR(-ENOMEM);
memcpy(&smc->sm, &ops_, sizeof(smc->sm));
r = ca_create(&smc->old_counts, sm);
if (r) {
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
r = ca_create(&smc->counts, sm);
if (r) {
ca_destroy(&smc->old_counts);
kfree(smc);
- return NULL;
+ return ERR_PTR(r);
}
smc->real_sm = sm;
diff --git a/drivers/md/persistent-data/dm-space-map-disk.c b/drivers/md/persistent-data/dm-space-map-disk.c
index fc469ba..3d0ed53 100644
--- a/drivers/md/persistent-data/dm-space-map-disk.c
+++ b/drivers/md/persistent-data/dm-space-map-disk.c
@@ -290,7 +290,16 @@
dm_block_t nr_blocks)
{
struct dm_space_map *sm = dm_sm_disk_create_real(tm, nr_blocks);
- return dm_sm_checker_create_fresh(sm);
+ struct dm_space_map *smc;
+
+ if (IS_ERR_OR_NULL(sm))
+ return sm;
+
+ smc = dm_sm_checker_create_fresh(sm);
+ if (IS_ERR(smc))
+ dm_sm_destroy(sm);
+
+ return smc;
}
EXPORT_SYMBOL_GPL(dm_sm_disk_create);
diff --git a/drivers/md/persistent-data/dm-transaction-manager.c b/drivers/md/persistent-data/dm-transaction-manager.c
index 400fe14..e5604b3 100644
--- a/drivers/md/persistent-data/dm-transaction-manager.c
+++ b/drivers/md/persistent-data/dm-transaction-manager.c
@@ -138,6 +138,9 @@
void dm_tm_destroy(struct dm_transaction_manager *tm)
{
+ if (!tm->is_clone)
+ wipe_shadow_table(tm);
+
kfree(tm);
}
EXPORT_SYMBOL_GPL(dm_tm_destroy);
@@ -344,8 +347,10 @@
}
*sm = dm_sm_checker_create(inner);
- if (!*sm)
+ if (IS_ERR(*sm)) {
+ r = PTR_ERR(*sm);
goto bad2;
+ }
} else {
r = dm_bm_write_lock(dm_tm_get_bm(*tm), sb_location,
@@ -364,8 +369,10 @@
}
*sm = dm_sm_checker_create(inner);
- if (!*sm)
+ if (IS_ERR(*sm)) {
+ r = PTR_ERR(*sm);
goto bad2;
+ }
}
return 0;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index a9c7981..8c2754f 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -517,8 +517,8 @@
int bad_sectors;
int disk = start_disk + i;
- if (disk >= conf->raid_disks)
- disk -= conf->raid_disks;
+ if (disk >= conf->raid_disks * 2)
+ disk -= conf->raid_disks * 2;
rdev = rcu_dereference(conf->mirrors[disk].rdev);
if (r1_bio->bios[disk] == IO_BLOCKED
@@ -883,7 +883,6 @@
const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
struct md_rdev *blocked_rdev;
- int plugged;
int first_clone;
int sectors_handled;
int max_sectors;
@@ -1034,7 +1033,6 @@
* the bad blocks. Each set of writes gets it's own r1bio
* with a set of bios attached.
*/
- plugged = mddev_check_plugged(mddev);
disks = conf->raid_disks * 2;
retry_write:
@@ -1191,6 +1189,8 @@
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
}
/* Mustn't call r1_bio_write_done before this next test,
* as it could result in the bio being freed.
@@ -1213,9 +1213,6 @@
/* In case raid1d snuck in to freeze_array */
wake_up(&conf->wait_barrier);
-
- if (do_sync || !bitmap || !plugged)
- md_wakeup_thread(mddev->thread);
}
static void status(struct seq_file *seq, struct mddev *mddev)
@@ -2621,7 +2618,7 @@
goto abort;
}
err = -ENOMEM;
- conf->thread = md_register_thread(raid1d, mddev, NULL);
+ conf->thread = md_register_thread(raid1d, mddev, "raid1");
if (!conf->thread) {
printk(KERN_ERR
"md/raid1:%s: couldn't allocate thread\n",
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 99ae606..8da6282 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1039,7 +1039,6 @@
const unsigned long do_fua = (bio->bi_rw & REQ_FUA);
unsigned long flags;
struct md_rdev *blocked_rdev;
- int plugged;
int sectors_handled;
int max_sectors;
int sectors;
@@ -1239,7 +1238,6 @@
* of r10_bios is recored in bio->bi_phys_segments just as with
* the read case.
*/
- plugged = mddev_check_plugged(mddev);
r10_bio->read_slot = -1; /* make sure repl_bio gets freed */
raid10_find_phys(conf, r10_bio);
@@ -1396,6 +1394,8 @@
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
if (!r10_bio->devs[i].repl_bio)
continue;
@@ -1423,6 +1423,8 @@
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
}
/* Don't remove the bias on 'remaining' (one_write_done) until
@@ -1448,9 +1450,6 @@
/* In case raid10d snuck in to freeze_array */
wake_up(&conf->wait_barrier);
-
- if (do_sync || !mddev->bitmap || !plugged)
- md_wakeup_thread(mddev->thread);
}
static void status(struct seq_file *seq, struct mddev *mddev)
@@ -2310,7 +2309,7 @@
if (r10_sync_page_io(rdev,
r10_bio->devs[sl].addr +
sect,
- s<<9, conf->tmppage, WRITE)
+ s, conf->tmppage, WRITE)
== 0) {
/* Well, this device is dead */
printk(KERN_NOTICE
@@ -2349,7 +2348,7 @@
switch (r10_sync_page_io(rdev,
r10_bio->devs[sl].addr +
sect,
- s<<9, conf->tmppage,
+ s, conf->tmppage,
READ)) {
case 0:
/* Well, this device is dead */
@@ -2512,7 +2511,7 @@
slot = r10_bio->read_slot;
printk_ratelimited(
KERN_ERR
- "md/raid10:%s: %s: redirecting"
+ "md/raid10:%s: %s: redirecting "
"sector %llu to another mirror\n",
mdname(mddev),
bdevname(rdev->bdev, b),
@@ -2661,7 +2660,8 @@
blk_start_plug(&plug);
for (;;) {
- flush_pending_writes(conf);
+ if (atomic_read(&mddev->plug_cnt) == 0)
+ flush_pending_writes(conf);
spin_lock_irqsave(&conf->device_lock, flags);
if (list_empty(head)) {
@@ -2890,6 +2890,12 @@
/* want to reconstruct this device */
rb2 = r10_bio;
sect = raid10_find_virt(conf, sector_nr, i);
+ if (sect >= mddev->resync_max_sectors) {
+ /* last stripe is not complete - don't
+ * try to recover this sector.
+ */
+ continue;
+ }
/* Unless we are doing a full sync, or a replacement
* we only need to recover the block if it is set in
* the bitmap
@@ -3421,7 +3427,7 @@
spin_lock_init(&conf->resync_lock);
init_waitqueue_head(&conf->wait_barrier);
- conf->thread = md_register_thread(raid10d, mddev, NULL);
+ conf->thread = md_register_thread(raid10d, mddev, "raid10");
if (!conf->thread)
goto out;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index d267672..04348d7 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -196,12 +196,14 @@
BUG_ON(!list_empty(&sh->lru));
BUG_ON(atomic_read(&conf->active_stripes)==0);
if (test_bit(STRIPE_HANDLE, &sh->state)) {
- if (test_bit(STRIPE_DELAYED, &sh->state))
+ if (test_bit(STRIPE_DELAYED, &sh->state) &&
+ !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
list_add_tail(&sh->lru, &conf->delayed_list);
else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
sh->bm_seq - conf->seq_write > 0)
list_add_tail(&sh->lru, &conf->bitmap_list);
else {
+ clear_bit(STRIPE_DELAYED, &sh->state);
clear_bit(STRIPE_BIT_DELAY, &sh->state);
list_add_tail(&sh->lru, &conf->handle_list);
}
@@ -606,6 +608,12 @@
* a chance*/
md_check_recovery(conf->mddev);
}
+ /*
+ * Because md_wait_for_blocked_rdev
+ * will dec nr_pending, we must
+ * increment it first.
+ */
+ atomic_inc(&rdev->nr_pending);
md_wait_for_blocked_rdev(rdev, conf->mddev);
} else {
/* Acknowledged bad block - skip the write */
@@ -1737,6 +1745,7 @@
} else {
const char *bdn = bdevname(rdev->bdev, b);
int retry = 0;
+ int set_bad = 0;
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
@@ -1748,7 +1757,8 @@
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (conf->mddev->degraded >= conf->max_degraded)
+ else if (conf->mddev->degraded >= conf->max_degraded) {
+ set_bad = 1;
printk_ratelimited(
KERN_WARNING
"md/raid:%s: read error not correctable "
@@ -1756,8 +1766,9 @@
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
+ } else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) {
/* Oh, no!!! */
+ set_bad = 1;
printk_ratelimited(
KERN_WARNING
"md/raid:%s: read error NOT corrected!! "
@@ -1765,7 +1776,7 @@
mdname(conf->mddev),
(unsigned long long)s,
bdn);
- else if (atomic_read(&rdev->read_errors)
+ } else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING
"md/raid:%s: Too many read errors, failing device %s.\n",
@@ -1777,7 +1788,11 @@
else {
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
- md_error(conf->mddev, rdev);
+ if (!(set_bad
+ && test_bit(In_sync, &rdev->flags)
+ && rdev_set_badblocks(
+ rdev, sh->sector, STRIPE_SECTORS, 0)))
+ md_error(conf->mddev, rdev);
}
}
rdev_dec_pending(rdev, conf->mddev);
@@ -3582,8 +3597,18 @@
finish:
/* wait for this device to become unblocked */
- if (conf->mddev->external && unlikely(s.blocked_rdev))
- md_wait_for_blocked_rdev(s.blocked_rdev, conf->mddev);
+ if (unlikely(s.blocked_rdev)) {
+ if (conf->mddev->external)
+ md_wait_for_blocked_rdev(s.blocked_rdev,
+ conf->mddev);
+ else
+ /* Internal metadata will immediately
+ * be written by raid5d, so we don't
+ * need to wait here.
+ */
+ rdev_dec_pending(s.blocked_rdev,
+ conf->mddev);
+ }
if (s.handle_bad_blocks)
for (i = disks; i--; ) {
@@ -3881,8 +3906,6 @@
raid_bio->bi_next = (void*)rdev;
align_bi->bi_bdev = rdev->bdev;
align_bi->bi_flags &= ~(1 << BIO_SEG_VALID);
- /* No reshape active, so we can trust rdev->data_offset */
- align_bi->bi_sector += rdev->data_offset;
if (!bio_fits_rdev(align_bi) ||
is_badblock(rdev, align_bi->bi_sector, align_bi->bi_size>>9,
@@ -3893,6 +3916,9 @@
return 0;
}
+ /* No reshape active, so we can trust rdev->data_offset */
+ align_bi->bi_sector += rdev->data_offset;
+
spin_lock_irq(&conf->device_lock);
wait_event_lock_irq(conf->wait_for_stripe,
conf->quiesce == 0,
@@ -3971,7 +3997,6 @@
struct stripe_head *sh;
const int rw = bio_data_dir(bi);
int remaining;
- int plugged;
if (unlikely(bi->bi_rw & REQ_FLUSH)) {
md_flush_request(mddev, bi);
@@ -3990,7 +4015,6 @@
bi->bi_next = NULL;
bi->bi_phys_segments = 1; /* over-loaded to count active stripes */
- plugged = mddev_check_plugged(mddev);
for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) {
DEFINE_WAIT(w);
int previous;
@@ -4092,6 +4116,7 @@
if ((bi->bi_rw & REQ_SYNC) &&
!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
atomic_inc(&conf->preread_active_stripes);
+ mddev_check_plugged(mddev);
release_stripe(sh);
} else {
/* cannot get stripe for read-ahead, just give-up */
@@ -4099,10 +4124,7 @@
finish_wait(&conf->wait_for_overlap, &w);
break;
}
-
}
- if (!plugged)
- md_wakeup_thread(mddev->thread);
spin_lock_irq(&conf->device_lock);
remaining = raid5_dec_bi_phys_segments(bi);
@@ -4823,6 +4845,7 @@
int raid_disk, memory, max_disks;
struct md_rdev *rdev;
struct disk_info *disk;
+ char pers_name[6];
if (mddev->new_level != 5
&& mddev->new_level != 4
@@ -4946,7 +4969,8 @@
printk(KERN_INFO "md/raid:%s: allocated %dkB\n",
mdname(mddev), memory);
- conf->thread = md_register_thread(raid5d, mddev, NULL);
+ sprintf(pers_name, "raid%d", mddev->new_level);
+ conf->thread = md_register_thread(raid5d, mddev, pers_name);
if (!conf->thread) {
printk(KERN_ERR
"md/raid:%s: couldn't allocate thread.\n",
@@ -5465,10 +5489,9 @@
if (rdev->saved_raid_disk >= 0 &&
rdev->saved_raid_disk >= first &&
conf->disks[rdev->saved_raid_disk].rdev == NULL)
- disk = rdev->saved_raid_disk;
- else
- disk = first;
- for ( ; disk <= last ; disk++) {
+ first = rdev->saved_raid_disk;
+
+ for (disk = first; disk <= last; disk++) {
p = conf->disks + disk;
if (p->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
@@ -5477,8 +5500,11 @@
if (rdev->saved_raid_disk != disk)
conf->fullsync = 1;
rcu_assign_pointer(p->rdev, rdev);
- break;
+ goto out;
}
+ }
+ for (disk = first; disk <= last; disk++) {
+ p = conf->disks + disk;
if (test_bit(WantReplacement, &p->rdev->flags) &&
p->replacement == NULL) {
clear_bit(In_sync, &rdev->flags);
@@ -5490,6 +5516,7 @@
break;
}
}
+out:
print_raid5_conf(conf);
return err;
}
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index b38d8a7..6e5338a 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -223,6 +223,7 @@
{
struct tegra_sdhci_platform_data *plat;
struct device_node *np = pdev->dev.of_node;
+ u32 bus_width;
if (!np)
return NULL;
@@ -236,7 +237,9 @@
plat->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0);
plat->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0);
plat->power_gpio = of_get_named_gpio(np, "power-gpios", 0);
- if (of_find_property(np, "support-8bit", NULL))
+
+ if (of_property_read_u32(np, "bus-width", &bus_width) == 0 &&
+ bus_width == 8)
plat->is_8bit = 1;
return plat;
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 41371ba1..f3f6cfed 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -102,7 +102,7 @@
static int cafe_device_ready(struct mtd_info *mtd)
{
struct cafe_priv *cafe = mtd->priv;
- int result = !!(cafe_readl(cafe, NAND_STATUS) | 0x40000000);
+ int result = !!(cafe_readl(cafe, NAND_STATUS) & 0x40000000);
uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
cafe_writel(cafe, irqs, NAND_IRQ);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index d47586c..a11253a0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3501,6 +3501,13 @@
/* propagate ecc info to mtd_info */
mtd->ecclayout = chip->ecc.layout;
mtd->ecc_strength = chip->ecc.strength;
+ /*
+ * Initialize bitflip_threshold to its default prior scan_bbt() call.
+ * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
+ * properly set.
+ */
+ if (!mtd->bitflip_threshold)
+ mtd->bitflip_threshold = mtd->ecc_strength;
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 0741ade..f2db8fc 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1804,18 +1804,16 @@
if (priv->mode == MQ_MG_MODE) {
baddr = ®s->txic0;
for_each_set_bit(i, &tx_mask, priv->num_tx_queues) {
- if (likely(priv->tx_queue[i]->txcoalescing)) {
- gfar_write(baddr + i, 0);
+ gfar_write(baddr + i, 0);
+ if (likely(priv->tx_queue[i]->txcoalescing))
gfar_write(baddr + i, priv->tx_queue[i]->txic);
- }
}
baddr = ®s->rxic0;
for_each_set_bit(i, &rx_mask, priv->num_rx_queues) {
- if (likely(priv->rx_queue[i]->rxcoalescing)) {
- gfar_write(baddr + i, 0);
+ gfar_write(baddr + i, 0);
+ if (likely(priv->rx_queue[i]->rxcoalescing))
gfar_write(baddr + i, priv->rx_queue[i]->rxic);
- }
}
}
}
diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 351a409..76edbc1 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -103,6 +103,7 @@
#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 31d37a2..623e30b 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -496,7 +496,7 @@
* @sk_buff: socket buffer with received data
**/
static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
- __le16 csum, struct sk_buff *skb)
+ struct sk_buff *skb)
{
u16 status = (u16)status_err;
u8 errors = (u8)(status_err >> 24);
@@ -511,8 +511,8 @@
if (status & E1000_RXD_STAT_IXSM)
return;
- /* TCP/UDP checksum error bit is set */
- if (errors & E1000_RXD_ERR_TCPE) {
+ /* TCP/UDP checksum error bit or IP checksum error bit is set */
+ if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) {
/* let the stack verify checksum errors */
adapter->hw_csum_err++;
return;
@@ -523,19 +523,7 @@
return;
/* It must be a TCP or UDP packet with a valid checksum */
- if (status & E1000_RXD_STAT_TCPCS) {
- /* TCP checksum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- } else {
- /*
- * IP fragment with UDP payload
- * Hardware complements the payload checksum, so we undo it
- * and then put the value in host order for further stack use.
- */
- __sum16 sum = (__force __sum16)swab16((__force u16)csum);
- skb->csum = csum_unfold(~sum);
- skb->ip_summed = CHECKSUM_COMPLETE;
- }
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
adapter->hw_csum_good++;
}
@@ -954,8 +942,7 @@
skb_put(skb, length);
/* Receive Checksum Offload */
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
@@ -1341,8 +1328,7 @@
total_rx_bytes += skb->len;
total_rx_packets++;
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
@@ -1512,9 +1498,8 @@
}
}
- /* Receive Checksum Offload XXX recompute due to CRC strip? */
- e1000_rx_checksum(adapter, staterr,
- rx_desc->wb.lower.hi_dword.csum_ip.csum, skb);
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter, staterr, skb);
e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
@@ -3098,19 +3083,10 @@
/* Enable Receive Checksum Offload for TCP and UDP */
rxcsum = er32(RXCSUM);
- if (adapter->netdev->features & NETIF_F_RXCSUM) {
+ if (adapter->netdev->features & NETIF_F_RXCSUM)
rxcsum |= E1000_RXCSUM_TUOFL;
-
- /*
- * IPv4 payload checksum for UDP fragments must be
- * used in conjunction with packet-split.
- */
- if (adapter->rx_ps_pages)
- rxcsum |= E1000_RXCSUM_IPPCSE;
- } else {
+ else
rxcsum &= ~E1000_RXCSUM_TUOFL;
- /* no need to clear IPPCSE as it defaults to 0 */
- }
ew32(RXCSUM, rxcsum);
if (adapter->hw.mac.type == e1000_pch2lan) {
@@ -5241,22 +5217,10 @@
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
/* Jumbo frame support */
- if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
- if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
- e_err("Jumbo Frames not supported.\n");
- return -EINVAL;
- }
-
- /*
- * IP payload checksum (enabled with jumbos/packet-split when
- * Rx checksum is enabled) and generation of RSS hash is
- * mutually exclusive in the hardware.
- */
- if ((netdev->features & NETIF_F_RXCSUM) &&
- (netdev->features & NETIF_F_RXHASH)) {
- e_err("Jumbo frames cannot be enabled when both receive checksum offload and receive hashing are enabled. Disable one of the receive offload features before enabling jumbos.\n");
- return -EINVAL;
- }
+ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+ e_err("Jumbo Frames not supported.\n");
+ return -EINVAL;
}
/* Supported frame sizes */
@@ -6030,17 +5994,6 @@
NETIF_F_RXALL)))
return 0;
- /*
- * IP payload checksum (enabled with jumbos/packet-split when Rx
- * checksum is enabled) and generation of RSS hash is mutually
- * exclusive in the hardware.
- */
- if (adapter->rx_ps_pages &&
- (features & NETIF_F_RXCSUM) && (features & NETIF_F_RXHASH)) {
- e_err("Enabling both receive checksum offload and receive hashing is not possible with jumbo frames. Disable jumbos or enable only one of the receive offload features.\n");
- return -EINVAL;
- }
-
if (changed & NETIF_F_RXFCS) {
if (features & NETIF_F_RXFCS) {
adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
diff --git a/drivers/net/ethernet/intel/igbvf/ethtool.c b/drivers/net/ethernet/intel/igbvf/ethtool.c
index 8ce6706..90eef07 100644
--- a/drivers/net/ethernet/intel/igbvf/ethtool.c
+++ b/drivers/net/ethernet/intel/igbvf/ethtool.c
@@ -357,21 +357,28 @@
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- if ((ec->rx_coalesce_usecs > IGBVF_MAX_ITR_USECS) ||
- ((ec->rx_coalesce_usecs > 3) &&
- (ec->rx_coalesce_usecs < IGBVF_MIN_ITR_USECS)) ||
- (ec->rx_coalesce_usecs == 2))
- return -EINVAL;
-
- /* convert to rate of irq's per second */
- if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) {
- adapter->current_itr = IGBVF_START_ITR;
- adapter->requested_itr = ec->rx_coalesce_usecs;
- } else {
+ if ((ec->rx_coalesce_usecs >= IGBVF_MIN_ITR_USECS) &&
+ (ec->rx_coalesce_usecs <= IGBVF_MAX_ITR_USECS)) {
adapter->current_itr = ec->rx_coalesce_usecs << 2;
adapter->requested_itr = 1000000000 /
(adapter->current_itr * 256);
- }
+ } else if ((ec->rx_coalesce_usecs == 3) ||
+ (ec->rx_coalesce_usecs == 2)) {
+ adapter->current_itr = IGBVF_START_ITR;
+ adapter->requested_itr = ec->rx_coalesce_usecs;
+ } else if (ec->rx_coalesce_usecs == 0) {
+ /*
+ * The user's desire is to turn off interrupt throttling
+ * altogether, but due to HW limitations, we can't do that.
+ * Instead we set a very small value in EITR, which would
+ * allow ~967k interrupts per second, but allow the adapter's
+ * internal clocking to still function properly.
+ */
+ adapter->current_itr = 4;
+ adapter->requested_itr = 1000000000 /
+ (adapter->current_itr * 256);
+ } else
+ return -EINVAL;
writel(adapter->current_itr,
hw->hw_addr + adapter->rx_ring->itr_register);
diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index d614c37..3b5c457 100644
--- a/drivers/net/ethernet/ti/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/dma-mapping.h>
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 3767a12..b01960f 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -197,6 +197,10 @@
static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
{
struct usbnet *dev = usb_get_intfdata(intf);
+
+ /* can be called while disconnecting */
+ if (!dev)
+ return 0;
return qmi_wwan_manage_power(dev, on);
}
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index c54b7d37..420d69b 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -143,6 +143,7 @@
u32 keymax;
DECLARE_BITMAP(keymap, ATH_KEYMAX);
DECLARE_BITMAP(tkip_keymap, ATH_KEYMAX);
+ DECLARE_BITMAP(ccmp_keymap, ATH_KEYMAX);
enum ath_crypt_caps crypt_caps;
unsigned int clockrate;
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 1c68e56..995ca8e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -622,7 +622,7 @@
if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_AUTO) {
if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI ||
- ((AR_SREV_9160(ah) || AR_SREV_9280(ah)) &&
+ ((AR_SREV_9160(ah) || AR_SREV_9280(ah) || AR_SREV_9287(ah)) &&
!ah->is_pciexpress)) {
ah->config.serialize_regmode =
SER_REG_MODE_ON;
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index e1fcc68..0735aeb 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -695,9 +695,9 @@
__skb_unlink(skb, &rx_edma->rx_fifo);
list_add_tail(&bf->list, &sc->rx.rxbuf);
ath_rx_edma_buf_link(sc, qtype);
- } else {
- bf = NULL;
}
+
+ bf = NULL;
}
*dest = bf;
@@ -822,7 +822,8 @@
* descriptor does contain a valid key index. This has been observed
* mostly with CCMP encryption.
*/
- if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
+ if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID ||
+ !test_bit(rx_stats->rs_keyix, common->ccmp_keymap))
rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
if (!rx_stats->rs_datalen) {
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index 0e81904..5c54aa4 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -556,6 +556,9 @@
return -EIO;
set_bit(idx, common->keymap);
+ if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
+ set_bit(idx, common->ccmp_keymap);
+
if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
set_bit(idx + 64, common->keymap);
set_bit(idx, common->tkip_keymap);
@@ -582,6 +585,7 @@
return;
clear_bit(key->hw_key_idx, common->keymap);
+ clear_bit(key->hw_key_idx, common->ccmp_keymap);
if (key->cipher != WLAN_CIPHER_SUITE_TKIP)
return;
diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
index 3ee23134..0136803 100644
--- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c
+++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c
@@ -796,6 +796,18 @@
switch (op) {
case ADD:
ret = iwlagn_mac_sta_add(hw, vif, sta);
+ if (ret)
+ break;
+ /*
+ * Clear the in-progress flag, the AP station entry was added
+ * but we'll initialize LQ only when we've associated (which
+ * would also clear the in-progress flag). This is necessary
+ * in case we never initialize LQ because association fails.
+ */
+ spin_lock_bh(&priv->sta_lock);
+ priv->stations[iwl_sta_id(sta)].used &=
+ ~IWL_STA_UCODE_INPROGRESS;
+ spin_unlock_bh(&priv->sta_lock);
break;
case REMOVE:
ret = iwlagn_mac_sta_remove(hw, vif, sta);
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index 9c44088..900ee12 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -256,7 +256,8 @@
else
last_seq = priv->rx_seq[tid];
- if (last_seq >= new_node->start_win)
+ if (last_seq != MWIFIEX_DEF_11N_RX_SEQ_NUM &&
+ last_seq >= new_node->start_win)
new_node->start_win = last_seq + 1;
new_node->win_size = win_size;
@@ -596,5 +597,5 @@
spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr);
- memset(priv->rx_seq, 0, sizeof(priv->rx_seq));
+ mwifiex_reset_11n_rx_seq_num(priv);
}
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.h b/drivers/net/wireless/mwifiex/11n_rxreorder.h
index f1bffeb..6c9815a 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.h
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.h
@@ -37,6 +37,13 @@
#define ADDBA_RSP_STATUS_ACCEPT 0
+#define MWIFIEX_DEF_11N_RX_SEQ_NUM 0xffff
+
+static inline void mwifiex_reset_11n_rx_seq_num(struct mwifiex_private *priv)
+{
+ memset(priv->rx_seq, 0xff, sizeof(priv->rx_seq));
+}
+
int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *,
u16 seqNum,
u16 tid, u8 *ta,
diff --git a/drivers/net/wireless/mwifiex/ie.c b/drivers/net/wireless/mwifiex/ie.c
index ceb82cd..383820a 100644
--- a/drivers/net/wireless/mwifiex/ie.c
+++ b/drivers/net/wireless/mwifiex/ie.c
@@ -213,6 +213,7 @@
/* save assoc resp ie index after auto-indexing */
*assoc_idx = *((u16 *)pos);
+ kfree(ap_custom_ie);
return ret;
}
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index e037747..fc8a9bf 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -978,10 +978,10 @@
dev_dbg(adapter->dev, "info: --- Rx: Event ---\n");
adapter->event_cause = *(u32 *) skb->data;
- skb_pull(skb, MWIFIEX_EVENT_HEADER_LEN);
-
if ((skb->len > 0) && (skb->len < MAX_EVENT_SIZE))
- memcpy(adapter->event_body, skb->data, skb->len);
+ memcpy(adapter->event_body,
+ skb->data + MWIFIEX_EVENT_HEADER_LEN,
+ skb->len);
/* event cause has been saved to adapter->event_cause */
adapter->event_received = true;
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index 4ace5a3..11e731f 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -406,9 +406,9 @@
break;
case EVENT_UAP_STA_ASSOC:
- skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
memset(&sinfo, 0, sizeof(sinfo));
- event = (struct mwifiex_assoc_event *)adapter->event_skb->data;
+ event = (struct mwifiex_assoc_event *)
+ (adapter->event_body + MWIFIEX_UAP_EVENT_EXTRA_HEADER);
if (le16_to_cpu(event->type) == TLV_TYPE_UAP_MGMT_FRAME) {
len = -1;
@@ -433,9 +433,8 @@
GFP_KERNEL);
break;
case EVENT_UAP_STA_DEAUTH:
- skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
- cfg80211_del_sta(priv->netdev, adapter->event_skb->data,
- GFP_KERNEL);
+ cfg80211_del_sta(priv->netdev, adapter->event_body +
+ MWIFIEX_UAP_EVENT_EXTRA_HEADER, GFP_KERNEL);
break;
case EVENT_UAP_BSS_IDLE:
priv->media_connected = false;
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index 49ebf20..22a5916 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -49,6 +49,7 @@
struct device *dev = adapter->dev;
u32 recv_type;
__le32 tmp;
+ int ret;
if (adapter->hs_activated)
mwifiex_process_hs_config(adapter);
@@ -69,16 +70,19 @@
case MWIFIEX_USB_TYPE_CMD:
if (skb->len > MWIFIEX_SIZE_OF_CMD_BUFFER) {
dev_err(dev, "CMD: skb->len too large\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
} else if (!adapter->curr_cmd) {
dev_dbg(dev, "CMD: no curr_cmd\n");
if (adapter->ps_state == PS_STATE_SLEEP_CFM) {
mwifiex_process_sleep_confirm_resp(
adapter, skb->data,
skb->len);
- return 0;
+ ret = 0;
+ goto exit_restore_skb;
}
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
adapter->curr_cmd->resp_skb = skb;
@@ -87,20 +91,22 @@
case MWIFIEX_USB_TYPE_EVENT:
if (skb->len < sizeof(u32)) {
dev_err(dev, "EVENT: skb->len too small\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
skb_copy_from_linear_data(skb, &tmp, sizeof(u32));
adapter->event_cause = le32_to_cpu(tmp);
- skb_pull(skb, sizeof(u32));
dev_dbg(dev, "event_cause %#x\n", adapter->event_cause);
if (skb->len > MAX_EVENT_SIZE) {
dev_err(dev, "EVENT: event body too large\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
- skb_copy_from_linear_data(skb, adapter->event_body,
- skb->len);
+ memcpy(adapter->event_body, skb->data +
+ MWIFIEX_EVENT_HEADER_LEN, skb->len);
+
adapter->event_received = true;
adapter->event_skb = skb;
break;
@@ -124,6 +130,12 @@
}
return -EINPROGRESS;
+
+exit_restore_skb:
+ /* The buffer will be reused for further cmds/events */
+ skb_push(skb, INTF_HEADER_LEN);
+
+ return ret;
}
static void mwifiex_usb_rx_complete(struct urb *urb)
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index f3fc655..3fa4d41 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -404,6 +404,8 @@
priv->add_ba_param.tx_win_size = MWIFIEX_AMPDU_DEF_TXWINSIZE;
priv->add_ba_param.rx_win_size = MWIFIEX_AMPDU_DEF_RXWINSIZE;
+ mwifiex_reset_11n_rx_seq_num(priv);
+
atomic_set(&priv->wmm.tx_pkts_queued, 0);
atomic_set(&priv->wmm.highest_queued_prio, HIGH_PRIO_TID);
}
@@ -1221,6 +1223,7 @@
if (!ptr->is_11n_enabled ||
mwifiex_is_ba_stream_setup(priv, ptr, tid) ||
+ priv->wps.session_enable ||
((priv->sec_info.wpa_enabled ||
priv->sec_info.wpa2_enabled) &&
!priv->wpa_is_gtk_set)) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index d228358..9970c2b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -301,9 +301,11 @@
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
+ {RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
+ {RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
/* HP - Lite-On ,8188CUS Slim Combo */
{RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)},
{RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */
@@ -346,6 +348,7 @@
{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/
{RTL_USB_DEVICE(0x0b05, 0x17ab, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
+ {RTL_USB_DEVICE(0x0bda, 0x8186, rtl92cu_hal_cfg)}, /*Realtek 92CE-VAU*/
{RTL_USB_DEVICE(0x0df6, 0x0061, rtl92cu_hal_cfg)}, /*Sitecom-Edimax*/
{RTL_USB_DEVICE(0x0e66, 0x0019, rtl92cu_hal_cfg)}, /*Hawking-Edimax*/
{RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig
index 54156b0..d7b907e 100644
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
@@ -1,7 +1,6 @@
config WLCORE
tristate "TI wlcore support"
depends on WL_TI && GENERIC_HARDIRQS && MAC80211
- depends on INET
select FW_LOADER
---help---
This module contains the main code for TI WLAN chips. It abstracts
diff --git a/drivers/of/base.c b/drivers/of/base.c
index d9bfd49..eada3f4 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -511,6 +511,22 @@
}
EXPORT_SYMBOL(of_find_node_with_property);
+static const struct of_device_id *of_match_compat(const struct of_device_id *matches,
+ const char *compat)
+{
+ while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
+ const char *cp = matches->compatible;
+ int len = strlen(cp);
+
+ if (len > 0 && of_compat_cmp(compat, cp, len) == 0)
+ return matches;
+
+ matches++;
+ }
+
+ return NULL;
+}
+
/**
* of_match_node - Tell if an device_node has a matching of_match structure
* @matches: array of of device match structures to search in
@@ -521,9 +537,18 @@
const struct of_device_id *of_match_node(const struct of_device_id *matches,
const struct device_node *node)
{
+ struct property *prop;
+ const char *cp;
+
if (!matches)
return NULL;
+ of_property_for_each_string(node, "compatible", prop, cp) {
+ const struct of_device_id *match = of_match_compat(matches, cp);
+ if (match)
+ return match;
+ }
+
while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
int match = 1;
if (matches->name[0])
@@ -532,10 +557,7 @@
if (matches->type[0])
match &= node->type
&& !strcmp(matches->type, node->type);
- if (matches->compatible[0])
- match &= of_device_is_compatible(node,
- matches->compatible);
- if (match)
+ if (match && !matches->compatible[0])
return matches;
matches++;
}
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 343ad29..3132ea0 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -462,4 +462,5 @@
of_node_put(root);
return rc;
}
+EXPORT_SYMBOL_GPL(of_platform_populate);
#endif /* CONFIG_OF_ADDRESS */
diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
index 1028786..739ef556 100644
--- a/drivers/rtc/rtc-stmp3xxx.c
+++ b/drivers/rtc/rtc-stmp3xxx.c
@@ -25,6 +25,7 @@
#include <linux/interrupt.h>
#include <linux/rtc.h>
#include <linux/slab.h>
+#include <linux/of_device.h>
#include <mach/common.h>
@@ -265,6 +266,12 @@
#define stmp3xxx_rtc_resume NULL
#endif
+static const struct of_device_id rtc_dt_ids[] = {
+ { .compatible = "fsl,stmp3xxx-rtc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rtc_dt_ids);
+
static struct platform_driver stmp3xxx_rtcdrv = {
.probe = stmp3xxx_rtc_probe,
.remove = stmp3xxx_rtc_remove,
@@ -273,6 +280,7 @@
.driver = {
.name = "stmp3xxx-rtc",
.owner = THIS_MODULE,
+ .of_match_table = rtc_dt_ids,
},
};
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 6986552..77759c7 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -3960,7 +3960,7 @@
{
struct qla_hw_data *ha = vha->hw;
struct qla_tgt *tgt = ha->tgt.qla_tgt;
- int reason_code;
+ int login_code;
ql_dbg(ql_dbg_tgt, vha, 0xe039,
"scsi(%ld): ha state %d init_done %d oper_mode %d topo %d\n",
@@ -4003,9 +4003,9 @@
{
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03b,
"qla_target(%d): Async LOOP_UP occured "
- "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
if (tgt->link_reinit_iocb_pending) {
qlt_send_notify_ack(vha, (void *)&tgt->link_reinit_iocb,
0, 0, 0, 0, 0, 0);
@@ -4020,23 +4020,24 @@
case MBA_RSCN_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03c,
"qla_target(%d): Async event %#x occured "
- "(m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx, code,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx, code,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
break;
case MBA_PORT_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03d,
"qla_target(%d): Port update async event %#x "
- "occured: updating the ports database (m[1]=%x, m[2]=%x, "
- "m[3]=%x, m[4]=%x)", vha->vp_idx, code,
- le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
- reason_code = le16_to_cpu(mailbox[2]);
- if (reason_code == 0x4)
+ "occured: updating the ports database (m[0]=%x, m[1]=%x, "
+ "m[2]=%x, m[3]=%x)", vha->vp_idx, code,
+ le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
+
+ login_code = le16_to_cpu(mailbox[2]);
+ if (login_code == 0x4)
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03e,
"Async MB 2: Got PLOGI Complete\n");
- else if (reason_code == 0x7)
+ else if (login_code == 0x7)
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03f,
"Async MB 2: Port Logged Out\n");
break;
@@ -4044,9 +4045,9 @@
default:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf040,
"qla_target(%d): Async event %#x occured: "
- "ignore (m[1]=%x, m[2]=%x, m[3]=%x, m[4]=%x)", vha->vp_idx,
- code, le16_to_cpu(mailbox[1]), le16_to_cpu(mailbox[2]),
- le16_to_cpu(mailbox[3]), le16_to_cpu(mailbox[4]));
+ "ignore (m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
+ code, le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
+ le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
break;
}
diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c
index cb99da9..87901fa 100644
--- a/drivers/target/tcm_fc/tfc_sess.c
+++ b/drivers/target/tcm_fc/tfc_sess.c
@@ -58,7 +58,8 @@
struct ft_tport *tport;
int i;
- tport = rcu_dereference(lport->prov[FC_TYPE_FCP]);
+ tport = rcu_dereference_protected(lport->prov[FC_TYPE_FCP],
+ lockdep_is_held(&ft_lport_lock));
if (tport && tport->tpg)
return tport;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index ec56d83..2e341b8 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -33,6 +33,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/of_device.h>
#include <asm/cacheflush.h>
@@ -675,6 +676,30 @@
#endif
};
+/*
+ * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it
+ * could successfully get all information from dt or a negative errno.
+ */
+static int serial_mxs_probe_dt(struct mxs_auart_port *s,
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ if (!np)
+ /* no device tree device */
+ return 1;
+
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
+ return ret;
+ }
+ s->port.line = ret;
+
+ return 0;
+}
+
static int __devinit mxs_auart_probe(struct platform_device *pdev)
{
struct mxs_auart_port *s;
@@ -689,6 +714,12 @@
goto out;
}
+ ret = serial_mxs_probe_dt(s, pdev);
+ if (ret > 0)
+ s->port.line = pdev->id < 0 ? 0 : pdev->id;
+ else if (ret < 0)
+ goto out_free;
+
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl)) {
ret = PTR_ERR(pinctrl);
@@ -711,7 +742,6 @@
s->port.membase = ioremap(r->start, resource_size(r));
s->port.ops = &mxs_auart_ops;
s->port.iotype = UPIO_MEM;
- s->port.line = pdev->id < 0 ? 0 : pdev->id;
s->port.fifosize = 16;
s->port.uartclk = clk_get_rate(s->clk);
s->port.type = PORT_IMX;
@@ -728,7 +758,7 @@
platform_set_drvdata(pdev, s);
- auart_port[pdev->id] = s;
+ auart_port[s->port.line] = s;
mxs_auart_reset(&s->port);
@@ -769,12 +799,19 @@
return 0;
}
+static struct of_device_id mxs_auart_dt_ids[] = {
+ { .compatible = "fsl,imx23-auart", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
+
static struct platform_driver mxs_auart_driver = {
.probe = mxs_auart_probe,
.remove = __devexit_p(mxs_auart_remove),
.driver = {
.name = "mxs-auart",
.owner = THIS_MODULE,
+ .of_match_table = mxs_auart_dt_ids,
},
};
@@ -807,3 +844,4 @@
module_exit(mxs_auart_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Freescale MXS application uart driver");
+MODULE_ALIAS("platform:mxs-auart");
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index abbe691..49619b4 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -41,12 +41,14 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/pinctrl/consumer.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
#define REG_SET 4
#define REG_CLR 8
@@ -750,16 +752,43 @@
}
}
+static struct platform_device_id mxsfb_devtype[] = {
+ {
+ .name = "imx23-fb",
+ .driver_data = MXSFB_V3,
+ }, {
+ .name = "imx28-fb",
+ .driver_data = MXSFB_V4,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
+
+static const struct of_device_id mxsfb_dt_ids[] = {
+ { .compatible = "fsl,imx23-lcdif", .data = &mxsfb_devtype[0], },
+ { .compatible = "fsl,imx28-lcdif", .data = &mxsfb_devtype[1], },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxsfb_dt_ids);
+
static int __devinit mxsfb_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id =
+ of_match_device(mxsfb_dt_ids, &pdev->dev);
struct mxsfb_platform_data *pdata = pdev->dev.platform_data;
struct resource *res;
struct mxsfb_info *host;
struct fb_info *fb_info;
struct fb_modelist *modelist;
struct pinctrl *pinctrl;
+ int panel_enable;
+ enum of_gpio_flags flags;
int i, ret;
+ if (of_id)
+ pdev->id_entry = of_id->data;
+
if (!pdata) {
dev_err(&pdev->dev, "No platformdata. Giving up\n");
return -ENODEV;
@@ -807,6 +836,22 @@
goto error_getclock;
}
+ panel_enable = of_get_named_gpio_flags(pdev->dev.of_node,
+ "panel-enable-gpios", 0, &flags);
+ if (gpio_is_valid(panel_enable)) {
+ unsigned long f = GPIOF_OUT_INIT_HIGH;
+ if (flags == OF_GPIO_ACTIVE_LOW)
+ f = GPIOF_OUT_INIT_LOW;
+ ret = devm_gpio_request_one(&pdev->dev, panel_enable,
+ f, "panel-enable");
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to request gpio %d: %d\n",
+ panel_enable, ret);
+ goto error_panel_enable;
+ }
+ }
+
fb_info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
if (!fb_info->pseudo_palette) {
ret = -ENOMEM;
@@ -854,6 +899,7 @@
error_init_fb:
kfree(fb_info->pseudo_palette);
error_pseudo_pallette:
+error_panel_enable:
clk_put(host->clk);
error_getclock:
error_getpin:
@@ -901,19 +947,6 @@
writel(CTRL_RUN, host->base + LCDC_CTRL + REG_CLR);
}
-static struct platform_device_id mxsfb_devtype[] = {
- {
- .name = "imx23-fb",
- .driver_data = MXSFB_V3,
- }, {
- .name = "imx28-fb",
- .driver_data = MXSFB_V4,
- }, {
- /* sentinel */
- }
-};
-MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
-
static struct platform_driver mxsfb_driver = {
.probe = mxsfb_probe,
.remove = __devexit_p(mxsfb_remove),
@@ -921,6 +954,7 @@
.id_table = mxsfb_devtype,
.driver = {
.name = DRIVER_NAME,
+ .of_match_table = mxsfb_dt_ids,
},
};
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 8285d65..02ebfd5 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -430,6 +430,12 @@
#define omap_wdt_resume NULL
#endif
+static const struct of_device_id omap_wdt_of_match[] = {
+ { .compatible = "ti,omap3-wdt", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_wdt_of_match);
+
static struct platform_driver omap_wdt_driver = {
.probe = omap_wdt_probe,
.remove = __devexit_p(omap_wdt_remove),
@@ -439,6 +445,7 @@
.driver = {
.owner = THIS_MODULE,
.name = "omap_wdt",
+ .of_match_table = omap_wdt_of_match,
},
};
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 7301cdb..a383c18 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -301,10 +301,14 @@
goto out;
eb = path->nodes[level];
- if (!eb) {
- WARN_ON(1);
- ret = 1;
- goto out;
+ while (!eb) {
+ if (!level) {
+ WARN_ON(1);
+ ret = 1;
+ goto out;
+ }
+ level--;
+ eb = path->nodes[level];
}
ret = add_all_parents(root, path, parents, level, &ref->key_for_search,
@@ -835,6 +839,7 @@
}
ret = __add_delayed_refs(head, delayed_ref_seq,
&prefs_delayed);
+ mutex_unlock(&head->mutex);
if (ret) {
spin_unlock(&delayed_refs->lock);
goto out;
@@ -928,8 +933,6 @@
}
out:
- if (head)
- mutex_unlock(&head->mutex);
btrfs_free_path(path);
while (!list_empty(&prefs)) {
ref = list_first_entry(&prefs, struct __prelim_ref, list);
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 15cbc2b..8206b39 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -1024,11 +1024,18 @@
if (!looped && !tm)
return 0;
/*
- * we must have key remove operations in the log before the
- * replace operation.
+ * if there are no tree operation for the oldest root, we simply
+ * return it. this should only happen if that (old) root is at
+ * level 0.
*/
- BUG_ON(!tm);
+ if (!tm)
+ break;
+ /*
+ * if there's an operation that's not a root replacement, we
+ * found the oldest version of our root. normally, we'll find a
+ * MOD_LOG_KEY_REMOVE_WHILE_FREEING operation here.
+ */
if (tm->op != MOD_LOG_ROOT_REPLACE)
break;
@@ -1087,11 +1094,7 @@
tm->generation);
break;
case MOD_LOG_KEY_ADD:
- if (tm->slot != n - 1) {
- o_dst = btrfs_node_key_ptr_offset(tm->slot);
- o_src = btrfs_node_key_ptr_offset(tm->slot + 1);
- memmove_extent_buffer(eb, o_dst, o_src, p_size);
- }
+ /* if a move operation is needed it's in the log */
n--;
break;
case MOD_LOG_MOVE_KEYS:
@@ -1192,16 +1195,8 @@
}
tm = tree_mod_log_search(root->fs_info, logical, time_seq);
- /*
- * there was an item in the log when __tree_mod_log_oldest_root
- * returned. this one must not go away, because the time_seq passed to
- * us must be blocking its removal.
- */
- BUG_ON(!tm);
-
if (old_root)
- eb = alloc_dummy_extent_buffer(tm->index << PAGE_CACHE_SHIFT,
- root->nodesize);
+ eb = alloc_dummy_extent_buffer(logical, root->nodesize);
else
eb = btrfs_clone_extent_buffer(root->node);
btrfs_tree_read_unlock(root->node);
@@ -1216,7 +1211,10 @@
btrfs_set_header_level(eb, old_root->level);
btrfs_set_header_generation(eb, old_generation);
}
- __tree_mod_log_rewind(eb, time_seq, tm);
+ if (tm)
+ __tree_mod_log_rewind(eb, time_seq, tm);
+ else
+ WARN_ON(btrfs_header_level(eb) != 0);
extent_buffer_get(eb);
return eb;
@@ -2995,7 +2993,7 @@
static void insert_ptr(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct btrfs_path *path,
struct btrfs_disk_key *key, u64 bytenr,
- int slot, int level, int tree_mod_log)
+ int slot, int level)
{
struct extent_buffer *lower;
int nritems;
@@ -3008,7 +3006,7 @@
BUG_ON(slot > nritems);
BUG_ON(nritems == BTRFS_NODEPTRS_PER_BLOCK(root));
if (slot != nritems) {
- if (tree_mod_log && level)
+ if (level)
tree_mod_log_eb_move(root->fs_info, lower, slot + 1,
slot, nritems - slot);
memmove_extent_buffer(lower,
@@ -3016,7 +3014,7 @@
btrfs_node_key_ptr_offset(slot),
(nritems - slot) * sizeof(struct btrfs_key_ptr));
}
- if (tree_mod_log && level) {
+ if (level) {
ret = tree_mod_log_insert_key(root->fs_info, lower, slot,
MOD_LOG_KEY_ADD);
BUG_ON(ret < 0);
@@ -3104,7 +3102,7 @@
btrfs_mark_buffer_dirty(split);
insert_ptr(trans, root, path, &disk_key, split->start,
- path->slots[level + 1] + 1, level + 1, 1);
+ path->slots[level + 1] + 1, level + 1);
if (path->slots[level] >= mid) {
path->slots[level] -= mid;
@@ -3641,7 +3639,7 @@
btrfs_set_header_nritems(l, mid);
btrfs_item_key(right, &disk_key, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1] + 1, 1, 0);
+ path->slots[1] + 1, 1);
btrfs_mark_buffer_dirty(right);
btrfs_mark_buffer_dirty(l);
@@ -3848,7 +3846,7 @@
if (mid <= slot) {
btrfs_set_header_nritems(right, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1] + 1, 1, 0);
+ path->slots[1] + 1, 1);
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
@@ -3857,7 +3855,7 @@
} else {
btrfs_set_header_nritems(right, 0);
insert_ptr(trans, root, path, &disk_key, right->start,
- path->slots[1], 1, 0);
+ path->slots[1], 1);
btrfs_tree_unlock(path->nodes[0]);
free_extent_buffer(path->nodes[0]);
path->nodes[0] = right;
@@ -5121,6 +5119,18 @@
if (!path->skip_locking) {
ret = btrfs_try_tree_read_lock(next);
+ if (!ret && time_seq) {
+ /*
+ * If we don't get the lock, we may be racing
+ * with push_leaf_left, holding that lock while
+ * itself waiting for the leaf we've currently
+ * locked. To solve this situation, we give up
+ * on our lock and cycle.
+ */
+ btrfs_release_path(path);
+ cond_resched();
+ goto again;
+ }
if (!ret) {
btrfs_set_path_blocking(path);
btrfs_tree_read_lock(next);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 7b845ff..2936ca4 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2354,12 +2354,17 @@
BTRFS_CSUM_TREE_OBJECTID, csum_root);
if (ret)
goto recovery_tree_root;
-
csum_root->track_dirty = 1;
fs_info->generation = generation;
fs_info->last_trans_committed = generation;
+ ret = btrfs_recover_balance(fs_info);
+ if (ret) {
+ printk(KERN_WARNING "btrfs: failed to recover balance\n");
+ goto fail_block_groups;
+ }
+
ret = btrfs_init_dev_stats(fs_info);
if (ret) {
printk(KERN_ERR "btrfs: failed to init dev_stats: %d\n",
@@ -2485,20 +2490,23 @@
goto fail_trans_kthread;
}
- if (!(sb->s_flags & MS_RDONLY)) {
- down_read(&fs_info->cleanup_work_sem);
- err = btrfs_orphan_cleanup(fs_info->fs_root);
- if (!err)
- err = btrfs_orphan_cleanup(fs_info->tree_root);
+ if (sb->s_flags & MS_RDONLY)
+ return 0;
+
+ down_read(&fs_info->cleanup_work_sem);
+ if ((ret = btrfs_orphan_cleanup(fs_info->fs_root)) ||
+ (ret = btrfs_orphan_cleanup(fs_info->tree_root))) {
up_read(&fs_info->cleanup_work_sem);
+ close_ctree(tree_root);
+ return ret;
+ }
+ up_read(&fs_info->cleanup_work_sem);
- if (!err)
- err = btrfs_recover_balance(fs_info->tree_root);
-
- if (err) {
- close_ctree(tree_root);
- return err;
- }
+ ret = btrfs_resume_balance_async(fs_info);
+ if (ret) {
+ printk(KERN_WARNING "btrfs: failed to resume balance\n");
+ close_ctree(tree_root);
+ return ret;
}
return 0;
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 4b5a1e1..6e1d367 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -2347,12 +2347,10 @@
return count;
}
-
static void wait_for_more_refs(struct btrfs_delayed_ref_root *delayed_refs,
- unsigned long num_refs)
+ unsigned long num_refs,
+ struct list_head *first_seq)
{
- struct list_head *first_seq = delayed_refs->seq_head.next;
-
spin_unlock(&delayed_refs->lock);
pr_debug("waiting for more refs (num %ld, first %p)\n",
num_refs, first_seq);
@@ -2381,6 +2379,7 @@
struct btrfs_delayed_ref_root *delayed_refs;
struct btrfs_delayed_ref_node *ref;
struct list_head cluster;
+ struct list_head *first_seq = NULL;
int ret;
u64 delayed_start;
int run_all = count == (unsigned long)-1;
@@ -2436,8 +2435,10 @@
*/
consider_waiting = 1;
num_refs = delayed_refs->num_entries;
+ first_seq = root->fs_info->tree_mod_seq_list.next;
} else {
- wait_for_more_refs(delayed_refs, num_refs);
+ wait_for_more_refs(delayed_refs,
+ num_refs, first_seq);
/*
* after waiting, things have changed. we
* dropped the lock and someone else might have
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index aaa12c1..01c21b6 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -3324,6 +3324,7 @@
writepage_t writepage, void *data,
void (*flush_fn)(void *))
{
+ struct inode *inode = mapping->host;
int ret = 0;
int done = 0;
int nr_to_write_done = 0;
@@ -3334,6 +3335,18 @@
int scanned = 0;
int tag;
+ /*
+ * We have to hold onto the inode so that ordered extents can do their
+ * work when the IO finishes. The alternative to this is failing to add
+ * an ordered extent if the igrab() fails there and that is a huge pain
+ * to deal with, so instead just hold onto the inode throughout the
+ * writepages operation. If it fails here we are freeing up the inode
+ * anyway and we'd rather not waste our time writing out stuff that is
+ * going to be truncated anyway.
+ */
+ if (!igrab(inode))
+ return 0;
+
pagevec_init(&pvec, 0);
if (wbc->range_cyclic) {
index = mapping->writeback_index; /* Start from prev offset */
@@ -3428,6 +3441,7 @@
index = 0;
goto retry;
}
+ btrfs_add_delayed_iput(inode);
return ret;
}
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 70dc8ca..9aa01ec 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1334,7 +1334,6 @@
loff_t *ppos, size_t count, size_t ocount)
{
struct file *file = iocb->ki_filp;
- struct inode *inode = fdentry(file)->d_inode;
struct iov_iter i;
ssize_t written;
ssize_t written_buffered;
@@ -1344,18 +1343,6 @@
written = generic_file_direct_write(iocb, iov, &nr_segs, pos, ppos,
count, ocount);
- /*
- * the generic O_DIRECT will update in-memory i_size after the
- * DIOs are done. But our endio handlers that update the on
- * disk i_size never update past the in memory i_size. So we
- * need one more update here to catch any additions to the
- * file
- */
- if (inode->i_size != BTRFS_I(inode)->disk_i_size) {
- btrfs_ordered_update_i_size(inode, inode->i_size, NULL);
- mark_inode_dirty(inode);
- }
-
if (written < 0 || written == count)
return written;
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 81296c5..6c4e2ba 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -1543,29 +1543,26 @@
end = bitmap_info->offset + (u64)(BITS_PER_BITMAP * ctl->unit) - 1;
/*
- * XXX - this can go away after a few releases.
- *
- * since the only user of btrfs_remove_free_space is the tree logging
- * stuff, and the only way to test that is under crash conditions, we
- * want to have this debug stuff here just in case somethings not
- * working. Search the bitmap for the space we are trying to use to
- * make sure its actually there. If its not there then we need to stop
- * because something has gone wrong.
+ * We need to search for bits in this bitmap. We could only cover some
+ * of the extent in this bitmap thanks to how we add space, so we need
+ * to search for as much as it as we can and clear that amount, and then
+ * go searching for the next bit.
*/
search_start = *offset;
- search_bytes = *bytes;
+ search_bytes = ctl->unit;
search_bytes = min(search_bytes, end - search_start + 1);
ret = search_bitmap(ctl, bitmap_info, &search_start, &search_bytes);
BUG_ON(ret < 0 || search_start != *offset);
- if (*offset > bitmap_info->offset && *offset + *bytes > end) {
- bitmap_clear_bits(ctl, bitmap_info, *offset, end - *offset + 1);
- *bytes -= end - *offset + 1;
- *offset = end + 1;
- } else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) {
- bitmap_clear_bits(ctl, bitmap_info, *offset, *bytes);
- *bytes = 0;
- }
+ /* We may have found more bits than what we need */
+ search_bytes = min(search_bytes, *bytes);
+
+ /* Cannot clear past the end of the bitmap */
+ search_bytes = min(search_bytes, end - search_start + 1);
+
+ bitmap_clear_bits(ctl, bitmap_info, search_start, search_bytes);
+ *offset += search_bytes;
+ *bytes -= search_bytes;
if (*bytes) {
struct rb_node *next = rb_next(&bitmap_info->offset_index);
@@ -1596,7 +1593,7 @@
* everything over again.
*/
search_start = *offset;
- search_bytes = *bytes;
+ search_bytes = ctl->unit;
ret = search_bitmap(ctl, bitmap_info, &search_start,
&search_bytes);
if (ret < 0 || search_start != *offset)
@@ -1879,12 +1876,14 @@
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
struct btrfs_free_space *info;
- struct btrfs_free_space *next_info = NULL;
int ret = 0;
spin_lock(&ctl->tree_lock);
again:
+ if (!bytes)
+ goto out_lock;
+
info = tree_search_offset(ctl, offset, 0, 0);
if (!info) {
/*
@@ -1905,88 +1904,48 @@
}
}
- if (info->bytes < bytes && rb_next(&info->offset_index)) {
- u64 end;
- next_info = rb_entry(rb_next(&info->offset_index),
- struct btrfs_free_space,
- offset_index);
-
- if (next_info->bitmap)
- end = next_info->offset +
- BITS_PER_BITMAP * ctl->unit - 1;
- else
- end = next_info->offset + next_info->bytes;
-
- if (next_info->bytes < bytes ||
- next_info->offset > offset || offset > end) {
- printk(KERN_CRIT "Found free space at %llu, size %llu,"
- " trying to use %llu\n",
- (unsigned long long)info->offset,
- (unsigned long long)info->bytes,
- (unsigned long long)bytes);
- WARN_ON(1);
- ret = -EINVAL;
- goto out_lock;
- }
-
- info = next_info;
- }
-
- if (info->bytes == bytes) {
+ if (!info->bitmap) {
unlink_free_space(ctl, info);
- if (info->bitmap) {
- kfree(info->bitmap);
- ctl->total_bitmaps--;
- }
- kmem_cache_free(btrfs_free_space_cachep, info);
- ret = 0;
- goto out_lock;
- }
+ if (offset == info->offset) {
+ u64 to_free = min(bytes, info->bytes);
- if (!info->bitmap && info->offset == offset) {
- unlink_free_space(ctl, info);
- info->offset += bytes;
- info->bytes -= bytes;
- ret = link_free_space(ctl, info);
- WARN_ON(ret);
- goto out_lock;
- }
+ info->bytes -= to_free;
+ info->offset += to_free;
+ if (info->bytes) {
+ ret = link_free_space(ctl, info);
+ WARN_ON(ret);
+ } else {
+ kmem_cache_free(btrfs_free_space_cachep, info);
+ }
- if (!info->bitmap && info->offset <= offset &&
- info->offset + info->bytes >= offset + bytes) {
- u64 old_start = info->offset;
- /*
- * we're freeing space in the middle of the info,
- * this can happen during tree log replay
- *
- * first unlink the old info and then
- * insert it again after the hole we're creating
- */
- unlink_free_space(ctl, info);
- if (offset + bytes < info->offset + info->bytes) {
- u64 old_end = info->offset + info->bytes;
+ offset += to_free;
+ bytes -= to_free;
+ goto again;
+ } else {
+ u64 old_end = info->bytes + info->offset;
- info->offset = offset + bytes;
- info->bytes = old_end - info->offset;
+ info->bytes = offset - info->offset;
ret = link_free_space(ctl, info);
WARN_ON(ret);
if (ret)
goto out_lock;
- } else {
- /* the hole we're creating ends at the end
- * of the info struct, just free the info
- */
- kmem_cache_free(btrfs_free_space_cachep, info);
- }
- spin_unlock(&ctl->tree_lock);
- /* step two, insert a new info struct to cover
- * anything before the hole
- */
- ret = btrfs_add_free_space(block_group, old_start,
- offset - old_start);
- WARN_ON(ret); /* -ENOMEM */
- goto out;
+ /* Not enough bytes in this entry to satisfy us */
+ if (old_end < offset + bytes) {
+ bytes -= old_end - offset;
+ offset = old_end;
+ goto again;
+ } else if (old_end == offset + bytes) {
+ /* all done */
+ goto out_lock;
+ }
+ spin_unlock(&ctl->tree_lock);
+
+ ret = btrfs_add_free_space(block_group, offset + bytes,
+ old_end - (offset + bytes));
+ WARN_ON(ret);
+ goto out;
+ }
}
ret = remove_from_bitmap(ctl, info, &offset, &bytes);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index d8bb0db..a7d1921 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3754,7 +3754,7 @@
btrfs_wait_ordered_range(inode, 0, (u64)-1);
if (root->fs_info->log_root_recovering) {
- BUG_ON(!test_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
+ BUG_ON(test_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
&BTRFS_I(inode)->runtime_flags));
goto no_delete;
}
@@ -5876,8 +5876,17 @@
bh_result->b_size = len;
bh_result->b_bdev = em->bdev;
set_buffer_mapped(bh_result);
- if (create && !test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
- set_buffer_new(bh_result);
+ if (create) {
+ if (!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))
+ set_buffer_new(bh_result);
+
+ /*
+ * Need to update the i_size under the extent lock so buffered
+ * readers will get the updated i_size when we unlock.
+ */
+ if (start + len > i_size_read(inode))
+ i_size_write(inode, start + len);
+ }
free_extent_map(em);
@@ -6360,12 +6369,48 @@
*/
ordered = btrfs_lookup_ordered_range(inode, lockstart,
lockend - lockstart + 1);
- if (!ordered)
+
+ /*
+ * We need to make sure there are no buffered pages in this
+ * range either, we could have raced between the invalidate in
+ * generic_file_direct_write and locking the extent. The
+ * invalidate needs to happen so that reads after a write do not
+ * get stale data.
+ */
+ if (!ordered && (!writing ||
+ !test_range_bit(&BTRFS_I(inode)->io_tree,
+ lockstart, lockend, EXTENT_UPTODATE, 0,
+ cached_state)))
break;
+
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lockstart, lockend,
&cached_state, GFP_NOFS);
- btrfs_start_ordered_extent(inode, ordered, 1);
- btrfs_put_ordered_extent(ordered);
+
+ if (ordered) {
+ btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
+ } else {
+ /* Screw you mmap */
+ ret = filemap_write_and_wait_range(file->f_mapping,
+ lockstart,
+ lockend);
+ if (ret)
+ goto out;
+
+ /*
+ * If we found a page that couldn't be invalidated just
+ * fall back to buffered.
+ */
+ ret = invalidate_inode_pages2_range(file->f_mapping,
+ lockstart >> PAGE_CACHE_SHIFT,
+ lockend >> PAGE_CACHE_SHIFT);
+ if (ret) {
+ if (ret == -EBUSY)
+ ret = 0;
+ goto out;
+ }
+ }
+
cond_resched();
}
diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h
index 497c530..e440aa65 100644
--- a/fs/btrfs/ioctl.h
+++ b/fs/btrfs/ioctl.h
@@ -339,7 +339,7 @@
#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \
struct btrfs_ioctl_vol_args_v2)
-#define BTRFS_IOC_SUBVOL_GETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 25, __u64)
+#define BTRFS_IOC_SUBVOL_GETFLAGS _IOR(BTRFS_IOCTL_MAGIC, 25, __u64)
#define BTRFS_IOC_SUBVOL_SETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 26, __u64)
#define BTRFS_IOC_SCRUB _IOWR(BTRFS_IOCTL_MAGIC, 27, \
struct btrfs_ioctl_scrub_args)
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 0eb9a4d..e239915 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -1187,6 +1187,10 @@
if (ret)
goto restore;
+ ret = btrfs_resume_balance_async(fs_info);
+ if (ret)
+ goto restore;
+
sb->s_flags &= ~MS_RDONLY;
}
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 2017d0f..8abeae4 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -690,6 +690,8 @@
kfree(name);
iput(inode);
+
+ btrfs_run_delayed_items(trans, root);
return ret;
}
@@ -895,6 +897,7 @@
ret = btrfs_unlink_inode(trans, root, dir,
inode, victim_name,
victim_name_len);
+ btrfs_run_delayed_items(trans, root);
}
kfree(victim_name);
ptr = (unsigned long)(victim_ref + 1) + victim_name_len;
@@ -1475,6 +1478,9 @@
ret = btrfs_unlink_inode(trans, root, dir, inode,
name, name_len);
BUG_ON(ret);
+
+ btrfs_run_delayed_items(trans, root);
+
kfree(name);
iput(inode);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 8a3d259..ecaad40 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -2845,31 +2845,48 @@
static int balance_kthread(void *data)
{
- struct btrfs_balance_control *bctl =
- (struct btrfs_balance_control *)data;
- struct btrfs_fs_info *fs_info = bctl->fs_info;
+ struct btrfs_fs_info *fs_info = data;
int ret = 0;
mutex_lock(&fs_info->volume_mutex);
mutex_lock(&fs_info->balance_mutex);
- set_balance_control(bctl);
-
- if (btrfs_test_opt(fs_info->tree_root, SKIP_BALANCE)) {
- printk(KERN_INFO "btrfs: force skipping balance\n");
- } else {
+ if (fs_info->balance_ctl) {
printk(KERN_INFO "btrfs: continuing balance\n");
- ret = btrfs_balance(bctl, NULL);
+ ret = btrfs_balance(fs_info->balance_ctl, NULL);
}
mutex_unlock(&fs_info->balance_mutex);
mutex_unlock(&fs_info->volume_mutex);
+
return ret;
}
-int btrfs_recover_balance(struct btrfs_root *tree_root)
+int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info)
{
struct task_struct *tsk;
+
+ spin_lock(&fs_info->balance_lock);
+ if (!fs_info->balance_ctl) {
+ spin_unlock(&fs_info->balance_lock);
+ return 0;
+ }
+ spin_unlock(&fs_info->balance_lock);
+
+ if (btrfs_test_opt(fs_info->tree_root, SKIP_BALANCE)) {
+ printk(KERN_INFO "btrfs: force skipping balance\n");
+ return 0;
+ }
+
+ tsk = kthread_run(balance_kthread, fs_info, "btrfs-balance");
+ if (IS_ERR(tsk))
+ return PTR_ERR(tsk);
+
+ return 0;
+}
+
+int btrfs_recover_balance(struct btrfs_fs_info *fs_info)
+{
struct btrfs_balance_control *bctl;
struct btrfs_balance_item *item;
struct btrfs_disk_balance_args disk_bargs;
@@ -2882,29 +2899,30 @@
if (!path)
return -ENOMEM;
+ key.objectid = BTRFS_BALANCE_OBJECTID;
+ key.type = BTRFS_BALANCE_ITEM_KEY;
+ key.offset = 0;
+
+ ret = btrfs_search_slot(NULL, fs_info->tree_root, &key, path, 0, 0);
+ if (ret < 0)
+ goto out;
+ if (ret > 0) { /* ret = -ENOENT; */
+ ret = 0;
+ goto out;
+ }
+
bctl = kzalloc(sizeof(*bctl), GFP_NOFS);
if (!bctl) {
ret = -ENOMEM;
goto out;
}
- key.objectid = BTRFS_BALANCE_OBJECTID;
- key.type = BTRFS_BALANCE_ITEM_KEY;
- key.offset = 0;
-
- ret = btrfs_search_slot(NULL, tree_root, &key, path, 0, 0);
- if (ret < 0)
- goto out_bctl;
- if (ret > 0) { /* ret = -ENOENT; */
- ret = 0;
- goto out_bctl;
- }
-
leaf = path->nodes[0];
item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_balance_item);
- bctl->fs_info = tree_root->fs_info;
- bctl->flags = btrfs_balance_flags(leaf, item) | BTRFS_BALANCE_RESUME;
+ bctl->fs_info = fs_info;
+ bctl->flags = btrfs_balance_flags(leaf, item);
+ bctl->flags |= BTRFS_BALANCE_RESUME;
btrfs_balance_data(leaf, item, &disk_bargs);
btrfs_disk_balance_args_to_cpu(&bctl->data, &disk_bargs);
@@ -2913,14 +2931,13 @@
btrfs_balance_sys(leaf, item, &disk_bargs);
btrfs_disk_balance_args_to_cpu(&bctl->sys, &disk_bargs);
- tsk = kthread_run(balance_kthread, bctl, "btrfs-balance");
- if (IS_ERR(tsk))
- ret = PTR_ERR(tsk);
- else
- goto out;
+ mutex_lock(&fs_info->volume_mutex);
+ mutex_lock(&fs_info->balance_mutex);
-out_bctl:
- kfree(bctl);
+ set_balance_control(bctl);
+
+ mutex_unlock(&fs_info->balance_mutex);
+ mutex_unlock(&fs_info->volume_mutex);
out:
btrfs_free_path(path);
return ret;
@@ -4061,16 +4078,18 @@
BUG_ON(stripe_index >= bbio->num_stripes);
dev = bbio->stripes[stripe_index].dev;
- if (bio->bi_rw & WRITE)
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_WRITE_ERRS);
- else
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_READ_ERRS);
- if ((bio->bi_rw & WRITE_FLUSH) == WRITE_FLUSH)
- btrfs_dev_stat_inc(dev,
- BTRFS_DEV_STAT_FLUSH_ERRS);
- btrfs_dev_stat_print_on_error(dev);
+ if (dev->bdev) {
+ if (bio->bi_rw & WRITE)
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_WRITE_ERRS);
+ else
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_READ_ERRS);
+ if ((bio->bi_rw & WRITE_FLUSH) == WRITE_FLUSH)
+ btrfs_dev_stat_inc(dev,
+ BTRFS_DEV_STAT_FLUSH_ERRS);
+ btrfs_dev_stat_print_on_error(dev);
+ }
}
}
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 74366f2..95f66376 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -281,7 +281,8 @@
int btrfs_init_new_device(struct btrfs_root *root, char *path);
int btrfs_balance(struct btrfs_balance_control *bctl,
struct btrfs_ioctl_balance_args *bargs);
-int btrfs_recover_balance(struct btrfs_root *tree_root);
+int btrfs_resume_balance_async(struct btrfs_fs_info *fs_info);
+int btrfs_recover_balance(struct btrfs_fs_info *fs_info);
int btrfs_pause_balance(struct btrfs_fs_info *fs_info);
int btrfs_cancel_balance(struct btrfs_fs_info *fs_info);
int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 78db68a..0ae86dd 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1653,24 +1653,26 @@
* If yes, we have encountered a double deliminator
* reset the NULL character to the deliminator
*/
- if (tmp_end < end && tmp_end[1] == delim)
+ if (tmp_end < end && tmp_end[1] == delim) {
tmp_end[0] = delim;
- /* Keep iterating until we get to a single deliminator
- * OR the end
- */
- while ((tmp_end = strchr(tmp_end, delim)) != NULL &&
- (tmp_end[1] == delim)) {
- tmp_end = (char *) &tmp_end[2];
- }
+ /* Keep iterating until we get to a single
+ * deliminator OR the end
+ */
+ while ((tmp_end = strchr(tmp_end, delim))
+ != NULL && (tmp_end[1] == delim)) {
+ tmp_end = (char *) &tmp_end[2];
+ }
- /* Reset var options to point to next element */
- if (tmp_end) {
- tmp_end[0] = '\0';
- options = (char *) &tmp_end[1];
- } else
- /* Reached the end of the mount option string */
- options = end;
+ /* Reset var options to point to next element */
+ if (tmp_end) {
+ tmp_end[0] = '\0';
+ options = (char *) &tmp_end[1];
+ } else
+ /* Reached the end of the mount option
+ * string */
+ options = end;
+ }
/* Now build new password string */
temp_len = strlen(value);
@@ -3493,18 +3495,15 @@
* MS-CIFS indicates that servers are only limited by the client's
* bufsize for reads, testing against win98se shows that it throws
* INVALID_PARAMETER errors if you try to request too large a read.
+ * OS/2 just sends back short reads.
*
- * If the server advertises a MaxBufferSize of less than one page,
- * assume that it also can't satisfy reads larger than that either.
- *
- * FIXME: Is there a better heuristic for this?
+ * If the server doesn't advertise CAP_LARGE_READ_X, then assume that
+ * it can't handle a read request larger than its MaxBufferSize either.
*/
if (tcon->unix_ext && (unix_cap & CIFS_UNIX_LARGE_READ_CAP))
defsize = CIFS_DEFAULT_IOSIZE;
else if (server->capabilities & CAP_LARGE_READ_X)
defsize = CIFS_DEFAULT_NON_POSIX_RSIZE;
- else if (server->maxBuf >= PAGE_CACHE_SIZE)
- defsize = CIFSMaxBufSize;
else
defsize = server->maxBuf - sizeof(READ_RSP);
diff --git a/fs/ecryptfs/kthread.c b/fs/ecryptfs/kthread.c
index 69f994a..0dbe58a 100644
--- a/fs/ecryptfs/kthread.c
+++ b/fs/ecryptfs/kthread.c
@@ -149,7 +149,7 @@
(*lower_file) = dentry_open(lower_dentry, lower_mnt, flags, cred);
if (!IS_ERR(*lower_file))
goto out;
- if (flags & O_RDONLY) {
+ if ((flags & O_ACCMODE) == O_RDONLY) {
rc = PTR_ERR((*lower_file));
goto out;
}
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index 3a06f40..c0038f6 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -49,7 +49,10 @@
mutex_lock(&ecryptfs_daemon_hash_mux);
/* TODO: Just use file->private_data? */
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon) {
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EINVAL;
+ }
mutex_lock(&daemon->mux);
mutex_unlock(&ecryptfs_daemon_hash_mux);
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
@@ -122,6 +125,7 @@
goto out_unlock_daemon;
}
daemon->flags |= ECRYPTFS_DAEMON_MISCDEV_OPEN;
+ file->private_data = daemon;
atomic_inc(&ecryptfs_num_miscdev_opens);
out_unlock_daemon:
mutex_unlock(&daemon->mux);
@@ -152,9 +156,9 @@
mutex_lock(&ecryptfs_daemon_hash_mux);
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon)
+ daemon = file->private_data;
mutex_lock(&daemon->mux);
- BUG_ON(daemon->pid != task_pid(current));
BUG_ON(!(daemon->flags & ECRYPTFS_DAEMON_MISCDEV_OPEN));
daemon->flags &= ~ECRYPTFS_DAEMON_MISCDEV_OPEN;
atomic_dec(&ecryptfs_num_miscdev_opens);
@@ -191,31 +195,32 @@
struct ecryptfs_msg_ctx *msg_ctx, u8 msg_type,
u16 msg_flags, struct ecryptfs_daemon *daemon)
{
- int rc = 0;
+ struct ecryptfs_message *msg;
- mutex_lock(&msg_ctx->mux);
- msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
- GFP_KERNEL);
- if (!msg_ctx->msg) {
- rc = -ENOMEM;
+ msg = kmalloc((sizeof(*msg) + data_size), GFP_KERNEL);
+ if (!msg) {
printk(KERN_ERR "%s: Out of memory whilst attempting "
"to kmalloc(%zd, GFP_KERNEL)\n", __func__,
- (sizeof(*msg_ctx->msg) + data_size));
- goto out_unlock;
+ (sizeof(*msg) + data_size));
+ return -ENOMEM;
}
+
+ mutex_lock(&msg_ctx->mux);
+ msg_ctx->msg = msg;
msg_ctx->msg->index = msg_ctx->index;
msg_ctx->msg->data_len = data_size;
msg_ctx->type = msg_type;
memcpy(msg_ctx->msg->data, data, data_size);
msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
- mutex_lock(&daemon->mux);
list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue);
+ mutex_unlock(&msg_ctx->mux);
+
+ mutex_lock(&daemon->mux);
daemon->num_queued_msg_ctx++;
wake_up_interruptible(&daemon->wait);
mutex_unlock(&daemon->mux);
-out_unlock:
- mutex_unlock(&msg_ctx->mux);
- return rc;
+
+ return 0;
}
/*
@@ -269,8 +274,16 @@
mutex_lock(&ecryptfs_daemon_hash_mux);
/* TODO: Just use file->private_data? */
rc = ecryptfs_find_daemon_by_euid(&daemon, euid, current_user_ns());
- BUG_ON(rc || !daemon);
+ if (rc || !daemon) {
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EINVAL;
+ }
mutex_lock(&daemon->mux);
+ if (task_pid(current) != daemon->pid) {
+ mutex_unlock(&daemon->mux);
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
+ return -EPERM;
+ }
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
rc = 0;
mutex_unlock(&ecryptfs_daemon_hash_mux);
@@ -307,9 +320,6 @@
* message from the queue; try again */
goto check_list;
}
- BUG_ON(euid != daemon->euid);
- BUG_ON(current_user_ns() != daemon->user_ns);
- BUG_ON(task_pid(current) != daemon->pid);
msg_ctx = list_first_entry(&daemon->msg_ctx_out_queue,
struct ecryptfs_msg_ctx, daemon_out_list);
BUG_ON(!msg_ctx);
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 81a4cd2..4f7795f 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -456,7 +456,7 @@
stats->ls_gets++;
stats->ls_total += ktime_to_ns(kt);
/* overflow */
- if (unlikely(stats->ls_gets) == 0) {
+ if (unlikely(stats->ls_gets == 0)) {
stats->ls_gets++;
stats->ls_total = ktime_to_ns(kt);
}
@@ -3932,6 +3932,8 @@
static void ocfs2_schedule_blocked_lock(struct ocfs2_super *osb,
struct ocfs2_lock_res *lockres)
{
+ unsigned long flags;
+
assert_spin_locked(&lockres->l_lock);
if (lockres->l_flags & OCFS2_LOCK_FREEING) {
@@ -3945,21 +3947,22 @@
lockres_or_flags(lockres, OCFS2_LOCK_QUEUED);
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (list_empty(&lockres->l_blocked_list)) {
list_add_tail(&lockres->l_blocked_list,
&osb->blocked_lock_list);
osb->blocked_lock_count++;
}
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
}
static void ocfs2_downconvert_thread_do_work(struct ocfs2_super *osb)
{
unsigned long processed;
+ unsigned long flags;
struct ocfs2_lock_res *lockres;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
/* grab this early so we know to try again if a state change and
* wake happens part-way through our work */
osb->dc_work_sequence = osb->dc_wake_sequence;
@@ -3972,38 +3975,40 @@
struct ocfs2_lock_res, l_blocked_list);
list_del_init(&lockres->l_blocked_list);
osb->blocked_lock_count--;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
BUG_ON(!processed);
processed--;
ocfs2_process_blocked_lock(osb, lockres);
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
}
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
}
static int ocfs2_downconvert_thread_lists_empty(struct ocfs2_super *osb)
{
int empty = 0;
+ unsigned long flags;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (list_empty(&osb->blocked_lock_list))
empty = 1;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
return empty;
}
static int ocfs2_downconvert_thread_should_wake(struct ocfs2_super *osb)
{
int should_wake = 0;
+ unsigned long flags;
- spin_lock(&osb->dc_task_lock);
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
if (osb->dc_work_sequence != osb->dc_wake_sequence)
should_wake = 1;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
return should_wake;
}
@@ -4033,10 +4038,12 @@
void ocfs2_wake_downconvert_thread(struct ocfs2_super *osb)
{
- spin_lock(&osb->dc_task_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&osb->dc_task_lock, flags);
/* make sure the voting thread gets a swipe at whatever changes
* the caller may have made to the voting state */
osb->dc_wake_sequence++;
- spin_unlock(&osb->dc_task_lock);
+ spin_unlock_irqrestore(&osb->dc_task_lock, flags);
wake_up(&osb->dc_event);
}
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index 2f5b92e..70b5863 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -923,8 +923,6 @@
ocfs2_inode_unlock(inode, 0);
out:
- if (ret && ret != -ENXIO)
- ret = -ENXIO;
return ret;
}
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 061591a..98513c8 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2422,8 +2422,10 @@
unaligned_dio = 0;
}
- if (unaligned_dio)
+ if (unaligned_dio) {
+ ocfs2_iocb_clear_unaligned_aio(iocb);
atomic_dec(&OCFS2_I(inode)->ip_unaligned_aio);
+ }
out:
if (rw_level != -1)
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 92fcd575..0a86e30 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -399,8 +399,6 @@
msecs_to_jiffies(oinfo->dqi_syncms));
out_err:
- if (status)
- mlog_errno(status);
return status;
out_unlock:
ocfs2_unlock_global_qf(oinfo, 0);
diff --git a/fs/open.c b/fs/open.c
index d6c79a0..1540632 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -397,10 +397,10 @@
{
struct file *file;
struct inode *inode;
- int error;
+ int error, fput_needed;
error = -EBADF;
- file = fget(fd);
+ file = fget_raw_light(fd, &fput_needed);
if (!file)
goto out;
@@ -414,7 +414,7 @@
if (!error)
set_fs_pwd(current->fs, &file->f_path);
out_putf:
- fput(file);
+ fput_light(file, fput_needed);
out:
return error;
}
diff --git a/fs/splice.c b/fs/splice.c
index c9f1318..7bf08fa 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -273,13 +273,16 @@
* Check if we need to grow the arrays holding pages and partial page
* descriptions.
*/
-int splice_grow_spd(struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
+int splice_grow_spd(const struct pipe_inode_info *pipe, struct splice_pipe_desc *spd)
{
- if (pipe->buffers <= PIPE_DEF_BUFFERS)
+ unsigned int buffers = ACCESS_ONCE(pipe->buffers);
+
+ spd->nr_pages_max = buffers;
+ if (buffers <= PIPE_DEF_BUFFERS)
return 0;
- spd->pages = kmalloc(pipe->buffers * sizeof(struct page *), GFP_KERNEL);
- spd->partial = kmalloc(pipe->buffers * sizeof(struct partial_page), GFP_KERNEL);
+ spd->pages = kmalloc(buffers * sizeof(struct page *), GFP_KERNEL);
+ spd->partial = kmalloc(buffers * sizeof(struct partial_page), GFP_KERNEL);
if (spd->pages && spd->partial)
return 0;
@@ -289,10 +292,9 @@
return -ENOMEM;
}
-void splice_shrink_spd(struct pipe_inode_info *pipe,
- struct splice_pipe_desc *spd)
+void splice_shrink_spd(struct splice_pipe_desc *spd)
{
- if (pipe->buffers <= PIPE_DEF_BUFFERS)
+ if (spd->nr_pages_max <= PIPE_DEF_BUFFERS)
return;
kfree(spd->pages);
@@ -315,6 +317,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &page_cache_pipe_buf_ops,
.spd_release = spd_release_page,
@@ -326,7 +329,7 @@
index = *ppos >> PAGE_CACHE_SHIFT;
loff = *ppos & ~PAGE_CACHE_MASK;
req_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- nr_pages = min(req_pages, pipe->buffers);
+ nr_pages = min(req_pages, spd.nr_pages_max);
/*
* Lookup the (hopefully) full range of pages we need.
@@ -497,7 +500,7 @@
if (spd.nr_pages)
error = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return error;
}
@@ -598,6 +601,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &default_pipe_buf_ops,
.spd_release = spd_release_page,
@@ -608,8 +612,8 @@
res = -ENOMEM;
vec = __vec;
- if (pipe->buffers > PIPE_DEF_BUFFERS) {
- vec = kmalloc(pipe->buffers * sizeof(struct iovec), GFP_KERNEL);
+ if (spd.nr_pages_max > PIPE_DEF_BUFFERS) {
+ vec = kmalloc(spd.nr_pages_max * sizeof(struct iovec), GFP_KERNEL);
if (!vec)
goto shrink_ret;
}
@@ -617,7 +621,7 @@
offset = *ppos & ~PAGE_CACHE_MASK;
nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- for (i = 0; i < nr_pages && i < pipe->buffers && len; i++) {
+ for (i = 0; i < nr_pages && i < spd.nr_pages_max && len; i++) {
struct page *page;
page = alloc_page(GFP_USER);
@@ -665,7 +669,7 @@
shrink_ret:
if (vec != __vec)
kfree(vec);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return res;
err:
@@ -1614,6 +1618,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &user_page_pipe_buf_ops,
.spd_release = spd_release_page,
@@ -1629,13 +1634,13 @@
spd.nr_pages = get_iovec_page_array(iov, nr_segs, spd.pages,
spd.partial, false,
- pipe->buffers);
+ spd.nr_pages_max);
if (spd.nr_pages <= 0)
ret = spd.nr_pages;
else
ret = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return ret;
}
diff --git a/include/linux/aio.h b/include/linux/aio.h
index 2314ad8..b1a520e 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -140,6 +140,7 @@
(x)->ki_dtor = NULL; \
(x)->ki_obj.tsk = tsk; \
(x)->ki_user_data = 0; \
+ (x)->private = NULL; \
} while (0)
#define AIO_RING_MAGIC 0xa10a10a1
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ba43f40..07954b0 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -827,7 +827,6 @@
extern void blk_complete_request(struct request *);
extern void __blk_complete_request(struct request *);
extern void blk_abort_request(struct request *);
-extern void blk_abort_queue(struct request_queue *);
extern void blk_unprep_request(struct request *);
/*
diff --git a/include/linux/input.h b/include/linux/input.h
index a816714..2740d08 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -116,6 +116,7 @@
/**
* EVIOCGMTSLOTS(len) - get MT slot values
+ * @len: size of the data buffer in bytes
*
* The ioctl buffer argument should be binary equivalent to
*
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index c446435..96c158a 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -815,7 +815,7 @@
#ifdef CONFIG_HAVE_KVM_EVENTFD
void kvm_eventfd_init(struct kvm *kvm);
-int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags);
+int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args);
void kvm_irqfd_release(struct kvm *kvm);
void kvm_irq_routing_update(struct kvm *, struct kvm_irq_routing_table *);
int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args);
@@ -824,7 +824,7 @@
static inline void kvm_eventfd_init(struct kvm *kvm) {}
-static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+static inline int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
{
return -EINVAL;
}
diff --git a/arch/arm/mach-mxs/include/mach/mxsfb.h b/include/linux/mxsfb.h
similarity index 95%
rename from arch/arm/mach-mxs/include/mach/mxsfb.h
rename to include/linux/mxsfb.h
index e4d7979..f14943d 100644
--- a/arch/arm/mach-mxs/include/mach/mxsfb.h
+++ b/include/linux/mxsfb.h
@@ -14,8 +14,8 @@
* MA 02110-1301, USA.
*/
-#ifndef __MACH_FB_H
-#define __MACH_FB_H
+#ifndef __LINUX_MXSFB_H
+#define __LINUX_MXSFB_H
#include <linux/fb.h>
@@ -46,4 +46,4 @@
*/
};
-#endif /* __MACH_FB_H */
+#endif /* __LINUX_MXSFB_H */
diff --git a/include/linux/platform_data/clk-nomadik.h b/include/linux/platform_data/clk-nomadik.h
new file mode 100644
index 0000000..5713c87
--- /dev/null
+++ b/include/linux/platform_data/clk-nomadik.h
@@ -0,0 +1,2 @@
+/* Minimal platform data header */
+void nomadik_clk_init(void);
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
index 3988012..289760f 100644
--- a/include/linux/prctl.h
+++ b/include/linux/prctl.h
@@ -141,6 +141,8 @@
* Changing LSM security domain is considered a new privilege. So, for example,
* asking selinux for a specific new context (e.g. with runcon) will result
* in execve returning -EPERM.
+ *
+ * See Documentation/prctl/no_new_privs.txt for more details.
*/
#define PR_SET_NO_NEW_PRIVS 38
#define PR_GET_NO_NEW_PRIVS 39
diff --git a/include/linux/splice.h b/include/linux/splice.h
index 26e5b61..09a545a 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -51,7 +51,8 @@
struct splice_pipe_desc {
struct page **pages; /* page map */
struct partial_page *partial; /* pages[] may not be contig */
- int nr_pages; /* number of pages in map */
+ int nr_pages; /* number of populated pages in map */
+ unsigned int nr_pages_max; /* pages[] & partial[] arrays size */
unsigned int flags; /* splice flags */
const struct pipe_buf_operations *ops;/* ops associated with output pipe */
void (*spd_release)(struct splice_pipe_desc *, unsigned int);
@@ -85,9 +86,8 @@
/*
* for dynamic pipe sizing
*/
-extern int splice_grow_spd(struct pipe_inode_info *, struct splice_pipe_desc *);
-extern void splice_shrink_spd(struct pipe_inode_info *,
- struct splice_pipe_desc *);
+extern int splice_grow_spd(const struct pipe_inode_info *, struct splice_pipe_desc *);
+extern void splice_shrink_spd(struct splice_pipe_desc *);
extern void spd_release_page(struct splice_pipe_desc *, unsigned int);
extern const struct pipe_buf_operations page_cache_pipe_buf_ops;
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index e4652fe..fecdf31 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -912,6 +912,9 @@
/* Is this structure kfree()able? */
malloced:1;
+ /* Has this transport moved the ctsn since we last sacked */
+ __u32 sack_generation;
+
struct flowi fl;
/* This is the peer's IP address and port. */
@@ -1584,6 +1587,7 @@
*/
__u8 sack_needed; /* Do we need to sack the peer? */
__u32 sack_cnt;
+ __u32 sack_generation;
/* These are capabilities which our peer advertised. */
__u8 ecn_capable:1, /* Can peer do ECN? */
diff --git a/include/net/sctp/tsnmap.h b/include/net/sctp/tsnmap.h
index e7728bc..2c5d2b4 100644
--- a/include/net/sctp/tsnmap.h
+++ b/include/net/sctp/tsnmap.h
@@ -117,7 +117,8 @@
int sctp_tsnmap_check(const struct sctp_tsnmap *, __u32 tsn);
/* Mark this TSN as seen. */
-int sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn);
+int sctp_tsnmap_mark(struct sctp_tsnmap *, __u32 tsn,
+ struct sctp_transport *trans);
/* Mark this TSN and all lower as seen. */
void sctp_tsnmap_skip(struct sctp_tsnmap *map, __u32 tsn);
diff --git a/kernel/relay.c b/kernel/relay.c
index ab56a17..e8cd202 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -1235,6 +1235,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.nr_pages = 0,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.partial = partial,
.flags = flags,
.ops = &relay_pipe_buf_ops,
@@ -1302,8 +1303,8 @@
ret += padding;
out:
- splice_shrink_spd(pipe, &spd);
- return ret;
+ splice_shrink_spd(&spd);
+ return ret;
}
static ssize_t relay_file_splice_read(struct file *in,
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 49249c2..a7fa070 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3609,6 +3609,7 @@
.pages = pages_def,
.partial = partial_def,
.nr_pages = 0, /* This gets updated below. */
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &tracing_pipe_buf_ops,
.spd_release = tracing_spd_release_pipe,
@@ -3680,7 +3681,7 @@
ret = splice_to_pipe(pipe, &spd);
out:
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
return ret;
out_err:
@@ -4231,6 +4232,7 @@
struct splice_pipe_desc spd = {
.pages = pages_def,
.partial = partial_def,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &buffer_pipe_buf_ops,
.spd_release = buffer_spd_release,
@@ -4318,7 +4320,7 @@
}
ret = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
out:
return ret;
}
diff --git a/mm/madvise.c b/mm/madvise.c
index deff1b6..14d260f 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -15,6 +15,7 @@
#include <linux/sched.h>
#include <linux/ksm.h>
#include <linux/fs.h>
+#include <linux/file.h>
/*
* Any behaviour which results in changes to the vma->vm_flags needs to
@@ -204,14 +205,16 @@
{
loff_t offset;
int error;
+ struct file *f;
*prev = NULL; /* tell sys_madvise we drop mmap_sem */
if (vma->vm_flags & (VM_LOCKED|VM_NONLINEAR|VM_HUGETLB))
return -EINVAL;
- if (!vma->vm_file || !vma->vm_file->f_mapping
- || !vma->vm_file->f_mapping->host) {
+ f = vma->vm_file;
+
+ if (!f || !f->f_mapping || !f->f_mapping->host) {
return -EINVAL;
}
@@ -221,11 +224,18 @@
offset = (loff_t)(start - vma->vm_start)
+ ((loff_t)vma->vm_pgoff << PAGE_SHIFT);
- /* filesystem's fallocate may need to take i_mutex */
+ /*
+ * Filesystem's fallocate may need to take i_mutex. We need to
+ * explicitly grab a reference because the vma (and hence the
+ * vma's reference to the file) can go away as soon as we drop
+ * mmap_sem.
+ */
+ get_file(f);
up_read(¤t->mm->mmap_sem);
- error = do_fallocate(vma->vm_file,
+ error = do_fallocate(f,
FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
offset, end - start);
+ fput(f);
down_read(¤t->mm->mmap_sem);
return error;
}
diff --git a/mm/shmem.c b/mm/shmem.c
index a15a466..4ce02e0 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1594,6 +1594,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = PIPE_DEF_BUFFERS,
.flags = flags,
.ops = &page_cache_pipe_buf_ops,
.spd_release = spd_release_page,
@@ -1682,7 +1683,7 @@
if (spd.nr_pages)
error = splice_to_pipe(pipe, &spd);
- splice_shrink_spd(pipe, &spd);
+ splice_shrink_spd(&spd);
if (error > 0) {
*ppos += error;
diff --git a/net/core/dev.c b/net/core/dev.c
index 6df2140..84f01ba 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1136,8 +1136,8 @@
no_module = request_module("netdev-%s", name);
if (no_module && capable(CAP_SYS_MODULE)) {
if (!request_module("%s", name))
- pr_err("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
- name);
+ pr_warn("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
+ name);
}
}
EXPORT_SYMBOL(dev_load);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index d78671e..46a3d23 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -1755,6 +1755,7 @@
struct splice_pipe_desc spd = {
.pages = pages,
.partial = partial,
+ .nr_pages_max = MAX_SKB_FRAGS,
.flags = flags,
.ops = &sock_pipe_buf_ops,
.spd_release = sock_spd_release,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 66e4fcd..a4bb856 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1342,7 +1342,6 @@
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
u32 changed = 0;
- u8 bssid[ETH_ALEN];
ASSERT_MGD_MTX(ifmgd);
@@ -1354,10 +1353,7 @@
ieee80211_stop_poll(sdata);
- memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
-
ifmgd->associated = NULL;
- memset(ifmgd->bssid, 0, ETH_ALEN);
/*
* we need to commit the associated = NULL change because the
@@ -1377,7 +1373,7 @@
netif_carrier_off(sdata->dev);
mutex_lock(&local->sta_mtx);
- sta = sta_info_get(sdata, bssid);
+ sta = sta_info_get(sdata, ifmgd->bssid);
if (sta) {
set_sta_flag(sta, WLAN_STA_BLOCK_BA);
ieee80211_sta_tear_down_BA_sessions(sta, tx);
@@ -1386,13 +1382,16 @@
/* deauthenticate/disassociate now */
if (tx || frame_buf)
- ieee80211_send_deauth_disassoc(sdata, bssid, stype, reason,
- tx, frame_buf);
+ ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
+ reason, tx, frame_buf);
/* flush out frame */
if (tx)
drv_flush(local, false);
+ /* clear bssid only after building the needed mgmt frames */
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+
/* remove AP and TDLS peers */
sta_info_flush(local, sdata);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 7bcecf7..965e6ec 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2455,7 +2455,7 @@
* frames that we didn't handle, including returning unknown
* ones. For all other modes we will return them to the sender,
* setting the 0x80 bit in the action category, as required by
- * 802.11-2007 7.3.1.11.
+ * 802.11-2012 9.24.4.
* Newer versions of hostapd shall also use the management frame
* registration mechanisms, but older ones still use cooked
* monitor interfaces so push all frames there.
@@ -2465,6 +2465,9 @@
sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
return RX_DROP_MONITOR;
+ if (is_multicast_ether_addr(mgmt->da))
+ return RX_DROP_MONITOR;
+
/* do not return rejected action frames */
if (mgmt->u.action.category & 0x80)
return RX_DROP_UNUSABLE;
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index 819c342f..9730882 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -640,6 +640,14 @@
}
static int
+ip_set_none(struct sock *ctnl, struct sk_buff *skb,
+ const struct nlmsghdr *nlh,
+ const struct nlattr * const attr[])
+{
+ return -EOPNOTSUPP;
+}
+
+static int
ip_set_create(struct sock *ctnl, struct sk_buff *skb,
const struct nlmsghdr *nlh,
const struct nlattr * const attr[])
@@ -1539,6 +1547,10 @@
}
static const struct nfnl_callback ip_set_netlink_subsys_cb[IPSET_MSG_MAX] = {
+ [IPSET_CMD_NONE] = {
+ .call = ip_set_none,
+ .attr_count = IPSET_ATTR_CMD_MAX,
+ },
[IPSET_CMD_CREATE] = {
.call = ip_set_create,
.attr_count = IPSET_ATTR_CMD_MAX,
diff --git a/net/netfilter/ipset/ip_set_hash_netiface.c b/net/netfilter/ipset/ip_set_hash_netiface.c
index ee863943..d5d3607 100644
--- a/net/netfilter/ipset/ip_set_hash_netiface.c
+++ b/net/netfilter/ipset/ip_set_hash_netiface.c
@@ -38,30 +38,6 @@
#define iface_data(n) (rb_entry(n, struct iface_node, node)->iface)
-static inline long
-ifname_compare(const char *_a, const char *_b)
-{
- const long *a = (const long *)_a;
- const long *b = (const long *)_b;
-
- BUILD_BUG_ON(IFNAMSIZ > 4 * sizeof(unsigned long));
- if (a[0] != b[0])
- return a[0] - b[0];
- if (IFNAMSIZ > sizeof(long)) {
- if (a[1] != b[1])
- return a[1] - b[1];
- }
- if (IFNAMSIZ > 2 * sizeof(long)) {
- if (a[2] != b[2])
- return a[2] - b[2];
- }
- if (IFNAMSIZ > 3 * sizeof(long)) {
- if (a[3] != b[3])
- return a[3] - b[3];
- }
- return 0;
-}
-
static void
rbtree_destroy(struct rb_root *root)
{
@@ -99,7 +75,7 @@
while (n) {
const char *d = iface_data(n);
- long res = ifname_compare(*iface, d);
+ int res = strcmp(*iface, d);
if (res < 0)
n = n->rb_left;
@@ -121,7 +97,7 @@
while (*n) {
char *ifname = iface_data(*n);
- long res = ifname_compare(*iface, ifname);
+ int res = strcmp(*iface, ifname);
p = *n;
if (res < 0)
@@ -366,7 +342,7 @@
struct hash_netiface4_elem data = { .cidr = HOST_MASK };
u32 ip = 0, ip_to, last;
u32 timeout = h->timeout;
- char iface[IFNAMSIZ] = {};
+ char iface[IFNAMSIZ];
int ret;
if (unlikely(!tb[IPSET_ATTR_IP] ||
@@ -663,7 +639,7 @@
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_netiface6_elem data = { .cidr = HOST_MASK };
u32 timeout = h->timeout;
- char iface[IFNAMSIZ] = {};
+ char iface[IFNAMSIZ];
int ret;
if (unlikely(!tb[IPSET_ATTR_IP] ||
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index dd811b8..d43e3c1 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -76,19 +76,19 @@
#ifdef CONFIG_IP_VS_IPV6
/* Taken from rt6_fill_node() in net/ipv6/route.c, is there a better way? */
-static int __ip_vs_addr_is_local_v6(struct net *net,
- const struct in6_addr *addr)
+static bool __ip_vs_addr_is_local_v6(struct net *net,
+ const struct in6_addr *addr)
{
- struct rt6_info *rt;
struct flowi6 fl6 = {
.daddr = *addr,
};
+ struct dst_entry *dst = ip6_route_output(net, NULL, &fl6);
+ bool is_local;
- rt = (struct rt6_info *)ip6_route_output(net, NULL, &fl6);
- if (rt && rt->dst.dev && (rt->dst.dev->flags & IFF_LOOPBACK))
- return 1;
+ is_local = !dst->error && dst->dev && (dst->dev->flags & IFF_LOOPBACK);
- return 0;
+ dst_release(dst);
+ return is_local;
}
#endif
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index 3e797d1..791d56b 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -169,8 +169,10 @@
err = nla_parse(cda, ss->cb[cb_id].attr_count,
attr, attrlen, ss->cb[cb_id].policy);
- if (err < 0)
+ if (err < 0) {
+ rcu_read_unlock();
return err;
+ }
if (nc->call_rcu) {
err = nc->call_rcu(net->nfnl, skb, nlh,
diff --git a/net/nfc/nci/ntf.c b/net/nfc/nci/ntf.c
index cb26461..2ab196a 100644
--- a/net/nfc/nci/ntf.c
+++ b/net/nfc/nci/ntf.c
@@ -106,7 +106,7 @@
nfca_poll->sens_res = __le16_to_cpu(*((__u16 *)data));
data += 2;
- nfca_poll->nfcid1_len = *data++;
+ nfca_poll->nfcid1_len = min_t(__u8, *data++, NFC_NFCID1_MAXSIZE);
pr_debug("sens_res 0x%x, nfcid1_len %d\n",
nfca_poll->sens_res, nfca_poll->nfcid1_len);
@@ -130,7 +130,7 @@
struct rf_tech_specific_params_nfcb_poll *nfcb_poll,
__u8 *data)
{
- nfcb_poll->sensb_res_len = *data++;
+ nfcb_poll->sensb_res_len = min_t(__u8, *data++, NFC_SENSB_RES_MAXSIZE);
pr_debug("sensb_res_len %d\n", nfcb_poll->sensb_res_len);
@@ -145,7 +145,7 @@
__u8 *data)
{
nfcf_poll->bit_rate = *data++;
- nfcf_poll->sensf_res_len = *data++;
+ nfcf_poll->sensf_res_len = min_t(__u8, *data++, NFC_SENSF_RES_MAXSIZE);
pr_debug("bit_rate %d, sensf_res_len %d\n",
nfcf_poll->bit_rate, nfcf_poll->sensf_res_len);
@@ -331,7 +331,7 @@
switch (ntf->activation_rf_tech_and_mode) {
case NCI_NFC_A_PASSIVE_POLL_MODE:
nfca_poll = &ntf->activation_params.nfca_poll_iso_dep;
- nfca_poll->rats_res_len = *data++;
+ nfca_poll->rats_res_len = min_t(__u8, *data++, 20);
pr_debug("rats_res_len %d\n", nfca_poll->rats_res_len);
if (nfca_poll->rats_res_len > 0) {
memcpy(nfca_poll->rats_res,
@@ -341,7 +341,7 @@
case NCI_NFC_B_PASSIVE_POLL_MODE:
nfcb_poll = &ntf->activation_params.nfcb_poll_iso_dep;
- nfcb_poll->attrib_res_len = *data++;
+ nfcb_poll->attrib_res_len = min_t(__u8, *data++, 50);
pr_debug("attrib_res_len %d\n", nfcb_poll->attrib_res_len);
if (nfcb_poll->attrib_res_len > 0) {
memcpy(nfcb_poll->attrib_res,
diff --git a/net/nfc/rawsock.c b/net/nfc/rawsock.c
index ec1134c..8b8a6a2 100644
--- a/net/nfc/rawsock.c
+++ b/net/nfc/rawsock.c
@@ -54,7 +54,10 @@
{
struct sock *sk = sock->sk;
- pr_debug("sock=%p\n", sock);
+ pr_debug("sock=%p sk=%p\n", sock, sk);
+
+ if (!sk)
+ return 0;
sock_orphan(sk);
sock_put(sk);
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 5bc9ab1..b16517e 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -271,6 +271,7 @@
*/
asoc->peer.sack_needed = 1;
asoc->peer.sack_cnt = 0;
+ asoc->peer.sack_generation = 1;
/* Assume that the peer will tell us if he recognizes ASCONF
* as part of INIT exchange.
diff --git a/net/sctp/output.c b/net/sctp/output.c
index f1b7d4b..6ae47aca 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -248,6 +248,11 @@
/* If the SACK timer is running, we have a pending SACK */
if (timer_pending(timer)) {
struct sctp_chunk *sack;
+
+ if (pkt->transport->sack_generation !=
+ pkt->transport->asoc->peer.sack_generation)
+ return retval;
+
asoc->a_rwnd = asoc->rwnd;
sack = sctp_make_sack(asoc);
if (sack) {
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index a85eeeb..b6de71ef 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -734,8 +734,10 @@
int len;
__u32 ctsn;
__u16 num_gabs, num_dup_tsns;
+ struct sctp_association *aptr = (struct sctp_association *)asoc;
struct sctp_tsnmap *map = (struct sctp_tsnmap *)&asoc->peer.tsn_map;
struct sctp_gap_ack_block gabs[SCTP_MAX_GABS];
+ struct sctp_transport *trans;
memset(gabs, 0, sizeof(gabs));
ctsn = sctp_tsnmap_get_ctsn(map);
@@ -805,6 +807,20 @@
sctp_addto_chunk(retval, sizeof(__u32) * num_dup_tsns,
sctp_tsnmap_get_dups(map));
+ /* Once we have a sack generated, check to see what our sack
+ * generation is, if its 0, reset the transports to 0, and reset
+ * the association generation to 1
+ *
+ * The idea is that zero is never used as a valid generation for the
+ * association so no transport will match after a wrap event like this,
+ * Until the next sack
+ */
+ if (++aptr->peer.sack_generation == 0) {
+ list_for_each_entry(trans, &asoc->peer.transport_addr_list,
+ transports)
+ trans->sack_generation = 0;
+ aptr->peer.sack_generation = 1;
+ }
nodata:
return retval;
}
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index c96d1a8..8716da1 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -1268,7 +1268,7 @@
case SCTP_CMD_REPORT_TSN:
/* Record the arrival of a TSN. */
error = sctp_tsnmap_mark(&asoc->peer.tsn_map,
- cmd->obj.u32);
+ cmd->obj.u32, NULL);
break;
case SCTP_CMD_REPORT_FWDTSN:
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index b026ba0..1dcceb6 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -68,6 +68,8 @@
peer->af_specific = sctp_get_af_specific(addr->sa.sa_family);
memset(&peer->saddr, 0, sizeof(union sctp_addr));
+ peer->sack_generation = 0;
+
/* From 6.3.1 RTO Calculation:
*
* C1) Until an RTT measurement has been made for a packet sent to the
diff --git a/net/sctp/tsnmap.c b/net/sctp/tsnmap.c
index f1e40ceb..b5fb7c40 100644
--- a/net/sctp/tsnmap.c
+++ b/net/sctp/tsnmap.c
@@ -114,7 +114,8 @@
/* Mark this TSN as seen. */
-int sctp_tsnmap_mark(struct sctp_tsnmap *map, __u32 tsn)
+int sctp_tsnmap_mark(struct sctp_tsnmap *map, __u32 tsn,
+ struct sctp_transport *trans)
{
u16 gap;
@@ -133,6 +134,9 @@
*/
map->max_tsn_seen++;
map->cumulative_tsn_ack_point++;
+ if (trans)
+ trans->sack_generation =
+ trans->asoc->peer.sack_generation;
map->base_tsn++;
} else {
/* Either we already have a gap, or about to record a gap, so
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index 8a84017..33d8947 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -715,7 +715,8 @@
* can mark it as received so the tsn_map is updated correctly.
*/
if (sctp_tsnmap_mark(&asoc->peer.tsn_map,
- ntohl(chunk->subh.data_hdr->tsn)))
+ ntohl(chunk->subh.data_hdr->tsn),
+ chunk->transport))
goto fail_mark;
/* First calculate the padding, so we don't inadvertently
diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c
index f2d1de7..f5a6a4f 100644
--- a/net/sctp/ulpqueue.c
+++ b/net/sctp/ulpqueue.c
@@ -1051,7 +1051,7 @@
if (chunk && (freed >= needed)) {
__u32 tsn;
tsn = ntohl(chunk->subh.data_hdr->tsn);
- sctp_tsnmap_mark(&asoc->peer.tsn_map, tsn);
+ sctp_tsnmap_mark(&asoc->peer.tsn_map, tsn, chunk->transport);
sctp_ulpq_tail_data(ulpq, chunk, gfp);
sctp_ulpq_partial_delivery(ulpq, chunk, gfp);
diff --git a/security/security.c b/security/security.c
index 3efc9b1..860aeb3 100644
--- a/security/security.c
+++ b/security/security.c
@@ -23,6 +23,7 @@
#include <linux/mman.h>
#include <linux/mount.h>
#include <linux/personality.h>
+#include <linux/backing-dev.h>
#include <net/flow.h>
#define MAX_LSM_EVM_XATTR 2
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 5ccf10a..aa4c25e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6688,6 +6688,31 @@
{}
};
+static void alc662_fill_coef(struct hda_codec *codec)
+{
+ int val, coef;
+
+ coef = alc_get_coef0(codec);
+
+ switch (codec->vendor_id) {
+ case 0x10ec0662:
+ if ((coef & 0x00f0) == 0x0030) {
+ val = alc_read_coef_idx(codec, 0x4); /* EAPD Ctrl */
+ alc_write_coef_idx(codec, 0x4, val & ~(1<<10));
+ }
+ break;
+ case 0x10ec0272:
+ case 0x10ec0273:
+ case 0x10ec0663:
+ case 0x10ec0665:
+ case 0x10ec0670:
+ case 0x10ec0671:
+ case 0x10ec0672:
+ val = alc_read_coef_idx(codec, 0xd); /* EAPD Ctrl */
+ alc_write_coef_idx(codec, 0xd, val | (1<<14));
+ break;
+ }
+}
/*
*/
@@ -6707,6 +6732,9 @@
alc_fix_pll_init(codec, 0x20, 0x04, 15);
+ spec->init_hook = alc662_fill_coef;
+ alc662_fill_coef(codec);
+
alc_pick_fixup(codec, alc662_fixup_models,
alc662_fixup_tbl, alc662_fixups);
alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 64d2a4f..e9b62b5 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -935,9 +935,7 @@
}
found:
- data = snd_soc_read(codec, AIC3X_PLL_PROGA_REG);
- snd_soc_write(codec, AIC3X_PLL_PROGA_REG,
- data | (pll_p << PLLP_SHIFT));
+ snd_soc_update_bits(codec, AIC3X_PLL_PROGA_REG, PLLP_MASK, pll_p);
snd_soc_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG,
pll_r << PLLR_SHIFT);
snd_soc_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT);
diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
index 6f097fb..08c7f66 100644
--- a/sound/soc/codecs/tlv320aic3x.h
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -166,6 +166,7 @@
/* PLL registers bitfields */
#define PLLP_SHIFT 0
+#define PLLP_MASK 7
#define PLLQ_SHIFT 3
#define PLLR_SHIFT 0
#define PLLJ_SHIFT 2
diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c
index acbdc5f..32682c1 100644
--- a/sound/soc/codecs/wm2200.c
+++ b/sound/soc/codecs/wm2200.c
@@ -1491,6 +1491,7 @@
static int wm2200_bclk_rates_cd[WM2200_NUM_BCLK_RATES] = {
5644800,
+ 3763200,
2882400,
1881600,
1411200,
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig
index c1c8e95..76dc230 100644
--- a/sound/soc/tegra/Kconfig
+++ b/sound/soc/tegra/Kconfig
@@ -58,17 +58,9 @@
Say Y or M here if you want to add support for SoC audio on Tegra
boards using the WM8753 codec, such as Whistler.
-config MACH_HAS_SND_SOC_TEGRA_WM8903
- bool
- help
- Machines that use the SND_SOC_TEGRA_WM8903 driver should select
- this config option, in order to allow the user to enable
- SND_SOC_TEGRA_WM8903.
-
config SND_SOC_TEGRA_WM8903
tristate "SoC Audio support for Tegra boards using a WM8903 codec"
depends on SND_SOC_TEGRA && I2C
- depends on MACH_HAS_SND_SOC_TEGRA_WM8903
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_WM8903
@@ -79,7 +71,7 @@
config SND_SOC_TEGRA_TRIMSLICE
tristate "SoC Audio support for TrimSlice board"
- depends on SND_SOC_TEGRA && MACH_TRIMSLICE && I2C
+ depends on SND_SOC_TEGRA && I2C
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_TLV320AIC23
help
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index f59c1e8..7d7e2aa 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -198,7 +198,7 @@
}
static int
-kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi)
+kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args)
{
struct kvm_irq_routing_table *irq_rt;
struct _irqfd *irqfd, *tmp;
@@ -212,12 +212,12 @@
return -ENOMEM;
irqfd->kvm = kvm;
- irqfd->gsi = gsi;
+ irqfd->gsi = args->gsi;
INIT_LIST_HEAD(&irqfd->list);
INIT_WORK(&irqfd->inject, irqfd_inject);
INIT_WORK(&irqfd->shutdown, irqfd_shutdown);
- file = eventfd_fget(fd);
+ file = eventfd_fget(args->fd);
if (IS_ERR(file)) {
ret = PTR_ERR(file);
goto fail;
@@ -298,19 +298,19 @@
* shutdown any irqfd's that match fd+gsi
*/
static int
-kvm_irqfd_deassign(struct kvm *kvm, int fd, int gsi)
+kvm_irqfd_deassign(struct kvm *kvm, struct kvm_irqfd *args)
{
struct _irqfd *irqfd, *tmp;
struct eventfd_ctx *eventfd;
- eventfd = eventfd_ctx_fdget(fd);
+ eventfd = eventfd_ctx_fdget(args->fd);
if (IS_ERR(eventfd))
return PTR_ERR(eventfd);
spin_lock_irq(&kvm->irqfds.lock);
list_for_each_entry_safe(irqfd, tmp, &kvm->irqfds.items, list) {
- if (irqfd->eventfd == eventfd && irqfd->gsi == gsi) {
+ if (irqfd->eventfd == eventfd && irqfd->gsi == args->gsi) {
/*
* This rcu_assign_pointer is needed for when
* another thread calls kvm_irq_routing_update before
@@ -338,12 +338,15 @@
}
int
-kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
+kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args)
{
- if (flags & KVM_IRQFD_FLAG_DEASSIGN)
- return kvm_irqfd_deassign(kvm, fd, gsi);
+ if (args->flags & ~KVM_IRQFD_FLAG_DEASSIGN)
+ return -EINVAL;
- return kvm_irqfd_assign(kvm, fd, gsi);
+ if (args->flags & KVM_IRQFD_FLAG_DEASSIGN)
+ return kvm_irqfd_deassign(kvm, args);
+
+ return kvm_irqfd_assign(kvm, args);
}
/*
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 7e14068..44ee712 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -2047,7 +2047,7 @@
r = -EFAULT;
if (copy_from_user(&data, argp, sizeof data))
goto out;
- r = kvm_irqfd(kvm, data.fd, data.gsi, data.flags);
+ r = kvm_irqfd(kvm, &data);
break;
}
case KVM_IOEVENTFD: {
@@ -2845,6 +2845,7 @@
kvm_arch_hardware_unsetup();
kvm_arch_exit();
free_cpumask_var(cpus_hardware_enabled);
+ __free_page(fault_page);
__free_page(hwpoison_page);
__free_page(bad_page);
}
