/* Driver for USB Mass Storage compliant devices
 * Unusual Devices File
 *
 * Current development and maintenance by:
 *   (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
 *
 * Initial work by:
 *   (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc.
 *
 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
 * information about this driver.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 */

/* IMPORTANT NOTE: This file must be included in another file which does
 * the following thing for it to work:
 * The macro UNUSUAL_DEV() must be defined before this file is included
 */

/* If you edit this file, please try to keep it sorted first by VendorID,
 * then by ProductID.
 *
 * If you want to add an entry for this file, be sure to include the
 * following information:
 *	- a patch that adds the entry for your device, including your
 *	  email address right above the entry (plus maybe a brief
 *	  explanation of the reason for the entry),
 *	- a copy of /proc/bus/usb/devices with your device plugged in
 *	  running with this patch.
 * Send your submission to either Phil Dibowitz <phil@ipom.com> or
 * Alan Stern <stern@rowland.harvard.edu>, and don't forget to CC: the
 * USB development list <linux-usb@vger.kernel.org> and the USB storage list
 * <usb-storage@lists.one-eyed-alien.net>
 */

/* patch submitted by Vivian Bregier <Vivian.Bregier@imag.fr>
 */
UNUSUAL_DEV(  0x03eb, 0x2002, 0x0100, 0x0100,
		"ATMEL",
		"SND1 Storage",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE),

/* modified by Tobias Lorenz <tobias.lorenz@gmx.net> */
UNUSUAL_DEV(  0x03ee, 0x6901, 0x0000, 0x0200,
		"Mitsumi",
		"USB FDD",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

/* Reported by Rodolfo Quesada <rquesada@roqz.net> */
UNUSUAL_DEV(  0x03ee, 0x6906, 0x0003, 0x0003,
		"VIA Technologies Inc.",
		"Mitsumi multi cardreader",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

UNUSUAL_DEV(  0x03f0, 0x0107, 0x0200, 0x0200,
		"HP",
		"CD-Writer+",
		US_SC_8070, US_PR_CB, NULL, 0),

#ifdef CONFIG_USB_STORAGE_USBAT
UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
		"HP",
		"CD-Writer+ 8200e",
		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),

UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
		"HP",
		"CD-Writer+ CD-4e",
		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
#endif

/* Reported by Grant Grundler <grundler@parisc-linux.org>
 * HP r707 camera in "Disk" mode with 2.00.23 or 2.00.24 firmware.
 */
UNUSUAL_DEV(  0x03f0, 0x4002, 0x0001, 0x0001,
		"HP",
		"PhotoSmart R707",
		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),

/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
 * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
 * for USB floppies that need the SINGLE_LUN enforcement.
 */
UNUSUAL_DEV(  0x0409, 0x0040, 0x0000, 0x9999,
		"NEC",
		"NEC USB UF000x",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
UNUSUAL_DEV(  0x040d, 0x6205, 0x0003, 0x0003,
		"VIA Technologies Inc.",
		"USB 2.0 Card Reader",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
 * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message
 * always fails and confuses drive.
 */
UNUSUAL_DEV(  0x0411, 0x001c, 0x0113, 0x0113,
		"Buffalo",
		"DUB-P40G HDD",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),

/* Submitted by Ernestas Vaiciukevicius <ernisv@gmail.com> */
UNUSUAL_DEV(  0x0419, 0x0100, 0x0100, 0x0100,
		"Samsung Info. Systems America, Inc.",
		"MP3 Player",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Orgad Shaneh <orgads@gmail.com> */
UNUSUAL_DEV(  0x0419, 0xaace, 0x0100, 0x0100,
		"Samsung", "MP3 Player",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Christian Leber <christian@leber.de> */
UNUSUAL_DEV(  0x0419, 0xaaf5, 0x0100, 0x0100,
		"TrekStor",
		"i.Beat 115 2.0",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),

/* Reported by Stefan Werner <dustbln@gmx.de> */
UNUSUAL_DEV(  0x0419, 0xaaf6, 0x0100, 0x0100,
		"TrekStor",
		"i.Beat Joy 2.0",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Pete Zaitcev <zaitcev@redhat.com>, bz#176584 */
UNUSUAL_DEV(  0x0420, 0x0001, 0x0100, 0x0100,
		"GENERIC", "MP3 PLAYER", /* MyMusix PD-205 on the outside. */
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Andrew Nayenko <relan@bk.ru> */
UNUSUAL_DEV(  0x0421, 0x0019, 0x0592, 0x0592,
		"Nokia",
		"Nokia 6288",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_MAX_SECTORS_64 ),

/* Reported by Filip Joelsson <filip@blueturtle.nu> */
UNUSUAL_DEV(  0x0421, 0x005d, 0x0001, 0x0600,
		"Nokia",
		"Nokia 3110c",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

/* Reported by Mario Rettig <mariorettig@web.de> */
UNUSUAL_DEV(  0x0421, 0x042e, 0x0100, 0x0100,
		"Nokia",
		"Nokia 3250",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),

/* Reported by <honkkis@gmail.com> */
UNUSUAL_DEV(  0x0421, 0x0433, 0x0100, 0x0100,
		"Nokia",
		"E70",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),

/* Reported by Jon Hart <Jon.Hart@web.de> */
UNUSUAL_DEV(  0x0421, 0x0434, 0x0100, 0x0100,
		"Nokia",
		"E60",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),

/* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and
 * Einar Th. Einarsson <einarthered@gmail.com> */
UNUSUAL_DEV(  0x0421, 0x0444, 0x0100, 0x0100,
		"Nokia",
		"N91",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),

/* Reported by Jiri Slaby <jirislaby@gmail.com> and
 * Rene C. Castberg <Rene@Castberg.org> */
UNUSUAL_DEV(  0x0421, 0x0446, 0x0100, 0x0100,
		"Nokia",
		"N80",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),

/* Reported by Matthew Bloch <matthew@bytemark.co.uk> */
UNUSUAL_DEV(  0x0421, 0x044e, 0x0100, 0x0100,
		"Nokia",
		"E61",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),

/* Reported by Bardur Arantsson <bardur@scientician.net> */
UNUSUAL_DEV(  0x0421, 0x047c, 0x0370, 0x0610,
		"Nokia",
		"6131",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_MAX_SECTORS_64 ),

/* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452,
		"Nokia",
		"Nokia 6233",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_MAX_SECTORS_64 ),

/* Reported by Alex Corcoles <alex@corcoles.net> */
UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
		"Nokia",
		"6234",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_MAX_SECTORS_64 ),

/* Reported by Cedric Godin <cedric@belbone.be> */
UNUSUAL_DEV(  0x0421, 0x04b9, 0x0551, 0x0551,
		"Nokia",
		"5300",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

/* Reported by Richard Nauber <RichardNauber@web.de> */
UNUSUAL_DEV(  0x0421, 0x04fa, 0x0601, 0x0601,
		"Nokia",
		"6300",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

/* Patch for Nokia 5310 capacity */
UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
	"Nokia",
	"5310",
	US_SC_DEVICE, US_PR_DEVICE, NULL,
	US_FL_FIX_CAPACITY ),

/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
UNUSUAL_DEV(  0x0424, 0x0fdc, 0x0210, 0x0210,
		"SMSC",
		"FDC GOLD-2.30",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

#ifdef CONFIG_USB_STORAGE_DPCM
UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
		"Microtech",
		"CameraMate (DPCM_USB)",
 		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
#endif

/* Patch submitted by Daniel Drake <dsd@gentoo.org>
 * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
UNUSUAL_DEV(  0x0451, 0x5416, 0x0100, 0x0100,
		"Neuros Audio",
		"USB 2.0 HD 2.5",
		US_SC_DEVICE, US_PR_BULK, NULL,
		US_FL_NEED_OVERRIDE ),

/*
 * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
 * The key does not actually break, but it returns zero sense which
 * makes our SCSI stack to print confusing messages.
 */
UNUSUAL_DEV(  0x0457, 0x0150, 0x0100, 0x0100,
		"USBest Technology",	/* sold by Transcend */
		"USB Mass Storage Device",
		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),

/*
* Bohdan Linda <bohdan.linda@gmail.com>
* 1GB USB sticks MyFlash High Speed. I have restricted
* the revision to my model only
*/
UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
		"USB 2.0",
		"Flash Disk",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_NOT_LOCKABLE ),

#ifdef CONFIG_USB_STORAGE_KARMA
UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
		"Rio",
		"Rio Karma",
		US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
#endif

/*
 * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
 * Reported by Pete Zaitcev <zaitcev@redhat.com>
 * This device chokes on both version of MODE SENSE which we have, so
 * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
 */
UNUSUAL_DEV(  0x046b, 0xff40, 0x0100, 0x0100,
		"AMI",
		"Virtual Floppy",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_NO_WP_DETECT),

/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV(  0x0482, 0x0100, 0x0100, 0x0100,
		"Kyocera",
		"Finecam S3x",
		US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),

/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV(  0x0482, 0x0101, 0x0100, 0x0100,
		"Kyocera",
		"Finecam S4",
		US_SC_8070, US_PR_CB, NULL, US_FL_FIX_INQUIRY),

/* Patch submitted by Stephane Galles <stephane.galles@free.fr> */
UNUSUAL_DEV(  0x0482, 0x0103, 0x0100, 0x0100,
		"Kyocera",
		"Finecam S5",
		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),

/* Reported by Paul Stewart <stewart@wetlogic.net>
 * This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
		"Hitachi",
		"DVD-CAM DZ-MV100A Camcorder",
		US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN),

/* Patch for Nikon coolpix 2000
 * Submitted by Fabien Cosse <fabien.cosse@wanadoo.fr>*/
UNUSUAL_DEV(  0x04b0, 0x0301, 0x0010, 0x0010,
		"NIKON",
		"NIKON DSC E2000",
		US_SC_DEVICE, US_PR_DEVICE,NULL,
		US_FL_NOT_LOCKABLE ),

/* Reported by Stefan de Konink <skinkie@xs4all.nl> */
UNUSUAL_DEV(  0x04b0, 0x0401, 0x0200, 0x0200,
		"NIKON",
		"NIKON DSC D100",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

/* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */
UNUSUAL_DEV(  0x04b0, 0x0409, 0x0100, 0x0100,
		"NIKON",
		"NIKON DSC D50",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

/* Reported by Andreas Bockhold <andreas@bockionline.de> */
UNUSUAL_DEV(  0x04b0, 0x0405, 0x0100, 0x0100,
		"NIKON",
		"NIKON DSC D70",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

/* Reported by Jamie Kitson <jamie@staberinde.fsnet.co.uk> */
UNUSUAL_DEV(  0x04b0, 0x040d, 0x0100, 0x0100,
		"NIKON",
		"NIKON DSC D70s",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

/* Reported by Graber and Mike Pagano <mpagano-kernel@mpagano.com> */
UNUSUAL_DEV(  0x04b0, 0x040f, 0x0100, 0x0200,
		"NIKON",
		"NIKON DSC D200",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

/* Reported by Emil Larsson <emil@swip.net> */
UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0111,
		"NIKON",
		"NIKON DSC D80",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

/* Reported by Ortwin Glueck <odi@odi.ch> */
UNUSUAL_DEV(  0x04b0, 0x0413, 0x0110, 0x0111,
		"NIKON",
		"NIKON DSC D40",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

/* Reported by Paul Check <paul@openstreet.com> */
UNUSUAL_DEV(  0x04b0, 0x0415, 0x0100, 0x0100,
		"NIKON",
		"NIKON DSC D2Xs",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

/* Reported by Shan Destromp (shansan@gmail.com) */
UNUSUAL_DEV(  0x04b0, 0x0417, 0x0100, 0x0100,
		"NIKON",
		"NIKON DSC D40X",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

/* Reported by Doug Maxey (dwm@austin.ibm.com) */
UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
		"IBM",
		"IBM RSA2",
		US_SC_DEVICE, US_PR_CB, NULL,
		US_FL_MAX_SECTORS_MIN),

/* BENQ DC5330
 * Reported by Manuel Fombuena <mfombuena@ya.com> and
 * Frank Copeland <fjc@thingy.apana.org.au> */
UNUSUAL_DEV(  0x04a5, 0x3010, 0x0100, 0x0100,
		"Tekom Technologies, Inc",
		"300_CAMERA",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
/* CY7C68300 : support atacb */
UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
		"Cypress",
		"Cypress AT2LP",
		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
		0),

/* CY7C68310 : support atacb and atacb2 */
UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
		"Cypress",
		"Cypress ISD-300LP",
		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
		0),
#endif

/* Reported by Simon Levitt <simon@whattf.com>
 * This entry needs Sub and Proto fields */
UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
		"Epson",
		"875DC Storage",
		US_SC_SCSI, US_PR_CB, NULL, US_FL_FIX_INQUIRY),

/* Reported by Khalid Aziz <khalid@gonehiking.org>
 * This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x0110,
		"Epson",
		"785EPX Storage",
		US_SC_SCSI, US_PR_BULK, NULL, US_FL_SINGLE_LUN),

/* Not sure who reported this originally but
 * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
 * flag be added */
UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
		"Fujifilm",
		"FinePix 1400Zoom",
		US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),

/* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
 * The device needs the flags only.
 */
UNUSUAL_DEV(  0x04ce, 0x0002, 0x0074, 0x0074,
		"ScanLogic",
		"SL11R-IDE",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY),

/* Reported by Kriston Fincher <kriston@airmail.net>
 * Patch submitted by Sean Millichamp <sean@bruenor.org>
 * This is to support the Panasonic PalmCam PV-SD4090
 * This entry is needed because the device reports Sub=ff 
 */
UNUSUAL_DEV(  0x04da, 0x0901, 0x0100, 0x0200,
		"Panasonic",
		"LS-120 Camera",
		US_SC_UFI, US_PR_DEVICE, NULL, 0),

/* From Yukihiro Nakai, via zaitcev@yahoo.com.
 * This is needed for CB instead of CBI */
UNUSUAL_DEV(  0x04da, 0x0d05, 0x0000, 0x0000,
		"Sharp CE-CW05",
		"CD-R/RW Drive",
		US_SC_8070, US_PR_CB, NULL, 0),

/* Reported by Adriaan Penning <a.penning@luon.net> */
UNUSUAL_DEV(  0x04da, 0x2372, 0x0000, 0x9999,
		"Panasonic",
		"DMC-LCx Camera",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),

/* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
UNUSUAL_DEV(  0x04da, 0x2373, 0x0000, 0x9999,
		"LEICA",
		"D-LUX Camera",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),

/* Most of the following entries were developed with the help of
 * Shuttle/SCM directly.
 */
UNUSUAL_DEV(  0x04e6, 0x0001, 0x0200, 0x0200,
		"Matshita",
		"LS-120",
		US_SC_8020, US_PR_CB, NULL, 0),

UNUSUAL_DEV(  0x04e6, 0x0002, 0x0100, 0x0100,
		"Shuttle",
		"eUSCSI Bridge",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, 
		US_FL_SCM_MULT_TARG ),

#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
		"Sandisk",
		"ImageMate SDDR09",
		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
		0),

/* This entry is from Andries.Brouwer@cwi.nl */
UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
		"SCM Microsystems",
		"eUSB SmartMedia / CompactFlash Adapter",
		US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
		0),
#endif

/* Reported by Markus Demleitner <msdemlei@cl.uni-heidelberg.de> */
UNUSUAL_DEV(  0x04e6, 0x0006, 0x0100, 0x0100,
		"SCM Microsystems Inc.",
		"eUSB MMC Adapter",
		US_SC_SCSI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN),

/* Reported by Daniel Nouri <dpunktnpunkt@web.de> */
UNUSUAL_DEV(  0x04e6, 0x0006, 0x0205, 0x0205,
		"Shuttle",
		"eUSB MMC Adapter",
		US_SC_SCSI, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN),

UNUSUAL_DEV(  0x04e6, 0x0007, 0x0100, 0x0200,
		"Sony",
		"Hifd",
		US_SC_SCSI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN),

UNUSUAL_DEV(  0x04e6, 0x0009, 0x0200, 0x0200,
		"Shuttle",
		"eUSB ATA/ATAPI Adapter",
		US_SC_8020, US_PR_CB, NULL, 0),

UNUSUAL_DEV(  0x04e6, 0x000a, 0x0200, 0x0200,
		"Shuttle",
		"eUSB CompactFlash Adapter",
		US_SC_8020, US_PR_CB, NULL, 0),

UNUSUAL_DEV(  0x04e6, 0x000B, 0x0100, 0x0100,
		"Shuttle",
		"eUSCSI Bridge",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
		US_FL_SCM_MULT_TARG ), 

UNUSUAL_DEV(  0x04e6, 0x000C, 0x0100, 0x0100,
		"Shuttle",
		"eUSCSI Bridge",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
		US_FL_SCM_MULT_TARG ),

UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
		"Shuttle",
		"CD-RW Device",
		US_SC_8020, US_PR_CB, NULL, 0),

#ifdef CONFIG_USB_STORAGE_USBAT
UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
		"Shuttle/SCM",
		"USBAT-02",
		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
		US_FL_SINGLE_LUN),
#endif

/* Reported by Dmitry Khlystov <adminimus@gmail.com> */
UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
		"Samsung",
		"YP-U3",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_MAX_SECTORS_64),

/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
 * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
 * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
 */
UNUSUAL_DEV(  0x04fc, 0x80c2, 0x0100, 0x0100,
		"Kobian Mercury",
		"Binocam DCB-132",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_BULK32),

/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
		"Belkin",
		"USB SCSI Adaptor",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
		US_FL_SCM_MULT_TARG ),

/* Iomega Clik! Drive 
 * Reported by David Chatenay <dchatenay@hotmail.com>
 * The reason this is needed is not fully known.
 */
UNUSUAL_DEV(  0x0525, 0xa140, 0x0100, 0x0100,
		"Iomega",
		"USB Clik! 40",
		US_SC_8070, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),

/* Yakumo Mega Image 37
 * Submitted by Stephan Fuhrmann <atomenergie@t-online.de> */
UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
		"Tekom Technologies, Inc",
		"300_CAMERA",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Another Yakumo camera.
 * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
UNUSUAL_DEV(  0x052b, 0x1804, 0x0100, 0x0100,
		"Tekom Technologies, Inc",
		"300_CAMERA",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
UNUSUAL_DEV(  0x052b, 0x1807, 0x0100, 0x0100,
		"Tekom Technologies, Inc",
		"300_CAMERA",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Yakumo Mega Image 47
 * Reported by Bjoern Paetzel <kolrabi@kolrabi.de> */
UNUSUAL_DEV(  0x052b, 0x1905, 0x0100, 0x0100,
		"Tekom Technologies, Inc",
		"400_CAMERA",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Paul Ortyl <ortylp@3miasto.net>
 * Note that it's similar to the device above, only different prodID */
UNUSUAL_DEV(  0x052b, 0x1911, 0x0100, 0x0100,
		"Tekom Technologies, Inc",
		"400_CAMERA",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

UNUSUAL_DEV(  0x054c, 0x0010, 0x0106, 0x0450,
		"Sony",
		"DSC-S30/S70/S75/505V/F505/F707/F717/P8",
		US_SC_SCSI, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),

/* Submitted by Lars Jacob <jacob.lars@googlemail.com>
 * This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0610,
		"Sony",
		"DSC-T1/T5/H5",
		US_SC_8070, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),


/* Reported by wim@geeks.nl */
UNUSUAL_DEV(  0x054c, 0x0025, 0x0100, 0x0100,
		"Sony",
		"Memorystick NW-MS7",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
		"Sony",
		"Portable USB Harddrive V2",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),
#endif

/* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
UNUSUAL_DEV(  0x054c, 0x002c, 0x0501, 0x2000,
		"Sony",
		"USB Floppy Drive",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

UNUSUAL_DEV(  0x054c, 0x002d, 0x0100, 0x0100,
		"Sony",
		"Memorystick MSAC-US1",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

/* Submitted by Klaus Mueller <k.mueller@intershop.de> */
UNUSUAL_DEV(  0x054c, 0x002e, 0x0106, 0x0310,
		"Sony",
		"Handycam",
		US_SC_SCSI, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

/* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
UNUSUAL_DEV(  0x054c, 0x002e, 0x0500, 0x0500,
		"Sony",
		"Handycam HC-85",
		US_SC_UFI, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

UNUSUAL_DEV(  0x054c, 0x0032, 0x0000, 0x9999,
		"Sony",
		"Memorystick MSC-U01N",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

/* Submitted by Michal Mlotek <mlotek@foobar.pl> */
UNUSUAL_DEV(  0x054c, 0x0058, 0x0000, 0x9999,
		"Sony",
		"PEG N760c Memorystick",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),
		
UNUSUAL_DEV(  0x054c, 0x0069, 0x0000, 0x9999,
		"Sony",
		"Memorystick MSC-U03",
		US_SC_UFI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN ),

/* Submitted by Nathan Babb <nathan@lexi.com> */
UNUSUAL_DEV(  0x054c, 0x006d, 0x0000, 0x9999,
		"Sony",
		"PEG Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),

/* Submitted by Mike Alborn <malborn@deandra.homeip.net> */
UNUSUAL_DEV(  0x054c, 0x016a, 0x0000, 0x9999,
		"Sony",
		"PEG Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),
		
/* Submitted by Frank Engel <frankie@cse.unsw.edu.au> */
UNUSUAL_DEV(  0x054c, 0x0099, 0x0000, 0x9999,
		"Sony",
		"PEG Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),

/* floppy reports multiple luns */
UNUSUAL_DEV(  0x055d, 0x2020, 0x0000, 0x0210,
		"SAMSUNG",
		"SFD-321U [FW 0C]",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

		
UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299,
		"Y-E Data",
		"Flashbuster-U",
		US_SC_DEVICE,  US_PR_CB, NULL,
		US_FL_SINGLE_LUN),

UNUSUAL_DEV(  0x057b, 0x0000, 0x0300, 0x9999,
		"Y-E Data",
		"Flashbuster-U",
		US_SC_DEVICE,  US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN),

/* Reported by Johann Cardon <johann.cardon@free.fr>
 * This entry is needed only because the device reports
 * bInterfaceClass = 0xff (vendor-specific)
 */
UNUSUAL_DEV(  0x057b, 0x0022, 0x0000, 0x9999,
		"Y-E Data",
		"Silicon Media R/W",
		US_SC_DEVICE, US_PR_DEVICE, NULL, 0),

#ifdef CONFIG_USB_STORAGE_ALAUDA
UNUSUAL_DEV(  0x0584, 0x0008, 0x0102, 0x0102,
		"Fujifilm",
		"DPC-R1 (Alauda)",
 		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
#endif

/* Reported by RTE <raszilki@yandex.ru> */
UNUSUAL_DEV(  0x058f, 0x6387, 0x0141, 0x0141,
		"JetFlash",
		"TS1GJF2A/120",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_MAX_SECTORS_64 ),

/* Fabrizio Fellini <fello@libero.it> */
UNUSUAL_DEV(  0x0595, 0x4343, 0x0000, 0x2210,
		"Fujifilm",
		"Digital Camera EX-20 DSC",
		US_SC_8070, US_PR_DEVICE, NULL, 0 ),

/* Reported by Andre Welter <a.r.welter@gmx.de>
 * This antique device predates the release of the Bulk-only Transport
 * spec, and if it gets a Get-Max-LUN then it requires the host to do a
 * Clear-Halt on the bulk endpoints.  The SINGLE_LUN flag will prevent
 * us from sending the request.
 */
UNUSUAL_DEV(  0x059b, 0x0001, 0x0100, 0x0100,
		"Iomega",
		"ZIP 100",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

/* Reported by <Hendryk.Pfeiffer@gmx.de> */
UNUSUAL_DEV(  0x059f, 0x0643, 0x0000, 0x0000,
		"LaCie",
		"DVD+-RW",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_GO_SLOW ),

/* Submitted by Joel Bourquard <numlock@freesurf.ch>
 * Some versions of this device need the SubClass and Protocol overrides
 * while others don't.
 */
UNUSUAL_DEV(  0x05ab, 0x0060, 0x1104, 0x1110,
		"In-System",
		"PyroGate External CD-ROM Enclosure (FCD-523)",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_NEED_OVERRIDE ),

#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
		"In-System",
		"USB/IDE Bridge (ATA/ATAPI)",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),

UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
		"In-System",
		"Portable USB Harddrive V2",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),

UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
		"In-System",
		"Portable USB Harddrive V2",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),

UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
		"In-System",
		"USB Storage Adapter V2",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),
#endif

/* Submitted by Sven Anderson <sven-linux@anderson.de>
 * There are at least four ProductIDs used for iPods, so I added 0x1202 and
 * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears
 * to change with firmware updates, I changed the range to maximum for all
 * iPod entries.
 */
UNUSUAL_DEV( 0x05ac, 0x1202, 0x0000, 0x9999,
		"Apple",
		"iPod",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

/* Reported by Avi Kivity <avi@argo.co.il> */
UNUSUAL_DEV( 0x05ac, 0x1203, 0x0000, 0x9999,
		"Apple",
		"iPod",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

UNUSUAL_DEV( 0x05ac, 0x1204, 0x0000, 0x9999,
		"Apple",
		"iPod",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),

UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
		"Apple",
		"iPod",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

/*
 * Reported by Tyson Vinson <lornoss@gmail.com>
 * This particular productId is the iPod Nano
 */
UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
		"Apple",
		"iPod",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

#ifdef CONFIG_USB_STORAGE_JUMPSHOT
UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
		"Lexar",
		"Jumpshot USB CF Reader",
		US_SC_SCSI, US_PR_JUMPSHOT, NULL,
		US_FL_NEED_OVERRIDE ),
#endif

/* Reported by Blake Matheny <bmatheny@purdue.edu> */
UNUSUAL_DEV(  0x05dc, 0xb002, 0x0000, 0x0113,
		"Lexar",
		"USB CF Reader",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),

/* The following two entries are for a Genesys USB to IDE
 * converter chip, but it changes its ProductId depending
 * on whether or not a disk or an optical device is enclosed
 * They were originally reported by Alexander Oltu
 * <alexander@all-2.com> and Peter Marks <peter.marks@turner.com>
 * respectively.
 *
 * US_FL_GO_SLOW and US_FL_MAX_SECTORS_64 added by Phil Dibowitz
 * <phil@ipom.com> as these flags were made and hard-coded
 * special-cases were pulled from scsiglue.c.
 */
UNUSUAL_DEV(  0x05e3, 0x0701, 0x0000, 0xffff,
		"Genesys Logic",
		"USB to IDE Optical",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),

UNUSUAL_DEV(  0x05e3, 0x0702, 0x0000, 0xffff,
		"Genesys Logic",
		"USB to IDE Disk",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),

/* Reported by Hanno Boeck <hanno@gmx.de>
 * Taken from the Lycoris Kernel */
UNUSUAL_DEV(  0x0636, 0x0003, 0x0000, 0x9999,
		"Vivitar",
		"Vivicam 35Xx",
		US_SC_SCSI, US_PR_BULK, NULL,
		US_FL_FIX_INQUIRY ),

UNUSUAL_DEV(  0x0644, 0x0000, 0x0100, 0x0100,
		"TEAC",
		"Floppy Drive",
		US_SC_UFI, US_PR_CB, NULL, 0 ),

#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
		"Olympus",
		"Camedia MAUSB-2",
		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
		0),
#endif

/* Reported by Darsen Lu <darsen@micro.ee.nthu.edu.tw> */
UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001,
		"SigmaTel",
		"USBMSC Audio Player",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

/* Reported by Richard -=[]=- <micro_flyer@hotmail.com> */
UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100,
		"Prolific Technology Inc.",
		"Mass Storage Device",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),

/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0001,
		"Prolific Technology Inc.",
		"ATAPI-6 Bridge Controller",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY | US_FL_GO_SLOW ),

/* Submitted by Benny Sjostrand <benny@hostmobility.com> */
UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
		"Minolta",
		"Dimage F300",
		US_SC_SCSI, US_PR_BULK, NULL, 0 ),

/* Reported by Miguel A. Fosas <amn3s1a@ono.com> */
UNUSUAL_DEV(  0x0686, 0x4017, 0x0001, 0x0001,
		"Minolta",
		"DIMAGE E223",
		US_SC_SCSI, US_PR_DEVICE, NULL, 0 ),

UNUSUAL_DEV(  0x0693, 0x0005, 0x0100, 0x0100,
		"Hagiwara",
		"Flashgate",
		US_SC_SCSI, US_PR_BULK, NULL, 0 ),

/* Reported by David Hamilton <niftimusmaximus@lycos.com> */
UNUSUAL_DEV(  0x069b, 0x3004, 0x0001, 0x0001,
		"Thomson Multimedia Inc.",
		"RCA RD1080 MP3 Player",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */
UNUSUAL_DEV(  0x071b, 0x3203, 0x0000, 0x0000,
		"RockChip",
		"MP3",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),

/* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
 * This USB MP3/AVI player device fails and disconnects if more than 128
 * sectors (64kB) are read/written in a single command, and may be present
 * at least in the following products:
 *   "Magnex Digital Video Panel DVP 1800"
 *   "MP4 AIGO 4GB SLOT SD"
 *   "Teclast TL-C260 MP3"
 *   "i.Meizu PMP MP3/MP4"
 *   "Speed MV8 MP4 Audio Player"
 */
UNUSUAL_DEV(  0x071b, 0x3203, 0x0100, 0x0100,
		"RockChip",
		"ROCK MP3",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_MAX_SECTORS_64),

/* Reported by Olivier Blondeau <zeitoun@gmail.com> */
UNUSUAL_DEV(  0x0727, 0x0306, 0x0100, 0x0100,
		"ATMEL",
		"SND1 Storage",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE),

/* Submitted by Roman Hodek <roman@hodek.net> */
UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200,
		"Sandisk",
		"ImageMate SDDR-05a",
		US_SC_SCSI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN ),

UNUSUAL_DEV(  0x0781, 0x0002, 0x0009, 0x0009,
		"SanDisk Corporation",
		"ImageMate CompactFlash USB",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

#ifdef CONFIG_USB_STORAGE_USBAT
UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
		"Sandisk",
		"ImageMate SDDR-05b",
		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
		US_FL_SINGLE_LUN ),
#endif

UNUSUAL_DEV(  0x0781, 0x0100, 0x0100, 0x0100,
		"Sandisk",
		"ImageMate SDDR-12",
		US_SC_SCSI, US_PR_CB, NULL,
		US_FL_SINGLE_LUN ),

#ifdef CONFIG_USB_STORAGE_SDDR09
UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
		"Sandisk",
		"ImageMate SDDR-09",
		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
		0),
#endif

#ifdef CONFIG_USB_STORAGE_FREECOM
UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
		"Freecom",
		"USB-IDE",
		US_SC_QIC, US_PR_FREECOM, freecom_init, 0),
#endif

/* Reported by Eero Volotinen <eero@ping-viini.org> */
UNUSUAL_DEV(  0x07ab, 0xfccd, 0x0000, 0x9999,
		"Freecom Technologies",
		"FHD-Classic",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133,
		"Microtech",
		"USB-SCSI-DB25",
		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
		US_FL_SCM_MULT_TARG ), 

UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,
		"Microtech",
		"USB-SCSI-HD50",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
		US_FL_SCM_MULT_TARG ),

#ifdef CONFIG_USB_STORAGE_DPCM
UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
		"Microtech",
		"CameraMate (DPCM_USB)",
 		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
#endif

#ifdef CONFIG_USB_STORAGE_ALAUDA
UNUSUAL_DEV(  0x07b4, 0x010a, 0x0102, 0x0102,
		"Olympus",
		"MAUSB-10 (Alauda)",
 		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
#endif

#ifdef CONFIG_USB_STORAGE_DATAFAB
UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
		"Datafab",
		"MDCFE-B USB CF Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		0 ),

/*
 * The following Datafab-based devices may or may not work
 * using the current driver...the 0xffff is arbitrary since I
 * don't know what device versions exist for these guys.
 *
 * The 0xa003 and 0xa004 devices in particular I'm curious about.
 * I'm told they exist but so far nobody has come forward to say that
 * they work with this driver.  Given the success we've had getting
 * other Datafab-based cards operational with this driver, I've decided
 * to leave these two devices in the list.
 */
UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
		"SIIG/Datafab",
		"SIIG/Datafab Memory Stick+CF Reader/Writer",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		0 ),

/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
		"Datafab/Unknown",
		"MD2/MD3 Disk enclosure",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_SINGLE_LUN ),

UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
		"Datafab/Unknown",
		"Datafab-based Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		0 ),

UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
		"Datafab/Unknown",
		"Datafab-based Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		0 ),

UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
		"PNY/Datafab",
		"PNY/Datafab CF+SM Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		0 ),

UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
		"Simple Tech/Datafab",
		"Simple Tech/Datafab CF+SM Reader",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		0 ),
#endif
		
#ifdef CONFIG_USB_STORAGE_SDDR55
/* Contributed by Peter Waechtler */
UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
		"Datafab",
		"MDSM-B reader",
		US_SC_SCSI, US_PR_SDDR55, NULL,
		US_FL_FIX_INQUIRY ),
#endif

#ifdef CONFIG_USB_STORAGE_DATAFAB
/* Submitted by Olaf Hering <olh@suse.de> */
UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
		"Datafab Systems, Inc.",
		"USB to CF + SM Combo (LC1)",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		0 ),
#endif
#ifdef CONFIG_USB_STORAGE_SDDR55
/* SM part - aeb <Andries.Brouwer@cwi.nl> */
UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
		"Datafab Systems, Inc.",
		"USB to CF + SM Combo (LC1)",
		US_SC_SCSI, US_PR_SDDR55, NULL,
		US_FL_SINGLE_LUN ),
#endif

#ifdef CONFIG_USB_STORAGE_DATAFAB
/* Reported by Felix Moeller <felix@derklecks.de>
 * in Germany this is sold by Hama with the productnumber 46952
 * as "DualSlot CompactFlash(TM) & MStick Drive USB"
 */
UNUSUAL_DEV(  0x07c4, 0xa10b, 0x0000, 0xffff,
		"DataFab Systems Inc.",
		"USB CF+MS",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		0 ),

#endif

/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
 * Only revision 1.13 tested (same for all of the above devices,
 * based on the Datafab DF-UG-07 chip).  Needed for US_FL_FIX_INQUIRY.
 * Submitted by Marek Michalkiewicz <marekm@amelek.gda.pl>.
 * See also http://martin.wilck.bei.t-online.de/#kecf .
 */
UNUSUAL_DEV(  0x07c4, 0xa400, 0x0000, 0xffff,
		"Datafab",
		"KECF-USB",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),

/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
		"Simple Tech/Datafab",
		"CF+SM Reader",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
 * to the USB storage specification in two ways:
 * - They tell us they are using transport protocol CBI. In reality they
 *   are using transport protocol CB.
 * - They don't like the INQUIRY command. So we must handle this command
 *   of the SCSI layer ourselves.
 * - Some cameras with idProduct=0x1001 and bcdDevice=0x1000 have
 *   bInterfaceProtocol=0x00 (US_PR_CBI) while others have 0x01 (US_PR_CB).
 *   So don't remove the US_PR_CB override!
 * - Cameras with bcdDevice=0x9009 require the US_SC_8070 override.
 */
UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9999,
		"Casio",
		"QV DigitalCamera",
		US_SC_8070, US_PR_CB, NULL,
		US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),

/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
		"Samsung",
		"Digimax 410",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY),

/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
 * Flag will support Bulk devices which use a standards-violating 32-byte
 * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
 * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
 */

UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
		"Grandtech",
		"DC2MEGA",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_BULK32),

/* Andrew Lunn <andrew@lunn.ch>
 * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
 * on LUN 4.
 * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
*/
UNUSUAL_DEV(  0x0851, 0x1543, 0x0200, 0x0200,
		"PanDigital",
		"Photo Frame",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_NOT_LOCKABLE),

/* Andrew Lunn <andrew@lunn.ch>
 * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL
 * on LUN 4.
 * Note: Vend:Prod clash with "Ltd Maxell WS30 Slim Digital Camera"
*/
UNUSUAL_DEV(  0x0851, 0x1543, 0x0200, 0x0200,
		"PanDigital",
		"Photo Frame",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_NOT_LOCKABLE),

/* Submitted by Jan De Luyck <lkml@kcore.org> */
UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
		"CITIZEN",
		"X1DE-USB",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN),

/* Submitted by Dylan Taft <d13f00l@gmail.com>
 * US_FL_IGNORE_RESIDUE Needed
 */
UNUSUAL_DEV(  0x08ca, 0x3103, 0x0100, 0x0100,
		"AIPTEK",
		"Aiptek USB Keychain MP3 Player",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE),

/* Entry needed for flags. Moreover, all devices with this ID use
 * bulk-only transport, but _some_ falsely report Control/Bulk instead.
 * One example is "Trumpion Digital Research MYMP3".
 * Submitted by Bjoern Brill <brill(at)fs.math.uni-frankfurt.de>
 */
UNUSUAL_DEV(  0x090a, 0x1001, 0x0100, 0x0100,
		"Trumpion",
		"t33520 USB Flash Card Controller",
		US_SC_DEVICE, US_PR_BULK, NULL,
		US_FL_NEED_OVERRIDE ),

/* Reported by Filippo Bardelli <filibard@libero.it>
 * The device reports a subclass of RBC, which is wrong.
 */
UNUSUAL_DEV(  0x090a, 0x1050, 0x0100, 0x0100,
		"Trumpion Microelectronics, Inc.",
		"33520 USB Digital Voice Recorder",
		US_SC_UFI, US_PR_DEVICE, NULL,
		0),

/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
		"Trumpion",
		"MP3 player",
		US_SC_RBC, US_PR_BULK, NULL,
		0 ),

/* aeb */
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
		"Feiya",
		"5-in-1 Card Reader",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

/* This Pentax still camera is not conformant
 * to the USB storage specification: -
 * - It does not like the INQUIRY command. So we must handle this command
 *   of the SCSI layer ourselves.
 * Tested on Rev. 10.00 (0x1000)
 * Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
 */
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
		"Pentax",
		"Optio 2/3/400",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),


/* Submitted by Per Winkvist <per.winkvist@uk.com> */
UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff,
		"Pentax",
		"Optio S/S4",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),

/* These are virtual windows driver CDs, which the zd1211rw driver
 * automatically converts into WLAN devices. */
UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101,
		"ZyXEL",
		"G-220F USB-WLAN Install",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_DEVICE ),

UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
		"SiteCom",
		"WL-117 USB-WLAN Install",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_DEVICE ),

/* Reported by F. Aben <f.aben@option.com>
 * This device (wrongly) has a vendor-specific device descriptor.
 * The entry is needed so usb-storage can bind to it's mass-storage
 * interface as an interface driver */
UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
		"Option",
		"GI 0401 SD-Card",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		0 ),

#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
		"ATI",
		"USB Cable 205",
		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
		0 ),
#endif

#ifdef CONFIG_USB_STORAGE_DATAFAB
UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
		"Acomdata",
		"CF",
		US_SC_SCSI, US_PR_DATAFAB, NULL,
		US_FL_SINGLE_LUN ),
#endif
#ifdef CONFIG_USB_STORAGE_SDDR55
UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
		"Acomdata",
		"SM",
		US_SC_SCSI, US_PR_SDDR55, NULL,
		US_FL_SINGLE_LUN ),
#endif

/* Submitted by: Nick Sillik <n.sillik@temple.edu>
 * Needed for OneTouch extension to usb-storage
 *
 */
#ifdef CONFIG_USB_STORAGE_ONETOUCH
	UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
			"Maxtor",
			"OneTouch External Harddrive",
			US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
			0),
	UNUSUAL_DEV(  0x0d49, 0x7010, 0x0000, 0x9999,
			"Maxtor",
			"OneTouch External Harddrive",
			US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
			0),
#endif

/*
 * Pete Zaitcev <zaitcev@yahoo.com>, bz#164688.
 * The device blatantly ignores LUN and returns 1 in GetMaxLUN.
 */
UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100,
		"Unknown",
		"Unknown",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_SINGLE_LUN ),

/* Submitted by Joris Struyve <joris@struyve.be> */
UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
		"Medion",
		"MD 7425",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY),

/*
 * Entry for Jenoptik JD 5200z3
 *
 * email: car.busse@gmx.de
 */
UNUSUAL_DEV(  0x0d96, 0x5200, 0x0001, 0x0200,
		"Jenoptik",
		"JD 5200 z3",
		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),

/* Reported by Lubomir Blaha <tritol@trilogic.cz>
 * I _REALLY_ don't know what 3rd, 4th number and all defines mean, but this
 * works for me. Can anybody correct these values? (I able to test corrected
 * version.)
 */
UNUSUAL_DEV( 0x0dd8, 0x1060, 0x0000, 0xffff,
		"Netac",
		"USB-CF-Card",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),

/* Reported by Edward Chapman (taken from linux-usb mailing list)
   Netac OnlyDisk Mini U2CV2 512MB USB 2.0 Flash Drive */
UNUSUAL_DEV( 0x0dd8, 0xd202, 0x0000, 0x9999,
		"Netac",
		"USB Flash Disk",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),


/* Patch by Stephan Walter <stephan.walter@epfl.ch>
 * I don't know why, but it works... */
UNUSUAL_DEV( 0x0dda, 0x0001, 0x0012, 0x0012,
		"WINWARD",
		"Music Disk",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Ian McConnell <ian at emit.demon.co.uk> */
UNUSUAL_DEV(  0x0dda, 0x0301, 0x0012, 0x0012,
		"PNP_MP3",
		"PNP_MP3 PLAYER",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
		"Cowon Systems",
		"iAUDIO M5",
		US_SC_DEVICE, US_PR_BULK, NULL,
		US_FL_NEED_OVERRIDE ),

/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
		"USB",
		"Solid state disk",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY ),

/* Submitted by Daniel Drake <dsd@gentoo.org>
 * Reported by dayul on the Gentoo Forums */
UNUSUAL_DEV(  0x0ea0, 0x2168, 0x0110, 0x0110,
		"Ours Technology",
		"Flash Disk",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
UNUSUAL_DEV(  0x0ea0, 0x6828, 0x0110, 0x0110,
		"USB",
		"Flash Disk",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Benjamin Schiller <sbenni@gmx.de>
 * It is also sold by Easylite as DJ 20 */
UNUSUAL_DEV(  0x0ed1, 0x7636, 0x0103, 0x0103,
		"Typhoon",
		"My DJ 1820",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE | US_FL_GO_SLOW | US_FL_MAX_SECTORS_64),

/* Patch by Leonid Petrov mail at lpetrov.net
 * Reported by Robert Spitzenpfeil <robert@spitzenpfeil.org>
 * http://www.qbik.ch/usb/devices/showdev.php?id=1705
 * Updated to 103 device by MJ Ray mjr at phonecoop.coop
 */
UNUSUAL_DEV(  0x0f19, 0x0103, 0x0100, 0x0100,
		"Oracom Co., Ltd",
		"ORC-200M",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* David Kuehling <dvdkhlng@gmx.de>:
 * for MP3-Player AVOX WSX-300ER (bought in Japan).  Reports lots of SCSI
 * errors when trying to write.
 */
UNUSUAL_DEV(  0x0f19, 0x0105, 0x0100, 0x0100,
		"C-MEX",
		"A-VOX",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Jeremy Katz <katzj@redhat.com>:
 * The Blackberry Pearl can run in two modes; a usb-storage only mode
 * and a mode that allows access via mass storage and to its database.
 * The berry_charge module will set the device to dual mode and thus we
 * should ignore its native mode if that module is built
 */
#ifdef CONFIG_USB_BERRY_CHARGE
UNUSUAL_DEV(  0x0fca, 0x0006, 0x0001, 0x0001,
		"RIM",
		"Blackberry Pearl",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_DEVICE ),
#endif

/* Reported by Michael Stattmann <michael@stattmann.com> */
UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
		"Sony Ericsson",
		"V800-Vodafone 802",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_NO_WP_DETECT ),

/* Reported by Jan Mate <mate@fiit.stuba.sk>
 * and by Soeren Sonnenburg <kernel@nn7.de> */
UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
		"Sony Ericsson",
		"P990i",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),

/* Reported by Ricardo Barberis <ricardo@dattatec.com> */
UNUSUAL_DEV(  0x0fce, 0xe092, 0x0000, 0x0000,
		"Sony Ericsson",
		"P1i",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x0000,
		"Sony Ericsson",
		"M600i",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),

/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
 * Tested on hardware version 1.10.
 * Entry is needed only for the initializer function override.
 * Devices with bcd > 110 seem to not need it while those
 * with bcd < 110 appear to need it.
 */
UNUSUAL_DEV(  0x1019, 0x0c55, 0x0000, 0x0110,
		"Desknote",
		"UCR-61S2B",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
		0 ),

/* Reported by Fabio Venturi <f.venturi@tdnet.it>
 * The device reports a vendor-specific bDeviceClass.
 */
UNUSUAL_DEV(  0x10d6, 0x2200, 0x0100, 0x0100,
		"Actions Semiconductor",
		"Mtp device",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		0),

/* Reported by Kevin Lloyd <linux@sierrawireless.com>
 * Entry is needed for the initializer function override,
 * which instructs the device to load as a modem
 * device.
 */
UNUSUAL_DEV(  0x1199, 0x0fff, 0x0000, 0x9999,
		"Sierra Wireless",
		"USB MMC Storage",
		US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init,
		0),

/* Reported by Jaco Kroon <jaco@kroon.co.za>
 * The usb-storage module found on the Digitech GNX4 (and supposedly other
 * devices) misbehaves and causes a bunch of invalid I/O errors.
 */
UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
		"Digitech HMG",
		"DigiTech Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by fangxiaozhi <huananhu@huawei.com>
 * This brings the HUAWEI data card devices into multi-port mode
 */
UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),
UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
		"HUAWEI MOBILE",
		"Mass Storage",
		US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
		0),

/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
UNUSUAL_DEV(  0x132b, 0x000b, 0x0001, 0x0001,
		"Minolta",
		"Dimage Z10",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		0 ),

/* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x0110,
		"SWISSBIT",
		"Black Silver",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Francesco Foresti <frafore@tiscali.it> */
UNUSUAL_DEV(  0x14cd, 0x6600, 0x0201, 0x0201,
		"Super Top",
		"IDE DEVICE",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Robert Schedel <r.schedel@yahoo.de>
 * Note: this is a 'super top' device like the above 14cd/6600 device */
UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
		"Teac",
		"HD-35PUK-B",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it>
 * This entry is needed to bypass the ZeroCD mechanism
 * and to properly load as a modem device.
 */
UNUSUAL_DEV(  0x19d2, 0x2000, 0x0000, 0x0000,
		"Onda ET502HS",
		"USB MMC Storage",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_DEVICE),

/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
 * and Renato Perini <rperini@email.it>
 */
UNUSUAL_DEV(  0x22b8, 0x3010, 0x0001, 0x0001,
		"Motorola",
		"RAZR V3x",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),

/*
 * Patch by Pete Zaitcev <zaitcev@redhat.com>
 * Report by Mark Patton. Red Hat bz#208928.
 * Added support for rev 0x0002 (Motorola ROKR W5)
 * by Javier Smaldone <javier@smaldone.com.ar>
 */
UNUSUAL_DEV(  0x22b8, 0x4810, 0x0001, 0x0002,
		"Motorola",
		"RAZR V3i/ROKR W5",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

/*
 * Patch by Jost Diederichs <jost@qdusa.com>
 */
UNUSUAL_DEV(0x22b8, 0x6410, 0x0001, 0x9999,
		"Motorola Inc.",
		"Motorola Phone (RAZRV3xx)",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY),

/*
 * Patch by Constantin Baranov <const@tltsu.ru>
 * Report by Andreas Koenecke.
 * Motorola ROKR Z6.
 */
UNUSUAL_DEV(  0x22b8, 0x6426, 0x0101, 0x0101,
		"Motorola",
		"MSnc.",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),

/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
UNUSUAL_DEV(  0x2735, 0x100b, 0x0000, 0x9999,
		"MPIO",
		"HS200",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_GO_SLOW ),

/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
UNUSUAL_DEV(  0x2770, 0x915d, 0x0010, 0x0010,
		"INTOVA",
		"Pixtreme",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_FIX_CAPACITY ),

/* Reported by Andrey Rahmatullin <wrar@altlinux.org> */
UNUSUAL_DEV(  0x4102, 0x1020, 0x0100,  0x0100,
		"iRiver",
		"MP3 T10",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_IGNORE_RESIDUE ),

/*
 * David Härdeman <david@2gen.com>
 * The key makes the SCSI stack print confusing (but harmless) messages
 */
UNUSUAL_DEV(  0x4146, 0xba01, 0x0100, 0x0100,
		"Iomega",
		"Micro Mini 1GB",
		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),

#ifdef CONFIG_USB_STORAGE_SDDR55
UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999, 
		"Sandisk",
		"ImageMate SDDR55",
		US_SC_SCSI, US_PR_SDDR55, NULL,
		US_FL_SINGLE_LUN),
#endif

/* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
		"DataStor",
		"USB4500 FW1.04",
		US_SC_DEVICE, US_PR_DEVICE, NULL,
		US_FL_CAPACITY_HEURISTICS),

/* Control/Bulk transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),

/* Control/Bulk/Interrupt transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),

/* Bulk-only transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),