aout: suppress A.OUT library support if !CONFIG_ARCH_SUPPORTS_AOUT
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set.
Not all architectures support the A.OUT binfmt, so the ELF binfmt should not
be permitted to go looking for A.OUT libraries to load in such a case. Not
only that, but under such conditions A.OUT core dumps are not produced either.
To make this work, this patch also does the following:
(1) Makes the existence of the contents of linux/a.out.h contingent on
CONFIG_ARCH_SUPPORTS_AOUT.
(2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT
core dumping code.
(3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline. This
is then included only where needed. This means that this bit of arch
code will be stored in the appropriate A.OUT binfmt module rather than
the core kernel.
(4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not
needed) and FRV.
This patch depends on the previous patch to move STACK_TOP[_MAX] out of
asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT
format is available.
[jdike@addtoit.com: uml: re-remove accidentally restored code]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 7c3d5f9..b5c3b61 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -61,7 +61,8 @@
config BINFMT_AOUT
tristate "Kernel support for a.out and ECOFF binaries"
- depends on X86_32 || ALPHA || ARM || M68K || SPARC32
+ depends on ARCH_SUPPORTS_AOUT && \
+ (X86_32 || ALPHA || ARM || M68K || SPARC32)
---help---
A.out (Assembler.OUTput) is a set of formats for libraries and
executables used in the earliest versions of UNIX. Linux used
diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c
index 7f65e71..a1bb224 100644
--- a/fs/binfmt_aout.c
+++ b/fs/binfmt_aout.c
@@ -28,6 +28,7 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/cacheflush.h>
+#include <asm/a.out-core.h>
static int load_aout_binary(struct linux_binprm *, struct pt_regs * regs);
static int load_aout_library(struct file*);
@@ -118,7 +119,7 @@
dump.u_ar0 = offsetof(struct user, regs);
#endif
dump.signal = signr;
- dump_thread(regs, &dump);
+ aout_dump_thread(regs, &dump);
/* If the size of the dump file exceeds the rlimit, then see what would happen
if we wrote the stack, but not the data area. */
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 111771d..a93b117 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -513,6 +513,7 @@
return error;
}
+#ifdef CONFIG_ARCH_SUPPORTS_AOUT
static unsigned long load_aout_interp(struct exec *interp_ex,
struct file *interpreter)
{
@@ -558,6 +559,14 @@
out:
return elf_entry;
}
+#else
+/* dummy extern - the function should never be called if !CONFIG_AOUT_BINFMT */
+static inline unsigned long load_aout_interp(struct exec *interp_ex,
+ struct file *interpreter)
+{
+ return -ELIBACC;
+}
+#endif
/*
* These are the functions used to load ELF style executables and shared
@@ -565,9 +574,15 @@
*/
#define INTERPRETER_NONE 0
-#define INTERPRETER_AOUT 1
#define INTERPRETER_ELF 2
+#ifdef CONFIG_ARCH_SUPPORTS_AOUT
+#define INTERPRETER_AOUT 1
+#define IS_AOUT_INTERP(x) ((x) == INTERPRETER_AOUT)
+#else
+#define IS_AOUT_INTERP(x) (0)
+#endif
+
#ifndef STACK_RND_MASK
#define STACK_RND_MASK (0x7ff >> (PAGE_SHIFT - 12)) /* 8MB of VA */
#endif
@@ -775,6 +790,7 @@
/* Some simple consistency checks for the interpreter */
if (elf_interpreter) {
static int warn;
+#ifdef CONFIG_ARCH_SUPPORTS_AOUT
interpreter_type = INTERPRETER_ELF | INTERPRETER_AOUT;
/* Now figure out which format our binary is */
@@ -782,11 +798,13 @@
(N_MAGIC(loc->interp_ex) != ZMAGIC) &&
(N_MAGIC(loc->interp_ex) != QMAGIC))
interpreter_type = INTERPRETER_ELF;
-
+#else
+ interpreter_type = INTERPRETER_ELF;
+#endif
if (memcmp(loc->interp_elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
interpreter_type &= ~INTERPRETER_ELF;
- if (interpreter_type == INTERPRETER_AOUT && warn < 10) {
+ if (IS_AOUT_INTERP(interpreter_type) && warn < 10) {
printk(KERN_WARNING "a.out ELF interpreter %s is "
"deprecated and will not be supported "
"after Linux 2.6.25\n", elf_interpreter);
@@ -815,7 +833,7 @@
/* OK, we are done with that, now set up the arg stuff,
and then start this sucker up */
- if ((!bprm->sh_bang) && (interpreter_type == INTERPRETER_AOUT)) {
+ if (IS_AOUT_INTERP(interpreter_type) && !bprm->sh_bang) {
char *passed_p = passed_fileno;
sprintf(passed_fileno, "%d", elf_exec_fileno);
@@ -1004,7 +1022,7 @@
}
if (elf_interpreter) {
- if (interpreter_type == INTERPRETER_AOUT) {
+ if (IS_AOUT_INTERP(interpreter_type)) {
elf_entry = load_aout_interp(&loc->interp_ex,
interpreter);
} else {
@@ -1045,7 +1063,7 @@
kfree(elf_phdata);
- if (interpreter_type != INTERPRETER_AOUT)
+ if (!IS_AOUT_INTERP(interpreter_type))
sys_close(elf_exec_fileno);
set_binfmt(&elf_format);
@@ -1061,14 +1079,14 @@
compute_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
retval = create_elf_tables(bprm, &loc->elf_ex,
- (interpreter_type == INTERPRETER_AOUT),
+ IS_AOUT_INTERP(interpreter_type),
load_addr, interp_load_addr);
if (retval < 0) {
send_sig(SIGKILL, current, 0);
goto out;
}
/* N.B. passed_fileno might not be initialized? */
- if (interpreter_type == INTERPRETER_AOUT)
+ if (IS_AOUT_INTERP(interpreter_type))
current->mm->arg_start += strlen(passed_fileno) + 1;
current->mm->end_code = end_code;
current->mm->start_code = start_code;
diff --git a/fs/exec.c b/fs/exec.c
index 927a7c5..9f9c272 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1166,7 +1166,7 @@
{
int try,retval;
struct linux_binfmt *fmt;
-#ifdef __alpha__
+#if defined(__alpha__) && defined(CONFIG_ARCH_SUPPORTS_AOUT)
/* handle /sbin/loader.. */
{
struct exec * eh = (struct exec *) bprm->buf;
