sky2: use duplex result bits
The result of duplex negotiation is avaliable in the phy status
register, so use that to simplify code and avoid rereading the PHY.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 88b12e8..6a594b0 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1714,26 +1714,7 @@
}
sky2->speed = sky2_phy_speed(hw, aux);
- if (sky2->speed == SPEED_1000) {
- u16 ctl2 = gm_phy_read(hw, port, PHY_MARV_1000T_CTRL);
- u16 lpa2 = gm_phy_read(hw, port, PHY_MARV_1000T_STAT);
- if (lpa2 & PHY_B_1000S_MSF) {
- printk(KERN_ERR PFX "%s: master/slave fault",
- sky2->netdev->name);
- return -1;
- }
-
- if ((ctl2 & PHY_M_1000C_AFD) && (lpa2 & PHY_B_1000S_LP_FD))
- sky2->duplex = DUPLEX_FULL;
- else
- sky2->duplex = DUPLEX_HALF;
- } else {
- u16 adv = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
- if ((aux & adv) & PHY_AN_FULL)
- sky2->duplex = DUPLEX_FULL;
- else
- sky2->duplex = DUPLEX_HALF;
- }
+ sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
/* Pause bits are offset (9..8) */
if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)
