commit 6bb9f0d93399cbde14fc6a1532341a14a85d2df4
author Patrice Chotard <patrice.chotard@st.com> Wed Aug 10 09:39:14 2016 +0200
committer Lee Jones <lee.jones@linaro.org> Wed Aug 10 09:25:18 2016 +0100
tree dfc09db23a1cd43685e919d8f07a021919c47e75
parent bd495916f2f0a05193c45b26e21b60c9ffaa8aae

mfd: Add STMPE1600 support

STMPE1600 is a 16-bit port expander.
Datasheet is available here :
http://www2.st.com/content/st_com/en/products/interfaces-and-transceivers/
i-o-expanders-and-level-translators/i-o-expanders/stmpe1600.html

Signed-off-by: Amelie DELAUNAY <amelie.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/stmpe.c

diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 1877d1e..cfdae8a 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -553,6 +553,59 @@
 };
 
 /*
+ * STMPE1600
+ * Compared to all others STMPE variant, LSB and MSB regs are located in this
+ * order :	LSB   addr
+ *		MSB   addr + 1
+ * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers
+ */
+
+static const u8 stmpe1600_regs[] = {
+	[STMPE_IDX_CHIP_ID]	= STMPE1600_REG_CHIP_ID,
+	[STMPE_IDX_SYS_CTRL]	= STMPE1600_REG_SYS_CTRL,
+	[STMPE_IDX_ICR_LSB]	= STMPE1600_REG_SYS_CTRL,
+	[STMPE_IDX_GPMR_LSB]	= STMPE1600_REG_GPMR_LSB,
+	[STMPE_IDX_GPMR_CSB]	= STMPE1600_REG_GPMR_MSB,
+	[STMPE_IDX_GPSR_LSB]	= STMPE1600_REG_GPSR_LSB,
+	[STMPE_IDX_GPSR_CSB]	= STMPE1600_REG_GPSR_MSB,
+	[STMPE_IDX_GPDR_LSB]	= STMPE1600_REG_GPDR_LSB,
+	[STMPE_IDX_GPDR_CSB]	= STMPE1600_REG_GPDR_MSB,
+	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1600_REG_IEGPIOR_LSB,
+	[STMPE_IDX_IEGPIOR_CSB]	= STMPE1600_REG_IEGPIOR_MSB,
+	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1600_REG_ISGPIOR_LSB,
+};
+
+static struct stmpe_variant_block stmpe1600_blocks[] = {
+	{
+		.cell	= &stmpe_gpio_cell,
+		.irq	= 0,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+};
+
+static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks,
+			   bool enable)
+{
+	if (blocks & STMPE_BLOCK_GPIO)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static struct stmpe_variant_info stmpe1600 = {
+	.name		= "stmpe1600",
+	.id_val		= STMPE1600_ID,
+	.id_mask	= 0xffff,
+	.num_gpios	= 16,
+	.af_bits	= 0,
+	.regs		= stmpe1600_regs,
+	.blocks		= stmpe1600_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe1600_blocks),
+	.num_irqs	= STMPE1600_NR_INTERNAL_IRQS,
+	.enable		= stmpe1600_enable,
+};
+
+/*
  * STMPE1601
  */
 
@@ -949,6 +1002,7 @@
 	[STMPE610]	= &stmpe610,
 	[STMPE801]	= &stmpe801,
 	[STMPE811]	= &stmpe811,
+	[STMPE1600]	= &stmpe1600,
 	[STMPE1601]	= &stmpe1601,
 	[STMPE1801]	= &stmpe1801,
 	[STMPE2401]	= &stmpe2401,
@@ -975,7 +1029,8 @@
 	int ret;
 	int i;
 
-	if (variant->id_val == STMPE801_ID) {
+	if (variant->id_val == STMPE801_ID ||
+	    variant->id_val == STMPE1600_ID) {
 		int base = irq_create_mapping(stmpe->domain, 0);
 
 		handle_nested_irq(base);
@@ -1149,13 +1204,13 @@
 		return ret;
 
 	if (stmpe->irq >= 0) {
-		if (id == STMPE801_ID)
+		if (id == STMPE801_ID || id == STMPE1600_ID)
 			icr = STMPE_SYS_CTRL_INT_EN;
 		else
 			icr = STMPE_ICR_LSB_GIM;
 
-		/* STMPE801 doesn't support Edge interrupts */
-		if (id != STMPE801_ID) {
+		/* STMPE801 and STMPE1600 don't support Edge interrupts */
+		if (id != STMPE801_ID && id != STMPE1600_ID) {
 			if (irq_trigger == IRQF_TRIGGER_FALLING ||
 					irq_trigger == IRQF_TRIGGER_RISING)
 				icr |= STMPE_ICR_LSB_EDGE;
@@ -1163,7 +1218,7 @@
 
 		if (irq_trigger == IRQF_TRIGGER_RISING ||
 				irq_trigger == IRQF_TRIGGER_HIGH) {
-			if (id == STMPE801_ID)
+			if (id == STMPE801_ID || id == STMPE1600_ID)
 				icr |= STMPE_SYS_CTRL_INT_HI;
 			else
 				icr |= STMPE_ICR_LSB_HIGH;