Merge branches 'tracing/function-graph-tracer' and 'linus' into tracing/core
diff --git a/MAINTAINERS b/MAINTAINERS
index 4c2e406..0ad4614 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -692,6 +692,13 @@
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/NUVOTON W90X900 ARM ARCHITECTURE
+P: Wan ZongShun
+M: mcuos.com@gmail.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.mcuos.com
+S: Maintained
+
ARPD SUPPORT
P: Jonathan Layes
L: netdev@vger.kernel.org
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index e0ee706..98e2f3d 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -608,7 +608,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
#
# USB-based Watchdog Cards
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 01d1ef9..1494561 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -700,7 +700,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
#
# USB-based Watchdog Cards
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 036a126..21599f3 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -710,7 +710,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
#
# USB-based Watchdog Cards
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 237a2a6..e2df81a 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -606,7 +606,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91SAM9_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
#
# Sonics Silicon Backplane
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index cd1d717..9b32d0e 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -727,7 +727,7 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91SAM9_WATCHDOG is not set
+# CONFIG_AT91SAM9X_WATCHDOG is not set
#
# USB-based Watchdog Cards
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index 8484909..d4a0da1 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -74,9 +74,9 @@
*/
int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
{
- if (executable_stack != EXSTACK_ENABLE_X)
+ if (executable_stack != EXSTACK_DISABLE_X)
return 1;
- if (cpu_architecture() <= CPU_ARCH_ARMv6)
+ if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
return 0;
}
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 9eca220..412aa49 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -697,7 +697,7 @@
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91cap9_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index fdde1ea..d74c9ac 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -643,7 +643,7 @@
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9260_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 1728975..59fc483 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -621,7 +621,7 @@
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9261_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b753cb8..134af97 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -854,7 +854,7 @@
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9263_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 145324f..7281865 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -609,7 +609,7 @@
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9rl_wdt_device = {
.name = "at91_wdt",
.id = -1,
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 9b0447c..2f7d497 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -490,7 +490,8 @@
/*--------------------------------------------------------------------------*/
-/* This lock class tells lockdep that GPIO irqs are in a different
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
* category than their parents, so it won't report false recursion.
*/
static struct lock_class_key gpio_lock_class;
@@ -509,9 +510,6 @@
unsigned id = this->id;
unsigned i;
- /* enable PIO controller's clock */
- clk_enable(this->clock);
-
__raw_writel(~0, this->regbase + PIO_IDR);
for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
@@ -556,7 +554,14 @@
data->chipbase = PIN_BASE + i * 32;
data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS;
- /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
+ /* enable PIO controller's clock */
+ clk_enable(data->clock);
+
+ /*
+ * Some processors share peripheral ID between multiple GPIO banks.
+ * SAM9263 (PIOC, PIOD, PIOE)
+ * CAP9 (PIOA, PIOB, PIOC, PIOD)
+ */
if (last && last->id == data->id)
last->next = data;
}
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index fb51f0e..0b3ae21 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -93,6 +93,7 @@
u8 enable_pin; /* chip enable */
u8 det_pin; /* card detect */
u8 rdy_pin; /* ready/busy */
+ u8 rdy_pin_active_low; /* rdy_pin value is inverted */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
diff --git a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
deleted file mode 100644
index 21fe2b9..0000000
--- a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/gesbc9312.h
- */
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 529807d..2866297 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -10,7 +10,6 @@
#include "platform.h"
-#include "gesbc9312.h"
#include "ts72xx.h"
#endif
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index efb86b7..06083b2 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -42,7 +42,7 @@
writel(0, GPIO_EDGE_CAUSE(32));
for (i = IRQ_KIRKWOOD_GPIO_START; i < NR_IRQS; i++) {
- set_irq_chip(i, &orion_gpio_irq_level_chip);
+ set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index e273418..30b7e4b 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -40,7 +40,7 @@
writel(0, GPIO_EDGE_CAUSE(0));
for (i = IRQ_MV78XX0_GPIO_START; i < NR_IRQS; i++) {
- set_irq_chip(i, &orion_gpio_irq_level_chip);
+ set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index ad721e0..ce4d46a 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -565,7 +565,7 @@
*
* Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
* find the corresponding register field value. The return register value is
- * the value before left-shifting. Returns 0xffffffff on error
+ * the value before left-shifting. Returns ~0 on error
*/
u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
{
@@ -577,7 +577,7 @@
clks = omap2_get_clksel_by_parent(clk, clk->parent);
if (clks == NULL)
- return 0;
+ return ~0;
for (clkr = clks->rates; clkr->div; clkr++) {
if ((clkr->flags & cpu_mask) && (clkr->div == div))
@@ -588,7 +588,7 @@
printk(KERN_ERR "clock: Could not find divisor %d for "
"clock %s parent %s\n", div, clk->name,
clk->parent->name);
- return 0;
+ return ~0;
}
return clkr->val;
@@ -708,7 +708,7 @@
return 0;
for (clkr = clks->rates; clkr->div; clkr++) {
- if (clkr->flags & (cpu_mask | DEFAULT_RATE))
+ if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
break; /* Found the default rate for this platform */
}
@@ -746,7 +746,7 @@
return -EINVAL;
if (clk->usecount > 0)
- _omap2_clk_disable(clk);
+ omap2_clk_disable(clk);
/* Set new source value (previous dividers if any in effect) */
reg_val = __raw_readl(src_addr) & ~field_mask;
@@ -759,11 +759,11 @@
wmb();
}
- if (clk->usecount > 0)
- _omap2_clk_enable(clk);
-
clk->parent = new_parent;
+ if (clk->usecount > 0)
+ omap2_clk_enable(clk);
+
/* CLKSEL clocks follow their parents' rates, divided by a divisor */
clk->rate = new_parent->rate;
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 0caae43..e03f7b4 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -44,7 +44,7 @@
* User can use set_type() if he wants to use edge types handlers.
*/
for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) {
- set_irq_chip(i, &orion_gpio_irq_level_chip);
+ set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 9b36c5c..d4d082c 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -693,7 +693,8 @@
* Check whether this memory bank would entirely overlap
* the vmalloc area.
*/
- if (__va(bank->start) >= VMALLOC_MIN) {
+ if (__va(bank->start) >= VMALLOC_MIN ||
+ __va(bank->start) < PAGE_OFFSET) {
printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
"(vmalloc region overlap).\n",
bank->start, bank->start + bank->size - 1);
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 9671864..0d12c21 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -265,51 +265,36 @@
* polarity LEVEL mask
*
****************************************************************************/
-static void gpio_irq_edge_ack(u32 irq)
-{
- int pin = irq_to_gpio(irq);
- writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
+static void gpio_irq_ack(u32 irq)
+{
+ int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+ int pin = irq_to_gpio(irq);
+ writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
+ }
}
-static void gpio_irq_edge_mask(u32 irq)
+static void gpio_irq_mask(u32 irq)
{
int pin = irq_to_gpio(irq);
- u32 u;
-
- u = readl(GPIO_EDGE_MASK(pin));
+ int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+ u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
+ GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
+ u32 u = readl(reg);
u &= ~(1 << (pin & 31));
- writel(u, GPIO_EDGE_MASK(pin));
+ writel(u, reg);
}
-static void gpio_irq_edge_unmask(u32 irq)
+static void gpio_irq_unmask(u32 irq)
{
int pin = irq_to_gpio(irq);
- u32 u;
-
- u = readl(GPIO_EDGE_MASK(pin));
+ int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
+ u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
+ GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
+ u32 u = readl(reg);
u |= 1 << (pin & 31);
- writel(u, GPIO_EDGE_MASK(pin));
-}
-
-static void gpio_irq_level_mask(u32 irq)
-{
- int pin = irq_to_gpio(irq);
- u32 u;
-
- u = readl(GPIO_LEVEL_MASK(pin));
- u &= ~(1 << (pin & 31));
- writel(u, GPIO_LEVEL_MASK(pin));
-}
-
-static void gpio_irq_level_unmask(u32 irq)
-{
- int pin = irq_to_gpio(irq);
- u32 u;
-
- u = readl(GPIO_LEVEL_MASK(pin));
- u |= 1 << (pin & 31);
- writel(u, GPIO_LEVEL_MASK(pin));
+ writel(u, reg);
}
static int gpio_irq_set_type(u32 irq, u32 type)
@@ -331,9 +316,9 @@
* Set edge/level type.
*/
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
- desc->chip = &orion_gpio_irq_edge_chip;
+ desc->handle_irq = handle_edge_irq;
} else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
- desc->chip = &orion_gpio_irq_level_chip;
+ desc->handle_irq = handle_level_irq;
} else {
printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
return -EINVAL;
@@ -371,19 +356,11 @@
return 0;
}
-struct irq_chip orion_gpio_irq_edge_chip = {
- .name = "orion_gpio_irq_edge",
- .ack = gpio_irq_edge_ack,
- .mask = gpio_irq_edge_mask,
- .unmask = gpio_irq_edge_unmask,
- .set_type = gpio_irq_set_type,
-};
-
-struct irq_chip orion_gpio_irq_level_chip = {
- .name = "orion_gpio_irq_level",
- .mask = gpio_irq_level_mask,
- .mask_ack = gpio_irq_level_mask,
- .unmask = gpio_irq_level_unmask,
+struct irq_chip orion_gpio_irq_chip = {
+ .name = "orion_gpio",
+ .ack = gpio_irq_ack,
+ .mask = gpio_irq_mask,
+ .unmask = gpio_irq_unmask,
.set_type = gpio_irq_set_type,
};
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 54deaf2..ec743e8 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -31,8 +31,7 @@
/*
* GPIO interrupt handling.
*/
-extern struct irq_chip orion_gpio_irq_edge_chip;
-extern struct irq_chip orion_gpio_irq_level_chip;
+extern struct irq_chip orion_gpio_irq_chip;
void orion_gpio_irq_handler(int irqoff);
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index aafaf7a..cff8e84f 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -116,6 +116,7 @@
int enable_pin; /* chip enable */
int det_pin; /* card detect */
int rdy_pin; /* ready/busy */
+ u8 rdy_pin_active_low; /* rdy_pin value is inverted */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 5217264..95b0f7d 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -145,7 +145,7 @@
value->tv_usec = rp.subreg.even / 4096;
value->tv_sec = rp.subreg.odd;
#else
- value->tv_usec = cputime % 4096000000ULL;
+ value->tv_usec = (cputime % 4096000000ULL) / 4096;
value->tv_sec = cputime / 4096000000ULL;
#endif
}
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 2bd9fae..e8bd6ac 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -43,6 +43,8 @@
extern struct mem_chunk memory_chunk[];
extern unsigned long real_memory_size;
+extern int memory_end_set;
+extern unsigned long memory_end;
void detect_memory_layout(struct mem_chunk chunk[]);
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index d825f49..c5cfb61 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -82,7 +82,9 @@
struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
-static unsigned long __initdata memory_end;
+
+int __initdata memory_end_set;
+unsigned long __initdata memory_end;
/*
* This is set up by the setup-routine at boot-time
@@ -281,6 +283,7 @@
static int __init early_parse_mem(char *p)
{
memory_end = memparse(p, &p);
+ memory_end_set = 1;
return 0;
}
early_param("mem", early_parse_mem);
@@ -508,8 +511,10 @@
int i;
#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
- if (ipl_info.type == IPL_TYPE_FCP_DUMP)
+ if (ipl_info.type == IPL_TYPE_FCP_DUMP) {
memory_end = ZFCPDUMP_HSA_SIZE;
+ memory_end_set = 1;
+ }
#endif
memory_size = 0;
memory_end &= PAGE_MASK;
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 115449f..570f36e 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -862,7 +862,7 @@
}
/* lets not touch this if we didn't frob it */
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5) {
v = apic_read(APIC_LVTTHMR);
apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 1c83803..25cf624 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -295,11 +295,11 @@
* If we know that the error was in user space, send a
* SIGBUS. Otherwise, panic if tolerance is low.
*
- * do_exit() takes an awful lot of locks and has a slight
+ * force_sig() takes an awful lot of locks and has a slight
* risk of deadlocking.
*/
if (user_space) {
- do_exit(SIGBUS);
+ force_sig(SIGBUS, current);
} else if (panic_on_oops || tolerant < 2) {
mce_panic("Uncorrected machine check",
&panicm, mcestart);
@@ -734,6 +734,7 @@
static int mce_resume(struct sys_device *dev)
{
mce_init(NULL);
+ mce_cpu_features(¤t_cpu_data);
return 0;
}
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index a546f55..bd4da2a 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -104,9 +104,6 @@
check_pgt_cache();
rmb();
- if (rcu_pending(cpu))
- rcu_check_callbacks(cpu, 0);
-
if (cpu_is_offline(cpu))
play_dead();
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index c98c1570..47a33ce 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -139,7 +139,8 @@
struct nand_chip *nand_chip = mtd->priv;
struct atmel_nand_host *host = nand_chip->priv;
- return gpio_get_value(host->board->rdy_pin);
+ return gpio_get_value(host->board->rdy_pin) ^
+ !!host->board->rdy_pin_active_low;
}
/*
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 1fd8f21..4377e93 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -280,8 +280,11 @@
rc = 0;
for (offset = sizeof(struct sccb_header); offset < sccb->length;
offset += evbuf->length) {
- /* Search for event handler */
evbuf = (struct evbuf_header *) ((addr_t) sccb + offset);
+ /* Check for malformed hardware response */
+ if (evbuf->length == 0)
+ break;
+ /* Search for event handler */
reg = NULL;
list_for_each(l, &sclp_reg_list) {
reg = list_entry(l, struct sclp_register, list);
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 5063904..77ab6e3 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -19,6 +19,7 @@
#include <linux/memory.h>
#include <asm/chpid.h>
#include <asm/sclp.h>
+#include <asm/setup.h>
#include "sclp.h"
@@ -474,6 +475,10 @@
goto skip_add;
if (start + size > VMEM_MAX_PHYS)
size = VMEM_MAX_PHYS - start;
+ if (memory_end_set && (start >= memory_end))
+ goto skip_add;
+ if (memory_end_set && (start + size > memory_end))
+ size = memory_end - start;
add_memory(0, start, size);
skip_add:
first_rn = rn;
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 9b36205..0ce4e28 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -904,8 +904,8 @@
/* most IN status is the same, but ISO can't stall */
*ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
- | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
- ? 0 : UDCCS_BI_SST;
+ | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+ ? 0 : UDCCS_BI_SST);
}
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 5531691..e35d545 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -107,10 +107,10 @@
static int at91_wdt_settimeout(int new_time)
{
/*
- * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+ * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
*
* Since WDV is a 16-bit counter, the maximum period is
- * 65536 / 0.256 = 256 seconds.
+ * 65536 / 256 = 256 seconds.
*/
if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
return -EINVAL;
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index b1da287..a56ac84 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -18,6 +18,7 @@
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
diff --git a/sound/core/jack.c b/sound/core/jack.c
index dd4a12d..077a852 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -47,7 +47,7 @@
int err;
snprintf(jack->name, sizeof(jack->name), "%s %s",
- card->longname, jack->id);
+ card->shortname, jack->id);
jack->input_dev->name = jack->name;
/* Default to the sound card device. */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 11e791b..c8d9178 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1947,16 +1947,13 @@
return 0;
}
-static int azx_resume_early(struct pci_dev *pci)
-{
- return pci_restore_state(pci);
-}
-
static int azx_resume(struct pci_dev *pci)
{
struct snd_card *card = pci_get_drvdata(pci);
struct azx *chip = card->private_data;
+ pci_set_power_state(pci, PCI_D0);
+ pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
printk(KERN_ERR "hda-intel: pci_enable_device failed, "
"disabling device\n");
@@ -2468,7 +2465,6 @@
.remove = __devexit_p(azx_remove),
#ifdef CONFIG_PM
.suspend = azx_suspend,
- .resume_early = azx_resume_early,
.resume = azx_resume,
#endif
};
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 18c7c91..6c870c1 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -26,7 +26,7 @@
* SPI 0 -> 1st PCM1796 (front)
* SPI 1 -> 2nd PCM1796 (surround)
* SPI 2 -> 3rd PCM1796 (center/LFE)
- * SPI 4 -> 4th PCM1796 (back) and EEPROM self-destruct (do not use!)
+ * SPI 4 -> 4th PCM1796 (back)
*
* GPIO 2 -> M0 of CS5381
* GPIO 3 -> M1 of CS5381
@@ -207,12 +207,6 @@
static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
u8 reg, u8 value)
{
- /*
- * We don't want to do writes on SPI 4 because the EEPROM, which shares
- * the same pin, might get confused and broken. We'd better take care
- * that the driver works with the default register values ...
- */
-#if 0
/* maps ALSA channel pair number to SPI output */
static const u8 codec_map[4] = {
0, 1, 2, 4
@@ -223,7 +217,6 @@
(codec_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
(reg << 8) | value);
-#endif
}
static inline void pcm1796_write_i2c(struct oxygen *chip, unsigned int codec,
@@ -757,9 +750,6 @@
static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
{
- if (!strncmp(template->name, "Master Playback ", 16))
- /* disable volume/mute because they would require SPI writes */
- return 1;
if (!strncmp(template->name, "CD Capture ", 11))
/* CD in is actually connected to the video in pin */
template->private_value ^= AC97_CD ^ AC97_VIDEO;
@@ -850,8 +840,9 @@
.dac_volume_min = 0x0f,
.dac_volume_max = 0xff,
.misc_flags = OXYGEN_MISC_MIDI,
- .function_flags = OXYGEN_FUNCTION_SPI,
- .dac_i2s_format = OXYGEN_I2S_FORMAT_I2S,
+ .function_flags = OXYGEN_FUNCTION_SPI |
+ OXYGEN_FUNCTION_ENABLE_SPI_4_5,
+ .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
};
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 2ab8312..19e3745 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -2524,7 +2524,6 @@
* build the rate table and bitmap flags
*/
int r, idx;
- unsigned int nonzero_rates = 0;
fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
if (fp->rate_table == NULL) {
@@ -2532,24 +2531,27 @@
return -1;
}
- fp->nr_rates = nr_rates;
- fp->rate_min = fp->rate_max = combine_triple(&fmt[8]);
+ fp->nr_rates = 0;
+ fp->rate_min = fp->rate_max = 0;
for (r = 0, idx = offset + 1; r < nr_rates; r++, idx += 3) {
unsigned int rate = combine_triple(&fmt[idx]);
+ if (!rate)
+ continue;
/* C-Media CM6501 mislabels its 96 kHz altsetting */
if (rate == 48000 && nr_rates == 1 &&
- chip->usb_id == USB_ID(0x0d8c, 0x0201) &&
+ (chip->usb_id == USB_ID(0x0d8c, 0x0201) ||
+ chip->usb_id == USB_ID(0x0d8c, 0x0102)) &&
fp->altsetting == 5 && fp->maxpacksize == 392)
rate = 96000;
- fp->rate_table[r] = rate;
- nonzero_rates |= rate;
- if (rate < fp->rate_min)
+ fp->rate_table[fp->nr_rates] = rate;
+ if (!fp->rate_min || rate < fp->rate_min)
fp->rate_min = rate;
- else if (rate > fp->rate_max)
+ if (!fp->rate_max || rate > fp->rate_max)
fp->rate_max = rate;
fp->rates |= snd_pcm_rate_to_rate_bit(rate);
+ fp->nr_rates++;
}
- if (!nonzero_rates) {
+ if (!fp->nr_rates) {
hwc_debug("All rates were zero. Skipping format!\n");
return -1;
}
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 320641a..26bad37 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -1625,6 +1625,7 @@
}
ep_info.out_ep = get_endpoint(hostif, 2)->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+ ep_info.out_interval = 0;
ep_info.out_cables = endpoint->out_cables & 0x5555;
err = snd_usbmidi_out_endpoint_create(umidi, &ep_info, &umidi->endpoints[0]);
if (err < 0)
