clk: tegra: Model oscillator as clock
Currently the Tegra clock driver simplifies the clock tree somewhat by
taking advantage of the fact that clk_m runs at the same frequency as
the oscillator. While that's true on all currently supported SoCs, it
does not apply to Tegra210 anymore. On Tegra210 clk_m is typically
divided down from the oscillator frequency. To support that setup, add
a separate clock for the oscillator that both clk_m and pll_ref derive
from.
Modify the tegra_osc_clk_init() function to take an additional divider
parameter for clk_m. Existing SoCs always pass in 1, whereas Tegra210
will read the divider from a register in the clock & reset controller.
Signed-off-by: Thierry Reding <treding@nvidia.com>
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index 29b39c8c..f1fa29e 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -1480,7 +1480,8 @@
return;
if (tegra_osc_clk_init(clk_base, tegra124_clks, tegra124_input_freq,
- ARRAY_SIZE(tegra124_input_freq), &osc_freq, &pll_ref_freq) < 0)
+ ARRAY_SIZE(tegra124_input_freq), 1, &osc_freq,
+ &pll_ref_freq) < 0)
return;
tegra_fixed_clk_init(tegra124_clks);
