[PATCH] dvb: usb/pci: correct syntax of driver name fields
Change the name-field of the pci_driver and usb_driver structs to the name of
the module after compilation. It seems that this field is used in some places
where special characters are not allowed. Thanks to Alan Halverson for
finding this problem.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c
index 672037c..f2fcc2f 100644
--- a/drivers/media/dvb/dvb-usb/a800.c
+++ b/drivers/media/dvb/dvb-usb/a800.c
@@ -149,7 +149,7 @@
static struct usb_driver a800_driver = {
.owner = THIS_MODULE,
- .name = "AVerMedia AverTV DVB-T USB 2.0 (A800)",
+ .name = "dvb_usb_a800",
.probe = a800_probe,
.disconnect = dvb_usb_device_exit,
.id_table = a800_table,
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index b4bb206..c3e1b66 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -262,7 +262,7 @@
static struct usb_driver cxusb_driver = {
.owner = THIS_MODULE,
- .name = "cxusb",
+ .name = "dvb_usb_cxusb",
.probe = cxusb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = cxusb_table,
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c
index cda2179..828b518 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c
@@ -317,7 +317,7 @@
static struct usb_driver dibusb_driver = {
.owner = THIS_MODULE,
- .name = "DiBcom based USB DVB-T devices (DiB3000M-B based)",
+ .name = "dvb_usb_dibusb_mb",
.probe = dibusb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = dibusb_dib3000mb_table,
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c
index aad8ed3..e9dac43 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mc.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c
@@ -83,7 +83,7 @@
static struct usb_driver dibusb_mc_driver = {
.owner = THIS_MODULE,
- .name = "DiBcom based USB2.0 DVB-T (DiB3000M-C/P based) devices",
+ .name = "dvb_usb_dibusb_mc",
.probe = dibusb_mc_probe,
.disconnect = dvb_usb_device_exit,
.id_table = dibusb_dib3000mc_table,
diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
index 8155a26..9a676afc 100644
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ b/drivers/media/dvb/dvb-usb/digitv.c
@@ -228,7 +228,7 @@
static struct usb_driver digitv_driver = {
.owner = THIS_MODULE,
- .name = "Nebula Electronics uDigiTV DVB-T USB2.0 device",
+ .name = "dvb_usb_digitv",
.probe = digitv_probe,
.disconnect = dvb_usb_device_exit,
.id_table = digitv_table,
diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
index 9d83781..258a92b 100644
--- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
@@ -203,7 +203,7 @@
static struct usb_driver nova_t_driver = {
.owner = THIS_MODULE,
- .name = "Hauppauge WinTV-NOVA-T usb2",
+ .name = "dvb_usb_nova_t_usb2",
.probe = nova_t_probe,
.disconnect = dvb_usb_device_exit,
.id_table = nova_t_table,
diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c
index aa56042..2112ac3 100644
--- a/drivers/media/dvb/dvb-usb/umt-010.c
+++ b/drivers/media/dvb/dvb-usb/umt-010.c
@@ -129,7 +129,7 @@
static struct usb_driver umt_driver = {
.owner = THIS_MODULE,
- .name = "HanfTek UMT-010 USB2.0 DVB-T devices",
+ .name = "dvb_usb_umt_010",
.probe = umt_probe,
.disconnect = dvb_usb_device_exit,
.id_table = umt_table,
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index 72d5d3f..5adc5d6 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -44,7 +44,7 @@
if (usb_control_msg(d->udev,
usb_sndctrlpipe(d->udev,0),
TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0,
- outbuf, 20, 2*HZ) != 20) {
+ outbuf, 20, 2000) != 20) {
err("USB control message 'out' went wrong.");
ret = -EIO;
goto unlock;
@@ -55,7 +55,7 @@
if (usb_control_msg(d->udev,
usb_rcvctrlpipe(d->udev,0),
TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
- inbuf, 12, 2*HZ) != 12) {
+ inbuf, 12, 2000) != 12) {
err("USB control message 'in' went wrong.");
ret = -EIO;
goto unlock;
@@ -255,7 +255,7 @@
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver vp7045_usb_driver = {
.owner = THIS_MODULE,
- .name = "dvb-usb-vp7045",
+ .name = "dvb_usb_vp7045",
.probe = vp7045_usb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = vp7045_usb_table,
