diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c04ad68..04c208e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5234,112 +5234,116 @@
 }
 
 #ifdef CONFIG_PM
-static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
+static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 			       unsigned int action, unsigned int ehi_flags,
 			       int wait)
 {
+	struct ata_link *link;
 	unsigned long flags;
-	int i, rc;
+	int rc;
 
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-		struct ata_link *link;
-
-		/* Previous resume operation might still be in
-		 * progress.  Wait for PM_PENDING to clear.
-		 */
-		if (ap->pflags & ATA_PFLAG_PM_PENDING) {
-			ata_port_wait_eh(ap);
-			WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
-		}
-
-		/* request PM ops to EH */
-		spin_lock_irqsave(ap->lock, flags);
-
-		ap->pm_mesg = mesg;
-		if (wait) {
-			rc = 0;
-			ap->pm_result = &rc;
-		}
-
-		ap->pflags |= ATA_PFLAG_PM_PENDING;
-		ata_for_each_link(link, ap, HOST_FIRST) {
-			link->eh_info.action |= action;
-			link->eh_info.flags |= ehi_flags;
-		}
-
-		ata_port_schedule_eh(ap);
-
-		spin_unlock_irqrestore(ap->lock, flags);
-
-		/* wait and check result */
-		if (wait) {
-			ata_port_wait_eh(ap);
-			WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
-			if (rc)
-				return rc;
-		}
+	/* Previous resume operation might still be in
+	 * progress.  Wait for PM_PENDING to clear.
+	 */
+	if (ap->pflags & ATA_PFLAG_PM_PENDING) {
+		ata_port_wait_eh(ap);
+		WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
 	}
 
-	return 0;
+	/* request PM ops to EH */
+	spin_lock_irqsave(ap->lock, flags);
+
+	ap->pm_mesg = mesg;
+	if (wait) {
+		rc = 0;
+		ap->pm_result = &rc;
+	}
+
+	ap->pflags |= ATA_PFLAG_PM_PENDING;
+	ata_for_each_link(link, ap, HOST_FIRST) {
+		link->eh_info.action |= action;
+		link->eh_info.flags |= ehi_flags;
+	}
+
+	ata_port_schedule_eh(ap);
+
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	/* wait and check result */
+	if (wait) {
+		ata_port_wait_eh(ap);
+		WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
+	}
+
+	return rc;
 }
 
+#define to_ata_port(d) container_of(d, struct ata_port, tdev)
+
+static int ata_port_suspend_common(struct device *dev)
+{
+	struct ata_port *ap = to_ata_port(dev);
+	int rc;
+
+	rc = ata_port_request_pm(ap, PMSG_SUSPEND, 0, ATA_EHI_QUIET, 1);
+	return rc;
+}
+
+static int ata_port_suspend(struct device *dev)
+{
+	if (pm_runtime_suspended(dev))
+		return 0;
+
+	return ata_port_suspend_common(dev);
+}
+
+static int ata_port_resume(struct device *dev)
+{
+	struct ata_port *ap = to_ata_port(dev);
+	int rc;
+
+	rc = ata_port_request_pm(ap, PMSG_ON, ATA_EH_RESET,
+		ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 1);
+	return rc;
+}
+
+static const struct dev_pm_ops ata_port_pm_ops = {
+	.suspend = ata_port_suspend,
+	.resume = ata_port_resume,
+};
+
 /**
  *	ata_host_suspend - suspend host
  *	@host: host to suspend
  *	@mesg: PM message
  *
- *	Suspend @host.  Actual operation is performed by EH.  This
- *	function requests EH to perform PM operations and waits for EH
- *	to finish.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	0 on success, -errno on failure.
+ *	Suspend @host.  Actual operation is performed by port suspend.
  */
 int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
 {
-	unsigned int ehi_flags = ATA_EHI_QUIET;
-	int rc;
-
-	/*
-	 * On some hardware, device fails to respond after spun down
-	 * for suspend.  As the device won't be used before being
-	 * resumed, we don't need to touch the device.  Ask EH to skip
-	 * the usual stuff and proceed directly to suspend.
-	 *
-	 * http://thread.gmane.org/gmane.linux.ide/46764
-	 */
-	if (mesg.event == PM_EVENT_SUSPEND)
-		ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY;
-
-	rc = ata_host_request_pm(host, mesg, 0, ehi_flags, 1);
-	if (rc == 0)
-		host->dev->power.power_state = mesg;
-	return rc;
+	host->dev->power.power_state = mesg;
+	return 0;
 }
 
 /**
  *	ata_host_resume - resume host
  *	@host: host to resume
  *
- *	Resume @host.  Actual operation is performed by EH.  This
- *	function requests EH to perform PM operations and returns.
- *	Note that all resume operations are performed parallelly.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
+ *	Resume @host.  Actual operation is performed by port resume.
  */
 void ata_host_resume(struct ata_host *host)
 {
-	ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET,
-			    ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
 	host->dev->power.power_state = PMSG_ON;
 }
 #endif
 
+struct device_type ata_port_type = {
+	.name = "ata_port",
+#ifdef CONFIG_PM
+	.pm = &ata_port_pm_ops,
+#endif
+};
+
 /**
  *	ata_dev_init - Initialize an ata_device structure
  *	@dev: Device structure to initialize