rt2x00: Move beacon and atim queue defines into rt2x00
As Johannes Berg indicated the BEACON and AFTER_BEACON
queue indeces in mac80211 should be removed because they
are too hardware specific. This patch adds the queue index
defines into rt2x00queue.h and removes the dependency of
the defines inside mac80211.h.
Also move rt2x00pci_beacon_update() into rt2400pci and
rt2500pci individually since it is no longer a generic
function since rt61 and rt2800 no longer use that.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 61766ed..feb8c09 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1041,11 +1041,11 @@
* TX data initialization
*/
static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- unsigned int queue)
+ const unsigned int queue)
{
u32 reg;
- if (queue == IEEE80211_TX_QUEUE_BEACON) {
+ if (queue == RT2X00_BCN_QUEUE_BEACON) {
rt2x00pci_register_read(rt2x00dev, CSR14, ®);
if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
rt2x00_set_field32(®, CSR14_BEACON_GEN, 1);
@@ -1060,7 +1060,7 @@
rt2x00_set_field32(®, TXCSR0_KICK_TX,
(queue == IEEE80211_TX_QUEUE_DATA1));
rt2x00_set_field32(®, TXCSR0_KICK_ATIM,
- (queue == IEEE80211_TX_QUEUE_AFTER_BEACON));
+ (queue == RT2X00_BCN_QUEUE_ATIM));
rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
}
@@ -1165,7 +1165,7 @@
* 3 - Atim ring transmit done interrupt.
*/
if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
- rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
+ rt2400pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM);
/*
* 4 - Priority ring transmit done interrupt.
@@ -1510,6 +1510,49 @@
rt2x00pci_register_write(rt2x00dev, CSR17, 0);
}
+static int rt2400pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ieee80211_tx_control *control)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct rt2x00_intf *intf = vif_to_intf(control->vif);
+ struct queue_entry_priv_pci_tx *priv_tx;
+ struct skb_frame_desc *skbdesc;
+
+ if (unlikely(!intf->beacon))
+ return -ENOBUFS;
+
+ priv_tx = intf->beacon->priv_data;
+
+ /*
+ * Fill in skb descriptor
+ */
+ skbdesc = get_skb_frame_desc(skb);
+ memset(skbdesc, 0, sizeof(*skbdesc));
+ skbdesc->data = skb->data;
+ skbdesc->data_len = skb->len;
+ skbdesc->desc = priv_tx->desc;
+ skbdesc->desc_len = intf->beacon->queue->desc_size;
+ skbdesc->entry = intf->beacon;
+
+ /*
+ * mac80211 doesn't provide the control->queue variable
+ * for beacons. Set our own queue identification so
+ * it can be used during descriptor initialization.
+ */
+ control->queue = RT2X00_BCN_QUEUE_BEACON;
+ rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
+
+ /*
+ * Enable beacon generation.
+ * Write entire beacon with descriptor to register,
+ * and kick the beacon generator.
+ */
+ memcpy(priv_tx->data, skb->data, skb->len);
+ rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
+
+ return 0;
+}
+
static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
@@ -1535,7 +1578,7 @@
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2400pci_get_tsf,
.reset_tsf = rt2400pci_reset_tsf,
- .beacon_update = rt2x00pci_beacon_update,
+ .beacon_update = rt2400pci_beacon_update,
.tx_last_beacon = rt2400pci_tx_last_beacon,
};
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 6a558bf..36c64f7 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -252,7 +252,7 @@
const unsigned int flags)
{
struct data_queue *queue =
- rt2x00queue_get_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
+ rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON);
unsigned int bcn_preload;
u32 reg;
@@ -1195,11 +1195,11 @@
* TX data initialization
*/
static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- unsigned int queue)
+ const unsigned int queue)
{
u32 reg;
- if (queue == IEEE80211_TX_QUEUE_BEACON) {
+ if (queue == RT2X00_BCN_QUEUE_BEACON) {
rt2x00pci_register_read(rt2x00dev, CSR14, ®);
if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
rt2x00_set_field32(®, CSR14_BEACON_GEN, 1);
@@ -1214,7 +1214,7 @@
rt2x00_set_field32(®, TXCSR0_KICK_TX,
(queue == IEEE80211_TX_QUEUE_DATA1));
rt2x00_set_field32(®, TXCSR0_KICK_ATIM,
- (queue == IEEE80211_TX_QUEUE_AFTER_BEACON));
+ (queue == RT2X00_BCN_QUEUE_ATIM));
rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
}
@@ -1316,7 +1316,7 @@
* 3 - Atim ring transmit done interrupt.
*/
if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
- rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON);
+ rt2500pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM);
/*
* 4 - Priority ring transmit done interrupt.
@@ -1822,6 +1822,49 @@
rt2x00pci_register_write(rt2x00dev, CSR17, 0);
}
+static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ieee80211_tx_control *control)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct rt2x00_intf *intf = vif_to_intf(control->vif);
+ struct queue_entry_priv_pci_tx *priv_tx;
+ struct skb_frame_desc *skbdesc;
+
+ if (unlikely(!intf->beacon))
+ return -ENOBUFS;
+
+ priv_tx = intf->beacon->priv_data;
+
+ /*
+ * Fill in skb descriptor
+ */
+ skbdesc = get_skb_frame_desc(skb);
+ memset(skbdesc, 0, sizeof(*skbdesc));
+ skbdesc->data = skb->data;
+ skbdesc->data_len = skb->len;
+ skbdesc->desc = priv_tx->desc;
+ skbdesc->desc_len = intf->beacon->queue->desc_size;
+ skbdesc->entry = intf->beacon;
+
+ /*
+ * mac80211 doesn't provide the control->queue variable
+ * for beacons. Set our own queue identification so
+ * it can be used during descriptor initialization.
+ */
+ control->queue = RT2X00_BCN_QUEUE_BEACON;
+ rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
+
+ /*
+ * Enable beacon generation.
+ * Write entire beacon with descriptor to register,
+ * and kick the beacon generator.
+ */
+ memcpy(priv_tx->data, skb->data, skb->len);
+ rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
+
+ return 0;
+}
+
static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
@@ -1847,7 +1890,7 @@
.get_tx_stats = rt2x00mac_get_tx_stats,
.get_tsf = rt2500pci_get_tsf,
.reset_tsf = rt2500pci_reset_tsf,
- .beacon_update = rt2x00pci_beacon_update,
+ .beacon_update = rt2500pci_beacon_update,
.tx_last_beacon = rt2500pci_tx_last_beacon,
};
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 31258ee..38c968e 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1100,11 +1100,11 @@
* TX data initialization
*/
static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- unsigned int queue)
+ const unsigned int queue)
{
u16 reg;
- if (queue != IEEE80211_TX_QUEUE_BEACON)
+ if (queue != RT2X00_BCN_QUEUE_BEACON)
return;
rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®);
@@ -1758,11 +1758,11 @@
skbdesc->entry = intf->beacon;
/*
- * Just in case mac80211 doesn't set this correctly,
- * but we need this queue set for the descriptor
- * initialization.
+ * mac80211 doesn't provide the control->queue variable
+ * for beacons. Set our own queue identification so
+ * it can be used during descriptor initialization.
*/
- control->queue = IEEE80211_TX_QUEUE_BEACON;
+ control->queue = RT2X00_BCN_QUEUE_BEACON;
rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 2363ca4..b0e4ea7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -526,7 +526,7 @@
int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb);
void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev,
- unsigned int queue);
+ const unsigned int queue);
/*
* RX control handlers
@@ -906,10 +906,11 @@
/**
* rt2x00queue_get_queue - Convert mac80211 queue index to rt2x00 queue
* @rt2x00dev: Pointer to &struct rt2x00_dev.
- * @queue: mac80211 queue index (see &enum ieee80211_tx_queue).
+ * @queue: mac80211/rt2x00 queue index
+ * (see &enum ieee80211_tx_queue and &enum rt2x00_bcn_queue).
*/
struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
- const enum ieee80211_tx_queue queue);
+ const unsigned int queue);
/**
* rt2x00queue_get_entry - Get queue entry where the given index points to.
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 1bc8c14..0df8062 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -679,7 +679,7 @@
* Beacons and probe responses require the tsf timestamp
* to be inserted into the frame.
*/
- if (control->queue == IEEE80211_TX_QUEUE_BEACON ||
+ if (control->queue == RT2X00_BCN_QUEUE_BEACON ||
is_probe_resp(frame_control))
__set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc.flags);
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 65a2bcd..8c24d3b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -164,7 +164,7 @@
struct rt2x00_dev *rt2x00dev = hw->priv;
struct rt2x00_intf *intf = vif_to_intf(conf->vif);
struct data_queue *queue =
- rt2x00queue_get_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
+ rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON);
struct queue_entry *entry = NULL;
unsigned int i;
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 764147d..275c8a1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -32,53 +32,6 @@
#include "rt2x00pci.h"
/*
- * Beacon handlers.
- */
-int rt2x00pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ieee80211_tx_control *control)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
- struct rt2x00_intf *intf = vif_to_intf(control->vif);
- struct queue_entry_priv_pci_tx *priv_tx;
- struct skb_frame_desc *skbdesc;
-
- if (unlikely(!intf->beacon))
- return -ENOBUFS;
-
- priv_tx = intf->beacon->priv_data;
-
- /*
- * Fill in skb descriptor
- */
- skbdesc = get_skb_frame_desc(skb);
- memset(skbdesc, 0, sizeof(*skbdesc));
- skbdesc->data = skb->data;
- skbdesc->data_len = skb->len;
- skbdesc->desc = priv_tx->desc;
- skbdesc->desc_len = intf->beacon->queue->desc_size;
- skbdesc->entry = intf->beacon;
-
- /*
- * Just in case mac80211 doesn't set this correctly,
- * but we need this queue set for the descriptor
- * initialization.
- */
- control->queue = IEEE80211_TX_QUEUE_BEACON;
- rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
-
- /*
- * Enable beacon generation.
- * Write entire beacon with descriptor to register,
- * and kick the beacon generator.
- */
- memcpy(priv_tx->data, skb->data, skb->len);
- rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(rt2x00pci_beacon_update);
-
-/*
* TX data handlers.
*/
int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
index 3b1597f..71335e1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -88,12 +88,6 @@
}
/*
- * Beacon handlers.
- */
-int rt2x00pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ieee80211_tx_control *control);
-
-/*
* TX data handlers.
*/
int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 921eca3..52bb57d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -30,7 +30,7 @@
#include "rt2x00lib.h"
struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
- const enum ieee80211_tx_queue queue)
+ const unsigned int queue)
{
int atim = test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
@@ -40,9 +40,9 @@
if (!rt2x00dev->bcn)
return NULL;
- if (queue == IEEE80211_TX_QUEUE_BEACON)
+ if (queue == RT2X00_BCN_QUEUE_BEACON)
return &rt2x00dev->bcn[0];
- else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON && atim)
+ else if (queue == RT2X00_BCN_QUEUE_ATIM && atim)
return &rt2x00dev->bcn[1];
return NULL;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 75af48e..956e0be 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -67,6 +67,21 @@
};
/**
+ * enum rt2x00_bcn_queue: Beacon queue index
+ *
+ * Start counting with a high offset, this because this enumeration
+ * supplements &enum ieee80211_tx_queue and we should prevent value
+ * conflicts.
+ *
+ * @RT2X00_BCN_QUEUE_BEACON: Beacon queue
+ * @RT2X00_BCN_QUEUE_ATIM: Atim queue (sends frame after beacon)
+ */
+enum rt2x00_bcn_queue {
+ RT2X00_BCN_QUEUE_BEACON = 100,
+ RT2X00_BCN_QUEUE_ATIM = 101,
+};
+
+/**
* struct skb_frame_desc: Descriptor information for the skb buffer
*
* This structure is placed over the skb->cb array, this means that
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 534e164..59e87a1 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1582,11 +1582,11 @@
* TX data initialization
*/
static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- unsigned int queue)
+ const unsigned int queue)
{
u32 reg;
- if (queue == IEEE80211_TX_QUEUE_BEACON) {
+ if (queue == RT2X00_BCN_QUEUE_BEACON) {
/*
* For Wi-Fi faily generated beacons between participating
* stations. Set TBTT phase adaptive adjustment step to 8us.
@@ -2431,11 +2431,11 @@
skbdesc->entry = intf->beacon;
/*
- * Just in case the ieee80211 doesn't set this,
- * but we need this queue set for the descriptor
- * initialization.
+ * mac80211 doesn't provide the control->queue variable
+ * for beacons. Set our own queue identification so
+ * it can be used during descriptor initialization.
*/
- control->queue = IEEE80211_TX_QUEUE_BEACON;
+ control->queue = RT2X00_BCN_QUEUE_BEACON;
rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
/*
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index b519a4b..4b5bde8 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1326,11 +1326,11 @@
* TX data initialization
*/
static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- unsigned int queue)
+ const unsigned int queue)
{
u32 reg;
- if (queue != IEEE80211_TX_QUEUE_BEACON)
+ if (queue != RT2X00_BCN_QUEUE_BEACON)
return;
/*
@@ -2031,11 +2031,11 @@
skbdesc->entry = intf->beacon;
/*
- * Just in case the ieee80211 doesn't set this,
- * but we need this queue set for the descriptor
- * initialization.
+ * mac80211 doesn't provide the control->queue variable
+ * for beacons. Set our own queue identification so
+ * it can be used during descriptor initialization.
*/
- control->queue = IEEE80211_TX_QUEUE_BEACON;
+ control->queue = RT2X00_BCN_QUEUE_BEACON;
rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
/*
