diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX
index d6840a9..c34e124 100644
--- a/Documentation/blackfin/00-INDEX
+++ b/Documentation/blackfin/00-INDEX
@@ -1,9 +1,6 @@
 00-INDEX
 	- This file
 
-cache-lock.txt
-	- HOWTO for blackfin cache locking.
-
 cachefeatures.txt
 	- Supported cache features.
 
diff --git a/Documentation/blackfin/Makefile b/Documentation/blackfin/Makefile
new file mode 100644
index 0000000..773dbb1
--- /dev/null
+++ b/Documentation/blackfin/Makefile
@@ -0,0 +1,6 @@
+obj-m := gptimers-example.o
+
+all: modules
+
+modules clean:
+	$(MAKE) -C ../.. SUBDIRS=$(PWD) $@
diff --git a/Documentation/blackfin/cache-lock.txt b/Documentation/blackfin/cache-lock.txt
deleted file mode 100644
index 88ba1e6..0000000
--- a/Documentation/blackfin/cache-lock.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * File:         Documentation/blackfin/cache-lock.txt
- * Based on:
- * Author:
- *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
- *
- * Rev:          $Id: cache-lock.txt 2384 2006-11-01 04:12:43Z magicyang $
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- */
-
-How to lock your code in cache in uClinux/blackfin
---------------------------------------------------
-
-There are only a few steps required to lock your code into the cache.
-Currently you can lock the code by Way.
-
-Below are the interface provided for locking the cache.
-
-
-1. cache_grab_lock(int Ways);
-
-This function grab the lock for locking your code into the cache specified
-by Ways.
-
-
-2. cache_lock(int Ways);
-
-This function should be called after your critical code has been executed.
-Once the critical code exits, the code is now loaded into the cache. This
-function locks the code into the cache.
-
-
-So, the example sequence will be:
-
-	cache_grab_lock(WAY0_L);	/* Grab the lock */
-
-	critical_code();		/* Execute the code of interest */
-
-	cache_lock(WAY0_L);		/* Lock the cache */
-
-Where WAY0_L signifies WAY0 locking.
diff --git a/Documentation/blackfin/cachefeatures.txt b/Documentation/blackfin/cachefeatures.txt
index 0fbec23..75de51f 100644
--- a/Documentation/blackfin/cachefeatures.txt
+++ b/Documentation/blackfin/cachefeatures.txt
@@ -41,16 +41,6 @@
 		icplb_flush();
 		dcplb_flush();
 
-	- Locking the cache.
-
-		cache_grab_lock();
-		cache_lock();
-
-	Please refer linux-2.6.x/Documentation/blackfin/cache-lock.txt for how to
-	lock the cache.
-
-	Locking the cache is optional feature.
-
 	- Miscellaneous cache functions.
 
 		flush_cache_all();
diff --git a/Documentation/blackfin/gptimers-example.c b/Documentation/blackfin/gptimers-example.c
new file mode 100644
index 0000000..b1bd634
--- /dev/null
+++ b/Documentation/blackfin/gptimers-example.c
@@ -0,0 +1,83 @@
+/*
+ * Simple gptimers example
+ *	http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:gptimers
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/gptimers.h>
+#include <asm/portmux.h>
+
+/* ... random driver includes ... */
+
+#define DRIVER_NAME "gptimer_example"
+
+struct gptimer_data {
+	uint32_t period, width;
+};
+static struct gptimer_data data;
+
+/* ... random driver state ... */
+
+static irqreturn_t gptimer_example_irq(int irq, void *dev_id)
+{
+	struct gptimer_data *data = dev_id;
+
+	/* make sure it was our timer which caused the interrupt */
+	if (!get_gptimer_intr(TIMER5_id))
+		return IRQ_NONE;
+
+	/* read the width/period values that were captured for the waveform */
+	data->width = get_gptimer_pwidth(TIMER5_id);
+	data->period = get_gptimer_period(TIMER5_id);
+
+	/* acknowledge the interrupt */
+	clear_gptimer_intr(TIMER5_id);
+
+	/* tell the upper layers we took care of things */
+	return IRQ_HANDLED;
+}
+
+/* ... random driver code ... */
+
+static int __init gptimer_example_init(void)
+{
+	int ret;
+
+	/* grab the peripheral pins */
+	ret = peripheral_request(P_TMR5, DRIVER_NAME);
+	if (ret) {
+		printk(KERN_NOTICE DRIVER_NAME ": peripheral request failed\n");
+		return ret;
+	}
+
+	/* grab the IRQ for the timer */
+	ret = request_irq(IRQ_TIMER5, gptimer_example_irq, IRQF_SHARED, DRIVER_NAME, &data);
+	if (ret) {
+		printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n");
+		peripheral_free(P_TMR5);
+		return ret;
+	}
+
+	/* setup the timer and enable it */
+	set_gptimer_config(TIMER5_id, WDTH_CAP | PULSE_HI | PERIOD_CNT | IRQ_ENA);
+	enable_gptimers(TIMER5bit);
+
+	return 0;
+}
+module_init(gptimer_example_init);
+
+static void __exit gptimer_example_exit(void)
+{
+	disable_gptimers(TIMER5bit);
+	free_irq(IRQ_TIMER5, &data);
+	peripheral_free(P_TMR5);
+}
+module_exit(gptimer_example_exit);
+
+MODULE_LICENSE("BSD");
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 2180433..53c1e1d 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -32,6 +32,9 @@
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
+config GENERIC_CSUM
+	def_bool y
+
 config GENERIC_BUG
 	def_bool y
 	depends on BUG
@@ -177,7 +180,7 @@
 	help
 	  BF539 Processor Support.
 
-config BF542
+config BF542_std
 	bool "BF542"
 	help
 	  BF542 Processor Support.
@@ -187,7 +190,7 @@
 	help
 	  BF542 Processor Support.
 
-config BF544
+config BF544_std
 	bool "BF544"
 	help
 	  BF544 Processor Support.
@@ -197,7 +200,7 @@
 	help
 	  BF544 Processor Support.
 
-config BF547
+config BF547_std
 	bool "BF547"
 	help
 	  BF547 Processor Support.
@@ -207,7 +210,7 @@
 	help
 	  BF547 Processor Support.
 
-config BF548
+config BF548_std
 	bool "BF548"
 	help
 	  BF548 Processor Support.
@@ -217,7 +220,7 @@
 	help
 	  BF548 Processor Support.
 
-config BF549
+config BF549_std
 	bool "BF549"
 	help
 	  BF549 Processor Support.
@@ -311,31 +314,11 @@
 
 endchoice
 
-config BF51x
-	bool
-	depends on (BF512 || BF514 || BF516 || BF518)
-	default y
-
-config BF52x
-	bool
-	depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
-	default y
-
 config BF53x
 	bool
 	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
 	default y
 
-config BF54xM
-	bool
-	depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
-	default y
-
-config BF54x
-	bool
-	depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
-	default y
-
 config MEM_GENERIC_BOARD
 	bool
 	depends on GENERIC_BOARD
@@ -917,6 +900,12 @@
 	bool "Enable 2M DMA region"
 config DMA_UNCACHED_1M
 	bool "Enable 1M DMA region"
+config DMA_UNCACHED_512K
+	bool "Enable 512K DMA region"
+config DMA_UNCACHED_256K
+	bool "Enable 256K DMA region"
+config DMA_UNCACHED_128K
+	bool "Enable 128K DMA region"
 config DMA_UNCACHED_NONE
 	bool "Disable DMA region"
 endchoice
@@ -1278,6 +1267,8 @@
 
 source "drivers/Kconfig"
 
+source "drivers/firmware/Kconfig"
+
 source "fs/Kconfig"
 
 source "arch/blackfin/Kconfig.debug"
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index f063b77..d4c7177 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -16,6 +16,7 @@
 KBUILD_CFLAGS           += $(call cc-option,-mno-fdpic)
 KBUILD_AFLAGS           += $(call cc-option,-mno-fdpic)
 CFLAGS_MODULE    += -mlong-calls
+LDFLAGS_MODULE   += -m elf32bfin
 KALLSYMS         += --symbol-prefix=_
 
 KBUILD_DEFCONFIG := BF537-STAMP_defconfig
@@ -137,7 +138,7 @@
 
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
-BOOT_TARGETS = vmImage vmImage.bz2 vmImage.gz vmImage.lzma
+BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma
 PHONY += $(BOOT_TARGETS) install
 KBUILD_IMAGE := $(boot)/vmImage
 
@@ -151,6 +152,7 @@
 
 define archhelp
   echo  '* vmImage         - Alias to selected kernel format (vmImage.gz by default)'
+  echo  '  vmImage.bin     - Uncompressed Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bin)'
   echo  '  vmImage.bz2     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
   echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
   echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index fd9ccc5..e9c48c6 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -8,7 +8,7 @@
 
 MKIMAGE := $(srctree)/scripts/mkuboot.sh
 
-targets := vmImage vmImage.bz2 vmImage.gz vmImage.lzma
+targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma
 extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 
 quiet_cmd_uimage = UIMAGE  $@
@@ -29,6 +29,9 @@
 $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,lzma)
 
+$(obj)/vmImage.bin: $(obj)/vmlinux.bin
+	$(call if_changed,uimage,none)
+
 $(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2
 	$(call if_changed,uimage,bzip2)
 
@@ -38,6 +41,7 @@
 $(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma
 	$(call if_changed,uimage,lzma)
 
+suffix-y                      := bin
 suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index 9905b26..e315594 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -67,6 +67,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -316,6 +317,7 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -438,17 +440,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
-CONFIG_NET_DSA=y
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_TAG_STPID=y
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-CONFIG_NET_DSA_KSZ8893M=y
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 9dc6820..075e0fd 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -67,6 +67,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -321,6 +322,7 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 77e35d4..6d1a623 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -67,6 +67,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -321,6 +322,7 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 4c04480..50f9a23 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -67,6 +67,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -283,6 +284,7 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index c99bbcd0..6c60c82 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -67,6 +67,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -283,6 +284,7 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 092ffda..2908595 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -67,6 +67,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -290,6 +291,7 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -704,10 +706,7 @@
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index fa698a8..09ea249 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -67,6 +67,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -301,6 +302,7 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index f773ad1..eb3e98b 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,22 +1,29 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.31.5
+# Mon Nov  2 22:02:56 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +33,40 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,17 +87,28 @@
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -80,11 +116,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -94,13 +127,12 @@
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -137,7 +169,7 @@
 # CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
 # CONFIG_BF547M is not set
-CONFIG_BF548=y
+CONFIG_BF548_std=y
 # CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
 # CONFIG_BF549M is not set
@@ -195,7 +227,7 @@
 #
 # BF548 Specific Configuration
 #
-# CONFIG_DEB_DMA_URGENT is not set
+CONFIG_DEB_DMA_URGENT=y
 # CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set
 
 #
@@ -352,10 +384,11 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 CONFIG_DMA_UNCACHED_2M=y
@@ -366,14 +399,13 @@
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+# CONFIG_BFIN_L2_ICACHEABLE is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
 # CONFIG_BFIN_L2_DCACHEABLE is not set
 
 #
@@ -382,7 +414,7 @@
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -441,11 +473,6 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -469,13 +496,11 @@
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -493,7 +518,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -548,14 +576,10 @@
 # CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS is not set
 CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_LIB80211=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -578,6 +602,7 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -653,7 +678,6 @@
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BF5XX=y
 CONFIG_MTD_NAND_BF5XX_HWECC=y
@@ -665,6 +689,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -682,10 +711,20 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -709,10 +748,6 @@
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -729,6 +764,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -744,13 +780,34 @@
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_SMC91X is not set
-CONFIG_SMSC911X=y
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -759,6 +816,8 @@
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -771,13 +830,16 @@
 # CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=m
 CONFIG_POWEROF2_BLOCKSIZE_ONLY=y
+# CONFIG_LIBERTAS_SPI is not set
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -813,28 +875,31 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_KEYBOARD_BFIN=y
-# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_BFIN=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=m
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -844,6 +909,8 @@
 # CONFIG_TOUCHSCREEN_WM97XX is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -852,7 +919,11 @@
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_BFIN_ROTARY is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -863,16 +934,13 @@
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
@@ -890,6 +958,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -903,6 +972,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_OTP_WRITE_ENABLE is not set
@@ -951,14 +1021,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -975,13 +1040,18 @@
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -997,6 +1067,7 @@
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -1038,28 +1109,19 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1096,6 +1158,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1132,6 +1195,7 @@
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
@@ -1142,6 +1206,11 @@
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1152,7 +1221,6 @@
 #
 # ALSA Blackfin devices
 #
-# CONFIG_SND_BLACKFIN_AD1836 is not set
 # CONFIG_SND_BFIN_AD73322 is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
@@ -1160,15 +1228,17 @@
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_AC97_BUS=y
 # CONFIG_SND_BF5XX_I2S is not set
+# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=y
 CONFIG_SND_BF5XX_MMAP_SUPPORT=y
 # CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-CONFIG_SND_BF5XX_SOC_SPORT=y
-CONFIG_SND_BF5XX_SOC_AC97=y
-CONFIG_SND_BF5XX_SOC_AD1980=y
-CONFIG_SND_BF5XX_SPORT_NUM=0
 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
 CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
+CONFIG_SND_BF5XX_SOC_AD1980=y
+CONFIG_SND_BF5XX_SOC_SPORT=y
+CONFIG_SND_BF5XX_SOC_AC97=y
+CONFIG_SND_BF5XX_SPORT_NUM=0
+CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_AD1980=y
 # CONFIG_SOUND_PRIME is not set
@@ -1188,30 +1258,34 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1237,6 +1311,7 @@
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_ISP1362_HCD is not set
@@ -1267,18 +1342,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1314,7 +1388,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1326,6 +1399,13 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1380,6 +1460,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1411,10 +1492,21 @@
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1427,9 +1519,11 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1439,6 +1533,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1467,10 +1566,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1489,17 +1585,8 @@
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1508,6 +1595,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1522,7 +1610,6 @@
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1596,11 +1683,15 @@
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1608,16 +1699,21 @@
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
@@ -1625,17 +1721,16 @@
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
@@ -1657,17 +1752,15 @@
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
-CONFIG_SECURITY=y
+# CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
 
 #
@@ -1746,6 +1839,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1753,11 +1847,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1767,6 +1863,8 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
new file mode 100644
index 0000000..b9b0f93
--- /dev/null
+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -0,0 +1,1643 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31.4
+# Sat Oct 24 12:15:32 2009
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+CONFIG_EPOLL=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
+CONFIG_BF561=y
+# CONFIG_SMP is not set
+CONFIG_BF_REV_MIN=3
+CONFIG_BF_REV_MAX=5
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+CONFIG_BF_REV_0_5=y
+# CONFIG_BF_REV_0_6 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_TIMER0=10
+CONFIG_IRQ_TIMER1=10
+CONFIG_IRQ_TIMER2=10
+CONFIG_IRQ_TIMER3=10
+CONFIG_IRQ_TIMER4=10
+CONFIG_IRQ_TIMER5=10
+CONFIG_IRQ_TIMER6=10
+CONFIG_IRQ_TIMER7=10
+CONFIG_IRQ_SPI_ERROR=7
+# CONFIG_BFIN561_EZKIT is not set
+# CONFIG_BFIN561_TEPLA is not set
+# CONFIG_BFIN561_BLUETECHNIX_CM is not set
+CONFIG_BFIN561_ACVILON=y
+
+#
+# BF561 Specific Configuration
+#
+
+#
+# Core B Support
+#
+# CONFIG_BF561_COREB is not set
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA1_ERROR=7
+CONFIG_IRQ_DMA2_ERROR=7
+CONFIG_IRQ_IMDMA_ERROR=7
+CONFIG_IRQ_PPI0_ERROR=7
+CONFIG_IRQ_PPI1_ERROR=7
+CONFIG_IRQ_UART_ERROR=7
+CONFIG_IRQ_RESERVED_ERROR=7
+CONFIG_IRQ_DMA1_0=8
+CONFIG_IRQ_DMA1_1=8
+CONFIG_IRQ_DMA1_2=8
+CONFIG_IRQ_DMA1_3=8
+CONFIG_IRQ_DMA1_4=8
+CONFIG_IRQ_DMA1_5=8
+CONFIG_IRQ_DMA1_6=8
+CONFIG_IRQ_DMA1_7=8
+CONFIG_IRQ_DMA1_8=8
+CONFIG_IRQ_DMA1_9=8
+CONFIG_IRQ_DMA1_10=8
+CONFIG_IRQ_DMA1_11=8
+CONFIG_IRQ_DMA2_0=9
+CONFIG_IRQ_DMA2_1=9
+CONFIG_IRQ_DMA2_2=9
+CONFIG_IRQ_DMA2_3=9
+CONFIG_IRQ_DMA2_4=9
+CONFIG_IRQ_DMA2_5=9
+CONFIG_IRQ_DMA2_6=9
+CONFIG_IRQ_DMA2_7=9
+CONFIG_IRQ_DMA2_8=9
+CONFIG_IRQ_DMA2_9=9
+CONFIG_IRQ_DMA2_10=9
+CONFIG_IRQ_DMA2_11=9
+CONFIG_IRQ_TIMER8=10
+CONFIG_IRQ_TIMER9=10
+CONFIG_IRQ_TIMER10=10
+CONFIG_IRQ_TIMER11=10
+CONFIG_IRQ_PROG0_INTA=11
+CONFIG_IRQ_PROG0_INTB=11
+CONFIG_IRQ_PROG1_INTA=11
+CONFIG_IRQ_PROG1_INTB=11
+CONFIG_IRQ_PROG2_INTA=11
+CONFIG_IRQ_PROG2_INTB=11
+CONFIG_IRQ_DMA1_WRRD0=8
+CONFIG_IRQ_DMA1_WRRD1=8
+CONFIG_IRQ_DMA2_WRRD0=9
+CONFIG_IRQ_DMA2_WRRD1=9
+CONFIG_IRQ_IMDMA_WRRD0=12
+CONFIG_IRQ_IMDMA_WRRD1=12
+CONFIG_IRQ_WDTIMER=13
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=12000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+CONFIG_CYCLES_CLOCKSOURCE=y
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_DMA_UNCACHED_4M=y
+# CONFIG_DMA_UNCACHED_2M is not set
+# CONFIG_DMA_UNCACHED_1M is not set
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
+
+#
+# Asynchronous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+CONFIG_C_B0PEN=y
+CONFIG_C_B1PEN=y
+CONFIG_C_B2PEN=y
+# CONFIG_C_B3PEN is not set
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x99b2
+CONFIG_BANK_1=0x3350
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xAAC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_UCLINUX is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_PHRAM=y
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=y
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_BFIN_DMA_INTERFACE is not set
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
+CONFIG_BFIN_SIMPLE_TIMER=y
+# CONFIG_BFIN_SPI_ADC is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TWI_LCD is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_SERIAL_BFIN_DMA is not set
+CONFIG_SERIAL_BFIN_PIO=y
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_SPI=y
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BFIN_AD73322 is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_BF5XX_I2S=y
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
+# CONFIG_SND_BF5XX_SOC_AD73311 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
+# CONFIG_SND_BF5XX_TDM is not set
+# CONFIG_SND_BF5XX_AC97 is not set
+CONFIG_SND_BF5XX_SOC_SPORT=y
+CONFIG_SND_BF5XX_SPORT_NUM=1
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+# CONFIG_USB_EZUSB is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=y
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="cp1251"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_JFFS2_LZO=y
+# CONFIG_JFFS2_RTIME is not set
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp1251"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1251=y
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_KOI8_R=y
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_VERBOSE=y
+CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_HWERR is not set
+# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 0313cd1..e3ecdcc 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,22 +1,29 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.31.5
+# Mon Nov  2 21:59:31 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -26,22 +33,40 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -62,17 +87,28 @@
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -80,11 +116,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -94,13 +127,12 @@
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -170,6 +202,7 @@
 CONFIG_BFIN561_EZKIT=y
 # CONFIG_BFIN561_TEPLA is not set
 # CONFIG_BFIN561_BLUETECHNIX_CM is not set
+# CONFIG_BFIN561_ACVILON is not set
 
 #
 # BF561 Specific Configuration
@@ -317,10 +350,11 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -331,14 +365,13 @@
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+# CONFIG_BFIN_L2_ICACHEABLE is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_ICACHEABLE is not set
 # CONFIG_BFIN_L2_DCACHEABLE is not set
 
 #
@@ -347,7 +380,7 @@
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -407,11 +440,6 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -435,13 +463,11 @@
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -459,7 +485,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -503,13 +532,8 @@
 #
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -530,6 +554,7 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -603,6 +628,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -619,9 +649,14 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -645,9 +680,11 @@
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -656,6 +693,8 @@
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -664,7 +703,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -708,15 +750,12 @@
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
@@ -730,6 +769,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -740,6 +780,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 
 #
@@ -763,13 +804,18 @@
 # CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -782,9 +828,6 @@
 #
 # I2C GPIO expanders:
 #
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 
 #
 # PCI GPIO expanders:
@@ -822,23 +865,9 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -862,7 +891,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -870,10 +898,20 @@
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -882,9 +920,11 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -894,6 +934,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -915,10 +960,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -937,17 +979,8 @@
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -956,6 +989,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -966,7 +1000,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1034,11 +1067,15 @@
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1046,16 +1083,21 @@
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
@@ -1063,17 +1105,19 @@
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_VERBOSE=y
@@ -1095,16 +1139,15 @@
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
-CONFIG_SECURITY=y
+# CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
 
 #
@@ -1183,6 +1226,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1190,11 +1234,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1204,6 +1250,8 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 5d944ff..9e65d88 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -66,6 +66,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -275,6 +276,7 @@
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 648a31d..4432150 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -1,12 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
+# Linux kernel version: 2.6.30.5
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -15,6 +16,9 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -25,55 +29,72 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +102,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -101,7 +119,6 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -265,7 +282,10 @@
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -315,10 +335,12 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -329,10 +351,9 @@
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -343,7 +364,7 @@
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -361,7 +382,7 @@
 # EBIU_AMBCTL Control
 #
 CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x5554
+CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0xFFC0
 
@@ -386,7 +407,6 @@
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -400,11 +420,6 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -428,7 +443,6 @@
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -452,7 +466,9 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -463,13 +479,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -484,22 +495,21 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
+CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
@@ -512,9 +522,9 @@
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -526,9 +536,11 @@
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -538,7 +550,7 @@
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
+CONFIG_MTD_GPIO_ADDR=y
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -562,6 +574,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -586,12 +603,46 @@
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -613,6 +664,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -623,9 +677,11 @@
 CONFIG_BFIN_RX_DESC_NUM=20
 CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -633,6 +689,7 @@
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -641,7 +698,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -674,17 +734,13 @@
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-# CONFIG_BF5xx_EPPI is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
 CONFIG_BFIN_DMA_INTERFACE=m
-CONFIG_SIMPLE_GPIO=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BFIN_SPI_ADC is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_BFIN_JTAG_COMM is not set
@@ -698,6 +754,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -710,6 +767,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_OTP_WRITE_ENABLE is not set
@@ -758,13 +816,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -772,7 +826,6 @@
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
 
 #
@@ -780,17 +833,17 @@
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
 
 #
@@ -803,6 +856,7 @@
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
@@ -829,11 +883,13 @@
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -849,11 +905,16 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -885,6 +946,12 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -892,10 +959,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -931,20 +1002,20 @@
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
+CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
-CONFIG_USB_MON=y
+CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -952,24 +1023,24 @@
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
-CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC=m
 CONFIG_USB_MUSB_SOC=y
 
 #
 # Blackfin high speed USB Support
 #
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
 # CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_MUSB_PIO_ONLY=y
-CONFIG_MUSB_DMA_POLL=y
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
@@ -981,18 +1052,31 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
 
 #
 # USB port drivers
@@ -1013,7 +1097,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1021,9 +1104,50 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2272 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1090,6 +1214,7 @@
 #
 CONFIG_RTC_DRV_BFIN=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1102,9 +1227,10 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1114,6 +1240,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1122,8 +1253,11 @@
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1135,10 +1269,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1146,9 +1277,19 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1157,6 +1298,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1167,7 +1309,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1182,9 +1323,9 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1208,7 +1349,7 @@
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1235,55 +1376,34 @@
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB_TESTCASE is not set
 CONFIG_DEBUG_VERBOSE=y
-CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
+# CONFIG_DEBUG_MMRS is not set
 # CONFIG_DEBUG_DOUBLEFAULT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1293,9 +1413,10 @@
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CPLB_INFO is not set
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -1304,9 +1425,9 @@
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1385,6 +1506,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1392,20 +1514,24 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index ae665b9..df56639 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -1,94 +1,110 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.30.5
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -96,7 +112,7 @@
 CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
@@ -105,6 +121,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
 
 #
 # Blackfin Processor Options
@@ -113,6 +130,10 @@
 #
 # Processor and Board Settings
 #
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
 # CONFIG_BF522 is not set
 # CONFIG_BF523 is not set
 # CONFIG_BF524 is not set
@@ -125,28 +146,38 @@
 # CONFIG_BF534 is not set
 # CONFIG_BF536 is not set
 # CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=3
+CONFIG_BF_REV_MAX=6
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 # CONFIG_BF_REV_0_2 is not set
 CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 # CONFIG_BFIN533_EZKIT is not set
 # CONFIG_BFIN533_STAMP is not set
+# CONFIG_BLACKSTAMP is not set
 CONFIG_BFIN533_BLUETECHNIX_CM=y
 # CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_GENERIC_BF533_BOARD is not set
+# CONFIG_BFIN532_IP0X is not set
 
 #
 # BF533/2/1 Specific Configuration
@@ -188,6 +219,7 @@
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
@@ -207,13 +239,20 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -240,6 +279,12 @@
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -248,12 +293,16 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 # CONFIG_BFIN_GPTIMERS is not set
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -262,10 +311,9 @@
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -276,7 +324,7 @@
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -301,12 +349,8 @@
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
-# CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCCARD is not set
 
 #
 # Executable file formats
@@ -315,22 +359,19 @@
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
 #
 # CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -339,45 +380,13 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
+# CONFIG_INET is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -385,31 +394,23 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -418,20 +419,22 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -444,12 +447,15 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -460,6 +466,11 @@
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -468,12 +479,16 @@
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_UCLINUX=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -489,36 +504,25 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -526,34 +530,19 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
-# CONFIG_DM9000 is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
-# CONFIG_AX88180 is not set
 # CONFIG_NETDEV_10000 is not set
 
 #
@@ -561,22 +550,17 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -593,16 +577,15 @@
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
-# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_DMA_INTERFACE is not set
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_BFIN_SPI_ADC is not set
+# CONFIG_BFIN_SPORT is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -613,6 +596,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -623,176 +607,141 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
 
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# USB support
+# MMC/SD/SDIO Card Drivers
 #
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# Enable Host or Gadget support to see Inventra options
+# MMC/SD/SDIO Host Controller Drivers
 #
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -801,8 +750,11 @@
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=y
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -813,12 +765,8 @@
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -826,60 +774,106 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_DOUBLEFAULT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -888,34 +882,39 @@
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_TOMOYO is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
+CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index d74b6f4..22e565c 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Wed Jun  3 06:27:41 2009
+# Linux kernel version: 2.6.30.5
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -16,6 +16,9 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -26,21 +29,40 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -49,7 +71,8 @@
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
@@ -65,12 +88,13 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -78,11 +102,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -98,7 +119,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -181,7 +201,8 @@
 CONFIG_IRQ_WATCH=13
 CONFIG_IRQ_SPI=10
 # CONFIG_BFIN537_STAMP is not set
-CONFIG_BFIN537_BLUETECHNIX_CM=y
+CONFIG_BFIN537_BLUETECHNIX_CM_E=y
+# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
 # CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_CAMSIG_MINOTAUR is not set
@@ -283,10 +304,12 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 # CONFIG_BFIN_GPTIMERS is not set
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -297,10 +320,9 @@
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -311,7 +333,7 @@
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -337,6 +359,7 @@
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
 
 #
 # Executable file formats
@@ -366,11 +389,6 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -394,7 +412,6 @@
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -418,7 +435,9 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -429,8 +448,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -441,16 +460,21 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -486,22 +510,26 @@
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
 CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
 
 #
 # Mapping drivers for chip access
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_GPIO_ADDR=y
-CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -517,6 +545,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -533,9 +566,14 @@
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -549,6 +587,7 @@
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -570,6 +609,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -580,8 +622,11 @@
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
 # CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -598,7 +643,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -622,15 +670,12 @@
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
 CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_PPI is not set
 # CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_BFIN_JTAG_COMM is not set
@@ -644,6 +689,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -656,6 +702,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 
 #
@@ -668,7 +715,23 @@
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
@@ -688,15 +751,21 @@
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -758,21 +827,74 @@
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# Enable Host or Gadget support to see Inventra options
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+CONFIG_USB_GADGET_NET2272=y
+CONFIG_USB_NET2272=m
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# OTG and related infrastructure
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -789,9 +911,10 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -801,6 +924,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -809,8 +937,11 @@
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -822,10 +953,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -833,9 +961,19 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_YAFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -844,14 +982,70 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -867,14 +1061,28 @@
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEBUG_VERBOSE=y
@@ -888,9 +1096,10 @@
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -899,8 +1108,9 @@
 CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -979,6 +1189,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -986,19 +1197,24 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 7fc8dfa1..efcc90d 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -1,94 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.30.5
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -105,6 +122,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
 
 #
 # Blackfin Processor Options
@@ -113,6 +131,10 @@
 #
 # Processor and Board Settings
 #
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
 # CONFIG_BF522 is not set
 # CONFIG_BF523 is not set
 # CONFIG_BF524 is not set
@@ -125,22 +147,31 @@
 # CONFIG_BF534 is not set
 # CONFIG_BF536 is not set
 CONFIG_BF537=y
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=2
+CONFIG_BF_REV_MAX=3
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
@@ -150,7 +181,6 @@
 CONFIG_IRQ_SPORT1_RX=9
 CONFIG_IRQ_SPORT1_TX=9
 CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI=10
 CONFIG_IRQ_UART0_RX=10
 CONFIG_IRQ_UART0_TX=10
 CONFIG_IRQ_UART1_RX=10
@@ -169,11 +199,13 @@
 CONFIG_IRQ_MEM_DMA0=13
 CONFIG_IRQ_MEM_DMA1=13
 CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_SPI=10
 # CONFIG_BFIN537_STAMP is not set
-CONFIG_BFIN537_BLUETECHNIX_CM=y
+# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
+CONFIG_BFIN537_BLUETECHNIX_CM_U=y
+# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 # CONFIG_PNAV10 is not set
 # CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_GENERIC_BF537_BOARD is not set
 
 #
 # BF537 Specific Configuration
@@ -196,6 +228,7 @@
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
@@ -215,13 +248,20 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -248,6 +288,12 @@
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -256,12 +302,16 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 # CONFIG_BFIN_GPTIMERS is not set
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -270,10 +320,9 @@
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -284,7 +333,7 @@
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -309,12 +358,8 @@
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
-# CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCCARD is not set
 
 #
 # Executable file formats
@@ -323,22 +368,19 @@
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
 #
 # CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -347,10 +389,6 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -369,15 +407,13 @@
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
@@ -386,6 +422,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -395,29 +432,23 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -426,20 +457,22 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -452,12 +485,15 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -468,20 +504,29 @@
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
 
 #
 # Mapping drivers for chip access
 #
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_UCLINUX=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_GPIO_ADDR=y
+# CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -497,36 +542,36 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 
 #
-# Misc devices
+# EEPROM support
 #
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -534,35 +579,20 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_SMC91X=y
-# CONFIG_BFIN_MAC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DM9000 is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
-# CONFIG_AX88180 is not set
 # CONFIG_NETDEV_10000 is not set
 
 #
@@ -570,22 +600,17 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -602,16 +627,15 @@
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -622,6 +646,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -634,165 +659,201 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
 
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 
 #
-# Dallas's 1-wire bus
+# I2C GPIO expanders:
 #
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
 CONFIG_USB_GADGET_NET2272=y
 CONFIG_USB_NET2272=y
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
 # CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 
 #
-# LED devices
+# OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -802,25 +863,29 @@
 # CONFIG_EXT2_FS_POSIX_ACL is not set
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -829,8 +894,11 @@
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -841,12 +909,8 @@
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -854,18 +918,29 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -873,41 +948,94 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_DOUBLEFAULT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -916,34 +1044,40 @@
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_TOMOYO is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
+CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index acca4e5..7f579cf 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24.4
+# Linux kernel version: 2.6.30.5
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -16,6 +16,9 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -26,79 +29,100 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
 
 #
 # Blackfin Processor Options
@@ -107,6 +131,10 @@
 #
 # Processor and Board Settings
 #
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
 # CONFIG_BF522 is not set
 # CONFIG_BF523 is not set
 # CONFIG_BF524 is not set
@@ -119,19 +147,29 @@
 # CONFIG_BF534 is not set
 # CONFIG_BF536 is not set
 # CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
-CONFIG_BF548=y
+# CONFIG_BF547M is not set
+CONFIG_BF548_std=y
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=0
+CONFIG_BF_REV_MAX=2
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
+# CONFIG_BF_REV_0_2 is not set
 # CONFIG_BF_REV_0_3 is not set
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_0_6 is not set
+CONFIG_BF_REV_ANY=y
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF54x=y
 CONFIG_IRQ_PLL_WAKEUP=7
@@ -140,15 +178,12 @@
 CONFIG_IRQ_SPORT0_TX=9
 CONFIG_IRQ_SPORT1_RX=9
 CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_SPI0=10
 CONFIG_IRQ_UART0_RX=10
 CONFIG_IRQ_UART0_TX=10
 CONFIG_IRQ_UART1_RX=10
 CONFIG_IRQ_UART1_TX=10
 CONFIG_IRQ_CNT=8
-CONFIG_IRQ_USB_INT0=11
-CONFIG_IRQ_USB_INT1=11
-CONFIG_IRQ_USB_INT2=11
-CONFIG_IRQ_USB_DMA=11
 CONFIG_IRQ_TIMER0=11
 CONFIG_IRQ_TIMER1=11
 CONFIG_IRQ_TIMER2=11
@@ -157,9 +192,21 @@
 CONFIG_IRQ_TIMER5=11
 CONFIG_IRQ_TIMER6=11
 CONFIG_IRQ_TIMER7=11
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
 CONFIG_IRQ_TIMER8=11
 CONFIG_IRQ_TIMER9=11
 CONFIG_IRQ_TIMER10=11
+CONFIG_IRQ_SPORT2_RX=9
+CONFIG_IRQ_SPORT2_TX=9
+CONFIG_IRQ_SPORT3_RX=9
+CONFIG_IRQ_SPORT3_TX=9
+CONFIG_IRQ_SPI1=10
+CONFIG_IRQ_SPI2=10
+CONFIG_IRQ_TWI0=11
+CONFIG_IRQ_TWI1=11
 # CONFIG_BFIN548_EZKIT is not set
 CONFIG_BFIN548_BLUETECHNIX_CM=y
 
@@ -167,6 +214,7 @@
 # BF548 Specific Configuration
 #
 # CONFIG_DEB_DMA_URGENT is not set
+# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set
 
 #
 # Interrupt Priority Assignment
@@ -182,7 +230,6 @@
 CONFIG_IRQ_SPI0_ERR=7
 CONFIG_IRQ_UART0_ERR=7
 CONFIG_IRQ_EPPI0=8
-CONFIG_IRQ_SPI0=10
 CONFIG_IRQ_PINT0=12
 CONFIG_IRQ_PINT1=12
 CONFIG_IRQ_MDMAS0=13
@@ -197,18 +244,10 @@
 CONFIG_IRQ_UART1_ERR=7
 CONFIG_IRQ_UART2_ERR=7
 CONFIG_IRQ_CAN0_ERR=7
-CONFIG_IRQ_SPORT2_RX=9
-CONFIG_IRQ_SPORT2_TX=9
-CONFIG_IRQ_SPORT3_RX=9
-CONFIG_IRQ_SPORT3_TX=9
 CONFIG_IRQ_EPPI1=9
 CONFIG_IRQ_EPPI2=9
-CONFIG_IRQ_SPI1=10
-CONFIG_IRQ_SPI2=10
 CONFIG_IRQ_ATAPI_RX=10
 CONFIG_IRQ_ATAPI_TX=10
-CONFIG_IRQ_TWI0=11
-CONFIG_IRQ_TWI1=11
 CONFIG_IRQ_CAN0_RX=11
 CONFIG_IRQ_CAN0_TX=11
 CONFIG_IRQ_MDMAS2=13
@@ -255,6 +294,7 @@
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
@@ -274,16 +314,12 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_GENERIC_TIME is not set
-# CONFIG_TICK_ONESHOT is not set
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=64
-# CONFIG_MEM_MT46V32M16_6T is not set
-CONFIG_MEM_MT46V32M16_5B=y
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -310,6 +346,12 @@
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -318,13 +360,16 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 # CONFIG_BFIN_GPTIMERS is not set
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -333,14 +378,13 @@
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+# CONFIG_BFIN_L2_ICACHEABLE is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_EXTMEM_WRITEBACK
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
 # CONFIG_BFIN_L2_DCACHEABLE is not set
 
 #
@@ -349,7 +393,7 @@
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -369,7 +413,7 @@
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B2
+CONFIG_BANK_3=0x99B3
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
@@ -377,7 +421,6 @@
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
-# CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -388,23 +431,19 @@
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # CPU Frequency scaling
 #
 # CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -417,6 +456,7 @@
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -435,19 +475,16 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
@@ -456,6 +493,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -465,24 +503,21 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -501,10 +536,12 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -539,6 +576,7 @@
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
 CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
@@ -549,9 +587,8 @@
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -575,6 +612,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -587,31 +629,31 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
+CONFIG_SCSI=m
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SD=m
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
 
@@ -632,29 +674,54 @@
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_SMC91X is not set
-CONFIG_SMSC911X=y
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -666,6 +733,10 @@
 # CONFIG_WLAN_80211 is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -676,7 +747,6 @@
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -711,6 +781,7 @@
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_BFIN is not set
 # CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -726,19 +797,16 @@
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
+# CONFIG_BFIN_JTAG_COMM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -749,10 +817,11 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
+# CONFIG_SERIAL_BFIN_DMA is not set
+CONFIG_SERIAL_BFIN_PIO=y
 # CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
 # CONFIG_BFIN_UART1_CTSRTS is not set
@@ -762,7 +831,10 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -770,61 +842,53 @@
 # CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -832,64 +896,23 @@
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -903,25 +926,43 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
-# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -935,80 +976,75 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
+# CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
+CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
-CONFIG_USB_MUSB_HDRC=y
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
 CONFIG_USB_MUSB_SOC=y
 
 #
-# Blackfin BF54x, BF525 and BF527 high speed USB support
+# Blackfin high speed USB Support
 #
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
 # CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
 # CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
+CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_MUSB_LOGLEVEL=0
+# CONFIG_USB_MUSB_DEBUG is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
-CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1016,6 +1052,7 @@
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1023,15 +1060,10 @@
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1040,7 +1072,7 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1048,7 +1080,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1056,38 +1087,75 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2272 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
 
 #
-# USB DSL modem support
+# OTG and related infrastructure
 #
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=y
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
-CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
-CONFIG_SDH_BFIN=y
+# CONFIG_MMC_SDHCI is not set
+CONFIG_SDH_BFIN=m
+# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
+# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
 # CONFIG_MMC_SPI is not set
-# CONFIG_SPI_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
 
 #
 # RTC interfaces
@@ -1111,66 +1179,74 @@
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_BFIN=y
-
-#
-# Userspace I/O
-#
+CONFIG_RTC_DRV_BFIN=m
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
+# CONFIG_ISO9660_FS is not set
 # CONFIG_UDF_FS is not set
 
 #
@@ -1194,10 +1270,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1205,17 +1278,7 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_FS_WBUF_VERIFY is not set
@@ -1227,34 +1290,30 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-CONFIG_CIFS=y
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
@@ -1267,24 +1326,8 @@
 #
 # Partition Types
 #
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+# CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -1326,9 +1369,6 @@
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1336,14 +1376,39 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
-CONFIG_DEBUG_MMRS=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
+# CONFIG_DEBUG_MMRS is not set
+# CONFIG_DEBUG_DOUBLEFAULT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -1352,33 +1417,125 @@
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index bae4ee6..a6df01d 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -1,15 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24.4
-# Tue Apr  1 10:50:11 2008
+# Linux kernel version: 2.6.30.5
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -17,6 +16,9 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -27,62 +29,83 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -99,6 +122,7 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
 
 #
 # Blackfin Processor Options
@@ -107,6 +131,10 @@
 #
 # Processor and Board Settings
 #
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
 # CONFIG_BF522 is not set
 # CONFIG_BF523 is not set
 # CONFIG_BF524 is not set
@@ -119,30 +147,47 @@
 # CONFIG_BF534 is not set
 # CONFIG_BF536 is not set
 # CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 CONFIG_BF561=y
+# CONFIG_SMP is not set
+CONFIG_BF_REV_MIN=3
+CONFIG_BF_REV_MAX=5
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 # CONFIG_BF_REV_0_2 is not set
 CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BFIN_DUAL_CORE=y
 CONFIG_MEM_MT48LC8M32B2B5_7=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_SPORT0_ERROR=7
 CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_TIMER0=10
+CONFIG_IRQ_TIMER1=10
+CONFIG_IRQ_TIMER2=10
+CONFIG_IRQ_TIMER3=10
+CONFIG_IRQ_TIMER4=10
+CONFIG_IRQ_TIMER5=10
+CONFIG_IRQ_TIMER6=10
+CONFIG_IRQ_TIMER7=10
 CONFIG_IRQ_SPI_ERROR=7
 # CONFIG_BFIN561_EZKIT is not set
 # CONFIG_BFIN561_TEPLA is not set
 CONFIG_BFIN561_BLUETECHNIX_CM=y
-# CONFIG_GENERIC_BF561_BOARD is not set
 
 #
 # BF561 Specific Configuration
@@ -151,12 +196,7 @@
 #
 # Core B Support
 #
-
-#
-# Core B Support
-#
 CONFIG_BF561_COREB=y
-# CONFIG_BF561_COREB_RESET is not set
 
 #
 # Interrupt Priority Assignment
@@ -196,14 +236,6 @@
 CONFIG_IRQ_DMA2_9=9
 CONFIG_IRQ_DMA2_10=9
 CONFIG_IRQ_DMA2_11=9
-CONFIG_IRQ_TIMER0=10
-CONFIG_IRQ_TIMER1=10
-CONFIG_IRQ_TIMER2=10
-CONFIG_IRQ_TIMER3=10
-CONFIG_IRQ_TIMER4=10
-CONFIG_IRQ_TIMER5=10
-CONFIG_IRQ_TIMER6=10
-CONFIG_IRQ_TIMER7=10
 CONFIG_IRQ_TIMER8=10
 CONFIG_IRQ_TIMER9=10
 CONFIG_IRQ_TIMER10=10
@@ -226,6 +258,7 @@
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
@@ -245,19 +278,20 @@
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_TICK_ONESHOT is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -284,6 +318,12 @@
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -292,14 +332,16 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-CONFIG_LARGE_ALLOCS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 # CONFIG_BFIN_GPTIMERS is not set
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -308,15 +350,16 @@
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+# CONFIG_BFIN_L2_ICACHEABLE is not set
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
 # CONFIG_BFIN_L2_DCACHEABLE is not set
+# CONFIG_BFIN_L2_WRITEBACK is not set
+# CONFIG_BFIN_L2_WRITETHROUGH is not set
 
 #
 # Memory Protection Unit
@@ -324,7 +367,7 @@
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -353,8 +396,8 @@
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
-# CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
 
 #
 # Executable file formats
@@ -363,18 +406,19 @@
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
-# Networking
+# CPU Frequency scaling
 #
+# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
 
 #
@@ -383,10 +427,6 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -407,14 +447,11 @@
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
@@ -423,6 +460,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -432,24 +470,21 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -460,16 +495,22 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -487,8 +528,10 @@
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -499,20 +542,29 @@
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_UCLINUX=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -528,6 +580,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -539,14 +596,21 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
-# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE0 is not set
-# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE1 is not set
 
 #
 # SCSI device support
@@ -558,26 +622,50 @@
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMSC911X=m
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
-# CONFIG_AX88180 is not set
 # CONFIG_NETDEV_10000 is not set
 
 #
@@ -585,10 +673,13 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -609,16 +700,15 @@
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -629,6 +719,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -639,6 +730,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 
 #
@@ -647,54 +739,100 @@
 # CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
 
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -709,42 +847,85 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# Enable Host or Gadget support to see Inventra options
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+CONFIG_USB_GADGET_NET2272=y
+CONFIG_USB_NET2272=m
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# USB Gadget Support
+# MMC/SD/SDIO Card Drivers
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -754,25 +935,29 @@
 # CONFIG_EXT2_FS_POSIX_ACL is not set
 # CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -781,8 +966,11 @@
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -794,10 +982,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -805,14 +990,28 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -827,11 +1026,47 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -839,14 +1074,40 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_DOUBLEFAULT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -855,33 +1116,40 @@
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DUAL_CORE_TEST_MODULE is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_TOMOYO is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index a6a7c8e..bc7fae3 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -67,6 +67,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -249,6 +250,7 @@
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 1ec9ae2..a7e49d6 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -68,6 +68,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -261,6 +262,7 @@
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 # CONFIG_BFIN_GPTIMERS is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index ff377fa..67d1276 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -63,6 +63,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
@@ -285,6 +286,7 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 814f9ca..52bfa6b 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -72,6 +72,7 @@
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -271,6 +272,7 @@
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_DMA_UNCACHED_2M=y
 # CONFIG_DMA_UNCACHED_1M is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -700,7 +702,7 @@
 # CONFIG_INPUT_YEALINK is not set
 CONFIG_INPUT_UINPUT=y
 # CONFIG_BF53X_PFBUTTONS is not set
-# CONFIG_TWI_KEYPAD is not set
+# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 375e75a..60adfad 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Jan  6 09:22:17 2009
+# Linux kernel version: 2.6.30.5
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -16,6 +16,9 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -26,49 +29,72 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -76,11 +102,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -96,7 +119,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -128,10 +150,15 @@
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=2
 CONFIG_BF_REV_MAX=3
@@ -173,11 +200,11 @@
 CONFIG_IRQ_WATCH=13
 CONFIG_IRQ_SPI=10
 # CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
 CONFIG_BFIN537_BLUETECHNIX_TCM=y
 # CONFIG_PNAV10 is not set
 # CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_GENERIC_BF537_BOARD is not set
 
 #
 # BF537 Specific Configuration
@@ -223,7 +250,10 @@
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -273,10 +303,12 @@
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 # CONFIG_BFIN_GPTIMERS is not set
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -287,10 +319,9 @@
 # Cache Support
 #
 CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
 CONFIG_BFIN_EXTMEM_DCACHEABLE=y
 CONFIG_BFIN_EXTMEM_WRITEBACK=y
 # CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -301,7 +332,7 @@
 # CONFIG_MPU is not set
 
 #
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
 #
 
 #
@@ -327,6 +358,7 @@
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
 
 #
 # Executable file formats
@@ -343,13 +375,83 @@
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
 #
 # CONFIG_CPU_FREQ is not set
-# CONFIG_NET is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -358,15 +460,21 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -402,9 +510,10 @@
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
 CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
 
 #
@@ -413,7 +522,7 @@
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_GPIO_ADDR=y
-CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -436,6 +545,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -443,15 +557,23 @@
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -464,6 +586,74 @@
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_MAC_USE_L1=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+# CONFIG_BFIN_MAC_RMII is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
 #
@@ -480,15 +670,12 @@
 #
 # Character devices
 #
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
 CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BFIN_SPI_ADC is not set
+CONFIG_BFIN_SPORT=y
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_BFIN_JTAG_COMM is not set
@@ -502,6 +689,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
 CONFIG_SERIAL_BFIN_DMA=y
@@ -514,6 +702,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 
 #
@@ -534,39 +723,17 @@
 #
 CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -580,6 +747,12 @@
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -588,7 +761,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -598,6 +771,7 @@
 # Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
 # CONFIG_VIDEO_MEDIA is not set
 
 #
@@ -618,13 +792,81 @@
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+CONFIG_USB_GADGET_NET2272=y
+CONFIG_USB_NET2272=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -641,8 +883,10 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -652,6 +896,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -660,8 +909,11 @@
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -673,10 +925,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -684,9 +933,19 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -695,13 +954,62 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
@@ -714,12 +1022,30 @@
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEBUG_VERBOSE=y
@@ -733,9 +1059,10 @@
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
 
 #
 # Security options
@@ -744,20 +1071,110 @@
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index 10064f9..e6485c3 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -11,9 +11,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm/sections.h>
-#include <asm/ptrace.h>
-#include <asm/user.h>
 #include <linux/linkage.h>
 #include <linux/types.h>
 
@@ -23,6 +20,12 @@
 # define DMA_UNCACHED_REGION (2 * 1024 * 1024)
 #elif defined(CONFIG_DMA_UNCACHED_1M)
 # define DMA_UNCACHED_REGION (1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_512K)
+# define DMA_UNCACHED_REGION (512 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_256K)
+# define DMA_UNCACHED_REGION (256 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_128K)
+# define DMA_UNCACHED_REGION (128 * 1024)
 #else
 # define DMA_UNCACHED_REGION (0)
 #endif
@@ -35,6 +38,7 @@
 extern unsigned long sclk_to_usecs(unsigned long sclk);
 extern unsigned long usecs_to_sclk(unsigned long usecs);
 
+struct pt_regs;
 extern void dump_bfin_process(struct pt_regs *regs);
 extern void dump_bfin_mem(struct pt_regs *regs);
 extern void dump_bfin_trace_buffer(void);
diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h
index 6f4548a..75f6dc3 100644
--- a/arch/blackfin/include/asm/bug.h
+++ b/arch/blackfin/include/asm/bug.h
@@ -47,7 +47,7 @@
 #define BUG()								\
 	do {								\
 		_BUG_OR_WARN(0);					\
-		for (;;);						\
+		unreachable();						\
 	} while (0)
 
 #define WARN_ON(condition)							\
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index 417eaac..2666ff8 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -10,6 +10,7 @@
 #define _BLACKFIN_CACHEFLUSH_H
 
 #include <asm/blackfin.h>	/* for SSYNC() */
+#include <asm/sections.h>	/* for _ramend */
 
 extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address);
 extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address);
diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h
index a23415b..623cc7f 100644
--- a/arch/blackfin/include/asm/checksum.h
+++ b/arch/blackfin/include/asm/checksum.h
@@ -9,63 +9,12 @@
 #define _BFIN_CHECKSUM_H
 
 /*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy(const void *src, void *dst,
-			       int len, __wsum sum);
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-					  int len, __wsum sum, int *csum_err);
-
-#define csum_partial_copy_nocheck(src, dst, len, sum)	\
-	csum_partial_copy((src), (dst), (len), (sum))
-
-__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	while (sum >> 16)
-		sum = (sum & 0xffff) + (sum >> 16);
-	return ((~(sum << 16)) >> 16);
-}
-
-/*
  * computes the checksum of the TCP/UDP pseudo-header
  * returns a 16-bit checksum, already complemented
  */
 
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+__csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		   unsigned short proto, __wsum sum)
 {
 	unsigned int carry;
@@ -88,19 +37,8 @@
 
 	return (sum);
 }
+#define csum_tcpudp_nofold __csum_tcpudp_nofold
 
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
+#include <asm-generic/checksum.h>
 
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#endif				/* _BFIN_CHECKSUM_H */
+#endif
diff --git a/arch/blackfin/include/asm/clocks.h b/arch/blackfin/include/asm/clocks.h
index f80dad5..6f0b618 100644
--- a/arch/blackfin/include/asm/clocks.h
+++ b/arch/blackfin/include/asm/clocks.h
@@ -9,6 +9,8 @@
 #ifndef _BFIN_CLOCKS_H
 #define _BFIN_CLOCKS_H
 
+#include <asm/dpmc.h>
+
 #ifdef CONFIG_CCLK_DIV_1
 # define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
 # define CONFIG_CCLK_DIV 1
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index 7a23d82..f9172ff 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -7,9 +7,9 @@
 #ifndef _BLACKFIN_DMA_MAPPING_H
 #define _BLACKFIN_DMA_MAPPING_H
 
-#include <asm/scatterlist.h>
+#include <asm/cacheflush.h>
+struct scatterlist;
 
-void dma_alloc_init(unsigned long start, unsigned long end);
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			 dma_addr_t *dma_handle, gfp_t gfp);
 void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
@@ -20,13 +20,51 @@
  */
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_supported(d, m)         (1)
+#define dma_get_cache_alignment()   (32)
+#define dma_is_consistent(d, h)     (1)
 
-static inline
-int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+static inline int
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
 
+extern void
+__dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir);
+static inline void
+_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	if (!__builtin_constant_p(dir)) {
+		__dma_sync(addr, size, dir);
+		return;
+	}
+
+	switch (dir) {
+	case DMA_NONE:
+		BUG();
+	case DMA_TO_DEVICE:		/* writeback only */
+		flush_dcache_range(addr, addr + size);
+		break;
+	case DMA_FROM_DEVICE: /* invalidate only */
+	case DMA_BIDIRECTIONAL: /* flush and invalidate */
+		/* Blackfin has no dedicated invalidate (it includes a flush) */
+		invalidate_dcache_range(addr, addr + size);
+		break;
+	}
+}
+
 /*
  * Map a single buffer of the indicated size for DMA in streaming mode.
  * The 32-bit bus address to use is returned.
@@ -34,8 +72,13 @@
  * Once the device is given the dma address, the device owns this memory
  * until either pci_unmap_single or pci_dma_sync_single is performed.
  */
-extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
-				 enum dma_data_direction direction);
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction dir)
+{
+	_dma_sync((dma_addr_t)ptr, size, dir);
+	return (dma_addr_t) ptr;
+}
 
 static inline dma_addr_t
 dma_map_page(struct device *dev, struct page *page,
@@ -53,8 +96,12 @@
  * After this call, reads by the cpu to the buffer are guarenteed to see
  * whatever the device wrote there.
  */
-extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-			  enum dma_data_direction direction);
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction dir)
+{
+	BUG_ON(!valid_dma_direction(dir));
+}
 
 static inline void
 dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
@@ -80,38 +127,66 @@
  * the same here.
  */
 extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		      enum dma_data_direction direction);
+		      enum dma_data_direction dir);
 
 /*
  * Unmap a set of streaming mode DMA translations.
  * Again, cpu read rules concerning calls here are the same as for
  * pci_unmap_single() above.
  */
-extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-		      int nhwentries, enum dma_data_direction direction);
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-					dma_addr_t handle, size_t size,
-					enum dma_data_direction dir)
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+	     int nhwentries, enum dma_data_direction dir)
 {
+	BUG_ON(!valid_dma_direction(dir));
 }
 
-static inline void dma_sync_single_for_device(struct device *dev,
-					dma_addr_t handle, size_t size,
-					enum dma_data_direction dir)
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction dir)
 {
+	BUG_ON(!valid_dma_direction(dir));
 }
 
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-					struct scatterlist *sg,
-					int nents, enum dma_data_direction dir)
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction dir)
 {
+	_dma_sync(handle + offset, size, dir);
 }
 
-static inline void dma_sync_sg_for_device(struct device *dev,
-					struct scatterlist *sg,
-					int nents, enum dma_data_direction dir)
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
+			enum dma_data_direction dir)
 {
+	dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
+			   enum dma_data_direction dir)
+{
+	dma_sync_single_range_for_device(dev, handle, 0, size, dir);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
+		    enum dma_data_direction dir)
+{
+	BUG_ON(!valid_dma_direction(dir));
+}
+
+extern void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+		       int nents, enum dma_data_direction dir);
+
+static inline void
+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	       enum dma_data_direction dir)
+{
+	_dma_sync((dma_addr_t)vaddr, size, dir);
 }
 
 #endif				/* _BLACKFIN_DMA_MAPPING_H */
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index c9a5962..bd2e622 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -10,46 +10,70 @@
 
 #include <linux/interrupt.h>
 #include <mach/dma.h>
+#include <asm/atomic.h>
 #include <asm/blackfin.h>
 #include <asm/page.h>
+#include <asm-generic/dma.h>
 
-#define MAX_DMA_ADDRESS PAGE_OFFSET
+/* DMA_CONFIG Masks */
+#define DMAEN			0x0001	/* DMA Channel Enable */
+#define WNR				0x0002	/* Channel Direction (W/R*) */
+#define WDSIZE_8		0x0000	/* Transfer Word Size = 8 */
+#define WDSIZE_16		0x0004	/* Transfer Word Size = 16 */
+#define WDSIZE_32		0x0008	/* Transfer Word Size = 32 */
+#define DMA2D			0x0010	/* DMA Mode (2D/1D*) */
+#define RESTART			0x0020	/* DMA Buffer Clear */
+#define DI_SEL			0x0040	/* Data Interrupt Timing Select */
+#define DI_EN			0x0080	/* Data Interrupt Enable */
+#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1 */
+#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2 */
+#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3 */
+#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4 */
+#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5 */
+#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6 */
+#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7 */
+#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8 */
+#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9 */
+#define NDSIZE			0x0f00	/* Next Descriptor Size */
+#define DMAFLOW			0x7000	/* Flow Control */
+#define DMAFLOW_STOP	0x0000	/* Stop Mode */
+#define DMAFLOW_AUTO	0x1000	/* Autobuffer Mode */
+#define DMAFLOW_ARRAY	0x4000	/* Descriptor Array Mode */
+#define DMAFLOW_SMALL	0x6000	/* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE	0x7000	/* Large Model Descriptor List Mode */
 
-/*****************************************************************************
-*        Generic DMA  Declarations
-*
-****************************************************************************/
-enum dma_chan_status {
-	DMA_CHANNEL_FREE,
-	DMA_CHANNEL_REQUESTED,
-	DMA_CHANNEL_ENABLED,
-};
+/* DMA_IRQ_STATUS Masks */
+#define DMA_DONE		0x0001	/* DMA Completion Interrupt Status */
+#define DMA_ERR			0x0002	/* DMA Error Interrupt Status */
+#define DFETCH			0x0004	/* DMA Descriptor Fetch Indicator */
+#define DMA_RUN			0x0008	/* DMA Channel Running Indicator */
 
 /*-------------------------
  * config reg bits value
  *-------------------------*/
-#define DATA_SIZE_8 		0
-#define DATA_SIZE_16 		1
-#define DATA_SIZE_32 		2
+#define DATA_SIZE_8			0
+#define DATA_SIZE_16		1
+#define DATA_SIZE_32		2
 
-#define DMA_FLOW_STOP 		0
-#define DMA_FLOW_AUTO 		1
-#define DMA_FLOW_ARRAY 		4
-#define DMA_FLOW_SMALL 		6
-#define DMA_FLOW_LARGE 		7
+#define DMA_FLOW_STOP		0
+#define DMA_FLOW_AUTO		1
+#define DMA_FLOW_ARRAY		4
+#define DMA_FLOW_SMALL		6
+#define DMA_FLOW_LARGE		7
 
-#define DIMENSION_LINEAR    0
-#define DIMENSION_2D           1
+#define DIMENSION_LINEAR	0
+#define DIMENSION_2D		1
 
-#define DIR_READ     0
-#define DIR_WRITE    1
+#define DIR_READ			0
+#define DIR_WRITE			1
 
-#define INTR_DISABLE   0
-#define INTR_ON_BUF    2
-#define INTR_ON_ROW    3
+#define INTR_DISABLE		0
+#define INTR_ON_BUF			2
+#define INTR_ON_ROW			3
 
 #define DMA_NOSYNC_KEEP_DMA_BUF	0
-#define DMA_SYNC_RESTART	1
+#define DMA_SYNC_RESTART		1
 
 struct dmasg {
 	void *next_desc_addr;
@@ -104,11 +128,9 @@
 
 };
 
-struct mutex;
 struct dma_channel {
-	struct mutex dmalock;
 	const char *device_id;
-	enum dma_chan_status chan_status;
+	atomic_t chan_status;
 	volatile struct dma_register *regs;
 	struct dmasg *sg;		/* large mode descriptor */
 	unsigned int irq;
@@ -220,27 +242,20 @@
 
 static inline int dma_channel_active(unsigned int channel)
 {
-	if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE)
-		return 0;
-	else
-		return 1;
+	return atomic_read(&dma_ch[channel].chan_status);
 }
 
 static inline void disable_dma(unsigned int channel)
 {
 	dma_ch[channel].regs->cfg &= ~DMAEN;
 	SSYNC();
-	dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED;
 }
 static inline void enable_dma(unsigned int channel)
 {
 	dma_ch[channel].regs->curr_x_count = 0;
 	dma_ch[channel].regs->curr_y_count = 0;
 	dma_ch[channel].regs->cfg |= DMAEN;
-	dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED;
 }
-void free_dma(unsigned int channel);
-int request_dma(unsigned int channel, const char *device_id);
 int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data);
 
 static inline void dma_disable_irq(unsigned int channel)
diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index 925e66c..1597ae5 100644
--- a/arch/blackfin/include/asm/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -1,7 +1,7 @@
 /*
  * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
  *
- * Copyright (C) 2004-2008 Analog Device Inc.
+ * Copyright (C) 2004-2009 Analog Device Inc.
  *
  * Licensed under the GPL-2
  */
@@ -9,7 +9,109 @@
 #ifndef _BLACKFIN_DPMC_H_
 #define _BLACKFIN_DPMC_H_
 
-#ifdef __KERNEL__
+/* PLL_CTL Masks */
+#define DF			0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
+#define PLL_OFF			0x0002	/* PLL Not Powered */
+#define STOPCK			0x0008	/* Core Clock Off */
+#define PDWN			0x0020	/* Enter Deep Sleep Mode */
+#ifdef __ADSPBF539__
+# define IN_DELAY		0x0014	/* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY		0x00C0	/* Add 200ps Delay To EBIU Output Signals */
+#else
+# define IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals */
+#endif
+#define BYPASS			0x0100	/* Bypass the PLL */
+#define MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors */
+#define SPORT_HYST		0x8000	/* Enable Additional Hysteresis on SPORT Input Pins */
+#define SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
+
+/* PLL_DIV Masks */
+#define SSEL			0x000F	/* System Select */
+#define CSEL			0x0030	/* Core Select */
+#define CSEL_DIV1		0x0000	/* CCLK = VCO / 1 */
+#define CSEL_DIV2		0x0010	/* CCLK = VCO / 2 */
+#define CSEL_DIV4		0x0020	/* CCLK = VCO / 4 */
+#define CSEL_DIV8		0x0030	/* CCLK = VCO / 8 */
+
+#define CCLK_DIV1 CSEL_DIV1
+#define CCLK_DIV2 CSEL_DIV2
+#define CCLK_DIV4 CSEL_DIV4
+#define CCLK_DIV8 CSEL_DIV8
+
+#define SET_SSEL(x)	((x) & 0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
+#define SCLK_DIV(x)	(x)		/* SCLK = VCO / x */
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled */
+#define FULL_ON			0x0002	/* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled */
+#define PLL_LOCKED		0x0020	/* PLL_LOCKCNT Has Been Reached */
+
+#define RTCWS			0x0400	/* RTC/Reset Wake-Up Status */
+#define CANWS			0x0800	/* CAN Wake-Up Status */
+#define USBWS			0x2000	/* USB Wake-Up Status */
+#define KPADWS			0x4000	/* Keypad Wake-Up Status */
+#define ROTWS			0x8000	/* Rotary Wake-Up Status */
+#define GPWS			0x1000	/* General-Purpose Wake-Up Status */
+
+/* VR_CTL Masks */
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define FREQ			0x3000	/* Switching Oscillator Frequency For Regulator */
+#define FREQ_1000		0x3000	/* Switching Frequency Is 1 MHz */
+#else
+#define FREQ			0x0003	/* Switching Oscillator Frequency For Regulator */
+#define FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
+#define FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
+#define FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
+#endif
+#define HIBERNATE		0x0000	/* Powerdown/Bypass On-Board Regulation */
+
+#define GAIN			0x000C	/* Voltage Level Gain */
+#define GAIN_5			0x0000	/* GAIN = 5 */
+#define GAIN_10			0x0004	/* GAIN = 1 */
+#define GAIN_20			0x0008	/* GAIN = 2 */
+#define GAIN_50			0x000C	/* GAIN = 5 */
+
+#define VLEV			0x00F0	/* Internal Voltage Level */
+#ifdef __ADSPBF52x__
+#define VLEV_085 		0x0040	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090		0x0050	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095		0x0060	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100		0x0070	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105		0x0080	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110		0x0090	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115		0x00A0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120		0x00B0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#else
+#define VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
+#endif
+
+#define WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
+#define CANWE			0x0200	/* Enable CAN Wakeup From Hibernate */
+#define PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate */
+#define GPWE			0x0400	/* General-Purpose Wake-Up Enable */
+#define MXVRWE			0x0400	/* Enable MXVR Wakeup From Hibernate */
+#define KPADWE			0x1000	/* Keypad Wake-Up Enable */
+#define ROTWE			0x2000	/* Rotary Wake-Up Enable */
+#define CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
+#define SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
+
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define USBWE			0x0200	/* Enable USB Wakeup From Hibernate */
+#else
+#define USBWE			0x0800	/* Enable USB Wakeup From Hibernate */
+#endif
+
 #ifndef __ASSEMBLY__
 
 void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
@@ -54,6 +156,5 @@
 	w[P0 + (x - PLL_CTL)] = R0;\
 
 #endif
-#endif	/* __KERNEL__ */
 
 #endif	/*_BLACKFIN_DPMC_H_*/
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 5b44d05..539468a 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -159,6 +159,11 @@
 };
 #endif
 
+#ifdef BFIN_SPECIAL_GPIO_BANKS
+void bfin_special_gpio_free(unsigned gpio);
+int bfin_special_gpio_request(unsigned gpio, const char *label);
+#endif
+
 #ifdef CONFIG_PM
 
 unsigned int bfin_pm_standby_setup(void);
diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h
index 89f08dec..c722acd 100644
--- a/arch/blackfin/include/asm/gptimers.h
+++ b/arch/blackfin/include/asm/gptimers.h
@@ -172,25 +172,25 @@
 
 /* The actual gptimer API */
 
-void     set_gptimer_pwidth(int timer_id, uint32_t width);
-uint32_t get_gptimer_pwidth(int timer_id);
-void     set_gptimer_period(int timer_id, uint32_t period);
-uint32_t get_gptimer_period(int timer_id);
-uint32_t get_gptimer_count(int timer_id);
-int      get_gptimer_intr(int timer_id);
-void     clear_gptimer_intr(int timer_id);
-int      get_gptimer_over(int timer_id);
-void     clear_gptimer_over(int timer_id);
-void     set_gptimer_config(int timer_id, uint16_t config);
-uint16_t get_gptimer_config(int timer_id);
-int      get_gptimer_run(int timer_id);
-void     set_gptimer_pulse_hi(int timer_id);
-void     clear_gptimer_pulse_hi(int timer_id);
+void     set_gptimer_pwidth(unsigned int timer_id, uint32_t width);
+uint32_t get_gptimer_pwidth(unsigned int timer_id);
+void     set_gptimer_period(unsigned int timer_id, uint32_t period);
+uint32_t get_gptimer_period(unsigned int timer_id);
+uint32_t get_gptimer_count(unsigned int timer_id);
+int      get_gptimer_intr(unsigned int timer_id);
+void     clear_gptimer_intr(unsigned int timer_id);
+int      get_gptimer_over(unsigned int timer_id);
+void     clear_gptimer_over(unsigned int timer_id);
+void     set_gptimer_config(unsigned int timer_id, uint16_t config);
+uint16_t get_gptimer_config(unsigned int timer_id);
+int      get_gptimer_run(unsigned int timer_id);
+void     set_gptimer_pulse_hi(unsigned int timer_id);
+void     clear_gptimer_pulse_hi(unsigned int timer_id);
 void     enable_gptimers(uint16_t mask);
 void     disable_gptimers(uint16_t mask);
 void     disable_gptimers_sync(uint16_t mask);
 uint16_t get_enabled_gptimers(void);
-uint32_t get_gptimer_status(int group);
-void     set_gptimer_status(int group, uint32_t value);
+uint32_t get_gptimer_status(unsigned int group);
+void     set_gptimer_status(unsigned int group, uint32_t value);
 
 #endif
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index d1f5029..29e55b9 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -31,12 +31,14 @@
 	unsigned int val;
 	int tmp;
 
-	__asm__ __volatile__ ("cli %1;\n\t"
-			"NOP; NOP; SSYNC;\n\t"
-			"%0 = b [%2] (z);\n\t"
-			"sti %1;\n\t"
-			: "=d"(val), "=d"(tmp): "a"(addr)
-			);
+	__asm__ __volatile__ (
+		"cli %1;"
+		"NOP; NOP; SSYNC;"
+		"%0 = b [%2] (z);"
+		"sti %1;"
+		: "=d"(val), "=d"(tmp)
+		: "a"(addr)
+	);
 
 	return (unsigned char) val;
 }
@@ -46,12 +48,14 @@
 	unsigned int val;
 	int tmp;
 
-	__asm__ __volatile__ ("cli %1;\n\t"
-			"NOP; NOP; SSYNC;\n\t"
-			"%0 = w [%2] (z);\n\t"
-			"sti %1;\n\t"
-		      	: "=d"(val), "=d"(tmp): "a"(addr)
-			);
+	__asm__ __volatile__ (
+		"cli %1;"
+		"NOP; NOP; SSYNC;"
+		"%0 = w [%2] (z);"
+		"sti %1;"
+		: "=d"(val), "=d"(tmp)
+		: "a"(addr)
+	);
 
 	return (unsigned short) val;
 }
@@ -61,20 +65,23 @@
 	unsigned int val;
 	int tmp;
 
-	__asm__ __volatile__ ("cli %1;\n\t"
-			"NOP; NOP; SSYNC;\n\t"
-			"%0 = [%2];\n\t"
-			"sti %1;\n\t"
-		      	: "=d"(val), "=d"(tmp): "a"(addr)
-			);
+	__asm__ __volatile__ (
+		"cli %1;"
+		"NOP; NOP; SSYNC;"
+		"%0 = [%2];"
+		"sti %1;"
+		: "=d"(val), "=d"(tmp)
+		: "a"(addr)
+	);
+
 	return val;
 }
 
 #endif /*  __ASSEMBLY__ */
 
-#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
 
 #define __raw_readb readb
 #define __raw_readw readw
@@ -82,9 +89,9 @@
 #define __raw_writeb writeb
 #define __raw_writew writew
 #define __raw_writel writel
-#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+#define memset_io(a, b, c)	memset((void *)(a), (b), (c))
+#define memcpy_fromio(a, b, c)	memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c)	memcpy((void *)(a), (b), (c))
 
 /* Convert "I/O port addresses" to actual addresses.  i.e. ugly casts. */
 #define __io(port) ((void *)(unsigned long)(port))
@@ -92,30 +99,30 @@
 #define inb(port)    readb(__io(port))
 #define inw(port)    readw(__io(port))
 #define inl(port)    readl(__io(port))
-#define outb(x,port) writeb(x,__io(port))
-#define outw(x,port) writew(x,__io(port))
-#define outl(x,port) writel(x,__io(port))
+#define outb(x, port) writeb(x, __io(port))
+#define outw(x, port) writew(x, __io(port))
+#define outl(x, port) writel(x, __io(port))
 
 #define inb_p(port)    inb(__io(port))
 #define inw_p(port)    inw(__io(port))
 #define inl_p(port)    inl(__io(port))
-#define outb_p(x,port) outb(x,__io(port))
-#define outw_p(x,port) outw(x,__io(port))
-#define outl_p(x,port) outl(x,__io(port))
+#define outb_p(x, port) outb(x, __io(port))
+#define outw_p(x, port) outw(x, __io(port))
+#define outl_p(x, port) outl(x, __io(port))
 
-#define ioread8_rep(a,d,c)	readsb(a,d,c)
-#define ioread16_rep(a,d,c)	readsw(a,d,c)
-#define ioread32_rep(a,d,c)	readsl(a,d,c)
-#define iowrite8_rep(a,s,c)	writesb(a,s,c)
-#define iowrite16_rep(a,s,c)	writesw(a,s,c)
-#define iowrite32_rep(a,s,c)	writesl(a,s,c)
+#define ioread8_rep(a, d, c)	readsb(a, d, c)
+#define ioread16_rep(a, d, c)	readsw(a, d, c)
+#define ioread32_rep(a, d, c)	readsl(a, d, c)
+#define iowrite8_rep(a, s, c)	writesb(a, s, c)
+#define iowrite16_rep(a, s, c)	writesw(a, s, c)
+#define iowrite32_rep(a, s, c)	writesl(a, s, c)
 
-#define ioread8(X)			readb(X)
-#define ioread16(X)			readw(X)
-#define ioread32(X)			readl(X)
-#define iowrite8(val,X)			writeb(val,X)
-#define iowrite16(val,X)		writew(val,X)
-#define iowrite32(val,X)		writel(val,X)
+#define ioread8(x)			readb(x)
+#define ioread16(x)			readw(x)
+#define ioread32(x)			readl(x)
+#define iowrite8(val, x)		writeb(val, x)
+#define iowrite16(val, x)		writew(val, x)
+#define iowrite32(val, x)		writel(val, x)
 
 #define mmiowb() wmb()
 
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 4617ba6..d3b40449 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.11-00"
+#define IPIPE_ARCH_STRING     "1.12-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    11
+#define IPIPE_MINOR_NUMBER    12
 #define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
@@ -124,16 +124,6 @@
 	return 1;
 }
 
-static inline void __ipipe_lock_root(void)
-{
-	set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
-}
-
-static inline void __ipipe_unlock_root(void)
-{
-	clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
-}
-
 void __ipipe_enable_pipeline(void);
 
 #define __ipipe_hook_critical_ipi(ipd) do { } while (0)
diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h
index 490098f..0040920 100644
--- a/arch/blackfin/include/asm/ipipe_base.h
+++ b/arch/blackfin/include/asm/ipipe_base.h
@@ -51,23 +51,15 @@
 
 extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
 
-#define __ipipe_stall_root()						\
-	do {								\
-		volatile unsigned long *p = &__ipipe_root_status;	\
-		set_bit(0, p);						\
-	} while (0)
+void __ipipe_stall_root(void);
 
-#define __ipipe_test_and_stall_root()					\
-	({								\
-		volatile unsigned long *p = &__ipipe_root_status;	\
-		test_and_set_bit(0, p);					\
-	})
+unsigned long __ipipe_test_and_stall_root(void);
 
-#define __ipipe_test_root()					\
-	({							\
-		const unsigned long *p = &__ipipe_root_status;	\
-		test_bit(0, p);					\
-	})
+unsigned long __ipipe_test_root(void);
+
+void __ipipe_lock_root(void);
+
+void __ipipe_unlock_root(void);
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h
index 9b19a19..813a1af 100644
--- a/arch/blackfin/include/asm/irqflags.h
+++ b/arch/blackfin/include/asm/irqflags.h
@@ -33,6 +33,7 @@
 
 #ifdef CONFIG_IPIPE
 
+#include <linux/compiler.h>
 #include <linux/ipipe_base.h>
 #include <linux/ipipe_trace.h>
 
@@ -49,12 +50,12 @@
 		barrier();				\
 	} while (0)
 
-static inline void raw_local_irq_enable(void)
-{
-	barrier();
-	ipipe_check_context(ipipe_root_domain);
-	__ipipe_unstall_root();
-}
+#define raw_local_irq_enable()				\
+	do {						\
+		barrier();				\
+		ipipe_check_context(ipipe_root_domain);	\
+		__ipipe_unstall_root();			\
+	} while (0)
 
 #define raw_local_save_flags_ptr(x)					\
 	do {								\
diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h
index c8b256d..8651afe 100644
--- a/arch/blackfin/include/asm/kgdb.h
+++ b/arch/blackfin/include/asm/kgdb.h
@@ -10,9 +10,6 @@
 
 #include <linux/ptrace.h>
 
-/* gdb locks */
-#define KGDB_MAX_NO_CPUS 8
-
 /*
  * BUFMAX defines the maximum number of characters in inbound/outbound buffers.
  * At least NUMREGBYTES*2 are needed for register packets.
diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h
index 4179e32..7c8fe83 100644
--- a/arch/blackfin/include/asm/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -295,156 +295,3 @@
 #else
 #define PLL_BYPASS       0
 #endif
-
-/***************************************Currently Not Being Used *********************************/
-
-#if defined(CONFIG_FLASH_SPEED_BWAT) && \
-defined(CONFIG_FLASH_SPEED_BRAT) && \
-defined(CONFIG_FLASH_SPEED_BHT) && \
-defined(CONFIG_FLASH_SPEED_BST) && \
-defined(CONFIG_FLASH_SPEED_BTT)
-
-#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0  \
-	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
-	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
-#endif
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index 4a3be37..ae8ef4f 100644
--- a/arch/blackfin/include/asm/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -66,8 +66,8 @@
 
 #define activate_mm(prev, next) switch_mm(prev, next, NULL)
 
-static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
-			     struct task_struct *tsk)
+static inline void __switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
+			       struct task_struct *tsk)
 {
 #ifdef CONFIG_MPU
 	unsigned int cpu = smp_processor_id();
@@ -95,7 +95,24 @@
 #endif
 }
 
+#ifdef CONFIG_IPIPE
+#define lock_mm_switch(flags)	local_irq_save_hw_cond(flags)
+#define unlock_mm_switch(flags)	local_irq_restore_hw_cond(flags)
+#else
+#define lock_mm_switch(flags)	do { (void)(flags); } while (0)
+#define unlock_mm_switch(flags)	do { (void)(flags); } while (0)
+#endif /* CONFIG_IPIPE */
+
 #ifdef CONFIG_MPU
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	unsigned long flags;
+	lock_mm_switch(flags);
+	__switch_mm(prev, next, tsk);
+	unlock_mm_switch(flags);
+}
+
 static inline void protect_page(struct mm_struct *mm, unsigned long addr,
 				unsigned long flags)
 {
@@ -128,6 +145,12 @@
 		set_mask_dcplbs(mm->context.page_rwx_mask, cpu);
 	}
 }
+#else /* !CONFIG_MPU */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	__switch_mm(prev, next, tsk);
+}
 #endif
 
 static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
@@ -173,4 +196,10 @@
 #endif
 }
 
+#define ipipe_mm_switch_protect(flags)		\
+	local_irq_save_hw_cond(flags)
+
+#define ipipe_mm_switch_unprotect(flags)	\
+	local_irq_restore_hw_cond(flags)
+
 #endif
diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h
index 6127735..99cae2e 100644
--- a/arch/blackfin/include/asm/pci.h
+++ b/arch/blackfin/include/asm/pci.h
@@ -4,145 +4,19 @@
 #define _ASM_BFIN_PCI_H
 
 #include <asm/scatterlist.h>
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci.h>
 
-/*
- *
- * Written by Wout Klaren.
- */
-
-/* Added by Chang Junxiao */
 #define PCIBIOS_MIN_IO 0x00001000
 #define PCIBIOS_MIN_MEM 0x10000000
 
-#define PCI_DMA_BUS_IS_PHYS       (1)
-struct pci_ops;
-
-/*
- * Structure with hardware dependent information and functions of the
- * PCI bus.
- */
-struct pci_bus_info {
-
-	/*
-	 * Resources of the PCI bus.
-	 */
-	struct resource mem_space;
-	struct resource io_space;
-
-	/*
-	 * System dependent functions.
-	 */
-	struct pci_ops *bfin_pci_ops;
-	void (*fixup) (int pci_modify);
-	void (*conf_device) (unsigned char bus, unsigned char device_fn);
-};
-
-#define pcibios_assign_all_busses()	0
 static inline void pcibios_set_master(struct pci_dev *dev)
 {
-
 	/* No special bus mastering setup handling */
 }
 static inline void pcibios_penalize_isa_irq(int irq)
 {
-
 	/* We don't do dynamic PCI IRQ allocation */
 }
-static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr,
-					size_t size, int direction)
-{
-	if (direction == PCI_DMA_NONE)
-		BUG();
-
-	 /* return virt_to_bus(ptr); */
-	return (dma_addr_t) ptr;
-}
-
-/* Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
-static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
-				    size_t size, int direction)
-{
-	if (direction == PCI_DMA_NONE)
-		BUG();
-
-	/* Nothing to do */
-}
-
-/* Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-static inline int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-			     int nents, int direction)
-{
-	if (direction == PCI_DMA_NONE)
-		BUG();
-	return nents;
-}
-
-/* Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-static inline void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-				int nents, int direction)
-{
-	if (direction == PCI_DMA_NONE)
-		BUG();
-
-	/* Nothing to do */
-}
-
-/* Make physical memory consistent for a single
- * streaming mode DMA translation after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so.  At the
- * next point you give the PCI dma address back to the card, the
- * device again owns the buffer.
- */
-static inline void pci_dma_sync_single(struct pci_dev *hwdev,
-				       dma_addr_t dma_handle, size_t size,
-				       int direction)
-{
-	if (direction == PCI_DMA_NONE)
-		BUG();
-
-	/* Nothing to do */
-}
-
-/* Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as pci_dma_sync_single but for a scatter-gather list,
- * same rules and usage.
- */
-static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
-				   struct scatterlist *sg, int nelems,
-				   int direction)
-{
-	if (direction == PCI_DMA_NONE)
-		BUG();
-
-	/* Nothing to do */
-}
 
 #endif				/* _ASM_BFIN_PCI_H */
diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h
index 27290c9..b33a448 100644
--- a/arch/blackfin/include/asm/ptrace.h
+++ b/arch/blackfin/include/asm/ptrace.h
@@ -89,9 +89,9 @@
 #define PTRACE_GETREGS            12
 #define PTRACE_SETREGS            13	/* ptrace signal  */
 
-#define PTRACE_GETFDPIC           31
-#define PTRACE_GETFDPIC_EXEC      0
-#define PTRACE_GETFDPIC_INTERP    1
+#define PTRACE_GETFDPIC           31	/* get the ELF fdpic loadmap address */
+#define PTRACE_GETFDPIC_EXEC       0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP     1	/* [addr] request the interpreter loadmap */
 
 #define PS_S  (0x0002)
 
diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h
index 1f5381f..42f6c53 100644
--- a/arch/blackfin/include/asm/sections.h
+++ b/arch/blackfin/include/asm/sections.h
@@ -13,10 +13,18 @@
 extern unsigned long _ramstart, _ramend, _rambase;
 extern unsigned long memory_start, memory_end, physical_mem_end;
 
-extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
-	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
-	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
-	_ebss_l2[], _l2_lma_start[];
+/*
+ * The weak markings on the lengths might seem weird, but this is required
+ * in order to make gcc accept the fact that these may actually have a value
+ * of 0 (since they aren't actually addresses, but sizes of sections).
+ */
+extern char _stext_l1[], _etext_l1[], _text_l1_lma[], __weak _text_l1_len[];
+extern char _sdata_l1[], _edata_l1[], _sbss_l1[], _ebss_l1[],
+	_data_l1_lma[], __weak _data_l1_len[];
+extern char _sdata_b_l1[], _edata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
+	_data_b_l1_lma[], __weak _data_b_l1_len[];
+extern char _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[],
+	_sbss_l2[], _ebss_l2[], _l2_lma[], __weak _l2_len[];
 
 #include <asm/mem_map.h>
 
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index afb3a86..a40d936 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -103,11 +103,13 @@
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_FREEZE              6       /* is freezing for suspend */
 #define TIF_IRQ_SYNC            7       /* sync pipeline stage */
+#define TIF_NOTIFY_RESUME       8       /* callback before returning to user */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE             (1<<TIF_FREEZE)
diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h
index 609ad3c..dc0aa55 100644
--- a/arch/blackfin/include/asm/trace.h
+++ b/arch/blackfin/include/asm/trace.h
@@ -28,6 +28,8 @@
 
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 
+#define trace_buffer_init() bfin_write_TBUFCTL(BFIN_TRACE_INIT)
+
 #define trace_buffer_save(x) \
 	do { \
 		(x) = bfin_read_TBUFCTL(); \
diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index c03b853..1c0d190 100644
--- a/arch/blackfin/include/asm/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
@@ -17,9 +17,7 @@
 #include <linux/string.h>
 
 #include <asm/segment.h>
-#ifdef CONFIG_ACCESS_CHECK
-# include <asm/bfin-global.h>
-#endif
+#include <asm/sections.h>
 
 #define get_ds()        (KERNEL_DS)
 #define get_fs()        (current_thread_info()->addr_limit)
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index 779be02..22886cb 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -388,8 +388,9 @@
 #define __NR_pwritev		367
 #define __NR_rt_tgsigqueueinfo	368
 #define __NR_perf_event_open	369
+#define __NR_recvmmsg		370
 
-#define __NR_syscall		370
+#define __NR_syscall		371
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 3946aff..924c002 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -37,9 +37,8 @@
 	printk(KERN_INFO "Blackfin DMA Controller\n");
 
 	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
-		dma_ch[i].chan_status = DMA_CHANNEL_FREE;
+		atomic_set(&dma_ch[i].chan_status, 0);
 		dma_ch[i].regs = dma_io_base_addr[i];
-		mutex_init(&(dma_ch[i].dmalock));
 	}
 	/* Mark MEMDMA Channel 0 as requested since we're using it internally */
 	request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy");
@@ -60,7 +59,7 @@
 	int i;
 
 	for (i = 0; i < MAX_DMA_CHANNELS; ++i)
-		if (dma_ch[i].chan_status != DMA_CHANNEL_FREE)
+		if (dma_channel_active(i))
 			seq_printf(m, "%2d: %s\n", i, dma_ch[i].device_id);
 
 	return 0;
@@ -107,20 +106,11 @@
 	}
 #endif
 
-	mutex_lock(&(dma_ch[channel].dmalock));
-
-	if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED)
-	    || (dma_ch[channel].chan_status == DMA_CHANNEL_ENABLED)) {
-		mutex_unlock(&(dma_ch[channel].dmalock));
+	if (atomic_cmpxchg(&dma_ch[channel].chan_status, 0, 1)) {
 		pr_debug("DMA CHANNEL IN USE  \n");
 		return -EBUSY;
-	} else {
-		dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED;
-		pr_debug("DMA CHANNEL IS ALLOCATED  \n");
 	}
 
-	mutex_unlock(&(dma_ch[channel].dmalock));
-
 #ifdef CONFIG_BF54x
 	if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) {
 		unsigned int per_map;
@@ -148,21 +138,20 @@
 
 int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data)
 {
-	BUG_ON(channel >= MAX_DMA_CHANNELS ||
-			dma_ch[channel].chan_status == DMA_CHANNEL_FREE);
+	int ret;
+	unsigned int irq;
 
-	if (callback != NULL) {
-		int ret;
-		unsigned int irq = channel2irq(channel);
+	BUG_ON(channel >= MAX_DMA_CHANNELS || !callback ||
+			!atomic_read(&dma_ch[channel].chan_status));
 
-		ret = request_irq(irq, callback, IRQF_DISABLED,
-			dma_ch[channel].device_id, data);
-		if (ret)
-			return ret;
+	irq = channel2irq(channel);
+	ret = request_irq(irq, callback, 0, dma_ch[channel].device_id, data);
+	if (ret)
+		return ret;
 
-		dma_ch[channel].irq = irq;
-		dma_ch[channel].data = data;
-	}
+	dma_ch[channel].irq = irq;
+	dma_ch[channel].data = data;
+
 	return 0;
 }
 EXPORT_SYMBOL(set_dma_callback);
@@ -184,7 +173,7 @@
 {
 	pr_debug("freedma() : BEGIN \n");
 	BUG_ON(channel >= MAX_DMA_CHANNELS ||
-			dma_ch[channel].chan_status == DMA_CHANNEL_FREE);
+			!atomic_read(&dma_ch[channel].chan_status));
 
 	/* Halt the DMA */
 	disable_dma(channel);
@@ -194,9 +183,7 @@
 		free_irq(dma_ch[channel].irq, dma_ch[channel].data);
 
 	/* Clear the DMA Variable in the Channel */
-	mutex_lock(&(dma_ch[channel].dmalock));
-	dma_ch[channel].chan_status = DMA_CHANNEL_FREE;
-	mutex_unlock(&(dma_ch[channel].dmalock));
+	atomic_set(&dma_ch[channel].chan_status, 0);
 
 	pr_debug("freedma() : END \n");
 }
@@ -210,13 +197,14 @@
 {
 	int i;
 
-	for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) {
-		if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) {
+	for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
+		if (dma_ch[i].regs->cfg & DMAEN) {
 			printk(KERN_ERR "DMA Channel %d failed to suspend\n", i);
 			return -EBUSY;
 		}
 
-		dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
+		if (i < MAX_DMA_SUSPEND_CHANNELS)
+			dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
 	}
 
 	return 0;
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 22705ee..a174596 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -100,6 +100,12 @@
 };
 # endif
 
+#elif defined(BF538_FAMILY)
+static unsigned short * const port_fer[] = {
+	(unsigned short *) PORTCIO_FER,
+	(unsigned short *) PORTDIO_FER,
+	(unsigned short *) PORTEIO_FER,
+};
 #endif
 
 static unsigned short reserved_gpio_map[GPIO_BANK_NUM];
@@ -163,6 +169,27 @@
 
 static void port_setup(unsigned gpio, unsigned short usage)
 {
+#if defined(BF538_FAMILY)
+	/*
+	 * BF538/9 Port C,D and E are special.
+	 * Inverted PORT_FER polarity on CDE and no PORF_FER on F
+	 * Regular PORT F GPIOs are handled here, CDE are exclusively
+	 * managed by GPIOLIB
+	 */
+
+	if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES)
+		return;
+
+	gpio -= MAX_BLACKFIN_GPIOS;
+
+	if (usage == GPIO_USAGE)
+		*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+	else
+		*port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+	SSYNC();
+	return;
+#endif
+
 	if (check_gpio(gpio))
 		return;
 
@@ -762,6 +789,8 @@
 	if (!(per & P_DEFINED))
 		return -ENODEV;
 
+	BUG_ON(ident >= MAX_RESOURCES);
+
 	local_irq_save_hw(flags);
 
 	/* If a pin can be muxed as either GPIO or peripheral, make
@@ -979,6 +1008,76 @@
 }
 EXPORT_SYMBOL(bfin_gpio_free);
 
+#ifdef BFIN_SPECIAL_GPIO_BANKS
+static unsigned short reserved_special_gpio_map[gpio_bank(MAX_RESOURCES)];
+
+int bfin_special_gpio_request(unsigned gpio, const char *label)
+{
+	unsigned long flags;
+
+	local_irq_save_hw(flags);
+
+	/*
+	 * Allow that the identical GPIO can
+	 * be requested from the same driver twice
+	 * Do nothing and return -
+	 */
+
+	if (cmp_label(gpio, label) == 0) {
+		local_irq_restore_hw(flags);
+		return 0;
+	}
+
+	if (unlikely(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+		local_irq_restore_hw(flags);
+		printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
+		       gpio, get_label(gpio));
+
+		return -EBUSY;
+	}
+	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+		local_irq_restore_hw(flags);
+		printk(KERN_ERR
+		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
+		       gpio, get_label(gpio));
+
+		return -EBUSY;
+	}
+
+	reserved_special_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+	reserved_peri_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+
+	set_label(gpio, label);
+	local_irq_restore_hw(flags);
+	port_setup(gpio, GPIO_USAGE);
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_special_gpio_request);
+
+void bfin_special_gpio_free(unsigned gpio)
+{
+	unsigned long flags;
+
+	might_sleep();
+
+	local_irq_save_hw(flags);
+
+	if (unlikely(!(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+		gpio_error(gpio);
+		local_irq_restore_hw(flags);
+		return;
+	}
+
+	reserved_special_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+	reserved_peri_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+	set_label(gpio, "free");
+	local_irq_restore_hw(flags);
+}
+EXPORT_SYMBOL(bfin_special_gpio_free);
+#endif
+
+
 int bfin_gpio_irq_request(unsigned gpio, const char *label)
 {
 	unsigned long flags;
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index b52c1f8c4..8d42b9e 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -92,6 +92,6 @@
 		icplb_tbl[cpu][i_i++].data = 0;
 }
 
-void generate_cplb_tables_all(void)
+void __init generate_cplb_tables_all(void)
 {
 }
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 69e0e53..930c01c 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -113,11 +113,11 @@
 		addr = L2_START;
 		d_data = L2_DMEMORY;
 	} else if (addr >= physical_mem_end) {
-		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE
-		    && (status & FAULT_USERSUPV)) {
-			addr &= ~0x3fffff;
+		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
+			addr &= ~(4 * 1024 * 1024 - 1);
 			d_data &= ~PAGE_SIZE_4KB;
 			d_data |= PAGE_SIZE_4MB;
+			d_data |= CPLB_USER_RD | CPLB_USER_WR;
 		} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
 		    && (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) {
 			addr &= ~(1 * 1024 * 1024 - 1);
@@ -203,7 +203,12 @@
 		addr = L2_START;
 		i_data = L2_IMEMORY;
 	} else if (addr >= physical_mem_end) {
-		if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
+		if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
+			addr &= ~(4 * 1024 * 1024 - 1);
+			i_data &= ~PAGE_SIZE_4KB;
+			i_data |= PAGE_SIZE_4MB;
+			i_data |= CPLB_USER_RD;
+		} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
 		    && (status & FAULT_USERSUPV)) {
 			addr &= ~(1 * 1024 * 1024 - 1);
 			i_data &= ~PAGE_SIZE_4KB;
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index fd9a2f3..282a791 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -89,15 +89,25 @@
 
 void __init generate_cplb_tables_all(void)
 {
+	unsigned long uncached_end;
 	int i_d, i_i;
 
 	i_d = 0;
 	/* Normal RAM, including MTD FS.  */
 #ifdef CONFIG_MTD_UCLINUX
-	dcplb_bounds[i_d].eaddr = memory_mtd_start + mtd_size;
+	uncached_end = memory_mtd_start + mtd_size;
 #else
-	dcplb_bounds[i_d].eaddr = memory_end;
+	uncached_end = memory_end;
 #endif
+	/*
+	 * if DMA uncached is less than 1MB, mark the 1MB chunk as uncached
+	 * so that we don't have to use 4kB pages and cause CPLB thrashing
+	 */
+	if ((DMA_UNCACHED_REGION >= 1 * 1024 * 1024) || !DMA_UNCACHED_REGION ||
+	    ((_ramend - uncached_end) >= 1 * 1024 * 1024))
+		dcplb_bounds[i_d].eaddr = uncached_end;
+	else
+		dcplb_bounds[i_d].eaddr = uncached_end & ~(1 * 1024 * 1024);
 	dcplb_bounds[i_d++].data = SDRAM_DGENERIC;
 	/* DMA uncached region.  */
 	if (DMA_UNCACHED_REGION) {
@@ -135,18 +145,15 @@
 
 	i_i = 0;
 	/* Normal RAM, including MTD FS.  */
-#ifdef CONFIG_MTD_UCLINUX
-	icplb_bounds[i_i].eaddr = memory_mtd_start + mtd_size;
-#else
-	icplb_bounds[i_i].eaddr = memory_end;
-#endif
+	icplb_bounds[i_i].eaddr = uncached_end;
 	icplb_bounds[i_i++].data = SDRAM_IGENERIC;
-	/* DMA uncached region.  */
-	if (DMA_UNCACHED_REGION) {
-		icplb_bounds[i_i].eaddr = _ramend;
-		icplb_bounds[i_i++].data = 0;
-	}
 	if (_ramend != physical_mem_end) {
+		/* DMA uncached region.  */
+		if (DMA_UNCACHED_REGION) {
+			/* Normally this hole is caught by the async below.  */
+			icplb_bounds[i_i].eaddr = _ramend;
+			icplb_bounds[i_i++].data = 0;
+		}
 		/* Reserved memory.  */
 		icplb_bounds[i_i].eaddr = physical_mem_end;
 		icplb_bounds[i_i++].data = (reserved_mem_icache_on ?
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index e74e74d..e937f32 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -7,30 +7,25 @@
  */
 
 #include <linux/types.h>
-#include <linux/mm.h>
+#include <linux/gfp.h>
 #include <linux/string.h>
-#include <linux/bootmem.h>
 #include <linux/spinlock.h>
-#include <linux/device.h>
 #include <linux/dma-mapping.h>
-#include <linux/io.h>
 #include <linux/scatterlist.h>
-#include <asm/cacheflush.h>
-#include <asm/bfin-global.h>
 
 static spinlock_t dma_page_lock;
-static unsigned int *dma_page;
+static unsigned long *dma_page;
 static unsigned int dma_pages;
 static unsigned long dma_base;
 static unsigned long dma_size;
 static unsigned int dma_initialized;
 
-void dma_alloc_init(unsigned long start, unsigned long end)
+static void dma_alloc_init(unsigned long start, unsigned long end)
 {
 	spin_lock_init(&dma_page_lock);
 	dma_initialized = 0;
 
-	dma_page = (unsigned int *)__get_free_page(GFP_KERNEL);
+	dma_page = (unsigned long *)__get_free_page(GFP_KERNEL);
 	memset(dma_page, 0, PAGE_SIZE);
 	dma_base = PAGE_ALIGN(start);
 	dma_size = PAGE_ALIGN(end) - PAGE_ALIGN(start);
@@ -58,10 +53,11 @@
 	spin_lock_irqsave(&dma_page_lock, flags);
 
 	for (i = 0; i < dma_pages;) {
-		if (dma_page[i++] == 0) {
+		if (test_bit(i++, dma_page) == 0) {
 			if (++count == pages) {
 				while (count--)
-					dma_page[--i] = 1;
+					__set_bit(--i, dma_page);
+
 				ret = dma_base + (i << PAGE_SHIFT);
 				break;
 			}
@@ -84,14 +80,14 @@
 	}
 
 	spin_lock_irqsave(&dma_page_lock, flags);
-	for (i = page; i < page + pages; i++) {
-		dma_page[i] = 0;
-	}
+	for (i = page; i < page + pages; i++)
+		__clear_bit(i, dma_page);
+
 	spin_unlock_irqrestore(&dma_page_lock, flags);
 }
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t * dma_handle, gfp_t gfp)
+			 dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 
@@ -115,21 +111,14 @@
 EXPORT_SYMBOL(dma_free_coherent);
 
 /*
- * Dummy functions defined for some existing drivers
+ * Streaming DMA mappings
  */
-
-dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-	       enum dma_data_direction direction)
+void __dma_sync(dma_addr_t addr, size_t size,
+		enum dma_data_direction dir)
 {
-	BUG_ON(direction == DMA_NONE);
-
-	invalidate_dcache_range((unsigned long)ptr,
-			(unsigned long)ptr + size);
-
-	return (dma_addr_t) ptr;
+	_dma_sync(addr, size, dir);
 }
-EXPORT_SYMBOL(dma_map_single);
+EXPORT_SYMBOL(__dma_sync);
 
 int
 dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
@@ -137,30 +126,23 @@
 {
 	int i;
 
-	BUG_ON(direction == DMA_NONE);
-
 	for (i = 0; i < nents; i++, sg++) {
 		sg->dma_address = (dma_addr_t) sg_virt(sg);
-
-		invalidate_dcache_range(sg_dma_address(sg),
-					sg_dma_address(sg) +
-					sg_dma_len(sg));
+		__dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction);
 	}
 
 	return nents;
 }
 EXPORT_SYMBOL(dma_map_sg);
 
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		enum dma_data_direction direction)
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+			    int nelems, enum dma_data_direction direction)
 {
-	BUG_ON(direction == DMA_NONE);
-}
-EXPORT_SYMBOL(dma_unmap_single);
+	int i;
 
-void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-		int nhwentries, enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
+	for (i = 0; i < nelems; i++, sg++) {
+		sg->dma_address = (dma_addr_t) sg_virt(sg);
+		__dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction);
+	}
 }
-EXPORT_SYMBOL(dma_unmap_sg);
+EXPORT_SYMBOL(dma_sync_sg_for_device);
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index 7281a91..cdbe075 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -137,7 +137,7 @@
 #endif
 };
 
-void set_gptimer_pwidth(int timer_id, uint32_t value)
+void set_gptimer_pwidth(unsigned int timer_id, uint32_t value)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	timer_regs[timer_id]->width = value;
@@ -145,14 +145,14 @@
 }
 EXPORT_SYMBOL(set_gptimer_pwidth);
 
-uint32_t get_gptimer_pwidth(int timer_id)
+uint32_t get_gptimer_pwidth(unsigned int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	return timer_regs[timer_id]->width;
 }
 EXPORT_SYMBOL(get_gptimer_pwidth);
 
-void set_gptimer_period(int timer_id, uint32_t period)
+void set_gptimer_period(unsigned int timer_id, uint32_t period)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	timer_regs[timer_id]->period = period;
@@ -160,28 +160,28 @@
 }
 EXPORT_SYMBOL(set_gptimer_period);
 
-uint32_t get_gptimer_period(int timer_id)
+uint32_t get_gptimer_period(unsigned int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	return timer_regs[timer_id]->period;
 }
 EXPORT_SYMBOL(get_gptimer_period);
 
-uint32_t get_gptimer_count(int timer_id)
+uint32_t get_gptimer_count(unsigned int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	return timer_regs[timer_id]->counter;
 }
 EXPORT_SYMBOL(get_gptimer_count);
 
-uint32_t get_gptimer_status(int group)
+uint32_t get_gptimer_status(unsigned int group)
 {
 	tassert(group < BFIN_TIMER_NUM_GROUP);
 	return group_regs[group]->status;
 }
 EXPORT_SYMBOL(get_gptimer_status);
 
-void set_gptimer_status(int group, uint32_t value)
+void set_gptimer_status(unsigned int group, uint32_t value)
 {
 	tassert(group < BFIN_TIMER_NUM_GROUP);
 	group_regs[group]->status = value;
@@ -189,42 +189,42 @@
 }
 EXPORT_SYMBOL(set_gptimer_status);
 
-int get_gptimer_intr(int timer_id)
+int get_gptimer_intr(unsigned int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]);
 }
 EXPORT_SYMBOL(get_gptimer_intr);
 
-void clear_gptimer_intr(int timer_id)
+void clear_gptimer_intr(unsigned int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	group_regs[BFIN_TIMER_OCTET(timer_id)]->status = timil_mask[timer_id];
 }
 EXPORT_SYMBOL(clear_gptimer_intr);
 
-int get_gptimer_over(int timer_id)
+int get_gptimer_over(unsigned int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]);
 }
 EXPORT_SYMBOL(get_gptimer_over);
 
-void clear_gptimer_over(int timer_id)
+void clear_gptimer_over(unsigned int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	group_regs[BFIN_TIMER_OCTET(timer_id)]->status = tovf_mask[timer_id];
 }
 EXPORT_SYMBOL(clear_gptimer_over);
 
-int get_gptimer_run(int timer_id)
+int get_gptimer_run(unsigned int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & trun_mask[timer_id]);
 }
 EXPORT_SYMBOL(get_gptimer_run);
 
-void set_gptimer_config(int timer_id, uint16_t config)
+void set_gptimer_config(unsigned int timer_id, uint16_t config)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	timer_regs[timer_id]->config = config;
@@ -232,7 +232,7 @@
 }
 EXPORT_SYMBOL(set_gptimer_config);
 
-uint16_t get_gptimer_config(int timer_id)
+uint16_t get_gptimer_config(unsigned int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	return timer_regs[timer_id]->config;
@@ -280,7 +280,7 @@
 }
 EXPORT_SYMBOL(disable_gptimers_sync);
 
-void set_gptimer_pulse_hi(int timer_id)
+void set_gptimer_pulse_hi(unsigned int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	timer_regs[timer_id]->config |= TIMER_PULSE_HI;
@@ -288,7 +288,7 @@
 }
 EXPORT_SYMBOL(set_gptimer_pulse_hi);
 
-void clear_gptimer_pulse_hi(int timer_id)
+void clear_gptimer_pulse_hi(unsigned int timer_id)
 {
 	tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
 	timer_regs[timer_id]->config &= ~TIMER_PULSE_HI;
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index 5d73823..a77307a 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -335,3 +335,70 @@
 	__clear_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
 	bfin_sti(bfin_irq_flags);
 }
+
+/*
+ * We could use standard atomic bitops in the following root status
+ * manipulation routines, but let's prepare for SMP support in the
+ * same move, preventing CPU migration as required.
+ */
+void __ipipe_stall_root(void)
+{
+	unsigned long *p, flags;
+
+	local_irq_save_hw(flags);
+	p = &__ipipe_root_status;
+	__set_bit(IPIPE_STALL_FLAG, p);
+	local_irq_restore_hw(flags);
+}
+EXPORT_SYMBOL(__ipipe_stall_root);
+
+unsigned long __ipipe_test_and_stall_root(void)
+{
+	unsigned long *p, flags;
+	int x;
+
+	local_irq_save_hw(flags);
+	p = &__ipipe_root_status;
+	x = __test_and_set_bit(IPIPE_STALL_FLAG, p);
+	local_irq_restore_hw(flags);
+
+	return x;
+}
+EXPORT_SYMBOL(__ipipe_test_and_stall_root);
+
+unsigned long __ipipe_test_root(void)
+{
+	const unsigned long *p;
+	unsigned long flags;
+	int x;
+
+	local_irq_save_hw_smp(flags);
+	p = &__ipipe_root_status;
+	x = test_bit(IPIPE_STALL_FLAG, p);
+	local_irq_restore_hw_smp(flags);
+
+	return x;
+}
+EXPORT_SYMBOL(__ipipe_test_root);
+
+void __ipipe_lock_root(void)
+{
+	unsigned long *p, flags;
+
+	local_irq_save_hw(flags);
+	p = &__ipipe_root_status;
+	__set_bit(IPIPE_SYNCDEFER_FLAG, p);
+	local_irq_restore_hw(flags);
+}
+EXPORT_SYMBOL(__ipipe_lock_root);
+
+void __ipipe_unlock_root(void)
+{
+	unsigned long *p, flags;
+
+	local_irq_save_hw(flags);
+	p = &__ipipe_root_status;
+	__clear_bit(IPIPE_SYNCDEFER_FLAG, p);
+	local_irq_restore_hw(flags);
+}
+EXPORT_SYMBOL(__ipipe_unlock_root);
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index cce79d0..f1036b6 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -24,16 +24,6 @@
 #include <asm/blackfin.h>
 #include <asm/dma.h>
 
-/* Put the error code here just in case the user cares.  */
-int gdb_bfin_errcode;
-/* Likewise, the vector number here (since GDB only gets the signal
-   number through the usual means, and that's not very specific).  */
-int gdb_bfin_vector = -1;
-
-#if KGDB_MAX_NO_CPUS != 8
-#error change the definition of slavecpulocks
-#endif
-
 void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 {
 	gdb_regs[BFIN_R0] = regs->r0;
@@ -369,13 +359,6 @@
 }
 #endif
 
-void kgdb_post_primary_code(struct pt_regs *regs, int eVector, int err_code)
-{
-	/* Master processor is completely in the debugger */
-	gdb_bfin_vector = eVector;
-	gdb_bfin_errcode = err_code;
-}
-
 int kgdb_arch_handle_exception(int vector, int signo,
 			       int err_code, char *remcom_in_buffer,
 			       char *remcom_out_buffer,
diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c
index 59fc42d..9a4b075 100644
--- a/arch/blackfin/kernel/kgdb_test.c
+++ b/arch/blackfin/kernel/kgdb_test.c
@@ -17,8 +17,9 @@
 
 #include <asm/blackfin.h>
 
+/* Symbols are here for kgdb test to poke directly */
 static char cmdline[256];
-static unsigned long len;
+static size_t len;
 
 #ifndef CONFIG_SMP
 static int num1 __attribute__((l1_data));
@@ -27,11 +28,10 @@
 
 void kgdb_l1_test(void)
 {
-	printk(KERN_ALERT "L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
-	printk(KERN_ALERT "L1 : code function addr = 0x%p\n", kgdb_l1_test);
-	num1 = num1 + 10 ;
-	printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
-	return ;
+	pr_alert("L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
+	pr_alert("L1 : code function addr = 0x%p\n", kgdb_l1_test);
+	num1 = num1 + 10;
+	pr_alert("L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
 }
 #endif
 
@@ -42,11 +42,10 @@
 
 void kgdb_l2_test(void)
 {
-	printk(KERN_ALERT "L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
-	printk(KERN_ALERT "L2 : code function addr = 0x%p\n", kgdb_l2_test);
-	num2 = num2 + 20 ;
-	printk(KERN_ALERT "L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
-	return ;
+	pr_alert("L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
+	pr_alert("L2 : code function addr = 0x%p\n", kgdb_l2_test);
+	num2 = num2 + 20;
+	pr_alert("L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
 }
 
 #endif
@@ -54,12 +53,14 @@
 
 int kgdb_test(char *name, int len, int count, int z)
 {
-	printk(KERN_ALERT "kgdb name(%d): %s, %d, %d\n", len, name, count, z);
+	pr_alert("kgdb name(%d): %s, %d, %d\n", len, name, count, z);
 	count = z;
 	return count;
 }
 
-static int test_proc_output(char *buf)
+static ssize_t
+kgdb_test_proc_read(struct file *file, char __user *buf,
+                    size_t count, loff_t *ppos)
 {
 	kgdb_test("hello world!", 12, 0x55, 0x10);
 #ifndef CONFIG_SMP
@@ -72,49 +73,31 @@
 	return 0;
 }
 
-static int test_read_proc(char *page, char **start, off_t off,
-				 int count, int *eof, void *data)
+static ssize_t
+kgdb_test_proc_write(struct file *file, const char __user *buffer,
+                     size_t count, loff_t *pos)
 {
-	int len;
-
-	len = test_proc_output(page);
-	if (len <= off+count)
-		*eof = 1;
-	*start = page + off;
-	len -= off;
-	if (len > count)
-		len = count;
-	if (len < 0)
-		len = 0;
-	return len;
-}
-
-static int test_write_proc(struct file *file, const char *buffer,
-				 unsigned long count, void *data)
-{
-	if (count >= 256)
-		len = 255;
-	else
-		len = count;
-
+	len = min_t(size_t, 255, count);
 	memcpy(cmdline, buffer, count);
 	cmdline[len] = 0;
 
 	return len;
 }
 
+static const struct file_operations kgdb_test_proc_fops = {
+	.owner = THIS_MODULE,
+	.read  = kgdb_test_proc_read,
+	.write = kgdb_test_proc_write,
+};
+
 static int __init kgdbtest_init(void)
 {
 	struct proc_dir_entry *entry;
 
-	entry = create_proc_entry("kgdbtest", 0, NULL);
+	entry = proc_create("kgdbtest", 0, NULL, &kgdb_test_proc_fops);
 	if (entry == NULL)
 		return -ENOMEM;
 
-	entry->read_proc = test_read_proc;
-	entry->write_proc = test_write_proc;
-	entry->data = NULL;
-
 	return 0;
 }
 
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 4587642..b56b0e4 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -258,9 +258,12 @@
 	int __user *up0 = (int __user *)regs->p0;
 
 	switch (regs->pc) {
+	default:
+		/* not in middle of an atomic step, so resume like normal */
+		return;
+
 	case ATOMIC_XCHG32 + 2:
 		put_user(regs->r1, up0);
-		regs->pc = ATOMIC_XCHG32 + 4;
 		break;
 
 	case ATOMIC_CAS32 + 2:
@@ -268,7 +271,6 @@
 		if (regs->r0 == regs->r1)
 	case ATOMIC_CAS32 + 6:
 			put_user(regs->r2, up0);
-		regs->pc = ATOMIC_CAS32 + 8;
 		break;
 
 	case ATOMIC_ADD32 + 2:
@@ -276,7 +278,6 @@
 		/* fall through */
 	case ATOMIC_ADD32 + 4:
 		put_user(regs->r0, up0);
-		regs->pc = ATOMIC_ADD32 + 6;
 		break;
 
 	case ATOMIC_SUB32 + 2:
@@ -284,7 +285,6 @@
 		/* fall through */
 	case ATOMIC_SUB32 + 4:
 		put_user(regs->r0, up0);
-		regs->pc = ATOMIC_SUB32 + 6;
 		break;
 
 	case ATOMIC_IOR32 + 2:
@@ -292,7 +292,6 @@
 		/* fall through */
 	case ATOMIC_IOR32 + 4:
 		put_user(regs->r0, up0);
-		regs->pc = ATOMIC_IOR32 + 6;
 		break;
 
 	case ATOMIC_AND32 + 2:
@@ -300,7 +299,6 @@
 		/* fall through */
 	case ATOMIC_AND32 + 4:
 		put_user(regs->r0, up0);
-		regs->pc = ATOMIC_AND32 + 6;
 		break;
 
 	case ATOMIC_XOR32 + 2:
@@ -308,9 +306,15 @@
 		/* fall through */
 	case ATOMIC_XOR32 + 4:
 		put_user(regs->r0, up0);
-		regs->pc = ATOMIC_XOR32 + 6;
 		break;
 	}
+
+	/*
+	 * We've finished the atomic section, and the only thing left for
+	 * userspace is to do a RTS, so we might as well handle that too
+	 * since we need to update the PC anyways.
+	 */
+	regs->pc = regs->rets;
 }
 
 static inline
@@ -332,12 +336,58 @@
 {
 	return in_mem_const_off(addr, size, 0, const_addr, const_size);
 }
-#define IN_ASYNC(bnum, bctlnum) \
+#define ASYNC_ENABLED(bnum, bctlnum) \
 ({ \
-	(bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? -EFAULT : \
-	bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? -EFAULT : \
-	BFIN_MEM_ACCESS_CORE; \
+	(bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? 0 : \
+	bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? 0 : \
+	1; \
 })
+/*
+ * We can't read EBIU banks that aren't enabled or we end up hanging
+ * on the access to the async space.  Make sure we validate accesses
+ * that cross async banks too.
+ *	0 - found, but unusable
+ *	1 - found & usable
+ *	2 - not found
+ */
+static
+int in_async(unsigned long addr, unsigned long size)
+{
+	if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE) {
+		if (!ASYNC_ENABLED(0, 0))
+			return 0;
+		if (addr + size <= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)
+			return 1;
+		size -= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE - addr;
+		addr = ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE;
+	}
+	if (addr >= ASYNC_BANK1_BASE && addr < ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE) {
+		if (!ASYNC_ENABLED(1, 0))
+			return 0;
+		if (addr + size <= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)
+			return 1;
+		size -= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE - addr;
+		addr = ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE;
+	}
+	if (addr >= ASYNC_BANK2_BASE && addr < ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE) {
+		if (!ASYNC_ENABLED(2, 1))
+			return 0;
+		if (addr + size <= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE)
+			return 1;
+		size -= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE - addr;
+		addr = ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE;
+	}
+	if (addr >= ASYNC_BANK3_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
+		if (ASYNC_ENABLED(3, 1))
+			return 0;
+		if (addr + size <= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE)
+			return 1;
+		return 0;
+	}
+
+	/* not within async bounds */
+	return 2;
+}
 
 int bfin_mem_access_type(unsigned long addr, unsigned long size)
 {
@@ -374,17 +424,11 @@
 	if (addr >= SYSMMR_BASE)
 		return BFIN_MEM_ACCESS_CORE_ONLY;
 
-	/* We can't read EBIU banks that aren't enabled or we end up hanging
-	 * on the access to the async space.
-	 */
-	if (in_mem_const(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK0_SIZE))
-		return IN_ASYNC(0, 0);
-	if (in_mem_const(addr, size, ASYNC_BANK1_BASE, ASYNC_BANK1_SIZE))
-		return IN_ASYNC(1, 0);
-	if (in_mem_const(addr, size, ASYNC_BANK2_BASE, ASYNC_BANK2_SIZE))
-		return IN_ASYNC(2, 1);
-	if (in_mem_const(addr, size, ASYNC_BANK3_BASE, ASYNC_BANK3_SIZE))
-		return IN_ASYNC(3, 1);
+	switch (in_async(addr, size)) {
+	case 0: return -EFAULT;
+	case 1: return BFIN_MEM_ACCESS_CORE;
+	case 2: /* fall through */;
+	}
 
 	if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
 		return BFIN_MEM_ACCESS_CORE;
@@ -401,6 +445,8 @@
 /* Return 1 if access to memory range is OK, 0 otherwise */
 int _access_ok(unsigned long addr, unsigned long size)
 {
+	int aret;
+
 	if (size == 0)
 		return 1;
 	/* Check that things do not wrap around */
@@ -450,6 +496,11 @@
 	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
 		return 1;
 #endif
+
+	aret = in_async(addr, size);
+	if (aret < 2)
+		return aret;
+
 	if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
 		return 1;
 
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 56b0ba1..65567dc 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -316,19 +316,6 @@
 			case BFIN_MEM_ACCESS_CORE_ONLY:
 				copied = access_process_vm(child, addr, &data,
 				                           to_copy, 1);
-				if (copied)
-					break;
-
-				/* hrm, why didn't that work ... maybe no mapping */
-				if (addr >= FIXED_CODE_START &&
-				    addr + to_copy <= FIXED_CODE_END) {
-					copy_to_user_page(0, 0, 0, paddr, &data, to_copy);
-					copied = to_copy;
-				} else if (addr >= BOOT_ROM_START) {
-					memcpy(paddr, &data, to_copy);
-					copied = to_copy;
-				}
-
 				break;
 			case BFIN_MEM_ACCESS_DMA:
 				if (safe_dma_memcpy(paddr, &data, to_copy))
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index c202a44..95448ae 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -178,10 +178,10 @@
 
 void __init bfin_relocate_l1_mem(void)
 {
-	unsigned long l1_code_length;
-	unsigned long l1_data_a_length;
-	unsigned long l1_data_b_length;
-	unsigned long l2_length;
+	unsigned long text_l1_len = (unsigned long)_text_l1_len;
+	unsigned long data_l1_len = (unsigned long)_data_l1_len;
+	unsigned long data_b_l1_len = (unsigned long)_data_b_l1_len;
+	unsigned long l2_len = (unsigned long)_l2_len;
 
 	early_shadow_stamp();
 
@@ -201,30 +201,23 @@
 
 	blackfin_dma_early_init();
 
-	/* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
-	l1_code_length = _etext_l1 - _stext_l1;
-	if (l1_code_length)
-		early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
+	/* if necessary, copy L1 text to L1 instruction SRAM */
+	if (L1_CODE_LENGTH && text_l1_len)
+		early_dma_memcpy(_stext_l1, _text_l1_lma, text_l1_len);
 
-	/* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
-	l1_data_a_length = _sbss_l1 - _sdata_l1;
-	if (l1_data_a_length)
-		early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
+	/* if necessary, copy L1 data to L1 data bank A SRAM */
+	if (L1_DATA_A_LENGTH && data_l1_len)
+		early_dma_memcpy(_sdata_l1, _data_l1_lma, data_l1_len);
 
-	/* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
-	l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
-	if (l1_data_b_length)
-		early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
-			l1_data_a_length, l1_data_b_length);
+	/* if necessary, copy L1 data B to L1 data bank B SRAM */
+	if (L1_DATA_B_LENGTH && data_b_l1_len)
+		early_dma_memcpy(_sdata_b_l1, _data_b_l1_lma, data_b_l1_len);
 
 	early_dma_memcpy_done();
 
-	/* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */
-	if (L2_LENGTH != 0) {
-		l2_length = _sbss_l2 - _stext_l2;
-		if (l2_length)
-			memcpy(_stext_l2, _l2_lma_start, l2_length);
-	}
+	/* if necessary, copy L2 text/data to L2 SRAM */
+	if (L2_LENGTH && l2_len)
+		memcpy(_stext_l2, _l2_lma, l2_len);
 }
 
 /* add_memory_region to memmap */
@@ -608,11 +601,6 @@
 	page_mask_order = get_order(3 * page_mask_nelts * sizeof(long));
 #endif
 
-#if !defined(CONFIG_MTD_UCLINUX)
-	/*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
-	memory_end -= SIZE_4K;
-#endif
-
 	init_mm.start_code = (unsigned long)_stext;
 	init_mm.end_code = (unsigned long)_etext;
 	init_mm.end_data = (unsigned long)_edata;
@@ -917,7 +905,7 @@
 
 	printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
 	if (bfin_compiled_revid() == 0xffff)
-		printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
+		printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid());
 	else if (bfin_compiled_revid() == -1)
 		printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU);
 	else
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
index 9d90c18..e0fd63e 100644
--- a/arch/blackfin/kernel/signal.c
+++ b/arch/blackfin/kernel/signal.c
@@ -12,6 +12,7 @@
 #include <linux/binfmts.h>
 #include <linux/freezer.h>
 #include <linux/uaccess.h>
+#include <linux/tracehook.h>
 
 #include <asm/cacheflush.h>
 #include <asm/ucontext.h>
@@ -332,3 +333,20 @@
 		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 	}
 }
+
+/*
+ * notification of userspace execution resumption
+ */
+asmlinkage void do_notify_resume(struct pt_regs *regs)
+{
+	if (test_thread_flag(TIF_SIGPENDING) || test_thread_flag(TIF_RESTORE_SIGMASK))
+		do_signal(regs);
+
+	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
+	}
+}
+
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 359cfb1..17c38c5 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -22,8 +22,6 @@
 #include <asm/time.h>
 #include <asm/gptimers.h>
 
-#if defined(CONFIG_CYCLES_CLOCKSOURCE)
-
 /* Accelerators for sched_clock()
  * convert from cycles(64bits) => nanoseconds (64bits)
  *  basic equation:
@@ -46,20 +44,11 @@
  *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
  */
 
-static unsigned long cyc2ns_scale;
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
-static inline void set_cyc2ns_scale(unsigned long cpu_khz)
-{
-	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR) / cpu_khz;
-}
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
 
-static inline unsigned long long cycles_2_ns(cycle_t cyc)
-{
-	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
-}
-
-static cycle_t bfin_read_cycles(struct clocksource *cs)
+static notrace cycle_t bfin_read_cycles(struct clocksource *cs)
 {
 	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
 }
@@ -69,19 +58,18 @@
 	.rating		= 400,
 	.read		= bfin_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(64),
-	.shift		= 22,
+	.shift		= CYC2NS_SCALE_FACTOR,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-unsigned long long sched_clock(void)
+static inline unsigned long long bfin_cs_cycles_sched_clock(void)
 {
-	return cycles_2_ns(bfin_read_cycles(&bfin_cs_cycles));
+	return clocksource_cyc2ns(bfin_read_cycles(&bfin_cs_cycles),
+		bfin_cs_cycles.mult, bfin_cs_cycles.shift);
 }
 
 static int __init bfin_cs_cycles_init(void)
 {
-	set_cyc2ns_scale(get_cclk() / 1000);
-
 	bfin_cs_cycles.mult = \
 		clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift);
 
@@ -108,7 +96,7 @@
 	enable_gptimers(TIMER0bit);
 }
 
-static cycle_t bfin_read_gptimer0(void)
+static cycle_t bfin_read_gptimer0(struct clocksource *cs)
 {
 	return bfin_read_TIMER0_COUNTER();
 }
@@ -118,10 +106,16 @@
 	.rating		= 350,
 	.read		= bfin_read_gptimer0,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 22,
+	.shift		= CYC2NS_SCALE_FACTOR,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static inline unsigned long long bfin_cs_gptimer0_sched_clock(void)
+{
+	return clocksource_cyc2ns(bfin_read_TIMER0_COUNTER(),
+		bfin_cs_gptimer0.mult, bfin_cs_gptimer0.shift);
+}
+
 static int __init bfin_cs_gptimer0_init(void)
 {
 	setup_gptimer0();
@@ -138,6 +132,19 @@
 # define bfin_cs_gptimer0_init()
 #endif
 
+
+#if defined(CONFIG_GPTMR0_CLOCKSOURCE) || defined(CONFIG_CYCLES_CLOCKSOURCE)
+/* prefer to use cycles since it has higher rating */
+notrace unsigned long long sched_clock(void)
+{
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
+	return bfin_cs_cycles_sched_clock();
+#else
+	return bfin_cs_gptimer0_sched_clock();
+#endif
+}
+#endif
+
 #ifdef CONFIG_CORE_TIMER_IRQ_L1
 __attribute__((l1_text))
 #endif
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index bd3b53d..13c1ee3 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -184,11 +184,3 @@
 
 	time_sched_init(timer_interrupt);
 }
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
-	return (unsigned long long)jiffies *(NSEC_PER_SEC / HZ);
-}
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 9636bac..d3cbcd6 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -119,6 +119,15 @@
 		return;
 	}
 
+	/*
+	 * Don't walk any of the vmas if we are oopsing, it has been known
+	 * to cause problems - corrupt vmas (kernel crashes) cause double faults
+	 */
+	if (oops_in_progress) {
+		strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
+		return;
+	}
+
 	/* looks like we're off in user-land, so let's walk all the
 	 * mappings of all our processes and see if we can't be a whee
 	 * bit more specific
@@ -515,6 +524,36 @@
 			break;
 		/* External Memory Addressing Error */
 		case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):
+			if (ANOMALY_05000310) {
+				static unsigned long anomaly_rets;
+
+				if ((fp->pc >= (L1_CODE_START + L1_CODE_LENGTH - 512)) &&
+				    (fp->pc < (L1_CODE_START + L1_CODE_LENGTH))) {
+					/*
+					 * A false hardware error will happen while fetching at
+					 * the L1 instruction SRAM boundary.  Ignore it.
+					 */
+					anomaly_rets = fp->rets;
+					goto traps_done;
+				} else if (fp->rets == anomaly_rets) {
+					/*
+					 * While boundary code returns to a function, at the ret
+					 * point, a new false hardware error might occur too based
+					 * on tests.  Ignore it too.
+					 */
+					goto traps_done;
+				} else if ((fp->rets >= (L1_CODE_START + L1_CODE_LENGTH - 512)) &&
+				           (fp->rets < (L1_CODE_START + L1_CODE_LENGTH))) {
+					/*
+					 * If boundary code calls a function, at the entry point,
+					 * a new false hardware error maybe happen based on tests.
+					 * Ignore it too.
+					 */
+					goto traps_done;
+				} else
+					anomaly_rets = 0;
+			}
+
 			info.si_code = BUS_ADRERR;
 			sig = SIGBUS;
 			strerror = KERN_NOTICE HWC_x3(KERN_NOTICE);
@@ -976,12 +1015,12 @@
 	    !((unsigned long)current & 0x3) && current->pid) {
 		verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n");
 		if (current->comm >= (char *)FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE "COMM=%s PID=%d\n",
+			verbose_printk(KERN_NOTICE "COMM=%s PID=%d",
 				current->comm, current->pid);
 		else
-			verbose_printk(KERN_NOTICE "COMM= invalid\n");
+			verbose_printk(KERN_NOTICE "COMM= invalid");
 
-		printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu);
+		printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu);
 		if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
 			verbose_printk(KERN_NOTICE
 				"TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index f39707c..66799e7 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -121,8 +121,6 @@
 		EXIT_DATA
 	}
 
-	__l1_lma_start = .;
-
 	.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
 	{
 		. = ALIGN(4);
@@ -134,9 +132,11 @@
 		. = ALIGN(4);
 		__etext_l1 = .;
 	}
-	ASSERT (SIZEOF(.text_l1) <= L1_CODE_LENGTH, "L1 text overflow!")
+	__text_l1_lma = LOADADDR(.text_l1);
+	__text_l1_len = SIZEOF(.text_l1);
+	ASSERT (__text_l1_len <= L1_CODE_LENGTH, "L1 text overflow!")
 
-	.data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1))
+	.data_l1 L1_DATA_A_START : AT(__text_l1_lma + __text_l1_len)
 	{
 		. = ALIGN(4);
 		__sdata_l1 = .;
@@ -152,9 +152,11 @@
 		. = ALIGN(4);
 		__ebss_l1 = .;
 	}
-	ASSERT (SIZEOF(.data_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!")
+	__data_l1_lma = LOADADDR(.data_l1);
+	__data_l1_len = SIZEOF(.data_l1);
+	ASSERT (__data_l1_len <= L1_DATA_A_LENGTH, "L1 data A overflow!")
 
-	.data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
+	.data_b_l1 L1_DATA_B_START : AT(__data_l1_lma + __data_l1_len)
 	{
 		. = ALIGN(4);
 		__sdata_b_l1 = .;
@@ -167,11 +169,11 @@
 		. = ALIGN(4);
 		__ebss_b_l1 = .;
 	}
-	ASSERT (SIZEOF(.data_b_l1) <= L1_DATA_B_LENGTH, "L1 data B overflow!")
+	__data_b_l1_lma = LOADADDR(.data_b_l1);
+	__data_b_l1_len = SIZEOF(.data_b_l1);
+	ASSERT (__data_b_l1_len <= L1_DATA_B_LENGTH, "L1 data B overflow!")
 
-	__l2_lma_start = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
-
-	.text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
+	.text_data_l2 L2_START : AT(__data_b_l1_lma + __data_b_l1_len)
 	{
 		. = ALIGN(4);
 		__stext_l2 = .;
@@ -193,12 +195,14 @@
 		. = ALIGN(4);
 		__ebss_l2 = .;
 	}
-	ASSERT (SIZEOF(.text_data_l2) <= L2_LENGTH, "L2 overflow!")
+	__l2_lma = LOADADDR(.text_data_l2);
+	__l2_len = SIZEOF(.text_data_l2);
+	ASSERT (__l2_len <= L2_LENGTH, "L2 overflow!")
 
 	/* Force trailing alignment of our init section so that when we
 	 * free our init memory, we don't leave behind a partial page.
 	 */
-	. = LOADADDR(.text_data_l2) + SIZEOF(.text_data_l2);
+	. = __l2_lma + __l2_len;
 	. = ALIGN(PAGE_SIZE);
 	___init_end = .;
 
diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile
index 635288f..42c47dc 100644
--- a/arch/blackfin/lib/Makefile
+++ b/arch/blackfin/lib/Makefile
@@ -5,7 +5,7 @@
 lib-y := \
 	ashldi3.o ashrdi3.o lshrdi3.o \
 	muldi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
-	checksum.o memcpy.o memset.o memcmp.o memchr.o memmove.o \
+	memcpy.o memset.o memcmp.o memchr.o memmove.o \
 	strcmp.o strcpy.o strncmp.o strncpy.o \
 	umulsi3_highpart.o smulsi3_highpart.o \
 	ins.o outs.o
diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c
deleted file mode 100644
index c62969d..0000000
--- a/arch/blackfin/lib/checksum.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- *
- * An implementation of the TCP/IP protocol suite for the LINUX operating
- * system. INET is implemented using the BSD Socket interface as the
- * means of communication with the user level.
- *
- */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-#include <asm/checksum.h>
-
-#ifdef CONFIG_IP_CHECKSUM_L1
-static unsigned short do_csum(const unsigned char *buff, int len)__attribute__((l1_text));
-#endif
-
-static unsigned short do_csum(const unsigned char *buff, int len)
-{
-	register unsigned long sum = 0;
-	int swappem = 0;
-
-	if (1 & (unsigned long)buff) {
-		sum = *buff << 8;
-		buff++;
-		len--;
-		++swappem;
-	}
-
-	while (len > 1) {
-		sum += *(unsigned short *)buff;
-		buff += 2;
-		len -= 2;
-	}
-
-	if (len > 0)
-		sum += *buff;
-
-	/*  Fold 32-bit sum to 16 bits */
-	while (sum >> 16)
-		sum = (sum & 0xffff) + (sum >> 16);
-
-	if (swappem)
-		sum = ((sum & 0xff00) >> 8) + ((sum & 0x00ff) << 8);
-
-	return sum;
-
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph, ihl * 4);
-}
-EXPORT_SYMBOL(ip_fast_csum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
-	/*
-	 * Just in case we get nasty checksum data...
-	 * Like 0xffff6ec3 in the case of our IPv6 multicast header.
-	 * We fold to begin with, as well as at the end.
-	 */
-	sum = (sum & 0xffff) + (sum >> 16);
-
-	sum += do_csum(buff, len);
-
-	sum = (sum & 0xffff) + (sum >> 16);
-
-	return sum;
-}
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff, len);
-}
-EXPORT_SYMBOL(ip_compute_csum);
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst,
-			    int len, __wsum sum, int *csum_err)
-{
-	if (csum_err)
-		*csum_err = 0;
-	memcpy(dst, (__force void *)src, len);
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-
-__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
-{
-	memcpy(dst, src, len);
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy);
diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig
index 4c76fef..4ab2d16 100644
--- a/arch/blackfin/mach-bf518/Kconfig
+++ b/arch/blackfin/mach-bf518/Kconfig
@@ -1,3 +1,7 @@
+config BF51x
+	def_bool y
+	depends on (BF512 || BF514 || BF516 || BF518)
+
 if (BF51x)
 
 source "arch/blackfin/mach-bf518/boards/Kconfig"
diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h
index 6cfb246..9053462 100644
--- a/arch/blackfin/mach-bf518/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -58,10 +58,4 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* PLL_DIV Masks													*/
-#define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
-#define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
-#define CCLK_DIV4 CSEL_DIV4	/*          CCLK = VCO / 4                                  */
-#define CCLK_DIV8 CSEL_DIV8	/*          CCLK = VCO / 8                                  */
-
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
index e1d9991..108fa4b 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
@@ -1,7 +1,7 @@
 /*
  * Copyright 2008-2009 Analog Devices Inc.
  *
- * Licensed under the GPL-2 or later
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _CDEF_BF514_H
@@ -10,15 +10,8 @@
 /* include all Core registers and bit definitions */
 #include "defBF514.h"
 
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */
-
-/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "cdefBF51x_base.h"
-
-/* The following are the #defines needed by ADSP-BF514 that are not in the common header */
+/* BF514 is BF512 + RSI */
+#include "cdefBF512.h"
 
 /* Removable Storage Interface Registers */
 
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
index 6b364ed..2751592 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
@@ -1,7 +1,7 @@
 /*
  * Copyright 2008-2009 Analog Devices Inc.
  *
- * Licensed under the GPL-2 or later
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _CDEF_BF516_H
@@ -10,15 +10,8 @@
 /* include all Core registers and bit definitions */
 #include "defBF516.h"
 
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */
-
-/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "cdefBF51x_base.h"
-
-/* The following are the #defines needed by ADSP-BF516 that are not in the common header */
+/* BF516 is BF514 + EMAC */
+#include "cdefBF514.h"
 
 /* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
 
@@ -185,71 +178,4 @@
 #define bfin_read_EMAC_TXC_ABORT()		bfin_read32(EMAC_TXC_ABORT)
 #define bfin_write_EMAC_TXC_ABORT(val)		bfin_write32(EMAC_TXC_ABORT, val)
 
-/* Removable Storage Interface Registers */
-
-#define bfin_read_RSI_PWR_CTL()        bfin_read16(RSI_PWR_CONTROL)
-#define bfin_write_RSI_PWR_CTL(val)    bfin_write16(RSI_PWR_CONTROL, val)
-#define bfin_read_RSI_CLK_CTL()	       bfin_read16(RSI_CLK_CONTROL)
-#define bfin_write_RSI_CLK_CTL(val)    bfin_write16(RSI_CLK_CONTROL, val)
-#define bfin_read_RSI_ARGUMENT()       bfin_read32(RSI_ARGUMENT)
-#define bfin_write_RSI_ARGUMENT(val)   bfin_write32(RSI_ARGUMENT, val)
-#define bfin_read_RSI_COMMAND()        bfin_read16(RSI_COMMAND)
-#define bfin_write_RSI_COMMAND(val)    bfin_write16(RSI_COMMAND, val)
-#define bfin_read_RSI_RESP_CMD()       bfin_read16(RSI_RESP_CMD)
-#define bfin_write_RSI_RESP_CMD(val)   bfin_write16(RSI_RESP_CMD, val)
-#define bfin_read_RSI_RESPONSE0()      bfin_read32(RSI_RESPONSE0)
-#define bfin_write_RSI_RESPONSE0(val)  bfin_write32(RSI_RESPONSE0, val)
-#define bfin_read_RSI_RESPONSE1()      bfin_read32(RSI_RESPONSE1)
-#define bfin_write_RSI_RESPONSE1(val)  bfin_write32(RSI_RESPONSE1, val)
-#define bfin_read_RSI_RESPONSE2()      bfin_read32(RSI_RESPONSE2)
-#define bfin_write_RSI_RESPONSE2(val)  bfin_write32(RSI_RESPONSE2, val)
-#define bfin_read_RSI_RESPONSE3()      bfin_read32(RSI_RESPONSE3)
-#define bfin_write_RSI_RESPONSE3(val)  bfin_write32(RSI_RESPONSE3, val)
-#define bfin_read_RSI_DATA_TIMER()     bfin_read32(RSI_DATA_TIMER)
-#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val)
-#define bfin_read_RSI_DATA_LGTH()      bfin_read16(RSI_DATA_LGTH)
-#define bfin_write_RSI_DATA_LGTH(val)  bfin_write16(RSI_DATA_LGTH, val)
-#define bfin_read_RSI_DATA_CTL()       bfin_read16(RSI_DATA_CONTROL)
-#define bfin_write_RSI_DATA_CTL(val)   bfin_write16(RSI_DATA_CONTROL, val)
-#define bfin_read_RSI_DATA_CNT()       bfin_read16(RSI_DATA_CNT)
-#define bfin_write_RSI_DATA_CNT(val)   bfin_write16(RSI_DATA_CNT, val)
-#define bfin_read_RSI_STATUS()         bfin_read32(RSI_STATUS)
-#define bfin_write_RSI_STATUS(val)     bfin_write32(RSI_STATUS, val)
-#define bfin_read_RSI_STATUS_CLR()     bfin_read16(RSI_STATUSCL)
-#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val)
-#define bfin_read_RSI_MASK0()          bfin_read32(RSI_MASK0)
-#define bfin_write_RSI_MASK0(val)      bfin_write32(RSI_MASK0, val)
-#define bfin_read_RSI_MASK1()          bfin_read32(RSI_MASK1)
-#define bfin_write_RSI_MASK1(val)      bfin_write32(RSI_MASK1, val)
-#define bfin_read_RSI_FIFO_CNT()       bfin_read16(RSI_FIFO_CNT)
-#define bfin_write_RSI_FIFO_CNT(val)   bfin_write16(RSI_FIFO_CNT, val)
-#define bfin_read_RSI_CEATA_CTL()      bfin_read16(RSI_CEATA_CONTROL)
-#define bfin_write_RSI_CEATA_CTL(val)  bfin_write16(RSI_CEATA_CONTROL, val)
-#define bfin_read_RSI_FIFO()           bfin_read32(RSI_FIFO)
-#define bfin_write_RSI_FIFO(val)       bfin_write32(RSI_FIFO, val)
-#define bfin_read_RSI_E_STATUS()       bfin_read16(RSI_ESTAT)
-#define bfin_write_RSI_E_STATUS(val)   bfin_write16(RSI_ESTAT, val)
-#define bfin_read_RSI_E_MASK()         bfin_read16(RSI_EMASK)
-#define bfin_write_RSI_E_MASK(val)     bfin_write16(RSI_EMASK, val)
-#define bfin_read_RSI_CFG()            bfin_read16(RSI_CONFIG)
-#define bfin_write_RSI_CFG(val)        bfin_write16(RSI_CONFIG, val)
-#define bfin_read_RSI_RD_WAIT_EN()     bfin_read16(RSI_RD_WAIT_EN)
-#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val)
-#define bfin_read_RSI_PID0()           bfin_read16(RSI_PID0)
-#define bfin_write_RSI_PID0(val)       bfin_write16(RSI_PID0, val)
-#define bfin_read_RSI_PID1()           bfin_read16(RSI_PID1)
-#define bfin_write_RSI_PID1(val)       bfin_write16(RSI_PID1, val)
-#define bfin_read_RSI_PID2()           bfin_read16(RSI_PID2)
-#define bfin_write_RSI_PID2(val)       bfin_write16(RSI_PID2, val)
-#define bfin_read_RSI_PID3()           bfin_read16(RSI_PID3)
-#define bfin_write_RSI_PID3(val)       bfin_write16(RSI_PID3, val)
-#define bfin_read_RSI_PID4()           bfin_read16(RSI_PID4)
-#define bfin_write_RSI_PID4(val)       bfin_write16(RSI_PID4, val)
-#define bfin_read_RSI_PID5()           bfin_read16(RSI_PID5)
-#define bfin_write_RSI_PID5(val)       bfin_write16(RSI_PID5, val)
-#define bfin_read_RSI_PID6()           bfin_read16(RSI_PID6)
-#define bfin_write_RSI_PID6(val)       bfin_write16(RSI_PID6, val)
-#define bfin_read_RSI_PID7()           bfin_read16(RSI_PID7)
-#define bfin_write_RSI_PID7(val)       bfin_write16(RSI_PID7, val)
-
 #endif /* _CDEF_BF516_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
index 929b906..7fb7f0e 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
@@ -1,7 +1,7 @@
 /*
  * Copyright 2008-2009 Analog Devices Inc.
  *
- * Licensed under the GPL-2 or later
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
 #ifndef _CDEF_BF518_H
@@ -10,181 +10,10 @@
 /* include all Core registers and bit definitions */
 #include "defBF518.h"
 
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
+/* BF518 is BF516 + IEEE-1588 */
+#include "cdefBF516.h"
 
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */
-
-/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "cdefBF51x_base.h"
-
-/* The following are the #defines needed by ADSP-BF518 that are not in the common header */
-
-
-/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
-
-#define bfin_read_EMAC_OPMODE()			bfin_read32(EMAC_OPMODE)
-#define bfin_write_EMAC_OPMODE(val)		bfin_write32(EMAC_OPMODE, val)
-#define bfin_read_EMAC_ADDRLO()			bfin_read32(EMAC_ADDRLO)
-#define bfin_write_EMAC_ADDRLO(val)		bfin_write32(EMAC_ADDRLO, val)
-#define bfin_read_EMAC_ADDRHI()			bfin_read32(EMAC_ADDRHI)
-#define bfin_write_EMAC_ADDRHI(val)		bfin_write32(EMAC_ADDRHI, val)
-#define bfin_read_EMAC_HASHLO()			bfin_read32(EMAC_HASHLO)
-#define bfin_write_EMAC_HASHLO(val)		bfin_write32(EMAC_HASHLO, val)
-#define bfin_read_EMAC_HASHHI()			bfin_read32(EMAC_HASHHI)
-#define bfin_write_EMAC_HASHHI(val)		bfin_write32(EMAC_HASHHI, val)
-#define bfin_read_EMAC_STAADD()			bfin_read32(EMAC_STAADD)
-#define bfin_write_EMAC_STAADD(val)		bfin_write32(EMAC_STAADD, val)
-#define bfin_read_EMAC_STADAT()			bfin_read32(EMAC_STADAT)
-#define bfin_write_EMAC_STADAT(val)		bfin_write32(EMAC_STADAT, val)
-#define bfin_read_EMAC_FLC()			bfin_read32(EMAC_FLC)
-#define bfin_write_EMAC_FLC(val)		bfin_write32(EMAC_FLC, val)
-#define bfin_read_EMAC_VLAN1()			bfin_read32(EMAC_VLAN1)
-#define bfin_write_EMAC_VLAN1(val)		bfin_write32(EMAC_VLAN1, val)
-#define bfin_read_EMAC_VLAN2()			bfin_read32(EMAC_VLAN2)
-#define bfin_write_EMAC_VLAN2(val)		bfin_write32(EMAC_VLAN2, val)
-#define bfin_read_EMAC_WKUP_CTL()		bfin_read32(EMAC_WKUP_CTL)
-#define bfin_write_EMAC_WKUP_CTL(val)		bfin_write32(EMAC_WKUP_CTL, val)
-#define bfin_read_EMAC_WKUP_FFMSK0()		bfin_read32(EMAC_WKUP_FFMSK0)
-#define bfin_write_EMAC_WKUP_FFMSK0(val)	bfin_write32(EMAC_WKUP_FFMSK0, val)
-#define bfin_read_EMAC_WKUP_FFMSK1()		bfin_read32(EMAC_WKUP_FFMSK1)
-#define bfin_write_EMAC_WKUP_FFMSK1(val)	bfin_write32(EMAC_WKUP_FFMSK1, val)
-#define bfin_read_EMAC_WKUP_FFMSK2()		bfin_read32(EMAC_WKUP_FFMSK2)
-#define bfin_write_EMAC_WKUP_FFMSK2(val)	bfin_write32(EMAC_WKUP_FFMSK2, val)
-#define bfin_read_EMAC_WKUP_FFMSK3()		bfin_read32(EMAC_WKUP_FFMSK3)
-#define bfin_write_EMAC_WKUP_FFMSK3(val)	bfin_write32(EMAC_WKUP_FFMSK3, val)
-#define bfin_read_EMAC_WKUP_FFCMD()		bfin_read32(EMAC_WKUP_FFCMD)
-#define bfin_write_EMAC_WKUP_FFCMD(val)		bfin_write32(EMAC_WKUP_FFCMD, val)
-#define bfin_read_EMAC_WKUP_FFOFF()		bfin_read32(EMAC_WKUP_FFOFF)
-#define bfin_write_EMAC_WKUP_FFOFF(val)		bfin_write32(EMAC_WKUP_FFOFF, val)
-#define bfin_read_EMAC_WKUP_FFCRC0()		bfin_read32(EMAC_WKUP_FFCRC0)
-#define bfin_write_EMAC_WKUP_FFCRC0(val)	bfin_write32(EMAC_WKUP_FFCRC0, val)
-#define bfin_read_EMAC_WKUP_FFCRC1()		bfin_read32(EMAC_WKUP_FFCRC1)
-#define bfin_write_EMAC_WKUP_FFCRC1(val)	bfin_write32(EMAC_WKUP_FFCRC1, val)
-
-#define bfin_read_EMAC_SYSCTL()			bfin_read32(EMAC_SYSCTL)
-#define bfin_write_EMAC_SYSCTL(val)		bfin_write32(EMAC_SYSCTL, val)
-#define bfin_read_EMAC_SYSTAT()			bfin_read32(EMAC_SYSTAT)
-#define bfin_write_EMAC_SYSTAT(val)		bfin_write32(EMAC_SYSTAT, val)
-#define bfin_read_EMAC_RX_STAT()		bfin_read32(EMAC_RX_STAT)
-#define bfin_write_EMAC_RX_STAT(val)		bfin_write32(EMAC_RX_STAT, val)
-#define bfin_read_EMAC_RX_STKY()		bfin_read32(EMAC_RX_STKY)
-#define bfin_write_EMAC_RX_STKY(val)		bfin_write32(EMAC_RX_STKY, val)
-#define bfin_read_EMAC_RX_IRQE()		bfin_read32(EMAC_RX_IRQE)
-#define bfin_write_EMAC_RX_IRQE(val)		bfin_write32(EMAC_RX_IRQE, val)
-#define bfin_read_EMAC_TX_STAT()		bfin_read32(EMAC_TX_STAT)
-#define bfin_write_EMAC_TX_STAT(val)		bfin_write32(EMAC_TX_STAT, val)
-#define bfin_read_EMAC_TX_STKY()		bfin_read32(EMAC_TX_STKY)
-#define bfin_write_EMAC_TX_STKY(val)		bfin_write32(EMAC_TX_STKY, val)
-#define bfin_read_EMAC_TX_IRQE()		bfin_read32(EMAC_TX_IRQE)
-#define bfin_write_EMAC_TX_IRQE(val)		bfin_write32(EMAC_TX_IRQE, val)
-
-#define bfin_read_EMAC_MMC_CTL()		bfin_read32(EMAC_MMC_CTL)
-#define bfin_write_EMAC_MMC_CTL(val)		bfin_write32(EMAC_MMC_CTL, val)
-#define bfin_read_EMAC_MMC_RIRQS()		bfin_read32(EMAC_MMC_RIRQS)
-#define bfin_write_EMAC_MMC_RIRQS(val)		bfin_write32(EMAC_MMC_RIRQS, val)
-#define bfin_read_EMAC_MMC_RIRQE()		bfin_read32(EMAC_MMC_RIRQE)
-#define bfin_write_EMAC_MMC_RIRQE(val)		bfin_write32(EMAC_MMC_RIRQE, val)
-#define bfin_read_EMAC_MMC_TIRQS()		bfin_read32(EMAC_MMC_TIRQS)
-#define bfin_write_EMAC_MMC_TIRQS(val)		bfin_write32(EMAC_MMC_TIRQS, val)
-#define bfin_read_EMAC_MMC_TIRQE()		bfin_read32(EMAC_MMC_TIRQE)
-#define bfin_write_EMAC_MMC_TIRQE(val)		bfin_write32(EMAC_MMC_TIRQE, val)
-
-#define bfin_read_EMAC_RXC_OK()			bfin_read32(EMAC_RXC_OK)
-#define bfin_write_EMAC_RXC_OK(val)		bfin_write32(EMAC_RXC_OK, val)
-#define bfin_read_EMAC_RXC_FCS()		bfin_read32(EMAC_RXC_FCS)
-#define bfin_write_EMAC_RXC_FCS(val)		bfin_write32(EMAC_RXC_FCS, val)
-#define bfin_read_EMAC_RXC_ALIGN()		bfin_read32(EMAC_RXC_ALIGN)
-#define bfin_write_EMAC_RXC_ALIGN(val)		bfin_write32(EMAC_RXC_ALIGN, val)
-#define bfin_read_EMAC_RXC_OCTET()		bfin_read32(EMAC_RXC_OCTET)
-#define bfin_write_EMAC_RXC_OCTET(val)		bfin_write32(EMAC_RXC_OCTET, val)
-#define bfin_read_EMAC_RXC_DMAOVF()		bfin_read32(EMAC_RXC_DMAOVF)
-#define bfin_write_EMAC_RXC_DMAOVF(val)		bfin_write32(EMAC_RXC_DMAOVF, val)
-#define bfin_read_EMAC_RXC_UNICST()		bfin_read32(EMAC_RXC_UNICST)
-#define bfin_write_EMAC_RXC_UNICST(val)		bfin_write32(EMAC_RXC_UNICST, val)
-#define bfin_read_EMAC_RXC_MULTI()		bfin_read32(EMAC_RXC_MULTI)
-#define bfin_write_EMAC_RXC_MULTI(val)		bfin_write32(EMAC_RXC_MULTI, val)
-#define bfin_read_EMAC_RXC_BROAD()		bfin_read32(EMAC_RXC_BROAD)
-#define bfin_write_EMAC_RXC_BROAD(val)		bfin_write32(EMAC_RXC_BROAD, val)
-#define bfin_read_EMAC_RXC_LNERRI()		bfin_read32(EMAC_RXC_LNERRI)
-#define bfin_write_EMAC_RXC_LNERRI(val)		bfin_write32(EMAC_RXC_LNERRI, val)
-#define bfin_read_EMAC_RXC_LNERRO()		bfin_read32(EMAC_RXC_LNERRO)
-#define bfin_write_EMAC_RXC_LNERRO(val)		bfin_write32(EMAC_RXC_LNERRO, val)
-#define bfin_read_EMAC_RXC_LONG()		bfin_read32(EMAC_RXC_LONG)
-#define bfin_write_EMAC_RXC_LONG(val)		bfin_write32(EMAC_RXC_LONG, val)
-#define bfin_read_EMAC_RXC_MACCTL()		bfin_read32(EMAC_RXC_MACCTL)
-#define bfin_write_EMAC_RXC_MACCTL(val)		bfin_write32(EMAC_RXC_MACCTL, val)
-#define bfin_read_EMAC_RXC_OPCODE()		bfin_read32(EMAC_RXC_OPCODE)
-#define bfin_write_EMAC_RXC_OPCODE(val)		bfin_write32(EMAC_RXC_OPCODE, val)
-#define bfin_read_EMAC_RXC_PAUSE()		bfin_read32(EMAC_RXC_PAUSE)
-#define bfin_write_EMAC_RXC_PAUSE(val)		bfin_write32(EMAC_RXC_PAUSE, val)
-#define bfin_read_EMAC_RXC_ALLFRM()		bfin_read32(EMAC_RXC_ALLFRM)
-#define bfin_write_EMAC_RXC_ALLFRM(val)		bfin_write32(EMAC_RXC_ALLFRM, val)
-#define bfin_read_EMAC_RXC_ALLOCT()		bfin_read32(EMAC_RXC_ALLOCT)
-#define bfin_write_EMAC_RXC_ALLOCT(val)		bfin_write32(EMAC_RXC_ALLOCT, val)
-#define bfin_read_EMAC_RXC_TYPED()		bfin_read32(EMAC_RXC_TYPED)
-#define bfin_write_EMAC_RXC_TYPED(val)		bfin_write32(EMAC_RXC_TYPED, val)
-#define bfin_read_EMAC_RXC_SHORT()		bfin_read32(EMAC_RXC_SHORT)
-#define bfin_write_EMAC_RXC_SHORT(val)		bfin_write32(EMAC_RXC_SHORT, val)
-#define bfin_read_EMAC_RXC_EQ64()		bfin_read32(EMAC_RXC_EQ64)
-#define bfin_write_EMAC_RXC_EQ64(val)		bfin_write32(EMAC_RXC_EQ64, val)
-#define bfin_read_EMAC_RXC_LT128()		bfin_read32(EMAC_RXC_LT128)
-#define bfin_write_EMAC_RXC_LT128(val)		bfin_write32(EMAC_RXC_LT128, val)
-#define bfin_read_EMAC_RXC_LT256()		bfin_read32(EMAC_RXC_LT256)
-#define bfin_write_EMAC_RXC_LT256(val)		bfin_write32(EMAC_RXC_LT256, val)
-#define bfin_read_EMAC_RXC_LT512()		bfin_read32(EMAC_RXC_LT512)
-#define bfin_write_EMAC_RXC_LT512(val)		bfin_write32(EMAC_RXC_LT512, val)
-#define bfin_read_EMAC_RXC_LT1024()		bfin_read32(EMAC_RXC_LT1024)
-#define bfin_write_EMAC_RXC_LT1024(val)		bfin_write32(EMAC_RXC_LT1024, val)
-#define bfin_read_EMAC_RXC_GE1024()		bfin_read32(EMAC_RXC_GE1024)
-#define bfin_write_EMAC_RXC_GE1024(val)		bfin_write32(EMAC_RXC_GE1024, val)
-
-#define bfin_read_EMAC_TXC_OK()			bfin_read32(EMAC_TXC_OK)
-#define bfin_write_EMAC_TXC_OK(val)		bfin_write32(EMAC_TXC_OK, val)
-#define bfin_read_EMAC_TXC_1COL()		bfin_read32(EMAC_TXC_1COL)
-#define bfin_write_EMAC_TXC_1COL(val)		bfin_write32(EMAC_TXC_1COL, val)
-#define bfin_read_EMAC_TXC_GT1COL()		bfin_read32(EMAC_TXC_GT1COL)
-#define bfin_write_EMAC_TXC_GT1COL(val)		bfin_write32(EMAC_TXC_GT1COL, val)
-#define bfin_read_EMAC_TXC_OCTET()		bfin_read32(EMAC_TXC_OCTET)
-#define bfin_write_EMAC_TXC_OCTET(val)		bfin_write32(EMAC_TXC_OCTET, val)
-#define bfin_read_EMAC_TXC_DEFER()		bfin_read32(EMAC_TXC_DEFER)
-#define bfin_write_EMAC_TXC_DEFER(val)		bfin_write32(EMAC_TXC_DEFER, val)
-#define bfin_read_EMAC_TXC_LATECL()		bfin_read32(EMAC_TXC_LATECL)
-#define bfin_write_EMAC_TXC_LATECL(val)		bfin_write32(EMAC_TXC_LATECL, val)
-#define bfin_read_EMAC_TXC_XS_COL()		bfin_read32(EMAC_TXC_XS_COL)
-#define bfin_write_EMAC_TXC_XS_COL(val)		bfin_write32(EMAC_TXC_XS_COL, val)
-#define bfin_read_EMAC_TXC_DMAUND()		bfin_read32(EMAC_TXC_DMAUND)
-#define bfin_write_EMAC_TXC_DMAUND(val)		bfin_write32(EMAC_TXC_DMAUND, val)
-#define bfin_read_EMAC_TXC_CRSERR()		bfin_read32(EMAC_TXC_CRSERR)
-#define bfin_write_EMAC_TXC_CRSERR(val)		bfin_write32(EMAC_TXC_CRSERR, val)
-#define bfin_read_EMAC_TXC_UNICST()		bfin_read32(EMAC_TXC_UNICST)
-#define bfin_write_EMAC_TXC_UNICST(val)		bfin_write32(EMAC_TXC_UNICST, val)
-#define bfin_read_EMAC_TXC_MULTI()		bfin_read32(EMAC_TXC_MULTI)
-#define bfin_write_EMAC_TXC_MULTI(val)		bfin_write32(EMAC_TXC_MULTI, val)
-#define bfin_read_EMAC_TXC_BROAD()		bfin_read32(EMAC_TXC_BROAD)
-#define bfin_write_EMAC_TXC_BROAD(val)		bfin_write32(EMAC_TXC_BROAD, val)
-#define bfin_read_EMAC_TXC_XS_DFR()		bfin_read32(EMAC_TXC_XS_DFR)
-#define bfin_write_EMAC_TXC_XS_DFR(val)		bfin_write32(EMAC_TXC_XS_DFR, val)
-#define bfin_read_EMAC_TXC_MACCTL()		bfin_read32(EMAC_TXC_MACCTL)
-#define bfin_write_EMAC_TXC_MACCTL(val)		bfin_write32(EMAC_TXC_MACCTL, val)
-#define bfin_read_EMAC_TXC_ALLFRM()		bfin_read32(EMAC_TXC_ALLFRM)
-#define bfin_write_EMAC_TXC_ALLFRM(val)		bfin_write32(EMAC_TXC_ALLFRM, val)
-#define bfin_read_EMAC_TXC_ALLOCT()		bfin_read32(EMAC_TXC_ALLOCT)
-#define bfin_write_EMAC_TXC_ALLOCT(val)		bfin_write32(EMAC_TXC_ALLOCT, val)
-#define bfin_read_EMAC_TXC_EQ64()		bfin_read32(EMAC_TXC_EQ64)
-#define bfin_write_EMAC_TXC_EQ64(val)		bfin_write32(EMAC_TXC_EQ64, val)
-#define bfin_read_EMAC_TXC_LT128()		bfin_read32(EMAC_TXC_LT128)
-#define bfin_write_EMAC_TXC_LT128(val)		bfin_write32(EMAC_TXC_LT128, val)
-#define bfin_read_EMAC_TXC_LT256()		bfin_read32(EMAC_TXC_LT256)
-#define bfin_write_EMAC_TXC_LT256(val)		bfin_write32(EMAC_TXC_LT256, val)
-#define bfin_read_EMAC_TXC_LT512()		bfin_read32(EMAC_TXC_LT512)
-#define bfin_write_EMAC_TXC_LT512(val)		bfin_write32(EMAC_TXC_LT512, val)
-#define bfin_read_EMAC_TXC_LT1024()		bfin_read32(EMAC_TXC_LT1024)
-#define bfin_write_EMAC_TXC_LT1024(val)		bfin_write32(EMAC_TXC_LT1024, val)
-#define bfin_read_EMAC_TXC_GE1024()		bfin_read32(EMAC_TXC_GE1024)
-#define bfin_write_EMAC_TXC_GE1024(val)		bfin_write32(EMAC_TXC_GE1024, val)
-#define bfin_read_EMAC_TXC_ABORT()		bfin_read32(EMAC_TXC_ABORT)
-#define bfin_write_EMAC_TXC_ABORT(val)		bfin_write32(EMAC_TXC_ABORT, val)
+/* PTP TSYNC Registers */
 
 #define bfin_read_EMAC_PTP_CTL()                bfin_read16(EMAC_PTP_CTL)
 #define bfin_write_EMAC_PTP_CTL(val)            bfin_write16(EMAC_PTP_CTL, val)
@@ -227,72 +56,4 @@
 #define bfin_read_EMAC_PTP_PPS_PERIOD()         bfin_read32(EMAC_PTP_PPS_PERIOD)
 #define bfin_write_EMAC_PTP_PPS_PERIOD(val)     bfin_write32(EMAC_PTP_PPS_PERIOD, val)
 
-/* Removable Storage Interface Registers */
-
-#define bfin_read_RSI_PWR_CTL()        bfin_read16(RSI_PWR_CONTROL)
-#define bfin_write_RSI_PWR_CTL(val)    bfin_write16(RSI_PWR_CONTROL, val)
-#define bfin_read_RSI_CLK_CTL()	       bfin_read16(RSI_CLK_CONTROL)
-#define bfin_write_RSI_CLK_CTL(val)    bfin_write16(RSI_CLK_CONTROL, val)
-#define bfin_read_RSI_ARGUMENT()       bfin_read32(RSI_ARGUMENT)
-#define bfin_write_RSI_ARGUMENT(val)   bfin_write32(RSI_ARGUMENT, val)
-#define bfin_read_RSI_COMMAND()        bfin_read16(RSI_COMMAND)
-#define bfin_write_RSI_COMMAND(val)    bfin_write16(RSI_COMMAND, val)
-#define bfin_read_RSI_RESP_CMD()       bfin_read16(RSI_RESP_CMD)
-#define bfin_write_RSI_RESP_CMD(val)   bfin_write16(RSI_RESP_CMD, val)
-#define bfin_read_RSI_RESPONSE0()      bfin_read32(RSI_RESPONSE0)
-#define bfin_write_RSI_RESPONSE0(val)  bfin_write32(RSI_RESPONSE0, val)
-#define bfin_read_RSI_RESPONSE1()      bfin_read32(RSI_RESPONSE1)
-#define bfin_write_RSI_RESPONSE1(val)  bfin_write32(RSI_RESPONSE1, val)
-#define bfin_read_RSI_RESPONSE2()      bfin_read32(RSI_RESPONSE2)
-#define bfin_write_RSI_RESPONSE2(val)  bfin_write32(RSI_RESPONSE2, val)
-#define bfin_read_RSI_RESPONSE3()      bfin_read32(RSI_RESPONSE3)
-#define bfin_write_RSI_RESPONSE3(val)  bfin_write32(RSI_RESPONSE3, val)
-#define bfin_read_RSI_DATA_TIMER()     bfin_read32(RSI_DATA_TIMER)
-#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val)
-#define bfin_read_RSI_DATA_LGTH()      bfin_read16(RSI_DATA_LGTH)
-#define bfin_write_RSI_DATA_LGTH(val)  bfin_write16(RSI_DATA_LGTH, val)
-#define bfin_read_RSI_DATA_CTL()       bfin_read16(RSI_DATA_CONTROL)
-#define bfin_write_RSI_DATA_CTL(val)   bfin_write16(RSI_DATA_CONTROL, val)
-#define bfin_read_RSI_DATA_CNT()       bfin_read16(RSI_DATA_CNT)
-#define bfin_write_RSI_DATA_CNT(val)   bfin_write16(RSI_DATA_CNT, val)
-#define bfin_read_RSI_STATUS()         bfin_read32(RSI_STATUS)
-#define bfin_write_RSI_STATUS(val)     bfin_write32(RSI_STATUS, val)
-#define bfin_read_RSI_STATUS_CLR()     bfin_read16(RSI_STATUSCL)
-#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val)
-#define bfin_read_RSI_MASK0()          bfin_read32(RSI_MASK0)
-#define bfin_write_RSI_MASK0(val)      bfin_write32(RSI_MASK0, val)
-#define bfin_read_RSI_MASK1()          bfin_read32(RSI_MASK1)
-#define bfin_write_RSI_MASK1(val)      bfin_write32(RSI_MASK1, val)
-#define bfin_read_RSI_FIFO_CNT()       bfin_read16(RSI_FIFO_CNT)
-#define bfin_write_RSI_FIFO_CNT(val)   bfin_write16(RSI_FIFO_CNT, val)
-#define bfin_read_RSI_CEATA_CTL()      bfin_read16(RSI_CEATA_CONTROL)
-#define bfin_write_RSI_CEATA_CTL(val)  bfin_write16(RSI_CEATA_CONTROL, val)
-#define bfin_read_RSI_FIFO()           bfin_read32(RSI_FIFO)
-#define bfin_write_RSI_FIFO(val)       bfin_write32(RSI_FIFO, val)
-#define bfin_read_RSI_E_STATUS()       bfin_read16(RSI_ESTAT)
-#define bfin_write_RSI_E_STATUS(val)   bfin_write16(RSI_ESTAT, val)
-#define bfin_read_RSI_E_MASK()         bfin_read16(RSI_EMASK)
-#define bfin_write_RSI_E_MASK(val)     bfin_write16(RSI_EMASK, val)
-#define bfin_read_RSI_CFG()            bfin_read16(RSI_CONFIG)
-#define bfin_write_RSI_CFG(val)        bfin_write16(RSI_CONFIG, val)
-#define bfin_read_RSI_RD_WAIT_EN()     bfin_read16(RSI_RD_WAIT_EN)
-#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val)
-#define bfin_read_RSI_PID0()           bfin_read16(RSI_PID0)
-#define bfin_write_RSI_PID0(val)       bfin_write16(RSI_PID0, val)
-#define bfin_read_RSI_PID1()           bfin_read16(RSI_PID1)
-#define bfin_write_RSI_PID1(val)       bfin_write16(RSI_PID1, val)
-#define bfin_read_RSI_PID2()           bfin_read16(RSI_PID2)
-#define bfin_write_RSI_PID2(val)       bfin_write16(RSI_PID2, val)
-#define bfin_read_RSI_PID3()           bfin_read16(RSI_PID3)
-#define bfin_write_RSI_PID3(val)       bfin_write16(RSI_PID3, val)
-#define bfin_read_RSI_PID4()           bfin_read16(RSI_PID4)
-#define bfin_write_RSI_PID4(val)       bfin_write16(RSI_PID4, val)
-#define bfin_read_RSI_PID5()           bfin_read16(RSI_PID5)
-#define bfin_write_RSI_PID5(val)       bfin_write16(RSI_PID5, val)
-#define bfin_read_RSI_PID6()           bfin_read16(RSI_PID6)
-#define bfin_write_RSI_PID6(val)       bfin_write16(RSI_PID6, val)
-#define bfin_read_RSI_PID7()           bfin_read16(RSI_PID7)
-#define bfin_write_RSI_PID7(val)       bfin_write16(RSI_PID7, val)
-
-
 #endif /* _CDEF_BF518_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
index 1d970df..e548e9d 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
@@ -131,23 +131,6 @@
 #define bfin_write_UART0_GCTL(val)		bfin_write16(UART0_GCTL, val)
 
 
-/* SPI Controller		(0xFFC00500 - 0xFFC005FF)									*/
-#define bfin_read_SPI_CTL()			bfin_read16(SPI_CTL)
-#define bfin_write_SPI_CTL(val)			bfin_write16(SPI_CTL, val)
-#define bfin_read_SPI_FLG()			bfin_read16(SPI_FLG)
-#define bfin_write_SPI_FLG(val)			bfin_write16(SPI_FLG, val)
-#define bfin_read_SPI_STAT()			bfin_read16(SPI_STAT)
-#define bfin_write_SPI_STAT(val)		bfin_write16(SPI_STAT, val)
-#define bfin_read_SPI_TDBR()			bfin_read16(SPI_TDBR)
-#define bfin_write_SPI_TDBR(val)		bfin_write16(SPI_TDBR, val)
-#define bfin_read_SPI_RDBR()			bfin_read16(SPI_RDBR)
-#define bfin_write_SPI_RDBR(val)		bfin_write16(SPI_RDBR, val)
-#define bfin_read_SPI_BAUD()			bfin_read16(SPI_BAUD)
-#define bfin_write_SPI_BAUD(val)		bfin_write16(SPI_BAUD, val)
-#define bfin_read_SPI_SHADOW()			bfin_read16(SPI_SHADOW)
-#define bfin_write_SPI_SHADOW(val)		bfin_write16(SPI_SHADOW, val)
-
-
 /* TIMER0-7 Registers		(0xFFC00600 - 0xFFC006FF)								*/
 #define bfin_read_TIMER0_CONFIG()		bfin_read16(TIMER0_CONFIG)
 #define bfin_write_TIMER0_CONFIG(val)		bfin_write16(TIMER0_CONFIG, val)
@@ -844,6 +827,7 @@
 #define bfin_write_PPI_CONTROL(val)		bfin_write16(PPI_CONTROL, val)
 #define bfin_read_PPI_STATUS()			bfin_read16(PPI_STATUS)
 #define bfin_write_PPI_STATUS(val)		bfin_write16(PPI_STATUS, val)
+#define bfin_clear_PPI_STATUS()			bfin_write_PPI_STATUS(0xFFFF)
 #define bfin_read_PPI_DELAY()			bfin_read16(PPI_DELAY)
 #define bfin_write_PPI_DELAY(val)		bfin_write16(PPI_DELAY, val)
 #define bfin_read_PPI_COUNT()			bfin_read16(PPI_COUNT)
@@ -1062,17 +1046,6 @@
 #define bfin_read_CNT_MIN()			bfin_read32(CNT_MIN)
 #define bfin_write_CNT_MIN(val)			bfin_write32(CNT_MIN, val)
 
-/* OTP/FUSE Registers */
-
-#define bfin_read_OTP_CONTROL()			bfin_read16(OTP_CONTROL)
-#define bfin_write_OTP_CONTROL(val)		bfin_write16(OTP_CONTROL, val)
-#define bfin_read_OTP_BEN()			bfin_read16(OTP_BEN)
-#define bfin_write_OTP_BEN(val)			bfin_write16(OTP_BEN, val)
-#define bfin_read_OTP_STATUS()			bfin_read16(OTP_STATUS)
-#define bfin_write_OTP_STATUS(val)		bfin_write16(OTP_STATUS, val)
-#define bfin_read_OTP_TIMING()			bfin_read32(OTP_TIMING)
-#define bfin_write_OTP_TIMING(val)		bfin_write32(OTP_TIMING, val)
-
 /* Security Registers */
 
 #define bfin_read_SECURE_SYSSWT()		bfin_read32(SECURE_SYSSWT)
@@ -1082,52 +1055,6 @@
 #define bfin_read_SECURE_STATUS()		bfin_read16(SECURE_STATUS)
 #define bfin_write_SECURE_STATUS(val)		bfin_write16(SECURE_STATUS, val)
 
-/* OTP Read/Write Data Buffer Registers */
-
-#define bfin_read_OTP_DATA0()			bfin_read32(OTP_DATA0)
-#define bfin_write_OTP_DATA0(val)		bfin_write32(OTP_DATA0, val)
-#define bfin_read_OTP_DATA1()			bfin_read32(OTP_DATA1)
-#define bfin_write_OTP_DATA1(val)		bfin_write32(OTP_DATA1, val)
-#define bfin_read_OTP_DATA2()			bfin_read32(OTP_DATA2)
-#define bfin_write_OTP_DATA2(val)		bfin_write32(OTP_DATA2, val)
-#define bfin_read_OTP_DATA3()			bfin_read32(OTP_DATA3)
-#define bfin_write_OTP_DATA3(val)		bfin_write32(OTP_DATA3, val)
-
-/* NFC Registers */
-
-#define bfin_read_NFC_CTL()			bfin_read16(NFC_CTL)
-#define bfin_write_NFC_CTL(val)			bfin_write16(NFC_CTL, val)
-#define bfin_read_NFC_STAT()			bfin_read16(NFC_STAT)
-#define bfin_write_NFC_STAT(val)		bfin_write16(NFC_STAT, val)
-#define bfin_read_NFC_IRQSTAT()			bfin_read16(NFC_IRQSTAT)
-#define bfin_write_NFC_IRQSTAT(val)		bfin_write16(NFC_IRQSTAT, val)
-#define bfin_read_NFC_IRQMASK()			bfin_read16(NFC_IRQMASK)
-#define bfin_write_NFC_IRQMASK(val)		bfin_write16(NFC_IRQMASK, val)
-#define bfin_read_NFC_ECC0()			bfin_read16(NFC_ECC0)
-#define bfin_write_NFC_ECC0(val)		bfin_write16(NFC_ECC0, val)
-#define bfin_read_NFC_ECC1()			bfin_read16(NFC_ECC1)
-#define bfin_write_NFC_ECC1(val)		bfin_write16(NFC_ECC1, val)
-#define bfin_read_NFC_ECC2()			bfin_read16(NFC_ECC2)
-#define bfin_write_NFC_ECC2(val)		bfin_write16(NFC_ECC2, val)
-#define bfin_read_NFC_ECC3()			bfin_read16(NFC_ECC3)
-#define bfin_write_NFC_ECC3(val)		bfin_write16(NFC_ECC3, val)
-#define bfin_read_NFC_COUNT()			bfin_read16(NFC_COUNT)
-#define bfin_write_NFC_COUNT(val)		bfin_write16(NFC_COUNT, val)
-#define bfin_read_NFC_RST()			bfin_read16(NFC_RST)
-#define bfin_write_NFC_RST(val)			bfin_write16(NFC_RST, val)
-#define bfin_read_NFC_PGCTL()			bfin_read16(NFC_PGCTL)
-#define bfin_write_NFC_PGCTL(val)		bfin_write16(NFC_PGCTL, val)
-#define bfin_read_NFC_READ()			bfin_read16(NFC_READ)
-#define bfin_write_NFC_READ(val)		bfin_write16(NFC_READ, val)
-#define bfin_read_NFC_ADDR()			bfin_read16(NFC_ADDR)
-#define bfin_write_NFC_ADDR(val)		bfin_write16(NFC_ADDR, val)
-#define bfin_read_NFC_CMD()			bfin_read16(NFC_CMD)
-#define bfin_write_NFC_CMD(val)			bfin_write16(NFC_CMD, val)
-#define bfin_read_NFC_DATA_WR()			bfin_read16(NFC_DATA_WR)
-#define bfin_write_NFC_DATA_WR(val)		bfin_write16(NFC_DATA_WR, val)
-#define bfin_read_NFC_DATA_RD()			bfin_read16(NFC_DATA_RD)
-#define bfin_write_NFC_DATA_RD(val)		bfin_write16(NFC_DATA_RD, val)
-
 /* These need to be last due to the cdef/linux inter-dependencies */
 #include <asm/irq.h>
 
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h
index b5adca23..92e950d 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h
@@ -7,49 +7,8 @@
 #ifndef _DEF_BF514_H
 #define _DEF_BF514_H
 
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */
-
-/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "defBF51x_base.h"
-
-/* The following are the #defines needed by ADSP-BF514 that are not in the common header */
-
-/* SDH Registers */
-
-#define SDH_PWR_CTL                    0xFFC03900 /* SDH Power Control */
-#define SDH_CLK_CTL                    0xFFC03904 /* SDH Clock Control */
-#define SDH_ARGUMENT                   0xFFC03908 /* SDH Argument */
-#define SDH_COMMAND                    0xFFC0390C /* SDH Command */
-#define SDH_RESP_CMD                   0xFFC03910 /* SDH Response Command */
-#define SDH_RESPONSE0                  0xFFC03914 /* SDH Response0 */
-#define SDH_RESPONSE1                  0xFFC03918 /* SDH Response1 */
-#define SDH_RESPONSE2                  0xFFC0391C /* SDH Response2 */
-#define SDH_RESPONSE3                  0xFFC03920 /* SDH Response3 */
-#define SDH_DATA_TIMER                 0xFFC03924 /* SDH Data Timer */
-#define SDH_DATA_LGTH                  0xFFC03928 /* SDH Data Length */
-#define SDH_DATA_CTL                   0xFFC0392C /* SDH Data Control */
-#define SDH_DATA_CNT                   0xFFC03930 /* SDH Data Counter */
-#define SDH_STATUS                     0xFFC03934 /* SDH Status */
-#define SDH_STATUS_CLR                 0xFFC03938 /* SDH Status Clear */
-#define SDH_MASK0                      0xFFC0393C /* SDH Interrupt0 Mask */
-#define SDH_MASK1                      0xFFC03940 /* SDH Interrupt1 Mask */
-#define SDH_FIFO_CNT                   0xFFC03948 /* SDH FIFO Counter */
-#define SDH_FIFO                       0xFFC03980 /* SDH Data FIFO */
-#define SDH_E_STATUS                   0xFFC039C0 /* SDH Exception Status */
-#define SDH_E_MASK                     0xFFC039C4 /* SDH Exception Mask */
-#define SDH_CFG                        0xFFC039C8 /* SDH Configuration */
-#define SDH_RD_WAIT_EN                 0xFFC039CC /* SDH Read Wait Enable */
-#define SDH_PID0                       0xFFC039D0 /* SDH Peripheral Identification0 */
-#define SDH_PID1                       0xFFC039D4 /* SDH Peripheral Identification1 */
-#define SDH_PID2                       0xFFC039D8 /* SDH Peripheral Identification2 */
-#define SDH_PID3                       0xFFC039DC /* SDH Peripheral Identification3 */
-#define SDH_PID4                       0xFFC039E0 /* SDH Peripheral Identification4 */
-#define SDH_PID5                       0xFFC039E4 /* SDH Peripheral Identification5 */
-#define SDH_PID6                       0xFFC039E8 /* SDH Peripheral Identification6 */
-#define SDH_PID7                       0xFFC039EC /* SDH Peripheral Identification7 */
+/* BF514 is BF512 + RSI */
+#include "defBF512.h"
 
 /* Removable Storage Interface Registers */
 
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF516.h b/arch/blackfin/mach-bf518/include/mach/defBF516.h
index 7eb1877..22a3aa0 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF516.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF516.h
@@ -7,13 +7,8 @@
 #ifndef _DEF_BF516_H
 #define _DEF_BF516_H
 
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */
-
-/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "defBF51x_base.h"
+/* BF516 is BF514 + EMAC */
+#include "defBF514.h"
 
 /* The following are the #defines needed by ADSP-BF516 that are not in the common header */
 /* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
@@ -394,208 +389,4 @@
 #define	TX_GE1024_CNT     0x00200000    /* 1024-Max-Byte TX Frames Sent                           */
 #define	TX_ABORT_CNT      0x00400000    /* TX Frames Aborted                                      */
 
-/* SDH Registers */
-
-#define SDH_PWR_CTL                    0xFFC03900 /* SDH Power Control */
-#define SDH_CLK_CTL                    0xFFC03904 /* SDH Clock Control */
-#define SDH_ARGUMENT                   0xFFC03908 /* SDH Argument */
-#define SDH_COMMAND                    0xFFC0390C /* SDH Command */
-#define SDH_RESP_CMD                   0xFFC03910 /* SDH Response Command */
-#define SDH_RESPONSE0                  0xFFC03914 /* SDH Response0 */
-#define SDH_RESPONSE1                  0xFFC03918 /* SDH Response1 */
-#define SDH_RESPONSE2                  0xFFC0391C /* SDH Response2 */
-#define SDH_RESPONSE3                  0xFFC03920 /* SDH Response3 */
-#define SDH_DATA_TIMER                 0xFFC03924 /* SDH Data Timer */
-#define SDH_DATA_LGTH                  0xFFC03928 /* SDH Data Length */
-#define SDH_DATA_CTL                   0xFFC0392C /* SDH Data Control */
-#define SDH_DATA_CNT                   0xFFC03930 /* SDH Data Counter */
-#define SDH_STATUS                     0xFFC03934 /* SDH Status */
-#define SDH_STATUS_CLR                 0xFFC03938 /* SDH Status Clear */
-#define SDH_MASK0                      0xFFC0393C /* SDH Interrupt0 Mask */
-#define SDH_MASK1                      0xFFC03940 /* SDH Interrupt1 Mask */
-#define SDH_FIFO_CNT                   0xFFC03948 /* SDH FIFO Counter */
-#define SDH_FIFO                       0xFFC03980 /* SDH Data FIFO */
-#define SDH_E_STATUS                   0xFFC039C0 /* SDH Exception Status */
-#define SDH_E_MASK                     0xFFC039C4 /* SDH Exception Mask */
-#define SDH_CFG                        0xFFC039C8 /* SDH Configuration */
-#define SDH_RD_WAIT_EN                 0xFFC039CC /* SDH Read Wait Enable */
-#define SDH_PID0                       0xFFC039D0 /* SDH Peripheral Identification0 */
-#define SDH_PID1                       0xFFC039D4 /* SDH Peripheral Identification1 */
-#define SDH_PID2                       0xFFC039D8 /* SDH Peripheral Identification2 */
-#define SDH_PID3                       0xFFC039DC /* SDH Peripheral Identification3 */
-#define SDH_PID4                       0xFFC039E0 /* SDH Peripheral Identification4 */
-#define SDH_PID5                       0xFFC039E4 /* SDH Peripheral Identification5 */
-#define SDH_PID6                       0xFFC039E8 /* SDH Peripheral Identification6 */
-#define SDH_PID7                       0xFFC039EC /* SDH Peripheral Identification7 */
-
-/* Removable Storage Interface Registers */
-
-#define RSI_PWR_CONTROL                0xFFC03800 /* RSI Power Control Register */
-#define RSI_CLK_CONTROL                0xFFC03804 /* RSI Clock Control Register */
-#define RSI_ARGUMENT                   0xFFC03808 /* RSI Argument Register */
-#define RSI_COMMAND                    0xFFC0380C /* RSI Command Register */
-#define RSI_RESP_CMD                   0xFFC03810 /* RSI Response Command Register */
-#define RSI_RESPONSE0                  0xFFC03814 /* RSI Response Register */
-#define RSI_RESPONSE1                  0xFFC03818 /* RSI Response Register */
-#define RSI_RESPONSE2                  0xFFC0381C /* RSI Response Register */
-#define RSI_RESPONSE3                  0xFFC03820 /* RSI Response Register */
-#define RSI_DATA_TIMER                 0xFFC03824 /* RSI Data Timer Register */
-#define RSI_DATA_LGTH                  0xFFC03828 /* RSI Data Length Register */
-#define RSI_DATA_CONTROL               0xFFC0382C /* RSI Data Control Register */
-#define RSI_DATA_CNT                   0xFFC03830 /* RSI Data Counter Register */
-#define RSI_STATUS                     0xFFC03834 /* RSI Status Register */
-#define RSI_STATUSCL                   0xFFC03838 /* RSI Status Clear Register */
-#define RSI_MASK0                      0xFFC0383C /* RSI Interrupt 0 Mask Register */
-#define RSI_MASK1                      0xFFC03840 /* RSI Interrupt 1 Mask Register */
-#define RSI_FIFO_CNT                   0xFFC03848 /* RSI FIFO Counter Register */
-#define RSI_CEATA_CONTROL              0xFFC0384C /* RSI CEATA Register */
-#define RSI_FIFO                       0xFFC03880 /* RSI Data FIFO Register */
-#define RSI_ESTAT                      0xFFC038C0 /* RSI Exception Status Register */
-#define RSI_EMASK                      0xFFC038C4 /* RSI Exception Mask Register */
-#define RSI_CONFIG                     0xFFC038C8 /* RSI Configuration Register */
-#define RSI_RD_WAIT_EN                 0xFFC038CC /* RSI Read Wait Enable Register */
-#define RSI_PID0                       0xFFC03FE0 /* RSI Peripheral ID Register 0 */
-#define RSI_PID1                       0xFFC03FE4 /* RSI Peripheral ID Register 1 */
-#define RSI_PID2                       0xFFC03FE8 /* RSI Peripheral ID Register 2 */
-#define RSI_PID3                       0xFFC03FEC /* RSI Peripheral ID Register 3 */
-#define RSI_PID4                       0xFFC03FF0 /* RSI Peripheral ID Register 4 */
-#define RSI_PID5                       0xFFC03FF4 /* RSI Peripheral ID Register 5 */
-#define RSI_PID6                       0xFFC03FF8 /* RSI Peripheral ID Register 6 */
-#define RSI_PID7                       0xFFC03FFC /* RSI Peripheral ID Register 7 */
-
-/* ********************************************************** */
-/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
-/*     and MULTI BIT READ MACROS                              */
-/* ********************************************************** */
-
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 #endif /* _DEF_BF516_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF518.h b/arch/blackfin/mach-bf518/include/mach/defBF518.h
index 794cf06e..cb18270 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF518.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF518.h
@@ -7,461 +7,8 @@
 #ifndef _DEF_BF518_H
 #define _DEF_BF518_H
 
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */
-
-/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "defBF51x_base.h"
-
-/* The following are the #defines needed by ADSP-BF518 that are not in the common header */
-/* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
-
-#define EMAC_OPMODE             0xFFC03000       /* Operating Mode Register                              */
-#define EMAC_ADDRLO             0xFFC03004       /* Address Low (32 LSBs) Register                       */
-#define EMAC_ADDRHI             0xFFC03008       /* Address High (16 MSBs) Register                      */
-#define EMAC_HASHLO             0xFFC0300C       /* Multicast Hash Table Low (Bins 31-0) Register        */
-#define EMAC_HASHHI             0xFFC03010       /* Multicast Hash Table High (Bins 63-32) Register      */
-#define EMAC_STAADD             0xFFC03014       /* Station Management Address Register                  */
-#define EMAC_STADAT             0xFFC03018       /* Station Management Data Register                     */
-#define EMAC_FLC                0xFFC0301C       /* Flow Control Register                                */
-#define EMAC_VLAN1              0xFFC03020       /* VLAN1 Tag Register                                   */
-#define EMAC_VLAN2              0xFFC03024       /* VLAN2 Tag Register                                   */
-#define EMAC_WKUP_CTL           0xFFC0302C       /* Wake-Up Control/Status Register                      */
-#define EMAC_WKUP_FFMSK0        0xFFC03030       /* Wake-Up Frame Filter 0 Byte Mask Register            */
-#define EMAC_WKUP_FFMSK1        0xFFC03034       /* Wake-Up Frame Filter 1 Byte Mask Register            */
-#define EMAC_WKUP_FFMSK2        0xFFC03038       /* Wake-Up Frame Filter 2 Byte Mask Register            */
-#define EMAC_WKUP_FFMSK3        0xFFC0303C       /* Wake-Up Frame Filter 3 Byte Mask Register            */
-#define EMAC_WKUP_FFCMD         0xFFC03040       /* Wake-Up Frame Filter Commands Register               */
-#define EMAC_WKUP_FFOFF         0xFFC03044       /* Wake-Up Frame Filter Offsets Register                */
-#define EMAC_WKUP_FFCRC0        0xFFC03048       /* Wake-Up Frame Filter 0,1 CRC-16 Register             */
-#define EMAC_WKUP_FFCRC1        0xFFC0304C       /* Wake-Up Frame Filter 2,3 CRC-16 Register             */
-
-#define EMAC_SYSCTL             0xFFC03060       /* EMAC System Control Register                         */
-#define EMAC_SYSTAT             0xFFC03064       /* EMAC System Status Register                          */
-#define EMAC_RX_STAT            0xFFC03068       /* RX Current Frame Status Register                     */
-#define EMAC_RX_STKY            0xFFC0306C       /* RX Sticky Frame Status Register                      */
-#define EMAC_RX_IRQE            0xFFC03070       /* RX Frame Status Interrupt Enables Register           */
-#define EMAC_TX_STAT            0xFFC03074       /* TX Current Frame Status Register                     */
-#define EMAC_TX_STKY            0xFFC03078       /* TX Sticky Frame Status Register                      */
-#define EMAC_TX_IRQE            0xFFC0307C       /* TX Frame Status Interrupt Enables Register           */
-
-#define EMAC_MMC_CTL            0xFFC03080       /* MMC Counter Control Register                         */
-#define EMAC_MMC_RIRQS          0xFFC03084       /* MMC RX Interrupt Status Register                     */
-#define EMAC_MMC_RIRQE          0xFFC03088       /* MMC RX Interrupt Enables Register                    */
-#define EMAC_MMC_TIRQS          0xFFC0308C       /* MMC TX Interrupt Status Register                     */
-#define EMAC_MMC_TIRQE          0xFFC03090       /* MMC TX Interrupt Enables Register                    */
-
-#define EMAC_RXC_OK             0xFFC03100       /* RX Frame Successful Count                            */
-#define EMAC_RXC_FCS            0xFFC03104       /* RX Frame FCS Failure Count                           */
-#define EMAC_RXC_ALIGN          0xFFC03108       /* RX Alignment Error Count                             */
-#define EMAC_RXC_OCTET          0xFFC0310C       /* RX Octets Successfully Received Count                */
-#define EMAC_RXC_DMAOVF         0xFFC03110       /* Internal MAC Sublayer Error RX Frame Count           */
-#define EMAC_RXC_UNICST         0xFFC03114       /* Unicast RX Frame Count                               */
-#define EMAC_RXC_MULTI          0xFFC03118       /* Multicast RX Frame Count                             */
-#define EMAC_RXC_BROAD          0xFFC0311C       /* Broadcast RX Frame Count                             */
-#define EMAC_RXC_LNERRI         0xFFC03120       /* RX Frame In Range Error Count                        */
-#define EMAC_RXC_LNERRO         0xFFC03124       /* RX Frame Out Of Range Error Count                    */
-#define EMAC_RXC_LONG           0xFFC03128       /* RX Frame Too Long Count                              */
-#define EMAC_RXC_MACCTL         0xFFC0312C       /* MAC Control RX Frame Count                           */
-#define EMAC_RXC_OPCODE         0xFFC03130       /* Unsupported Op-Code RX Frame Count                   */
-#define EMAC_RXC_PAUSE          0xFFC03134       /* MAC Control Pause RX Frame Count                     */
-#define EMAC_RXC_ALLFRM         0xFFC03138       /* Overall RX Frame Count                               */
-#define EMAC_RXC_ALLOCT         0xFFC0313C       /* Overall RX Octet Count                               */
-#define EMAC_RXC_TYPED          0xFFC03140       /* Type/Length Consistent RX Frame Count                */
-#define EMAC_RXC_SHORT          0xFFC03144       /* RX Frame Fragment Count - Byte Count x < 64          */
-#define EMAC_RXC_EQ64           0xFFC03148       /* Good RX Frame Count - Byte Count x = 64              */
-#define EMAC_RXC_LT128          0xFFC0314C       /* Good RX Frame Count - Byte Count  64 < x < 128       */
-#define EMAC_RXC_LT256          0xFFC03150       /* Good RX Frame Count - Byte Count 128 <= x < 256      */
-#define EMAC_RXC_LT512          0xFFC03154       /* Good RX Frame Count - Byte Count 256 <= x < 512      */
-#define EMAC_RXC_LT1024         0xFFC03158       /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
-#define EMAC_RXC_GE1024         0xFFC0315C       /* Good RX Frame Count - Byte Count x >= 1024           */
-
-#define EMAC_TXC_OK             0xFFC03180       /* TX Frame Successful Count                             */
-#define EMAC_TXC_1COL           0xFFC03184       /* TX Frames Successful After Single Collision Count     */
-#define EMAC_TXC_GT1COL         0xFFC03188       /* TX Frames Successful After Multiple Collisions Count  */
-#define EMAC_TXC_OCTET          0xFFC0318C       /* TX Octets Successfully Received Count                 */
-#define EMAC_TXC_DEFER          0xFFC03190       /* TX Frame Delayed Due To Busy Count                    */
-#define EMAC_TXC_LATECL         0xFFC03194       /* Late TX Collisions Count                              */
-#define EMAC_TXC_XS_COL         0xFFC03198       /* TX Frame Failed Due To Excessive Collisions Count     */
-#define EMAC_TXC_DMAUND         0xFFC0319C       /* Internal MAC Sublayer Error TX Frame Count            */
-#define EMAC_TXC_CRSERR         0xFFC031A0       /* Carrier Sense Deasserted During TX Frame Count        */
-#define EMAC_TXC_UNICST         0xFFC031A4       /* Unicast TX Frame Count                                */
-#define EMAC_TXC_MULTI          0xFFC031A8       /* Multicast TX Frame Count                              */
-#define EMAC_TXC_BROAD          0xFFC031AC       /* Broadcast TX Frame Count                              */
-#define EMAC_TXC_XS_DFR         0xFFC031B0       /* TX Frames With Excessive Deferral Count               */
-#define EMAC_TXC_MACCTL         0xFFC031B4       /* MAC Control TX Frame Count                            */
-#define EMAC_TXC_ALLFRM         0xFFC031B8       /* Overall TX Frame Count                                */
-#define EMAC_TXC_ALLOCT         0xFFC031BC       /* Overall TX Octet Count                                */
-#define EMAC_TXC_EQ64           0xFFC031C0       /* Good TX Frame Count - Byte Count x = 64               */
-#define EMAC_TXC_LT128          0xFFC031C4       /* Good TX Frame Count - Byte Count  64 < x < 128        */
-#define EMAC_TXC_LT256          0xFFC031C8       /* Good TX Frame Count - Byte Count 128 <= x < 256       */
-#define EMAC_TXC_LT512          0xFFC031CC       /* Good TX Frame Count - Byte Count 256 <= x < 512       */
-#define EMAC_TXC_LT1024         0xFFC031D0       /* Good TX Frame Count - Byte Count 512 <= x < 1024      */
-#define EMAC_TXC_GE1024         0xFFC031D4       /* Good TX Frame Count - Byte Count x >= 1024            */
-#define EMAC_TXC_ABORT          0xFFC031D8       /* Total TX Frames Aborted Count                         */
-
-/* Listing for IEEE-Supported Count Registers */
-
-#define FramesReceivedOK                EMAC_RXC_OK        /* RX Frame Successful Count                            */
-#define FrameCheckSequenceErrors        EMAC_RXC_FCS       /* RX Frame FCS Failure Count                           */
-#define AlignmentErrors                 EMAC_RXC_ALIGN     /* RX Alignment Error Count                             */
-#define OctetsReceivedOK                EMAC_RXC_OCTET     /* RX Octets Successfully Received Count                */
-#define FramesLostDueToIntMACRcvError   EMAC_RXC_DMAOVF    /* Internal MAC Sublayer Error RX Frame Count           */
-#define UnicastFramesReceivedOK         EMAC_RXC_UNICST    /* Unicast RX Frame Count                               */
-#define MulticastFramesReceivedOK       EMAC_RXC_MULTI     /* Multicast RX Frame Count                             */
-#define BroadcastFramesReceivedOK       EMAC_RXC_BROAD     /* Broadcast RX Frame Count                             */
-#define InRangeLengthErrors             EMAC_RXC_LNERRI    /* RX Frame In Range Error Count                        */
-#define OutOfRangeLengthField           EMAC_RXC_LNERRO    /* RX Frame Out Of Range Error Count                    */
-#define FrameTooLongErrors              EMAC_RXC_LONG      /* RX Frame Too Long Count                              */
-#define MACControlFramesReceived        EMAC_RXC_MACCTL    /* MAC Control RX Frame Count                           */
-#define UnsupportedOpcodesReceived      EMAC_RXC_OPCODE    /* Unsupported Op-Code RX Frame Count                   */
-#define PAUSEMACCtrlFramesReceived      EMAC_RXC_PAUSE     /* MAC Control Pause RX Frame Count                     */
-#define FramesReceivedAll               EMAC_RXC_ALLFRM    /* Overall RX Frame Count                               */
-#define OctetsReceivedAll               EMAC_RXC_ALLOCT    /* Overall RX Octet Count                               */
-#define TypedFramesReceived             EMAC_RXC_TYPED     /* Type/Length Consistent RX Frame Count                */
-#define FramesLenLt64Received           EMAC_RXC_SHORT     /* RX Frame Fragment Count - Byte Count x < 64          */
-#define FramesLenEq64Received           EMAC_RXC_EQ64      /* Good RX Frame Count - Byte Count x = 64              */
-#define FramesLen65_127Received         EMAC_RXC_LT128     /* Good RX Frame Count - Byte Count  64 < x < 128       */
-#define FramesLen128_255Received        EMAC_RXC_LT256     /* Good RX Frame Count - Byte Count 128 <= x < 256      */
-#define FramesLen256_511Received        EMAC_RXC_LT512     /* Good RX Frame Count - Byte Count 256 <= x < 512      */
-#define FramesLen512_1023Received       EMAC_RXC_LT1024    /* Good RX Frame Count - Byte Count 512 <= x < 1024     */
-#define FramesLen1024_MaxReceived       EMAC_RXC_GE1024    /* Good RX Frame Count - Byte Count x >= 1024           */
-
-#define FramesTransmittedOK             EMAC_TXC_OK        /* TX Frame Successful Count                            */
-#define SingleCollisionFrames           EMAC_TXC_1COL      /* TX Frames Successful After Single Collision Count    */
-#define MultipleCollisionFrames         EMAC_TXC_GT1COL    /* TX Frames Successful After Multiple Collisions Count */
-#define OctetsTransmittedOK             EMAC_TXC_OCTET     /* TX Octets Successfully Received Count                */
-#define FramesWithDeferredXmissions     EMAC_TXC_DEFER     /* TX Frame Delayed Due To Busy Count                   */
-#define LateCollisions                  EMAC_TXC_LATECL    /* Late TX Collisions Count                             */
-#define FramesAbortedDueToXSColls       EMAC_TXC_XS_COL    /* TX Frame Failed Due To Excessive Collisions Count    */
-#define FramesLostDueToIntMacXmitError  EMAC_TXC_DMAUND    /* Internal MAC Sublayer Error TX Frame Count           */
-#define CarrierSenseErrors              EMAC_TXC_CRSERR    /* Carrier Sense Deasserted During TX Frame Count       */
-#define UnicastFramesXmittedOK          EMAC_TXC_UNICST    /* Unicast TX Frame Count                               */
-#define MulticastFramesXmittedOK        EMAC_TXC_MULTI     /* Multicast TX Frame Count                             */
-#define BroadcastFramesXmittedOK        EMAC_TXC_BROAD     /* Broadcast TX Frame Count                             */
-#define FramesWithExcessiveDeferral     EMAC_TXC_XS_DFR    /* TX Frames With Excessive Deferral Count              */
-#define MACControlFramesTransmitted     EMAC_TXC_MACCTL    /* MAC Control TX Frame Count                           */
-#define FramesTransmittedAll            EMAC_TXC_ALLFRM    /* Overall TX Frame Count                               */
-#define OctetsTransmittedAll            EMAC_TXC_ALLOCT    /* Overall TX Octet Count                               */
-#define FramesLenEq64Transmitted        EMAC_TXC_EQ64      /* Good TX Frame Count - Byte Count x = 64              */
-#define FramesLen65_127Transmitted      EMAC_TXC_LT128     /* Good TX Frame Count - Byte Count  64 < x < 128       */
-#define FramesLen128_255Transmitted     EMAC_TXC_LT256     /* Good TX Frame Count - Byte Count 128 <= x < 256      */
-#define FramesLen256_511Transmitted     EMAC_TXC_LT512     /* Good TX Frame Count - Byte Count 256 <= x < 512      */
-#define FramesLen512_1023Transmitted    EMAC_TXC_LT1024    /* Good TX Frame Count - Byte Count 512 <= x < 1024     */
-#define FramesLen1024_MaxTransmitted    EMAC_TXC_GE1024    /* Good TX Frame Count - Byte Count x >= 1024           */
-#define TxAbortedFrames                 EMAC_TXC_ABORT     /* Total TX Frames Aborted Count                        */
-
-/***********************************************************************************
-** System MMR Register Bits And Macros
-**
-** Disclaimer:	All macros are intended to make C and Assembly code more readable.
-**				Use these macros carefully, as any that do left shifts for field
-**				depositing will result in the lower order bits being destroyed.  Any
-**				macro that shifts left to properly position the bit-field should be
-**				used as part of an OR to initialize a register and NOT as a dynamic
-**				modifier UNLESS the lower order bits are saved and ORed back in when
-**				the macro is used.
-*************************************************************************************/
-
-/************************  ETHERNET 10/100 CONTROLLER MASKS  ************************/
-
-/* EMAC_OPMODE Masks */
-
-#define	RE                 0x00000001     /* Receiver Enable                                    */
-#define	ASTP               0x00000002     /* Enable Automatic Pad Stripping On RX Frames        */
-#define	HU                 0x00000010     /* Hash Filter Unicast Address                        */
-#define	HM                 0x00000020     /* Hash Filter Multicast Address                      */
-#define	PAM                0x00000040     /* Pass-All-Multicast Mode Enable                     */
-#define	PR                 0x00000080     /* Promiscuous Mode Enable                            */
-#define	IFE                0x00000100     /* Inverse Filtering Enable                           */
-#define	DBF                0x00000200     /* Disable Broadcast Frame Reception                  */
-#define	PBF                0x00000400     /* Pass Bad Frames Enable                             */
-#define	PSF                0x00000800     /* Pass Short Frames Enable                           */
-#define	RAF                0x00001000     /* Receive-All Mode                                   */
-#define	TE                 0x00010000     /* Transmitter Enable                                 */
-#define	DTXPAD             0x00020000     /* Disable Automatic TX Padding                       */
-#define	DTXCRC             0x00040000     /* Disable Automatic TX CRC Generation                */
-#define	DC                 0x00080000     /* Deferral Check                                     */
-#define	BOLMT              0x00300000     /* Back-Off Limit                                     */
-#define	BOLMT_10           0x00000000     /*		10-bit range                            */
-#define	BOLMT_8            0x00100000     /*		8-bit range                             */
-#define	BOLMT_4            0x00200000     /*		4-bit range                             */
-#define	BOLMT_1            0x00300000     /*		1-bit range                             */
-#define	DRTY               0x00400000     /* Disable TX Retry On Collision                      */
-#define	LCTRE              0x00800000     /* Enable TX Retry On Late Collision                  */
-#define	RMII               0x01000000     /* RMII/MII* Mode                                     */
-#define	RMII_10            0x02000000     /* Speed Select for RMII Port (10MBit/100MBit*)       */
-#define	FDMODE             0x04000000     /* Duplex Mode Enable (Full/Half*)                    */
-#define	LB                 0x08000000     /* Internal Loopback Enable                           */
-#define	DRO                0x10000000     /* Disable Receive Own Frames (Half-Duplex Mode)      */
-
-/* EMAC_STAADD Masks */
-
-#define	STABUSY            0x00000001     /* Initiate Station Mgt Reg Access / STA Busy Stat    */
-#define	STAOP              0x00000002     /* Station Management Operation Code (Write/Read*)    */
-#define	STADISPRE          0x00000004     /* Disable Preamble Generation                        */
-#define	STAIE              0x00000008     /* Station Mgt. Transfer Done Interrupt Enable        */
-#define	REGAD              0x000007C0     /* STA Register Address                               */
-#define	PHYAD              0x0000F800     /* PHY Device Address                                 */
-
-#define	SET_REGAD(x) (((x)&0x1F)<<  6 )   /* Set STA Register Address                           */
-#define	SET_PHYAD(x) (((x)&0x1F)<< 11 )   /* Set PHY Device Address                             */
-
-/* EMAC_STADAT Mask */
-
-#define	STADATA            0x0000FFFF     /* Station Management Data                            */
-
-/* EMAC_FLC Masks */
-
-#define	FLCBUSY            0x00000001     /* Send Flow Ctrl Frame / Flow Ctrl Busy Status       */
-#define	FLCE               0x00000002     /* Flow Control Enable                                */
-#define	PCF                0x00000004     /* Pass Control Frames                                */
-#define	BKPRSEN            0x00000008     /* Enable Backpressure                                */
-#define	FLCPAUSE           0xFFFF0000     /* Pause Time                                         */
-
-#define	SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time                                   */
-
-/* EMAC_WKUP_CTL Masks */
-
-#define	CAPWKFRM           0x00000001    /* Capture Wake-Up Frames                              */
-#define	MPKE               0x00000002    /* Magic Packet Enable                                 */
-#define	RWKE               0x00000004    /* Remote Wake-Up Frame Enable                         */
-#define	GUWKE              0x00000008    /* Global Unicast Wake Enable                          */
-#define	MPKS               0x00000020    /* Magic Packet Received Status                        */
-#define	RWKS               0x00000F00    /* Wake-Up Frame Received Status, Filters 3:0          */
-
-/* EMAC_WKUP_FFCMD Masks */
-
-#define	WF0_E              0x00000001    /* Enable Wake-Up Filter 0                              */
-#define	WF0_T              0x00000008    /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*)      */
-#define	WF1_E              0x00000100    /* Enable Wake-Up Filter 1                              */
-#define	WF1_T              0x00000800    /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*)      */
-#define	WF2_E              0x00010000    /* Enable Wake-Up Filter 2                              */
-#define	WF2_T              0x00080000    /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*)      */
-#define	WF3_E              0x01000000    /* Enable Wake-Up Filter 3                              */
-#define	WF3_T              0x08000000    /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*)      */
-
-/* EMAC_WKUP_FFOFF Masks */
-
-#define	WF0_OFF            0x000000FF    /* Wake-Up Filter 0 Pattern Offset                      */
-#define	WF1_OFF            0x0000FF00    /* Wake-Up Filter 1 Pattern Offset                      */
-#define	WF2_OFF            0x00FF0000    /* Wake-Up Filter 2 Pattern Offset                      */
-#define	WF3_OFF            0xFF000000    /* Wake-Up Filter 3 Pattern Offset                      */
-
-#define	SET_WF0_OFF(x) (((x)&0xFF)<<  0 ) /* Set Wake-Up Filter 0 Byte Offset                    */
-#define	SET_WF1_OFF(x) (((x)&0xFF)<<  8 ) /* Set Wake-Up Filter 1 Byte Offset                    */
-#define	SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset                    */
-#define	SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset                    */
-/* Set ALL Offsets */
-#define	SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
-
-/* EMAC_WKUP_FFCRC0 Masks */
-
-#define	WF0_CRC           0x0000FFFF    /* Wake-Up Filter 0 Pattern CRC                           */
-#define	WF1_CRC           0xFFFF0000    /* Wake-Up Filter 1 Pattern CRC                           */
-
-#define	SET_WF0_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 0 Target CRC                   */
-#define	SET_WF1_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 1 Target CRC                   */
-
-/* EMAC_WKUP_FFCRC1 Masks */
-
-#define	WF2_CRC           0x0000FFFF    /* Wake-Up Filter 2 Pattern CRC                           */
-#define	WF3_CRC           0xFFFF0000    /* Wake-Up Filter 3 Pattern CRC                           */
-
-#define	SET_WF2_CRC(x) (((x)&0xFFFF)<<   0 ) /* Set Wake-Up Filter 2 Target CRC                   */
-#define	SET_WF3_CRC(x) (((x)&0xFFFF)<<  16 ) /* Set Wake-Up Filter 3 Target CRC                   */
-
-/* EMAC_SYSCTL Masks */
-
-#define	PHYIE             0x00000001    /* PHY_INT Interrupt Enable                               */
-#define	RXDWA             0x00000002    /* Receive Frame DMA Word Alignment (Odd/Even*)           */
-#define	RXCKS             0x00000004    /* Enable RX Frame TCP/UDP Checksum Computation           */
-#define	TXDWA             0x00000010    /* Transmit Frame DMA Word Alignment (Odd/Even*)          */
-#define	MDCDIV            0x00003F00    /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))]            */
-
-#define	SET_MDCDIV(x) (((x)&0x3F)<< 8)   /* Set MDC Clock Divisor                                 */
-
-/* EMAC_SYSTAT Masks */
-
-#define	PHYINT            0x00000001    /* PHY_INT Interrupt Status                               */
-#define	MMCINT            0x00000002    /* MMC Counter Interrupt Status                           */
-#define	RXFSINT           0x00000004    /* RX Frame-Status Interrupt Status                       */
-#define	TXFSINT           0x00000008    /* TX Frame-Status Interrupt Status                       */
-#define	WAKEDET           0x00000010    /* Wake-Up Detected Status                                */
-#define	RXDMAERR          0x00000020    /* RX DMA Direction Error Status                          */
-#define	TXDMAERR          0x00000040    /* TX DMA Direction Error Status                          */
-#define	STMDONE           0x00000080    /* Station Mgt. Transfer Done Interrupt Status            */
-
-/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
-
-#define	RX_FRLEN          0x000007FF    /* Frame Length In Bytes                                  */
-#define	RX_COMP           0x00001000    /* RX Frame Complete                                      */
-#define	RX_OK             0x00002000    /* RX Frame Received With No Errors                       */
-#define	RX_LONG           0x00004000    /* RX Frame Too Long Error                                */
-#define	RX_ALIGN          0x00008000    /* RX Frame Alignment Error                               */
-#define	RX_CRC            0x00010000    /* RX Frame CRC Error                                     */
-#define	RX_LEN            0x00020000    /* RX Frame Length Error                                  */
-#define	RX_FRAG           0x00040000    /* RX Frame Fragment Error                                */
-#define	RX_ADDR           0x00080000    /* RX Frame Address Filter Failed Error                   */
-#define	RX_DMAO           0x00100000    /* RX Frame DMA Overrun Error                             */
-#define	RX_PHY            0x00200000    /* RX Frame PHY Error                                     */
-#define	RX_LATE           0x00400000    /* RX Frame Late Collision Error                          */
-#define	RX_RANGE          0x00800000    /* RX Frame Length Field Out of Range Error               */
-#define	RX_MULTI          0x01000000    /* RX Multicast Frame Indicator                           */
-#define	RX_BROAD          0x02000000    /* RX Broadcast Frame Indicator                           */
-#define	RX_CTL            0x04000000    /* RX Control Frame Indicator                             */
-#define	RX_UCTL           0x08000000    /* Unsupported RX Control Frame Indicator                 */
-#define	RX_TYPE           0x10000000    /* RX Typed Frame Indicator                               */
-#define	RX_VLAN1          0x20000000    /* RX VLAN1 Frame Indicator                               */
-#define	RX_VLAN2          0x40000000    /* RX VLAN2 Frame Indicator                               */
-#define	RX_ACCEPT         0x80000000    /* RX Frame Accepted Indicator                            */
-
-/*  EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks  */
-
-#define	TX_COMP           0x00000001    /* TX Frame Complete                                      */
-#define	TX_OK             0x00000002    /* TX Frame Sent With No Errors                           */
-#define	TX_ECOLL          0x00000004    /* TX Frame Excessive Collision Error                     */
-#define	TX_LATE           0x00000008    /* TX Frame Late Collision Error                          */
-#define	TX_DMAU           0x00000010    /* TX Frame DMA Underrun Error (STAT)                     */
-#define	TX_MACE           0x00000010    /* Internal MAC Error Detected (STKY and IRQE)            */
-#define	TX_EDEFER         0x00000020    /* TX Frame Excessive Deferral Error                      */
-#define	TX_BROAD          0x00000040    /* TX Broadcast Frame Indicator                           */
-#define	TX_MULTI          0x00000080    /* TX Multicast Frame Indicator                           */
-#define	TX_CCNT           0x00000F00    /* TX Frame Collision Count                               */
-#define	TX_DEFER          0x00001000    /* TX Frame Deferred Indicator                            */
-#define	TX_CRS            0x00002000    /* TX Frame Carrier Sense Not Asserted Error              */
-#define	TX_LOSS           0x00004000    /* TX Frame Carrier Lost During TX Error                  */
-#define	TX_RETRY          0x00008000    /* TX Frame Successful After Retry                        */
-#define	TX_FRLEN          0x07FF0000    /* TX Frame Length (Bytes)                                */
-
-/* EMAC_MMC_CTL Masks */
-#define	RSTC              0x00000001    /* Reset All Counters                                     */
-#define	CROLL             0x00000002    /* Counter Roll-Over Enable                               */
-#define	CCOR              0x00000004    /* Counter Clear-On-Read Mode Enable                      */
-#define	MMCE              0x00000008    /* Enable MMC Counter Operation                           */
-
-/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
-#define	RX_OK_CNT         0x00000001    /* RX Frames Received With No Errors                      */
-#define	RX_FCS_CNT        0x00000002    /* RX Frames W/Frame Check Sequence Errors                */
-#define	RX_ALIGN_CNT      0x00000004    /* RX Frames With Alignment Errors                        */
-#define	RX_OCTET_CNT      0x00000008    /* RX Octets Received OK                                  */
-#define	RX_LOST_CNT       0x00000010    /* RX Frames Lost Due To Internal MAC RX Error            */
-#define	RX_UNI_CNT        0x00000020    /* Unicast RX Frames Received OK                          */
-#define	RX_MULTI_CNT      0x00000040    /* Multicast RX Frames Received OK                        */
-#define	RX_BROAD_CNT      0x00000080    /* Broadcast RX Frames Received OK                        */
-#define	RX_IRL_CNT        0x00000100    /* RX Frames With In-Range Length Errors                  */
-#define	RX_ORL_CNT        0x00000200    /* RX Frames With Out-Of-Range Length Errors              */
-#define	RX_LONG_CNT       0x00000400    /* RX Frames With Frame Too Long Errors                   */
-#define	RX_MACCTL_CNT     0x00000800    /* MAC Control RX Frames Received                         */
-#define	RX_OPCODE_CTL     0x00001000    /* Unsupported Op-Code RX Frames Received                 */
-#define	RX_PAUSE_CNT      0x00002000    /* PAUSEMAC Control RX Frames Received                    */
-#define	RX_ALLF_CNT       0x00004000    /* All RX Frames Received                                 */
-#define	RX_ALLO_CNT       0x00008000    /* All RX Octets Received                                 */
-#define	RX_TYPED_CNT      0x00010000    /* Typed RX Frames Received                               */
-#define	RX_SHORT_CNT      0x00020000    /* RX Frame Fragments (< 64 Bytes) Received               */
-#define	RX_EQ64_CNT       0x00040000    /* 64-Byte RX Frames Received                             */
-#define	RX_LT128_CNT      0x00080000    /* 65-127-Byte RX Frames Received                         */
-#define	RX_LT256_CNT      0x00100000    /* 128-255-Byte RX Frames Received                        */
-#define	RX_LT512_CNT      0x00200000    /* 256-511-Byte RX Frames Received                        */
-#define	RX_LT1024_CNT     0x00400000    /* 512-1023-Byte RX Frames Received                       */
-#define	RX_GE1024_CNT     0x00800000    /* 1024-Max-Byte RX Frames Received                       */
-
-/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks  */
-
-#define	TX_OK_CNT         0x00000001    /* TX Frames Sent OK                                      */
-#define	TX_SCOLL_CNT      0x00000002    /* TX Frames With Single Collisions                       */
-#define	TX_MCOLL_CNT      0x00000004    /* TX Frames With Multiple Collisions                     */
-#define	TX_OCTET_CNT      0x00000008    /* TX Octets Sent OK                                      */
-#define	TX_DEFER_CNT      0x00000010    /* TX Frames With Deferred Transmission                   */
-#define	TX_LATE_CNT       0x00000020    /* TX Frames With Late Collisions                         */
-#define	TX_ABORTC_CNT     0x00000040    /* TX Frames Aborted Due To Excess Collisions             */
-#define	TX_LOST_CNT       0x00000080    /* TX Frames Lost Due To Internal MAC TX Error            */
-#define	TX_CRS_CNT        0x00000100    /* TX Frames With Carrier Sense Errors                    */
-#define	TX_UNI_CNT        0x00000200    /* Unicast TX Frames Sent                                 */
-#define	TX_MULTI_CNT      0x00000400    /* Multicast TX Frames Sent                               */
-#define	TX_BROAD_CNT      0x00000800    /* Broadcast TX Frames Sent                               */
-#define	TX_EXDEF_CTL      0x00001000    /* TX Frames With Excessive Deferral                      */
-#define	TX_MACCTL_CNT     0x00002000    /* MAC Control TX Frames Sent                             */
-#define	TX_ALLF_CNT       0x00004000    /* All TX Frames Sent                                     */
-#define	TX_ALLO_CNT       0x00008000    /* All TX Octets Sent                                     */
-#define	TX_EQ64_CNT       0x00010000    /* 64-Byte TX Frames Sent                                 */
-#define	TX_LT128_CNT      0x00020000    /* 65-127-Byte TX Frames Sent                             */
-#define	TX_LT256_CNT      0x00040000    /* 128-255-Byte TX Frames Sent                            */
-#define	TX_LT512_CNT      0x00080000    /* 256-511-Byte TX Frames Sent                            */
-#define	TX_LT1024_CNT     0x00100000    /* 512-1023-Byte TX Frames Sent                           */
-#define	TX_GE1024_CNT     0x00200000    /* 1024-Max-Byte TX Frames Sent                           */
-#define	TX_ABORT_CNT      0x00400000    /* TX Frames Aborted                                      */
-
-/* SDH Registers */
-
-#define SDH_PWR_CTL                    0xFFC03900 /* SDH Power Control */
-#define SDH_CLK_CTL                    0xFFC03904 /* SDH Clock Control */
-#define SDH_ARGUMENT                   0xFFC03908 /* SDH Argument */
-#define SDH_COMMAND                    0xFFC0390C /* SDH Command */
-#define SDH_RESP_CMD                   0xFFC03910 /* SDH Response Command */
-#define SDH_RESPONSE0                  0xFFC03914 /* SDH Response0 */
-#define SDH_RESPONSE1                  0xFFC03918 /* SDH Response1 */
-#define SDH_RESPONSE2                  0xFFC0391C /* SDH Response2 */
-#define SDH_RESPONSE3                  0xFFC03920 /* SDH Response3 */
-#define SDH_DATA_TIMER                 0xFFC03924 /* SDH Data Timer */
-#define SDH_DATA_LGTH                  0xFFC03928 /* SDH Data Length */
-#define SDH_DATA_CTL                   0xFFC0392C /* SDH Data Control */
-#define SDH_DATA_CNT                   0xFFC03930 /* SDH Data Counter */
-#define SDH_STATUS                     0xFFC03934 /* SDH Status */
-#define SDH_STATUS_CLR                 0xFFC03938 /* SDH Status Clear */
-#define SDH_MASK0                      0xFFC0393C /* SDH Interrupt0 Mask */
-#define SDH_MASK1                      0xFFC03940 /* SDH Interrupt1 Mask */
-#define SDH_FIFO_CNT                   0xFFC03948 /* SDH FIFO Counter */
-#define SDH_FIFO                       0xFFC03980 /* SDH Data FIFO */
-#define SDH_E_STATUS                   0xFFC039C0 /* SDH Exception Status */
-#define SDH_E_MASK                     0xFFC039C4 /* SDH Exception Mask */
-#define SDH_CFG                        0xFFC039C8 /* SDH Configuration */
-#define SDH_RD_WAIT_EN                 0xFFC039CC /* SDH Read Wait Enable */
-#define SDH_PID0                       0xFFC039D0 /* SDH Peripheral Identification0 */
-#define SDH_PID1                       0xFFC039D4 /* SDH Peripheral Identification1 */
-#define SDH_PID2                       0xFFC039D8 /* SDH Peripheral Identification2 */
-#define SDH_PID3                       0xFFC039DC /* SDH Peripheral Identification3 */
-#define SDH_PID4                       0xFFC039E0 /* SDH Peripheral Identification4 */
-#define SDH_PID5                       0xFFC039E4 /* SDH Peripheral Identification5 */
-#define SDH_PID6                       0xFFC039E8 /* SDH Peripheral Identification6 */
-#define SDH_PID7                       0xFFC039EC /* SDH Peripheral Identification7 */
-
-/* Removable Storage Interface Registers */
-
-#define RSI_PWR_CONTROL                0xFFC03800 /* RSI Power Control Register */
-#define RSI_CLK_CONTROL                0xFFC03804 /* RSI Clock Control Register */
-#define RSI_ARGUMENT                   0xFFC03808 /* RSI Argument Register */
-#define RSI_COMMAND                    0xFFC0380C /* RSI Command Register */
-#define RSI_RESP_CMD                   0xFFC03810 /* RSI Response Command Register */
-#define RSI_RESPONSE0                  0xFFC03814 /* RSI Response Register */
-#define RSI_RESPONSE1                  0xFFC03818 /* RSI Response Register */
-#define RSI_RESPONSE2                  0xFFC0381C /* RSI Response Register */
-#define RSI_RESPONSE3                  0xFFC03820 /* RSI Response Register */
-#define RSI_DATA_TIMER                 0xFFC03824 /* RSI Data Timer Register */
-#define RSI_DATA_LGTH                  0xFFC03828 /* RSI Data Length Register */
-#define RSI_DATA_CONTROL               0xFFC0382C /* RSI Data Control Register */
-#define RSI_DATA_CNT                   0xFFC03830 /* RSI Data Counter Register */
-#define RSI_STATUS                     0xFFC03834 /* RSI Status Register */
-#define RSI_STATUSCL                   0xFFC03838 /* RSI Status Clear Register */
-#define RSI_MASK0                      0xFFC0383C /* RSI Interrupt 0 Mask Register */
-#define RSI_MASK1                      0xFFC03840 /* RSI Interrupt 1 Mask Register */
-#define RSI_FIFO_CNT                   0xFFC03848 /* RSI FIFO Counter Register */
-#define RSI_CEATA_CONTROL              0xFFC0384C /* RSI CEATA Register */
-#define RSI_FIFO                       0xFFC03880 /* RSI Data FIFO Register */
-#define RSI_ESTAT                      0xFFC038C0 /* RSI Exception Status Register */
-#define RSI_EMASK                      0xFFC038C4 /* RSI Exception Mask Register */
-#define RSI_CONFIG                     0xFFC038C8 /* RSI Configuration Register */
-#define RSI_RD_WAIT_EN                 0xFFC038CC /* RSI Read Wait Enable Register */
-#define RSI_PID0                       0xFFC03FE0 /* RSI Peripheral ID Register 0 */
-#define RSI_PID1                       0xFFC03FE4 /* RSI Peripheral ID Register 1 */
-#define RSI_PID2                       0xFFC03FE8 /* RSI Peripheral ID Register 2 */
-#define RSI_PID3                       0xFFC03FEC /* RSI Peripheral ID Register 3 */
-#define RSI_PID4                       0xFFC03FF0 /* RSI Peripheral ID Register 4 */
-#define RSI_PID5                       0xFFC03FF4 /* RSI Peripheral ID Register 5 */
-#define RSI_PID6                       0xFFC03FF8 /* RSI Peripheral ID Register 6 */
-#define RSI_PID7                       0xFFC03FFC /* RSI Peripheral ID Register 7 */
+/* BF518 is BF516 + IEEE-1588 */
+#include "defBF516.h"
 
 /* PTP TSYNC Registers */
 
@@ -489,141 +36,6 @@
 #define EMAC_PTP_PPS_STARTHI           0xFFC030F4 /* PPS Start Time High */
 #define EMAC_PTP_PPS_PERIOD            0xFFC030F8 /* PPS Count Register */
 
-/* ********************************************************** */
-/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
-/*     and MULTI BIT READ MACROS                              */
-/* ********************************************************** */
-
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 /* Bit masks for EMAC_PTP_CTL */
 
 #define                    PTP_EN  0x1        /* Enable the PTP_TSYNC module */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index f9fd2b2..9241205 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -585,58 +585,6 @@
 **				modifier UNLESS the lower order bits are saved and ORed back in when
 **				the macro is used.
 *************************************************************************************/
-/*
-** ********************* PLL AND RESET MASKS ****************************************/
-/* PLL_CTL Masks																	*/
-#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2					*/
-#define PLL_OFF			0x0002	/* PLL Not Powered									*/
-#define STOPCK			0x0008	/* Core Clock Off									*/
-#define PDWN			0x0020	/* Enter Deep Sleep Mode							*/
-#define	IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches			*/
-#define	OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals			*/
-#define BYPASS			0x0100	/* Bypass the PLL									*/
-#define	MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors			*/
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL		*/
-
-/* PLL_DIV Masks														*/
-#define SSEL			0x000F	/* System Select						*/
-#define	CSEL			0x0030	/* Core Select							*/
-#define CSEL_DIV1		0x0000	/* 		CCLK = VCO / 1					*/
-#define CSEL_DIV2		0x0010	/* 		CCLK = VCO / 2					*/
-#define	CSEL_DIV4		0x0020	/* 		CCLK = VCO / 4					*/
-#define	CSEL_DIV8		0x0030	/* 		CCLK = VCO / 8					*/
-/* PLL_DIV Macros														*/
-#define SET_SSEL(x)		((x)&0xF)		/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
-
-/* VR_CTL Masks	*/
-#define	FREQ			0x3000	/* Switching Oscillator Frequency For Regulator	*/
-#define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
-
-#define	VLEV			0x00F0	/* Internal Voltage Level					*/
-#define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
-#define	VLEV_090		0x0070	/* 		VLEV = 0.90 V (-5% - +10% Accuracy)	*/
-#define	VLEV_095		0x0080	/* 		VLEV = 0.95 V (-5% - +10% Accuracy)	*/
-#define	VLEV_100		0x0090	/* 		VLEV = 1.00 V (-5% - +10% Accuracy)	*/
-#define	VLEV_105		0x00A0	/* 		VLEV = 1.05 V (-5% - +10% Accuracy)	*/
-#define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
-#define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
-#define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
-#define	VLEV_125		0x00E0	/* 		VLEV = 1.25 V (-5% - +10% Accuracy)	*/
-#define	VLEV_130		0x00F0	/* 		VLEV = 1.30 V (-5% - +10% Accuracy)	*/
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
-#define	USBWE			0x0200	/* Enable USB Wakeup From Hibernate			*/
-#define	PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate			*/
-#define	CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
-#define	PHYCLKOE		CLKBUFOE	/* Alternative legacy name for the above */
-#define	SCKELOW		0x8000	/* Enable Drive CKE Low During Reset		*/
-
-/* PLL_STAT Masks																	*/
-#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled	*/
-#define	FULL_ON				0x0002	/* Processor In Full On Mode					*/
-#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled	*/
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached					*/
 
 /* CHIPID Masks */
 #define CHIPID_VERSION         0xF0000000
@@ -756,66 +704,6 @@
 #define IWR_DISABLE(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F))) 	/* Wakeup Disable Peripheral #x		*/
 
 
-/* ********* WATCHDOG TIMER MASKS ******************** */
-
-/* Watchdog Timer WDOG_CTL Register Masks */
-
-#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
-#define WDEV_RESET 0x0000 /* generate reset event on roll over */
-#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
-#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
-#define WDEV_NONE 0x0006 /* no event on roll over */
-#define WDEN 0x0FF0 /* enable watchdog */
-#define WDDIS 0x0AD0 /* disable watchdog */
-#define WDRO 0x8000 /* watchdog rolled over latch */
-
-/* depreciated WDOG_CTL Register Masks for legacy code */
-
-
-#define ICTL WDEV
-#define ENABLE_RESET WDEV_RESET
-#define WDOG_RESET WDEV_RESET
-#define ENABLE_NMI WDEV_NMI
-#define WDOG_NMI WDEV_NMI
-#define ENABLE_GPI WDEV_GPI
-#define WDOG_GPI WDEV_GPI
-#define DISABLE_EVT WDEV_NONE
-#define WDOG_NONE WDEV_NONE
-
-#define TMR_EN WDEN
-#define TMR_DIS WDDIS
-#define TRO WDRO
-#define ICTL_P0 0x01
- #define ICTL_P1 0x02
-#define TRO_P 0x0F
-
-
-
-/* ***************  REAL TIME CLOCK MASKS  **************************/
-/* RTC_STAT and RTC_ALARM Masks										*/
-#define	RTC_SEC				0x0000003F	/* Real-Time Clock Seconds	*/
-#define	RTC_MIN				0x00000FC0	/* Real-Time Clock Minutes	*/
-#define	RTC_HR				0x0001F000	/* Real-Time Clock Hours	*/
-#define	RTC_DAY				0xFFFE0000	/* Real-Time Clock Days		*/
-
-/* RTC_ALARM Macro			z=day		y=hr	x=min	w=sec		*/
-#define SET_ALARM(z,y,x,w)	((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
-
-/* RTC_ICTL and RTC_ISTAT Masks																		*/
-#define	STOPWATCH			0x0001		/* Stopwatch Interrupt Enable								*/
-#define	ALARM				0x0002		/* Alarm Interrupt Enable									*/
-#define	SECOND				0x0004		/* Seconds (1 Hz) Interrupt Enable							*/
-#define	MINUTE				0x0008		/* Minutes Interrupt Enable									*/
-#define	HOUR				0x0010		/* Hours Interrupt Enable									*/
-#define	DAY					0x0020		/* 24 Hours (Days) Interrupt Enable							*/
-#define	DAY_ALARM			0x0040		/* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable	*/
-#define	WRITE_PENDING		0x4000		/* Write Pending Status										*/
-#define	WRITE_COMPLETE		0x8000		/* Write Complete Interrupt Enable							*/
-
-/* RTC_FAST / RTC_PREN Mask												*/
-#define PREN				0x0001	/* Enable Prescaler, RTC Runs @1 Hz	*/
-
-
 /* ************** UART CONTROLLER MASKS *************************/
 /* UARTx_LCR Masks												*/
 #define WLS(x)		(((x)-5) & 0x03)	/* Word Length Select */
@@ -1372,33 +1260,6 @@
 
 
 /* **************************  DMA CONTROLLER MASKS  ********************************/
-/* DMAx_CONFIG, MDMA_yy_CONFIG Masks												*/
-#define DMAEN			0x0001		/* DMA Channel Enable							*/
-#define WNR				0x0002		/* Channel Direction (W/R*)						*/
-#define WDSIZE_8		0x0000		/* Transfer Word Size = 8						*/
-#define WDSIZE_16		0x0004		/* Transfer Word Size = 16						*/
-#define WDSIZE_32		0x0008		/* Transfer Word Size = 32						*/
-#define DMA2D			0x0010		/* DMA Mode (2D/1D*)							*/
-#define RESTART			0x0020		/* DMA Buffer Clear								*/
-#define DI_SEL			0x0040		/* Data Interrupt Timing Select					*/
-#define DI_EN			0x0080		/* Data Interrupt Enable						*/
-#define NDSIZE_0		0x0000		/* Next Descriptor Size = 0 (Stop/Autobuffer)	*/
-#define NDSIZE_1		0x0100		/* Next Descriptor Size = 1						*/
-#define NDSIZE_2		0x0200		/* Next Descriptor Size = 2						*/
-#define NDSIZE_3		0x0300		/* Next Descriptor Size = 3						*/
-#define NDSIZE_4		0x0400		/* Next Descriptor Size = 4						*/
-#define NDSIZE_5		0x0500		/* Next Descriptor Size = 5						*/
-#define NDSIZE_6		0x0600		/* Next Descriptor Size = 6						*/
-#define NDSIZE_7		0x0700		/* Next Descriptor Size = 7						*/
-#define NDSIZE_8		0x0800		/* Next Descriptor Size = 8						*/
-#define NDSIZE_9		0x0900		/* Next Descriptor Size = 9						*/
-#define NDSIZE	        	0x0900	/* Next Descriptor Size */
-#define DMAFLOW	        	0x7000	/* Flow Control */
-#define DMAFLOW_STOP		0x0000		/* Stop Mode									*/
-#define DMAFLOW_AUTO		0x1000		/* Autobuffer Mode								*/
-#define DMAFLOW_ARRAY		0x4000		/* Descriptor Array Mode						*/
-#define DMAFLOW_SMALL		0x6000		/* Small Model Descriptor List Mode				*/
-#define DMAFLOW_LARGE		0x7000		/* Large Model Descriptor List Mode				*/
 
 /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks								*/
 #define CTYPE			0x0040	/* DMA Channel Type Indicator (Memory/Peripheral*)	*/
@@ -1416,13 +1277,6 @@
 #define	PMAP_UART1RX	0xA000	/* 		UART1 Port Receive DMA						*/
 #define	PMAP_UART1TX	0xB000	/* 		UART1 Port Transmit DMA						*/
 
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks						*/
-#define DMA_DONE		0x0001	/* DMA Completion Interrupt Status	*/
-#define DMA_ERR			0x0002	/* DMA Error Interrupt Status		*/
-#define DFETCH			0x0004	/* DMA Descriptor Fetch Indicator	*/
-#define DMA_RUN			0x0008	/* DMA Channel Running Indicator	*/
-
-
 /*  ************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
 /*  PPI_CONTROL Masks													*/
 #define PORT_EN			0x0001		/* PPI Port Enable					*/
@@ -1830,46 +1684,6 @@
 #define BNDMODE_CAPT     0x2000  /* boundary capture mode */
 #define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
 
-/* Bit masks for OTP_CONTROL */
-
-#define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
-#define                      FIEN  0x800      /* OTP/Fuse Interrupt Enable */
-#define                     nFIEN  0x0
-#define                  FTESTDEC  0x1000     /* OTP/Fuse Test Decoder */
-#define                 nFTESTDEC  0x0
-#define                   FWRTEST  0x2000     /* OTP/Fuse Write Test */
-#define                  nFWRTEST  0x0
-#define                     FRDEN  0x4000     /* OTP/Fuse Read Enable */
-#define                    nFRDEN  0x0
-#define                     FWREN  0x8000     /* OTP/Fuse Write Enable */
-#define                    nFWREN  0x0
-
-/* Bit masks for OTP_BEN */
-
-#define                      FBEN  0xffff     /* OTP/Fuse Byte Enable */
-
-/* Bit masks for OTP_STATUS */
-
-#define                     FCOMP  0x1        /* OTP/Fuse Access Complete */
-#define                    nFCOMP  0x0
-#define                    FERROR  0x2        /* OTP/Fuse Access Error */
-#define                   nFERROR  0x0
-#define                  MMRGLOAD  0x10       /* Memory Mapped Register Gasket Load */
-#define                 nMMRGLOAD  0x0
-#define                  MMRGLOCK  0x20       /* Memory Mapped Register Gasket Lock */
-#define                 nMMRGLOCK  0x0
-#define                    FPGMEN  0x40       /* OTP/Fuse Program Enable */
-#define                   nFPGMEN  0x0
-
-/* Bit masks for OTP_TIMING */
-
-#define                   USECDIV  0xff       /* Micro Second Divider */
-#define                   READACC  0x7f00     /* Read Access Time */
-#define                   CPUMPRL  0x38000    /* Charge Pump Release Time */
-#define                   CPUMPSU  0xc0000    /* Charge Pump Setup Time */
-#define                   CPUMPHD  0xf00000   /* Charge Pump Hold Time */
-#define                   PGMTIME  0xff000000 /* Program Time */
-
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
index 848ac6f..1f8cbe9 100644
--- a/arch/blackfin/mach-bf527/Kconfig
+++ b/arch/blackfin/mach-bf527/Kconfig
@@ -1,3 +1,7 @@
+config BF52x
+	def_bool y
+	depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
+
 if (BF52x)
 
 source "arch/blackfin/mach-bf527/boards/Kconfig"
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index f1996b1..7ab0800 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -15,9 +15,6 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/etherdevice.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -65,7 +62,7 @@
 };
 
 static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760-hcd",
+	.name           = "isp1760",
 	.id             = 0,
 	.dev = {
 		.platform_data = &isp1760_priv,
@@ -317,45 +314,6 @@
 };
 #endif
 
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
-	{
-		.start = 0x20360000,
-		.end = 0x20360000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20360004,
-		.end = 0x20360004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct isp1362_platform_data isp1362_priv = {
-	.sel15Kres = 1,
-	.clknotstop = 0,
-	.oc_enable = 0,
-	.int_act_high = 0,
-	.int_edge_triggered = 0,
-	.remote_wakeup_connected = 0,
-	.no_power_switching = 1,
-	.power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
-	.name = "isp1362-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &isp1362_priv,
-	},
-	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
-	.resource = isp1362_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
@@ -841,10 +799,6 @@
 	&sl811_hcd_device,
 #endif
 
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-	&isp1362_hcd_device,
-#endif
-
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
 	&bfin_isp1760_device,
 #endif
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index f09665f..5294fdd 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -13,9 +13,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -63,7 +60,7 @@
 };
 
 static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760-hcd",
+	.name           = "isp1760",
 	.id             = 0,
 	.dev = {
 		.platform_data = &isp1760_priv,
@@ -373,45 +370,6 @@
 };
 #endif
 
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
-	{
-		.start = 0x20360000,
-		.end = 0x20360000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20360004,
-		.end = 0x20360004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct isp1362_platform_data isp1362_priv = {
-	.sel15Kres = 1,
-	.clknotstop = 0,
-	.oc_enable = 0,
-	.int_act_high = 0,
-	.int_edge_triggered = 0,
-	.remote_wakeup_connected = 0,
-	.no_power_switching = 1,
-	.power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
-	.name = "isp1362-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &isp1362_priv,
-	},
-	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
-	.resource = isp1362_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
@@ -688,12 +646,6 @@
 };
 #endif  /* spi master and devices */
 
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
-	.name = "bf537-lq035",
-};
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -850,7 +802,7 @@
 };
 #endif
 
-#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
 #include <linux/input.h>
 #include <asm/bfin_rotary.h>
 
@@ -924,10 +876,6 @@
 	&sl811_hcd_device,
 #endif
 
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-	&isp1362_hcd_device,
-#endif
-
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
 	&bfin_isp1760_device,
 #endif
@@ -957,10 +905,6 @@
 	&bfin_spi0_device,
 #endif
 
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-	&bfin_fb_device,
-#endif
-
 #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
 	&bf52x_t350mcqb_device,
 #endif
@@ -991,7 +935,7 @@
 	&bfin_device_gpiokeys,
 #endif
 
-#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
 	&bfin_rotary_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index e7d6034..f714c5d 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -46,10 +46,4 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* PLL_DIV Masks													*/
-#define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
-#define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
-#define CCLK_DIV4 CSEL_DIV4	/*          CCLK = VCO / 4                                  */
-#define CCLK_DIV8 CSEL_DIV8	/*          CCLK = VCO / 8                                  */
-
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
index dc3119e9..d7e2751 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
@@ -10,15 +10,8 @@
 /* include all Core registers and bit definitions */
 #include "defBF525.h"
 
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
-
-/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "cdefBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF525 that are not in the common header */
+/* BF525 is BF522 + USB */
+#include "cdefBF522.h"
 
 /* USB Control Registers */
 
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
index d6579449..c7ba544 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
@@ -10,15 +10,8 @@
 /* include all Core registers and bit definitions */
 #include "defBF527.h"
 
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
-
-/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "cdefBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF527 that are not in the common header */
+/* BF527 is BF525 + EMAC */
+#include "cdefBF525.h"
 
 /* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
 
@@ -185,417 +178,4 @@
 #define bfin_read_EMAC_TXC_ABORT()		bfin_read32(EMAC_TXC_ABORT)
 #define bfin_write_EMAC_TXC_ABORT(val)		bfin_write32(EMAC_TXC_ABORT, val)
 
-/* USB Control Registers */
-
-#define bfin_read_USB_FADDR()			bfin_read16(USB_FADDR)
-#define bfin_write_USB_FADDR(val)		bfin_write16(USB_FADDR, val)
-#define bfin_read_USB_POWER()			bfin_read16(USB_POWER)
-#define bfin_write_USB_POWER(val)		bfin_write16(USB_POWER, val)
-#define bfin_read_USB_INTRTX()			bfin_read16(USB_INTRTX)
-#define bfin_write_USB_INTRTX(val)		bfin_write16(USB_INTRTX, val)
-#define bfin_read_USB_INTRRX()			bfin_read16(USB_INTRRX)
-#define bfin_write_USB_INTRRX(val)		bfin_write16(USB_INTRRX, val)
-#define bfin_read_USB_INTRTXE()			bfin_read16(USB_INTRTXE)
-#define bfin_write_USB_INTRTXE(val)		bfin_write16(USB_INTRTXE, val)
-#define bfin_read_USB_INTRRXE()			bfin_read16(USB_INTRRXE)
-#define bfin_write_USB_INTRRXE(val)		bfin_write16(USB_INTRRXE, val)
-#define bfin_read_USB_INTRUSB()			bfin_read16(USB_INTRUSB)
-#define bfin_write_USB_INTRUSB(val)		bfin_write16(USB_INTRUSB, val)
-#define bfin_read_USB_INTRUSBE()		bfin_read16(USB_INTRUSBE)
-#define bfin_write_USB_INTRUSBE(val)		bfin_write16(USB_INTRUSBE, val)
-#define bfin_read_USB_FRAME()			bfin_read16(USB_FRAME)
-#define bfin_write_USB_FRAME(val)		bfin_write16(USB_FRAME, val)
-#define bfin_read_USB_INDEX()			bfin_read16(USB_INDEX)
-#define bfin_write_USB_INDEX(val)		bfin_write16(USB_INDEX, val)
-#define bfin_read_USB_TESTMODE()		bfin_read16(USB_TESTMODE)
-#define bfin_write_USB_TESTMODE(val)		bfin_write16(USB_TESTMODE, val)
-#define bfin_read_USB_GLOBINTR()		bfin_read16(USB_GLOBINTR)
-#define bfin_write_USB_GLOBINTR(val)		bfin_write16(USB_GLOBINTR, val)
-#define bfin_read_USB_GLOBAL_CTL()		bfin_read16(USB_GLOBAL_CTL)
-#define bfin_write_USB_GLOBAL_CTL(val)		bfin_write16(USB_GLOBAL_CTL, val)
-
-/* USB Packet Control Registers */
-
-#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
-#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
-#define bfin_read_USB_CSR0()			bfin_read16(USB_CSR0)
-#define bfin_write_USB_CSR0(val)		bfin_write16(USB_CSR0, val)
-#define bfin_read_USB_TXCSR()			bfin_read16(USB_TXCSR)
-#define bfin_write_USB_TXCSR(val)		bfin_write16(USB_TXCSR, val)
-#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
-#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
-#define bfin_read_USB_RXCSR()			bfin_read16(USB_RXCSR)
-#define bfin_write_USB_RXCSR(val)		bfin_write16(USB_RXCSR, val)
-#define bfin_read_USB_COUNT0()			bfin_read16(USB_COUNT0)
-#define bfin_write_USB_COUNT0(val)		bfin_write16(USB_COUNT0, val)
-#define bfin_read_USB_RXCOUNT()			bfin_read16(USB_RXCOUNT)
-#define bfin_write_USB_RXCOUNT(val)		bfin_write16(USB_RXCOUNT, val)
-#define bfin_read_USB_TXTYPE()			bfin_read16(USB_TXTYPE)
-#define bfin_write_USB_TXTYPE(val)		bfin_write16(USB_TXTYPE, val)
-#define bfin_read_USB_NAKLIMIT0()		bfin_read16(USB_NAKLIMIT0)
-#define bfin_write_USB_NAKLIMIT0(val)		bfin_write16(USB_NAKLIMIT0, val)
-#define bfin_read_USB_TXINTERVAL()		bfin_read16(USB_TXINTERVAL)
-#define bfin_write_USB_TXINTERVAL(val)		bfin_write16(USB_TXINTERVAL, val)
-#define bfin_read_USB_RXTYPE()			bfin_read16(USB_RXTYPE)
-#define bfin_write_USB_RXTYPE(val)		bfin_write16(USB_RXTYPE, val)
-#define bfin_read_USB_RXINTERVAL()		bfin_read16(USB_RXINTERVAL)
-#define bfin_write_USB_RXINTERVAL(val)		bfin_write16(USB_RXINTERVAL, val)
-#define bfin_read_USB_TXCOUNT()			bfin_read16(USB_TXCOUNT)
-#define bfin_write_USB_TXCOUNT(val)		bfin_write16(USB_TXCOUNT, val)
-
-/* USB Endpoint FIFO Registers */
-
-#define bfin_read_USB_EP0_FIFO()		bfin_read16(USB_EP0_FIFO)
-#define bfin_write_USB_EP0_FIFO(val)		bfin_write16(USB_EP0_FIFO, val)
-#define bfin_read_USB_EP1_FIFO()		bfin_read16(USB_EP1_FIFO)
-#define bfin_write_USB_EP1_FIFO(val)		bfin_write16(USB_EP1_FIFO, val)
-#define bfin_read_USB_EP2_FIFO()		bfin_read16(USB_EP2_FIFO)
-#define bfin_write_USB_EP2_FIFO(val)		bfin_write16(USB_EP2_FIFO, val)
-#define bfin_read_USB_EP3_FIFO()		bfin_read16(USB_EP3_FIFO)
-#define bfin_write_USB_EP3_FIFO(val)		bfin_write16(USB_EP3_FIFO, val)
-#define bfin_read_USB_EP4_FIFO()		bfin_read16(USB_EP4_FIFO)
-#define bfin_write_USB_EP4_FIFO(val)		bfin_write16(USB_EP4_FIFO, val)
-#define bfin_read_USB_EP5_FIFO()		bfin_read16(USB_EP5_FIFO)
-#define bfin_write_USB_EP5_FIFO(val)		bfin_write16(USB_EP5_FIFO, val)
-#define bfin_read_USB_EP6_FIFO()		bfin_read16(USB_EP6_FIFO)
-#define bfin_write_USB_EP6_FIFO(val)		bfin_write16(USB_EP6_FIFO, val)
-#define bfin_read_USB_EP7_FIFO()		bfin_read16(USB_EP7_FIFO)
-#define bfin_write_USB_EP7_FIFO(val)		bfin_write16(USB_EP7_FIFO, val)
-
-/* USB OTG Control Registers */
-
-#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
-#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
-#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
-#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
-#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
-#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
-
-/* USB Phy Control Registers */
-
-#define bfin_read_USB_LINKINFO()		bfin_read16(USB_LINKINFO)
-#define bfin_write_USB_LINKINFO(val)		bfin_write16(USB_LINKINFO, val)
-#define bfin_read_USB_VPLEN()			bfin_read16(USB_VPLEN)
-#define bfin_write_USB_VPLEN(val)		bfin_write16(USB_VPLEN, val)
-#define bfin_read_USB_HS_EOF1()			bfin_read16(USB_HS_EOF1)
-#define bfin_write_USB_HS_EOF1(val)		bfin_write16(USB_HS_EOF1, val)
-#define bfin_read_USB_FS_EOF1()			bfin_read16(USB_FS_EOF1)
-#define bfin_write_USB_FS_EOF1(val)		bfin_write16(USB_FS_EOF1, val)
-#define bfin_read_USB_LS_EOF1()			bfin_read16(USB_LS_EOF1)
-#define bfin_write_USB_LS_EOF1(val)		bfin_write16(USB_LS_EOF1, val)
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
-#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
-#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
-
-#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
-#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
-#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
-
-#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
-#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
-#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
-#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
-
-/* USB Endpoint 0 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
-#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
-#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
-#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
-#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
-#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
-#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
-#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
-#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
-#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
-#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
-#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
-#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
-#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
-#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
-#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
-#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
-#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
-
-/* USB Endpoint 1 Control Registers */
-
-#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
-#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
-#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
-#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
-#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
-#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
-#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
-#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
-#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
-#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
-#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
-#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
-#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
-#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
-#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
-#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
-#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
-
-/* USB Endpoint 2 Control Registers */
-
-#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
-#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
-#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
-#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
-#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
-#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
-#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
-#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
-#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
-#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
-#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
-#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
-#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
-#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
-#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
-#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
-#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
-
-/* USB Endpoint 3 Control Registers */
-
-#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
-#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
-#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
-#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
-#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
-#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
-#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
-#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
-#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
-#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
-#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
-#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
-#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
-#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
-#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
-#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
-#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
-
-/* USB Endpoint 4 Control Registers */
-
-#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
-#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
-#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
-#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
-#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
-#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
-#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
-#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
-#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
-#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
-#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
-#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
-#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
-#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
-#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
-#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
-#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
-
-/* USB Endpoint 5 Control Registers */
-
-#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
-#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
-#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
-#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
-#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
-#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
-#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
-#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
-#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
-#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
-#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
-#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
-#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
-#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
-#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
-#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
-#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
-
-/* USB Endpoint 6 Control Registers */
-
-#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
-#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
-#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
-#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
-#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
-#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
-#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
-#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
-#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
-#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
-#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
-#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
-#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
-#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
-#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
-#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
-#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
-
-/* USB Endpoint 7 Control Registers */
-
-#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
-#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
-#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
-#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
-#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
-#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
-#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
-#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
-#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
-#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
-#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
-#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
-#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
-#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
-#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
-#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
-#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
-
-#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
-#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
-
-/* USB Channel 0 Config Registers */
-
-#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
-#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
-#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
-#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
-#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
-#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
-#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
-#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
-#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
-#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
-
-/* USB Channel 1 Config Registers */
-
-#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
-#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
-#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
-#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
-#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
-#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
-#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
-#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
-#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
-#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
-
-/* USB Channel 2 Config Registers */
-
-#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
-#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
-#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
-#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
-#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
-#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
-#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
-#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
-#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
-#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
-
-/* USB Channel 3 Config Registers */
-
-#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
-#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
-#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
-#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
-#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
-#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
-#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
-#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
-#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
-#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
-
-/* USB Channel 4 Config Registers */
-
-#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
-#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
-#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
-#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
-#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
-#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
-#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
-#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
-#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
-#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
-
-/* USB Channel 5 Config Registers */
-
-#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
-#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
-#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
-#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
-#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
-#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
-#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
-#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
-#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
-#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
-
-/* USB Channel 6 Config Registers */
-
-#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
-#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
-#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
-#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
-#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
-#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
-#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
-#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
-#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
-#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
-
-/* USB Channel 7 Config Registers */
-
-#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
-#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
-#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
-#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
-#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
-#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
-#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
-#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
-#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
-#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
-
 #endif /* _CDEF_BF527_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
index 7014dde10..12f2ad4 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -844,6 +844,7 @@
 #define bfin_write_PPI_CONTROL(val)		bfin_write16(PPI_CONTROL, val)
 #define bfin_read_PPI_STATUS()			bfin_read16(PPI_STATUS)
 #define bfin_write_PPI_STATUS(val)		bfin_write16(PPI_STATUS, val)
+#define bfin_clear_PPI_STATUS()			bfin_write_PPI_STATUS(0xFFFF)
 #define bfin_read_PPI_DELAY()			bfin_read16(PPI_DELAY)
 #define bfin_write_PPI_DELAY(val)		bfin_write16(PPI_DELAY, val)
 #define bfin_read_PPI_COUNT()			bfin_read16(PPI_COUNT)
@@ -1062,17 +1063,6 @@
 #define bfin_read_CNT_MIN()			bfin_read32(CNT_MIN)
 #define bfin_write_CNT_MIN(val)			bfin_write32(CNT_MIN, val)
 
-/* OTP/FUSE Registers */
-
-#define bfin_read_OTP_CONTROL()			bfin_read16(OTP_CONTROL)
-#define bfin_write_OTP_CONTROL(val)		bfin_write16(OTP_CONTROL, val)
-#define bfin_read_OTP_BEN()			bfin_read16(OTP_BEN)
-#define bfin_write_OTP_BEN(val)			bfin_write16(OTP_BEN, val)
-#define bfin_read_OTP_STATUS()			bfin_read16(OTP_STATUS)
-#define bfin_write_OTP_STATUS(val)		bfin_write16(OTP_STATUS, val)
-#define bfin_read_OTP_TIMING()			bfin_read32(OTP_TIMING)
-#define bfin_write_OTP_TIMING(val)		bfin_write32(OTP_TIMING, val)
-
 /* Security Registers */
 
 #define bfin_read_SECURE_SYSSWT()		bfin_read32(SECURE_SYSSWT)
@@ -1082,17 +1072,6 @@
 #define bfin_read_SECURE_STATUS()		bfin_read16(SECURE_STATUS)
 #define bfin_write_SECURE_STATUS(val)		bfin_write16(SECURE_STATUS, val)
 
-/* OTP Read/Write Data Buffer Registers */
-
-#define bfin_read_OTP_DATA0()			bfin_read32(OTP_DATA0)
-#define bfin_write_OTP_DATA0(val)		bfin_write32(OTP_DATA0, val)
-#define bfin_read_OTP_DATA1()			bfin_read32(OTP_DATA1)
-#define bfin_write_OTP_DATA1(val)		bfin_write32(OTP_DATA1, val)
-#define bfin_read_OTP_DATA2()			bfin_read32(OTP_DATA2)
-#define bfin_write_OTP_DATA2(val)		bfin_write32(OTP_DATA2, val)
-#define bfin_read_OTP_DATA3()			bfin_read32(OTP_DATA3)
-#define bfin_write_OTP_DATA3(val)		bfin_write32(OTP_DATA3, val)
-
 /* NFC Registers */
 
 #define bfin_read_NFC_CTL()			bfin_read16(NFC_CTL)
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
index 82abefc..c136f70 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -7,15 +7,8 @@
 #ifndef _DEF_BF525_H
 #define _DEF_BF525_H
 
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
-
-/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "defBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF525 that are not in the common header */
+/* BF525 is BF522 + USB */
+#include "defBF522.h"
 
 /* USB Control Registers */
 
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h
index 570a125..4dd58fb 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h
@@ -7,15 +7,9 @@
 #ifndef _DEF_BF527_H
 #define _DEF_BF527_H
 
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
+/* BF527 is BF525 + EMAC */
+#include "defBF525.h"
 
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
-
-/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "defBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF527 that are not in the common header */
 /* 10/100 Ethernet Controller	(0xFFC03000 - 0xFFC031FF) */
 
 #define EMAC_OPMODE             0xFFC03000       /* Operating Mode Register                              */
@@ -394,673 +388,4 @@
 #define	TX_GE1024_CNT     0x00200000    /* 1024-Max-Byte TX Frames Sent                           */
 #define	TX_ABORT_CNT      0x00400000    /* TX Frames Aborted                                      */
 
-/* USB Control Registers */
-
-#define                        USB_FADDR  0xffc03800   /* Function address register */
-#define                        USB_POWER  0xffc03804   /* Power management register */
-#define                       USB_INTRTX  0xffc03808   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
-#define                       USB_INTRRX  0xffc0380c   /* Interrupt register for Rx endpoints 1 to 7 */
-#define                      USB_INTRTXE  0xffc03810   /* Interrupt enable register for IntrTx */
-#define                      USB_INTRRXE  0xffc03814   /* Interrupt enable register for IntrRx */
-#define                      USB_INTRUSB  0xffc03818   /* Interrupt register for common USB interrupts */
-#define                     USB_INTRUSBE  0xffc0381c   /* Interrupt enable register for IntrUSB */
-#define                        USB_FRAME  0xffc03820   /* USB frame number */
-#define                        USB_INDEX  0xffc03824   /* Index register for selecting the indexed endpoint registers */
-#define                     USB_TESTMODE  0xffc03828   /* Enabled USB 20 test modes */
-#define                     USB_GLOBINTR  0xffc0382c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
-#define                   USB_GLOBAL_CTL  0xffc03830   /* Global Clock Control for the core */
-
-/* USB Packet Control Registers */
-
-#define                USB_TX_MAX_PACKET  0xffc03840   /* Maximum packet size for Host Tx endpoint */
-#define                         USB_CSR0  0xffc03844   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define                        USB_TXCSR  0xffc03844   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define                USB_RX_MAX_PACKET  0xffc03848   /* Maximum packet size for Host Rx endpoint */
-#define                        USB_RXCSR  0xffc0384c   /* Control Status register for Host Rx endpoint */
-#define                       USB_COUNT0  0xffc03850   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define                      USB_RXCOUNT  0xffc03850   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define                       USB_TXTYPE  0xffc03854   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
-#define                    USB_NAKLIMIT0  0xffc03858   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define                   USB_TXINTERVAL  0xffc03858   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define                       USB_RXTYPE  0xffc0385c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
-#define                   USB_RXINTERVAL  0xffc03860   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
-#define                      USB_TXCOUNT  0xffc03868   /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* USB Endpoint FIFO Registers */
-
-#define                     USB_EP0_FIFO  0xffc03880   /* Endpoint 0 FIFO */
-#define                     USB_EP1_FIFO  0xffc03888   /* Endpoint 1 FIFO */
-#define                     USB_EP2_FIFO  0xffc03890   /* Endpoint 2 FIFO */
-#define                     USB_EP3_FIFO  0xffc03898   /* Endpoint 3 FIFO */
-#define                     USB_EP4_FIFO  0xffc038a0   /* Endpoint 4 FIFO */
-#define                     USB_EP5_FIFO  0xffc038a8   /* Endpoint 5 FIFO */
-#define                     USB_EP6_FIFO  0xffc038b0   /* Endpoint 6 FIFO */
-#define                     USB_EP7_FIFO  0xffc038b8   /* Endpoint 7 FIFO */
-
-/* USB OTG Control Registers */
-
-#define                  USB_OTG_DEV_CTL  0xffc03900   /* OTG Device Control Register */
-#define                 USB_OTG_VBUS_IRQ  0xffc03904   /* OTG VBUS Control Interrupts */
-#define                USB_OTG_VBUS_MASK  0xffc03908   /* VBUS Control Interrupt Enable */
-
-/* USB Phy Control Registers */
-
-#define                     USB_LINKINFO  0xffc03948   /* Enables programming of some PHY-side delays */
-#define                        USB_VPLEN  0xffc0394c   /* Determines duration of VBUS pulse for VBUS charging */
-#define                      USB_HS_EOF1  0xffc03950   /* Time buffer for High-Speed transactions */
-#define                      USB_FS_EOF1  0xffc03954   /* Time buffer for Full-Speed transactions */
-#define                      USB_LS_EOF1  0xffc03958   /* Time buffer for Low-Speed transactions */
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define                   USB_APHY_CNTRL  0xffc039e0   /* Register that increases visibility of Analog PHY */
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define                   USB_APHY_CALIB  0xffc039e4   /* Register used to set some calibration values */
-
-#define                  USB_APHY_CNTRL2  0xffc039e8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define                     USB_PHY_TEST  0xffc039ec   /* Used for reducing simulation time and simplifies FIFO testability */
-
-#define                  USB_PLLOSC_CTRL  0xffc039f0   /* Used to program different parameters for USB PLL and Oscillator */
-#define                   USB_SRP_CLKDIV  0xffc039f4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
-
-/* USB Endpoint 0 Control Registers */
-
-#define                USB_EP_NI0_TXMAXP  0xffc03a00   /* Maximum packet size for Host Tx endpoint0 */
-#define                 USB_EP_NI0_TXCSR  0xffc03a04   /* Control Status register for endpoint 0 */
-#define                USB_EP_NI0_RXMAXP  0xffc03a08   /* Maximum packet size for Host Rx endpoint0 */
-#define                 USB_EP_NI0_RXCSR  0xffc03a0c   /* Control Status register for Host Rx endpoint0 */
-#define               USB_EP_NI0_RXCOUNT  0xffc03a10   /* Number of bytes received in endpoint 0 FIFO */
-#define                USB_EP_NI0_TXTYPE  0xffc03a14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
-#define            USB_EP_NI0_TXINTERVAL  0xffc03a18   /* Sets the NAK response timeout on Endpoint 0 */
-#define                USB_EP_NI0_RXTYPE  0xffc03a1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
-#define            USB_EP_NI0_RXINTERVAL  0xffc03a20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
-#define               USB_EP_NI0_TXCOUNT  0xffc03a28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
-
-/* USB Endpoint 1 Control Registers */
-
-#define                USB_EP_NI1_TXMAXP  0xffc03a40   /* Maximum packet size for Host Tx endpoint1 */
-#define                 USB_EP_NI1_TXCSR  0xffc03a44   /* Control Status register for endpoint1 */
-#define                USB_EP_NI1_RXMAXP  0xffc03a48   /* Maximum packet size for Host Rx endpoint1 */
-#define                 USB_EP_NI1_RXCSR  0xffc03a4c   /* Control Status register for Host Rx endpoint1 */
-#define               USB_EP_NI1_RXCOUNT  0xffc03a50   /* Number of bytes received in endpoint1 FIFO */
-#define                USB_EP_NI1_TXTYPE  0xffc03a54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
-#define            USB_EP_NI1_TXINTERVAL  0xffc03a58   /* Sets the NAK response timeout on Endpoint1 */
-#define                USB_EP_NI1_RXTYPE  0xffc03a5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
-#define            USB_EP_NI1_RXINTERVAL  0xffc03a60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
-#define               USB_EP_NI1_TXCOUNT  0xffc03a68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
-
-/* USB Endpoint 2 Control Registers */
-
-#define                USB_EP_NI2_TXMAXP  0xffc03a80   /* Maximum packet size for Host Tx endpoint2 */
-#define                 USB_EP_NI2_TXCSR  0xffc03a84   /* Control Status register for endpoint2 */
-#define                USB_EP_NI2_RXMAXP  0xffc03a88   /* Maximum packet size for Host Rx endpoint2 */
-#define                 USB_EP_NI2_RXCSR  0xffc03a8c   /* Control Status register for Host Rx endpoint2 */
-#define               USB_EP_NI2_RXCOUNT  0xffc03a90   /* Number of bytes received in endpoint2 FIFO */
-#define                USB_EP_NI2_TXTYPE  0xffc03a94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
-#define            USB_EP_NI2_TXINTERVAL  0xffc03a98   /* Sets the NAK response timeout on Endpoint2 */
-#define                USB_EP_NI2_RXTYPE  0xffc03a9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
-#define            USB_EP_NI2_RXINTERVAL  0xffc03aa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
-#define               USB_EP_NI2_TXCOUNT  0xffc03aa8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
-
-/* USB Endpoint 3 Control Registers */
-
-#define                USB_EP_NI3_TXMAXP  0xffc03ac0   /* Maximum packet size for Host Tx endpoint3 */
-#define                 USB_EP_NI3_TXCSR  0xffc03ac4   /* Control Status register for endpoint3 */
-#define                USB_EP_NI3_RXMAXP  0xffc03ac8   /* Maximum packet size for Host Rx endpoint3 */
-#define                 USB_EP_NI3_RXCSR  0xffc03acc   /* Control Status register for Host Rx endpoint3 */
-#define               USB_EP_NI3_RXCOUNT  0xffc03ad0   /* Number of bytes received in endpoint3 FIFO */
-#define                USB_EP_NI3_TXTYPE  0xffc03ad4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
-#define            USB_EP_NI3_TXINTERVAL  0xffc03ad8   /* Sets the NAK response timeout on Endpoint3 */
-#define                USB_EP_NI3_RXTYPE  0xffc03adc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
-#define            USB_EP_NI3_RXINTERVAL  0xffc03ae0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
-#define               USB_EP_NI3_TXCOUNT  0xffc03ae8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
-
-/* USB Endpoint 4 Control Registers */
-
-#define                USB_EP_NI4_TXMAXP  0xffc03b00   /* Maximum packet size for Host Tx endpoint4 */
-#define                 USB_EP_NI4_TXCSR  0xffc03b04   /* Control Status register for endpoint4 */
-#define                USB_EP_NI4_RXMAXP  0xffc03b08   /* Maximum packet size for Host Rx endpoint4 */
-#define                 USB_EP_NI4_RXCSR  0xffc03b0c   /* Control Status register for Host Rx endpoint4 */
-#define               USB_EP_NI4_RXCOUNT  0xffc03b10   /* Number of bytes received in endpoint4 FIFO */
-#define                USB_EP_NI4_TXTYPE  0xffc03b14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
-#define            USB_EP_NI4_TXINTERVAL  0xffc03b18   /* Sets the NAK response timeout on Endpoint4 */
-#define                USB_EP_NI4_RXTYPE  0xffc03b1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
-#define            USB_EP_NI4_RXINTERVAL  0xffc03b20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
-#define               USB_EP_NI4_TXCOUNT  0xffc03b28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
-
-/* USB Endpoint 5 Control Registers */
-
-#define                USB_EP_NI5_TXMAXP  0xffc03b40   /* Maximum packet size for Host Tx endpoint5 */
-#define                 USB_EP_NI5_TXCSR  0xffc03b44   /* Control Status register for endpoint5 */
-#define                USB_EP_NI5_RXMAXP  0xffc03b48   /* Maximum packet size for Host Rx endpoint5 */
-#define                 USB_EP_NI5_RXCSR  0xffc03b4c   /* Control Status register for Host Rx endpoint5 */
-#define               USB_EP_NI5_RXCOUNT  0xffc03b50   /* Number of bytes received in endpoint5 FIFO */
-#define                USB_EP_NI5_TXTYPE  0xffc03b54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
-#define            USB_EP_NI5_TXINTERVAL  0xffc03b58   /* Sets the NAK response timeout on Endpoint5 */
-#define                USB_EP_NI5_RXTYPE  0xffc03b5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
-#define            USB_EP_NI5_RXINTERVAL  0xffc03b60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
-#define               USB_EP_NI5_TXCOUNT  0xffc03b68   /* Number of bytes to be written to the endpoint5 Tx FIFO */
-
-/* USB Endpoint 6 Control Registers */
-
-#define                USB_EP_NI6_TXMAXP  0xffc03b80   /* Maximum packet size for Host Tx endpoint6 */
-#define                 USB_EP_NI6_TXCSR  0xffc03b84   /* Control Status register for endpoint6 */
-#define                USB_EP_NI6_RXMAXP  0xffc03b88   /* Maximum packet size for Host Rx endpoint6 */
-#define                 USB_EP_NI6_RXCSR  0xffc03b8c   /* Control Status register for Host Rx endpoint6 */
-#define               USB_EP_NI6_RXCOUNT  0xffc03b90   /* Number of bytes received in endpoint6 FIFO */
-#define                USB_EP_NI6_TXTYPE  0xffc03b94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
-#define            USB_EP_NI6_TXINTERVAL  0xffc03b98   /* Sets the NAK response timeout on Endpoint6 */
-#define                USB_EP_NI6_RXTYPE  0xffc03b9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
-#define            USB_EP_NI6_RXINTERVAL  0xffc03ba0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
-#define               USB_EP_NI6_TXCOUNT  0xffc03ba8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
-
-/* USB Endpoint 7 Control Registers */
-
-#define                USB_EP_NI7_TXMAXP  0xffc03bc0   /* Maximum packet size for Host Tx endpoint7 */
-#define                 USB_EP_NI7_TXCSR  0xffc03bc4   /* Control Status register for endpoint7 */
-#define                USB_EP_NI7_RXMAXP  0xffc03bc8   /* Maximum packet size for Host Rx endpoint7 */
-#define                 USB_EP_NI7_RXCSR  0xffc03bcc   /* Control Status register for Host Rx endpoint7 */
-#define               USB_EP_NI7_RXCOUNT  0xffc03bd0   /* Number of bytes received in endpoint7 FIFO */
-#define                USB_EP_NI7_TXTYPE  0xffc03bd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
-#define            USB_EP_NI7_TXINTERVAL  0xffc03bd8   /* Sets the NAK response timeout on Endpoint7 */
-#define                USB_EP_NI7_RXTYPE  0xffc03bdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define            USB_EP_NI7_RXINTERVAL  0xffc03bf0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define               USB_EP_NI7_TXCOUNT  0xffc03bf8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
-
-#define                USB_DMA_INTERRUPT  0xffc03c00   /* Indicates pending interrupts for the DMA channels */
-
-/* USB Channel 0 Config Registers */
-
-#define                  USB_DMA0CONTROL  0xffc03c04   /* DMA master channel 0 configuration */
-#define                  USB_DMA0ADDRLOW  0xffc03c08   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
-#define                 USB_DMA0ADDRHIGH  0xffc03c0c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
-#define                 USB_DMA0COUNTLOW  0xffc03c10   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define                USB_DMA0COUNTHIGH  0xffc03c14   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
-
-/* USB Channel 1 Config Registers */
-
-#define                  USB_DMA1CONTROL  0xffc03c24   /* DMA master channel 1 configuration */
-#define                  USB_DMA1ADDRLOW  0xffc03c28   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
-#define                 USB_DMA1ADDRHIGH  0xffc03c2c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
-#define                 USB_DMA1COUNTLOW  0xffc03c30   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define                USB_DMA1COUNTHIGH  0xffc03c34   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
-
-/* USB Channel 2 Config Registers */
-
-#define                  USB_DMA2CONTROL  0xffc03c44   /* DMA master channel 2 configuration */
-#define                  USB_DMA2ADDRLOW  0xffc03c48   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
-#define                 USB_DMA2ADDRHIGH  0xffc03c4c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
-#define                 USB_DMA2COUNTLOW  0xffc03c50   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define                USB_DMA2COUNTHIGH  0xffc03c54   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
-
-/* USB Channel 3 Config Registers */
-
-#define                  USB_DMA3CONTROL  0xffc03c64   /* DMA master channel 3 configuration */
-#define                  USB_DMA3ADDRLOW  0xffc03c68   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
-#define                 USB_DMA3ADDRHIGH  0xffc03c6c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
-#define                 USB_DMA3COUNTLOW  0xffc03c70   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define                USB_DMA3COUNTHIGH  0xffc03c74   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
-
-/* USB Channel 4 Config Registers */
-
-#define                  USB_DMA4CONTROL  0xffc03c84   /* DMA master channel 4 configuration */
-#define                  USB_DMA4ADDRLOW  0xffc03c88   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
-#define                 USB_DMA4ADDRHIGH  0xffc03c8c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
-#define                 USB_DMA4COUNTLOW  0xffc03c90   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define                USB_DMA4COUNTHIGH  0xffc03c94   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
-
-/* USB Channel 5 Config Registers */
-
-#define                  USB_DMA5CONTROL  0xffc03ca4   /* DMA master channel 5 configuration */
-#define                  USB_DMA5ADDRLOW  0xffc03ca8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
-#define                 USB_DMA5ADDRHIGH  0xffc03cac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
-#define                 USB_DMA5COUNTLOW  0xffc03cb0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define                USB_DMA5COUNTHIGH  0xffc03cb4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
-
-/* USB Channel 6 Config Registers */
-
-#define                  USB_DMA6CONTROL  0xffc03cc4   /* DMA master channel 6 configuration */
-#define                  USB_DMA6ADDRLOW  0xffc03cc8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
-#define                 USB_DMA6ADDRHIGH  0xffc03ccc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
-#define                 USB_DMA6COUNTLOW  0xffc03cd0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define                USB_DMA6COUNTHIGH  0xffc03cd4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
-
-/* USB Channel 7 Config Registers */
-
-#define                  USB_DMA7CONTROL  0xffc03ce4   /* DMA master channel 7 configuration */
-#define                  USB_DMA7ADDRLOW  0xffc03ce8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
-#define                 USB_DMA7ADDRHIGH  0xffc03cec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
-#define                 USB_DMA7COUNTLOW  0xffc03cf0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
-#define                USB_DMA7COUNTHIGH  0xffc03cf4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
-
-/* Bit masks for USB_FADDR */
-
-#define          FUNCTION_ADDRESS  0x7f       /* Function address */
-
-/* Bit masks for USB_POWER */
-
-#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
-#define          nENABLE_SUSPENDM  0x0       
-#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
-#define             nSUSPEND_MODE  0x0       
-#define               RESUME_MODE  0x4        /* DMA Mode */
-#define              nRESUME_MODE  0x0       
-#define                     RESET  0x8        /* Reset indicator */
-#define                    nRESET  0x0       
-#define                   HS_MODE  0x10       /* High Speed mode indicator */
-#define                  nHS_MODE  0x0       
-#define                 HS_ENABLE  0x20       /* high Speed Enable */
-#define                nHS_ENABLE  0x0       
-#define                 SOFT_CONN  0x40       /* Soft connect */
-#define                nSOFT_CONN  0x0       
-#define                ISO_UPDATE  0x80       /* Isochronous update */
-#define               nISO_UPDATE  0x0       
-
-/* Bit masks for USB_INTRTX */
-
-#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
-#define                   nEP0_TX  0x0       
-#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
-#define                   nEP1_TX  0x0       
-#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
-#define                   nEP2_TX  0x0       
-#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
-#define                   nEP3_TX  0x0       
-#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
-#define                   nEP4_TX  0x0       
-#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
-#define                   nEP5_TX  0x0       
-#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
-#define                   nEP6_TX  0x0       
-#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
-#define                   nEP7_TX  0x0       
-
-/* Bit masks for USB_INTRRX */
-
-#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
-#define                   nEP1_RX  0x0       
-#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
-#define                   nEP2_RX  0x0       
-#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
-#define                   nEP3_RX  0x0       
-#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
-#define                   nEP4_RX  0x0       
-#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
-#define                   nEP5_RX  0x0       
-#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
-#define                   nEP6_RX  0x0       
-#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
-#define                   nEP7_RX  0x0       
-
-/* Bit masks for USB_INTRTXE */
-
-#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
-#define                 nEP0_TX_E  0x0       
-#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
-#define                 nEP1_TX_E  0x0       
-#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
-#define                 nEP2_TX_E  0x0       
-#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
-#define                 nEP3_TX_E  0x0       
-#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
-#define                 nEP4_TX_E  0x0       
-#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
-#define                 nEP5_TX_E  0x0       
-#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
-#define                 nEP6_TX_E  0x0       
-#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
-#define                 nEP7_TX_E  0x0       
-
-/* Bit masks for USB_INTRRXE */
-
-#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
-#define                 nEP1_RX_E  0x0       
-#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
-#define                 nEP2_RX_E  0x0       
-#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
-#define                 nEP3_RX_E  0x0       
-#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
-#define                 nEP4_RX_E  0x0       
-#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
-#define                 nEP5_RX_E  0x0       
-#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
-#define                 nEP6_RX_E  0x0       
-#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
-#define                 nEP7_RX_E  0x0       
-
-/* Bit masks for USB_INTRUSB */
-
-#define                 SUSPEND_B  0x1        /* Suspend indicator */
-#define                nSUSPEND_B  0x0       
-#define                  RESUME_B  0x2        /* Resume indicator */
-#define                 nRESUME_B  0x0       
-#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
-#define         nRESET_OR_BABLE_B  0x0       
-#define                     SOF_B  0x8        /* Start of frame */
-#define                    nSOF_B  0x0       
-#define                    CONN_B  0x10       /* Connection indicator */
-#define                   nCONN_B  0x0       
-#define                  DISCON_B  0x20       /* Disconnect indicator */
-#define                 nDISCON_B  0x0       
-#define             SESSION_REQ_B  0x40       /* Session Request */
-#define            nSESSION_REQ_B  0x0       
-#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
-#define             nVBUS_ERROR_B  0x0       
-
-/* Bit masks for USB_INTRUSBE */
-
-#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
-#define               nSUSPEND_BE  0x0       
-#define                 RESUME_BE  0x2        /* Resume indicator int enable */
-#define                nRESUME_BE  0x0       
-#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
-#define        nRESET_OR_BABLE_BE  0x0       
-#define                    SOF_BE  0x8        /* Start of frame int enable */
-#define                   nSOF_BE  0x0       
-#define                   CONN_BE  0x10       /* Connection indicator int enable */
-#define                  nCONN_BE  0x0       
-#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
-#define                nDISCON_BE  0x0       
-#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
-#define           nSESSION_REQ_BE  0x0       
-#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
-#define            nVBUS_ERROR_BE  0x0       
-
-/* Bit masks for USB_FRAME */
-
-#define              FRAME_NUMBER  0x7ff      /* Frame number */
-
-/* Bit masks for USB_INDEX */
-
-#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
-
-/* Bit masks for USB_GLOBAL_CTL */
-
-#define                GLOBAL_ENA  0x1        /* enables USB module */
-#define               nGLOBAL_ENA  0x0       
-#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
-#define               nEP1_TX_ENA  0x0       
-#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
-#define               nEP2_TX_ENA  0x0       
-#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
-#define               nEP3_TX_ENA  0x0       
-#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
-#define               nEP4_TX_ENA  0x0       
-#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
-#define               nEP5_TX_ENA  0x0       
-#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
-#define               nEP6_TX_ENA  0x0       
-#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
-#define               nEP7_TX_ENA  0x0       
-#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
-#define               nEP1_RX_ENA  0x0       
-#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
-#define               nEP2_RX_ENA  0x0       
-#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
-#define               nEP3_RX_ENA  0x0       
-#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
-#define               nEP4_RX_ENA  0x0       
-#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
-#define               nEP5_RX_ENA  0x0       
-#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
-#define               nEP6_RX_ENA  0x0       
-#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
-#define               nEP7_RX_ENA  0x0       
-
-/* Bit masks for USB_OTG_DEV_CTL */
-
-#define                   SESSION  0x1        /* session indicator */
-#define                  nSESSION  0x0       
-#define                  HOST_REQ  0x2        /* Host negotiation request */
-#define                 nHOST_REQ  0x0       
-#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
-#define                nHOST_MODE  0x0       
-#define                     VBUS0  0x8        /* Vbus level indicator[0] */
-#define                    nVBUS0  0x0       
-#define                     VBUS1  0x10       /* Vbus level indicator[1] */
-#define                    nVBUS1  0x0       
-#define                     LSDEV  0x20       /* Low-speed indicator */
-#define                    nLSDEV  0x0       
-#define                     FSDEV  0x40       /* Full or High-speed indicator */
-#define                    nFSDEV  0x0       
-#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
-#define                 nB_DEVICE  0x0       
-
-/* Bit masks for USB_OTG_VBUS_IRQ */
-
-#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
-#define            nDRIVE_VBUS_ON  0x0       
-#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
-#define           nDRIVE_VBUS_OFF  0x0       
-#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
-#define          nCHRG_VBUS_START  0x0       
-#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
-#define            nCHRG_VBUS_END  0x0       
-#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
-#define       nDISCHRG_VBUS_START  0x0       
-#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
-#define         nDISCHRG_VBUS_END  0x0       
-
-/* Bit masks for USB_OTG_VBUS_MASK */
-
-#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
-#define        nDRIVE_VBUS_ON_ENA  0x0       
-#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
-#define       nDRIVE_VBUS_OFF_ENA  0x0       
-#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
-#define      nCHRG_VBUS_START_ENA  0x0       
-#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
-#define        nCHRG_VBUS_END_ENA  0x0       
-#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
-#define   nDISCHRG_VBUS_START_ENA  0x0       
-#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
-#define     nDISCHRG_VBUS_END_ENA  0x0       
-
-/* Bit masks for USB_CSR0 */
-
-#define                  RXPKTRDY  0x1        /* data packet receive indicator */
-#define                 nRXPKTRDY  0x0       
-#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
-#define                 nTXPKTRDY  0x0       
-#define                STALL_SENT  0x4        /* STALL handshake sent */
-#define               nSTALL_SENT  0x0       
-#define                   DATAEND  0x8        /* Data end indicator */
-#define                  nDATAEND  0x0       
-#define                  SETUPEND  0x10       /* Setup end */
-#define                 nSETUPEND  0x0       
-#define                 SENDSTALL  0x20       /* Send STALL handshake */
-#define                nSENDSTALL  0x0       
-#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
-#define        nSERVICED_RXPKTRDY  0x0       
-#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
-#define        nSERVICED_SETUPEND  0x0       
-#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
-#define                nFLUSHFIFO  0x0       
-#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
-#define         nSTALL_RECEIVED_H  0x0       
-#define                SETUPPKT_H  0x8        /* send Setup token host mode */
-#define               nSETUPPKT_H  0x0       
-#define                   ERROR_H  0x10       /* timeout error indicator host mode */
-#define                  nERROR_H  0x0       
-#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
-#define                 nREQPKT_H  0x0       
-#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
-#define              nSTATUSPKT_H  0x0       
-#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
-#define            nNAK_TIMEOUT_H  0x0       
-
-/* Bit masks for USB_COUNT0 */
-
-#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
-
-/* Bit masks for USB_NAKLIMIT0 */
-
-#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
-
-/* Bit masks for USB_TX_MAX_PACKET */
-
-#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
-
-/* Bit masks for USB_RX_MAX_PACKET */
-
-#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
-
-/* Bit masks for USB_TXCSR */
-
-#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
-#define               nTXPKTRDY_T  0x0       
-#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
-#define         nFIFO_NOT_EMPTY_T  0x0       
-#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
-#define               nUNDERRUN_T  0x0       
-#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
-#define              nFLUSHFIFO_T  0x0       
-#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
-#define             nSTALL_SEND_T  0x0       
-#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
-#define             nSTALL_SENT_T  0x0       
-#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_T  0x0       
-#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
-#define               nINCOMPTX_T  0x0       
-#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_T  0x0       
-#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
-#define       nFORCE_DATATOGGLE_T  0x0       
-#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_T  0x0       
-#define                     ISO_T  0x4000     /* enable Isochronous transfers */
-#define                    nISO_T  0x0       
-#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
-#define                nAUTOSET_T  0x0       
-#define                  ERROR_TH  0x4        /* error condition host mode */
-#define                 nERROR_TH  0x0       
-#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_TH  0x0       
-#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
-#define           nNAK_TIMEOUT_TH  0x0       
-
-/* Bit masks for USB_TXCOUNT */
-
-#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* Bit masks for USB_RXCSR */
-
-#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
-#define               nRXPKTRDY_R  0x0       
-#define               FIFO_FULL_R  0x2        /* FIFO not empty */
-#define              nFIFO_FULL_R  0x0       
-#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
-#define                nOVERRUN_R  0x0       
-#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
-#define              nDATAERROR_R  0x0       
-#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
-#define              nFLUSHFIFO_R  0x0       
-#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
-#define             nSTALL_SEND_R  0x0       
-#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
-#define             nSTALL_SENT_R  0x0       
-#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_R  0x0       
-#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
-#define               nINCOMPRX_R  0x0       
-#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_R  0x0       
-#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
-#define                nDISNYET_R  0x0       
-#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_R  0x0       
-#define                     ISO_R  0x4000     /* enable Isochronous transfers */
-#define                    nISO_R  0x0       
-#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
-#define              nAUTOCLEAR_R  0x0       
-#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
-#define                 nERROR_RH  0x0       
-#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
-#define                nREQPKT_RH  0x0       
-#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_RH  0x0       
-#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
-#define              nINCOMPRX_RH  0x0       
-#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
-#define            nDMAREQMODE_RH  0x0       
-#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
-#define               nAUTOREQ_RH  0x0       
-
-/* Bit masks for USB_RXCOUNT */
-
-#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
-
-/* Bit masks for USB_TXTYPE */
-
-#define            TARGET_EP_NO_T  0xf        /* EP number */
-#define                PROTOCOL_T  0xc        /* transfer type */
-
-/* Bit masks for USB_TXINTERVAL */
-
-#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
-
-/* Bit masks for USB_RXTYPE */
-
-#define            TARGET_EP_NO_R  0xf        /* EP number */
-#define                PROTOCOL_R  0xc        /* transfer type */
-
-/* Bit masks for USB_RXINTERVAL */
-
-#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
-
-/* Bit masks for USB_DMA_INTERRUPT */
-
-#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
-#define                 nDMA0_INT  0x0       
-#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
-#define                 nDMA1_INT  0x0       
-#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
-#define                 nDMA2_INT  0x0       
-#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
-#define                 nDMA3_INT  0x0       
-#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
-#define                 nDMA4_INT  0x0       
-#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
-#define                 nDMA5_INT  0x0       
-#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
-#define                 nDMA6_INT  0x0       
-#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
-#define                 nDMA7_INT  0x0       
-
-/* Bit masks for USB_DMAxCONTROL */
-
-#define                   DMA_ENA  0x1        /* DMA enable */
-#define                  nDMA_ENA  0x0       
-#define                 DIRECTION  0x2        /* direction of DMA transfer */
-#define                nDIRECTION  0x0       
-#define                      MODE  0x4        /* DMA Bus error */
-#define                     nMODE  0x0       
-#define                   INT_ENA  0x8        /* Interrupt enable */
-#define                  nINT_ENA  0x0       
-#define                     EPNUM  0xf0       /* EP number */
-#define                  BUSERROR  0x100      /* DMA Bus error */
-#define                 nBUSERROR  0x0       
-
-/* Bit masks for USB_DMAxADDRHIGH */
-
-#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxADDRLOW */
-
-#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTHIGH */
-
-#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTLOW */
-
-#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
-
 #endif /* _DEF_BF527_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index b9dbb73..8b18b53 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -586,58 +586,6 @@
 **				modifier UNLESS the lower order bits are saved and ORed back in when
 **				the macro is used.
 *************************************************************************************/
-/*
-** ********************* PLL AND RESET MASKS ****************************************/
-/* PLL_CTL Masks																	*/
-#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2					*/
-#define PLL_OFF			0x0002	/* PLL Not Powered									*/
-#define STOPCK			0x0008	/* Core Clock Off									*/
-#define PDWN			0x0020	/* Enter Deep Sleep Mode							*/
-#define	IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches			*/
-#define	OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals			*/
-#define BYPASS			0x0100	/* Bypass the PLL									*/
-#define	MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors			*/
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL		*/
-
-/* PLL_DIV Masks														*/
-#define SSEL			0x000F	/* System Select						*/
-#define	CSEL			0x0030	/* Core Select							*/
-#define CSEL_DIV1		0x0000	/* 		CCLK = VCO / 1					*/
-#define CSEL_DIV2		0x0010	/* 		CCLK = VCO / 2					*/
-#define	CSEL_DIV4		0x0020	/* 		CCLK = VCO / 4					*/
-#define	CSEL_DIV8		0x0030	/* 		CCLK = VCO / 8					*/
-/* PLL_DIV Macros														*/
-#define SET_SSEL(x)		((x)&0xF)		/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
-
-/* VR_CTL Masks	*/
-#define	FREQ			0x3000	/* Switching Oscillator Frequency For Regulator	*/
-#define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
-
-#define	VLEV			0x00F0	/* Internal Voltage Level					*/
-#define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
-#define	VLEV_090		0x0070	/* 		VLEV = 0.90 V (-5% - +10% Accuracy)	*/
-#define	VLEV_095		0x0080	/* 		VLEV = 0.95 V (-5% - +10% Accuracy)	*/
-#define	VLEV_100		0x0090	/* 		VLEV = 1.00 V (-5% - +10% Accuracy)	*/
-#define	VLEV_105		0x00A0	/* 		VLEV = 1.05 V (-5% - +10% Accuracy)	*/
-#define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
-#define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
-#define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
-#define	VLEV_125		0x00E0	/* 		VLEV = 1.25 V (-5% - +10% Accuracy)	*/
-#define	VLEV_130		0x00F0	/* 		VLEV = 1.30 V (-5% - +10% Accuracy)	*/
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
-#define	USBWE			0x0200	/* Enable USB Wakeup From Hibernate			*/
-#define	PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate			*/
-#define	CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
-#define	PHYCLKOE		CLKBUFOE	/* Alternative legacy name for the above */
-#define	SCKELOW		0x8000	/* Enable Drive CKE Low During Reset		*/
-
-/* PLL_STAT Masks																	*/
-#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled	*/
-#define	FULL_ON				0x0002	/* Processor In Full On Mode					*/
-#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled	*/
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached					*/
 
 /* CHIPID Masks */
 #define CHIPID_VERSION         0xF0000000
@@ -757,66 +705,6 @@
 #define IWR_DISABLE(x)	(0xFFFFFFFF ^ (1 << ((x)&0x1F))) 	/* Wakeup Disable Peripheral #x		*/
 
 
-/* ********* WATCHDOG TIMER MASKS ******************** */
-
-/* Watchdog Timer WDOG_CTL Register Masks */
-
-#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
-#define WDEV_RESET 0x0000 /* generate reset event on roll over */
-#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
-#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
-#define WDEV_NONE 0x0006 /* no event on roll over */
-#define WDEN 0x0FF0 /* enable watchdog */
-#define WDDIS 0x0AD0 /* disable watchdog */
-#define WDRO 0x8000 /* watchdog rolled over latch */
-
-/* depreciated WDOG_CTL Register Masks for legacy code */
-
-
-#define ICTL WDEV
-#define ENABLE_RESET WDEV_RESET
-#define WDOG_RESET WDEV_RESET
-#define ENABLE_NMI WDEV_NMI
-#define WDOG_NMI WDEV_NMI
-#define ENABLE_GPI WDEV_GPI
-#define WDOG_GPI WDEV_GPI
-#define DISABLE_EVT WDEV_NONE
-#define WDOG_NONE WDEV_NONE
-
-#define TMR_EN WDEN
-#define TMR_DIS WDDIS
-#define TRO WDRO
-#define ICTL_P0 0x01
- #define ICTL_P1 0x02
-#define TRO_P 0x0F
-
-
-
-/* ***************  REAL TIME CLOCK MASKS  **************************/
-/* RTC_STAT and RTC_ALARM Masks										*/
-#define	RTC_SEC				0x0000003F	/* Real-Time Clock Seconds	*/
-#define	RTC_MIN				0x00000FC0	/* Real-Time Clock Minutes	*/
-#define	RTC_HR				0x0001F000	/* Real-Time Clock Hours	*/
-#define	RTC_DAY				0xFFFE0000	/* Real-Time Clock Days		*/
-
-/* RTC_ALARM Macro			z=day		y=hr	x=min	w=sec		*/
-#define SET_ALARM(z,y,x,w)	((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
-
-/* RTC_ICTL and RTC_ISTAT Masks																		*/
-#define	STOPWATCH			0x0001		/* Stopwatch Interrupt Enable								*/
-#define	ALARM				0x0002		/* Alarm Interrupt Enable									*/
-#define	SECOND				0x0004		/* Seconds (1 Hz) Interrupt Enable							*/
-#define	MINUTE				0x0008		/* Minutes Interrupt Enable									*/
-#define	HOUR				0x0010		/* Hours Interrupt Enable									*/
-#define	DAY					0x0020		/* 24 Hours (Days) Interrupt Enable							*/
-#define	DAY_ALARM			0x0040		/* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable	*/
-#define	WRITE_PENDING		0x4000		/* Write Pending Status										*/
-#define	WRITE_COMPLETE		0x8000		/* Write Complete Interrupt Enable							*/
-
-/* RTC_FAST / RTC_PREN Mask												*/
-#define PREN				0x0001	/* Enable Prescaler, RTC Runs @1 Hz	*/
-
-
 /* ************** UART CONTROLLER MASKS *************************/
 /* UARTx_LCR Masks												*/
 #define WLS(x)		(((x)-5) & 0x03)	/* Word Length Select */
@@ -1381,33 +1269,6 @@
 
 
 /* **************************  DMA CONTROLLER MASKS  ********************************/
-/* DMAx_CONFIG, MDMA_yy_CONFIG Masks												*/
-#define DMAEN			0x0001		/* DMA Channel Enable							*/
-#define WNR				0x0002		/* Channel Direction (W/R*)						*/
-#define WDSIZE_8		0x0000		/* Transfer Word Size = 8						*/
-#define WDSIZE_16		0x0004		/* Transfer Word Size = 16						*/
-#define WDSIZE_32		0x0008		/* Transfer Word Size = 32						*/
-#define DMA2D			0x0010		/* DMA Mode (2D/1D*)							*/
-#define RESTART			0x0020		/* DMA Buffer Clear								*/
-#define DI_SEL			0x0040		/* Data Interrupt Timing Select					*/
-#define DI_EN			0x0080		/* Data Interrupt Enable						*/
-#define NDSIZE_0		0x0000		/* Next Descriptor Size = 0 (Stop/Autobuffer)	*/
-#define NDSIZE_1		0x0100		/* Next Descriptor Size = 1						*/
-#define NDSIZE_2		0x0200		/* Next Descriptor Size = 2						*/
-#define NDSIZE_3		0x0300		/* Next Descriptor Size = 3						*/
-#define NDSIZE_4		0x0400		/* Next Descriptor Size = 4						*/
-#define NDSIZE_5		0x0500		/* Next Descriptor Size = 5						*/
-#define NDSIZE_6		0x0600		/* Next Descriptor Size = 6						*/
-#define NDSIZE_7		0x0700		/* Next Descriptor Size = 7						*/
-#define NDSIZE_8		0x0800		/* Next Descriptor Size = 8						*/
-#define NDSIZE_9		0x0900		/* Next Descriptor Size = 9						*/
-#define NDSIZE	        	0x0900	/* Next Descriptor Size */
-#define DMAFLOW	        	0x7000	/* Flow Control */
-#define DMAFLOW_STOP		0x0000		/* Stop Mode									*/
-#define DMAFLOW_AUTO		0x1000		/* Autobuffer Mode								*/
-#define DMAFLOW_ARRAY		0x4000		/* Descriptor Array Mode						*/
-#define DMAFLOW_SMALL		0x6000		/* Small Model Descriptor List Mode				*/
-#define DMAFLOW_LARGE		0x7000		/* Large Model Descriptor List Mode				*/
 
 /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks								*/
 #define CTYPE			0x0040	/* DMA Channel Type Indicator (Memory/Peripheral*)	*/
@@ -1425,13 +1286,6 @@
 #define	PMAP_UART1RX	0xA000	/* 		UART1 Port Receive DMA						*/
 #define	PMAP_UART1TX	0xB000	/* 		UART1 Port Transmit DMA						*/
 
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks						*/
-#define DMA_DONE		0x0001	/* DMA Completion Interrupt Status	*/
-#define DMA_ERR			0x0002	/* DMA Error Interrupt Status		*/
-#define DFETCH			0x0004	/* DMA Descriptor Fetch Indicator	*/
-#define DMA_RUN			0x0008	/* DMA Channel Running Indicator	*/
-
-
 /*  ************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
 /*  PPI_CONTROL Masks													*/
 #define PORT_EN			0x0001		/* PPI Port Enable					*/
@@ -1843,46 +1697,6 @@
 #define BNDMODE_CAPT     0x2000  /* boundary capture mode */
 #define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
 
-/* Bit masks for OTP_CONTROL */
-
-#define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
-#define                      FIEN  0x800      /* OTP/Fuse Interrupt Enable */
-#define                     nFIEN  0x0
-#define                  FTESTDEC  0x1000     /* OTP/Fuse Test Decoder */
-#define                 nFTESTDEC  0x0
-#define                   FWRTEST  0x2000     /* OTP/Fuse Write Test */
-#define                  nFWRTEST  0x0
-#define                     FRDEN  0x4000     /* OTP/Fuse Read Enable */
-#define                    nFRDEN  0x0
-#define                     FWREN  0x8000     /* OTP/Fuse Write Enable */
-#define                    nFWREN  0x0
-
-/* Bit masks for OTP_BEN */
-
-#define                      FBEN  0xffff     /* OTP/Fuse Byte Enable */
-
-/* Bit masks for OTP_STATUS */
-
-#define                     FCOMP  0x1        /* OTP/Fuse Access Complete */
-#define                    nFCOMP  0x0
-#define                    FERROR  0x2        /* OTP/Fuse Access Error */
-#define                   nFERROR  0x0
-#define                  MMRGLOAD  0x10       /* Memory Mapped Register Gasket Load */
-#define                 nMMRGLOAD  0x0
-#define                  MMRGLOCK  0x20       /* Memory Mapped Register Gasket Lock */
-#define                 nMMRGLOCK  0x0
-#define                    FPGMEN  0x40       /* OTP/Fuse Program Enable */
-#define                   nFPGMEN  0x0
-
-/* Bit masks for OTP_TIMING */
-
-#define                   USECDIV  0xff       /* Micro Second Divider */
-#define                   READACC  0x7f00     /* Read Access Time */
-#define                   CPUMPRL  0x38000    /* Charge Pump Release Time */
-#define                   CPUMPSU  0xc0000    /* Charge Pump Setup Time */
-#define                   CPUMPHD  0xf00000   /* Charge Pump Hold Time */
-#define                   PGMTIME  0xff000000 /* Program Time */
-
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 43f43a0..4adceb0 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -166,7 +166,6 @@
 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
-	.ctl_reg = 0x1000,
 	.enable_dma = 1,         /* use dma transfer with this chip*/
 	.bits_per_word = 16,
 };
@@ -174,7 +173,6 @@
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
-	.ctl_reg = 0x1000,
 	.enable_dma = 0,
 	.bits_per_word = 16,
 };
@@ -258,12 +256,6 @@
 };
 #endif  /* spi master and devices */
 
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
-	.name = "bf537-fb",
-};
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 	{
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index 644be5e..8ec42ba 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -20,6 +20,7 @@
 #endif
 #include <asm/irq.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -107,20 +108,6 @@
 
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
-/*
- * CPOL (Clock Polarity)
- *  0 - Active high SCK
- *  1 - Active low SCK
- *  CPHA (Clock Phase) Selects transfer format and operation mode
- *  0 - SCLK toggles from middle of the first data bit, slave select
- *      pins controlled by hardware.
- *  1 - SCLK toggles from beginning of first data bit, slave select
- *      pins controller by user software.
- * 	.ctl_reg = 0x1c00,		 *  CPOL=1,CPHA=1,Sandisk 1G work
- * NO NO	.ctl_reg = 0x1800,		 *  CPOL=1,CPHA=0
- * NO NO	.ctl_reg = 0x1400,		 *  CPOL=0,CPHA=1
- */
-	.ctl_reg = 0x1000,		/* CPOL=0,CPHA=0,Sandisk 1G work */
 	.enable_dma = 0,		/* if 1 - block!!! */
 	.bits_per_word = 8,
 };
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 82f70ef..6d68dcf 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -321,12 +321,6 @@
 };
 #endif  /* spi master and devices */
 
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
-	.name = "bf537-fb",
-};
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 	{
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 02b328e..e9ff491 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -370,72 +370,6 @@
 /* System MMR Register Bits */
 /******************************************************************************* */
 
-/* ********************* PLL AND RESET MASKS ************************ */
-
-/* PLL_CTL Masks */
-#define PLL_CLKIN			0x0000  /* Pass CLKIN to PLL */
-#define PLL_CLKIN_DIV2			0x0001  /* Pass CLKIN/2 to PLL */
-#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2					*/
-#define PLL_OFF				0x0002  /* Shut off PLL clocks */
-#define STOPCK_OFF			0x0008  /* Core clock off */
-#define STOPCK				0x0008	/* Core Clock Off									*/
-#define PDWN				0x0020  /* Put the PLL in a Deep Sleep state */
-#if !defined(__ADSPBF538__)
-/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */
-# define IN_DELAY        0x0040  /* Add 200ps Delay To EBIU Input Latches */
-# define OUT_DELAY       0x0080  /* Add 200ps Delay To EBIU Output Signals */
-#endif
-#define BYPASS				0x0100  /* Bypass the PLL */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL		*/
-
-/* PLL_DIV Masks */
-#define SSEL				0x000F	/* System Select						*/
-#define	CSEL				0x0030	/* Core Select							*/
-
-#define SCLK_DIV(x)  (x)	/* SCLK = VCO / x */
-
-#define CCLK_DIV1              0x00000000	/* CCLK = VCO / 1 */
-#define CCLK_DIV2              0x00000010	/* CCLK = VCO / 2 */
-#define CCLK_DIV4              0x00000020	/* CCLK = VCO / 4 */
-#define CCLK_DIV8              0x00000030	/* CCLK = VCO / 8 */
-/* PLL_DIV Macros														*/
-#define SET_SSEL(x)			((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
-
-/* PLL_STAT Masks																	*/
-#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled    */
-#define	FULL_ON				0x0002	/* Processor In Full On Mode                                    */
-#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled   */
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached                                 */
-
-/* VR_CTL Masks																	*/
-#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
-#define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
-#define	FREQ_333		0x0001	/* 		Switching Frequency Is 333 kHz			*/
-#define	FREQ_667		0x0002	/* 		Switching Frequency Is 667 kHz			*/
-#define	FREQ_1000		0x0003	/* 		Switching Frequency Is 1 MHz			*/
-
-#define GAIN			0x000C	/* Voltage Level Gain	*/
-#define	GAIN_5			0x0000	/* 		GAIN = 5		*/
-#define	GAIN_10			0x0004	/* 		GAIN = 10		*/
-#define	GAIN_20			0x0008	/* 		GAIN = 20		*/
-#define	GAIN_50			0x000C	/* 		GAIN = 50		*/
-
-#define	VLEV			0x00F0	/* Internal Voltage Level					*/
-#define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
-#define	VLEV_090		0x0070	/* 		VLEV = 0.90 V (-5% - +10% Accuracy)	*/
-#define	VLEV_095		0x0080	/* 		VLEV = 0.95 V (-5% - +10% Accuracy)	*/
-#define	VLEV_100		0x0090	/* 		VLEV = 1.00 V (-5% - +10% Accuracy)	*/
-#define	VLEV_105		0x00A0	/* 		VLEV = 1.05 V (-5% - +10% Accuracy)	*/
-#define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
-#define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
-#define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
-#define	VLEV_125		0x00E0	/*              VLEV = 1.25 V (-5% - +10% Accuracy)     */
-#define	VLEV_130		0x00F0	/*              VLEV = 1.30 V (-5% - +10% Accuracy)     */
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
-#define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
-
 /* CHIPID Masks */
 #define CHIPID_VERSION         0xF0000000
 #define CHIPID_FAMILY          0x0FFFF000
@@ -703,54 +637,7 @@
 
 /* **********  DMA CONTROLLER MASKS  *********************8 */
 
-/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */
-#define DMAEN	        0x00000001	/* Channel Enable */
-#define WNR	   	0x00000002	/* Channel Direction (W/R*) */
-#define WDSIZE_8	0x00000000	/* Word Size 8 bits */
-#define WDSIZE_16	0x00000004	/* Word Size 16 bits */
-#define WDSIZE_32	0x00000008	/* Word Size 32 bits */
-#define DMA2D	        0x00000010	/* 2D/1D* Mode */
-#define RESTART         0x00000020	/* Restart */
-#define DI_SEL	        0x00000040	/* Data Interrupt Select */
-#define DI_EN	        0x00000080	/* Data Interrupt Enable */
-#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer)   */
-#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1                                             */
-#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2                                             */
-#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3                                             */
-#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4                                             */
-#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5                                             */
-#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6                                             */
-#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7                                             */
-#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8                                             */
-#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9                                             */
-#define NDSIZE	        0x00000900	/* Next Descriptor Size */
-#define DMAFLOW	        0x00007000	/* Flow Control */
-#define DMAFLOW_STOP		0x0000	/* Stop Mode */
-#define DMAFLOW_AUTO		0x1000	/* Autobuffer Mode */
-#define DMAFLOW_ARRAY		0x4000	/* Descriptor Array Mode */
-#define DMAFLOW_SMALL		0x6000	/* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE		0x7000	/* Large Model Descriptor List Mode */
-
-#define DMAEN_P	            	0	/* Channel Enable */
-#define WNR_P	            	1	/* Channel Direction (W/R*) */
-#define DMA2D_P	        	4	/* 2D/1D* Mode */
-#define RESTART_P	      	5	/* Restart */
-#define DI_SEL_P	     	6	/* Data Interrupt Select */
-#define DI_EN_P	            	7	/* Data Interrupt Enable */
-
-/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
-
-#define DMA_DONE		0x00000001	/* DMA Done Indicator */
-#define DMA_ERR	        	0x00000002	/* DMA Error Indicator */
-#define DFETCH	            	0x00000004	/* Descriptor Fetch Indicator */
-#define DMA_RUN	            	0x00000008	/* DMA Running Indicator */
-
-#define DMA_DONE_P	    	0	/* DMA Done Indicator */
-#define DMA_ERR_P     		1	/* DMA Error Indicator */
-#define DFETCH_P     		2	/* Descriptor Fetch Indicator */
-#define DMA_RUN_P     		3	/* DMA Running Indicator */
-
-/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
 
 #define CTYPE	            0x00000040	/* DMA Channel Type Indicator */
 #define CTYPE_P             6	/* DMA Channel Type Indicator BIT POSITION */
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 9ba29046..4e0afda 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -13,9 +13,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -147,45 +144,6 @@
 };
 #endif
 
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
-	{
-		.start = 0x20360000,
-		.end = 0x20360000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20360004,
-		.end = 0x20360004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct isp1362_platform_data isp1362_priv = {
-	.sel15Kres = 1,
-	.clknotstop = 0,
-	.oc_enable = 0,
-	.int_act_high = 0,
-	.int_edge_triggered = 0,
-	.remote_wakeup_connected = 0,
-	.no_power_switching = 1,
-	.power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
-	.name = "isp1362-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &isp1362_priv,
-	},
-	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
-	.resource = isp1362_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
@@ -492,10 +450,6 @@
 	&sl811_hcd_device,
 #endif
 
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-	&isp1362_hcd_device,
-#endif
-
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	&smc91x_device,
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index c46baa5..ac9b52e 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -9,6 +9,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -25,6 +26,8 @@
 #include <linux/i2c.h>
 #include <linux/usb/sl811.h>
 #include <linux/spi/mmc_spi.h>
+#include <linux/leds.h>
+#include <linux/input.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
@@ -65,7 +68,7 @@
 };
 
 static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760-hcd",
+	.name           = "isp1760",
 	.id             = 0,
 	.dev = {
 		.platform_data = &isp1760_priv,
@@ -76,7 +79,6 @@
 #endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-#include <linux/input.h>
 #include <linux/gpio_keys.h>
 
 static struct gpio_keys_button bfin_gpio_keys_table[] = {
@@ -195,28 +197,6 @@
 };
 #endif
 
-#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
-static struct resource ax88180_resources[] = {
-	[0] = {
-		.start	= 0x20300000,
-		.end	= 0x20300000 + 0x8000,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PF7,
-		.end	= IRQ_PF7,
-		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
-	},
-};
-
-static struct platform_device ax88180_device = {
-	.name		= "ax88180",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ax88180_resources),
-	.resource	= ax88180_resources,
-};
-#endif
-
 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
 static struct resource sl811_hcd_resources[] = {
 	{
@@ -272,8 +252,8 @@
 		.end = 0x20360004,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+		.start = IRQ_PF3,
+		.end = IRQ_PF3,
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
@@ -300,6 +280,44 @@
 };
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+unsigned short bfin_can_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+	{
+		.start = 0xFFC02A00,
+		.end = 0xFFC02FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN_RX,
+		.end = IRQ_CAN_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_TX,
+		.end = IRQ_CAN_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_ERROR,
+		.end = IRQ_CAN_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can_device = {
+	.name = "bfin_can",
+	.num_resources = ARRAY_SIZE(bfin_can_resources),
+	.resource = bfin_can_resources,
+	.dev = {
+		.platform_data = &bfin_can_peripherals, /* Passed to driver */
+	},
+};
+#endif
+
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
@@ -514,15 +532,14 @@
 };
 #endif
 
-#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
-#include <linux/input.h>
+#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
 #include <linux/input/ad714x.h>
 static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
 };
 
-static struct ad714x_slider_plat slider_plat[] = {
+static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
 	{
 		.start_stage = 0,
 		.end_stage = 7,
@@ -530,7 +547,7 @@
 	},
 };
 
-static struct ad714x_button_plat button_plat[] = {
+static struct ad714x_button_plat ad7147_spi_button_plat[] = {
 	{
 		.keycode = BTN_FORWARD,
 		.l_mask = 0,
@@ -557,11 +574,11 @@
 		.h_mask = 0x400,
 	},
 };
-static struct ad714x_platform_data ad7147_platfrom_data = {
+static struct ad714x_platform_data ad7147_spi_platform_data = {
 	.slider_num = 1,
 	.button_num = 5,
-	.slider = slider_plat,
-	.button = button_plat,
+	.slider = ad7147_spi_slider_plat,
+	.button = ad7147_spi_button_plat,
 	.stage_cfg_reg =  {
 		{0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
 		{0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
@@ -580,10 +597,9 @@
 };
 #endif
 
-#if defined(CONFIG_INPUT_EVAL_AD7142EB)
-#include <linux/input.h>
+#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
 #include <linux/input/ad714x.h>
-static struct ad714x_button_plat button_plat[] = {
+static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
 	{
 		.keycode = BTN_1,
 		.l_mask = 0,
@@ -605,9 +621,9 @@
 		.h_mask = 0x8,
 	},
 };
-static struct ad714x_platform_data ad7142_platfrom_data = {
+static struct ad714x_platform_data ad7142_i2c_platform_data = {
 	.button_num = 4,
-	.button = button_plat,
+	.button = ad7142_i2c_button_plat,
 	.stage_cfg_reg =  {
 		/* fixme: figure out right setting for all comoponent according
 		 * to hardware feature of EVAL-AD7142EB board */
@@ -696,8 +712,7 @@
 #endif
 
 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
-#include <linux/input.h>
-#include <linux/spi/adxl34x.h>
+#include <linux/input/adxl34x.h>
 static const struct adxl34x_platform_data adxl34x_info = {
 	.x_axis_offset = 0,
 	.y_axis_offset = 0,
@@ -721,9 +736,7 @@
 	.ev_code_y = ABS_Y,		/* EV_REL */
 	.ev_code_z = ABS_Z,		/* EV_REL */
 
-	.ev_code_tap_x = BTN_TOUCH,		/* EV_KEY */
-	.ev_code_tap_y = BTN_TOUCH,		/* EV_KEY */
-	.ev_code_tap_z = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
 
 /*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
 /*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
@@ -761,6 +774,47 @@
 };
 #endif
 
+#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
+static struct bfin5xx_spi_chip adf7021_spi_chip_info = {
+	.bits_per_word = 16,
+	.cs_gpio = GPIO_PF10,
+};
+
+#include <linux/spi/adf702x.h>
+#define TXREG 0x0160A470
+static const u32 adf7021_regs[] = {
+	0x09608FA0,
+	0x00575011,
+	0x00A7F092,
+	0x2B141563,
+	0x81F29E94,
+	0x00003155,
+	0x050A4F66,
+	0x00000007,
+	0x00000008,
+	0x000231E9,
+	0x3296354A,
+	0x891A2B3B,
+	0x00000D9C,
+	0x0000000D,
+	0x0000000E,
+	0x0000000F,
+};
+
+static struct adf702x_platform_data adf7021_platform_data = {
+	.regs_base = (void *)SPORT1_TCR1,
+	.dma_ch_rx = CH_SPORT1_RX,
+	.dma_ch_tx = CH_SPORT1_TX,
+	.irq_sport_err = IRQ_SPORT1_ERROR,
+	.gpio_int_rfs = GPIO_PF8,
+	.pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI,
+			P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0},
+	.adf702x_model = MODEL_ADF7021,
+	.adf702x_regs = adf7021_regs,
+	.tx_reg = TXREG,
+};
+#endif
+
 #if defined(CONFIG_MTD_DATAFLASH) \
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
 
@@ -794,6 +848,13 @@
 };
 #endif
 
+#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -855,7 +916,7 @@
 	},
 #endif
 
-#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
+#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
 	{
 		.modalias = "ad714x_captouch",
 		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
@@ -863,7 +924,7 @@
 		.bus_num = 0,
 		.chip_select = 5,
 		.mode = SPI_MODE_3,
-		.platform_data = &ad7147_platfrom_data,
+		.platform_data = &ad7147_spi_platform_data,
 		.controller_data = &ad7147_spi_chip_info,
 	},
 #endif
@@ -932,6 +993,30 @@
 		.mode = SPI_MODE_0,
 	},
 #endif
+#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+	{
+		.modalias	= "adxl34x",
+		.platform_data	= &adxl34x_info,
+		.irq		= IRQ_PF6,
+		.max_speed_hz	= 5000000,    /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select	= 2,
+		.controller_data = &spi_adxl34x_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
+	{
+		.modalias = "adf702x",
+		.max_speed_hz = 16000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 0,	/* GPIO controlled SSEL */
+		.controller_data = &adf7021_spi_chip_info,
+		.platform_data = &adf7021_platform_data,
+		.mode = SPI_MODE_0,
+	},
+#endif
+
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -1175,7 +1260,6 @@
 #endif
 
 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
-#include <linux/input.h>
 #include <linux/i2c/adp5588.h>
 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
 	[0]	 = KEY_GRAVE,
@@ -1268,35 +1352,33 @@
 	 *  ADP5520/5501 Backlight Data
 	 */
 
-static struct adp5520_backlight_platfrom_data adp5520_backlight_data = {
-	.fade_in 		= FADE_T_1200ms,
-	.fade_out 		= FADE_T_1200ms,
-	.fade_led_law 		= BL_LAW_LINEAR,
-	.en_ambl_sens 		= 1,
-	.abml_filt 		= BL_AMBL_FILT_640ms,
-	.l1_daylight_max 	= BL_CUR_mA(15),
-	.l1_daylight_dim 	= BL_CUR_mA(0),
-	.l2_office_max 		= BL_CUR_mA(7),
-	.l2_office_dim 		= BL_CUR_mA(0),
-	.l3_dark_max 		= BL_CUR_mA(3),
-	.l3_dark_dim 		= BL_CUR_mA(0),
-	.l2_trip 		= L2_COMP_CURR_uA(700),
-	.l2_hyst 		= L2_COMP_CURR_uA(50),
-	.l3_trip 		= L3_COMP_CURR_uA(80),
-	.l3_hyst 		= L3_COMP_CURR_uA(20),
+static struct adp5520_backlight_platform_data adp5520_backlight_data = {
+	.fade_in		= ADP5520_FADE_T_1200ms,
+	.fade_out		= ADP5520_FADE_T_1200ms,
+	.fade_led_law		= ADP5520_BL_LAW_LINEAR,
+	.en_ambl_sens		= 1,
+	.abml_filt		= ADP5520_BL_AMBL_FILT_640ms,
+	.l1_daylight_max	= ADP5520_BL_CUR_mA(15),
+	.l1_daylight_dim	= ADP5520_BL_CUR_mA(0),
+	.l2_office_max		= ADP5520_BL_CUR_mA(7),
+	.l2_office_dim		= ADP5520_BL_CUR_mA(0),
+	.l3_dark_max		= ADP5520_BL_CUR_mA(3),
+	.l3_dark_dim		= ADP5520_BL_CUR_mA(0),
+	.l2_trip		= ADP5520_L2_COMP_CURR_uA(700),
+	.l2_hyst		= ADP5520_L2_COMP_CURR_uA(50),
+	.l3_trip		= ADP5520_L3_COMP_CURR_uA(80),
+	.l3_hyst		= ADP5520_L3_COMP_CURR_uA(20),
 };
 
 	/*
 	 *  ADP5520/5501 LEDs Data
 	 */
 
-#include <linux/leds.h>
-
 static struct led_info adp5520_leds[] = {
 	{
 		.name = "adp5520-led1",
 		.default_trigger = "none",
-		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms,
+		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
 	},
 #ifdef ADP5520_EN_ALL_LEDS
 	{
@@ -1312,51 +1394,50 @@
 #endif
 };
 
-static struct adp5520_leds_platfrom_data adp5520_leds_data = {
+static struct adp5520_leds_platform_data adp5520_leds_data = {
 	.num_leds = ARRAY_SIZE(adp5520_leds),
 	.leds = adp5520_leds,
-	.fade_in = FADE_T_600ms,
-	.fade_out = FADE_T_600ms,
-	.led_on_time = LED_ONT_600ms,
+	.fade_in = ADP5520_FADE_T_600ms,
+	.fade_out = ADP5520_FADE_T_600ms,
+	.led_on_time = ADP5520_LED_ONT_600ms,
 };
 
 	/*
 	 *  ADP5520 GPIO Data
 	 */
 
-static struct adp5520_gpio_platfrom_data adp5520_gpio_data = {
+static struct adp5520_gpio_platform_data adp5520_gpio_data = {
 	.gpio_start = 50,
-	.gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
-	.gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
+	.gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
+	.gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
 };
 
 	/*
 	 *  ADP5520 Keypad Data
 	 */
 
-#include <linux/input.h>
 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
-	[KEY(0, 0)]	= KEY_GRAVE,
-	[KEY(0, 1)]	= KEY_1,
-	[KEY(0, 2)]	= KEY_2,
-	[KEY(0, 3)]	= KEY_3,
-	[KEY(1, 0)]	= KEY_4,
-	[KEY(1, 1)]	= KEY_5,
-	[KEY(1, 2)]	= KEY_6,
-	[KEY(1, 3)]	= KEY_7,
-	[KEY(2, 0)]	= KEY_8,
-	[KEY(2, 1)]	= KEY_9,
-	[KEY(2, 2)]	= KEY_0,
-	[KEY(2, 3)]	= KEY_MINUS,
-	[KEY(3, 0)]	= KEY_EQUAL,
-	[KEY(3, 1)]	= KEY_BACKSLASH,
-	[KEY(3, 2)]	= KEY_BACKSPACE,
-	[KEY(3, 3)]	= KEY_ENTER,
+	[ADP5520_KEY(0, 0)]	= KEY_GRAVE,
+	[ADP5520_KEY(0, 1)]	= KEY_1,
+	[ADP5520_KEY(0, 2)]	= KEY_2,
+	[ADP5520_KEY(0, 3)]	= KEY_3,
+	[ADP5520_KEY(1, 0)]	= KEY_4,
+	[ADP5520_KEY(1, 1)]	= KEY_5,
+	[ADP5520_KEY(1, 2)]	= KEY_6,
+	[ADP5520_KEY(1, 3)]	= KEY_7,
+	[ADP5520_KEY(2, 0)]	= KEY_8,
+	[ADP5520_KEY(2, 1)]	= KEY_9,
+	[ADP5520_KEY(2, 2)]	= KEY_0,
+	[ADP5520_KEY(2, 3)]	= KEY_MINUS,
+	[ADP5520_KEY(3, 0)]	= KEY_EQUAL,
+	[ADP5520_KEY(3, 1)]	= KEY_BACKSLASH,
+	[ADP5520_KEY(3, 2)]	= KEY_BACKSPACE,
+	[ADP5520_KEY(3, 3)]	= KEY_ENTER,
 };
 
-static struct adp5520_keys_platfrom_data adp5520_keys_data = {
-	.rows_en_mask	= ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0,
-	.cols_en_mask	= COL_C3 | COL_C2 | COL_C1 | COL_C0,
+static struct adp5520_keys_platform_data adp5520_keys_data = {
+	.rows_en_mask	= ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
+	.cols_en_mask	= ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
 	.keymap		= adp5520_keymap,
 	.keymapsize	= ARRAY_SIZE(adp5520_keymap),
 	.repeat		= 0,
@@ -1366,50 +1447,81 @@
 	 *  ADP5520/5501 Multifuction Device Init Data
 	 */
 
-static struct adp5520_subdev_info adp5520_subdevs[] = {
-	{
-		.name = "adp5520-backlight",
-		.id = ID_ADP5520,
-		.platform_data = &adp5520_backlight_data,
-	},
-	{
-		.name = "adp5520-led",
-		.id = ID_ADP5520,
-		.platform_data = &adp5520_leds_data,
-	},
-	{
-		.name = "adp5520-gpio",
-		.id = ID_ADP5520,
-		.platform_data = &adp5520_gpio_data,
-	},
-	{
-		.name = "adp5520-keys",
-		.id = ID_ADP5520,
-		.platform_data = &adp5520_keys_data,
-	},
-};
-
 static struct adp5520_platform_data adp5520_pdev_data = {
-	.num_subdevs = ARRAY_SIZE(adp5520_subdevs),
-	.subdevs = adp5520_subdevs,
+	.backlight = &adp5520_backlight_data,
+	.leds = &adp5520_leds_data,
+	.gpio = &adp5520_gpio_data,
+	.keys = &adp5520_keys_data,
 };
 
 #endif
 
 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
 #include <linux/i2c/adp5588.h>
-static struct adp5588_gpio_platfrom_data adp5588_gpio_data = {
+static struct adp5588_gpio_platform_data adp5588_gpio_data = {
 	.gpio_start = 50,
 	.pullup_dis_mask = 0,
 };
 #endif
 
+#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
+#include <linux/i2c/adp8870.h>
+static struct led_info adp8870_leds[] = {
+	{
+		.name = "adp8870-led7",
+		.default_trigger = "none",
+		.flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms,
+	},
+};
+
+
+static struct adp8870_backlight_platform_data adp8870_pdata = {
+	.bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 |
+			 ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6,	/* 1 = Backlight 0 = Individual LED */
+	.pwm_assign = 0,				/* 1 = Enables PWM mode */
+
+	.bl_fade_in = ADP8870_FADE_T_1200ms,		/* Backlight Fade-In Timer */
+	.bl_fade_out = ADP8870_FADE_T_1200ms,		/* Backlight Fade-Out Timer */
+	.bl_fade_law = ADP8870_FADE_LAW_CUBIC1,		/* fade-on/fade-off transfer characteristic */
+
+	.en_ambl_sens = 1,				/* 1 = enable ambient light sensor */
+	.abml_filt = ADP8870_BL_AMBL_FILT_320ms,	/* Light sensor filter time */
+
+	.l1_daylight_max = ADP8870_BL_CUR_mA(20),	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l1_daylight_dim = ADP8870_BL_CUR_mA(0),	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l2_bright_max = ADP8870_BL_CUR_mA(14),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l2_bright_dim = ADP8870_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l3_office_max = ADP8870_BL_CUR_mA(6),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l3_office_dim = ADP8870_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l4_indoor_max = ADP8870_BL_CUR_mA(3),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l4_indor_dim = ADP8870_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l5_dark_max = ADP8870_BL_CUR_mA(2),		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+	.l5_dark_dim = ADP8870_BL_CUR_mA(0),		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+	.l2_trip = ADP8870_L2_COMP_CURR_uA(710),	/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	.l2_hyst = ADP8870_L2_COMP_CURR_uA(73),		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+	.l3_trip = ADP8870_L3_COMP_CURR_uA(389),	/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+	.l3_hyst = ADP8870_L3_COMP_CURR_uA(54),		/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+	.l4_trip = ADP8870_L4_COMP_CURR_uA(167),	/* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+	.l4_hyst = ADP8870_L4_COMP_CURR_uA(16),		/* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+	.l5_trip = ADP8870_L5_COMP_CURR_uA(43),		/* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+	.l5_hyst = ADP8870_L5_COMP_CURR_uA(11),		/* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+	.leds = adp8870_leds,
+	.num_leds = ARRAY_SIZE(adp8870_leds),
+	.led_fade_law = ADP8870_FADE_LAW_SQUARE,	/* fade-on/fade-off transfer characteristic */
+	.led_fade_in = ADP8870_FADE_T_600ms,
+	.led_fade_out = ADP8870_FADE_T_600ms,
+	.led_on_time = ADP8870_LED_ONT_200ms,
+};
+#endif
+
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_INPUT_EVAL_AD7142EB)
+#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
 	{
 		I2C_BOARD_INFO("ad7142_captouch", 0x2C),
 		.irq = IRQ_PG5,
-		.platform_data = (void *)&ad7142_platfrom_data,
+		.platform_data = (void *)&ad7142_i2c_platform_data,
 	},
 #endif
 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
@@ -1462,6 +1574,32 @@
 		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 	},
 #endif
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+	{
+		I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2C),
+	},
+#endif
+#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
+	{
+		I2C_BOARD_INFO("adp8870", 0x2B),
+		.platform_data = (void *)&adp8870_pdata,
+	},
+#endif
+#if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
+	{
+		I2C_BOARD_INFO("adau1371", 0x1A),
+	},
+#endif
+#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
+	{
+		I2C_BOARD_INFO("adau1761", 0x38),
+	},
+#endif
+#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
+	{
+		I2C_BOARD_INFO("ad5258", 0x18),
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -1602,8 +1740,8 @@
 	&dm9000_device,
 #endif
 
-#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
-	&ax88180_device,
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+	&bfin_can_device,
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
diff --git a/arch/blackfin/mach-bf537/include/mach/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h
index 17fab44..8b291418 100644
--- a/arch/blackfin/mach-bf537/include/mach/bf537.h
+++ b/arch/blackfin/mach-bf537/include/mach/bf537.h
@@ -9,16 +9,6 @@
 #ifndef __MACH_BF537_H__
 #define __MACH_BF537_H__
 
-/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */
-
-#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE)	/* SPI_STAT */
-#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF)	/* SPORTx_STAT */
-#define PPI_ERR_MASK (0xFFFF & ~FLD)	/* PPI_STATUS */
-#define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE)	/* EMAC_SYSTAT */
-#define UART_ERR_MASK_STAT1 (0x4)	/* UARTx_IIR */
-#define UART_ERR_MASK_STAT0 (0x2)	/* UARTx_IIR */
-#define CAN_ERR_MASK  (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF)	/* CAN_GIF */
-
 #define OFFSET_(x) ((x) & 0x0000FFFF)
 
 /*some misc defines*/
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index eab006d..a12d4b6 100644
--- a/arch/blackfin/mach-bf537/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -40,10 +40,4 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* PLL_DIV Masks													*/
-#define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
-#define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
-#define CCLK_DIV4 CSEL_DIV4	/*          CCLK = VCO / 4                                  */
-#define CCLK_DIV8 CSEL_DIV8	/*          CCLK = VCO / 8                                  */
-
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index a6d20ca5..066d5c2 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -958,67 +958,6 @@
 **				modifier UNLESS the lower order bits are saved and ORed back in when
 **				the macro is used.
 *************************************************************************************/
-/*
-** ********************* PLL AND RESET MASKS ****************************************/
-/* PLL_CTL Masks																	*/
-#define DF				0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2                                     */
-#define PLL_OFF			0x0002	/* PLL Not Powered                                                                      */
-#define STOPCK			0x0008	/* Core Clock Off                                                                       */
-#define PDWN			0x0020	/* Enter Deep Sleep Mode                                                        */
-#define	IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches                        */
-#define	OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals                       */
-#define BYPASS			0x0100	/* Bypass the PLL                                                                       */
-#define	MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors                       */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits)			*/
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL         */
-
-/* PLL_DIV Masks														*/
-#define SSEL			0x000F	/* System Select                                                */
-#define	CSEL			0x0030	/* Core Select                                                  */
-#define CSEL_DIV1		0x0000	/*              CCLK = VCO / 1                                  */
-#define CSEL_DIV2		0x0010	/*              CCLK = VCO / 2                                  */
-#define	CSEL_DIV4		0x0020	/*              CCLK = VCO / 4                                  */
-#define	CSEL_DIV8		0x0030	/*              CCLK = VCO / 8                                  */
-/* PLL_DIV Macros														*/
-#define SET_SSEL(x)		((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL  */
-
-/* VR_CTL Masks																	*/
-#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator */
-#define	HIBERNATE		0x0000	/*              Powerdown/Bypass On-Board Regulation    */
-#define	FREQ_333		0x0001	/*              Switching Frequency Is 333 kHz                  */
-#define	FREQ_667		0x0002	/*              Switching Frequency Is 667 kHz                  */
-#define	FREQ_1000		0x0003	/*              Switching Frequency Is 1 MHz                    */
-
-#define GAIN			0x000C	/* Voltage Level Gain   */
-#define	GAIN_5			0x0000	/*              GAIN = 5                */
-#define	GAIN_10			0x0004	/*              GAIN = 10               */
-#define	GAIN_20			0x0008	/*              GAIN = 20               */
-#define	GAIN_50			0x000C	/*              GAIN = 50               */
-
-#define	VLEV			0x00F0	/* Internal Voltage Level                                       */
-#define	VLEV_085 		0x0060	/*              VLEV = 0.85 V (-5% - +10% Accuracy)     */
-#define	VLEV_090		0x0070	/*              VLEV = 0.90 V (-5% - +10% Accuracy)     */
-#define	VLEV_095		0x0080	/*              VLEV = 0.95 V (-5% - +10% Accuracy)     */
-#define	VLEV_100		0x0090	/*              VLEV = 1.00 V (-5% - +10% Accuracy)     */
-#define	VLEV_105		0x00A0	/*              VLEV = 1.05 V (-5% - +10% Accuracy)     */
-#define	VLEV_110		0x00B0	/*              VLEV = 1.10 V (-5% - +10% Accuracy)     */
-#define	VLEV_115		0x00C0	/*              VLEV = 1.15 V (-5% - +10% Accuracy)     */
-#define	VLEV_120		0x00D0	/*              VLEV = 1.20 V (-5% - +10% Accuracy)     */
-#define	VLEV_125		0x00E0	/*              VLEV = 1.25 V (-5% - +10% Accuracy)     */
-#define	VLEV_130		0x00F0	/*              VLEV = 1.30 V (-5% - +10% Accuracy)     */
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate       */
-#define	CANWE			0x0200	/* Enable CAN Wakeup From Hibernate			*/
-#define	PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate			*/
-#define	CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
-#define	PHYCLKOE		CLKBUFOE	/* Alternative legacy name for the above */
-#define	SCKELOW		0x8000	/* Enable Drive CKE Low During Reset		*/
-
-/* PLL_STAT Masks																	*/
-#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled    */
-#define	FULL_ON				0x0002	/* Processor In Full On Mode                                    */
-#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled   */
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached                                 */
 
 /* CHIPID Masks */
 #define CHIPID_VERSION         0xF0000000
@@ -1645,34 +1584,6 @@
 #define BGSTAT			0x0020	/* Bus Grant Status                                             */
 
 /* **************************  DMA CONTROLLER MASKS  ********************************/
-/* DMAx_CONFIG, MDMA_yy_CONFIG Masks												*/
-#define DMAEN			0x0001	/* DMA Channel Enable                                                   */
-#define WNR				0x0002	/* Channel Direction (W/R*)                                             */
-#define WDSIZE_8		0x0000	/* Transfer Word Size = 8                                               */
-#define WDSIZE_16		0x0004	/* Transfer Word Size = 16                                              */
-#define WDSIZE_32		0x0008	/* Transfer Word Size = 32                                              */
-#define DMA2D			0x0010	/* DMA Mode (2D/1D*)                                                    */
-#define RESTART			0x0020	/* DMA Buffer Clear                                                             */
-#define DI_SEL			0x0040	/* Data Interrupt Timing Select                                 */
-#define DI_EN			0x0080	/* Data Interrupt Enable                                                */
-#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer)   */
-#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1                                             */
-#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2                                             */
-#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3                                             */
-#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4                                             */
-#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5                                             */
-#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6                                             */
-#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7                                             */
-#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8                                             */
-#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9                                             */
-#define NDSIZE	        	0x0900	/* Next Descriptor Size */
-
-#define DMAFLOW	        	0x7000	/* Flow Control */
-#define DMAFLOW_STOP		0x0000	/* Stop Mode */
-#define DMAFLOW_AUTO		0x1000	/* Autobuffer Mode */
-#define DMAFLOW_ARRAY		0x4000	/* Descriptor Array Mode */
-#define DMAFLOW_SMALL		0x6000	/* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE		0x7000	/* Large Model Descriptor List Mode */
 
 /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks								*/
 #define CTYPE			0x0040	/* DMA Channel Type Indicator (Memory/Peripheral*)      */
@@ -1690,12 +1601,6 @@
 #define	PMAP_UART1RX	0xA000	/*              UART1 Port Receive DMA                                          */
 #define	PMAP_UART1TX	0xB000	/*              UART1 Port Transmit DMA                                         */
 
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks						*/
-#define DMA_DONE		0x0001	/* DMA Completion Interrupt Status      */
-#define DMA_ERR			0x0002	/* DMA Error Interrupt Status           */
-#define DFETCH			0x0004	/* DMA Descriptor Fetch Indicator       */
-#define DMA_RUN			0x0008	/* DMA Channel Running Indicator        */
-
 /*  ************  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
 /*  PPI_CONTROL Masks													*/
 #define PORT_EN			0x0001	/* PPI Port Enable                                      */
diff --git a/arch/blackfin/mach-bf538/Makefile b/arch/blackfin/mach-bf538/Makefile
index 8cd2719..c0be54f 100644
--- a/arch/blackfin/mach-bf538/Makefile
+++ b/arch/blackfin/mach-bf538/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-y := ints-priority.o dma.o
+obj-$(CONFIG_GPIOLIB)	+= ext-gpio.o
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 14af5c2..c296bb1 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -151,6 +151,44 @@
 #endif
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+unsigned short bfin_can_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+	{
+		.start = 0xFFC02A00,
+		.end = 0xFFC02FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN_RX,
+		.end = IRQ_CAN_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_TX,
+		.end = IRQ_CAN_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_ERROR,
+		.end = IRQ_CAN_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can_device = {
+	.name = "bfin_can",
+	.num_resources = ARRAY_SIZE(bfin_can_resources),
+	.resource = bfin_can_resources,
+	.dev = {
+		.platform_data = &bfin_can_peripherals, /* Passed to driver */
+	},
+};
+#endif
+
 /*
  *  USB-LAN EzExtender board
  *  Driver needs to know address, irq and flag pin.
@@ -610,6 +648,10 @@
 #endif
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+	&bfin_can_device,
+#endif
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	&smc91x_device,
 #endif
diff --git a/arch/blackfin/mach-bf538/ext-gpio.c b/arch/blackfin/mach-bf538/ext-gpio.c
new file mode 100644
index 0000000..180b125
--- /dev/null
+++ b/arch/blackfin/mach-bf538/ext-gpio.c
@@ -0,0 +1,123 @@
+/*
+ * GPIOLIB interface for BF538/9 PORT C, D, and E GPIOs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
+
+#define DEFINE_REG(reg, off) \
+static inline u16 read_##reg(void __iomem *port) \
+	{ return bfin_read16(port + off); } \
+static inline void write_##reg(void __iomem *port, u16 v) \
+	{ bfin_write16(port + off, v); }
+
+DEFINE_REG(PORTIO, 0x00)
+DEFINE_REG(PORTIO_CLEAR, 0x10)
+DEFINE_REG(PORTIO_SET, 0x20)
+DEFINE_REG(PORTIO_DIR, 0x40)
+DEFINE_REG(PORTIO_INEN, 0x50)
+
+static void __iomem *gpio_chip_to_mmr(struct gpio_chip *chip)
+{
+	switch (chip->base) {
+	default: /* not really needed, but keeps gcc happy */
+	case GPIO_PC0: return (void __iomem *)PORTCIO;
+	case GPIO_PD0: return (void __iomem *)PORTDIO;
+	case GPIO_PE0: return (void __iomem *)PORTEIO;
+	}
+}
+
+static int bf538_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	void __iomem *port = gpio_chip_to_mmr(chip);
+	return !!(read_PORTIO(port) & (1u << gpio));
+}
+
+static void bf538_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	void __iomem *port = gpio_chip_to_mmr(chip);
+	if (value)
+		write_PORTIO_SET(port, (1u << gpio));
+	else
+		write_PORTIO_CLEAR(port, (1u << gpio));
+}
+
+static int bf538_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	void __iomem *port = gpio_chip_to_mmr(chip);
+	write_PORTIO_DIR(port, read_PORTIO_DIR(port) & ~(1u << gpio));
+	write_PORTIO_INEN(port, read_PORTIO_INEN(port) | (1u << gpio));
+	return 0;
+}
+
+static int bf538_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	void __iomem *port = gpio_chip_to_mmr(chip);
+	write_PORTIO_INEN(port, read_PORTIO_INEN(port) & ~(1u << gpio));
+	bf538_gpio_set_value(port, gpio, value);
+	write_PORTIO_DIR(port, read_PORTIO_DIR(port) | (1u << gpio));
+	return 0;
+}
+
+static int bf538_gpio_request(struct gpio_chip *chip, unsigned gpio)
+{
+	return bfin_special_gpio_request(chip->base + gpio, chip->label);
+}
+
+static void bf538_gpio_free(struct gpio_chip *chip, unsigned gpio)
+{
+	return bfin_special_gpio_free(chip->base + gpio);
+}
+
+/* We don't set the irq fields as these banks cannot generate interrupts */
+
+static struct gpio_chip bf538_portc_chip = {
+	.label = "GPIO-PC",
+	.direction_input = bf538_gpio_direction_input,
+	.get = bf538_gpio_get_value,
+	.direction_output = bf538_gpio_direction_output,
+	.set = bf538_gpio_set_value,
+	.request = bf538_gpio_request,
+	.free = bf538_gpio_free,
+	.base = GPIO_PC0,
+	.ngpio = GPIO_PC9 - GPIO_PC0 + 1,
+};
+
+static struct gpio_chip bf538_portd_chip = {
+	.label = "GPIO-PD",
+	.direction_input = bf538_gpio_direction_input,
+	.get = bf538_gpio_get_value,
+	.direction_output = bf538_gpio_direction_output,
+	.set = bf538_gpio_set_value,
+	.request = bf538_gpio_request,
+	.free = bf538_gpio_free,
+	.base = GPIO_PD0,
+	.ngpio = GPIO_PD13 - GPIO_PD0 + 1,
+};
+
+static struct gpio_chip bf538_porte_chip = {
+	.label = "GPIO-PE",
+	.direction_input = bf538_gpio_direction_input,
+	.get = bf538_gpio_get_value,
+	.direction_output = bf538_gpio_direction_output,
+	.set = bf538_gpio_set_value,
+	.request = bf538_gpio_request,
+	.free = bf538_gpio_free,
+	.base = GPIO_PE0,
+	.ngpio = GPIO_PE15 - GPIO_PE0 + 1,
+};
+
+static int __init bf538_extgpio_setup(void)
+{
+	return gpiochip_add(&bf538_portc_chip) |
+		gpiochip_add(&bf538_portd_chip) |
+		gpiochip_add(&bf538_porte_chip);
+}
+arch_initcall(bf538_extgpio_setup);
diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index 278e894..08b5eab 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -37,10 +37,4 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* PLL_DIV Masks													*/
-#define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
-#define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
-#define CCLK_DIV4 CSEL_DIV4	/*          CCLK = VCO / 4                                  */
-#define CCLK_DIV8 CSEL_DIV8	/*          CCLK = VCO / 8                                  */
-
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index 5f6c34d..fac563e 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -468,31 +468,31 @@
 /* General-Purpose Ports  (0xFFC01500 -	0xFFC015FF)	 */
 
 /* GPIO	Port C Register	Names */
-#define	GPIO_C_CNFG			0xFFC01500	/* GPIO	Pin Port C Configuration Register */
-#define	GPIO_C_D			0xFFC01510	/* GPIO	Pin Port C Data	Register */
-#define	GPIO_C_C			0xFFC01520	/* Clear GPIO Pin Port C Register */
-#define	GPIO_C_S			0xFFC01530	/* Set GPIO Pin	Port C Register */
-#define	GPIO_C_T			0xFFC01540	/* Toggle GPIO Pin Port	C Register */
-#define	GPIO_C_DIR			0xFFC01550	/* GPIO	Pin Port C Direction Register */
-#define	GPIO_C_INEN			0xFFC01560	/* GPIO	Pin Port C Input Enable	Register */
+#define PORTCIO_FER			0xFFC01500	/* GPIO	Pin Port C Configuration Register */
+#define PORTCIO				0xFFC01510	/* GPIO	Pin Port C Data	Register */
+#define PORTCIO_CLEAR			0xFFC01520	/* Clear GPIO Pin Port C Register */
+#define PORTCIO_SET			0xFFC01530	/* Set GPIO Pin	Port C Register */
+#define PORTCIO_TOGGLE			0xFFC01540	/* Toggle GPIO Pin Port	C Register */
+#define PORTCIO_DIR			0xFFC01550	/* GPIO	Pin Port C Direction Register */
+#define PORTCIO_INEN			0xFFC01560	/* GPIO	Pin Port C Input Enable	Register */
 
 /* GPIO	Port D Register	Names */
-#define	GPIO_D_CNFG			0xFFC01504	/* GPIO	Pin Port D Configuration Register */
-#define	GPIO_D_D			0xFFC01514	/* GPIO	Pin Port D Data	Register */
-#define	GPIO_D_C			0xFFC01524	/* Clear GPIO Pin Port D Register */
-#define	GPIO_D_S			0xFFC01534	/* Set GPIO Pin	Port D Register */
-#define	GPIO_D_T			0xFFC01544	/* Toggle GPIO Pin Port	D Register */
-#define	GPIO_D_DIR			0xFFC01554	/* GPIO	Pin Port D Direction Register */
-#define	GPIO_D_INEN			0xFFC01564	/* GPIO	Pin Port D Input Enable	Register */
+#define PORTDIO_FER			0xFFC01504	/* GPIO	Pin Port D Configuration Register */
+#define PORTDIO				0xFFC01514	/* GPIO	Pin Port D Data	Register */
+#define PORTDIO_CLEAR			0xFFC01524	/* Clear GPIO Pin Port D Register */
+#define PORTDIO_SET			0xFFC01534	/* Set GPIO Pin	Port D Register */
+#define PORTDIO_TOGGLE			0xFFC01544	/* Toggle GPIO Pin Port	D Register */
+#define PORTDIO_DIR			0xFFC01554	/* GPIO	Pin Port D Direction Register */
+#define PORTDIO_INEN			0xFFC01564	/* GPIO	Pin Port D Input Enable	Register */
 
 /* GPIO	Port E Register	Names */
-#define	GPIO_E_CNFG			0xFFC01508	/* GPIO	Pin Port E Configuration Register */
-#define	GPIO_E_D			0xFFC01518	/* GPIO	Pin Port E Data	Register */
-#define	GPIO_E_C			0xFFC01528	/* Clear GPIO Pin Port E Register */
-#define	GPIO_E_S			0xFFC01538	/* Set GPIO Pin	Port E Register */
-#define	GPIO_E_T			0xFFC01548	/* Toggle GPIO Pin Port	E Register */
-#define	GPIO_E_DIR			0xFFC01558	/* GPIO	Pin Port E Direction Register */
-#define	GPIO_E_INEN			0xFFC01568	/* GPIO	Pin Port E Input Enable	Register */
+#define PORTEIO_FER			0xFFC01508	/* GPIO	Pin Port E Configuration Register */
+#define PORTEIO				0xFFC01518	/* GPIO	Pin Port E Data	Register */
+#define PORTEIO_CLEAR			0xFFC01528	/* Clear GPIO Pin Port E Register */
+#define PORTEIO_SET			0xFFC01538	/* Set GPIO Pin	Port E Register */
+#define PORTEIO_TOGGLE			0xFFC01548	/* Toggle GPIO Pin Port	E Register */
+#define PORTEIO_DIR			0xFFC01558	/* GPIO	Pin Port E Direction Register */
+#define PORTEIO_INEN			0xFFC01568	/* GPIO	Pin Port E Input Enable	Register */
 
 /* DMA Controller 1 Traffic Control Registers (0xFFC01B00 - 0xFFC01BFF) */
 
@@ -1422,81 +1422,6 @@
 /* System MMR Register Bits and	Macros */
 /******************************************************************************* */
 
-/* ********************* PLL AND RESET MASKS ************************ */
-/* PLL_CTL Masks */
-#define	PLL_CLKIN			0x0000	/* Pass	CLKIN to PLL */
-#define	PLL_CLKIN_DIV2		0x0001	/* Pass	CLKIN/2	to PLL */
-#define	DF					0x0001	 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
-#define	PLL_OFF				0x0002	/* Shut	off PLL	clocks */
-
-#define	STOPCK				0x0008	/* Core	Clock Off		 */
-#define	PDWN				0x0020	/* Put the PLL in a Deep Sleep state */
-#define	IN_DELAY			0x0014	/* EBIU	Input Delay Select */
-#define	OUT_DELAY			0x00C0	/* EBIU	Output Delay Select */
-#define	BYPASS				0x0100	/* Bypass the PLL */
-#define	MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors */
-
-/* PLL_CTL Macros				 */
-#ifdef _MISRA_RULES
-#define	SET_MSEL(x)		(((x)&0x3Fu) <<	0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-#define	SET_OUT_DELAY(x)	(((x)&0x03u) <<	0x6)
-#define	SET_IN_DELAY(x)		((((x)&0x02u) << 0x3) |	(((x)&0x01u) <<	0x2))
-#else
-#define	SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-#define	SET_OUT_DELAY(x)	(((x)&0x03) << 0x6)
-#define	SET_IN_DELAY(x)		((((x)&0x02) <<	0x3) | (((x)&0x01) << 0x2))
-#endif /* _MISRA_RULES */
-
-/* PLL_DIV Masks */
-#define	SSEL				0x000F	/* System Select */
-#define	CSEL				0x0030	/* Core	Select */
-#define	CSEL_DIV1		0x0000	/*		CCLK = VCO / 1 */
-#define	CSEL_DIV2		0x0010	/*		CCLK = VCO / 2 */
-#define	CSEL_DIV4		0x0020	/*		CCLK = VCO / 4 */
-#define	CSEL_DIV8		0x0030	/*		CCLK = VCO / 8 */
-
-#define	SCLK_DIV(x)			(x)		/* SCLK	= VCO /	x */
-
-/* PLL_DIV Macros							 */
-#ifdef _MISRA_RULES
-#define	SET_SSEL(x)			((x)&0xFu)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-#else
-#define	SET_SSEL(x)			((x)&0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-#endif /* _MISRA_RULES */
-
-/* PLL_STAT Masks										 */
-#define	ACTIVE_PLLENABLED	0x0001	/* Processor In	Active Mode With PLL Enabled */
-#define	FULL_ON				0x0002	/* Processor In	Full On	Mode */
-#define	ACTIVE_PLLDISABLED	0x0004	/* Processor In	Active Mode With PLL Disabled */
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been	Reached */
-
-/* VR_CTL Masks										 */
-#define	FREQ			0x0003	/* Switching Oscillator	Frequency For Regulator */
-#define	HIBERNATE		0x0000	/*		Powerdown/Bypass On-Board Regulation */
-#define	FREQ_333		0x0001	/*		Switching Frequency Is 333 kHz */
-#define	FREQ_667		0x0002	/*		Switching Frequency Is 667 kHz */
-#define	FREQ_1000		0x0003	/*		Switching Frequency Is 1 MHz */
-
-#define	GAIN			0x000C	/* Voltage Level Gain */
-#define	GAIN_5			0x0000	/*		GAIN = 5 */
-#define	GAIN_10			0x0004	/*		GAIN = 10 */
-#define	GAIN_20			0x0008	/*		GAIN = 20 */
-#define	GAIN_50			0x000C	/*		GAIN = 50 */
-
-#define	VLEV			0x00F0	/* Internal Voltage Level - Only Program Values	Within Specifications */
-#define	VLEV_100		0x0090	/*	VLEV = 1.00 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_105		0x00A0	/*	VLEV = 1.05 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_110		0x00B0	/*	VLEV = 1.10 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_115		0x00C0	/*	VLEV = 1.15 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_120		0x00D0	/*	VLEV = 1.20 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_125		0x00E0	/*	VLEV = 1.25 V (See Datasheet for Regulator Tolerance) */
-#define	VLEV_130		0x00F0	/*	VLEV = 1.30 V (See Datasheet for Regulator Tolerance) */
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From	Hibernate */
-#define	CANWE			0x0200	/* Enable CAN Wakeup From Hibernate */
-#define	MXVRWE			0x0400	/* Enable MXVR Wakeup From Hibernate */
-#define	SCKELOW			0x8000	/* Do Not Drive	SCKE High During Reset After Hibernate */
-
 /* SWRST Mask */
 #define	SYSTEM_RESET	0x0007	/* Initiates A System Software Reset */
 #define	DOUBLE_FAULT	0x0008	/* Core	Double Fault Causes Reset */
@@ -1609,91 +1534,6 @@
 #endif /* _MISRA_RULES */
 
 
-/* ********* WATCHDOG TIMER MASKS ******************** */
-/* Watchdog Timer WDOG_CTL Register Masks */
-#ifdef _MISRA_RULES
-#define	WDEV(x)			(((x)<<1) & 0x0006u)	/* event generated on roll over */
-#else
-#define	WDEV(x)			(((x)<<1) & 0x0006)	/* event generated on roll over */
-#endif /* _MISRA_RULES */
-#define	WDEV_RESET		0x0000				/* generate reset event	on roll	over */
-#define	WDEV_NMI		0x0002				/* generate NMI	event on roll over */
-#define	WDEV_GPI		0x0004				/* generate GP IRQ on roll over */
-#define	WDEV_NONE		0x0006				/* no event on roll over */
-#define	WDEN			0x0FF0				/* enable watchdog */
-#define	WDDIS			0x0AD0				/* disable watchdog */
-#define	WDRO			0x8000				/* watchdog rolled over	latch */
-
-/* deprecated WDOG_CTL Register	Masks for legacy code */
-#define	ICTL WDEV
-#define	ENABLE_RESET	WDEV_RESET
-#define	WDOG_RESET		WDEV_RESET
-#define	ENABLE_NMI		WDEV_NMI
-#define	WDOG_NMI		WDEV_NMI
-#define	ENABLE_GPI		WDEV_GPI
-#define	WDOG_GPI		WDEV_GPI
-#define	DISABLE_EVT	WDEV_NONE
-#define	WDOG_NONE		WDEV_NONE
-
-#define	TMR_EN			WDEN
-#define	WDOG_DISABLE		WDDIS
-#define	TRO			WDRO
-
-#define	ICTL_P0			0x01
-#define	ICTL_P1			0x02
-#define	TRO_P			0x0F
-
-
-/* ***************  REAL TIME CLOCK MASKS  **************************/
-/* RTC_STAT and	RTC_ALARM register */
-#define	RTSEC		0x0000003F	/* Real-Time Clock Seconds */
-#define	RTMIN		0x00000FC0	/* Real-Time Clock Minutes */
-#define	RTHR		0x0001F000	/* Real-Time Clock Hours */
-#define	RTDAY		0xFFFE0000	/* Real-Time Clock Days */
-
-/* RTC_ICTL register */
-#define	SWIE		0x0001		/* Stopwatch Interrupt Enable */
-#define	AIE			0x0002		/* Alarm Interrupt Enable */
-#define	SIE			0x0004		/* Seconds (1 Hz) Interrupt Enable */
-#define	MIE			0x0008		/* Minutes Interrupt Enable */
-#define	HIE			0x0010		/* Hours Interrupt Enable */
-#define	DIE			0x0020		/* 24 Hours (Days) Interrupt Enable */
-#define	DAIE		0x0040		/* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
-#define	WCIE		0x8000		/* Write Complete Interrupt Enable */
-
-/* RTC_ISTAT register */
-#define	SWEF		0x0001		/* Stopwatch Event Flag */
-#define	AEF			0x0002		/* Alarm Event Flag */
-#define	SEF			0x0004		/* Seconds (1 Hz) Event	Flag */
-#define	MEF			0x0008		/* Minutes Event Flag */
-#define	HEF			0x0010		/* Hours Event Flag */
-#define	DEF			0x0020		/* 24 Hours (Days) Event Flag */
-#define	DAEF		0x0040		/* Day Alarm (Day, Hour, Minute, Second) Event Flag */
-#define	WPS			0x4000		/* Write Pending Status	(RO) */
-#define	WCOM		0x8000		/* Write Complete */
-
-/* RTC_FAST Mask (RTC_PREN Mask) */
-#define	ENABLE_PRESCALE	     0x00000001	 /* Enable prescaler so	RTC runs at 1 Hz */
-#define	PREN		     0x00000001
-		/* ** Must be set after	power-up for proper operation of RTC */
-
-/* Deprecated RTC_STAT and RTC_ALARM Masks			 */
-#define	RTC_SEC			RTSEC	/* Real-Time Clock Seconds */
-#define	RTC_MIN			RTMIN	/* Real-Time Clock Minutes */
-#define	RTC_HR			RTHR	/* Real-Time Clock Hours */
-#define	RTC_DAY			RTDAY	/* Real-Time Clock Days */
-
-/* Deprecated RTC_ICTL/RTC_ISTAT Masks											 */
-#define	STOPWATCH		SWIE		/* Stopwatch Interrupt Enable	 */
-#define	ALARM			AIE		/* Alarm Interrupt Enable		 */
-#define	SECOND			SIE		/* Seconds (1 Hz) Interrupt Enable */
-#define	MINUTE			MIE		/* Minutes Interrupt Enable		 */
-#define	HOUR			HIE		/* Hours Interrupt Enable		 */
-#define	DAY				DIE		/* 24 Hours (Days) Interrupt Enable */
-#define	DAY_ALARM		DAIE		/* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
-#define	WRITE_COMPLETE	WCIE		/* Write Complete Interrupt Enable */
-
-
 /* ***************************** UART CONTROLLER MASKS ********************** */
 /* UARTx_LCR Register */
 #ifdef _MISRA_RULES
@@ -1917,52 +1757,6 @@
 
 
 /* **********  DMA CONTROLLER MASKS  ***********************/
-/* DMAx_CONFIG,	MDMA_yy_CONFIG Masks */
-#define	DMAEN		0x0001	/* Channel Enable */
-#define	WNR			0x0002	/* Channel Direction (W/R*) */
-#define	WDSIZE_8	0x0000	/* Word	Size 8 bits */
-#define	WDSIZE_16	0x0004	/* Word	Size 16	bits */
-#define	WDSIZE_32	0x0008	/* Word	Size 32	bits */
-#define	DMA2D		0x0010	/* 2D/1D* Mode */
-#define	RESTART		0x0020	/* Restart */
-#define	DI_SEL		0x0040	/* Data	Interrupt Select */
-#define	DI_EN		0x0080	/* Data	Interrupt Enable */
-#define	NDSIZE		0x0900	/* Next	Descriptor Size */
-#define	NDSIZE_0	0x0000	/* Next	Descriptor Size	= 0 (Stop/Autobuffer) */
-#define	NDSIZE_1	0x0100	/* Next	Descriptor Size	= 1 */
-#define	NDSIZE_2	0x0200	/* Next	Descriptor Size	= 2 */
-#define	NDSIZE_3	0x0300	/* Next	Descriptor Size	= 3 */
-#define	NDSIZE_4	0x0400	/* Next	Descriptor Size	= 4 */
-#define	NDSIZE_5	0x0500	/* Next	Descriptor Size	= 5 */
-#define	NDSIZE_6	0x0600	/* Next	Descriptor Size	= 6 */
-#define	NDSIZE_7	0x0700	/* Next	Descriptor Size	= 7 */
-#define	NDSIZE_8	0x0800	/* Next	Descriptor Size	= 8 */
-#define	NDSIZE_9	0x0900	/* Next	Descriptor Size	= 9 */
-
-#define DMAFLOW			0x7000	/* Flow Control */
-#define DMAFLOW_STOP		0x0000	/* Stop Mode */
-#define DMAFLOW_AUTO		0x1000	/* Autobuffer Mode */
-#define DMAFLOW_ARRAY		0x4000	/* Descriptor Array Mode */
-#define DMAFLOW_SMALL		0x6000	/* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE		0x7000	/* Large Model Descriptor List Mode */
-
-#define	DMAEN_P		0x0		/* Channel Enable */
-#define	WNR_P		0x1		/* Channel Direction (W/R*) */
-#define	DMA2D_P		0x4		/* 2D/1D* Mode */
-#define	RESTART_P	0x5		/* Restart */
-#define	DI_SEL_P	0x6		/* Data	Interrupt Select */
-#define	DI_EN_P		0x7		/* Data	Interrupt Enable */
-
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
-#define	DMA_DONE	0x0001	/* DMA Done Indicator */
-#define	DMA_ERR		0x0002	/* DMA Error Indicator */
-#define	DFETCH		0x0004	/* Descriptor Fetch Indicator */
-#define	DMA_RUN		0x0008	/* DMA Running Indicator */
-
-#define	DMA_DONE_P	0x0		/* DMA Done Indicator */
-#define	DMA_ERR_P	0x1		/* DMA Error Indicator */
-#define	DFETCH_P	0x2		/* Descriptor Fetch Indicator */
-#define	DMA_RUN_P	0x3		/* DMA Running Indicator */
 
 /* DMAx_PERIPHERAL_MAP,	MDMA_yy_PERIPHERAL_MAP Masks */
 
@@ -2625,1019 +2419,6 @@
 #define	RCV_FULL	0x000C		/*		Receive	FIFO Full (2 Bytes To Read) */
 
 
-/********************************* MXVR	MASKS ****************************************/
-
-/* MXVR_CONFIG Masks */
-
-#define	MXVREN	  0x00000001lu
-#define	MMSM	  0x00000002lu
-#define	ACTIVE	  0x00000004lu
-#define	SDELAY	  0x00000008lu
-#define	NCMRXEN	  0x00000010lu
-#define	RWRRXEN	  0x00000020lu
-#define	MTXEN	  0x00000040lu
-#define	MTXON	  0x00000080lu /*legacy*/
-#define	MTXONB	  0x00000080lu
-#define	EPARITY	  0x00000100lu
-#define	MSB	  0x00001E00lu
-#define	APRXEN	  0x00002000lu
-#define	WAKEUP	  0x00004000lu
-#define	LMECH	  0x00008000lu
-
-#ifdef _MISRA_RULES
-#define	SET_MSB(x)     (((x)&0xFu) << 0x9)
-#else
-#define	SET_MSB(x)     (((x)&0xF) << 0x9)
-#endif /* _MISRA_RULES */
-
-
-/* MXVR_PLL_CTL_0 Masks */
-
-#define	MXTALCEN  0x00000001lu
-#define	MXTALFEN  0x00000002lu
-#define	MPLLMS	  0x00000008lu
-#define	MXTALMUL  0x00000030lu
-#define	MPLLEN	  0x00000040lu
-#define	MPLLEN0	  0x00000040lu /* legacy */
-#define	MPLLEN1	  0x00000080lu /* legacy */
-#define	MMCLKEN	  0x00000100lu
-#define	MMCLKMUL  0x00001E00lu
-#define	MPLLRSTB  0x00002000lu
-#define	MPLLRSTB0 0x00002000lu /* legacy */
-#define	MPLLRSTB1 0x00004000lu /* legacy */
-#define	MBCLKEN	  0x00010000lu
-#define	MBCLKDIV  0x001E0000lu
-#define	MPLLCDR	  0x00200000lu
-#define	MPLLCDR0  0x00200000lu /* legacy */
-#define	MPLLCDR1  0x00400000lu /* legacy */
-#define	INVRX	  0x00800000lu
-#define	MFSEN	  0x01000000lu
-#define	MFSDIV	  0x1E000000lu
-#define	MFSSEL	  0x60000000lu
-#define	MFSSYNC	  0x80000000lu
-
-#define	MXTALMUL_256FS	 0x00000000lu /* legacy */
-#define	MXTALMUL_384FS	 0x00000010lu /* legacy */
-#define	MXTALMUL_512FS	 0x00000020lu /* legacy */
-#define	MXTALMUL_1024FS	 0x00000030lu
-
-#define	MMCLKMUL_1024FS	 0x00000000lu
-#define	MMCLKMUL_512FS	 0x00000200lu
-#define	MMCLKMUL_256FS	 0x00000400lu
-#define	MMCLKMUL_128FS	 0x00000600lu
-#define	MMCLKMUL_64FS	 0x00000800lu
-#define	MMCLKMUL_32FS	 0x00000A00lu
-#define	MMCLKMUL_16FS	 0x00000C00lu
-#define	MMCLKMUL_8FS	 0x00000E00lu
-#define	MMCLKMUL_4FS	 0x00001000lu
-#define	MMCLKMUL_2FS	 0x00001200lu
-#define	MMCLKMUL_1FS	 0x00001400lu
-#define	MMCLKMUL_1536FS	 0x00001A00lu
-#define	MMCLKMUL_768FS	 0x00001C00lu
-#define	MMCLKMUL_384FS	 0x00001E00lu
-
-#define	MBCLKDIV_DIV2	 0x00020000lu
-#define	MBCLKDIV_DIV4	 0x00040000lu
-#define	MBCLKDIV_DIV8	 0x00060000lu
-#define	MBCLKDIV_DIV16	 0x00080000lu
-#define	MBCLKDIV_DIV32	 0x000A0000lu
-#define	MBCLKDIV_DIV64	 0x000C0000lu
-#define	MBCLKDIV_DIV128	 0x000E0000lu
-#define	MBCLKDIV_DIV256	 0x00100000lu
-#define	MBCLKDIV_DIV512	 0x00120000lu
-#define	MBCLKDIV_DIV1024 0x00140000lu
-
-#define	MFSDIV_DIV2	 0x02000000lu
-#define	MFSDIV_DIV4	 0x04000000lu
-#define	MFSDIV_DIV8	 0x06000000lu
-#define	MFSDIV_DIV16	 0x08000000lu
-#define	MFSDIV_DIV32	 0x0A000000lu
-#define	MFSDIV_DIV64	 0x0C000000lu
-#define	MFSDIV_DIV128	 0x0E000000lu
-#define	MFSDIV_DIV256	 0x10000000lu
-#define	MFSDIV_DIV512	 0x12000000lu
-#define	MFSDIV_DIV1024	 0x14000000lu
-
-#define	MFSSEL_CLOCK	 0x00000000lu
-#define	MFSSEL_PULSE_HI	 0x20000000lu
-#define	MFSSEL_PULSE_LO	 0x40000000lu
-
-
-/* MXVR_PLL_CTL_1 Masks */
-
-#define	MSTO	   0x00000001lu
-#define	MSTO0	   0x00000001lu	/* legacy */
-#define	MHOGGD	   0x00000004lu
-#define	MHOGGD0	   0x00000004lu	/* legacy */
-#define	MHOGGD1	   0x00000008lu	/* legacy */
-#define	MSHAPEREN  0x00000010lu
-#define	MSHAPEREN0 0x00000010lu	/* legacy */
-#define	MSHAPEREN1 0x00000020lu	/* legacy */
-#define	MPLLCNTEN  0x00008000lu
-#define	MPLLCNT	   0xFFFF0000lu
-
-#ifdef _MISRA_RULES
-#define	SET_MPLLCNT(x)	   (((x)&0xFFFFu) << 0x10)
-#else
-#define	SET_MPLLCNT(x)	   (((x)&0xFFFF) << 0x10)
-#endif /* _MISRA_RULES */
-
-
-/* MXVR_PLL_CTL_2 Masks */
-
-#define	MSHAPERSEL 0x00000007lu
-#define	MCPSEL	   0x000000E0lu
-
-/* MXVR_INT_STAT_0 Masks */
-
-#define	NI2A  0x00000001lu
-#define	NA2I  0x00000002lu
-#define	SBU2L 0x00000004lu
-#define	SBL2U 0x00000008lu
-#define	PRU   0x00000010lu
-#define	MPRU  0x00000020lu
-#define	DRU   0x00000040lu
-#define	MDRU  0x00000080lu
-#define	SBU   0x00000100lu
-#define	ATU   0x00000200lu
-#define	FCZ0  0x00000400lu
-#define	FCZ1  0x00000800lu
-#define	PERR  0x00001000lu
-#define	MH2L  0x00002000lu
-#define	ML2H  0x00004000lu
-#define	WUP   0x00008000lu
-#define	FU2L  0x00010000lu
-#define	FL2U  0x00020000lu
-#define	BU2L  0x00040000lu
-#define	BL2U  0x00080000lu
-#define	PCZ   0x00400000lu
-#define	FERR  0x00800000lu
-#define	CMR   0x01000000lu
-#define	CMROF 0x02000000lu
-#define	CMTS  0x04000000lu
-#define	CMTC  0x08000000lu
-#define	RWRC  0x10000000lu
-#define	BCZ   0x20000000lu
-#define	BMERR 0x40000000lu
-#define	DERR  0x80000000lu
-
-
-/* MXVR_INT_EN_0 Masks */
-
-#define	NI2AEN	NI2A
-#define	NA2IEN	NA2I
-#define	SBU2LEN	SBU2L
-#define	SBL2UEN	SBL2U
-#define	PRUEN	PRU
-#define	MPRUEN	MPRU
-#define	DRUEN	DRU
-#define	MDRUEN	MDRU
-#define	SBUEN	SBU
-#define	ATUEN	ATU
-#define	FCZ0EN	FCZ0
-#define	FCZ1EN	FCZ1
-#define	PERREN	PERR
-#define	MH2LEN	MH2L
-#define	ML2HEN	ML2H
-#define	WUPEN	WUP
-#define	FU2LEN	FU2L
-#define	FL2UEN	FL2U
-#define	BU2LEN	BU2L
-#define	BL2UEN	BL2U
-#define	PCZEN	PCZ
-#define	FERREN	FERR
-#define	CMREN	CMR
-#define	CMROFEN	CMROF
-#define	CMTSEN	CMTS
-#define	CMTCEN	CMTC
-#define	RWRCEN	RWRC
-#define	BCZEN	BCZ
-#define	BMERREN	BMERR
-#define	DERREN	DERR
-
-
-/* MXVR_INT_STAT_1 Masks */
-
-#define	APR   0x00000004lu
-#define	APROF 0x00000008lu
-#define	APTS  0x00000040lu
-#define	APTC  0x00000080lu
-#define	APRCE 0x00000400lu
-#define	APRPE 0x00000800lu
-
-#define	HDONE0 0x00000001lu
-#define	DONE0  0x00000002lu
-#define	HDONE1 0x00000010lu
-#define	DONE1  0x00000020lu
-#define	HDONE2 0x00000100lu
-#define	DONE2  0x00000200lu
-#define	HDONE3 0x00001000lu
-#define	DONE3  0x00002000lu
-#define	HDONE4 0x00010000lu
-#define	DONE4  0x00020000lu
-#define	HDONE5 0x00100000lu
-#define	DONE5  0x00200000lu
-#define	HDONE6 0x01000000lu
-#define	DONE6  0x02000000lu
-#define	HDONE7 0x10000000lu
-#define	DONE7  0x20000000lu
-
-#define	DONEX(x) (0x00000002 <<	(4 * (x)))
-#define	HDONEX(x) (0x00000001 << (4 * (x)))
-
-
-/* MXVR_INT_EN_1 Masks */
-
-#define	APREN	APR
-#define	APROFEN	APROF
-#define	APTSEN	APTS
-#define	APTCEN	APTC
-#define	APRCEEN	APRCE
-#define	APRPEEN	APRPE
-
-#define	HDONEEN0 HDONE0
-#define	DONEEN0	 DONE0
-#define	HDONEEN1 HDONE1
-#define	DONEEN1	 DONE1
-#define	HDONEEN2 HDONE2
-#define	DONEEN2	 DONE2
-#define	HDONEEN3 HDONE3
-#define	DONEEN3	 DONE3
-#define	HDONEEN4 HDONE4
-#define	DONEEN4	 DONE4
-#define	HDONEEN5 HDONE5
-#define	DONEEN5	 DONE5
-#define	HDONEEN6 HDONE6
-#define	DONEEN6	 DONE6
-#define	HDONEEN7 HDONE7
-#define	DONEEN7	 DONE7
-
-#define	DONEENX(x) (0x00000002 << (4 * (x)))
-#define	HDONEENX(x) (0x00000001	<< (4 *	(x)))
-
-
-/* MXVR_STATE_0	Masks */
-
-#define	NACT	 0x00000001lu
-#define	SBLOCK	 0x00000002lu
-#define	PFDLOCK	 0x00000004lu
-#define	PFDLOCK0 0x00000004lu /* legacy */
-#define	PDD	 0x00000008lu
-#define	PDD0	 0x00000008lu /* legacy */
-#define	PVCO	 0x00000010lu
-#define	PVCO0	 0x00000010lu /* legacy */
-#define	PFDLOCK1 0x00000020lu /* legacy */
-#define	PDD1	 0x00000040lu /* legacy */
-#define	PVCO1	 0x00000080lu /* legacy */
-#define	APBSY	 0x00000100lu
-#define	APARB	 0x00000200lu
-#define	APTX	 0x00000400lu
-#define	APRX	 0x00000800lu
-#define	CMBSY	 0x00001000lu
-#define	CMARB	 0x00002000lu
-#define	CMTX	 0x00004000lu
-#define	CMRX	 0x00008000lu
-#define	MRXONB	 0x00010000lu
-#define	RGSIP	 0x00020000lu
-#define	DALIP	 0x00040000lu
-#define	ALIP	 0x00080000lu
-#define	RRDIP	 0x00100000lu
-#define	RWRIP	 0x00200000lu
-#define	FLOCK	 0x00400000lu
-#define	BLOCK	 0x00800000lu
-#define	RSB	 0x0F000000lu
-#define	DERRNUM	 0xF0000000lu
-
-
-/* MXVR_STATE_1	Masks */
-
-#define	STXNUMB	    0x0000000Flu
-#define	SRXNUMB	    0x000000F0lu
-#define	APCONT	    0x00000100lu
-#define	DMAACTIVEX  0x00FF0000lu
-#define	DMAACTIVE0  0x00010000lu
-#define	DMAACTIVE1  0x00020000lu
-#define	DMAACTIVE2  0x00040000lu
-#define	DMAACTIVE3  0x00080000lu
-#define	DMAACTIVE4  0x00100000lu
-#define	DMAACTIVE5  0x00200000lu
-#define	DMAACTIVE6  0x00400000lu
-#define	DMAACTIVE7  0x00800000lu
-#define	DMAPMENX    0xFF000000lu
-#define	DMAPMEN0    0x01000000lu
-#define	DMAPMEN1    0x02000000lu
-#define	DMAPMEN2    0x04000000lu
-#define	DMAPMEN3    0x08000000lu
-#define	DMAPMEN4    0x10000000lu
-#define	DMAPMEN5    0x20000000lu
-#define	DMAPMEN6    0x40000000lu
-#define	DMAPMEN7    0x80000000lu
-
-
-/* MXVR_POSITION Masks */
-
-#define	PVALID	     0x8000
-#define	POSITION     0x003F
-
-
-/* MXVR_MAX_POSITION Masks */
-
-#define	MPVALID	     0x8000
-#define	MPOSITION    0x003F
-
-
-/* MXVR_DELAY Masks */
-
-#define	DVALID	     0x8000
-#define	DELAY	     0x003F
-
-
-/* MXVR_MAX_DELAY Masks */
-
-#define	MDVALID	     0x8000
-#define	MDELAY	     0x003F
-
-
-/* MXVR_LADDR Masks */
-
-#define	LVALID	     0x80000000lu
-#define	LADDR	     0x0000FFFFlu
-
-
-/* MXVR_GADDR Masks */
-
-#define	GVALID	     0x8000
-#define	GADDRL	     0x00FF
-
-
-/* MXVR_AADDR Masks */
-
-#define	AVALID	     0x80000000lu
-#define	AADDR	     0x0000FFFFlu
-
-
-/* MXVR_ALLOC_0	Masks */
-
-#define	CIU0	     0x00000080lu
-#define	CIU1	     0x00008000lu
-#define	CIU2	     0x00800000lu
-#define	CIU3	     0x80000000lu
-
-#define	CL0	     0x0000007Flu
-#define	CL1	     0x00007F00lu
-#define	CL2	     0x007F0000lu
-#define	CL3	     0x7F000000lu
-
-
-/* MXVR_ALLOC_1	Masks */
-
-#define	CIU4	     0x00000080lu
-#define	CIU5	     0x00008000lu
-#define	CIU6	     0x00800000lu
-#define	CIU7	     0x80000000lu
-
-#define	CL4	     0x0000007Flu
-#define	CL5	     0x00007F00lu
-#define	CL6	     0x007F0000lu
-#define	CL7	     0x7F000000lu
-
-
-/* MXVR_ALLOC_2	Masks */
-
-#define	CIU8	     0x00000080lu
-#define	CIU9	     0x00008000lu
-#define	CIU10	     0x00800000lu
-#define	CIU11	     0x80000000lu
-
-#define	CL8	     0x0000007Flu
-#define	CL9	     0x00007F00lu
-#define	CL10	     0x007F0000lu
-#define	CL11	     0x7F000000lu
-
-
-/* MXVR_ALLOC_3	Masks */
-
-#define	CIU12	     0x00000080lu
-#define	CIU13	     0x00008000lu
-#define	CIU14	     0x00800000lu
-#define	CIU15	     0x80000000lu
-
-#define	CL12	     0x0000007Flu
-#define	CL13	     0x00007F00lu
-#define	CL14	     0x007F0000lu
-#define	CL15	     0x7F000000lu
-
-
-/* MXVR_ALLOC_4	Masks */
-
-#define	CIU16	     0x00000080lu
-#define	CIU17	     0x00008000lu
-#define	CIU18	     0x00800000lu
-#define	CIU19	     0x80000000lu
-
-#define	CL16	     0x0000007Flu
-#define	CL17	     0x00007F00lu
-#define	CL18	     0x007F0000lu
-#define	CL19	     0x7F000000lu
-
-
-/* MXVR_ALLOC_5	Masks */
-
-#define	CIU20	     0x00000080lu
-#define	CIU21	     0x00008000lu
-#define	CIU22	     0x00800000lu
-#define	CIU23	     0x80000000lu
-
-#define	CL20	     0x0000007Flu
-#define	CL21	     0x00007F00lu
-#define	CL22	     0x007F0000lu
-#define	CL23	     0x7F000000lu
-
-
-/* MXVR_ALLOC_6	Masks */
-
-#define	CIU24	     0x00000080lu
-#define	CIU25	     0x00008000lu
-#define	CIU26	     0x00800000lu
-#define	CIU27	     0x80000000lu
-
-#define	CL24	     0x0000007Flu
-#define	CL25	     0x00007F00lu
-#define	CL26	     0x007F0000lu
-#define	CL27	     0x7F000000lu
-
-
-/* MXVR_ALLOC_7	Masks */
-
-#define	CIU28	     0x00000080lu
-#define	CIU29	     0x00008000lu
-#define	CIU30	     0x00800000lu
-#define	CIU31	     0x80000000lu
-
-#define	CL28	     0x0000007Flu
-#define	CL29	     0x00007F00lu
-#define	CL30	     0x007F0000lu
-#define	CL31	     0x7F000000lu
-
-
-/* MXVR_ALLOC_8	Masks */
-
-#define	CIU32	     0x00000080lu
-#define	CIU33	     0x00008000lu
-#define	CIU34	     0x00800000lu
-#define	CIU35	     0x80000000lu
-
-#define	CL32	     0x0000007Flu
-#define	CL33	     0x00007F00lu
-#define	CL34	     0x007F0000lu
-#define	CL35	     0x7F000000lu
-
-
-/* MXVR_ALLOC_9	Masks */
-
-#define	CIU36	     0x00000080lu
-#define	CIU37	     0x00008000lu
-#define	CIU38	     0x00800000lu
-#define	CIU39	     0x80000000lu
-
-#define	CL36	     0x0000007Flu
-#define	CL37	     0x00007F00lu
-#define	CL38	     0x007F0000lu
-#define	CL39	     0x7F000000lu
-
-
-/* MXVR_ALLOC_10 Masks */
-
-#define	CIU40	     0x00000080lu
-#define	CIU41	     0x00008000lu
-#define	CIU42	     0x00800000lu
-#define	CIU43	     0x80000000lu
-
-#define	CL40	     0x0000007Flu
-#define	CL41	     0x00007F00lu
-#define	CL42	     0x007F0000lu
-#define	CL43	     0x7F000000lu
-
-
-/* MXVR_ALLOC_11 Masks */
-
-#define	CIU44	     0x00000080lu
-#define	CIU45	     0x00008000lu
-#define	CIU46	     0x00800000lu
-#define	CIU47	     0x80000000lu
-
-#define	CL44	     0x0000007Flu
-#define	CL45	     0x00007F00lu
-#define	CL46	     0x007F0000lu
-#define	CL47	     0x7F000000lu
-
-
-/* MXVR_ALLOC_12 Masks */
-
-#define	CIU48	     0x00000080lu
-#define	CIU49	     0x00008000lu
-#define	CIU50	     0x00800000lu
-#define	CIU51	     0x80000000lu
-
-#define	CL48	     0x0000007Flu
-#define	CL49	     0x00007F00lu
-#define	CL50	     0x007F0000lu
-#define	CL51	     0x7F000000lu
-
-
-/* MXVR_ALLOC_13 Masks */
-
-#define	CIU52	     0x00000080lu
-#define	CIU53	     0x00008000lu
-#define	CIU54	     0x00800000lu
-#define	CIU55	     0x80000000lu
-
-#define	CL52	     0x0000007Flu
-#define	CL53	     0x00007F00lu
-#define	CL54	     0x007F0000lu
-#define	CL55	     0x7F000000lu
-
-
-/* MXVR_ALLOC_14 Masks */
-
-#define	CIU56	     0x00000080lu
-#define	CIU57	     0x00008000lu
-#define	CIU58	     0x00800000lu
-#define	CIU59	     0x80000000lu
-
-#define	CL56	     0x0000007Flu
-#define	CL57	     0x00007F00lu
-#define	CL58	     0x007F0000lu
-#define	CL59	     0x7F000000lu
-
-
-/* MXVR_SYNC_LCHAN_0 Masks */
-
-#define	LCHANPC0     0x0000000Flu
-#define	LCHANPC1     0x000000F0lu
-#define	LCHANPC2     0x00000F00lu
-#define	LCHANPC3     0x0000F000lu
-#define	LCHANPC4     0x000F0000lu
-#define	LCHANPC5     0x00F00000lu
-#define	LCHANPC6     0x0F000000lu
-#define	LCHANPC7     0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_1 Masks */
-
-#define	LCHANPC8     0x0000000Flu
-#define	LCHANPC9     0x000000F0lu
-#define	LCHANPC10    0x00000F00lu
-#define	LCHANPC11    0x0000F000lu
-#define	LCHANPC12    0x000F0000lu
-#define	LCHANPC13    0x00F00000lu
-#define	LCHANPC14    0x0F000000lu
-#define	LCHANPC15    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_2 Masks */
-
-#define	LCHANPC16    0x0000000Flu
-#define	LCHANPC17    0x000000F0lu
-#define	LCHANPC18    0x00000F00lu
-#define	LCHANPC19    0x0000F000lu
-#define	LCHANPC20    0x000F0000lu
-#define	LCHANPC21    0x00F00000lu
-#define	LCHANPC22    0x0F000000lu
-#define	LCHANPC23    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_3 Masks */
-
-#define	LCHANPC24    0x0000000Flu
-#define	LCHANPC25    0x000000F0lu
-#define	LCHANPC26    0x00000F00lu
-#define	LCHANPC27    0x0000F000lu
-#define	LCHANPC28    0x000F0000lu
-#define	LCHANPC29    0x00F00000lu
-#define	LCHANPC30    0x0F000000lu
-#define	LCHANPC31    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_4 Masks */
-
-#define	LCHANPC32    0x0000000Flu
-#define	LCHANPC33    0x000000F0lu
-#define	LCHANPC34    0x00000F00lu
-#define	LCHANPC35    0x0000F000lu
-#define	LCHANPC36    0x000F0000lu
-#define	LCHANPC37    0x00F00000lu
-#define	LCHANPC38    0x0F000000lu
-#define	LCHANPC39    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_5 Masks */
-
-#define	LCHANPC40    0x0000000Flu
-#define	LCHANPC41    0x000000F0lu
-#define	LCHANPC42    0x00000F00lu
-#define	LCHANPC43    0x0000F000lu
-#define	LCHANPC44    0x000F0000lu
-#define	LCHANPC45    0x00F00000lu
-#define	LCHANPC46    0x0F000000lu
-#define	LCHANPC47    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_6 Masks */
-
-#define	LCHANPC48    0x0000000Flu
-#define	LCHANPC49    0x000000F0lu
-#define	LCHANPC50    0x00000F00lu
-#define	LCHANPC51    0x0000F000lu
-#define	LCHANPC52    0x000F0000lu
-#define	LCHANPC53    0x00F00000lu
-#define	LCHANPC54    0x0F000000lu
-#define	LCHANPC55    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_7 Masks */
-
-#define	LCHANPC56    0x0000000Flu
-#define	LCHANPC57    0x000000F0lu
-#define	LCHANPC58    0x00000F00lu
-#define	LCHANPC59    0x0000F000lu
-
-
-/* MXVR_DMAx_CONFIG Masks */
-
-#define	MDMAEN	    0x00000001lu
-#define	DD	    0x00000002lu
-#define	LCHAN	    0x000003C0lu
-#define	BITSWAPEN   0x00000400lu
-#define	BYSWAPEN    0x00000800lu
-#define	MFLOW	    0x00007000lu
-#define	FIXEDPM	    0x00080000lu
-#define	STARTPAT    0x00300000lu
-#define	STOPPAT	    0x00C00000lu
-#define	COUNTPOS    0x1C000000lu
-
-#define	DD_TX	    0x00000000lu
-#define	DD_RX	    0x00000002lu
-
-#define	LCHAN_0	    0x00000000lu
-#define	LCHAN_1	    0x00000040lu
-#define	LCHAN_2	    0x00000080lu
-#define	LCHAN_3	    0x000000C0lu
-#define	LCHAN_4	    0x00000100lu
-#define	LCHAN_5	    0x00000140lu
-#define	LCHAN_6	    0x00000180lu
-#define	LCHAN_7	    0x000001C0lu
-
-#define	MFLOW_STOP  0x00000000lu
-#define	MFLOW_AUTO  0x00001000lu
-#define	MFLOW_PVC   0x00002000lu
-#define	MFLOW_PSS   0x00003000lu
-#define	MFLOW_PFC   0x00004000lu
-
-#define	STARTPAT_0  0x00000000lu
-#define	STARTPAT_1  0x00100000lu
-
-#define	STOPPAT_0   0x00000000lu
-#define	STOPPAT_1   0x00400000lu
-
-#define	COUNTPOS_0  0x00000000lu
-#define	COUNTPOS_1  0x04000000lu
-#define	COUNTPOS_2  0x08000000lu
-#define	COUNTPOS_3  0x0C000000lu
-#define	COUNTPOS_4  0x10000000lu
-#define	COUNTPOS_5  0x14000000lu
-#define	COUNTPOS_6  0x18000000lu
-#define	COUNTPOS_7  0x1C000000lu
-
-
-/* MXVR_AP_CTL Masks */
-
-#define	STARTAP	   0x00000001lu
-#define	CANCELAP   0x00000002lu
-#define	RESETAP	   0x00000004lu
-#define	APRBE0	   0x00004000lu
-#define	APRBE1	   0x00008000lu
-#define	APRBEX	   0x0000C000lu
-
-
-/* MXVR_CM_CTL Masks */
-
-#define	STARTCM	   0x00000001lu
-#define	CANCELCM   0x00000002lu
-#define	CMRBEX	   0xFFFF0000lu
-#define	CMRBE0	   0x00010000lu
-#define	CMRBE1	   0x00020000lu
-#define	CMRBE2	   0x00040000lu
-#define	CMRBE3	   0x00080000lu
-#define	CMRBE4	   0x00100000lu
-#define	CMRBE5	   0x00200000lu
-#define	CMRBE6	   0x00400000lu
-#define	CMRBE7	   0x00800000lu
-#define	CMRBE8	   0x01000000lu
-#define	CMRBE9	   0x02000000lu
-#define	CMRBE10	   0x04000000lu
-#define	CMRBE11	   0x08000000lu
-#define	CMRBE12	   0x10000000lu
-#define	CMRBE13	   0x20000000lu
-#define	CMRBE14	   0x40000000lu
-#define	CMRBE15	   0x80000000lu
-
-
-/* MXVR_PAT_DATA_x Masks */
-
-#define	MATCH_DATA_0 0x000000FFlu
-#define	MATCH_DATA_1 0x0000FF00lu
-#define	MATCH_DATA_2 0x00FF0000lu
-#define	MATCH_DATA_3 0xFF000000lu
-
-
-
-/* MXVR_PAT_EN_x Masks */
-
-#define	MATCH_EN_0_0 0x00000001lu
-#define	MATCH_EN_0_1 0x00000002lu
-#define	MATCH_EN_0_2 0x00000004lu
-#define	MATCH_EN_0_3 0x00000008lu
-#define	MATCH_EN_0_4 0x00000010lu
-#define	MATCH_EN_0_5 0x00000020lu
-#define	MATCH_EN_0_6 0x00000040lu
-#define	MATCH_EN_0_7 0x00000080lu
-
-#define	MATCH_EN_1_0 0x00000100lu
-#define	MATCH_EN_1_1 0x00000200lu
-#define	MATCH_EN_1_2 0x00000400lu
-#define	MATCH_EN_1_3 0x00000800lu
-#define	MATCH_EN_1_4 0x00001000lu
-#define	MATCH_EN_1_5 0x00002000lu
-#define	MATCH_EN_1_6 0x00004000lu
-#define	MATCH_EN_1_7 0x00008000lu
-
-#define	MATCH_EN_2_0 0x00010000lu
-#define	MATCH_EN_2_1 0x00020000lu
-#define	MATCH_EN_2_2 0x00040000lu
-#define	MATCH_EN_2_3 0x00080000lu
-#define	MATCH_EN_2_4 0x00100000lu
-#define	MATCH_EN_2_5 0x00200000lu
-#define	MATCH_EN_2_6 0x00400000lu
-#define	MATCH_EN_2_7 0x00800000lu
-
-#define	MATCH_EN_3_0 0x01000000lu
-#define	MATCH_EN_3_1 0x02000000lu
-#define	MATCH_EN_3_2 0x04000000lu
-#define	MATCH_EN_3_3 0x08000000lu
-#define	MATCH_EN_3_4 0x10000000lu
-#define	MATCH_EN_3_5 0x20000000lu
-#define	MATCH_EN_3_6 0x40000000lu
-#define	MATCH_EN_3_7 0x80000000lu
-
-
-/* MXVR_ROUTING_0 Masks */
-
-#define	MUTE_CH0	0x00000080lu
-#define	MUTE_CH1	0x00008000lu
-#define	MUTE_CH2	0x00800000lu
-#define	MUTE_CH3	0x80000000lu
-
-#define	TX_CH0		0x0000007Flu
-#define	TX_CH1		0x00007F00lu
-#define	TX_CH2		0x007F0000lu
-#define	TX_CH3		0x7F000000lu
-
-
-/* MXVR_ROUTING_1 Masks */
-
-#define	MUTE_CH4	0x00000080lu
-#define	MUTE_CH5	0x00008000lu
-#define	MUTE_CH6	0x00800000lu
-#define	MUTE_CH7	0x80000000lu
-
-#define	TX_CH4		0x0000007Flu
-#define	TX_CH5		0x00007F00lu
-#define	TX_CH6		0x007F0000lu
-#define	TX_CH7		0x7F000000lu
-
-
-/* MXVR_ROUTING_2 Masks */
-
-#define	MUTE_CH8	0x00000080lu
-#define	MUTE_CH9	0x00008000lu
-#define	MUTE_CH10	0x00800000lu
-#define	MUTE_CH11	0x80000000lu
-
-#define	TX_CH8		0x0000007Flu
-#define	TX_CH9		0x00007F00lu
-#define	TX_CH10		0x007F0000lu
-#define	TX_CH11		0x7F000000lu
-
-/* MXVR_ROUTING_3 Masks */
-
-#define	MUTE_CH12	0x00000080lu
-#define	MUTE_CH13	0x00008000lu
-#define	MUTE_CH14	0x00800000lu
-#define	MUTE_CH15	0x80000000lu
-
-#define	TX_CH12		0x0000007Flu
-#define	TX_CH13		0x00007F00lu
-#define	TX_CH14		0x007F0000lu
-#define	TX_CH15		0x7F000000lu
-
-
-/* MXVR_ROUTING_4 Masks */
-
-#define	MUTE_CH16	0x00000080lu
-#define	MUTE_CH17	0x00008000lu
-#define	MUTE_CH18	0x00800000lu
-#define	MUTE_CH19	0x80000000lu
-
-#define	TX_CH16		0x0000007Flu
-#define	TX_CH17		0x00007F00lu
-#define	TX_CH18		0x007F0000lu
-#define	TX_CH19		0x7F000000lu
-
-
-/* MXVR_ROUTING_5 Masks */
-
-#define	MUTE_CH20	0x00000080lu
-#define	MUTE_CH21	0x00008000lu
-#define	MUTE_CH22	0x00800000lu
-#define	MUTE_CH23	0x80000000lu
-
-#define	TX_CH20		0x0000007Flu
-#define	TX_CH21		0x00007F00lu
-#define	TX_CH22		0x007F0000lu
-#define	TX_CH23		0x7F000000lu
-
-
-/* MXVR_ROUTING_6 Masks */
-
-#define	MUTE_CH24	0x00000080lu
-#define	MUTE_CH25	0x00008000lu
-#define	MUTE_CH26	0x00800000lu
-#define	MUTE_CH27	0x80000000lu
-
-#define	TX_CH24		0x0000007Flu
-#define	TX_CH25		0x00007F00lu
-#define	TX_CH26		0x007F0000lu
-#define	TX_CH27		0x7F000000lu
-
-
-/* MXVR_ROUTING_7 Masks */
-
-#define	MUTE_CH28	0x00000080lu
-#define	MUTE_CH29	0x00008000lu
-#define	MUTE_CH30	0x00800000lu
-#define	MUTE_CH31	0x80000000lu
-
-#define	TX_CH28		0x0000007Flu
-#define	TX_CH29		0x00007F00lu
-#define	TX_CH30		0x007F0000lu
-#define	TX_CH31		0x7F000000lu
-
-
-/* MXVR_ROUTING_8 Masks */
-
-#define	MUTE_CH32	0x00000080lu
-#define	MUTE_CH33	0x00008000lu
-#define	MUTE_CH34	0x00800000lu
-#define	MUTE_CH35	0x80000000lu
-
-#define	TX_CH32		0x0000007Flu
-#define	TX_CH33		0x00007F00lu
-#define	TX_CH34		0x007F0000lu
-#define	TX_CH35		0x7F000000lu
-
-
-/* MXVR_ROUTING_9 Masks */
-
-#define	MUTE_CH36	0x00000080lu
-#define	MUTE_CH37	0x00008000lu
-#define	MUTE_CH38	0x00800000lu
-#define	MUTE_CH39	0x80000000lu
-
-#define	TX_CH36		0x0000007Flu
-#define	TX_CH37		0x00007F00lu
-#define	TX_CH38		0x007F0000lu
-#define	TX_CH39		0x7F000000lu
-
-
-/* MXVR_ROUTING_10 Masks */
-
-#define	MUTE_CH40	0x00000080lu
-#define	MUTE_CH41	0x00008000lu
-#define	MUTE_CH42	0x00800000lu
-#define	MUTE_CH43	0x80000000lu
-
-#define	TX_CH40		0x0000007Flu
-#define	TX_CH41		0x00007F00lu
-#define	TX_CH42		0x007F0000lu
-#define	TX_CH43		0x7F000000lu
-
-
-/* MXVR_ROUTING_11 Masks */
-
-#define	MUTE_CH44	0x00000080lu
-#define	MUTE_CH45	0x00008000lu
-#define	MUTE_CH46	0x00800000lu
-#define	MUTE_CH47	0x80000000lu
-
-#define	TX_CH44		0x0000007Flu
-#define	TX_CH45		0x00007F00lu
-#define	TX_CH46		0x007F0000lu
-#define	TX_CH47		0x7F000000lu
-
-
-/* MXVR_ROUTING_12 Masks */
-
-#define	MUTE_CH48	0x00000080lu
-#define	MUTE_CH49	0x00008000lu
-#define	MUTE_CH50	0x00800000lu
-#define	MUTE_CH51	0x80000000lu
-
-#define	TX_CH48		0x0000007Flu
-#define	TX_CH49		0x00007F00lu
-#define	TX_CH50		0x007F0000lu
-#define	TX_CH51		0x7F000000lu
-
-
-/* MXVR_ROUTING_13 Masks */
-
-#define	MUTE_CH52	0x00000080lu
-#define	MUTE_CH53	0x00008000lu
-#define	MUTE_CH54	0x00800000lu
-#define	MUTE_CH55	0x80000000lu
-
-#define	TX_CH52		0x0000007Flu
-#define	TX_CH53		0x00007F00lu
-#define	TX_CH54		0x007F0000lu
-#define	TX_CH55		0x7F000000lu
-
-
-/* MXVR_ROUTING_14 Masks */
-
-#define	MUTE_CH56	0x00000080lu
-#define	MUTE_CH57	0x00008000lu
-#define	MUTE_CH58	0x00800000lu
-#define	MUTE_CH59	0x80000000lu
-
-#define	TX_CH56		0x0000007Flu
-#define	TX_CH57		0x00007F00lu
-#define	TX_CH58		0x007F0000lu
-#define	TX_CH59		0x7F000000lu
-
-
-/* Control Message Receive Buffer (CMRB) Address Offsets */
-
-#define	CMRB_STRIDE	  0x00000016lu
-
-#define	CMRB_DST_OFFSET	  0x00000000lu
-#define	CMRB_SRC_OFFSET	  0x00000002lu
-#define	CMRB_DATA_OFFSET  0x00000005lu
-
-
-/* Control Message Transmit Buffer (CMTB) Address Offsets */
-
-#define	CMTB_PRIO_OFFSET    0x00000000lu
-#define	CMTB_DST_OFFSET	    0x00000002lu
-#define	CMTB_SRC_OFFSET	    0x00000004lu
-#define	CMTB_TYPE_OFFSET    0x00000006lu
-#define	CMTB_DATA_OFFSET    0x00000007lu
-
-#define	CMTB_ANSWER_OFFSET  0x0000000Alu
-
-#define	CMTB_STAT_N_OFFSET  0x00000018lu
-#define	CMTB_STAT_A_OFFSET  0x00000016lu
-#define	CMTB_STAT_D_OFFSET  0x0000000Elu
-#define	CMTB_STAT_R_OFFSET  0x00000014lu
-#define	CMTB_STAT_W_OFFSET  0x00000014lu
-#define	CMTB_STAT_G_OFFSET  0x00000014lu
-
-
-/* Asynchronous	Packet Receive Buffer (APRB) Address Offsets */
-
-#define	APRB_STRIDE	  0x00000400lu
-
-#define	APRB_DST_OFFSET	  0x00000000lu
-#define	APRB_LEN_OFFSET	  0x00000002lu
-#define	APRB_SRC_OFFSET	  0x00000004lu
-#define	APRB_DATA_OFFSET  0x00000006lu
-
-
-/* Asynchronous	Packet Transmit	Buffer (APTB) Address Offsets */
-
-#define	APTB_PRIO_OFFSET  0x00000000lu
-#define	APTB_DST_OFFSET	  0x00000002lu
-#define	APTB_LEN_OFFSET	  0x00000004lu
-#define	APTB_SRC_OFFSET	  0x00000006lu
-#define	APTB_DATA_OFFSET  0x00000008lu
-
-
-/* Remote Read Buffer (RRDB) Address Offsets */
-
-#define	RRDB_WADDR_OFFSET 0x00000100lu
-#define	RRDB_WLEN_OFFSET  0x00000101lu
-
-
-
 /* ************	 CONTROLLER AREA NETWORK (CAN) MASKS  ***************/
 /* CAN_CONTROL Masks					 */
 #define	SRS			0x0001	/* Software Reset */
diff --git a/arch/blackfin/mach-bf538/include/mach/gpio.h b/arch/blackfin/mach-bf538/include/mach/gpio.h
index 295c78a..0c346fb 100644
--- a/arch/blackfin/mach-bf538/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf538/include/mach/gpio.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2008 Analog Devices Inc.
+ * Copyright (C) 2008-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -7,11 +7,8 @@
 #ifndef _MACH_GPIO_H_
 #define _MACH_GPIO_H_
 
-	/* FIXME:
-	 * For now only support PORTF GPIOs.
-	 * PORT C,D and E are for peripheral usage only
-	 */
 #define MAX_BLACKFIN_GPIOS 16
+#define BFIN_SPECIAL_GPIO_BANKS 3
 
 #define	GPIO_PF0	0	/* PF */
 #define	GPIO_PF1	1
diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h
index 6121cf8..0083ba1 100644
--- a/arch/blackfin/mach-bf538/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf538/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	64
 
 #define P_TMR2		(P_DONTCARE)
 #define P_TMR1		(P_DONTCARE)
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index a09623d..70189a0 100644
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -1,3 +1,27 @@
+config BF542
+	def_bool y
+	depends on BF542_std || BF542M
+config BF544
+	def_bool y
+	depends on BF544_std || BF544M
+config BF547
+	def_bool y
+	depends on BF547_std || BF547M
+config BF548
+	def_bool y
+	depends on BF548_std || BF548M
+config BF549
+	def_bool y
+	depends on BF549_std || BF549M
+
+config BF54xM
+	def_bool y
+	depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
+
+config BF54x
+	def_bool y
+	depends on (BF542 || BF544 || BF547 || BF548 || BF549)
+
 if (BF54x)
 
 source "arch/blackfin/mach-bf548/boards/Kconfig"
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 1a5286b..60193f7 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -62,7 +62,7 @@
 };
 
 static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760-hcd",
+	.name           = "isp1760",
 	.id             = 0,
 	.dev = {
 		.platform_data = &isp1760_priv,
@@ -154,7 +154,7 @@
 };
 #endif
 
-#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
 #include <asm/bfin_rotary.h>
 
 static struct bfin_rotary_platform_data bfin_rotary_data = {
@@ -186,7 +186,7 @@
 #endif
 
 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
-#include <linux/spi/adxl34x.h>
+#include <linux/input/adxl34x.h>
 static const struct adxl34x_platform_data adxl34x_info = {
 	.x_axis_offset = 0,
 	.y_axis_offset = 0,
@@ -210,14 +210,17 @@
 	.ev_code_y = ABS_Y,		/* EV_REL */
 	.ev_code_z = ABS_Z,		/* EV_REL */
 
-	.ev_code_tap_x = BTN_TOUCH,		/* EV_KEY */
-	.ev_code_tap_y = BTN_TOUCH,		/* EV_KEY */
-	.ev_code_tap_z = BTN_TOUCH,		/* EV_KEY */
+	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
 
 /*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
 /*	.ev_code_act_inactivity = KEY_A,*/	/* EV_KEY */
 	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 	.fifo_mode = ADXL_FIFO_STREAM,
+	.orientation_enable = ADXL_EN_ORIENTATION_3D,
+	.deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
+	.divisor_length = ADXL_LP_FILTER_DIVISOR_16,
+	/* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
+	.ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
 };
 #endif
 
@@ -461,6 +464,44 @@
 };
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+unsigned short bfin_can_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+	{
+		.start = 0xFFC02A00,
+		.end = 0xFFC02FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN0_RX,
+		.end = IRQ_CAN0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_TX,
+		.end = IRQ_CAN0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_ERROR,
+		.end = IRQ_CAN0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can_device = {
+	.name = "bfin_can",
+	.num_resources = ARRAY_SIZE(bfin_can_resources),
+	.resource = bfin_can_resources,
+	.dev = {
+		.platform_data = &bfin_can_peripherals, /* Passed to driver */
+	},
+};
+#endif
+
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 static struct resource bfin_atapi_resources[] = {
 	{
@@ -953,6 +994,10 @@
 	&bfin_isp1760_device,
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+	&bfin_can_device,
+#endif
+
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 	&bfin_atapi_device,
 #endif
@@ -974,7 +1019,7 @@
 	&bf54x_kpad_device,
 #endif
 
-#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
 	&bfin_rotary_device,
 #endif
 
diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
index 7bead5c..751e5e1 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf548.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf548.h
@@ -81,18 +81,6 @@
 
 #define AMGCTLVAL	(V_AMBEN | V_AMCKEN)
 
-#if defined(CONFIG_BF542M)
-# define CONFIG_BF542
-#elif defined(CONFIG_BF544M)
-# define CONFIG_BF544
-#elif defined(CONFIG_BF547M)
-# define CONFIG_BF547
-#elif defined(CONFIG_BF548M)
-# define CONFIG_BF548
-#elif defined(CONFIG_BF549M)
-# define CONFIG_BF549
-#endif
-
 #if defined(CONFIG_BF542)
 # define CPU   "BF542"
 # define CPUID 0x27de
diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index 13302b6..5684030 100644
--- a/arch/blackfin/mach-bf548/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -64,10 +64,4 @@
 #define OFFSET_THR              0x28	/* Transmit Holding register            */
 #define OFFSET_RBR              0x2C	/* Receive Buffer register              */
 
-/* PLL_DIV Masks */
-#define CCLK_DIV1 CSEL_DIV1	/* CCLK = VCO / 1 */
-#define CCLK_DIV2 CSEL_DIV2	/* CCLK = VCO / 2 */
-#define CCLK_DIV4 CSEL_DIV4	/* CCLK = VCO / 4 */
-#define CCLK_DIV8 CSEL_DIV8	/* CCLK = VCO / 8 */
-
 #endif
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
index 4234215..bc650e6 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
@@ -4,21 +4,21 @@
  * Licensed under the GPL-2 or later.
  */
 
-#ifndef _CDEF_BF548_H
-#define _CDEF_BF548_H
+#ifndef _CDEF_BF547_H
+#define _CDEF_BF547_H
 
 /* include all Core registers and bit definitions */
-#include "defBF548.h"
+#include "defBF547.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
 #include <asm/cdef_LPBlackfin.h>
 
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF547 */
 
 /* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
 #include "cdefBF54x_base.h"
 
-/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+/* The following are the #defines needed by ADSP-BF547 that are not in the common header */
 
 /* Timer Registers */
 
@@ -805,4 +805,4 @@
 #define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
 #define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
 
-#endif /* _CDEF_BF548_H */
+#endif /* _CDEF_BF547_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
index df84180..3523e08 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
@@ -18,165 +18,8 @@
 /* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
 #include "cdefBF54x_base.h"
 
-/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
-
-/* Timer Registers */
-
-#define bfin_read_TIMER8_CONFIG()	bfin_read16(TIMER8_CONFIG)
-#define bfin_write_TIMER8_CONFIG(val)	bfin_write16(TIMER8_CONFIG, val)
-#define bfin_read_TIMER8_COUNTER()	bfin_read32(TIMER8_COUNTER)
-#define bfin_write_TIMER8_COUNTER(val)	bfin_write32(TIMER8_COUNTER, val)
-#define bfin_read_TIMER8_PERIOD()	bfin_read32(TIMER8_PERIOD)
-#define bfin_write_TIMER8_PERIOD(val)	bfin_write32(TIMER8_PERIOD, val)
-#define bfin_read_TIMER8_WIDTH()	bfin_read32(TIMER8_WIDTH)
-#define bfin_write_TIMER8_WIDTH(val)	bfin_write32(TIMER8_WIDTH, val)
-#define bfin_read_TIMER9_CONFIG()	bfin_read16(TIMER9_CONFIG)
-#define bfin_write_TIMER9_CONFIG(val)	bfin_write16(TIMER9_CONFIG, val)
-#define bfin_read_TIMER9_COUNTER()	bfin_read32(TIMER9_COUNTER)
-#define bfin_write_TIMER9_COUNTER(val)	bfin_write32(TIMER9_COUNTER, val)
-#define bfin_read_TIMER9_PERIOD()	bfin_read32(TIMER9_PERIOD)
-#define bfin_write_TIMER9_PERIOD(val)	bfin_write32(TIMER9_PERIOD, val)
-#define bfin_read_TIMER9_WIDTH()	bfin_read32(TIMER9_WIDTH)
-#define bfin_write_TIMER9_WIDTH(val)	bfin_write32(TIMER9_WIDTH, val)
-#define bfin_read_TIMER10_CONFIG()	bfin_read16(TIMER10_CONFIG)
-#define bfin_write_TIMER10_CONFIG(val)	bfin_write16(TIMER10_CONFIG, val)
-#define bfin_read_TIMER10_COUNTER()	bfin_read32(TIMER10_COUNTER)
-#define bfin_write_TIMER10_COUNTER(val)	bfin_write32(TIMER10_COUNTER, val)
-#define bfin_read_TIMER10_PERIOD()	bfin_read32(TIMER10_PERIOD)
-#define bfin_write_TIMER10_PERIOD(val)	bfin_write32(TIMER10_PERIOD, val)
-#define bfin_read_TIMER10_WIDTH()	bfin_read32(TIMER10_WIDTH)
-#define bfin_write_TIMER10_WIDTH(val)	bfin_write32(TIMER10_WIDTH, val)
-
-/* Timer Groubfin_read_() of 3 */
-
-#define bfin_read_TIMER_ENABLE1()	bfin_read16(TIMER_ENABLE1)
-#define bfin_write_TIMER_ENABLE1(val)	bfin_write16(TIMER_ENABLE1, val)
-#define bfin_read_TIMER_DISABLE1()	bfin_read16(TIMER_DISABLE1)
-#define bfin_write_TIMER_DISABLE1(val)	bfin_write16(TIMER_DISABLE1, val)
-#define bfin_read_TIMER_STATUS1()	bfin_read32(TIMER_STATUS1)
-#define bfin_write_TIMER_STATUS1(val)	bfin_write32(TIMER_STATUS1, val)
-
-/* SPORT0 Registers */
-
-#define bfin_read_SPORT0_TCR1()		bfin_read16(SPORT0_TCR1)
-#define bfin_write_SPORT0_TCR1(val)	bfin_write16(SPORT0_TCR1, val)
-#define bfin_read_SPORT0_TCR2()		bfin_read16(SPORT0_TCR2)
-#define bfin_write_SPORT0_TCR2(val)	bfin_write16(SPORT0_TCR2, val)
-#define bfin_read_SPORT0_TCLKDIV()	bfin_read16(SPORT0_TCLKDIV)
-#define bfin_write_SPORT0_TCLKDIV(val)	bfin_write16(SPORT0_TCLKDIV, val)
-#define bfin_read_SPORT0_TFSDIV()	bfin_read16(SPORT0_TFSDIV)
-#define bfin_write_SPORT0_TFSDIV(val)	bfin_write16(SPORT0_TFSDIV, val)
-#define bfin_read_SPORT0_TX()		bfin_read32(SPORT0_TX)
-#define bfin_write_SPORT0_TX(val)	bfin_write32(SPORT0_TX, val)
-#define bfin_read_SPORT0_RX()		bfin_read32(SPORT0_RX)
-#define bfin_write_SPORT0_RX(val)	bfin_write32(SPORT0_RX, val)
-#define bfin_read_SPORT0_RCR1()		bfin_read16(SPORT0_RCR1)
-#define bfin_write_SPORT0_RCR1(val)	bfin_write16(SPORT0_RCR1, val)
-#define bfin_read_SPORT0_RCR2()		bfin_read16(SPORT0_RCR2)
-#define bfin_write_SPORT0_RCR2(val)	bfin_write16(SPORT0_RCR2, val)
-#define bfin_read_SPORT0_RCLKDIV()	bfin_read16(SPORT0_RCLKDIV)
-#define bfin_write_SPORT0_RCLKDIV(val)	bfin_write16(SPORT0_RCLKDIV, val)
-#define bfin_read_SPORT0_RFSDIV()	bfin_read16(SPORT0_RFSDIV)
-#define bfin_write_SPORT0_RFSDIV(val)	bfin_write16(SPORT0_RFSDIV, val)
-#define bfin_read_SPORT0_STAT()		bfin_read16(SPORT0_STAT)
-#define bfin_write_SPORT0_STAT(val)	bfin_write16(SPORT0_STAT, val)
-#define bfin_read_SPORT0_CHNL()		bfin_read16(SPORT0_CHNL)
-#define bfin_write_SPORT0_CHNL(val)	bfin_write16(SPORT0_CHNL, val)
-#define bfin_read_SPORT0_MCMC1()	bfin_read16(SPORT0_MCMC1)
-#define bfin_write_SPORT0_MCMC1(val)	bfin_write16(SPORT0_MCMC1, val)
-#define bfin_read_SPORT0_MCMC2()	bfin_read16(SPORT0_MCMC2)
-#define bfin_write_SPORT0_MCMC2(val)	bfin_write16(SPORT0_MCMC2, val)
-#define bfin_read_SPORT0_MTCS0()	bfin_read32(SPORT0_MTCS0)
-#define bfin_write_SPORT0_MTCS0(val)	bfin_write32(SPORT0_MTCS0, val)
-#define bfin_read_SPORT0_MTCS1()	bfin_read32(SPORT0_MTCS1)
-#define bfin_write_SPORT0_MTCS1(val)	bfin_write32(SPORT0_MTCS1, val)
-#define bfin_read_SPORT0_MTCS2()	bfin_read32(SPORT0_MTCS2)
-#define bfin_write_SPORT0_MTCS2(val)	bfin_write32(SPORT0_MTCS2, val)
-#define bfin_read_SPORT0_MTCS3()	bfin_read32(SPORT0_MTCS3)
-#define bfin_write_SPORT0_MTCS3(val)	bfin_write32(SPORT0_MTCS3, val)
-#define bfin_read_SPORT0_MRCS0()	bfin_read32(SPORT0_MRCS0)
-#define bfin_write_SPORT0_MRCS0(val)	bfin_write32(SPORT0_MRCS0, val)
-#define bfin_read_SPORT0_MRCS1()	bfin_read32(SPORT0_MRCS1)
-#define bfin_write_SPORT0_MRCS1(val)	bfin_write32(SPORT0_MRCS1, val)
-#define bfin_read_SPORT0_MRCS2()	bfin_read32(SPORT0_MRCS2)
-#define bfin_write_SPORT0_MRCS2(val)	bfin_write32(SPORT0_MRCS2, val)
-#define bfin_read_SPORT0_MRCS3()	bfin_read32(SPORT0_MRCS3)
-#define bfin_write_SPORT0_MRCS3(val)	bfin_write32(SPORT0_MRCS3, val)
-
-/* EPPI0 Registers */
-
-#define bfin_read_EPPI0_STATUS()	bfin_read16(EPPI0_STATUS)
-#define bfin_write_EPPI0_STATUS(val)	bfin_write16(EPPI0_STATUS, val)
-#define bfin_read_EPPI0_HCOUNT()	bfin_read16(EPPI0_HCOUNT)
-#define bfin_write_EPPI0_HCOUNT(val)	bfin_write16(EPPI0_HCOUNT, val)
-#define bfin_read_EPPI0_HDELAY()	bfin_read16(EPPI0_HDELAY)
-#define bfin_write_EPPI0_HDELAY(val)	bfin_write16(EPPI0_HDELAY, val)
-#define bfin_read_EPPI0_VCOUNT()	bfin_read16(EPPI0_VCOUNT)
-#define bfin_write_EPPI0_VCOUNT(val)	bfin_write16(EPPI0_VCOUNT, val)
-#define bfin_read_EPPI0_VDELAY()	bfin_read16(EPPI0_VDELAY)
-#define bfin_write_EPPI0_VDELAY(val)	bfin_write16(EPPI0_VDELAY, val)
-#define bfin_read_EPPI0_FRAME()		bfin_read16(EPPI0_FRAME)
-#define bfin_write_EPPI0_FRAME(val)	bfin_write16(EPPI0_FRAME, val)
-#define bfin_read_EPPI0_LINE()		bfin_read16(EPPI0_LINE)
-#define bfin_write_EPPI0_LINE(val)	bfin_write16(EPPI0_LINE, val)
-#define bfin_read_EPPI0_CLKDIV()	bfin_read16(EPPI0_CLKDIV)
-#define bfin_write_EPPI0_CLKDIV(val)	bfin_write16(EPPI0_CLKDIV, val)
-#define bfin_read_EPPI0_CONTROL()	bfin_read32(EPPI0_CONTROL)
-#define bfin_write_EPPI0_CONTROL(val)	bfin_write32(EPPI0_CONTROL, val)
-#define bfin_read_EPPI0_FS1W_HBL()	bfin_read32(EPPI0_FS1W_HBL)
-#define bfin_write_EPPI0_FS1W_HBL(val)	bfin_write32(EPPI0_FS1W_HBL, val)
-#define bfin_read_EPPI0_FS1P_AVPL()	bfin_read32(EPPI0_FS1P_AVPL)
-#define bfin_write_EPPI0_FS1P_AVPL(val)	bfin_write32(EPPI0_FS1P_AVPL, val)
-#define bfin_read_EPPI0_FS2W_LVB()	bfin_read32(EPPI0_FS2W_LVB)
-#define bfin_write_EPPI0_FS2W_LVB(val)	bfin_write32(EPPI0_FS2W_LVB, val)
-#define bfin_read_EPPI0_FS2P_LAVF()	bfin_read32(EPPI0_FS2P_LAVF)
-#define bfin_write_EPPI0_FS2P_LAVF(val)	bfin_write32(EPPI0_FS2P_LAVF, val)
-#define bfin_read_EPPI0_CLIP()		bfin_read32(EPPI0_CLIP)
-#define bfin_write_EPPI0_CLIP(val)	bfin_write32(EPPI0_CLIP, val)
-
-/* UART2 Registers */
-
-#define bfin_read_UART2_DLL()		bfin_read16(UART2_DLL)
-#define bfin_write_UART2_DLL(val)	bfin_write16(UART2_DLL, val)
-#define bfin_read_UART2_DLH()		bfin_read16(UART2_DLH)
-#define bfin_write_UART2_DLH(val)	bfin_write16(UART2_DLH, val)
-#define bfin_read_UART2_GCTL()		bfin_read16(UART2_GCTL)
-#define bfin_write_UART2_GCTL(val)	bfin_write16(UART2_GCTL, val)
-#define bfin_read_UART2_LCR()		bfin_read16(UART2_LCR)
-#define bfin_write_UART2_LCR(val)	bfin_write16(UART2_LCR, val)
-#define bfin_read_UART2_MCR()		bfin_read16(UART2_MCR)
-#define bfin_write_UART2_MCR(val)	bfin_write16(UART2_MCR, val)
-#define bfin_read_UART2_LSR()		bfin_read16(UART2_LSR)
-#define bfin_write_UART2_LSR(val)	bfin_write16(UART2_LSR, val)
-#define bfin_read_UART2_MSR()		bfin_read16(UART2_MSR)
-#define bfin_write_UART2_MSR(val)	bfin_write16(UART2_MSR, val)
-#define bfin_read_UART2_SCR()		bfin_read16(UART2_SCR)
-#define bfin_write_UART2_SCR(val)	bfin_write16(UART2_SCR, val)
-#define bfin_read_UART2_IER_SET()	bfin_read16(UART2_IER_SET)
-#define bfin_write_UART2_IER_SET(val)	bfin_write16(UART2_IER_SET, val)
-#define bfin_read_UART2_IER_CLEAR()	bfin_read16(UART2_IER_CLEAR)
-#define bfin_write_UART2_IER_CLEAR(val)	bfin_write16(UART2_IER_CLEAR, val)
-#define bfin_read_UART2_RBR()		bfin_read16(UART2_RBR)
-#define bfin_write_UART2_RBR(val)	bfin_write16(UART2_RBR, val)
-
-/* Two Wire Interface Registers (TWI1) */
-
-/* SPI2  Registers */
-
-#define bfin_read_SPI2_CTL()		bfin_read16(SPI2_CTL)
-#define bfin_write_SPI2_CTL(val)	bfin_write16(SPI2_CTL, val)
-#define bfin_read_SPI2_FLG()		bfin_read16(SPI2_FLG)
-#define bfin_write_SPI2_FLG(val)	bfin_write16(SPI2_FLG, val)
-#define bfin_read_SPI2_STAT()		bfin_read16(SPI2_STAT)
-#define bfin_write_SPI2_STAT(val)	bfin_write16(SPI2_STAT, val)
-#define bfin_read_SPI2_TDBR()		bfin_read16(SPI2_TDBR)
-#define bfin_write_SPI2_TDBR(val)	bfin_write16(SPI2_TDBR, val)
-#define bfin_read_SPI2_RDBR()		bfin_read16(SPI2_RDBR)
-#define bfin_write_SPI2_RDBR(val)	bfin_write16(SPI2_RDBR, val)
-#define bfin_read_SPI2_BAUD()		bfin_read16(SPI2_BAUD)
-#define bfin_write_SPI2_BAUD(val)	bfin_write16(SPI2_BAUD, val)
-#define bfin_read_SPI2_SHADOW()		bfin_read16(SPI2_SHADOW)
-#define bfin_write_SPI2_SHADOW(val)	bfin_write16(SPI2_SHADOW, val)
+/* The BF548 is like the BF547, but has additional CANs */
+#include "cdefBF547.h"
 
 /* CAN Controller 1 Config 1 Registers */
 
@@ -923,631 +766,4 @@
 #define bfin_read_CAN1_MB31_ID1()		bfin_read16(CAN1_MB31_ID1)
 #define bfin_write_CAN1_MB31_ID1(val)		bfin_write16(CAN1_MB31_ID1, val)
 
-/* ATAPI Registers */
-
-#define bfin_read_ATAPI_CONTROL()		bfin_read16(ATAPI_CONTROL)
-#define bfin_write_ATAPI_CONTROL(val)		bfin_write16(ATAPI_CONTROL, val)
-#define bfin_read_ATAPI_STATUS()		bfin_read16(ATAPI_STATUS)
-#define bfin_write_ATAPI_STATUS(val)		bfin_write16(ATAPI_STATUS, val)
-#define bfin_read_ATAPI_DEV_ADDR()		bfin_read16(ATAPI_DEV_ADDR)
-#define bfin_write_ATAPI_DEV_ADDR(val)		bfin_write16(ATAPI_DEV_ADDR, val)
-#define bfin_read_ATAPI_DEV_TXBUF()		bfin_read16(ATAPI_DEV_TXBUF)
-#define bfin_write_ATAPI_DEV_TXBUF(val)		bfin_write16(ATAPI_DEV_TXBUF, val)
-#define bfin_read_ATAPI_DEV_RXBUF()		bfin_read16(ATAPI_DEV_RXBUF)
-#define bfin_write_ATAPI_DEV_RXBUF(val)		bfin_write16(ATAPI_DEV_RXBUF, val)
-#define bfin_read_ATAPI_INT_MASK()		bfin_read16(ATAPI_INT_MASK)
-#define bfin_write_ATAPI_INT_MASK(val)		bfin_write16(ATAPI_INT_MASK, val)
-#define bfin_read_ATAPI_INT_STATUS()		bfin_read16(ATAPI_INT_STATUS)
-#define bfin_write_ATAPI_INT_STATUS(val)	bfin_write16(ATAPI_INT_STATUS, val)
-#define bfin_read_ATAPI_XFER_LEN()		bfin_read16(ATAPI_XFER_LEN)
-#define bfin_write_ATAPI_XFER_LEN(val)		bfin_write16(ATAPI_XFER_LEN, val)
-#define bfin_read_ATAPI_LINE_STATUS()		bfin_read16(ATAPI_LINE_STATUS)
-#define bfin_write_ATAPI_LINE_STATUS(val)	bfin_write16(ATAPI_LINE_STATUS, val)
-#define bfin_read_ATAPI_SM_STATE()		bfin_read16(ATAPI_SM_STATE)
-#define bfin_write_ATAPI_SM_STATE(val)		bfin_write16(ATAPI_SM_STATE, val)
-#define bfin_read_ATAPI_TERMINATE()		bfin_read16(ATAPI_TERMINATE)
-#define bfin_write_ATAPI_TERMINATE(val)		bfin_write16(ATAPI_TERMINATE, val)
-#define bfin_read_ATAPI_PIO_TFRCNT()		bfin_read16(ATAPI_PIO_TFRCNT)
-#define bfin_write_ATAPI_PIO_TFRCNT(val)	bfin_write16(ATAPI_PIO_TFRCNT, val)
-#define bfin_read_ATAPI_DMA_TFRCNT()		bfin_read16(ATAPI_DMA_TFRCNT)
-#define bfin_write_ATAPI_DMA_TFRCNT(val)	bfin_write16(ATAPI_DMA_TFRCNT, val)
-#define bfin_read_ATAPI_UMAIN_TFRCNT()		bfin_read16(ATAPI_UMAIN_TFRCNT)
-#define bfin_write_ATAPI_UMAIN_TFRCNT(val)	bfin_write16(ATAPI_UMAIN_TFRCNT, val)
-#define bfin_read_ATAPI_UDMAOUT_TFRCNT()	bfin_read16(ATAPI_UDMAOUT_TFRCNT)
-#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val)	bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
-#define bfin_read_ATAPI_REG_TIM_0()		bfin_read16(ATAPI_REG_TIM_0)
-#define bfin_write_ATAPI_REG_TIM_0(val)		bfin_write16(ATAPI_REG_TIM_0, val)
-#define bfin_read_ATAPI_PIO_TIM_0()		bfin_read16(ATAPI_PIO_TIM_0)
-#define bfin_write_ATAPI_PIO_TIM_0(val)		bfin_write16(ATAPI_PIO_TIM_0, val)
-#define bfin_read_ATAPI_PIO_TIM_1()		bfin_read16(ATAPI_PIO_TIM_1)
-#define bfin_write_ATAPI_PIO_TIM_1(val)		bfin_write16(ATAPI_PIO_TIM_1, val)
-#define bfin_read_ATAPI_MULTI_TIM_0()		bfin_read16(ATAPI_MULTI_TIM_0)
-#define bfin_write_ATAPI_MULTI_TIM_0(val)	bfin_write16(ATAPI_MULTI_TIM_0, val)
-#define bfin_read_ATAPI_MULTI_TIM_1()		bfin_read16(ATAPI_MULTI_TIM_1)
-#define bfin_write_ATAPI_MULTI_TIM_1(val)	bfin_write16(ATAPI_MULTI_TIM_1, val)
-#define bfin_read_ATAPI_MULTI_TIM_2()		bfin_read16(ATAPI_MULTI_TIM_2)
-#define bfin_write_ATAPI_MULTI_TIM_2(val)	bfin_write16(ATAPI_MULTI_TIM_2, val)
-#define bfin_read_ATAPI_ULTRA_TIM_0()		bfin_read16(ATAPI_ULTRA_TIM_0)
-#define bfin_write_ATAPI_ULTRA_TIM_0(val)	bfin_write16(ATAPI_ULTRA_TIM_0, val)
-#define bfin_read_ATAPI_ULTRA_TIM_1()		bfin_read16(ATAPI_ULTRA_TIM_1)
-#define bfin_write_ATAPI_ULTRA_TIM_1(val)	bfin_write16(ATAPI_ULTRA_TIM_1, val)
-#define bfin_read_ATAPI_ULTRA_TIM_2()		bfin_read16(ATAPI_ULTRA_TIM_2)
-#define bfin_write_ATAPI_ULTRA_TIM_2(val)	bfin_write16(ATAPI_ULTRA_TIM_2, val)
-#define bfin_read_ATAPI_ULTRA_TIM_3()		bfin_read16(ATAPI_ULTRA_TIM_3)
-#define bfin_write_ATAPI_ULTRA_TIM_3(val)	bfin_write16(ATAPI_ULTRA_TIM_3, val)
-
-/* SDH Registers */
-
-#define bfin_read_SDH_PWR_CTL()		bfin_read16(SDH_PWR_CTL)
-#define bfin_write_SDH_PWR_CTL(val)	bfin_write16(SDH_PWR_CTL, val)
-#define bfin_read_SDH_CLK_CTL()		bfin_read16(SDH_CLK_CTL)
-#define bfin_write_SDH_CLK_CTL(val)	bfin_write16(SDH_CLK_CTL, val)
-#define bfin_read_SDH_ARGUMENT()	bfin_read32(SDH_ARGUMENT)
-#define bfin_write_SDH_ARGUMENT(val)	bfin_write32(SDH_ARGUMENT, val)
-#define bfin_read_SDH_COMMAND()		bfin_read16(SDH_COMMAND)
-#define bfin_write_SDH_COMMAND(val)	bfin_write16(SDH_COMMAND, val)
-#define bfin_read_SDH_RESP_CMD()	bfin_read16(SDH_RESP_CMD)
-#define bfin_write_SDH_RESP_CMD(val)	bfin_write16(SDH_RESP_CMD, val)
-#define bfin_read_SDH_RESPONSE0()	bfin_read32(SDH_RESPONSE0)
-#define bfin_write_SDH_RESPONSE0(val)	bfin_write32(SDH_RESPONSE0, val)
-#define bfin_read_SDH_RESPONSE1()	bfin_read32(SDH_RESPONSE1)
-#define bfin_write_SDH_RESPONSE1(val)	bfin_write32(SDH_RESPONSE1, val)
-#define bfin_read_SDH_RESPONSE2()	bfin_read32(SDH_RESPONSE2)
-#define bfin_write_SDH_RESPONSE2(val)	bfin_write32(SDH_RESPONSE2, val)
-#define bfin_read_SDH_RESPONSE3()	bfin_read32(SDH_RESPONSE3)
-#define bfin_write_SDH_RESPONSE3(val)	bfin_write32(SDH_RESPONSE3, val)
-#define bfin_read_SDH_DATA_TIMER()	bfin_read32(SDH_DATA_TIMER)
-#define bfin_write_SDH_DATA_TIMER(val)	bfin_write32(SDH_DATA_TIMER, val)
-#define bfin_read_SDH_DATA_LGTH()	bfin_read16(SDH_DATA_LGTH)
-#define bfin_write_SDH_DATA_LGTH(val)	bfin_write16(SDH_DATA_LGTH, val)
-#define bfin_read_SDH_DATA_CTL()	bfin_read16(SDH_DATA_CTL)
-#define bfin_write_SDH_DATA_CTL(val)	bfin_write16(SDH_DATA_CTL, val)
-#define bfin_read_SDH_DATA_CNT()	bfin_read16(SDH_DATA_CNT)
-#define bfin_write_SDH_DATA_CNT(val)	bfin_write16(SDH_DATA_CNT, val)
-#define bfin_read_SDH_STATUS()		bfin_read32(SDH_STATUS)
-#define bfin_write_SDH_STATUS(val)	bfin_write32(SDH_STATUS, val)
-#define bfin_read_SDH_STATUS_CLR()	bfin_read16(SDH_STATUS_CLR)
-#define bfin_write_SDH_STATUS_CLR(val)	bfin_write16(SDH_STATUS_CLR, val)
-#define bfin_read_SDH_MASK0()		bfin_read32(SDH_MASK0)
-#define bfin_write_SDH_MASK0(val)	bfin_write32(SDH_MASK0, val)
-#define bfin_read_SDH_MASK1()		bfin_read32(SDH_MASK1)
-#define bfin_write_SDH_MASK1(val)	bfin_write32(SDH_MASK1, val)
-#define bfin_read_SDH_FIFO_CNT()	bfin_read16(SDH_FIFO_CNT)
-#define bfin_write_SDH_FIFO_CNT(val)	bfin_write16(SDH_FIFO_CNT, val)
-#define bfin_read_SDH_FIFO()		bfin_read32(SDH_FIFO)
-#define bfin_write_SDH_FIFO(val)	bfin_write32(SDH_FIFO, val)
-#define bfin_read_SDH_E_STATUS()	bfin_read16(SDH_E_STATUS)
-#define bfin_write_SDH_E_STATUS(val)	bfin_write16(SDH_E_STATUS, val)
-#define bfin_read_SDH_E_MASK()		bfin_read16(SDH_E_MASK)
-#define bfin_write_SDH_E_MASK(val)	bfin_write16(SDH_E_MASK, val)
-#define bfin_read_SDH_CFG()		bfin_read16(SDH_CFG)
-#define bfin_write_SDH_CFG(val)		bfin_write16(SDH_CFG, val)
-#define bfin_read_SDH_RD_WAIT_EN()	bfin_read16(SDH_RD_WAIT_EN)
-#define bfin_write_SDH_RD_WAIT_EN(val)	bfin_write16(SDH_RD_WAIT_EN, val)
-#define bfin_read_SDH_PID0()		bfin_read16(SDH_PID0)
-#define bfin_write_SDH_PID0(val)	bfin_write16(SDH_PID0, val)
-#define bfin_read_SDH_PID1()		bfin_read16(SDH_PID1)
-#define bfin_write_SDH_PID1(val)	bfin_write16(SDH_PID1, val)
-#define bfin_read_SDH_PID2()		bfin_read16(SDH_PID2)
-#define bfin_write_SDH_PID2(val)	bfin_write16(SDH_PID2, val)
-#define bfin_read_SDH_PID3()		bfin_read16(SDH_PID3)
-#define bfin_write_SDH_PID3(val)	bfin_write16(SDH_PID3, val)
-#define bfin_read_SDH_PID4()		bfin_read16(SDH_PID4)
-#define bfin_write_SDH_PID4(val)	bfin_write16(SDH_PID4, val)
-#define bfin_read_SDH_PID5()		bfin_read16(SDH_PID5)
-#define bfin_write_SDH_PID5(val)	bfin_write16(SDH_PID5, val)
-#define bfin_read_SDH_PID6()		bfin_read16(SDH_PID6)
-#define bfin_write_SDH_PID6(val)	bfin_write16(SDH_PID6, val)
-#define bfin_read_SDH_PID7()		bfin_read16(SDH_PID7)
-#define bfin_write_SDH_PID7(val)	bfin_write16(SDH_PID7, val)
-
-/* HOST Port Registers */
-
-#define bfin_read_HOST_CONTROL()	bfin_read16(HOST_CONTROL)
-#define bfin_write_HOST_CONTROL(val)	bfin_write16(HOST_CONTROL, val)
-#define bfin_read_HOST_STATUS()		bfin_read16(HOST_STATUS)
-#define bfin_write_HOST_STATUS(val)	bfin_write16(HOST_STATUS, val)
-#define bfin_read_HOST_TIMEOUT()	bfin_read16(HOST_TIMEOUT)
-#define bfin_write_HOST_TIMEOUT(val)	bfin_write16(HOST_TIMEOUT, val)
-
-/* USB Control Registers */
-
-#define bfin_read_USB_FADDR()		bfin_read16(USB_FADDR)
-#define bfin_write_USB_FADDR(val)	bfin_write16(USB_FADDR, val)
-#define bfin_read_USB_POWER()		bfin_read16(USB_POWER)
-#define bfin_write_USB_POWER(val)	bfin_write16(USB_POWER, val)
-#define bfin_read_USB_INTRTX()		bfin_read16(USB_INTRTX)
-#define bfin_write_USB_INTRTX(val)	bfin_write16(USB_INTRTX, val)
-#define bfin_read_USB_INTRRX()		bfin_read16(USB_INTRRX)
-#define bfin_write_USB_INTRRX(val)	bfin_write16(USB_INTRRX, val)
-#define bfin_read_USB_INTRTXE()		bfin_read16(USB_INTRTXE)
-#define bfin_write_USB_INTRTXE(val)	bfin_write16(USB_INTRTXE, val)
-#define bfin_read_USB_INTRRXE()		bfin_read16(USB_INTRRXE)
-#define bfin_write_USB_INTRRXE(val)	bfin_write16(USB_INTRRXE, val)
-#define bfin_read_USB_INTRUSB()		bfin_read16(USB_INTRUSB)
-#define bfin_write_USB_INTRUSB(val)	bfin_write16(USB_INTRUSB, val)
-#define bfin_read_USB_INTRUSBE()	bfin_read16(USB_INTRUSBE)
-#define bfin_write_USB_INTRUSBE(val)	bfin_write16(USB_INTRUSBE, val)
-#define bfin_read_USB_FRAME()		bfin_read16(USB_FRAME)
-#define bfin_write_USB_FRAME(val)	bfin_write16(USB_FRAME, val)
-#define bfin_read_USB_INDEX()		bfin_read16(USB_INDEX)
-#define bfin_write_USB_INDEX(val)	bfin_write16(USB_INDEX, val)
-#define bfin_read_USB_TESTMODE()	bfin_read16(USB_TESTMODE)
-#define bfin_write_USB_TESTMODE(val)	bfin_write16(USB_TESTMODE, val)
-#define bfin_read_USB_GLOBINTR()	bfin_read16(USB_GLOBINTR)
-#define bfin_write_USB_GLOBINTR(val)	bfin_write16(USB_GLOBINTR, val)
-#define bfin_read_USB_GLOBAL_CTL()	bfin_read16(USB_GLOBAL_CTL)
-#define bfin_write_USB_GLOBAL_CTL(val)		bfin_write16(USB_GLOBAL_CTL, val)
-
-/* USB Packet Control Registers */
-
-#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
-#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
-#define bfin_read_USB_CSR0()		bfin_read16(USB_CSR0)
-#define bfin_write_USB_CSR0(val)	bfin_write16(USB_CSR0, val)
-#define bfin_read_USB_TXCSR()		bfin_read16(USB_TXCSR)
-#define bfin_write_USB_TXCSR(val)	bfin_write16(USB_TXCSR, val)
-#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
-#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
-#define bfin_read_USB_RXCSR()		bfin_read16(USB_RXCSR)
-#define bfin_write_USB_RXCSR(val)	bfin_write16(USB_RXCSR, val)
-#define bfin_read_USB_COUNT0()		bfin_read16(USB_COUNT0)
-#define bfin_write_USB_COUNT0(val)	bfin_write16(USB_COUNT0, val)
-#define bfin_read_USB_RXCOUNT()		bfin_read16(USB_RXCOUNT)
-#define bfin_write_USB_RXCOUNT(val)	bfin_write16(USB_RXCOUNT, val)
-#define bfin_read_USB_TXTYPE()		bfin_read16(USB_TXTYPE)
-#define bfin_write_USB_TXTYPE(val)	bfin_write16(USB_TXTYPE, val)
-#define bfin_read_USB_NAKLIMIT0()	bfin_read16(USB_NAKLIMIT0)
-#define bfin_write_USB_NAKLIMIT0(val)	bfin_write16(USB_NAKLIMIT0, val)
-#define bfin_read_USB_TXINTERVAL()	bfin_read16(USB_TXINTERVAL)
-#define bfin_write_USB_TXINTERVAL(val)	bfin_write16(USB_TXINTERVAL, val)
-#define bfin_read_USB_RXTYPE()		bfin_read16(USB_RXTYPE)
-#define bfin_write_USB_RXTYPE(val)	bfin_write16(USB_RXTYPE, val)
-#define bfin_read_USB_RXINTERVAL()	bfin_read16(USB_RXINTERVAL)
-#define bfin_write_USB_RXINTERVAL(val)	bfin_write16(USB_RXINTERVAL, val)
-#define bfin_read_USB_TXCOUNT()		bfin_read16(USB_TXCOUNT)
-#define bfin_write_USB_TXCOUNT(val)	bfin_write16(USB_TXCOUNT, val)
-
-/* USB Endbfin_read_()oint FIFO Registers */
-
-#define bfin_read_USB_EP0_FIFO()	bfin_read16(USB_EP0_FIFO)
-#define bfin_write_USB_EP0_FIFO(val)	bfin_write16(USB_EP0_FIFO, val)
-#define bfin_read_USB_EP1_FIFO()	bfin_read16(USB_EP1_FIFO)
-#define bfin_write_USB_EP1_FIFO(val)	bfin_write16(USB_EP1_FIFO, val)
-#define bfin_read_USB_EP2_FIFO()	bfin_read16(USB_EP2_FIFO)
-#define bfin_write_USB_EP2_FIFO(val)	bfin_write16(USB_EP2_FIFO, val)
-#define bfin_read_USB_EP3_FIFO()	bfin_read16(USB_EP3_FIFO)
-#define bfin_write_USB_EP3_FIFO(val)	bfin_write16(USB_EP3_FIFO, val)
-#define bfin_read_USB_EP4_FIFO()	bfin_read16(USB_EP4_FIFO)
-#define bfin_write_USB_EP4_FIFO(val)	bfin_write16(USB_EP4_FIFO, val)
-#define bfin_read_USB_EP5_FIFO()	bfin_read16(USB_EP5_FIFO)
-#define bfin_write_USB_EP5_FIFO(val)	bfin_write16(USB_EP5_FIFO, val)
-#define bfin_read_USB_EP6_FIFO()	bfin_read16(USB_EP6_FIFO)
-#define bfin_write_USB_EP6_FIFO(val)	bfin_write16(USB_EP6_FIFO, val)
-#define bfin_read_USB_EP7_FIFO()	bfin_read16(USB_EP7_FIFO)
-#define bfin_write_USB_EP7_FIFO(val)	bfin_write16(USB_EP7_FIFO, val)
-
-/* USB OTG Control Registers */
-
-#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
-#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
-#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
-#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
-#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
-#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
-
-/* USB Phy Control Registers */
-
-#define bfin_read_USB_LINKINFO()	bfin_read16(USB_LINKINFO)
-#define bfin_write_USB_LINKINFO(val)	bfin_write16(USB_LINKINFO, val)
-#define bfin_read_USB_VPLEN()		bfin_read16(USB_VPLEN)
-#define bfin_write_USB_VPLEN(val)	bfin_write16(USB_VPLEN, val)
-#define bfin_read_USB_HS_EOF1()		bfin_read16(USB_HS_EOF1)
-#define bfin_write_USB_HS_EOF1(val)	bfin_write16(USB_HS_EOF1, val)
-#define bfin_read_USB_FS_EOF1()		bfin_read16(USB_FS_EOF1)
-#define bfin_write_USB_FS_EOF1(val)	bfin_write16(USB_FS_EOF1, val)
-#define bfin_read_USB_LS_EOF1()		bfin_read16(USB_LS_EOF1)
-#define bfin_write_USB_LS_EOF1(val)	bfin_write16(USB_LS_EOF1, val)
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
-#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
-#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
-#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
-#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
-#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
-#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
-#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
-#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
-#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
-
-/* USB Endbfin_read_()oint 0 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
-#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
-#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
-#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
-#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
-#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
-#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
-#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
-#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
-#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
-#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
-#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
-#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
-#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
-#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
-#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
-#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 1 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
-#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
-#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
-#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
-#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
-#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
-#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
-#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
-#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
-#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
-#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
-#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
-#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
-#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
-#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
-#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
-#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 2 Control Registers */
-
-#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
-#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
-#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
-#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
-#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
-#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
-#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
-#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
-#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
-#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
-#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
-#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
-#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
-#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
-#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
-#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
-#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 3 Control Registers */
-
-#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
-#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
-#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
-#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
-#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
-#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
-#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
-#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
-#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
-#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
-#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
-#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
-#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
-#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
-#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
-#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
-#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 4 Control Registers */
-
-#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
-#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
-#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
-#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
-#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
-#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
-#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
-#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
-#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
-#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
-#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
-#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
-#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
-#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
-#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
-#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
-#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 5 Control Registers */
-
-#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
-#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
-#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
-#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
-#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
-#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
-#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
-#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
-#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
-#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
-#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
-#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
-#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
-#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
-#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
-#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
-#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 6 Control Registers */
-
-#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
-#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
-#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
-#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
-#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
-#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
-#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
-#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
-#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
-#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
-#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
-#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
-#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
-#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
-#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
-#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
-#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 7 Control Registers */
-
-#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
-#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
-#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
-#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
-#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
-#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
-#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
-#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
-#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
-#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
-#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
-#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
-#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
-#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
-#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
-#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
-#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
-#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
-#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
-#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
-
-/* USB Channel 0 Config Registers */
-
-#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
-#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
-#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
-#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
-#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
-#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
-#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
-#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
-#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
-#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
-
-/* USB Channel 1 Config Registers */
-
-#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
-#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
-#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
-#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
-#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
-#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
-#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
-#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
-#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
-#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
-
-/* USB Channel 2 Config Registers */
-
-#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
-#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
-#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
-#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
-#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
-#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
-#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
-#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
-#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
-#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
-
-/* USB Channel 3 Config Registers */
-
-#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
-#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
-#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
-#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
-#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
-#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
-#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
-#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
-#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
-#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
-
-/* USB Channel 4 Config Registers */
-
-#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
-#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
-#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
-#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
-#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
-#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
-#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
-#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
-#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
-#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
-
-/* USB Channel 5 Config Registers */
-
-#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
-#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
-#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
-#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
-#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
-#define bfin_write_USB_DMA5ADDRHIGH(val)	bfin_write16(USB_DMA5ADDRHIGH, val)
-#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
-#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
-#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
-#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
-
-/* USB Channel 6 Config Registers */
-
-#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
-#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
-#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
-#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
-#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
-#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
-#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
-#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
-#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
-#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
-
-/* USB Channel 7 Config Registers */
-
-#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
-#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
-#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
-#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
-#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
-#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
-#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
-#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
-#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
-#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
-
-/* Keybfin_read_()ad Registers */
-
-#define bfin_read_KPAD_CTL()		bfin_read16(KPAD_CTL)
-#define bfin_write_KPAD_CTL(val)	bfin_write16(KPAD_CTL, val)
-#define bfin_read_KPAD_PRESCALE()	bfin_read16(KPAD_PRESCALE)
-#define bfin_write_KPAD_PRESCALE(val)	bfin_write16(KPAD_PRESCALE, val)
-#define bfin_read_KPAD_MSEL()		bfin_read16(KPAD_MSEL)
-#define bfin_write_KPAD_MSEL(val)	bfin_write16(KPAD_MSEL, val)
-#define bfin_read_KPAD_ROWCOL()		bfin_read16(KPAD_ROWCOL)
-#define bfin_write_KPAD_ROWCOL(val)	bfin_write16(KPAD_ROWCOL, val)
-#define bfin_read_KPAD_STAT()		bfin_read16(KPAD_STAT)
-#define bfin_write_KPAD_STAT(val)	bfin_write16(KPAD_STAT, val)
-#define bfin_read_KPAD_SOFTEVAL()	bfin_read16(KPAD_SOFTEVAL)
-#define bfin_write_KPAD_SOFTEVAL(val)	bfin_write16(KPAD_SOFTEVAL, val)
-
-/* Pixel Combfin_read_()ositor (PIXC) Registers */
-
-#define bfin_read_PIXC_CTL()		bfin_read16(PIXC_CTL)
-#define bfin_write_PIXC_CTL(val)	bfin_write16(PIXC_CTL, val)
-#define bfin_read_PIXC_PPL()		bfin_read16(PIXC_PPL)
-#define bfin_write_PIXC_PPL(val)	bfin_write16(PIXC_PPL, val)
-#define bfin_read_PIXC_LPF()		bfin_read16(PIXC_LPF)
-#define bfin_write_PIXC_LPF(val)	bfin_write16(PIXC_LPF, val)
-#define bfin_read_PIXC_AHSTART()	bfin_read16(PIXC_AHSTART)
-#define bfin_write_PIXC_AHSTART(val)	bfin_write16(PIXC_AHSTART, val)
-#define bfin_read_PIXC_AHEND()		bfin_read16(PIXC_AHEND)
-#define bfin_write_PIXC_AHEND(val)	bfin_write16(PIXC_AHEND, val)
-#define bfin_read_PIXC_AVSTART()	bfin_read16(PIXC_AVSTART)
-#define bfin_write_PIXC_AVSTART(val)	bfin_write16(PIXC_AVSTART, val)
-#define bfin_read_PIXC_AVEND()		bfin_read16(PIXC_AVEND)
-#define bfin_write_PIXC_AVEND(val)	bfin_write16(PIXC_AVEND, val)
-#define bfin_read_PIXC_ATRANSP()	bfin_read16(PIXC_ATRANSP)
-#define bfin_write_PIXC_ATRANSP(val)	bfin_write16(PIXC_ATRANSP, val)
-#define bfin_read_PIXC_BHSTART()	bfin_read16(PIXC_BHSTART)
-#define bfin_write_PIXC_BHSTART(val)	bfin_write16(PIXC_BHSTART, val)
-#define bfin_read_PIXC_BHEND()		bfin_read16(PIXC_BHEND)
-#define bfin_write_PIXC_BHEND(val)	bfin_write16(PIXC_BHEND, val)
-#define bfin_read_PIXC_BVSTART()	bfin_read16(PIXC_BVSTART)
-#define bfin_write_PIXC_BVSTART(val)	bfin_write16(PIXC_BVSTART, val)
-#define bfin_read_PIXC_BVEND()		bfin_read16(PIXC_BVEND)
-#define bfin_write_PIXC_BVEND(val)	bfin_write16(PIXC_BVEND, val)
-#define bfin_read_PIXC_BTRANSP()	bfin_read16(PIXC_BTRANSP)
-#define bfin_write_PIXC_BTRANSP(val)	bfin_write16(PIXC_BTRANSP, val)
-#define bfin_read_PIXC_INTRSTAT()	bfin_read16(PIXC_INTRSTAT)
-#define bfin_write_PIXC_INTRSTAT(val)	bfin_write16(PIXC_INTRSTAT, val)
-#define bfin_read_PIXC_RYCON()		bfin_read32(PIXC_RYCON)
-#define bfin_write_PIXC_RYCON(val)	bfin_write32(PIXC_RYCON, val)
-#define bfin_read_PIXC_GUCON()		bfin_read32(PIXC_GUCON)
-#define bfin_write_PIXC_GUCON(val)	bfin_write32(PIXC_GUCON, val)
-#define bfin_read_PIXC_BVCON()		bfin_read32(PIXC_BVCON)
-#define bfin_write_PIXC_BVCON(val)	bfin_write32(PIXC_BVCON, val)
-#define bfin_read_PIXC_CCBIAS()		bfin_read32(PIXC_CCBIAS)
-#define bfin_write_PIXC_CCBIAS(val)	bfin_write32(PIXC_CCBIAS, val)
-#define bfin_read_PIXC_TC()		bfin_read32(PIXC_TC)
-#define bfin_write_PIXC_TC(val)		bfin_write32(PIXC_TC, val)
-
-/* Handshake MDMA 0 Registers */
-
-#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
-#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
-#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
-#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
-#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
-#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
-#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
-#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
-#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
-#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
-#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
-#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
-#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
-#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
-
-/* Handshake MDMA 1 Registers */
-
-#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
-#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
-#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
-#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
-#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
-#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
-#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
-#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
-#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
-#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
-#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
-#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
-#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
-#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
-
 #endif /* _CDEF_BF548_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
index 34c84c7..80201ed 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
@@ -18,165 +18,8 @@
 /* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
 #include "cdefBF54x_base.h"
 
-/* The following are the #defines needed by ADSP-BF549 that are not in the common header */
-
-/* Timer Registers */
-
-#define bfin_read_TIMER8_CONFIG()		bfin_read16(TIMER8_CONFIG)
-#define bfin_write_TIMER8_CONFIG(val)		bfin_write16(TIMER8_CONFIG, val)
-#define bfin_read_TIMER8_COUNTER()		bfin_read32(TIMER8_COUNTER)
-#define bfin_write_TIMER8_COUNTER(val)		bfin_write32(TIMER8_COUNTER, val)
-#define bfin_read_TIMER8_PERIOD()		bfin_read32(TIMER8_PERIOD)
-#define bfin_write_TIMER8_PERIOD(val)		bfin_write32(TIMER8_PERIOD, val)
-#define bfin_read_TIMER8_WIDTH()		bfin_read32(TIMER8_WIDTH)
-#define bfin_write_TIMER8_WIDTH(val)		bfin_write32(TIMER8_WIDTH, val)
-#define bfin_read_TIMER9_CONFIG()		bfin_read16(TIMER9_CONFIG)
-#define bfin_write_TIMER9_CONFIG(val)		bfin_write16(TIMER9_CONFIG, val)
-#define bfin_read_TIMER9_COUNTER()		bfin_read32(TIMER9_COUNTER)
-#define bfin_write_TIMER9_COUNTER(val)		bfin_write32(TIMER9_COUNTER, val)
-#define bfin_read_TIMER9_PERIOD()		bfin_read32(TIMER9_PERIOD)
-#define bfin_write_TIMER9_PERIOD(val)		bfin_write32(TIMER9_PERIOD, val)
-#define bfin_read_TIMER9_WIDTH()		bfin_read32(TIMER9_WIDTH)
-#define bfin_write_TIMER9_WIDTH(val)		bfin_write32(TIMER9_WIDTH, val)
-#define bfin_read_TIMER10_CONFIG()		bfin_read16(TIMER10_CONFIG)
-#define bfin_write_TIMER10_CONFIG(val)		bfin_write16(TIMER10_CONFIG, val)
-#define bfin_read_TIMER10_COUNTER()		bfin_read32(TIMER10_COUNTER)
-#define bfin_write_TIMER10_COUNTER(val)		bfin_write32(TIMER10_COUNTER, val)
-#define bfin_read_TIMER10_PERIOD()		bfin_read32(TIMER10_PERIOD)
-#define bfin_write_TIMER10_PERIOD(val)		bfin_write32(TIMER10_PERIOD, val)
-#define bfin_read_TIMER10_WIDTH()		bfin_read32(TIMER10_WIDTH)
-#define bfin_write_TIMER10_WIDTH(val)		bfin_write32(TIMER10_WIDTH, val)
-
-/* Timer Groubfin_read_() of 3 */
-
-#define bfin_read_TIMER_ENABLE1()		bfin_read16(TIMER_ENABLE1)
-#define bfin_write_TIMER_ENABLE1(val)		bfin_write16(TIMER_ENABLE1, val)
-#define bfin_read_TIMER_DISABLE1()		bfin_read16(TIMER_DISABLE1)
-#define bfin_write_TIMER_DISABLE1(val)		bfin_write16(TIMER_DISABLE1, val)
-#define bfin_read_TIMER_STATUS1()		bfin_read32(TIMER_STATUS1)
-#define bfin_write_TIMER_STATUS1(val)		bfin_write32(TIMER_STATUS1, val)
-
-/* SPORT0 Registers */
-
-#define bfin_read_SPORT0_TCR1()			bfin_read16(SPORT0_TCR1)
-#define bfin_write_SPORT0_TCR1(val)		bfin_write16(SPORT0_TCR1, val)
-#define bfin_read_SPORT0_TCR2()			bfin_read16(SPORT0_TCR2)
-#define bfin_write_SPORT0_TCR2(val)		bfin_write16(SPORT0_TCR2, val)
-#define bfin_read_SPORT0_TCLKDIV()		bfin_read16(SPORT0_TCLKDIV)
-#define bfin_write_SPORT0_TCLKDIV(val)		bfin_write16(SPORT0_TCLKDIV, val)
-#define bfin_read_SPORT0_TFSDIV()		bfin_read16(SPORT0_TFSDIV)
-#define bfin_write_SPORT0_TFSDIV(val)		bfin_write16(SPORT0_TFSDIV, val)
-#define bfin_read_SPORT0_TX()			bfin_read32(SPORT0_TX)
-#define bfin_write_SPORT0_TX(val)		bfin_write32(SPORT0_TX, val)
-#define bfin_read_SPORT0_RX()			bfin_read32(SPORT0_RX)
-#define bfin_write_SPORT0_RX(val)		bfin_write32(SPORT0_RX, val)
-#define bfin_read_SPORT0_RCR1()			bfin_read16(SPORT0_RCR1)
-#define bfin_write_SPORT0_RCR1(val)		bfin_write16(SPORT0_RCR1, val)
-#define bfin_read_SPORT0_RCR2()			bfin_read16(SPORT0_RCR2)
-#define bfin_write_SPORT0_RCR2(val)		bfin_write16(SPORT0_RCR2, val)
-#define bfin_read_SPORT0_RCLKDIV()		bfin_read16(SPORT0_RCLKDIV)
-#define bfin_write_SPORT0_RCLKDIV(val)		bfin_write16(SPORT0_RCLKDIV, val)
-#define bfin_read_SPORT0_RFSDIV()		bfin_read16(SPORT0_RFSDIV)
-#define bfin_write_SPORT0_RFSDIV(val)		bfin_write16(SPORT0_RFSDIV, val)
-#define bfin_read_SPORT0_STAT()			bfin_read16(SPORT0_STAT)
-#define bfin_write_SPORT0_STAT(val)		bfin_write16(SPORT0_STAT, val)
-#define bfin_read_SPORT0_CHNL()			bfin_read16(SPORT0_CHNL)
-#define bfin_write_SPORT0_CHNL(val)		bfin_write16(SPORT0_CHNL, val)
-#define bfin_read_SPORT0_MCMC1()		bfin_read16(SPORT0_MCMC1)
-#define bfin_write_SPORT0_MCMC1(val)		bfin_write16(SPORT0_MCMC1, val)
-#define bfin_read_SPORT0_MCMC2()		bfin_read16(SPORT0_MCMC2)
-#define bfin_write_SPORT0_MCMC2(val)		bfin_write16(SPORT0_MCMC2, val)
-#define bfin_read_SPORT0_MTCS0()		bfin_read32(SPORT0_MTCS0)
-#define bfin_write_SPORT0_MTCS0(val)		bfin_write32(SPORT0_MTCS0, val)
-#define bfin_read_SPORT0_MTCS1()		bfin_read32(SPORT0_MTCS1)
-#define bfin_write_SPORT0_MTCS1(val)		bfin_write32(SPORT0_MTCS1, val)
-#define bfin_read_SPORT0_MTCS2()		bfin_read32(SPORT0_MTCS2)
-#define bfin_write_SPORT0_MTCS2(val)		bfin_write32(SPORT0_MTCS2, val)
-#define bfin_read_SPORT0_MTCS3()		bfin_read32(SPORT0_MTCS3)
-#define bfin_write_SPORT0_MTCS3(val)		bfin_write32(SPORT0_MTCS3, val)
-#define bfin_read_SPORT0_MRCS0()		bfin_read32(SPORT0_MRCS0)
-#define bfin_write_SPORT0_MRCS0(val)		bfin_write32(SPORT0_MRCS0, val)
-#define bfin_read_SPORT0_MRCS1()		bfin_read32(SPORT0_MRCS1)
-#define bfin_write_SPORT0_MRCS1(val)		bfin_write32(SPORT0_MRCS1, val)
-#define bfin_read_SPORT0_MRCS2()		bfin_read32(SPORT0_MRCS2)
-#define bfin_write_SPORT0_MRCS2(val)		bfin_write32(SPORT0_MRCS2, val)
-#define bfin_read_SPORT0_MRCS3()		bfin_read32(SPORT0_MRCS3)
-#define bfin_write_SPORT0_MRCS3(val)		bfin_write32(SPORT0_MRCS3, val)
-
-/* EPPI0 Registers */
-
-#define bfin_read_EPPI0_STATUS()		bfin_read16(EPPI0_STATUS)
-#define bfin_write_EPPI0_STATUS(val)		bfin_write16(EPPI0_STATUS, val)
-#define bfin_read_EPPI0_HCOUNT()		bfin_read16(EPPI0_HCOUNT)
-#define bfin_write_EPPI0_HCOUNT(val)		bfin_write16(EPPI0_HCOUNT, val)
-#define bfin_read_EPPI0_HDELAY()		bfin_read16(EPPI0_HDELAY)
-#define bfin_write_EPPI0_HDELAY(val)		bfin_write16(EPPI0_HDELAY, val)
-#define bfin_read_EPPI0_VCOUNT()		bfin_read16(EPPI0_VCOUNT)
-#define bfin_write_EPPI0_VCOUNT(val)		bfin_write16(EPPI0_VCOUNT, val)
-#define bfin_read_EPPI0_VDELAY()		bfin_read16(EPPI0_VDELAY)
-#define bfin_write_EPPI0_VDELAY(val)		bfin_write16(EPPI0_VDELAY, val)
-#define bfin_read_EPPI0_FRAME()			bfin_read16(EPPI0_FRAME)
-#define bfin_write_EPPI0_FRAME(val)		bfin_write16(EPPI0_FRAME, val)
-#define bfin_read_EPPI0_LINE()			bfin_read16(EPPI0_LINE)
-#define bfin_write_EPPI0_LINE(val)		bfin_write16(EPPI0_LINE, val)
-#define bfin_read_EPPI0_CLKDIV()		bfin_read16(EPPI0_CLKDIV)
-#define bfin_write_EPPI0_CLKDIV(val)		bfin_write16(EPPI0_CLKDIV, val)
-#define bfin_read_EPPI0_CONTROL()		bfin_read32(EPPI0_CONTROL)
-#define bfin_write_EPPI0_CONTROL(val)		bfin_write32(EPPI0_CONTROL, val)
-#define bfin_read_EPPI0_FS1W_HBL()		bfin_read32(EPPI0_FS1W_HBL)
-#define bfin_write_EPPI0_FS1W_HBL(val)		bfin_write32(EPPI0_FS1W_HBL, val)
-#define bfin_read_EPPI0_FS1P_AVPL()		bfin_read32(EPPI0_FS1P_AVPL)
-#define bfin_write_EPPI0_FS1P_AVPL(val)		bfin_write32(EPPI0_FS1P_AVPL, val)
-#define bfin_read_EPPI0_FS2W_LVB()		bfin_read32(EPPI0_FS2W_LVB)
-#define bfin_write_EPPI0_FS2W_LVB(val)		bfin_write32(EPPI0_FS2W_LVB, val)
-#define bfin_read_EPPI0_FS2P_LAVF()		bfin_read32(EPPI0_FS2P_LAVF)
-#define bfin_write_EPPI0_FS2P_LAVF(val)		bfin_write32(EPPI0_FS2P_LAVF, val)
-#define bfin_read_EPPI0_CLIP()			bfin_read32(EPPI0_CLIP)
-#define bfin_write_EPPI0_CLIP(val)		bfin_write32(EPPI0_CLIP, val)
-
-/* UART2 Registers */
-
-#define bfin_read_UART2_DLL()			bfin_read16(UART2_DLL)
-#define bfin_write_UART2_DLL(val)		bfin_write16(UART2_DLL, val)
-#define bfin_read_UART2_DLH()			bfin_read16(UART2_DLH)
-#define bfin_write_UART2_DLH(val)		bfin_write16(UART2_DLH, val)
-#define bfin_read_UART2_GCTL()			bfin_read16(UART2_GCTL)
-#define bfin_write_UART2_GCTL(val)		bfin_write16(UART2_GCTL, val)
-#define bfin_read_UART2_LCR()			bfin_read16(UART2_LCR)
-#define bfin_write_UART2_LCR(val)		bfin_write16(UART2_LCR, val)
-#define bfin_read_UART2_MCR()			bfin_read16(UART2_MCR)
-#define bfin_write_UART2_MCR(val)		bfin_write16(UART2_MCR, val)
-#define bfin_read_UART2_LSR()			bfin_read16(UART2_LSR)
-#define bfin_write_UART2_LSR(val)		bfin_write16(UART2_LSR, val)
-#define bfin_read_UART2_MSR()			bfin_read16(UART2_MSR)
-#define bfin_write_UART2_MSR(val)		bfin_write16(UART2_MSR, val)
-#define bfin_read_UART2_SCR()			bfin_read16(UART2_SCR)
-#define bfin_write_UART2_SCR(val)		bfin_write16(UART2_SCR, val)
-#define bfin_read_UART2_IER_SET()		bfin_read16(UART2_IER_SET)
-#define bfin_write_UART2_IER_SET(val)		bfin_write16(UART2_IER_SET, val)
-#define bfin_read_UART2_IER_CLEAR()		bfin_read16(UART2_IER_CLEAR)
-#define bfin_write_UART2_IER_CLEAR(val)		bfin_write16(UART2_IER_CLEAR, val)
-#define bfin_read_UART2_RBR()			bfin_read16(UART2_RBR)
-#define bfin_write_UART2_RBR(val)		bfin_write16(UART2_RBR, val)
-
-/* Two Wire Interface Registers (TWI1) */
-
-/* SPI2 Registers */
-
-#define bfin_read_SPI2_CTL()		bfin_read16(SPI2_CTL)
-#define bfin_write_SPI2_CTL(val)	bfin_write16(SPI2_CTL, val)
-#define bfin_read_SPI2_FLG()		bfin_read16(SPI2_FLG)
-#define bfin_write_SPI2_FLG(val)	bfin_write16(SPI2_FLG, val)
-#define bfin_read_SPI2_STAT()		bfin_read16(SPI2_STAT)
-#define bfin_write_SPI2_STAT(val)	bfin_write16(SPI2_STAT, val)
-#define bfin_read_SPI2_TDBR()		bfin_read16(SPI2_TDBR)
-#define bfin_write_SPI2_TDBR(val)	bfin_write16(SPI2_TDBR, val)
-#define bfin_read_SPI2_RDBR()		bfin_read16(SPI2_RDBR)
-#define bfin_write_SPI2_RDBR(val)	bfin_write16(SPI2_RDBR, val)
-#define bfin_read_SPI2_BAUD()		bfin_read16(SPI2_BAUD)
-#define bfin_write_SPI2_BAUD(val)	bfin_write16(SPI2_BAUD, val)
-#define bfin_read_SPI2_SHADOW()		bfin_read16(SPI2_SHADOW)
-#define bfin_write_SPI2_SHADOW(val)	bfin_write16(SPI2_SHADOW, val)
+/* The BF549 is like the BF544, but has MXVR */
+#include "cdefBF547.h"
 
 /* MXVR Registers */
 
@@ -464,1376 +307,4 @@
 #define bfin_read_MXVR_SCLK_CNT()		bfin_read16(MXVR_SCLK_CNT)
 #define bfin_write_MXVR_SCLK_CNT(val)		bfin_write16(MXVR_SCLK_CNT, val)
 
-/* CAN Controller 1 Config 1 Registers */
-
-#define bfin_read_CAN1_MC1()		bfin_read16(CAN1_MC1)
-#define bfin_write_CAN1_MC1(val)	bfin_write16(CAN1_MC1, val)
-#define bfin_read_CAN1_MD1()		bfin_read16(CAN1_MD1)
-#define bfin_write_CAN1_MD1(val)	bfin_write16(CAN1_MD1, val)
-#define bfin_read_CAN1_TRS1()		bfin_read16(CAN1_TRS1)
-#define bfin_write_CAN1_TRS1(val)	bfin_write16(CAN1_TRS1, val)
-#define bfin_read_CAN1_TRR1()		bfin_read16(CAN1_TRR1)
-#define bfin_write_CAN1_TRR1(val)	bfin_write16(CAN1_TRR1, val)
-#define bfin_read_CAN1_TA1()		bfin_read16(CAN1_TA1)
-#define bfin_write_CAN1_TA1(val)	bfin_write16(CAN1_TA1, val)
-#define bfin_read_CAN1_AA1()		bfin_read16(CAN1_AA1)
-#define bfin_write_CAN1_AA1(val)	bfin_write16(CAN1_AA1, val)
-#define bfin_read_CAN1_RMP1()		bfin_read16(CAN1_RMP1)
-#define bfin_write_CAN1_RMP1(val)	bfin_write16(CAN1_RMP1, val)
-#define bfin_read_CAN1_RML1()		bfin_read16(CAN1_RML1)
-#define bfin_write_CAN1_RML1(val)	bfin_write16(CAN1_RML1, val)
-#define bfin_read_CAN1_MBTIF1()		bfin_read16(CAN1_MBTIF1)
-#define bfin_write_CAN1_MBTIF1(val)	bfin_write16(CAN1_MBTIF1, val)
-#define bfin_read_CAN1_MBRIF1()		bfin_read16(CAN1_MBRIF1)
-#define bfin_write_CAN1_MBRIF1(val)	bfin_write16(CAN1_MBRIF1, val)
-#define bfin_read_CAN1_MBIM1()		bfin_read16(CAN1_MBIM1)
-#define bfin_write_CAN1_MBIM1(val)	bfin_write16(CAN1_MBIM1, val)
-#define bfin_read_CAN1_RFH1()		bfin_read16(CAN1_RFH1)
-#define bfin_write_CAN1_RFH1(val)	bfin_write16(CAN1_RFH1, val)
-#define bfin_read_CAN1_OPSS1()		bfin_read16(CAN1_OPSS1)
-#define bfin_write_CAN1_OPSS1(val)	bfin_write16(CAN1_OPSS1, val)
-
-/* CAN Controller 1 Config 2 Registers */
-
-#define bfin_read_CAN1_MC2()		bfin_read16(CAN1_MC2)
-#define bfin_write_CAN1_MC2(val)	bfin_write16(CAN1_MC2, val)
-#define bfin_read_CAN1_MD2()		bfin_read16(CAN1_MD2)
-#define bfin_write_CAN1_MD2(val)	bfin_write16(CAN1_MD2, val)
-#define bfin_read_CAN1_TRS2()		bfin_read16(CAN1_TRS2)
-#define bfin_write_CAN1_TRS2(val)	bfin_write16(CAN1_TRS2, val)
-#define bfin_read_CAN1_TRR2()		bfin_read16(CAN1_TRR2)
-#define bfin_write_CAN1_TRR2(val)	bfin_write16(CAN1_TRR2, val)
-#define bfin_read_CAN1_TA2()		bfin_read16(CAN1_TA2)
-#define bfin_write_CAN1_TA2(val)	bfin_write16(CAN1_TA2, val)
-#define bfin_read_CAN1_AA2()		bfin_read16(CAN1_AA2)
-#define bfin_write_CAN1_AA2(val)	bfin_write16(CAN1_AA2, val)
-#define bfin_read_CAN1_RMP2()		bfin_read16(CAN1_RMP2)
-#define bfin_write_CAN1_RMP2(val)	bfin_write16(CAN1_RMP2, val)
-#define bfin_read_CAN1_RML2()		bfin_read16(CAN1_RML2)
-#define bfin_write_CAN1_RML2(val)	bfin_write16(CAN1_RML2, val)
-#define bfin_read_CAN1_MBTIF2()		bfin_read16(CAN1_MBTIF2)
-#define bfin_write_CAN1_MBTIF2(val)	bfin_write16(CAN1_MBTIF2, val)
-#define bfin_read_CAN1_MBRIF2()		bfin_read16(CAN1_MBRIF2)
-#define bfin_write_CAN1_MBRIF2(val)	bfin_write16(CAN1_MBRIF2, val)
-#define bfin_read_CAN1_MBIM2()		bfin_read16(CAN1_MBIM2)
-#define bfin_write_CAN1_MBIM2(val)	bfin_write16(CAN1_MBIM2, val)
-#define bfin_read_CAN1_RFH2()		bfin_read16(CAN1_RFH2)
-#define bfin_write_CAN1_RFH2(val)	bfin_write16(CAN1_RFH2, val)
-#define bfin_read_CAN1_OPSS2()		bfin_read16(CAN1_OPSS2)
-#define bfin_write_CAN1_OPSS2(val)	bfin_write16(CAN1_OPSS2, val)
-
-/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */
-
-#define bfin_read_CAN1_CLOCK()		bfin_read16(CAN1_CLOCK)
-#define bfin_write_CAN1_CLOCK(val)	bfin_write16(CAN1_CLOCK, val)
-#define bfin_read_CAN1_TIMING()		bfin_read16(CAN1_TIMING)
-#define bfin_write_CAN1_TIMING(val)	bfin_write16(CAN1_TIMING, val)
-#define bfin_read_CAN1_DEBUG()		bfin_read16(CAN1_DEBUG)
-#define bfin_write_CAN1_DEBUG(val)	bfin_write16(CAN1_DEBUG, val)
-#define bfin_read_CAN1_STATUS()		bfin_read16(CAN1_STATUS)
-#define bfin_write_CAN1_STATUS(val)	bfin_write16(CAN1_STATUS, val)
-#define bfin_read_CAN1_CEC()		bfin_read16(CAN1_CEC)
-#define bfin_write_CAN1_CEC(val)	bfin_write16(CAN1_CEC, val)
-#define bfin_read_CAN1_GIS()		bfin_read16(CAN1_GIS)
-#define bfin_write_CAN1_GIS(val)	bfin_write16(CAN1_GIS, val)
-#define bfin_read_CAN1_GIM()		bfin_read16(CAN1_GIM)
-#define bfin_write_CAN1_GIM(val)	bfin_write16(CAN1_GIM, val)
-#define bfin_read_CAN1_GIF()		bfin_read16(CAN1_GIF)
-#define bfin_write_CAN1_GIF(val)	bfin_write16(CAN1_GIF, val)
-#define bfin_read_CAN1_CONTROL()	bfin_read16(CAN1_CONTROL)
-#define bfin_write_CAN1_CONTROL(val)	bfin_write16(CAN1_CONTROL, val)
-#define bfin_read_CAN1_INTR()		bfin_read16(CAN1_INTR)
-#define bfin_write_CAN1_INTR(val)	bfin_write16(CAN1_INTR, val)
-#define bfin_read_CAN1_MBTD()		bfin_read16(CAN1_MBTD)
-#define bfin_write_CAN1_MBTD(val)	bfin_write16(CAN1_MBTD, val)
-#define bfin_read_CAN1_EWR()		bfin_read16(CAN1_EWR)
-#define bfin_write_CAN1_EWR(val)	bfin_write16(CAN1_EWR, val)
-#define bfin_read_CAN1_ESR()		bfin_read16(CAN1_ESR)
-#define bfin_write_CAN1_ESR(val)	bfin_write16(CAN1_ESR, val)
-#define bfin_read_CAN1_UCCNT()		bfin_read16(CAN1_UCCNT)
-#define bfin_write_CAN1_UCCNT(val)	bfin_write16(CAN1_UCCNT, val)
-#define bfin_read_CAN1_UCRC()		bfin_read16(CAN1_UCRC)
-#define bfin_write_CAN1_UCRC(val)	bfin_write16(CAN1_UCRC, val)
-#define bfin_read_CAN1_UCCNF()		bfin_read16(CAN1_UCCNF)
-#define bfin_write_CAN1_UCCNF(val)	bfin_write16(CAN1_UCCNF, val)
-
-/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
-
-#define bfin_read_CAN1_AM00L()		bfin_read16(CAN1_AM00L)
-#define bfin_write_CAN1_AM00L(val)	bfin_write16(CAN1_AM00L, val)
-#define bfin_read_CAN1_AM00H()		bfin_read16(CAN1_AM00H)
-#define bfin_write_CAN1_AM00H(val)	bfin_write16(CAN1_AM00H, val)
-#define bfin_read_CAN1_AM01L()		bfin_read16(CAN1_AM01L)
-#define bfin_write_CAN1_AM01L(val)	bfin_write16(CAN1_AM01L, val)
-#define bfin_read_CAN1_AM01H()		bfin_read16(CAN1_AM01H)
-#define bfin_write_CAN1_AM01H(val)	bfin_write16(CAN1_AM01H, val)
-#define bfin_read_CAN1_AM02L()		bfin_read16(CAN1_AM02L)
-#define bfin_write_CAN1_AM02L(val)	bfin_write16(CAN1_AM02L, val)
-#define bfin_read_CAN1_AM02H()		bfin_read16(CAN1_AM02H)
-#define bfin_write_CAN1_AM02H(val)	bfin_write16(CAN1_AM02H, val)
-#define bfin_read_CAN1_AM03L()		bfin_read16(CAN1_AM03L)
-#define bfin_write_CAN1_AM03L(val)	bfin_write16(CAN1_AM03L, val)
-#define bfin_read_CAN1_AM03H()		bfin_read16(CAN1_AM03H)
-#define bfin_write_CAN1_AM03H(val)	bfin_write16(CAN1_AM03H, val)
-#define bfin_read_CAN1_AM04L()		bfin_read16(CAN1_AM04L)
-#define bfin_write_CAN1_AM04L(val)	bfin_write16(CAN1_AM04L, val)
-#define bfin_read_CAN1_AM04H()		bfin_read16(CAN1_AM04H)
-#define bfin_write_CAN1_AM04H(val)	bfin_write16(CAN1_AM04H, val)
-#define bfin_read_CAN1_AM05L()		bfin_read16(CAN1_AM05L)
-#define bfin_write_CAN1_AM05L(val)	bfin_write16(CAN1_AM05L, val)
-#define bfin_read_CAN1_AM05H()		bfin_read16(CAN1_AM05H)
-#define bfin_write_CAN1_AM05H(val)	bfin_write16(CAN1_AM05H, val)
-#define bfin_read_CAN1_AM06L()		bfin_read16(CAN1_AM06L)
-#define bfin_write_CAN1_AM06L(val)	bfin_write16(CAN1_AM06L, val)
-#define bfin_read_CAN1_AM06H()		bfin_read16(CAN1_AM06H)
-#define bfin_write_CAN1_AM06H(val)	bfin_write16(CAN1_AM06H, val)
-#define bfin_read_CAN1_AM07L()		bfin_read16(CAN1_AM07L)
-#define bfin_write_CAN1_AM07L(val)	bfin_write16(CAN1_AM07L, val)
-#define bfin_read_CAN1_AM07H()		bfin_read16(CAN1_AM07H)
-#define bfin_write_CAN1_AM07H(val)	bfin_write16(CAN1_AM07H, val)
-#define bfin_read_CAN1_AM08L()		bfin_read16(CAN1_AM08L)
-#define bfin_write_CAN1_AM08L(val)	bfin_write16(CAN1_AM08L, val)
-#define bfin_read_CAN1_AM08H()		bfin_read16(CAN1_AM08H)
-#define bfin_write_CAN1_AM08H(val)	bfin_write16(CAN1_AM08H, val)
-#define bfin_read_CAN1_AM09L()		bfin_read16(CAN1_AM09L)
-#define bfin_write_CAN1_AM09L(val)	bfin_write16(CAN1_AM09L, val)
-#define bfin_read_CAN1_AM09H()		bfin_read16(CAN1_AM09H)
-#define bfin_write_CAN1_AM09H(val)	bfin_write16(CAN1_AM09H, val)
-#define bfin_read_CAN1_AM10L()		bfin_read16(CAN1_AM10L)
-#define bfin_write_CAN1_AM10L(val)	bfin_write16(CAN1_AM10L, val)
-#define bfin_read_CAN1_AM10H()		bfin_read16(CAN1_AM10H)
-#define bfin_write_CAN1_AM10H(val)	bfin_write16(CAN1_AM10H, val)
-#define bfin_read_CAN1_AM11L()		bfin_read16(CAN1_AM11L)
-#define bfin_write_CAN1_AM11L(val)	bfin_write16(CAN1_AM11L, val)
-#define bfin_read_CAN1_AM11H()		bfin_read16(CAN1_AM11H)
-#define bfin_write_CAN1_AM11H(val)	bfin_write16(CAN1_AM11H, val)
-#define bfin_read_CAN1_AM12L()		bfin_read16(CAN1_AM12L)
-#define bfin_write_CAN1_AM12L(val)	bfin_write16(CAN1_AM12L, val)
-#define bfin_read_CAN1_AM12H()		bfin_read16(CAN1_AM12H)
-#define bfin_write_CAN1_AM12H(val)	bfin_write16(CAN1_AM12H, val)
-#define bfin_read_CAN1_AM13L()		bfin_read16(CAN1_AM13L)
-#define bfin_write_CAN1_AM13L(val)	bfin_write16(CAN1_AM13L, val)
-#define bfin_read_CAN1_AM13H()		bfin_read16(CAN1_AM13H)
-#define bfin_write_CAN1_AM13H(val)	bfin_write16(CAN1_AM13H, val)
-#define bfin_read_CAN1_AM14L()		bfin_read16(CAN1_AM14L)
-#define bfin_write_CAN1_AM14L(val)	bfin_write16(CAN1_AM14L, val)
-#define bfin_read_CAN1_AM14H()		bfin_read16(CAN1_AM14H)
-#define bfin_write_CAN1_AM14H(val)	bfin_write16(CAN1_AM14H, val)
-#define bfin_read_CAN1_AM15L()		bfin_read16(CAN1_AM15L)
-#define bfin_write_CAN1_AM15L(val)	bfin_write16(CAN1_AM15L, val)
-#define bfin_read_CAN1_AM15H()		bfin_read16(CAN1_AM15H)
-#define bfin_write_CAN1_AM15H(val)	bfin_write16(CAN1_AM15H, val)
-
-/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
-
-#define bfin_read_CAN1_AM16L()		bfin_read16(CAN1_AM16L)
-#define bfin_write_CAN1_AM16L(val)	bfin_write16(CAN1_AM16L, val)
-#define bfin_read_CAN1_AM16H()		bfin_read16(CAN1_AM16H)
-#define bfin_write_CAN1_AM16H(val)	bfin_write16(CAN1_AM16H, val)
-#define bfin_read_CAN1_AM17L()		bfin_read16(CAN1_AM17L)
-#define bfin_write_CAN1_AM17L(val)	bfin_write16(CAN1_AM17L, val)
-#define bfin_read_CAN1_AM17H()		bfin_read16(CAN1_AM17H)
-#define bfin_write_CAN1_AM17H(val)	bfin_write16(CAN1_AM17H, val)
-#define bfin_read_CAN1_AM18L()		bfin_read16(CAN1_AM18L)
-#define bfin_write_CAN1_AM18L(val)	bfin_write16(CAN1_AM18L, val)
-#define bfin_read_CAN1_AM18H()		bfin_read16(CAN1_AM18H)
-#define bfin_write_CAN1_AM18H(val)	bfin_write16(CAN1_AM18H, val)
-#define bfin_read_CAN1_AM19L()		bfin_read16(CAN1_AM19L)
-#define bfin_write_CAN1_AM19L(val)	bfin_write16(CAN1_AM19L, val)
-#define bfin_read_CAN1_AM19H()		bfin_read16(CAN1_AM19H)
-#define bfin_write_CAN1_AM19H(val)	bfin_write16(CAN1_AM19H, val)
-#define bfin_read_CAN1_AM20L()		bfin_read16(CAN1_AM20L)
-#define bfin_write_CAN1_AM20L(val)	bfin_write16(CAN1_AM20L, val)
-#define bfin_read_CAN1_AM20H()		bfin_read16(CAN1_AM20H)
-#define bfin_write_CAN1_AM20H(val)	bfin_write16(CAN1_AM20H, val)
-#define bfin_read_CAN1_AM21L()		bfin_read16(CAN1_AM21L)
-#define bfin_write_CAN1_AM21L(val)	bfin_write16(CAN1_AM21L, val)
-#define bfin_read_CAN1_AM21H()		bfin_read16(CAN1_AM21H)
-#define bfin_write_CAN1_AM21H(val)	bfin_write16(CAN1_AM21H, val)
-#define bfin_read_CAN1_AM22L()		bfin_read16(CAN1_AM22L)
-#define bfin_write_CAN1_AM22L(val)	bfin_write16(CAN1_AM22L, val)
-#define bfin_read_CAN1_AM22H()		bfin_read16(CAN1_AM22H)
-#define bfin_write_CAN1_AM22H(val)	bfin_write16(CAN1_AM22H, val)
-#define bfin_read_CAN1_AM23L()		bfin_read16(CAN1_AM23L)
-#define bfin_write_CAN1_AM23L(val)	bfin_write16(CAN1_AM23L, val)
-#define bfin_read_CAN1_AM23H()		bfin_read16(CAN1_AM23H)
-#define bfin_write_CAN1_AM23H(val)	bfin_write16(CAN1_AM23H, val)
-#define bfin_read_CAN1_AM24L()		bfin_read16(CAN1_AM24L)
-#define bfin_write_CAN1_AM24L(val)	bfin_write16(CAN1_AM24L, val)
-#define bfin_read_CAN1_AM24H()		bfin_read16(CAN1_AM24H)
-#define bfin_write_CAN1_AM24H(val)	bfin_write16(CAN1_AM24H, val)
-#define bfin_read_CAN1_AM25L()		bfin_read16(CAN1_AM25L)
-#define bfin_write_CAN1_AM25L(val)	bfin_write16(CAN1_AM25L, val)
-#define bfin_read_CAN1_AM25H()		bfin_read16(CAN1_AM25H)
-#define bfin_write_CAN1_AM25H(val)	bfin_write16(CAN1_AM25H, val)
-#define bfin_read_CAN1_AM26L()		bfin_read16(CAN1_AM26L)
-#define bfin_write_CAN1_AM26L(val)	bfin_write16(CAN1_AM26L, val)
-#define bfin_read_CAN1_AM26H()		bfin_read16(CAN1_AM26H)
-#define bfin_write_CAN1_AM26H(val)	bfin_write16(CAN1_AM26H, val)
-#define bfin_read_CAN1_AM27L()		bfin_read16(CAN1_AM27L)
-#define bfin_write_CAN1_AM27L(val)	bfin_write16(CAN1_AM27L, val)
-#define bfin_read_CAN1_AM27H()		bfin_read16(CAN1_AM27H)
-#define bfin_write_CAN1_AM27H(val)	bfin_write16(CAN1_AM27H, val)
-#define bfin_read_CAN1_AM28L()		bfin_read16(CAN1_AM28L)
-#define bfin_write_CAN1_AM28L(val)	bfin_write16(CAN1_AM28L, val)
-#define bfin_read_CAN1_AM28H()		bfin_read16(CAN1_AM28H)
-#define bfin_write_CAN1_AM28H(val)	bfin_write16(CAN1_AM28H, val)
-#define bfin_read_CAN1_AM29L()		bfin_read16(CAN1_AM29L)
-#define bfin_write_CAN1_AM29L(val)	bfin_write16(CAN1_AM29L, val)
-#define bfin_read_CAN1_AM29H()		bfin_read16(CAN1_AM29H)
-#define bfin_write_CAN1_AM29H(val)	bfin_write16(CAN1_AM29H, val)
-#define bfin_read_CAN1_AM30L()		bfin_read16(CAN1_AM30L)
-#define bfin_write_CAN1_AM30L(val)	bfin_write16(CAN1_AM30L, val)
-#define bfin_read_CAN1_AM30H()		bfin_read16(CAN1_AM30H)
-#define bfin_write_CAN1_AM30H(val)	bfin_write16(CAN1_AM30H, val)
-#define bfin_read_CAN1_AM31L()		bfin_read16(CAN1_AM31L)
-#define bfin_write_CAN1_AM31L(val)	bfin_write16(CAN1_AM31L, val)
-#define bfin_read_CAN1_AM31H()		bfin_read16(CAN1_AM31H)
-#define bfin_write_CAN1_AM31H(val)	bfin_write16(CAN1_AM31H, val)
-
-/* CAN Controller 1 Mailbox Data Registers */
-
-#define bfin_read_CAN1_MB00_DATA0()		bfin_read16(CAN1_MB00_DATA0)
-#define bfin_write_CAN1_MB00_DATA0(val)		bfin_write16(CAN1_MB00_DATA0, val)
-#define bfin_read_CAN1_MB00_DATA1()		bfin_read16(CAN1_MB00_DATA1)
-#define bfin_write_CAN1_MB00_DATA1(val)		bfin_write16(CAN1_MB00_DATA1, val)
-#define bfin_read_CAN1_MB00_DATA2()		bfin_read16(CAN1_MB00_DATA2)
-#define bfin_write_CAN1_MB00_DATA2(val)		bfin_write16(CAN1_MB00_DATA2, val)
-#define bfin_read_CAN1_MB00_DATA3()		bfin_read16(CAN1_MB00_DATA3)
-#define bfin_write_CAN1_MB00_DATA3(val)		bfin_write16(CAN1_MB00_DATA3, val)
-#define bfin_read_CAN1_MB00_LENGTH()		bfin_read16(CAN1_MB00_LENGTH)
-#define bfin_write_CAN1_MB00_LENGTH(val)	bfin_write16(CAN1_MB00_LENGTH, val)
-#define bfin_read_CAN1_MB00_TIMESTAMP()		bfin_read16(CAN1_MB00_TIMESTAMP)
-#define bfin_write_CAN1_MB00_TIMESTAMP(val)	bfin_write16(CAN1_MB00_TIMESTAMP, val)
-#define bfin_read_CAN1_MB00_ID0()		bfin_read16(CAN1_MB00_ID0)
-#define bfin_write_CAN1_MB00_ID0(val)		bfin_write16(CAN1_MB00_ID0, val)
-#define bfin_read_CAN1_MB00_ID1()		bfin_read16(CAN1_MB00_ID1)
-#define bfin_write_CAN1_MB00_ID1(val)		bfin_write16(CAN1_MB00_ID1, val)
-#define bfin_read_CAN1_MB01_DATA0()		bfin_read16(CAN1_MB01_DATA0)
-#define bfin_write_CAN1_MB01_DATA0(val)		bfin_write16(CAN1_MB01_DATA0, val)
-#define bfin_read_CAN1_MB01_DATA1()		bfin_read16(CAN1_MB01_DATA1)
-#define bfin_write_CAN1_MB01_DATA1(val)		bfin_write16(CAN1_MB01_DATA1, val)
-#define bfin_read_CAN1_MB01_DATA2()		bfin_read16(CAN1_MB01_DATA2)
-#define bfin_write_CAN1_MB01_DATA2(val)		bfin_write16(CAN1_MB01_DATA2, val)
-#define bfin_read_CAN1_MB01_DATA3()		bfin_read16(CAN1_MB01_DATA3)
-#define bfin_write_CAN1_MB01_DATA3(val)		bfin_write16(CAN1_MB01_DATA3, val)
-#define bfin_read_CAN1_MB01_LENGTH()		bfin_read16(CAN1_MB01_LENGTH)
-#define bfin_write_CAN1_MB01_LENGTH(val)	bfin_write16(CAN1_MB01_LENGTH, val)
-#define bfin_read_CAN1_MB01_TIMESTAMP()		bfin_read16(CAN1_MB01_TIMESTAMP)
-#define bfin_write_CAN1_MB01_TIMESTAMP(val)	bfin_write16(CAN1_MB01_TIMESTAMP, val)
-#define bfin_read_CAN1_MB01_ID0()		bfin_read16(CAN1_MB01_ID0)
-#define bfin_write_CAN1_MB01_ID0(val)		bfin_write16(CAN1_MB01_ID0, val)
-#define bfin_read_CAN1_MB01_ID1()		bfin_read16(CAN1_MB01_ID1)
-#define bfin_write_CAN1_MB01_ID1(val)		bfin_write16(CAN1_MB01_ID1, val)
-#define bfin_read_CAN1_MB02_DATA0()		bfin_read16(CAN1_MB02_DATA0)
-#define bfin_write_CAN1_MB02_DATA0(val)		bfin_write16(CAN1_MB02_DATA0, val)
-#define bfin_read_CAN1_MB02_DATA1()		bfin_read16(CAN1_MB02_DATA1)
-#define bfin_write_CAN1_MB02_DATA1(val)		bfin_write16(CAN1_MB02_DATA1, val)
-#define bfin_read_CAN1_MB02_DATA2()		bfin_read16(CAN1_MB02_DATA2)
-#define bfin_write_CAN1_MB02_DATA2(val)		bfin_write16(CAN1_MB02_DATA2, val)
-#define bfin_read_CAN1_MB02_DATA3()		bfin_read16(CAN1_MB02_DATA3)
-#define bfin_write_CAN1_MB02_DATA3(val)		bfin_write16(CAN1_MB02_DATA3, val)
-#define bfin_read_CAN1_MB02_LENGTH()		bfin_read16(CAN1_MB02_LENGTH)
-#define bfin_write_CAN1_MB02_LENGTH(val)	bfin_write16(CAN1_MB02_LENGTH, val)
-#define bfin_read_CAN1_MB02_TIMESTAMP()		bfin_read16(CAN1_MB02_TIMESTAMP)
-#define bfin_write_CAN1_MB02_TIMESTAMP(val)	bfin_write16(CAN1_MB02_TIMESTAMP, val)
-#define bfin_read_CAN1_MB02_ID0()		bfin_read16(CAN1_MB02_ID0)
-#define bfin_write_CAN1_MB02_ID0(val)		bfin_write16(CAN1_MB02_ID0, val)
-#define bfin_read_CAN1_MB02_ID1()		bfin_read16(CAN1_MB02_ID1)
-#define bfin_write_CAN1_MB02_ID1(val)		bfin_write16(CAN1_MB02_ID1, val)
-#define bfin_read_CAN1_MB03_DATA0()		bfin_read16(CAN1_MB03_DATA0)
-#define bfin_write_CAN1_MB03_DATA0(val)		bfin_write16(CAN1_MB03_DATA0, val)
-#define bfin_read_CAN1_MB03_DATA1()		bfin_read16(CAN1_MB03_DATA1)
-#define bfin_write_CAN1_MB03_DATA1(val)		bfin_write16(CAN1_MB03_DATA1, val)
-#define bfin_read_CAN1_MB03_DATA2()		bfin_read16(CAN1_MB03_DATA2)
-#define bfin_write_CAN1_MB03_DATA2(val)		bfin_write16(CAN1_MB03_DATA2, val)
-#define bfin_read_CAN1_MB03_DATA3()		bfin_read16(CAN1_MB03_DATA3)
-#define bfin_write_CAN1_MB03_DATA3(val)		bfin_write16(CAN1_MB03_DATA3, val)
-#define bfin_read_CAN1_MB03_LENGTH()		bfin_read16(CAN1_MB03_LENGTH)
-#define bfin_write_CAN1_MB03_LENGTH(val)	bfin_write16(CAN1_MB03_LENGTH, val)
-#define bfin_read_CAN1_MB03_TIMESTAMP()		bfin_read16(CAN1_MB03_TIMESTAMP)
-#define bfin_write_CAN1_MB03_TIMESTAMP(val)	bfin_write16(CAN1_MB03_TIMESTAMP, val)
-#define bfin_read_CAN1_MB03_ID0()		bfin_read16(CAN1_MB03_ID0)
-#define bfin_write_CAN1_MB03_ID0(val)		bfin_write16(CAN1_MB03_ID0, val)
-#define bfin_read_CAN1_MB03_ID1()		bfin_read16(CAN1_MB03_ID1)
-#define bfin_write_CAN1_MB03_ID1(val)		bfin_write16(CAN1_MB03_ID1, val)
-#define bfin_read_CAN1_MB04_DATA0()		bfin_read16(CAN1_MB04_DATA0)
-#define bfin_write_CAN1_MB04_DATA0(val)		bfin_write16(CAN1_MB04_DATA0, val)
-#define bfin_read_CAN1_MB04_DATA1()		bfin_read16(CAN1_MB04_DATA1)
-#define bfin_write_CAN1_MB04_DATA1(val)		bfin_write16(CAN1_MB04_DATA1, val)
-#define bfin_read_CAN1_MB04_DATA2()		bfin_read16(CAN1_MB04_DATA2)
-#define bfin_write_CAN1_MB04_DATA2(val)		bfin_write16(CAN1_MB04_DATA2, val)
-#define bfin_read_CAN1_MB04_DATA3()		bfin_read16(CAN1_MB04_DATA3)
-#define bfin_write_CAN1_MB04_DATA3(val)		bfin_write16(CAN1_MB04_DATA3, val)
-#define bfin_read_CAN1_MB04_LENGTH()		bfin_read16(CAN1_MB04_LENGTH)
-#define bfin_write_CAN1_MB04_LENGTH(val)	bfin_write16(CAN1_MB04_LENGTH, val)
-#define bfin_read_CAN1_MB04_TIMESTAMP()		bfin_read16(CAN1_MB04_TIMESTAMP)
-#define bfin_write_CAN1_MB04_TIMESTAMP(val)	bfin_write16(CAN1_MB04_TIMESTAMP, val)
-#define bfin_read_CAN1_MB04_ID0()		bfin_read16(CAN1_MB04_ID0)
-#define bfin_write_CAN1_MB04_ID0(val)		bfin_write16(CAN1_MB04_ID0, val)
-#define bfin_read_CAN1_MB04_ID1()		bfin_read16(CAN1_MB04_ID1)
-#define bfin_write_CAN1_MB04_ID1(val)		bfin_write16(CAN1_MB04_ID1, val)
-#define bfin_read_CAN1_MB05_DATA0()		bfin_read16(CAN1_MB05_DATA0)
-#define bfin_write_CAN1_MB05_DATA0(val)		bfin_write16(CAN1_MB05_DATA0, val)
-#define bfin_read_CAN1_MB05_DATA1()		bfin_read16(CAN1_MB05_DATA1)
-#define bfin_write_CAN1_MB05_DATA1(val)		bfin_write16(CAN1_MB05_DATA1, val)
-#define bfin_read_CAN1_MB05_DATA2()		bfin_read16(CAN1_MB05_DATA2)
-#define bfin_write_CAN1_MB05_DATA2(val)		bfin_write16(CAN1_MB05_DATA2, val)
-#define bfin_read_CAN1_MB05_DATA3()		bfin_read16(CAN1_MB05_DATA3)
-#define bfin_write_CAN1_MB05_DATA3(val)		bfin_write16(CAN1_MB05_DATA3, val)
-#define bfin_read_CAN1_MB05_LENGTH()		bfin_read16(CAN1_MB05_LENGTH)
-#define bfin_write_CAN1_MB05_LENGTH(val)	bfin_write16(CAN1_MB05_LENGTH, val)
-#define bfin_read_CAN1_MB05_TIMESTAMP()		bfin_read16(CAN1_MB05_TIMESTAMP)
-#define bfin_write_CAN1_MB05_TIMESTAMP(val)	bfin_write16(CAN1_MB05_TIMESTAMP, val)
-#define bfin_read_CAN1_MB05_ID0()		bfin_read16(CAN1_MB05_ID0)
-#define bfin_write_CAN1_MB05_ID0(val)		bfin_write16(CAN1_MB05_ID0, val)
-#define bfin_read_CAN1_MB05_ID1()		bfin_read16(CAN1_MB05_ID1)
-#define bfin_write_CAN1_MB05_ID1(val)		bfin_write16(CAN1_MB05_ID1, val)
-#define bfin_read_CAN1_MB06_DATA0()		bfin_read16(CAN1_MB06_DATA0)
-#define bfin_write_CAN1_MB06_DATA0(val)		bfin_write16(CAN1_MB06_DATA0, val)
-#define bfin_read_CAN1_MB06_DATA1()		bfin_read16(CAN1_MB06_DATA1)
-#define bfin_write_CAN1_MB06_DATA1(val)		bfin_write16(CAN1_MB06_DATA1, val)
-#define bfin_read_CAN1_MB06_DATA2()		bfin_read16(CAN1_MB06_DATA2)
-#define bfin_write_CAN1_MB06_DATA2(val)		bfin_write16(CAN1_MB06_DATA2, val)
-#define bfin_read_CAN1_MB06_DATA3()		bfin_read16(CAN1_MB06_DATA3)
-#define bfin_write_CAN1_MB06_DATA3(val)		bfin_write16(CAN1_MB06_DATA3, val)
-#define bfin_read_CAN1_MB06_LENGTH()		bfin_read16(CAN1_MB06_LENGTH)
-#define bfin_write_CAN1_MB06_LENGTH(val)	bfin_write16(CAN1_MB06_LENGTH, val)
-#define bfin_read_CAN1_MB06_TIMESTAMP()		bfin_read16(CAN1_MB06_TIMESTAMP)
-#define bfin_write_CAN1_MB06_TIMESTAMP(val)	bfin_write16(CAN1_MB06_TIMESTAMP, val)
-#define bfin_read_CAN1_MB06_ID0()		bfin_read16(CAN1_MB06_ID0)
-#define bfin_write_CAN1_MB06_ID0(val)		bfin_write16(CAN1_MB06_ID0, val)
-#define bfin_read_CAN1_MB06_ID1()		bfin_read16(CAN1_MB06_ID1)
-#define bfin_write_CAN1_MB06_ID1(val)		bfin_write16(CAN1_MB06_ID1, val)
-#define bfin_read_CAN1_MB07_DATA0()		bfin_read16(CAN1_MB07_DATA0)
-#define bfin_write_CAN1_MB07_DATA0(val)		bfin_write16(CAN1_MB07_DATA0, val)
-#define bfin_read_CAN1_MB07_DATA1()		bfin_read16(CAN1_MB07_DATA1)
-#define bfin_write_CAN1_MB07_DATA1(val)		bfin_write16(CAN1_MB07_DATA1, val)
-#define bfin_read_CAN1_MB07_DATA2()		bfin_read16(CAN1_MB07_DATA2)
-#define bfin_write_CAN1_MB07_DATA2(val)		bfin_write16(CAN1_MB07_DATA2, val)
-#define bfin_read_CAN1_MB07_DATA3()		bfin_read16(CAN1_MB07_DATA3)
-#define bfin_write_CAN1_MB07_DATA3(val)		bfin_write16(CAN1_MB07_DATA3, val)
-#define bfin_read_CAN1_MB07_LENGTH()		bfin_read16(CAN1_MB07_LENGTH)
-#define bfin_write_CAN1_MB07_LENGTH(val)	bfin_write16(CAN1_MB07_LENGTH, val)
-#define bfin_read_CAN1_MB07_TIMESTAMP()		bfin_read16(CAN1_MB07_TIMESTAMP)
-#define bfin_write_CAN1_MB07_TIMESTAMP(val)	bfin_write16(CAN1_MB07_TIMESTAMP, val)
-#define bfin_read_CAN1_MB07_ID0()		bfin_read16(CAN1_MB07_ID0)
-#define bfin_write_CAN1_MB07_ID0(val)		bfin_write16(CAN1_MB07_ID0, val)
-#define bfin_read_CAN1_MB07_ID1()		bfin_read16(CAN1_MB07_ID1)
-#define bfin_write_CAN1_MB07_ID1(val)		bfin_write16(CAN1_MB07_ID1, val)
-#define bfin_read_CAN1_MB08_DATA0()		bfin_read16(CAN1_MB08_DATA0)
-#define bfin_write_CAN1_MB08_DATA0(val)		bfin_write16(CAN1_MB08_DATA0, val)
-#define bfin_read_CAN1_MB08_DATA1()		bfin_read16(CAN1_MB08_DATA1)
-#define bfin_write_CAN1_MB08_DATA1(val)		bfin_write16(CAN1_MB08_DATA1, val)
-#define bfin_read_CAN1_MB08_DATA2()		bfin_read16(CAN1_MB08_DATA2)
-#define bfin_write_CAN1_MB08_DATA2(val)		bfin_write16(CAN1_MB08_DATA2, val)
-#define bfin_read_CAN1_MB08_DATA3()		bfin_read16(CAN1_MB08_DATA3)
-#define bfin_write_CAN1_MB08_DATA3(val)		bfin_write16(CAN1_MB08_DATA3, val)
-#define bfin_read_CAN1_MB08_LENGTH()		bfin_read16(CAN1_MB08_LENGTH)
-#define bfin_write_CAN1_MB08_LENGTH(val)	bfin_write16(CAN1_MB08_LENGTH, val)
-#define bfin_read_CAN1_MB08_TIMESTAMP()		bfin_read16(CAN1_MB08_TIMESTAMP)
-#define bfin_write_CAN1_MB08_TIMESTAMP(val)	bfin_write16(CAN1_MB08_TIMESTAMP, val)
-#define bfin_read_CAN1_MB08_ID0()		bfin_read16(CAN1_MB08_ID0)
-#define bfin_write_CAN1_MB08_ID0(val)		bfin_write16(CAN1_MB08_ID0, val)
-#define bfin_read_CAN1_MB08_ID1()		bfin_read16(CAN1_MB08_ID1)
-#define bfin_write_CAN1_MB08_ID1(val)		bfin_write16(CAN1_MB08_ID1, val)
-#define bfin_read_CAN1_MB09_DATA0()		bfin_read16(CAN1_MB09_DATA0)
-#define bfin_write_CAN1_MB09_DATA0(val)		bfin_write16(CAN1_MB09_DATA0, val)
-#define bfin_read_CAN1_MB09_DATA1()		bfin_read16(CAN1_MB09_DATA1)
-#define bfin_write_CAN1_MB09_DATA1(val)		bfin_write16(CAN1_MB09_DATA1, val)
-#define bfin_read_CAN1_MB09_DATA2()		bfin_read16(CAN1_MB09_DATA2)
-#define bfin_write_CAN1_MB09_DATA2(val)		bfin_write16(CAN1_MB09_DATA2, val)
-#define bfin_read_CAN1_MB09_DATA3()		bfin_read16(CAN1_MB09_DATA3)
-#define bfin_write_CAN1_MB09_DATA3(val)		bfin_write16(CAN1_MB09_DATA3, val)
-#define bfin_read_CAN1_MB09_LENGTH()		bfin_read16(CAN1_MB09_LENGTH)
-#define bfin_write_CAN1_MB09_LENGTH(val)	bfin_write16(CAN1_MB09_LENGTH, val)
-#define bfin_read_CAN1_MB09_TIMESTAMP()		bfin_read16(CAN1_MB09_TIMESTAMP)
-#define bfin_write_CAN1_MB09_TIMESTAMP(val)	bfin_write16(CAN1_MB09_TIMESTAMP, val)
-#define bfin_read_CAN1_MB09_ID0()		bfin_read16(CAN1_MB09_ID0)
-#define bfin_write_CAN1_MB09_ID0(val)		bfin_write16(CAN1_MB09_ID0, val)
-#define bfin_read_CAN1_MB09_ID1()		bfin_read16(CAN1_MB09_ID1)
-#define bfin_write_CAN1_MB09_ID1(val)		bfin_write16(CAN1_MB09_ID1, val)
-#define bfin_read_CAN1_MB10_DATA0()		bfin_read16(CAN1_MB10_DATA0)
-#define bfin_write_CAN1_MB10_DATA0(val)		bfin_write16(CAN1_MB10_DATA0, val)
-#define bfin_read_CAN1_MB10_DATA1()		bfin_read16(CAN1_MB10_DATA1)
-#define bfin_write_CAN1_MB10_DATA1(val)		bfin_write16(CAN1_MB10_DATA1, val)
-#define bfin_read_CAN1_MB10_DATA2()		bfin_read16(CAN1_MB10_DATA2)
-#define bfin_write_CAN1_MB10_DATA2(val)		bfin_write16(CAN1_MB10_DATA2, val)
-#define bfin_read_CAN1_MB10_DATA3()		bfin_read16(CAN1_MB10_DATA3)
-#define bfin_write_CAN1_MB10_DATA3(val)		bfin_write16(CAN1_MB10_DATA3, val)
-#define bfin_read_CAN1_MB10_LENGTH()		bfin_read16(CAN1_MB10_LENGTH)
-#define bfin_write_CAN1_MB10_LENGTH(val)	bfin_write16(CAN1_MB10_LENGTH, val)
-#define bfin_read_CAN1_MB10_TIMESTAMP()		bfin_read16(CAN1_MB10_TIMESTAMP)
-#define bfin_write_CAN1_MB10_TIMESTAMP(val)	bfin_write16(CAN1_MB10_TIMESTAMP, val)
-#define bfin_read_CAN1_MB10_ID0()		bfin_read16(CAN1_MB10_ID0)
-#define bfin_write_CAN1_MB10_ID0(val)		bfin_write16(CAN1_MB10_ID0, val)
-#define bfin_read_CAN1_MB10_ID1()		bfin_read16(CAN1_MB10_ID1)
-#define bfin_write_CAN1_MB10_ID1(val)		bfin_write16(CAN1_MB10_ID1, val)
-#define bfin_read_CAN1_MB11_DATA0()		bfin_read16(CAN1_MB11_DATA0)
-#define bfin_write_CAN1_MB11_DATA0(val)		bfin_write16(CAN1_MB11_DATA0, val)
-#define bfin_read_CAN1_MB11_DATA1()		bfin_read16(CAN1_MB11_DATA1)
-#define bfin_write_CAN1_MB11_DATA1(val)		bfin_write16(CAN1_MB11_DATA1, val)
-#define bfin_read_CAN1_MB11_DATA2()		bfin_read16(CAN1_MB11_DATA2)
-#define bfin_write_CAN1_MB11_DATA2(val)		bfin_write16(CAN1_MB11_DATA2, val)
-#define bfin_read_CAN1_MB11_DATA3()		bfin_read16(CAN1_MB11_DATA3)
-#define bfin_write_CAN1_MB11_DATA3(val)		bfin_write16(CAN1_MB11_DATA3, val)
-#define bfin_read_CAN1_MB11_LENGTH()		bfin_read16(CAN1_MB11_LENGTH)
-#define bfin_write_CAN1_MB11_LENGTH(val)	bfin_write16(CAN1_MB11_LENGTH, val)
-#define bfin_read_CAN1_MB11_TIMESTAMP()		bfin_read16(CAN1_MB11_TIMESTAMP)
-#define bfin_write_CAN1_MB11_TIMESTAMP(val)	bfin_write16(CAN1_MB11_TIMESTAMP, val)
-#define bfin_read_CAN1_MB11_ID0()		bfin_read16(CAN1_MB11_ID0)
-#define bfin_write_CAN1_MB11_ID0(val)		bfin_write16(CAN1_MB11_ID0, val)
-#define bfin_read_CAN1_MB11_ID1()		bfin_read16(CAN1_MB11_ID1)
-#define bfin_write_CAN1_MB11_ID1(val)		bfin_write16(CAN1_MB11_ID1, val)
-#define bfin_read_CAN1_MB12_DATA0()		bfin_read16(CAN1_MB12_DATA0)
-#define bfin_write_CAN1_MB12_DATA0(val)		bfin_write16(CAN1_MB12_DATA0, val)
-#define bfin_read_CAN1_MB12_DATA1()		bfin_read16(CAN1_MB12_DATA1)
-#define bfin_write_CAN1_MB12_DATA1(val)		bfin_write16(CAN1_MB12_DATA1, val)
-#define bfin_read_CAN1_MB12_DATA2()		bfin_read16(CAN1_MB12_DATA2)
-#define bfin_write_CAN1_MB12_DATA2(val)		bfin_write16(CAN1_MB12_DATA2, val)
-#define bfin_read_CAN1_MB12_DATA3()		bfin_read16(CAN1_MB12_DATA3)
-#define bfin_write_CAN1_MB12_DATA3(val)		bfin_write16(CAN1_MB12_DATA3, val)
-#define bfin_read_CAN1_MB12_LENGTH()		bfin_read16(CAN1_MB12_LENGTH)
-#define bfin_write_CAN1_MB12_LENGTH(val)	bfin_write16(CAN1_MB12_LENGTH, val)
-#define bfin_read_CAN1_MB12_TIMESTAMP()		bfin_read16(CAN1_MB12_TIMESTAMP)
-#define bfin_write_CAN1_MB12_TIMESTAMP(val)	bfin_write16(CAN1_MB12_TIMESTAMP, val)
-#define bfin_read_CAN1_MB12_ID0()		bfin_read16(CAN1_MB12_ID0)
-#define bfin_write_CAN1_MB12_ID0(val)		bfin_write16(CAN1_MB12_ID0, val)
-#define bfin_read_CAN1_MB12_ID1()		bfin_read16(CAN1_MB12_ID1)
-#define bfin_write_CAN1_MB12_ID1(val)		bfin_write16(CAN1_MB12_ID1, val)
-#define bfin_read_CAN1_MB13_DATA0()		bfin_read16(CAN1_MB13_DATA0)
-#define bfin_write_CAN1_MB13_DATA0(val)		bfin_write16(CAN1_MB13_DATA0, val)
-#define bfin_read_CAN1_MB13_DATA1()		bfin_read16(CAN1_MB13_DATA1)
-#define bfin_write_CAN1_MB13_DATA1(val)		bfin_write16(CAN1_MB13_DATA1, val)
-#define bfin_read_CAN1_MB13_DATA2()		bfin_read16(CAN1_MB13_DATA2)
-#define bfin_write_CAN1_MB13_DATA2(val)		bfin_write16(CAN1_MB13_DATA2, val)
-#define bfin_read_CAN1_MB13_DATA3()		bfin_read16(CAN1_MB13_DATA3)
-#define bfin_write_CAN1_MB13_DATA3(val)		bfin_write16(CAN1_MB13_DATA3, val)
-#define bfin_read_CAN1_MB13_LENGTH()		bfin_read16(CAN1_MB13_LENGTH)
-#define bfin_write_CAN1_MB13_LENGTH(val)	bfin_write16(CAN1_MB13_LENGTH, val)
-#define bfin_read_CAN1_MB13_TIMESTAMP()		bfin_read16(CAN1_MB13_TIMESTAMP)
-#define bfin_write_CAN1_MB13_TIMESTAMP(val)	bfin_write16(CAN1_MB13_TIMESTAMP, val)
-#define bfin_read_CAN1_MB13_ID0()		bfin_read16(CAN1_MB13_ID0)
-#define bfin_write_CAN1_MB13_ID0(val)		bfin_write16(CAN1_MB13_ID0, val)
-#define bfin_read_CAN1_MB13_ID1()		bfin_read16(CAN1_MB13_ID1)
-#define bfin_write_CAN1_MB13_ID1(val)		bfin_write16(CAN1_MB13_ID1, val)
-#define bfin_read_CAN1_MB14_DATA0()		bfin_read16(CAN1_MB14_DATA0)
-#define bfin_write_CAN1_MB14_DATA0(val)		bfin_write16(CAN1_MB14_DATA0, val)
-#define bfin_read_CAN1_MB14_DATA1()		bfin_read16(CAN1_MB14_DATA1)
-#define bfin_write_CAN1_MB14_DATA1(val)		bfin_write16(CAN1_MB14_DATA1, val)
-#define bfin_read_CAN1_MB14_DATA2()		bfin_read16(CAN1_MB14_DATA2)
-#define bfin_write_CAN1_MB14_DATA2(val)		bfin_write16(CAN1_MB14_DATA2, val)
-#define bfin_read_CAN1_MB14_DATA3()		bfin_read16(CAN1_MB14_DATA3)
-#define bfin_write_CAN1_MB14_DATA3(val)		bfin_write16(CAN1_MB14_DATA3, val)
-#define bfin_read_CAN1_MB14_LENGTH()		bfin_read16(CAN1_MB14_LENGTH)
-#define bfin_write_CAN1_MB14_LENGTH(val)	bfin_write16(CAN1_MB14_LENGTH, val)
-#define bfin_read_CAN1_MB14_TIMESTAMP()		bfin_read16(CAN1_MB14_TIMESTAMP)
-#define bfin_write_CAN1_MB14_TIMESTAMP(val)	bfin_write16(CAN1_MB14_TIMESTAMP, val)
-#define bfin_read_CAN1_MB14_ID0()		bfin_read16(CAN1_MB14_ID0)
-#define bfin_write_CAN1_MB14_ID0(val)		bfin_write16(CAN1_MB14_ID0, val)
-#define bfin_read_CAN1_MB14_ID1()		bfin_read16(CAN1_MB14_ID1)
-#define bfin_write_CAN1_MB14_ID1(val)		bfin_write16(CAN1_MB14_ID1, val)
-#define bfin_read_CAN1_MB15_DATA0()		bfin_read16(CAN1_MB15_DATA0)
-#define bfin_write_CAN1_MB15_DATA0(val)		bfin_write16(CAN1_MB15_DATA0, val)
-#define bfin_read_CAN1_MB15_DATA1()		bfin_read16(CAN1_MB15_DATA1)
-#define bfin_write_CAN1_MB15_DATA1(val)		bfin_write16(CAN1_MB15_DATA1, val)
-#define bfin_read_CAN1_MB15_DATA2()		bfin_read16(CAN1_MB15_DATA2)
-#define bfin_write_CAN1_MB15_DATA2(val)		bfin_write16(CAN1_MB15_DATA2, val)
-#define bfin_read_CAN1_MB15_DATA3()		bfin_read16(CAN1_MB15_DATA3)
-#define bfin_write_CAN1_MB15_DATA3(val)		bfin_write16(CAN1_MB15_DATA3, val)
-#define bfin_read_CAN1_MB15_LENGTH()		bfin_read16(CAN1_MB15_LENGTH)
-#define bfin_write_CAN1_MB15_LENGTH(val)	bfin_write16(CAN1_MB15_LENGTH, val)
-#define bfin_read_CAN1_MB15_TIMESTAMP()		bfin_read16(CAN1_MB15_TIMESTAMP)
-#define bfin_write_CAN1_MB15_TIMESTAMP(val)	bfin_write16(CAN1_MB15_TIMESTAMP, val)
-#define bfin_read_CAN1_MB15_ID0()		bfin_read16(CAN1_MB15_ID0)
-#define bfin_write_CAN1_MB15_ID0(val)		bfin_write16(CAN1_MB15_ID0, val)
-#define bfin_read_CAN1_MB15_ID1()		bfin_read16(CAN1_MB15_ID1)
-#define bfin_write_CAN1_MB15_ID1(val)		bfin_write16(CAN1_MB15_ID1, val)
-
-/* CAN Controller 1 Mailbox Data Registers */
-
-#define bfin_read_CAN1_MB16_DATA0()		bfin_read16(CAN1_MB16_DATA0)
-#define bfin_write_CAN1_MB16_DATA0(val)		bfin_write16(CAN1_MB16_DATA0, val)
-#define bfin_read_CAN1_MB16_DATA1()		bfin_read16(CAN1_MB16_DATA1)
-#define bfin_write_CAN1_MB16_DATA1(val)		bfin_write16(CAN1_MB16_DATA1, val)
-#define bfin_read_CAN1_MB16_DATA2()		bfin_read16(CAN1_MB16_DATA2)
-#define bfin_write_CAN1_MB16_DATA2(val)		bfin_write16(CAN1_MB16_DATA2, val)
-#define bfin_read_CAN1_MB16_DATA3()		bfin_read16(CAN1_MB16_DATA3)
-#define bfin_write_CAN1_MB16_DATA3(val)		bfin_write16(CAN1_MB16_DATA3, val)
-#define bfin_read_CAN1_MB16_LENGTH()		bfin_read16(CAN1_MB16_LENGTH)
-#define bfin_write_CAN1_MB16_LENGTH(val)	bfin_write16(CAN1_MB16_LENGTH, val)
-#define bfin_read_CAN1_MB16_TIMESTAMP()		bfin_read16(CAN1_MB16_TIMESTAMP)
-#define bfin_write_CAN1_MB16_TIMESTAMP(val)	bfin_write16(CAN1_MB16_TIMESTAMP, val)
-#define bfin_read_CAN1_MB16_ID0()		bfin_read16(CAN1_MB16_ID0)
-#define bfin_write_CAN1_MB16_ID0(val)		bfin_write16(CAN1_MB16_ID0, val)
-#define bfin_read_CAN1_MB16_ID1()		bfin_read16(CAN1_MB16_ID1)
-#define bfin_write_CAN1_MB16_ID1(val)		bfin_write16(CAN1_MB16_ID1, val)
-#define bfin_read_CAN1_MB17_DATA0()		bfin_read16(CAN1_MB17_DATA0)
-#define bfin_write_CAN1_MB17_DATA0(val)		bfin_write16(CAN1_MB17_DATA0, val)
-#define bfin_read_CAN1_MB17_DATA1()		bfin_read16(CAN1_MB17_DATA1)
-#define bfin_write_CAN1_MB17_DATA1(val)		bfin_write16(CAN1_MB17_DATA1, val)
-#define bfin_read_CAN1_MB17_DATA2()		bfin_read16(CAN1_MB17_DATA2)
-#define bfin_write_CAN1_MB17_DATA2(val)		bfin_write16(CAN1_MB17_DATA2, val)
-#define bfin_read_CAN1_MB17_DATA3()		bfin_read16(CAN1_MB17_DATA3)
-#define bfin_write_CAN1_MB17_DATA3(val)		bfin_write16(CAN1_MB17_DATA3, val)
-#define bfin_read_CAN1_MB17_LENGTH()		bfin_read16(CAN1_MB17_LENGTH)
-#define bfin_write_CAN1_MB17_LENGTH(val)	bfin_write16(CAN1_MB17_LENGTH, val)
-#define bfin_read_CAN1_MB17_TIMESTAMP()		bfin_read16(CAN1_MB17_TIMESTAMP)
-#define bfin_write_CAN1_MB17_TIMESTAMP(val)	bfin_write16(CAN1_MB17_TIMESTAMP, val)
-#define bfin_read_CAN1_MB17_ID0()		bfin_read16(CAN1_MB17_ID0)
-#define bfin_write_CAN1_MB17_ID0(val)		bfin_write16(CAN1_MB17_ID0, val)
-#define bfin_read_CAN1_MB17_ID1()		bfin_read16(CAN1_MB17_ID1)
-#define bfin_write_CAN1_MB17_ID1(val)		bfin_write16(CAN1_MB17_ID1, val)
-#define bfin_read_CAN1_MB18_DATA0()		bfin_read16(CAN1_MB18_DATA0)
-#define bfin_write_CAN1_MB18_DATA0(val)		bfin_write16(CAN1_MB18_DATA0, val)
-#define bfin_read_CAN1_MB18_DATA1()		bfin_read16(CAN1_MB18_DATA1)
-#define bfin_write_CAN1_MB18_DATA1(val)		bfin_write16(CAN1_MB18_DATA1, val)
-#define bfin_read_CAN1_MB18_DATA2()		bfin_read16(CAN1_MB18_DATA2)
-#define bfin_write_CAN1_MB18_DATA2(val)		bfin_write16(CAN1_MB18_DATA2, val)
-#define bfin_read_CAN1_MB18_DATA3()		bfin_read16(CAN1_MB18_DATA3)
-#define bfin_write_CAN1_MB18_DATA3(val)		bfin_write16(CAN1_MB18_DATA3, val)
-#define bfin_read_CAN1_MB18_LENGTH()		bfin_read16(CAN1_MB18_LENGTH)
-#define bfin_write_CAN1_MB18_LENGTH(val)	bfin_write16(CAN1_MB18_LENGTH, val)
-#define bfin_read_CAN1_MB18_TIMESTAMP()		bfin_read16(CAN1_MB18_TIMESTAMP)
-#define bfin_write_CAN1_MB18_TIMESTAMP(val)	bfin_write16(CAN1_MB18_TIMESTAMP, val)
-#define bfin_read_CAN1_MB18_ID0()		bfin_read16(CAN1_MB18_ID0)
-#define bfin_write_CAN1_MB18_ID0(val)		bfin_write16(CAN1_MB18_ID0, val)
-#define bfin_read_CAN1_MB18_ID1()		bfin_read16(CAN1_MB18_ID1)
-#define bfin_write_CAN1_MB18_ID1(val)		bfin_write16(CAN1_MB18_ID1, val)
-#define bfin_read_CAN1_MB19_DATA0()		bfin_read16(CAN1_MB19_DATA0)
-#define bfin_write_CAN1_MB19_DATA0(val)		bfin_write16(CAN1_MB19_DATA0, val)
-#define bfin_read_CAN1_MB19_DATA1()		bfin_read16(CAN1_MB19_DATA1)
-#define bfin_write_CAN1_MB19_DATA1(val)		bfin_write16(CAN1_MB19_DATA1, val)
-#define bfin_read_CAN1_MB19_DATA2()		bfin_read16(CAN1_MB19_DATA2)
-#define bfin_write_CAN1_MB19_DATA2(val)		bfin_write16(CAN1_MB19_DATA2, val)
-#define bfin_read_CAN1_MB19_DATA3()		bfin_read16(CAN1_MB19_DATA3)
-#define bfin_write_CAN1_MB19_DATA3(val)		bfin_write16(CAN1_MB19_DATA3, val)
-#define bfin_read_CAN1_MB19_LENGTH()		bfin_read16(CAN1_MB19_LENGTH)
-#define bfin_write_CAN1_MB19_LENGTH(val)	bfin_write16(CAN1_MB19_LENGTH, val)
-#define bfin_read_CAN1_MB19_TIMESTAMP()		bfin_read16(CAN1_MB19_TIMESTAMP)
-#define bfin_write_CAN1_MB19_TIMESTAMP(val)	bfin_write16(CAN1_MB19_TIMESTAMP, val)
-#define bfin_read_CAN1_MB19_ID0()		bfin_read16(CAN1_MB19_ID0)
-#define bfin_write_CAN1_MB19_ID0(val)		bfin_write16(CAN1_MB19_ID0, val)
-#define bfin_read_CAN1_MB19_ID1()		bfin_read16(CAN1_MB19_ID1)
-#define bfin_write_CAN1_MB19_ID1(val)		bfin_write16(CAN1_MB19_ID1, val)
-#define bfin_read_CAN1_MB20_DATA0()		bfin_read16(CAN1_MB20_DATA0)
-#define bfin_write_CAN1_MB20_DATA0(val)		bfin_write16(CAN1_MB20_DATA0, val)
-#define bfin_read_CAN1_MB20_DATA1()		bfin_read16(CAN1_MB20_DATA1)
-#define bfin_write_CAN1_MB20_DATA1(val)		bfin_write16(CAN1_MB20_DATA1, val)
-#define bfin_read_CAN1_MB20_DATA2()		bfin_read16(CAN1_MB20_DATA2)
-#define bfin_write_CAN1_MB20_DATA2(val)		bfin_write16(CAN1_MB20_DATA2, val)
-#define bfin_read_CAN1_MB20_DATA3()		bfin_read16(CAN1_MB20_DATA3)
-#define bfin_write_CAN1_MB20_DATA3(val)		bfin_write16(CAN1_MB20_DATA3, val)
-#define bfin_read_CAN1_MB20_LENGTH()		bfin_read16(CAN1_MB20_LENGTH)
-#define bfin_write_CAN1_MB20_LENGTH(val)	bfin_write16(CAN1_MB20_LENGTH, val)
-#define bfin_read_CAN1_MB20_TIMESTAMP()		bfin_read16(CAN1_MB20_TIMESTAMP)
-#define bfin_write_CAN1_MB20_TIMESTAMP(val)	bfin_write16(CAN1_MB20_TIMESTAMP, val)
-#define bfin_read_CAN1_MB20_ID0()		bfin_read16(CAN1_MB20_ID0)
-#define bfin_write_CAN1_MB20_ID0(val)		bfin_write16(CAN1_MB20_ID0, val)
-#define bfin_read_CAN1_MB20_ID1()		bfin_read16(CAN1_MB20_ID1)
-#define bfin_write_CAN1_MB20_ID1(val)		bfin_write16(CAN1_MB20_ID1, val)
-#define bfin_read_CAN1_MB21_DATA0()		bfin_read16(CAN1_MB21_DATA0)
-#define bfin_write_CAN1_MB21_DATA0(val)		bfin_write16(CAN1_MB21_DATA0, val)
-#define bfin_read_CAN1_MB21_DATA1()		bfin_read16(CAN1_MB21_DATA1)
-#define bfin_write_CAN1_MB21_DATA1(val)		bfin_write16(CAN1_MB21_DATA1, val)
-#define bfin_read_CAN1_MB21_DATA2()		bfin_read16(CAN1_MB21_DATA2)
-#define bfin_write_CAN1_MB21_DATA2(val)		bfin_write16(CAN1_MB21_DATA2, val)
-#define bfin_read_CAN1_MB21_DATA3()		bfin_read16(CAN1_MB21_DATA3)
-#define bfin_write_CAN1_MB21_DATA3(val)		bfin_write16(CAN1_MB21_DATA3, val)
-#define bfin_read_CAN1_MB21_LENGTH()		bfin_read16(CAN1_MB21_LENGTH)
-#define bfin_write_CAN1_MB21_LENGTH(val)	bfin_write16(CAN1_MB21_LENGTH, val)
-#define bfin_read_CAN1_MB21_TIMESTAMP()		bfin_read16(CAN1_MB21_TIMESTAMP)
-#define bfin_write_CAN1_MB21_TIMESTAMP(val)	bfin_write16(CAN1_MB21_TIMESTAMP, val)
-#define bfin_read_CAN1_MB21_ID0()		bfin_read16(CAN1_MB21_ID0)
-#define bfin_write_CAN1_MB21_ID0(val)		bfin_write16(CAN1_MB21_ID0, val)
-#define bfin_read_CAN1_MB21_ID1()		bfin_read16(CAN1_MB21_ID1)
-#define bfin_write_CAN1_MB21_ID1(val)		bfin_write16(CAN1_MB21_ID1, val)
-#define bfin_read_CAN1_MB22_DATA0()		bfin_read16(CAN1_MB22_DATA0)
-#define bfin_write_CAN1_MB22_DATA0(val)		bfin_write16(CAN1_MB22_DATA0, val)
-#define bfin_read_CAN1_MB22_DATA1()		bfin_read16(CAN1_MB22_DATA1)
-#define bfin_write_CAN1_MB22_DATA1(val)		bfin_write16(CAN1_MB22_DATA1, val)
-#define bfin_read_CAN1_MB22_DATA2()		bfin_read16(CAN1_MB22_DATA2)
-#define bfin_write_CAN1_MB22_DATA2(val)		bfin_write16(CAN1_MB22_DATA2, val)
-#define bfin_read_CAN1_MB22_DATA3()		bfin_read16(CAN1_MB22_DATA3)
-#define bfin_write_CAN1_MB22_DATA3(val)		bfin_write16(CAN1_MB22_DATA3, val)
-#define bfin_read_CAN1_MB22_LENGTH()		bfin_read16(CAN1_MB22_LENGTH)
-#define bfin_write_CAN1_MB22_LENGTH(val)	bfin_write16(CAN1_MB22_LENGTH, val)
-#define bfin_read_CAN1_MB22_TIMESTAMP()		bfin_read16(CAN1_MB22_TIMESTAMP)
-#define bfin_write_CAN1_MB22_TIMESTAMP(val)	bfin_write16(CAN1_MB22_TIMESTAMP, val)
-#define bfin_read_CAN1_MB22_ID0()		bfin_read16(CAN1_MB22_ID0)
-#define bfin_write_CAN1_MB22_ID0(val)		bfin_write16(CAN1_MB22_ID0, val)
-#define bfin_read_CAN1_MB22_ID1()		bfin_read16(CAN1_MB22_ID1)
-#define bfin_write_CAN1_MB22_ID1(val)		bfin_write16(CAN1_MB22_ID1, val)
-#define bfin_read_CAN1_MB23_DATA0()		bfin_read16(CAN1_MB23_DATA0)
-#define bfin_write_CAN1_MB23_DATA0(val)		bfin_write16(CAN1_MB23_DATA0, val)
-#define bfin_read_CAN1_MB23_DATA1()		bfin_read16(CAN1_MB23_DATA1)
-#define bfin_write_CAN1_MB23_DATA1(val)		bfin_write16(CAN1_MB23_DATA1, val)
-#define bfin_read_CAN1_MB23_DATA2()		bfin_read16(CAN1_MB23_DATA2)
-#define bfin_write_CAN1_MB23_DATA2(val)		bfin_write16(CAN1_MB23_DATA2, val)
-#define bfin_read_CAN1_MB23_DATA3()		bfin_read16(CAN1_MB23_DATA3)
-#define bfin_write_CAN1_MB23_DATA3(val)		bfin_write16(CAN1_MB23_DATA3, val)
-#define bfin_read_CAN1_MB23_LENGTH()		bfin_read16(CAN1_MB23_LENGTH)
-#define bfin_write_CAN1_MB23_LENGTH(val)	bfin_write16(CAN1_MB23_LENGTH, val)
-#define bfin_read_CAN1_MB23_TIMESTAMP()		bfin_read16(CAN1_MB23_TIMESTAMP)
-#define bfin_write_CAN1_MB23_TIMESTAMP(val)	bfin_write16(CAN1_MB23_TIMESTAMP, val)
-#define bfin_read_CAN1_MB23_ID0()		bfin_read16(CAN1_MB23_ID0)
-#define bfin_write_CAN1_MB23_ID0(val)		bfin_write16(CAN1_MB23_ID0, val)
-#define bfin_read_CAN1_MB23_ID1()		bfin_read16(CAN1_MB23_ID1)
-#define bfin_write_CAN1_MB23_ID1(val)		bfin_write16(CAN1_MB23_ID1, val)
-#define bfin_read_CAN1_MB24_DATA0()		bfin_read16(CAN1_MB24_DATA0)
-#define bfin_write_CAN1_MB24_DATA0(val)		bfin_write16(CAN1_MB24_DATA0, val)
-#define bfin_read_CAN1_MB24_DATA1()		bfin_read16(CAN1_MB24_DATA1)
-#define bfin_write_CAN1_MB24_DATA1(val)		bfin_write16(CAN1_MB24_DATA1, val)
-#define bfin_read_CAN1_MB24_DATA2()		bfin_read16(CAN1_MB24_DATA2)
-#define bfin_write_CAN1_MB24_DATA2(val)		bfin_write16(CAN1_MB24_DATA2, val)
-#define bfin_read_CAN1_MB24_DATA3()		bfin_read16(CAN1_MB24_DATA3)
-#define bfin_write_CAN1_MB24_DATA3(val)		bfin_write16(CAN1_MB24_DATA3, val)
-#define bfin_read_CAN1_MB24_LENGTH()		bfin_read16(CAN1_MB24_LENGTH)
-#define bfin_write_CAN1_MB24_LENGTH(val)	bfin_write16(CAN1_MB24_LENGTH, val)
-#define bfin_read_CAN1_MB24_TIMESTAMP()		bfin_read16(CAN1_MB24_TIMESTAMP)
-#define bfin_write_CAN1_MB24_TIMESTAMP(val)	bfin_write16(CAN1_MB24_TIMESTAMP, val)
-#define bfin_read_CAN1_MB24_ID0()		bfin_read16(CAN1_MB24_ID0)
-#define bfin_write_CAN1_MB24_ID0(val)		bfin_write16(CAN1_MB24_ID0, val)
-#define bfin_read_CAN1_MB24_ID1()		bfin_read16(CAN1_MB24_ID1)
-#define bfin_write_CAN1_MB24_ID1(val)		bfin_write16(CAN1_MB24_ID1, val)
-#define bfin_read_CAN1_MB25_DATA0()		bfin_read16(CAN1_MB25_DATA0)
-#define bfin_write_CAN1_MB25_DATA0(val)		bfin_write16(CAN1_MB25_DATA0, val)
-#define bfin_read_CAN1_MB25_DATA1()		bfin_read16(CAN1_MB25_DATA1)
-#define bfin_write_CAN1_MB25_DATA1(val)		bfin_write16(CAN1_MB25_DATA1, val)
-#define bfin_read_CAN1_MB25_DATA2()		bfin_read16(CAN1_MB25_DATA2)
-#define bfin_write_CAN1_MB25_DATA2(val)		bfin_write16(CAN1_MB25_DATA2, val)
-#define bfin_read_CAN1_MB25_DATA3()		bfin_read16(CAN1_MB25_DATA3)
-#define bfin_write_CAN1_MB25_DATA3(val)		bfin_write16(CAN1_MB25_DATA3, val)
-#define bfin_read_CAN1_MB25_LENGTH()		bfin_read16(CAN1_MB25_LENGTH)
-#define bfin_write_CAN1_MB25_LENGTH(val)	bfin_write16(CAN1_MB25_LENGTH, val)
-#define bfin_read_CAN1_MB25_TIMESTAMP()		bfin_read16(CAN1_MB25_TIMESTAMP)
-#define bfin_write_CAN1_MB25_TIMESTAMP(val)	bfin_write16(CAN1_MB25_TIMESTAMP, val)
-#define bfin_read_CAN1_MB25_ID0()		bfin_read16(CAN1_MB25_ID0)
-#define bfin_write_CAN1_MB25_ID0(val)		bfin_write16(CAN1_MB25_ID0, val)
-#define bfin_read_CAN1_MB25_ID1()		bfin_read16(CAN1_MB25_ID1)
-#define bfin_write_CAN1_MB25_ID1(val)		bfin_write16(CAN1_MB25_ID1, val)
-#define bfin_read_CAN1_MB26_DATA0()		bfin_read16(CAN1_MB26_DATA0)
-#define bfin_write_CAN1_MB26_DATA0(val)		bfin_write16(CAN1_MB26_DATA0, val)
-#define bfin_read_CAN1_MB26_DATA1()		bfin_read16(CAN1_MB26_DATA1)
-#define bfin_write_CAN1_MB26_DATA1(val)		bfin_write16(CAN1_MB26_DATA1, val)
-#define bfin_read_CAN1_MB26_DATA2()		bfin_read16(CAN1_MB26_DATA2)
-#define bfin_write_CAN1_MB26_DATA2(val)		bfin_write16(CAN1_MB26_DATA2, val)
-#define bfin_read_CAN1_MB26_DATA3()		bfin_read16(CAN1_MB26_DATA3)
-#define bfin_write_CAN1_MB26_DATA3(val)		bfin_write16(CAN1_MB26_DATA3, val)
-#define bfin_read_CAN1_MB26_LENGTH()		bfin_read16(CAN1_MB26_LENGTH)
-#define bfin_write_CAN1_MB26_LENGTH(val)	bfin_write16(CAN1_MB26_LENGTH, val)
-#define bfin_read_CAN1_MB26_TIMESTAMP()		bfin_read16(CAN1_MB26_TIMESTAMP)
-#define bfin_write_CAN1_MB26_TIMESTAMP(val)	bfin_write16(CAN1_MB26_TIMESTAMP, val)
-#define bfin_read_CAN1_MB26_ID0()		bfin_read16(CAN1_MB26_ID0)
-#define bfin_write_CAN1_MB26_ID0(val)		bfin_write16(CAN1_MB26_ID0, val)
-#define bfin_read_CAN1_MB26_ID1()		bfin_read16(CAN1_MB26_ID1)
-#define bfin_write_CAN1_MB26_ID1(val)		bfin_write16(CAN1_MB26_ID1, val)
-#define bfin_read_CAN1_MB27_DATA0()		bfin_read16(CAN1_MB27_DATA0)
-#define bfin_write_CAN1_MB27_DATA0(val)		bfin_write16(CAN1_MB27_DATA0, val)
-#define bfin_read_CAN1_MB27_DATA1()		bfin_read16(CAN1_MB27_DATA1)
-#define bfin_write_CAN1_MB27_DATA1(val)		bfin_write16(CAN1_MB27_DATA1, val)
-#define bfin_read_CAN1_MB27_DATA2()		bfin_read16(CAN1_MB27_DATA2)
-#define bfin_write_CAN1_MB27_DATA2(val)		bfin_write16(CAN1_MB27_DATA2, val)
-#define bfin_read_CAN1_MB27_DATA3()		bfin_read16(CAN1_MB27_DATA3)
-#define bfin_write_CAN1_MB27_DATA3(val)		bfin_write16(CAN1_MB27_DATA3, val)
-#define bfin_read_CAN1_MB27_LENGTH()		bfin_read16(CAN1_MB27_LENGTH)
-#define bfin_write_CAN1_MB27_LENGTH(val)	bfin_write16(CAN1_MB27_LENGTH, val)
-#define bfin_read_CAN1_MB27_TIMESTAMP()		bfin_read16(CAN1_MB27_TIMESTAMP)
-#define bfin_write_CAN1_MB27_TIMESTAMP(val)	bfin_write16(CAN1_MB27_TIMESTAMP, val)
-#define bfin_read_CAN1_MB27_ID0()		bfin_read16(CAN1_MB27_ID0)
-#define bfin_write_CAN1_MB27_ID0(val)		bfin_write16(CAN1_MB27_ID0, val)
-#define bfin_read_CAN1_MB27_ID1()		bfin_read16(CAN1_MB27_ID1)
-#define bfin_write_CAN1_MB27_ID1(val)		bfin_write16(CAN1_MB27_ID1, val)
-#define bfin_read_CAN1_MB28_DATA0()		bfin_read16(CAN1_MB28_DATA0)
-#define bfin_write_CAN1_MB28_DATA0(val)		bfin_write16(CAN1_MB28_DATA0, val)
-#define bfin_read_CAN1_MB28_DATA1()		bfin_read16(CAN1_MB28_DATA1)
-#define bfin_write_CAN1_MB28_DATA1(val)		bfin_write16(CAN1_MB28_DATA1, val)
-#define bfin_read_CAN1_MB28_DATA2()		bfin_read16(CAN1_MB28_DATA2)
-#define bfin_write_CAN1_MB28_DATA2(val)		bfin_write16(CAN1_MB28_DATA2, val)
-#define bfin_read_CAN1_MB28_DATA3()		bfin_read16(CAN1_MB28_DATA3)
-#define bfin_write_CAN1_MB28_DATA3(val)		bfin_write16(CAN1_MB28_DATA3, val)
-#define bfin_read_CAN1_MB28_LENGTH()		bfin_read16(CAN1_MB28_LENGTH)
-#define bfin_write_CAN1_MB28_LENGTH(val)	bfin_write16(CAN1_MB28_LENGTH, val)
-#define bfin_read_CAN1_MB28_TIMESTAMP()		bfin_read16(CAN1_MB28_TIMESTAMP)
-#define bfin_write_CAN1_MB28_TIMESTAMP(val)	bfin_write16(CAN1_MB28_TIMESTAMP, val)
-#define bfin_read_CAN1_MB28_ID0()		bfin_read16(CAN1_MB28_ID0)
-#define bfin_write_CAN1_MB28_ID0(val)		bfin_write16(CAN1_MB28_ID0, val)
-#define bfin_read_CAN1_MB28_ID1()		bfin_read16(CAN1_MB28_ID1)
-#define bfin_write_CAN1_MB28_ID1(val)		bfin_write16(CAN1_MB28_ID1, val)
-#define bfin_read_CAN1_MB29_DATA0()		bfin_read16(CAN1_MB29_DATA0)
-#define bfin_write_CAN1_MB29_DATA0(val)		bfin_write16(CAN1_MB29_DATA0, val)
-#define bfin_read_CAN1_MB29_DATA1()		bfin_read16(CAN1_MB29_DATA1)
-#define bfin_write_CAN1_MB29_DATA1(val)		bfin_write16(CAN1_MB29_DATA1, val)
-#define bfin_read_CAN1_MB29_DATA2()		bfin_read16(CAN1_MB29_DATA2)
-#define bfin_write_CAN1_MB29_DATA2(val)		bfin_write16(CAN1_MB29_DATA2, val)
-#define bfin_read_CAN1_MB29_DATA3()		bfin_read16(CAN1_MB29_DATA3)
-#define bfin_write_CAN1_MB29_DATA3(val)		bfin_write16(CAN1_MB29_DATA3, val)
-#define bfin_read_CAN1_MB29_LENGTH()		bfin_read16(CAN1_MB29_LENGTH)
-#define bfin_write_CAN1_MB29_LENGTH(val)	bfin_write16(CAN1_MB29_LENGTH, val)
-#define bfin_read_CAN1_MB29_TIMESTAMP()		bfin_read16(CAN1_MB29_TIMESTAMP)
-#define bfin_write_CAN1_MB29_TIMESTAMP(val)	bfin_write16(CAN1_MB29_TIMESTAMP, val)
-#define bfin_read_CAN1_MB29_ID0()		bfin_read16(CAN1_MB29_ID0)
-#define bfin_write_CAN1_MB29_ID0(val)		bfin_write16(CAN1_MB29_ID0, val)
-#define bfin_read_CAN1_MB29_ID1()		bfin_read16(CAN1_MB29_ID1)
-#define bfin_write_CAN1_MB29_ID1(val)		bfin_write16(CAN1_MB29_ID1, val)
-#define bfin_read_CAN1_MB30_DATA0()		bfin_read16(CAN1_MB30_DATA0)
-#define bfin_write_CAN1_MB30_DATA0(val)		bfin_write16(CAN1_MB30_DATA0, val)
-#define bfin_read_CAN1_MB30_DATA1()		bfin_read16(CAN1_MB30_DATA1)
-#define bfin_write_CAN1_MB30_DATA1(val)		bfin_write16(CAN1_MB30_DATA1, val)
-#define bfin_read_CAN1_MB30_DATA2()		bfin_read16(CAN1_MB30_DATA2)
-#define bfin_write_CAN1_MB30_DATA2(val)		bfin_write16(CAN1_MB30_DATA2, val)
-#define bfin_read_CAN1_MB30_DATA3()		bfin_read16(CAN1_MB30_DATA3)
-#define bfin_write_CAN1_MB30_DATA3(val)		bfin_write16(CAN1_MB30_DATA3, val)
-#define bfin_read_CAN1_MB30_LENGTH()		bfin_read16(CAN1_MB30_LENGTH)
-#define bfin_write_CAN1_MB30_LENGTH(val)	bfin_write16(CAN1_MB30_LENGTH, val)
-#define bfin_read_CAN1_MB30_TIMESTAMP()		bfin_read16(CAN1_MB30_TIMESTAMP)
-#define bfin_write_CAN1_MB30_TIMESTAMP(val)	bfin_write16(CAN1_MB30_TIMESTAMP, val)
-#define bfin_read_CAN1_MB30_ID0()		bfin_read16(CAN1_MB30_ID0)
-#define bfin_write_CAN1_MB30_ID0(val)		bfin_write16(CAN1_MB30_ID0, val)
-#define bfin_read_CAN1_MB30_ID1()		bfin_read16(CAN1_MB30_ID1)
-#define bfin_write_CAN1_MB30_ID1(val)		bfin_write16(CAN1_MB30_ID1, val)
-#define bfin_read_CAN1_MB31_DATA0()		bfin_read16(CAN1_MB31_DATA0)
-#define bfin_write_CAN1_MB31_DATA0(val)		bfin_write16(CAN1_MB31_DATA0, val)
-#define bfin_read_CAN1_MB31_DATA1()		bfin_read16(CAN1_MB31_DATA1)
-#define bfin_write_CAN1_MB31_DATA1(val)		bfin_write16(CAN1_MB31_DATA1, val)
-#define bfin_read_CAN1_MB31_DATA2()		bfin_read16(CAN1_MB31_DATA2)
-#define bfin_write_CAN1_MB31_DATA2(val)		bfin_write16(CAN1_MB31_DATA2, val)
-#define bfin_read_CAN1_MB31_DATA3()		bfin_read16(CAN1_MB31_DATA3)
-#define bfin_write_CAN1_MB31_DATA3(val)		bfin_write16(CAN1_MB31_DATA3, val)
-#define bfin_read_CAN1_MB31_LENGTH()		bfin_read16(CAN1_MB31_LENGTH)
-#define bfin_write_CAN1_MB31_LENGTH(val)	bfin_write16(CAN1_MB31_LENGTH, val)
-#define bfin_read_CAN1_MB31_TIMESTAMP()		bfin_read16(CAN1_MB31_TIMESTAMP)
-#define bfin_write_CAN1_MB31_TIMESTAMP(val)	bfin_write16(CAN1_MB31_TIMESTAMP, val)
-#define bfin_read_CAN1_MB31_ID0()		bfin_read16(CAN1_MB31_ID0)
-#define bfin_write_CAN1_MB31_ID0(val)		bfin_write16(CAN1_MB31_ID0, val)
-#define bfin_read_CAN1_MB31_ID1()		bfin_read16(CAN1_MB31_ID1)
-#define bfin_write_CAN1_MB31_ID1(val)		bfin_write16(CAN1_MB31_ID1, val)
-
-/* ATAPI Registers */
-
-#define bfin_read_ATAPI_CONTROL()		bfin_read16(ATAPI_CONTROL)
-#define bfin_write_ATAPI_CONTROL(val)		bfin_write16(ATAPI_CONTROL, val)
-#define bfin_read_ATAPI_STATUS()		bfin_read16(ATAPI_STATUS)
-#define bfin_write_ATAPI_STATUS(val)		bfin_write16(ATAPI_STATUS, val)
-#define bfin_read_ATAPI_DEV_ADDR()		bfin_read16(ATAPI_DEV_ADDR)
-#define bfin_write_ATAPI_DEV_ADDR(val)		bfin_write16(ATAPI_DEV_ADDR, val)
-#define bfin_read_ATAPI_DEV_TXBUF()		bfin_read16(ATAPI_DEV_TXBUF)
-#define bfin_write_ATAPI_DEV_TXBUF(val)		bfin_write16(ATAPI_DEV_TXBUF, val)
-#define bfin_read_ATAPI_DEV_RXBUF()		bfin_read16(ATAPI_DEV_RXBUF)
-#define bfin_write_ATAPI_DEV_RXBUF(val)		bfin_write16(ATAPI_DEV_RXBUF, val)
-#define bfin_read_ATAPI_INT_MASK()		bfin_read16(ATAPI_INT_MASK)
-#define bfin_write_ATAPI_INT_MASK(val)		bfin_write16(ATAPI_INT_MASK, val)
-#define bfin_read_ATAPI_INT_STATUS()		bfin_read16(ATAPI_INT_STATUS)
-#define bfin_write_ATAPI_INT_STATUS(val)	bfin_write16(ATAPI_INT_STATUS, val)
-#define bfin_read_ATAPI_XFER_LEN()		bfin_read16(ATAPI_XFER_LEN)
-#define bfin_write_ATAPI_XFER_LEN(val)		bfin_write16(ATAPI_XFER_LEN, val)
-#define bfin_read_ATAPI_LINE_STATUS()		bfin_read16(ATAPI_LINE_STATUS)
-#define bfin_write_ATAPI_LINE_STATUS(val)	bfin_write16(ATAPI_LINE_STATUS, val)
-#define bfin_read_ATAPI_SM_STATE()		bfin_read16(ATAPI_SM_STATE)
-#define bfin_write_ATAPI_SM_STATE(val)		bfin_write16(ATAPI_SM_STATE, val)
-#define bfin_read_ATAPI_TERMINATE()		bfin_read16(ATAPI_TERMINATE)
-#define bfin_write_ATAPI_TERMINATE(val)		bfin_write16(ATAPI_TERMINATE, val)
-#define bfin_read_ATAPI_PIO_TFRCNT()		bfin_read16(ATAPI_PIO_TFRCNT)
-#define bfin_write_ATAPI_PIO_TFRCNT(val)	bfin_write16(ATAPI_PIO_TFRCNT, val)
-#define bfin_read_ATAPI_DMA_TFRCNT()		bfin_read16(ATAPI_DMA_TFRCNT)
-#define bfin_write_ATAPI_DMA_TFRCNT(val)	bfin_write16(ATAPI_DMA_TFRCNT, val)
-#define bfin_read_ATAPI_UMAIN_TFRCNT()		bfin_read16(ATAPI_UMAIN_TFRCNT)
-#define bfin_write_ATAPI_UMAIN_TFRCNT(val)	bfin_write16(ATAPI_UMAIN_TFRCNT, val)
-#define bfin_read_ATAPI_UDMAOUT_TFRCNT()	bfin_read16(ATAPI_UDMAOUT_TFRCNT)
-#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val)	bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
-#define bfin_read_ATAPI_REG_TIM_0()		bfin_read16(ATAPI_REG_TIM_0)
-#define bfin_write_ATAPI_REG_TIM_0(val)		bfin_write16(ATAPI_REG_TIM_0, val)
-#define bfin_read_ATAPI_PIO_TIM_0()		bfin_read16(ATAPI_PIO_TIM_0)
-#define bfin_write_ATAPI_PIO_TIM_0(val)		bfin_write16(ATAPI_PIO_TIM_0, val)
-#define bfin_read_ATAPI_PIO_TIM_1()		bfin_read16(ATAPI_PIO_TIM_1)
-#define bfin_write_ATAPI_PIO_TIM_1(val)		bfin_write16(ATAPI_PIO_TIM_1, val)
-#define bfin_read_ATAPI_MULTI_TIM_0()		bfin_read16(ATAPI_MULTI_TIM_0)
-#define bfin_write_ATAPI_MULTI_TIM_0(val)	bfin_write16(ATAPI_MULTI_TIM_0, val)
-#define bfin_read_ATAPI_MULTI_TIM_1()		bfin_read16(ATAPI_MULTI_TIM_1)
-#define bfin_write_ATAPI_MULTI_TIM_1(val)	bfin_write16(ATAPI_MULTI_TIM_1, val)
-#define bfin_read_ATAPI_MULTI_TIM_2()		bfin_read16(ATAPI_MULTI_TIM_2)
-#define bfin_write_ATAPI_MULTI_TIM_2(val)	bfin_write16(ATAPI_MULTI_TIM_2, val)
-#define bfin_read_ATAPI_ULTRA_TIM_0()		bfin_read16(ATAPI_ULTRA_TIM_0)
-#define bfin_write_ATAPI_ULTRA_TIM_0(val)	bfin_write16(ATAPI_ULTRA_TIM_0, val)
-#define bfin_read_ATAPI_ULTRA_TIM_1()		bfin_read16(ATAPI_ULTRA_TIM_1)
-#define bfin_write_ATAPI_ULTRA_TIM_1(val)	bfin_write16(ATAPI_ULTRA_TIM_1, val)
-#define bfin_read_ATAPI_ULTRA_TIM_2()		bfin_read16(ATAPI_ULTRA_TIM_2)
-#define bfin_write_ATAPI_ULTRA_TIM_2(val)	bfin_write16(ATAPI_ULTRA_TIM_2, val)
-#define bfin_read_ATAPI_ULTRA_TIM_3()		bfin_read16(ATAPI_ULTRA_TIM_3)
-#define bfin_write_ATAPI_ULTRA_TIM_3(val)	bfin_write16(ATAPI_ULTRA_TIM_3, val)
-
-/* SDH Registers */
-
-#define bfin_read_SDH_PWR_CTL()		bfin_read16(SDH_PWR_CTL)
-#define bfin_write_SDH_PWR_CTL(val)	bfin_write16(SDH_PWR_CTL, val)
-#define bfin_read_SDH_CLK_CTL()		bfin_read16(SDH_CLK_CTL)
-#define bfin_write_SDH_CLK_CTL(val)	bfin_write16(SDH_CLK_CTL, val)
-#define bfin_read_SDH_ARGUMENT()	bfin_read32(SDH_ARGUMENT)
-#define bfin_write_SDH_ARGUMENT(val)	bfin_write32(SDH_ARGUMENT, val)
-#define bfin_read_SDH_COMMAND()		bfin_read16(SDH_COMMAND)
-#define bfin_write_SDH_COMMAND(val)	bfin_write16(SDH_COMMAND, val)
-#define bfin_read_SDH_RESP_CMD()	bfin_read16(SDH_RESP_CMD)
-#define bfin_write_SDH_RESP_CMD(val)	bfin_write16(SDH_RESP_CMD, val)
-#define bfin_read_SDH_RESPONSE0()	bfin_read32(SDH_RESPONSE0)
-#define bfin_write_SDH_RESPONSE0(val)	bfin_write32(SDH_RESPONSE0, val)
-#define bfin_read_SDH_RESPONSE1()	bfin_read32(SDH_RESPONSE1)
-#define bfin_write_SDH_RESPONSE1(val)	bfin_write32(SDH_RESPONSE1, val)
-#define bfin_read_SDH_RESPONSE2()	bfin_read32(SDH_RESPONSE2)
-#define bfin_write_SDH_RESPONSE2(val)	bfin_write32(SDH_RESPONSE2, val)
-#define bfin_read_SDH_RESPONSE3()	bfin_read32(SDH_RESPONSE3)
-#define bfin_write_SDH_RESPONSE3(val)	bfin_write32(SDH_RESPONSE3, val)
-#define bfin_read_SDH_DATA_TIMER()	bfin_read32(SDH_DATA_TIMER)
-#define bfin_write_SDH_DATA_TIMER(val)	bfin_write32(SDH_DATA_TIMER, val)
-#define bfin_read_SDH_DATA_LGTH()	bfin_read16(SDH_DATA_LGTH)
-#define bfin_write_SDH_DATA_LGTH(val)	bfin_write16(SDH_DATA_LGTH, val)
-#define bfin_read_SDH_DATA_CTL()	bfin_read16(SDH_DATA_CTL)
-#define bfin_write_SDH_DATA_CTL(val)	bfin_write16(SDH_DATA_CTL, val)
-#define bfin_read_SDH_DATA_CNT()	bfin_read16(SDH_DATA_CNT)
-#define bfin_write_SDH_DATA_CNT(val)	bfin_write16(SDH_DATA_CNT, val)
-#define bfin_read_SDH_STATUS()		bfin_read32(SDH_STATUS)
-#define bfin_write_SDH_STATUS(val)	bfin_write32(SDH_STATUS, val)
-#define bfin_read_SDH_STATUS_CLR()	bfin_read16(SDH_STATUS_CLR)
-#define bfin_write_SDH_STATUS_CLR(val)	bfin_write16(SDH_STATUS_CLR, val)
-#define bfin_read_SDH_MASK0()		bfin_read32(SDH_MASK0)
-#define bfin_write_SDH_MASK0(val)	bfin_write32(SDH_MASK0, val)
-#define bfin_read_SDH_MASK1()		bfin_read32(SDH_MASK1)
-#define bfin_write_SDH_MASK1(val)	bfin_write32(SDH_MASK1, val)
-#define bfin_read_SDH_FIFO_CNT()	bfin_read16(SDH_FIFO_CNT)
-#define bfin_write_SDH_FIFO_CNT(val)	bfin_write16(SDH_FIFO_CNT, val)
-#define bfin_read_SDH_FIFO()		bfin_read32(SDH_FIFO)
-#define bfin_write_SDH_FIFO(val)	bfin_write32(SDH_FIFO, val)
-#define bfin_read_SDH_E_STATUS()	bfin_read16(SDH_E_STATUS)
-#define bfin_write_SDH_E_STATUS(val)	bfin_write16(SDH_E_STATUS, val)
-#define bfin_read_SDH_E_MASK()		bfin_read16(SDH_E_MASK)
-#define bfin_write_SDH_E_MASK(val)	bfin_write16(SDH_E_MASK, val)
-#define bfin_read_SDH_CFG()		bfin_read16(SDH_CFG)
-#define bfin_write_SDH_CFG(val)		bfin_write16(SDH_CFG, val)
-#define bfin_read_SDH_RD_WAIT_EN()	bfin_read16(SDH_RD_WAIT_EN)
-#define bfin_write_SDH_RD_WAIT_EN(val)	bfin_write16(SDH_RD_WAIT_EN, val)
-#define bfin_read_SDH_PID0()		bfin_read16(SDH_PID0)
-#define bfin_write_SDH_PID0(val)	bfin_write16(SDH_PID0, val)
-#define bfin_read_SDH_PID1()		bfin_read16(SDH_PID1)
-#define bfin_write_SDH_PID1(val)	bfin_write16(SDH_PID1, val)
-#define bfin_read_SDH_PID2()		bfin_read16(SDH_PID2)
-#define bfin_write_SDH_PID2(val)	bfin_write16(SDH_PID2, val)
-#define bfin_read_SDH_PID3()		bfin_read16(SDH_PID3)
-#define bfin_write_SDH_PID3(val)	bfin_write16(SDH_PID3, val)
-#define bfin_read_SDH_PID4()		bfin_read16(SDH_PID4)
-#define bfin_write_SDH_PID4(val)	bfin_write16(SDH_PID4, val)
-#define bfin_read_SDH_PID5()		bfin_read16(SDH_PID5)
-#define bfin_write_SDH_PID5(val)	bfin_write16(SDH_PID5, val)
-#define bfin_read_SDH_PID6()		bfin_read16(SDH_PID6)
-#define bfin_write_SDH_PID6(val)	bfin_write16(SDH_PID6, val)
-#define bfin_read_SDH_PID7()		bfin_read16(SDH_PID7)
-#define bfin_write_SDH_PID7(val)	bfin_write16(SDH_PID7, val)
-
-/* HOST Port Registers */
-
-#define bfin_read_HOST_CONTROL()	bfin_read16(HOST_CONTROL)
-#define bfin_write_HOST_CONTROL(val)	bfin_write16(HOST_CONTROL, val)
-#define bfin_read_HOST_STATUS()		bfin_read16(HOST_STATUS)
-#define bfin_write_HOST_STATUS(val)	bfin_write16(HOST_STATUS, val)
-#define bfin_read_HOST_TIMEOUT()	bfin_read16(HOST_TIMEOUT)
-#define bfin_write_HOST_TIMEOUT(val)	bfin_write16(HOST_TIMEOUT, val)
-
-/* USB Control Registers */
-
-#define bfin_read_USB_FADDR()		bfin_read16(USB_FADDR)
-#define bfin_write_USB_FADDR(val)	bfin_write16(USB_FADDR, val)
-#define bfin_read_USB_POWER()		bfin_read16(USB_POWER)
-#define bfin_write_USB_POWER(val)	bfin_write16(USB_POWER, val)
-#define bfin_read_USB_INTRTX()		bfin_read16(USB_INTRTX)
-#define bfin_write_USB_INTRTX(val)	bfin_write16(USB_INTRTX, val)
-#define bfin_read_USB_INTRRX()		bfin_read16(USB_INTRRX)
-#define bfin_write_USB_INTRRX(val)	bfin_write16(USB_INTRRX, val)
-#define bfin_read_USB_INTRTXE()		bfin_read16(USB_INTRTXE)
-#define bfin_write_USB_INTRTXE(val)	bfin_write16(USB_INTRTXE, val)
-#define bfin_read_USB_INTRRXE()		bfin_read16(USB_INTRRXE)
-#define bfin_write_USB_INTRRXE(val)	bfin_write16(USB_INTRRXE, val)
-#define bfin_read_USB_INTRUSB()		bfin_read16(USB_INTRUSB)
-#define bfin_write_USB_INTRUSB(val)	bfin_write16(USB_INTRUSB, val)
-#define bfin_read_USB_INTRUSBE()	bfin_read16(USB_INTRUSBE)
-#define bfin_write_USB_INTRUSBE(val)	bfin_write16(USB_INTRUSBE, val)
-#define bfin_read_USB_FRAME()		bfin_read16(USB_FRAME)
-#define bfin_write_USB_FRAME(val)	bfin_write16(USB_FRAME, val)
-#define bfin_read_USB_INDEX()		bfin_read16(USB_INDEX)
-#define bfin_write_USB_INDEX(val)	bfin_write16(USB_INDEX, val)
-#define bfin_read_USB_TESTMODE()	bfin_read16(USB_TESTMODE)
-#define bfin_write_USB_TESTMODE(val)	bfin_write16(USB_TESTMODE, val)
-#define bfin_read_USB_GLOBINTR()	bfin_read16(USB_GLOBINTR)
-#define bfin_write_USB_GLOBINTR(val)	bfin_write16(USB_GLOBINTR, val)
-#define bfin_read_USB_GLOBAL_CTL()	bfin_read16(USB_GLOBAL_CTL)
-#define bfin_write_USB_GLOBAL_CTL(val)	bfin_write16(USB_GLOBAL_CTL, val)
-
-/* USB Packet Control Registers */
-
-#define bfin_read_USB_TX_MAX_PACKET()		bfin_read16(USB_TX_MAX_PACKET)
-#define bfin_write_USB_TX_MAX_PACKET(val)	bfin_write16(USB_TX_MAX_PACKET, val)
-#define bfin_read_USB_CSR0()			bfin_read16(USB_CSR0)
-#define bfin_write_USB_CSR0(val)		bfin_write16(USB_CSR0, val)
-#define bfin_read_USB_TXCSR()			bfin_read16(USB_TXCSR)
-#define bfin_write_USB_TXCSR(val)		bfin_write16(USB_TXCSR, val)
-#define bfin_read_USB_RX_MAX_PACKET()		bfin_read16(USB_RX_MAX_PACKET)
-#define bfin_write_USB_RX_MAX_PACKET(val)	bfin_write16(USB_RX_MAX_PACKET, val)
-#define bfin_read_USB_RXCSR()			bfin_read16(USB_RXCSR)
-#define bfin_write_USB_RXCSR(val)		bfin_write16(USB_RXCSR, val)
-#define bfin_read_USB_COUNT0()			bfin_read16(USB_COUNT0)
-#define bfin_write_USB_COUNT0(val)		bfin_write16(USB_COUNT0, val)
-#define bfin_read_USB_RXCOUNT()			bfin_read16(USB_RXCOUNT)
-#define bfin_write_USB_RXCOUNT(val)		bfin_write16(USB_RXCOUNT, val)
-#define bfin_read_USB_TXTYPE()			bfin_read16(USB_TXTYPE)
-#define bfin_write_USB_TXTYPE(val)		bfin_write16(USB_TXTYPE, val)
-#define bfin_read_USB_NAKLIMIT0()		bfin_read16(USB_NAKLIMIT0)
-#define bfin_write_USB_NAKLIMIT0(val)		bfin_write16(USB_NAKLIMIT0, val)
-#define bfin_read_USB_TXINTERVAL()		bfin_read16(USB_TXINTERVAL)
-#define bfin_write_USB_TXINTERVAL(val)		bfin_write16(USB_TXINTERVAL, val)
-#define bfin_read_USB_RXTYPE()			bfin_read16(USB_RXTYPE)
-#define bfin_write_USB_RXTYPE(val)		bfin_write16(USB_RXTYPE, val)
-#define bfin_read_USB_RXINTERVAL()		bfin_read16(USB_RXINTERVAL)
-#define bfin_write_USB_RXINTERVAL(val)		bfin_write16(USB_RXINTERVAL, val)
-#define bfin_read_USB_TXCOUNT()			bfin_read16(USB_TXCOUNT)
-#define bfin_write_USB_TXCOUNT(val)		bfin_write16(USB_TXCOUNT, val)
-
-/* USB Endbfin_read_()oint FIFO Registers */
-
-#define bfin_read_USB_EP0_FIFO()		bfin_read16(USB_EP0_FIFO)
-#define bfin_write_USB_EP0_FIFO(val)		bfin_write16(USB_EP0_FIFO, val)
-#define bfin_read_USB_EP1_FIFO()		bfin_read16(USB_EP1_FIFO)
-#define bfin_write_USB_EP1_FIFO(val)		bfin_write16(USB_EP1_FIFO, val)
-#define bfin_read_USB_EP2_FIFO()		bfin_read16(USB_EP2_FIFO)
-#define bfin_write_USB_EP2_FIFO(val)		bfin_write16(USB_EP2_FIFO, val)
-#define bfin_read_USB_EP3_FIFO()		bfin_read16(USB_EP3_FIFO)
-#define bfin_write_USB_EP3_FIFO(val)		bfin_write16(USB_EP3_FIFO, val)
-#define bfin_read_USB_EP4_FIFO()		bfin_read16(USB_EP4_FIFO)
-#define bfin_write_USB_EP4_FIFO(val)		bfin_write16(USB_EP4_FIFO, val)
-#define bfin_read_USB_EP5_FIFO()		bfin_read16(USB_EP5_FIFO)
-#define bfin_write_USB_EP5_FIFO(val)		bfin_write16(USB_EP5_FIFO, val)
-#define bfin_read_USB_EP6_FIFO()		bfin_read16(USB_EP6_FIFO)
-#define bfin_write_USB_EP6_FIFO(val)		bfin_write16(USB_EP6_FIFO, val)
-#define bfin_read_USB_EP7_FIFO()		bfin_read16(USB_EP7_FIFO)
-#define bfin_write_USB_EP7_FIFO(val)		bfin_write16(USB_EP7_FIFO, val)
-
-/* USB OTG Control Registers */
-
-#define bfin_read_USB_OTG_DEV_CTL()		bfin_read16(USB_OTG_DEV_CTL)
-#define bfin_write_USB_OTG_DEV_CTL(val)		bfin_write16(USB_OTG_DEV_CTL, val)
-#define bfin_read_USB_OTG_VBUS_IRQ()		bfin_read16(USB_OTG_VBUS_IRQ)
-#define bfin_write_USB_OTG_VBUS_IRQ(val)	bfin_write16(USB_OTG_VBUS_IRQ, val)
-#define bfin_read_USB_OTG_VBUS_MASK()		bfin_read16(USB_OTG_VBUS_MASK)
-#define bfin_write_USB_OTG_VBUS_MASK(val)	bfin_write16(USB_OTG_VBUS_MASK, val)
-
-/* USB Phy Control Registers */
-
-#define bfin_read_USB_LINKINFO()		bfin_read16(USB_LINKINFO)
-#define bfin_write_USB_LINKINFO(val)		bfin_write16(USB_LINKINFO, val)
-#define bfin_read_USB_VPLEN()			bfin_read16(USB_VPLEN)
-#define bfin_write_USB_VPLEN(val)		bfin_write16(USB_VPLEN, val)
-#define bfin_read_USB_HS_EOF1()			bfin_read16(USB_HS_EOF1)
-#define bfin_write_USB_HS_EOF1(val)		bfin_write16(USB_HS_EOF1, val)
-#define bfin_read_USB_FS_EOF1()			bfin_read16(USB_FS_EOF1)
-#define bfin_write_USB_FS_EOF1(val)		bfin_write16(USB_FS_EOF1, val)
-#define bfin_read_USB_LS_EOF1()			bfin_read16(USB_LS_EOF1)
-#define bfin_write_USB_LS_EOF1(val)		bfin_write16(USB_LS_EOF1, val)
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CNTRL()		bfin_read16(USB_APHY_CNTRL)
-#define bfin_write_USB_APHY_CNTRL(val)		bfin_write16(USB_APHY_CNTRL, val)
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CALIB()		bfin_read16(USB_APHY_CALIB)
-#define bfin_write_USB_APHY_CALIB(val)		bfin_write16(USB_APHY_CALIB, val)
-#define bfin_read_USB_APHY_CNTRL2()		bfin_read16(USB_APHY_CNTRL2)
-#define bfin_write_USB_APHY_CNTRL2(val)		bfin_write16(USB_APHY_CNTRL2, val)
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define bfin_read_USB_PHY_TEST()		bfin_read16(USB_PHY_TEST)
-#define bfin_write_USB_PHY_TEST(val)		bfin_write16(USB_PHY_TEST, val)
-#define bfin_read_USB_PLLOSC_CTRL()		bfin_read16(USB_PLLOSC_CTRL)
-#define bfin_write_USB_PLLOSC_CTRL(val)		bfin_write16(USB_PLLOSC_CTRL, val)
-#define bfin_read_USB_SRP_CLKDIV()		bfin_read16(USB_SRP_CLKDIV)
-#define bfin_write_USB_SRP_CLKDIV(val)		bfin_write16(USB_SRP_CLKDIV, val)
-
-/* USB Endbfin_read_()oint 0 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXMAXP()		bfin_read16(USB_EP_NI0_TXMAXP)
-#define bfin_write_USB_EP_NI0_TXMAXP(val)	bfin_write16(USB_EP_NI0_TXMAXP, val)
-#define bfin_read_USB_EP_NI0_TXCSR()		bfin_read16(USB_EP_NI0_TXCSR)
-#define bfin_write_USB_EP_NI0_TXCSR(val)	bfin_write16(USB_EP_NI0_TXCSR, val)
-#define bfin_read_USB_EP_NI0_RXMAXP()		bfin_read16(USB_EP_NI0_RXMAXP)
-#define bfin_write_USB_EP_NI0_RXMAXP(val)	bfin_write16(USB_EP_NI0_RXMAXP, val)
-#define bfin_read_USB_EP_NI0_RXCSR()		bfin_read16(USB_EP_NI0_RXCSR)
-#define bfin_write_USB_EP_NI0_RXCSR(val)	bfin_write16(USB_EP_NI0_RXCSR, val)
-#define bfin_read_USB_EP_NI0_RXCOUNT()		bfin_read16(USB_EP_NI0_RXCOUNT)
-#define bfin_write_USB_EP_NI0_RXCOUNT(val)	bfin_write16(USB_EP_NI0_RXCOUNT, val)
-#define bfin_read_USB_EP_NI0_TXTYPE()		bfin_read16(USB_EP_NI0_TXTYPE)
-#define bfin_write_USB_EP_NI0_TXTYPE(val)	bfin_write16(USB_EP_NI0_TXTYPE, val)
-#define bfin_read_USB_EP_NI0_TXINTERVAL()	bfin_read16(USB_EP_NI0_TXINTERVAL)
-#define bfin_write_USB_EP_NI0_TXINTERVAL(val)	bfin_write16(USB_EP_NI0_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_RXTYPE()		bfin_read16(USB_EP_NI0_RXTYPE)
-#define bfin_write_USB_EP_NI0_RXTYPE(val)	bfin_write16(USB_EP_NI0_RXTYPE, val)
-#define bfin_read_USB_EP_NI0_RXINTERVAL()	bfin_read16(USB_EP_NI0_RXINTERVAL)
-#define bfin_write_USB_EP_NI0_RXINTERVAL(val)	bfin_write16(USB_EP_NI0_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 1 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXCOUNT()		bfin_read16(USB_EP_NI0_TXCOUNT)
-#define bfin_write_USB_EP_NI0_TXCOUNT(val)	bfin_write16(USB_EP_NI0_TXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXMAXP()		bfin_read16(USB_EP_NI1_TXMAXP)
-#define bfin_write_USB_EP_NI1_TXMAXP(val)	bfin_write16(USB_EP_NI1_TXMAXP, val)
-#define bfin_read_USB_EP_NI1_TXCSR()		bfin_read16(USB_EP_NI1_TXCSR)
-#define bfin_write_USB_EP_NI1_TXCSR(val)	bfin_write16(USB_EP_NI1_TXCSR, val)
-#define bfin_read_USB_EP_NI1_RXMAXP()		bfin_read16(USB_EP_NI1_RXMAXP)
-#define bfin_write_USB_EP_NI1_RXMAXP(val)	bfin_write16(USB_EP_NI1_RXMAXP, val)
-#define bfin_read_USB_EP_NI1_RXCSR()		bfin_read16(USB_EP_NI1_RXCSR)
-#define bfin_write_USB_EP_NI1_RXCSR(val)	bfin_write16(USB_EP_NI1_RXCSR, val)
-#define bfin_read_USB_EP_NI1_RXCOUNT()		bfin_read16(USB_EP_NI1_RXCOUNT)
-#define bfin_write_USB_EP_NI1_RXCOUNT(val)	bfin_write16(USB_EP_NI1_RXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXTYPE()		bfin_read16(USB_EP_NI1_TXTYPE)
-#define bfin_write_USB_EP_NI1_TXTYPE(val)	bfin_write16(USB_EP_NI1_TXTYPE, val)
-#define bfin_read_USB_EP_NI1_TXINTERVAL()	bfin_read16(USB_EP_NI1_TXINTERVAL)
-#define bfin_write_USB_EP_NI1_TXINTERVAL(val)	bfin_write16(USB_EP_NI1_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_RXTYPE()		bfin_read16(USB_EP_NI1_RXTYPE)
-#define bfin_write_USB_EP_NI1_RXTYPE(val)	bfin_write16(USB_EP_NI1_RXTYPE, val)
-#define bfin_read_USB_EP_NI1_RXINTERVAL()	bfin_read16(USB_EP_NI1_RXINTERVAL)
-#define bfin_write_USB_EP_NI1_RXINTERVAL(val)	bfin_write16(USB_EP_NI1_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 2 Control Registers */
-
-#define bfin_read_USB_EP_NI1_TXCOUNT()		bfin_read16(USB_EP_NI1_TXCOUNT)
-#define bfin_write_USB_EP_NI1_TXCOUNT(val)	bfin_write16(USB_EP_NI1_TXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXMAXP()		bfin_read16(USB_EP_NI2_TXMAXP)
-#define bfin_write_USB_EP_NI2_TXMAXP(val)	bfin_write16(USB_EP_NI2_TXMAXP, val)
-#define bfin_read_USB_EP_NI2_TXCSR()		bfin_read16(USB_EP_NI2_TXCSR)
-#define bfin_write_USB_EP_NI2_TXCSR(val)	bfin_write16(USB_EP_NI2_TXCSR, val)
-#define bfin_read_USB_EP_NI2_RXMAXP()		bfin_read16(USB_EP_NI2_RXMAXP)
-#define bfin_write_USB_EP_NI2_RXMAXP(val)	bfin_write16(USB_EP_NI2_RXMAXP, val)
-#define bfin_read_USB_EP_NI2_RXCSR()		bfin_read16(USB_EP_NI2_RXCSR)
-#define bfin_write_USB_EP_NI2_RXCSR(val)	bfin_write16(USB_EP_NI2_RXCSR, val)
-#define bfin_read_USB_EP_NI2_RXCOUNT()		bfin_read16(USB_EP_NI2_RXCOUNT)
-#define bfin_write_USB_EP_NI2_RXCOUNT(val)	bfin_write16(USB_EP_NI2_RXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXTYPE()		bfin_read16(USB_EP_NI2_TXTYPE)
-#define bfin_write_USB_EP_NI2_TXTYPE(val)	bfin_write16(USB_EP_NI2_TXTYPE, val)
-#define bfin_read_USB_EP_NI2_TXINTERVAL()	bfin_read16(USB_EP_NI2_TXINTERVAL)
-#define bfin_write_USB_EP_NI2_TXINTERVAL(val)	bfin_write16(USB_EP_NI2_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_RXTYPE()		bfin_read16(USB_EP_NI2_RXTYPE)
-#define bfin_write_USB_EP_NI2_RXTYPE(val)	bfin_write16(USB_EP_NI2_RXTYPE, val)
-#define bfin_read_USB_EP_NI2_RXINTERVAL()	bfin_read16(USB_EP_NI2_RXINTERVAL)
-#define bfin_write_USB_EP_NI2_RXINTERVAL(val)	bfin_write16(USB_EP_NI2_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 3 Control Registers */
-
-#define bfin_read_USB_EP_NI2_TXCOUNT()		bfin_read16(USB_EP_NI2_TXCOUNT)
-#define bfin_write_USB_EP_NI2_TXCOUNT(val)	bfin_write16(USB_EP_NI2_TXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXMAXP()		bfin_read16(USB_EP_NI3_TXMAXP)
-#define bfin_write_USB_EP_NI3_TXMAXP(val)	bfin_write16(USB_EP_NI3_TXMAXP, val)
-#define bfin_read_USB_EP_NI3_TXCSR()		bfin_read16(USB_EP_NI3_TXCSR)
-#define bfin_write_USB_EP_NI3_TXCSR(val)	bfin_write16(USB_EP_NI3_TXCSR, val)
-#define bfin_read_USB_EP_NI3_RXMAXP()		bfin_read16(USB_EP_NI3_RXMAXP)
-#define bfin_write_USB_EP_NI3_RXMAXP(val)	bfin_write16(USB_EP_NI3_RXMAXP, val)
-#define bfin_read_USB_EP_NI3_RXCSR()		bfin_read16(USB_EP_NI3_RXCSR)
-#define bfin_write_USB_EP_NI3_RXCSR(val)	bfin_write16(USB_EP_NI3_RXCSR, val)
-#define bfin_read_USB_EP_NI3_RXCOUNT()		bfin_read16(USB_EP_NI3_RXCOUNT)
-#define bfin_write_USB_EP_NI3_RXCOUNT(val)	bfin_write16(USB_EP_NI3_RXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXTYPE()		bfin_read16(USB_EP_NI3_TXTYPE)
-#define bfin_write_USB_EP_NI3_TXTYPE(val)	bfin_write16(USB_EP_NI3_TXTYPE, val)
-#define bfin_read_USB_EP_NI3_TXINTERVAL()	bfin_read16(USB_EP_NI3_TXINTERVAL)
-#define bfin_write_USB_EP_NI3_TXINTERVAL(val)	bfin_write16(USB_EP_NI3_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_RXTYPE()		bfin_read16(USB_EP_NI3_RXTYPE)
-#define bfin_write_USB_EP_NI3_RXTYPE(val)	bfin_write16(USB_EP_NI3_RXTYPE, val)
-#define bfin_read_USB_EP_NI3_RXINTERVAL()	bfin_read16(USB_EP_NI3_RXINTERVAL)
-#define bfin_write_USB_EP_NI3_RXINTERVAL(val)	bfin_write16(USB_EP_NI3_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 4 Control Registers */
-
-#define bfin_read_USB_EP_NI3_TXCOUNT()		bfin_read16(USB_EP_NI3_TXCOUNT)
-#define bfin_write_USB_EP_NI3_TXCOUNT(val)	bfin_write16(USB_EP_NI3_TXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXMAXP()		bfin_read16(USB_EP_NI4_TXMAXP)
-#define bfin_write_USB_EP_NI4_TXMAXP(val)	bfin_write16(USB_EP_NI4_TXMAXP, val)
-#define bfin_read_USB_EP_NI4_TXCSR()		bfin_read16(USB_EP_NI4_TXCSR)
-#define bfin_write_USB_EP_NI4_TXCSR(val)	bfin_write16(USB_EP_NI4_TXCSR, val)
-#define bfin_read_USB_EP_NI4_RXMAXP()		bfin_read16(USB_EP_NI4_RXMAXP)
-#define bfin_write_USB_EP_NI4_RXMAXP(val)	bfin_write16(USB_EP_NI4_RXMAXP, val)
-#define bfin_read_USB_EP_NI4_RXCSR()		bfin_read16(USB_EP_NI4_RXCSR)
-#define bfin_write_USB_EP_NI4_RXCSR(val)	bfin_write16(USB_EP_NI4_RXCSR, val)
-#define bfin_read_USB_EP_NI4_RXCOUNT()		bfin_read16(USB_EP_NI4_RXCOUNT)
-#define bfin_write_USB_EP_NI4_RXCOUNT(val)	bfin_write16(USB_EP_NI4_RXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXTYPE()		bfin_read16(USB_EP_NI4_TXTYPE)
-#define bfin_write_USB_EP_NI4_TXTYPE(val)	bfin_write16(USB_EP_NI4_TXTYPE, val)
-#define bfin_read_USB_EP_NI4_TXINTERVAL()	bfin_read16(USB_EP_NI4_TXINTERVAL)
-#define bfin_write_USB_EP_NI4_TXINTERVAL(val)	bfin_write16(USB_EP_NI4_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_RXTYPE()		bfin_read16(USB_EP_NI4_RXTYPE)
-#define bfin_write_USB_EP_NI4_RXTYPE(val)	bfin_write16(USB_EP_NI4_RXTYPE, val)
-#define bfin_read_USB_EP_NI4_RXINTERVAL()	bfin_read16(USB_EP_NI4_RXINTERVAL)
-#define bfin_write_USB_EP_NI4_RXINTERVAL(val)	bfin_write16(USB_EP_NI4_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 5 Control Registers */
-
-#define bfin_read_USB_EP_NI4_TXCOUNT()		bfin_read16(USB_EP_NI4_TXCOUNT)
-#define bfin_write_USB_EP_NI4_TXCOUNT(val)	bfin_write16(USB_EP_NI4_TXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXMAXP()		bfin_read16(USB_EP_NI5_TXMAXP)
-#define bfin_write_USB_EP_NI5_TXMAXP(val)	bfin_write16(USB_EP_NI5_TXMAXP, val)
-#define bfin_read_USB_EP_NI5_TXCSR()		bfin_read16(USB_EP_NI5_TXCSR)
-#define bfin_write_USB_EP_NI5_TXCSR(val)	bfin_write16(USB_EP_NI5_TXCSR, val)
-#define bfin_read_USB_EP_NI5_RXMAXP()		bfin_read16(USB_EP_NI5_RXMAXP)
-#define bfin_write_USB_EP_NI5_RXMAXP(val)	bfin_write16(USB_EP_NI5_RXMAXP, val)
-#define bfin_read_USB_EP_NI5_RXCSR()		bfin_read16(USB_EP_NI5_RXCSR)
-#define bfin_write_USB_EP_NI5_RXCSR(val)	bfin_write16(USB_EP_NI5_RXCSR, val)
-#define bfin_read_USB_EP_NI5_RXCOUNT()		bfin_read16(USB_EP_NI5_RXCOUNT)
-#define bfin_write_USB_EP_NI5_RXCOUNT(val)	bfin_write16(USB_EP_NI5_RXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXTYPE()		bfin_read16(USB_EP_NI5_TXTYPE)
-#define bfin_write_USB_EP_NI5_TXTYPE(val)	bfin_write16(USB_EP_NI5_TXTYPE, val)
-#define bfin_read_USB_EP_NI5_TXINTERVAL()	bfin_read16(USB_EP_NI5_TXINTERVAL)
-#define bfin_write_USB_EP_NI5_TXINTERVAL(val)	bfin_write16(USB_EP_NI5_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_RXTYPE()		bfin_read16(USB_EP_NI5_RXTYPE)
-#define bfin_write_USB_EP_NI5_RXTYPE(val)	bfin_write16(USB_EP_NI5_RXTYPE, val)
-#define bfin_read_USB_EP_NI5_RXINTERVAL()	bfin_read16(USB_EP_NI5_RXINTERVAL)
-#define bfin_write_USB_EP_NI5_RXINTERVAL(val)	bfin_write16(USB_EP_NI5_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 6 Control Registers */
-
-#define bfin_read_USB_EP_NI5_TXCOUNT()		bfin_read16(USB_EP_NI5_TXCOUNT)
-#define bfin_write_USB_EP_NI5_TXCOUNT(val)	bfin_write16(USB_EP_NI5_TXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXMAXP()		bfin_read16(USB_EP_NI6_TXMAXP)
-#define bfin_write_USB_EP_NI6_TXMAXP(val)	bfin_write16(USB_EP_NI6_TXMAXP, val)
-#define bfin_read_USB_EP_NI6_TXCSR()		bfin_read16(USB_EP_NI6_TXCSR)
-#define bfin_write_USB_EP_NI6_TXCSR(val)	bfin_write16(USB_EP_NI6_TXCSR, val)
-#define bfin_read_USB_EP_NI6_RXMAXP()		bfin_read16(USB_EP_NI6_RXMAXP)
-#define bfin_write_USB_EP_NI6_RXMAXP(val)	bfin_write16(USB_EP_NI6_RXMAXP, val)
-#define bfin_read_USB_EP_NI6_RXCSR()		bfin_read16(USB_EP_NI6_RXCSR)
-#define bfin_write_USB_EP_NI6_RXCSR(val)	bfin_write16(USB_EP_NI6_RXCSR, val)
-#define bfin_read_USB_EP_NI6_RXCOUNT()		bfin_read16(USB_EP_NI6_RXCOUNT)
-#define bfin_write_USB_EP_NI6_RXCOUNT(val)	bfin_write16(USB_EP_NI6_RXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXTYPE()		bfin_read16(USB_EP_NI6_TXTYPE)
-#define bfin_write_USB_EP_NI6_TXTYPE(val)	bfin_write16(USB_EP_NI6_TXTYPE, val)
-#define bfin_read_USB_EP_NI6_TXINTERVAL()	bfin_read16(USB_EP_NI6_TXINTERVAL)
-#define bfin_write_USB_EP_NI6_TXINTERVAL(val)	bfin_write16(USB_EP_NI6_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_RXTYPE()		bfin_read16(USB_EP_NI6_RXTYPE)
-#define bfin_write_USB_EP_NI6_RXTYPE(val)	bfin_write16(USB_EP_NI6_RXTYPE, val)
-#define bfin_read_USB_EP_NI6_RXINTERVAL()	bfin_read16(USB_EP_NI6_RXINTERVAL)
-#define bfin_write_USB_EP_NI6_RXINTERVAL(val)	bfin_write16(USB_EP_NI6_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 7 Control Registers */
-
-#define bfin_read_USB_EP_NI6_TXCOUNT()		bfin_read16(USB_EP_NI6_TXCOUNT)
-#define bfin_write_USB_EP_NI6_TXCOUNT(val)	bfin_write16(USB_EP_NI6_TXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXMAXP()		bfin_read16(USB_EP_NI7_TXMAXP)
-#define bfin_write_USB_EP_NI7_TXMAXP(val)	bfin_write16(USB_EP_NI7_TXMAXP, val)
-#define bfin_read_USB_EP_NI7_TXCSR()		bfin_read16(USB_EP_NI7_TXCSR)
-#define bfin_write_USB_EP_NI7_TXCSR(val)	bfin_write16(USB_EP_NI7_TXCSR, val)
-#define bfin_read_USB_EP_NI7_RXMAXP()		bfin_read16(USB_EP_NI7_RXMAXP)
-#define bfin_write_USB_EP_NI7_RXMAXP(val)	bfin_write16(USB_EP_NI7_RXMAXP, val)
-#define bfin_read_USB_EP_NI7_RXCSR()		bfin_read16(USB_EP_NI7_RXCSR)
-#define bfin_write_USB_EP_NI7_RXCSR(val)	bfin_write16(USB_EP_NI7_RXCSR, val)
-#define bfin_read_USB_EP_NI7_RXCOUNT()		bfin_read16(USB_EP_NI7_RXCOUNT)
-#define bfin_write_USB_EP_NI7_RXCOUNT(val)	bfin_write16(USB_EP_NI7_RXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXTYPE()		bfin_read16(USB_EP_NI7_TXTYPE)
-#define bfin_write_USB_EP_NI7_TXTYPE(val)	bfin_write16(USB_EP_NI7_TXTYPE, val)
-#define bfin_read_USB_EP_NI7_TXINTERVAL()	bfin_read16(USB_EP_NI7_TXINTERVAL)
-#define bfin_write_USB_EP_NI7_TXINTERVAL(val)	bfin_write16(USB_EP_NI7_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_RXTYPE()		bfin_read16(USB_EP_NI7_RXTYPE)
-#define bfin_write_USB_EP_NI7_RXTYPE(val)	bfin_write16(USB_EP_NI7_RXTYPE, val)
-#define bfin_read_USB_EP_NI7_RXINTERVAL()	bfin_read16(USB_EP_NI7_RXINTERVAL)
-#define bfin_write_USB_EP_NI7_RXINTERVAL(val)	bfin_write16(USB_EP_NI7_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_TXCOUNT()		bfin_read16(USB_EP_NI7_TXCOUNT)
-#define bfin_write_USB_EP_NI7_TXCOUNT(val)	bfin_write16(USB_EP_NI7_TXCOUNT, val)
-#define bfin_read_USB_DMA_INTERRUPT()		bfin_read16(USB_DMA_INTERRUPT)
-#define bfin_write_USB_DMA_INTERRUPT(val)	bfin_write16(USB_DMA_INTERRUPT, val)
-
-/* USB Channel 0 Config Registers */
-
-#define bfin_read_USB_DMA0CONTROL()		bfin_read16(USB_DMA0CONTROL)
-#define bfin_write_USB_DMA0CONTROL(val)		bfin_write16(USB_DMA0CONTROL, val)
-#define bfin_read_USB_DMA0ADDRLOW()		bfin_read16(USB_DMA0ADDRLOW)
-#define bfin_write_USB_DMA0ADDRLOW(val)		bfin_write16(USB_DMA0ADDRLOW, val)
-#define bfin_read_USB_DMA0ADDRHIGH()		bfin_read16(USB_DMA0ADDRHIGH)
-#define bfin_write_USB_DMA0ADDRHIGH(val)	bfin_write16(USB_DMA0ADDRHIGH, val)
-#define bfin_read_USB_DMA0COUNTLOW()		bfin_read16(USB_DMA0COUNTLOW)
-#define bfin_write_USB_DMA0COUNTLOW(val)	bfin_write16(USB_DMA0COUNTLOW, val)
-#define bfin_read_USB_DMA0COUNTHIGH()		bfin_read16(USB_DMA0COUNTHIGH)
-#define bfin_write_USB_DMA0COUNTHIGH(val)	bfin_write16(USB_DMA0COUNTHIGH, val)
-
-/* USB Channel 1 Config Registers */
-
-#define bfin_read_USB_DMA1CONTROL()		bfin_read16(USB_DMA1CONTROL)
-#define bfin_write_USB_DMA1CONTROL(val)		bfin_write16(USB_DMA1CONTROL, val)
-#define bfin_read_USB_DMA1ADDRLOW()		bfin_read16(USB_DMA1ADDRLOW)
-#define bfin_write_USB_DMA1ADDRLOW(val)		bfin_write16(USB_DMA1ADDRLOW, val)
-#define bfin_read_USB_DMA1ADDRHIGH()		bfin_read16(USB_DMA1ADDRHIGH)
-#define bfin_write_USB_DMA1ADDRHIGH(val)	bfin_write16(USB_DMA1ADDRHIGH, val)
-#define bfin_read_USB_DMA1COUNTLOW()		bfin_read16(USB_DMA1COUNTLOW)
-#define bfin_write_USB_DMA1COUNTLOW(val)	bfin_write16(USB_DMA1COUNTLOW, val)
-#define bfin_read_USB_DMA1COUNTHIGH()		bfin_read16(USB_DMA1COUNTHIGH)
-#define bfin_write_USB_DMA1COUNTHIGH(val)	bfin_write16(USB_DMA1COUNTHIGH, val)
-
-/* USB Channel 2 Config Registers */
-
-#define bfin_read_USB_DMA2CONTROL()		bfin_read16(USB_DMA2CONTROL)
-#define bfin_write_USB_DMA2CONTROL(val)		bfin_write16(USB_DMA2CONTROL, val)
-#define bfin_read_USB_DMA2ADDRLOW()		bfin_read16(USB_DMA2ADDRLOW)
-#define bfin_write_USB_DMA2ADDRLOW(val)		bfin_write16(USB_DMA2ADDRLOW, val)
-#define bfin_read_USB_DMA2ADDRHIGH()		bfin_read16(USB_DMA2ADDRHIGH)
-#define bfin_write_USB_DMA2ADDRHIGH(val)	bfin_write16(USB_DMA2ADDRHIGH, val)
-#define bfin_read_USB_DMA2COUNTLOW()		bfin_read16(USB_DMA2COUNTLOW)
-#define bfin_write_USB_DMA2COUNTLOW(val)	bfin_write16(USB_DMA2COUNTLOW, val)
-#define bfin_read_USB_DMA2COUNTHIGH()		bfin_read16(USB_DMA2COUNTHIGH)
-#define bfin_write_USB_DMA2COUNTHIGH(val)	bfin_write16(USB_DMA2COUNTHIGH, val)
-
-/* USB Channel 3 Config Registers */
-
-#define bfin_read_USB_DMA3CONTROL()		bfin_read16(USB_DMA3CONTROL)
-#define bfin_write_USB_DMA3CONTROL(val)		bfin_write16(USB_DMA3CONTROL, val)
-#define bfin_read_USB_DMA3ADDRLOW()		bfin_read16(USB_DMA3ADDRLOW)
-#define bfin_write_USB_DMA3ADDRLOW(val)		bfin_write16(USB_DMA3ADDRLOW, val)
-#define bfin_read_USB_DMA3ADDRHIGH()		bfin_read16(USB_DMA3ADDRHIGH)
-#define bfin_write_USB_DMA3ADDRHIGH(val)	bfin_write16(USB_DMA3ADDRHIGH, val)
-#define bfin_read_USB_DMA3COUNTLOW()		bfin_read16(USB_DMA3COUNTLOW)
-#define bfin_write_USB_DMA3COUNTLOW(val)	bfin_write16(USB_DMA3COUNTLOW, val)
-#define bfin_read_USB_DMA3COUNTHIGH()		bfin_read16(USB_DMA3COUNTHIGH)
-#define bfin_write_USB_DMA3COUNTHIGH(val)	bfin_write16(USB_DMA3COUNTHIGH, val)
-
-/* USB Channel 4 Config Registers */
-
-#define bfin_read_USB_DMA4CONTROL()		bfin_read16(USB_DMA4CONTROL)
-#define bfin_write_USB_DMA4CONTROL(val)		bfin_write16(USB_DMA4CONTROL, val)
-#define bfin_read_USB_DMA4ADDRLOW()		bfin_read16(USB_DMA4ADDRLOW)
-#define bfin_write_USB_DMA4ADDRLOW(val)		bfin_write16(USB_DMA4ADDRLOW, val)
-#define bfin_read_USB_DMA4ADDRHIGH()		bfin_read16(USB_DMA4ADDRHIGH)
-#define bfin_write_USB_DMA4ADDRHIGH(val)	bfin_write16(USB_DMA4ADDRHIGH, val)
-#define bfin_read_USB_DMA4COUNTLOW()		bfin_read16(USB_DMA4COUNTLOW)
-#define bfin_write_USB_DMA4COUNTLOW(val)	bfin_write16(USB_DMA4COUNTLOW, val)
-#define bfin_read_USB_DMA4COUNTHIGH()		bfin_read16(USB_DMA4COUNTHIGH)
-#define bfin_write_USB_DMA4COUNTHIGH(val)	bfin_write16(USB_DMA4COUNTHIGH, val)
-
-/* USB Channel 5 Config Registers */
-
-#define bfin_read_USB_DMA5CONTROL()		bfin_read16(USB_DMA5CONTROL)
-#define bfin_write_USB_DMA5CONTROL(val)		bfin_write16(USB_DMA5CONTROL, val)
-#define bfin_read_USB_DMA5ADDRLOW()		bfin_read16(USB_DMA5ADDRLOW)
-#define bfin_write_USB_DMA5ADDRLOW(val)		bfin_write16(USB_DMA5ADDRLOW, val)
-#define bfin_read_USB_DMA5ADDRHIGH()		bfin_read16(USB_DMA5ADDRHIGH)
-#define bfin_write_USB_DMA5ADDRHIGH(val)		bfin_write16(USB_DMA5ADDRHIGH, val)
-#define bfin_read_USB_DMA5COUNTLOW()		bfin_read16(USB_DMA5COUNTLOW)
-#define bfin_write_USB_DMA5COUNTLOW(val)	bfin_write16(USB_DMA5COUNTLOW, val)
-#define bfin_read_USB_DMA5COUNTHIGH()		bfin_read16(USB_DMA5COUNTHIGH)
-#define bfin_write_USB_DMA5COUNTHIGH(val)	bfin_write16(USB_DMA5COUNTHIGH, val)
-
-/* USB Channel 6 Config Registers */
-
-#define bfin_read_USB_DMA6CONTROL()		bfin_read16(USB_DMA6CONTROL)
-#define bfin_write_USB_DMA6CONTROL(val)		bfin_write16(USB_DMA6CONTROL, val)
-#define bfin_read_USB_DMA6ADDRLOW()		bfin_read16(USB_DMA6ADDRLOW)
-#define bfin_write_USB_DMA6ADDRLOW(val)		bfin_write16(USB_DMA6ADDRLOW, val)
-#define bfin_read_USB_DMA6ADDRHIGH()		bfin_read16(USB_DMA6ADDRHIGH)
-#define bfin_write_USB_DMA6ADDRHIGH(val)	bfin_write16(USB_DMA6ADDRHIGH, val)
-#define bfin_read_USB_DMA6COUNTLOW()		bfin_read16(USB_DMA6COUNTLOW)
-#define bfin_write_USB_DMA6COUNTLOW(val)	bfin_write16(USB_DMA6COUNTLOW, val)
-#define bfin_read_USB_DMA6COUNTHIGH()		bfin_read16(USB_DMA6COUNTHIGH)
-#define bfin_write_USB_DMA6COUNTHIGH(val)	bfin_write16(USB_DMA6COUNTHIGH, val)
-
-/* USB Channel 7 Config Registers */
-
-#define bfin_read_USB_DMA7CONTROL()		bfin_read16(USB_DMA7CONTROL)
-#define bfin_write_USB_DMA7CONTROL(val)		bfin_write16(USB_DMA7CONTROL, val)
-#define bfin_read_USB_DMA7ADDRLOW()		bfin_read16(USB_DMA7ADDRLOW)
-#define bfin_write_USB_DMA7ADDRLOW(val)		bfin_write16(USB_DMA7ADDRLOW, val)
-#define bfin_read_USB_DMA7ADDRHIGH()		bfin_read16(USB_DMA7ADDRHIGH)
-#define bfin_write_USB_DMA7ADDRHIGH(val)	bfin_write16(USB_DMA7ADDRHIGH, val)
-#define bfin_read_USB_DMA7COUNTLOW()		bfin_read16(USB_DMA7COUNTLOW)
-#define bfin_write_USB_DMA7COUNTLOW(val)	bfin_write16(USB_DMA7COUNTLOW, val)
-#define bfin_read_USB_DMA7COUNTHIGH()		bfin_read16(USB_DMA7COUNTHIGH)
-#define bfin_write_USB_DMA7COUNTHIGH(val)	bfin_write16(USB_DMA7COUNTHIGH, val)
-
-/* Keybfin_read_()ad Registers */
-
-#define bfin_read_KPAD_CTL()		bfin_read16(KPAD_CTL)
-#define bfin_write_KPAD_CTL(val)	bfin_write16(KPAD_CTL, val)
-#define bfin_read_KPAD_PRESCALE()	bfin_read16(KPAD_PRESCALE)
-#define bfin_write_KPAD_PRESCALE(val)	bfin_write16(KPAD_PRESCALE, val)
-#define bfin_read_KPAD_MSEL()		bfin_read16(KPAD_MSEL)
-#define bfin_write_KPAD_MSEL(val)	bfin_write16(KPAD_MSEL, val)
-#define bfin_read_KPAD_ROWCOL()		bfin_read16(KPAD_ROWCOL)
-#define bfin_write_KPAD_ROWCOL(val)	bfin_write16(KPAD_ROWCOL, val)
-#define bfin_read_KPAD_STAT()		bfin_read16(KPAD_STAT)
-#define bfin_write_KPAD_STAT(val)	bfin_write16(KPAD_STAT, val)
-#define bfin_read_KPAD_SOFTEVAL()	bfin_read16(KPAD_SOFTEVAL)
-#define bfin_write_KPAD_SOFTEVAL(val)	bfin_write16(KPAD_SOFTEVAL, val)
-
-/* Pixel Combfin_read_()ositor (PIXC) Registers */
-
-#define bfin_read_PIXC_CTL()		bfin_read16(PIXC_CTL)
-#define bfin_write_PIXC_CTL(val)	bfin_write16(PIXC_CTL, val)
-#define bfin_read_PIXC_PPL()		bfin_read16(PIXC_PPL)
-#define bfin_write_PIXC_PPL(val)	bfin_write16(PIXC_PPL, val)
-#define bfin_read_PIXC_LPF()		bfin_read16(PIXC_LPF)
-#define bfin_write_PIXC_LPF(val)	bfin_write16(PIXC_LPF, val)
-#define bfin_read_PIXC_AHSTART()	bfin_read16(PIXC_AHSTART)
-#define bfin_write_PIXC_AHSTART(val)	bfin_write16(PIXC_AHSTART, val)
-#define bfin_read_PIXC_AHEND()		bfin_read16(PIXC_AHEND)
-#define bfin_write_PIXC_AHEND(val)	bfin_write16(PIXC_AHEND, val)
-#define bfin_read_PIXC_AVSTART()	bfin_read16(PIXC_AVSTART)
-#define bfin_write_PIXC_AVSTART(val)	bfin_write16(PIXC_AVSTART, val)
-#define bfin_read_PIXC_AVEND()		bfin_read16(PIXC_AVEND)
-#define bfin_write_PIXC_AVEND(val)	bfin_write16(PIXC_AVEND, val)
-#define bfin_read_PIXC_ATRANSP()	bfin_read16(PIXC_ATRANSP)
-#define bfin_write_PIXC_ATRANSP(val)	bfin_write16(PIXC_ATRANSP, val)
-#define bfin_read_PIXC_BHSTART()	bfin_read16(PIXC_BHSTART)
-#define bfin_write_PIXC_BHSTART(val)	bfin_write16(PIXC_BHSTART, val)
-#define bfin_read_PIXC_BHEND()		bfin_read16(PIXC_BHEND)
-#define bfin_write_PIXC_BHEND(val)	bfin_write16(PIXC_BHEND, val)
-#define bfin_read_PIXC_BVSTART()	bfin_read16(PIXC_BVSTART)
-#define bfin_write_PIXC_BVSTART(val)	bfin_write16(PIXC_BVSTART, val)
-#define bfin_read_PIXC_BVEND()		bfin_read16(PIXC_BVEND)
-#define bfin_write_PIXC_BVEND(val)	bfin_write16(PIXC_BVEND, val)
-#define bfin_read_PIXC_BTRANSP()	bfin_read16(PIXC_BTRANSP)
-#define bfin_write_PIXC_BTRANSP(val)	bfin_write16(PIXC_BTRANSP, val)
-#define bfin_read_PIXC_INTRSTAT()	bfin_read16(PIXC_INTRSTAT)
-#define bfin_write_PIXC_INTRSTAT(val)	bfin_write16(PIXC_INTRSTAT, val)
-#define bfin_read_PIXC_RYCON()		bfin_read32(PIXC_RYCON)
-#define bfin_write_PIXC_RYCON(val)	bfin_write32(PIXC_RYCON, val)
-#define bfin_read_PIXC_GUCON()		bfin_read32(PIXC_GUCON)
-#define bfin_write_PIXC_GUCON(val)	bfin_write32(PIXC_GUCON, val)
-#define bfin_read_PIXC_BVCON()		bfin_read32(PIXC_BVCON)
-#define bfin_write_PIXC_BVCON(val)	bfin_write32(PIXC_BVCON, val)
-#define bfin_read_PIXC_CCBIAS()		bfin_read32(PIXC_CCBIAS)
-#define bfin_write_PIXC_CCBIAS(val)	bfin_write32(PIXC_CCBIAS, val)
-#define bfin_read_PIXC_TC()		bfin_read32(PIXC_TC)
-#define bfin_write_PIXC_TC(val)		bfin_write32(PIXC_TC, val)
-
-/* Handshake MDMA 0 Registers */
-
-#define bfin_read_HMDMA0_CONTROL()		bfin_read16(HMDMA0_CONTROL)
-#define bfin_write_HMDMA0_CONTROL(val)		bfin_write16(HMDMA0_CONTROL, val)
-#define bfin_read_HMDMA0_ECINIT()		bfin_read16(HMDMA0_ECINIT)
-#define bfin_write_HMDMA0_ECINIT(val)		bfin_write16(HMDMA0_ECINIT, val)
-#define bfin_read_HMDMA0_BCINIT()		bfin_read16(HMDMA0_BCINIT)
-#define bfin_write_HMDMA0_BCINIT(val)		bfin_write16(HMDMA0_BCINIT, val)
-#define bfin_read_HMDMA0_ECURGENT()		bfin_read16(HMDMA0_ECURGENT)
-#define bfin_write_HMDMA0_ECURGENT(val)		bfin_write16(HMDMA0_ECURGENT, val)
-#define bfin_read_HMDMA0_ECOVERFLOW()		bfin_read16(HMDMA0_ECOVERFLOW)
-#define bfin_write_HMDMA0_ECOVERFLOW(val)	bfin_write16(HMDMA0_ECOVERFLOW, val)
-#define bfin_read_HMDMA0_ECOUNT()		bfin_read16(HMDMA0_ECOUNT)
-#define bfin_write_HMDMA0_ECOUNT(val)		bfin_write16(HMDMA0_ECOUNT, val)
-#define bfin_read_HMDMA0_BCOUNT()		bfin_read16(HMDMA0_BCOUNT)
-#define bfin_write_HMDMA0_BCOUNT(val)		bfin_write16(HMDMA0_BCOUNT, val)
-
-/* Handshake MDMA 1 Registers */
-
-#define bfin_read_HMDMA1_CONTROL()		bfin_read16(HMDMA1_CONTROL)
-#define bfin_write_HMDMA1_CONTROL(val)		bfin_write16(HMDMA1_CONTROL, val)
-#define bfin_read_HMDMA1_ECINIT()		bfin_read16(HMDMA1_ECINIT)
-#define bfin_write_HMDMA1_ECINIT(val)		bfin_write16(HMDMA1_ECINIT, val)
-#define bfin_read_HMDMA1_BCINIT()		bfin_read16(HMDMA1_BCINIT)
-#define bfin_write_HMDMA1_BCINIT(val)		bfin_write16(HMDMA1_BCINIT, val)
-#define bfin_read_HMDMA1_ECURGENT()		bfin_read16(HMDMA1_ECURGENT)
-#define bfin_write_HMDMA1_ECURGENT(val)		bfin_write16(HMDMA1_ECURGENT, val)
-#define bfin_read_HMDMA1_ECOVERFLOW()		bfin_read16(HMDMA1_ECOVERFLOW)
-#define bfin_write_HMDMA1_ECOVERFLOW(val)	bfin_write16(HMDMA1_ECOVERFLOW, val)
-#define bfin_read_HMDMA1_ECOUNT()		bfin_read16(HMDMA1_ECOUNT)
-#define bfin_write_HMDMA1_ECOUNT(val)		bfin_write16(HMDMA1_ECOUNT, val)
-#define bfin_read_HMDMA1_BCOUNT()		bfin_read16(HMDMA1_BCOUNT)
-#define bfin_write_HMDMA1_BCOUNT(val)		bfin_write16(HMDMA1_BCOUNT, val)
-
 #endif /* _CDEF_BF549_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
index a2e9d98..32f71e6 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
@@ -2615,17 +2615,6 @@
 #define bfin_read_CNT_MIN()		bfin_read32(CNT_MIN)
 #define bfin_write_CNT_MIN(val)		bfin_write32(CNT_MIN, val)
 
-/* OTP/FUSE Registers */
-
-#define bfin_read_OTP_CONTROL()		bfin_read16(OTP_CONTROL)
-#define bfin_write_OTP_CONTROL(val)	bfin_write16(OTP_CONTROL, val)
-#define bfin_read_OTP_BEN()		bfin_read16(OTP_BEN)
-#define bfin_write_OTP_BEN(val)		bfin_write16(OTP_BEN, val)
-#define bfin_read_OTP_STATUS()		bfin_read16(OTP_STATUS)
-#define bfin_write_OTP_STATUS(val)	bfin_write16(OTP_STATUS, val)
-#define bfin_read_OTP_TIMING()		bfin_read32(OTP_TIMING)
-#define bfin_write_OTP_TIMING(val)	bfin_write32(OTP_TIMING, val)
-
 /* Security Registers */
 
 #define bfin_read_SECURE_SYSSWT()	bfin_read32(SECURE_SYSSWT)
@@ -2640,17 +2629,6 @@
 #define bfin_read_DMAC1_PERIMUX()	bfin_read16(DMAC1_PERIMUX)
 #define bfin_write_DMAC1_PERIMUX(val)	bfin_write16(DMAC1_PERIMUX, val)
 
-/* OTP Read/Write Data Buffer Registers */
-
-#define bfin_read_OTP_DATA0()		bfin_read32(OTP_DATA0)
-#define bfin_write_OTP_DATA0(val)	bfin_write32(OTP_DATA0, val)
-#define bfin_read_OTP_DATA1()		bfin_read32(OTP_DATA1)
-#define bfin_write_OTP_DATA1(val)	bfin_write32(OTP_DATA1, val)
-#define bfin_read_OTP_DATA2()		bfin_read32(OTP_DATA2)
-#define bfin_write_OTP_DATA2(val)	bfin_write32(OTP_DATA2, val)
-#define bfin_read_OTP_DATA3()		bfin_read32(OTP_DATA3)
-#define bfin_write_OTP_DATA3(val)	bfin_write32(OTP_DATA3, val)
-
 /* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 bfin_read_()rocessor */
 
 /* legacy definitions */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index 39f588d..f916c52 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -624,9 +624,9 @@
 #define                 DMA_READY  0x1        /* DMA Ready */
 #define                  FIFOFULL  0x2        /* FIFO Full */
 #define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define                  COMPLETE  0x8        /* DMA Complete */
+#define              DMA_COMPLETE  0x8        /* DMA Complete */
 #define                      HSHK  0x10       /* Host Handshake */
-#define                   TIMEOUT  0x20       /* Host Timeout */
+#define                 HSTIMEOUT  0x20       /* Host Timeout */
 #define                      HIRQ  0x40       /* Host Interrupt Request */
 #define                ALLOW_CNFG  0x80       /* Allow New Configuration */
 #define                   DMA_DIR  0x100      /* DMA Direction */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index c4dcf30..72c3436 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -4,18 +4,18 @@
  * Licensed under the ADI BSD license or the GPL-2 (or later)
  */
 
-#ifndef _DEF_BF548_H
-#define _DEF_BF548_H
+#ifndef _DEF_BF547_H
+#define _DEF_BF547_H
 
 /* Include all Core registers and bit definitions */
 #include <asm/def_LPBlackfin.h>
 
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF547 */
 
 /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
 #include "defBF54x_base.h"
 
-/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+/* The following are the #defines needed by ADSP-BF547 that are not in the common header */
 
 /* Timer Registers */
 
@@ -1217,4 +1217,4 @@
 /* ******************************************* */
 
 
-#endif /* _DEF_BF548_H */
+#endif /* _DEF_BF547_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
index a507998..3fb33b0 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -15,115 +15,8 @@
 /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
 #include "defBF54x_base.h"
 
-/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
-
-/* Timer Registers */
-
-#define                    TIMER8_CONFIG  0xffc00600   /* Timer 8 Configuration Register */
-#define                   TIMER8_COUNTER  0xffc00604   /* Timer 8 Counter Register */
-#define                    TIMER8_PERIOD  0xffc00608   /* Timer 8 Period Register */
-#define                     TIMER8_WIDTH  0xffc0060c   /* Timer 8 Width Register */
-#define                    TIMER9_CONFIG  0xffc00610   /* Timer 9 Configuration Register */
-#define                   TIMER9_COUNTER  0xffc00614   /* Timer 9 Counter Register */
-#define                    TIMER9_PERIOD  0xffc00618   /* Timer 9 Period Register */
-#define                     TIMER9_WIDTH  0xffc0061c   /* Timer 9 Width Register */
-#define                   TIMER10_CONFIG  0xffc00620   /* Timer 10 Configuration Register */
-#define                  TIMER10_COUNTER  0xffc00624   /* Timer 10 Counter Register */
-#define                   TIMER10_PERIOD  0xffc00628   /* Timer 10 Period Register */
-#define                    TIMER10_WIDTH  0xffc0062c   /* Timer 10 Width Register */
-
-/* Timer Group of 3 Registers */
-
-#define                    TIMER_ENABLE1  0xffc00640   /* Timer Group of 3 Enable Register */
-#define                   TIMER_DISABLE1  0xffc00644   /* Timer Group of 3 Disable Register */
-#define                    TIMER_STATUS1  0xffc00648   /* Timer Group of 3 Status Register */
-
-/* SPORT0 Registers */
-
-#define                      SPORT0_TCR1  0xffc00800   /* SPORT0 Transmit Configuration 1 Register */
-#define                      SPORT0_TCR2  0xffc00804   /* SPORT0 Transmit Configuration 2 Register */
-#define                   SPORT0_TCLKDIV  0xffc00808   /* SPORT0 Transmit Serial Clock Divider Register */
-#define                    SPORT0_TFSDIV  0xffc0080c   /* SPORT0 Transmit Frame Sync Divider Register */
-#define                        SPORT0_TX  0xffc00810   /* SPORT0 Transmit Data Register */
-#define                        SPORT0_RX  0xffc00818   /* SPORT0 Receive Data Register */
-#define                      SPORT0_RCR1  0xffc00820   /* SPORT0 Receive Configuration 1 Register */
-#define                      SPORT0_RCR2  0xffc00824   /* SPORT0 Receive Configuration 2 Register */
-#define                   SPORT0_RCLKDIV  0xffc00828   /* SPORT0 Receive Serial Clock Divider Register */
-#define                    SPORT0_RFSDIV  0xffc0082c   /* SPORT0 Receive Frame Sync Divider Register */
-#define                      SPORT0_STAT  0xffc00830   /* SPORT0 Status Register */
-#define                      SPORT0_CHNL  0xffc00834   /* SPORT0 Current Channel Register */
-#define                     SPORT0_MCMC1  0xffc00838   /* SPORT0 Multi channel Configuration Register 1 */
-#define                     SPORT0_MCMC2  0xffc0083c   /* SPORT0 Multi channel Configuration Register 2 */
-#define                     SPORT0_MTCS0  0xffc00840   /* SPORT0 Multi channel Transmit Select Register 0 */
-#define                     SPORT0_MTCS1  0xffc00844   /* SPORT0 Multi channel Transmit Select Register 1 */
-#define                     SPORT0_MTCS2  0xffc00848   /* SPORT0 Multi channel Transmit Select Register 2 */
-#define                     SPORT0_MTCS3  0xffc0084c   /* SPORT0 Multi channel Transmit Select Register 3 */
-#define                     SPORT0_MRCS0  0xffc00850   /* SPORT0 Multi channel Receive Select Register 0 */
-#define                     SPORT0_MRCS1  0xffc00854   /* SPORT0 Multi channel Receive Select Register 1 */
-#define                     SPORT0_MRCS2  0xffc00858   /* SPORT0 Multi channel Receive Select Register 2 */
-#define                     SPORT0_MRCS3  0xffc0085c   /* SPORT0 Multi channel Receive Select Register 3 */
-
-/* EPPI0 Registers */
-
-#define                     EPPI0_STATUS  0xffc01000   /* EPPI0 Status Register */
-#define                     EPPI0_HCOUNT  0xffc01004   /* EPPI0 Horizontal Transfer Count Register */
-#define                     EPPI0_HDELAY  0xffc01008   /* EPPI0 Horizontal Delay Count Register */
-#define                     EPPI0_VCOUNT  0xffc0100c   /* EPPI0 Vertical Transfer Count Register */
-#define                     EPPI0_VDELAY  0xffc01010   /* EPPI0 Vertical Delay Count Register */
-#define                      EPPI0_FRAME  0xffc01014   /* EPPI0 Lines per Frame Register */
-#define                       EPPI0_LINE  0xffc01018   /* EPPI0 Samples per Line Register */
-#define                     EPPI0_CLKDIV  0xffc0101c   /* EPPI0 Clock Divide Register */
-#define                    EPPI0_CONTROL  0xffc01020   /* EPPI0 Control Register */
-#define                   EPPI0_FS1W_HBL  0xffc01024   /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
-#define                  EPPI0_FS1P_AVPL  0xffc01028   /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
-#define                   EPPI0_FS2W_LVB  0xffc0102c   /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
-#define                  EPPI0_FS2P_LAVF  0xffc01030   /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
-#define                       EPPI0_CLIP  0xffc01034   /* EPPI0 Clipping Register */
-
-/* UART2 Registers */
-
-#define                        UART2_DLL  0xffc02100   /* Divisor Latch Low Byte */
-#define                        UART2_DLH  0xffc02104   /* Divisor Latch High Byte */
-#define                       UART2_GCTL  0xffc02108   /* Global Control Register */
-#define                        UART2_LCR  0xffc0210c   /* Line Control Register */
-#define                        UART2_MCR  0xffc02110   /* Modem Control Register */
-#define                        UART2_LSR  0xffc02114   /* Line Status Register */
-#define                        UART2_MSR  0xffc02118   /* Modem Status Register */
-#define                        UART2_SCR  0xffc0211c   /* Scratch Register */
-#define                    UART2_IER_SET  0xffc02120   /* Interrupt Enable Register Set */
-#define                  UART2_IER_CLEAR  0xffc02124   /* Interrupt Enable Register Clear */
-#define                        UART2_RBR  0xffc0212c   /* Receive Buffer Register */
-
-/* Two Wire Interface Registers (TWI1) */
-
-#define                     TWI1_REGBASE  0xffc02200
-#define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
-#define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
-#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
-#define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
-#define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
-#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
-#define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
-#define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
-#define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
-#define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
-#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
-#define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
-#define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
-#define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
-#define                   TWI1_RCV_DATA8  0xffc02288   /* TWI FIFO Receive Data Single Byte Register */
-#define                  TWI1_RCV_DATA16  0xffc0228c   /* TWI FIFO Receive Data Double Byte Register */
-
-/* SPI2  Registers */
-
-#define                     SPI2_REGBASE  0xffc02400
-#define                         SPI2_CTL  0xffc02400   /* SPI2 Control Register */
-#define                         SPI2_FLG  0xffc02404   /* SPI2 Flag Register */
-#define                        SPI2_STAT  0xffc02408   /* SPI2 Status Register */
-#define                        SPI2_TDBR  0xffc0240c   /* SPI2 Transmit Data Buffer Register */
-#define                        SPI2_RDBR  0xffc02410   /* SPI2 Receive Data Buffer Register */
-#define                        SPI2_BAUD  0xffc02414   /* SPI2 Baud Rate Register */
-#define                      SPI2_SHADOW  0xffc02418   /* SPI2 Receive Data Buffer Shadow Register */
+/* The BF548 is like the BF547, but has additional CANs */
+#include "defBF547.h"
 
 /* CAN Controller 1 Config 1 Registers */
 
@@ -508,1096 +401,4 @@
 #define                    CAN1_MB31_ID0  0xffc037f8   /* CAN Controller 1 Mailbox 31 ID0 Register */
 #define                    CAN1_MB31_ID1  0xffc037fc   /* CAN Controller 1 Mailbox 31 ID1 Register */
 
-/* ATAPI Registers */
-
-#define                    ATAPI_CONTROL  0xffc03800   /* ATAPI Control Register */
-#define                     ATAPI_STATUS  0xffc03804   /* ATAPI Status Register */
-#define                   ATAPI_DEV_ADDR  0xffc03808   /* ATAPI Device Register Address */
-#define                  ATAPI_DEV_TXBUF  0xffc0380c   /* ATAPI Device Register Write Data */
-#define                  ATAPI_DEV_RXBUF  0xffc03810   /* ATAPI Device Register Read Data */
-#define                   ATAPI_INT_MASK  0xffc03814   /* ATAPI Interrupt Mask Register */
-#define                 ATAPI_INT_STATUS  0xffc03818   /* ATAPI Interrupt Status Register */
-#define                   ATAPI_XFER_LEN  0xffc0381c   /* ATAPI Length of Transfer */
-#define                ATAPI_LINE_STATUS  0xffc03820   /* ATAPI Line Status */
-#define                   ATAPI_SM_STATE  0xffc03824   /* ATAPI State Machine Status */
-#define                  ATAPI_TERMINATE  0xffc03828   /* ATAPI Host Terminate */
-#define                 ATAPI_PIO_TFRCNT  0xffc0382c   /* ATAPI PIO mode transfer count */
-#define                 ATAPI_DMA_TFRCNT  0xffc03830   /* ATAPI DMA mode transfer count */
-#define               ATAPI_UMAIN_TFRCNT  0xffc03834   /* ATAPI UDMAIN transfer count */
-#define             ATAPI_UDMAOUT_TFRCNT  0xffc03838   /* ATAPI UDMAOUT transfer count */
-#define                  ATAPI_REG_TIM_0  0xffc03840   /* ATAPI Register Transfer Timing 0 */
-#define                  ATAPI_PIO_TIM_0  0xffc03844   /* ATAPI PIO Timing 0 Register */
-#define                  ATAPI_PIO_TIM_1  0xffc03848   /* ATAPI PIO Timing 1 Register */
-#define                ATAPI_MULTI_TIM_0  0xffc03850   /* ATAPI Multi-DMA Timing 0 Register */
-#define                ATAPI_MULTI_TIM_1  0xffc03854   /* ATAPI Multi-DMA Timing 1 Register */
-#define                ATAPI_MULTI_TIM_2  0xffc03858   /* ATAPI Multi-DMA Timing 2 Register */
-#define                ATAPI_ULTRA_TIM_0  0xffc03860   /* ATAPI Ultra-DMA Timing 0 Register */
-#define                ATAPI_ULTRA_TIM_1  0xffc03864   /* ATAPI Ultra-DMA Timing 1 Register */
-#define                ATAPI_ULTRA_TIM_2  0xffc03868   /* ATAPI Ultra-DMA Timing 2 Register */
-#define                ATAPI_ULTRA_TIM_3  0xffc0386c   /* ATAPI Ultra-DMA Timing 3 Register */
-
-/* SDH Registers */
-
-#define                      SDH_PWR_CTL  0xffc03900   /* SDH Power Control */
-#define                      SDH_CLK_CTL  0xffc03904   /* SDH Clock Control */
-#define                     SDH_ARGUMENT  0xffc03908   /* SDH Argument */
-#define                      SDH_COMMAND  0xffc0390c   /* SDH Command */
-#define                     SDH_RESP_CMD  0xffc03910   /* SDH Response Command */
-#define                    SDH_RESPONSE0  0xffc03914   /* SDH Response0 */
-#define                    SDH_RESPONSE1  0xffc03918   /* SDH Response1 */
-#define                    SDH_RESPONSE2  0xffc0391c   /* SDH Response2 */
-#define                    SDH_RESPONSE3  0xffc03920   /* SDH Response3 */
-#define                   SDH_DATA_TIMER  0xffc03924   /* SDH Data Timer */
-#define                    SDH_DATA_LGTH  0xffc03928   /* SDH Data Length */
-#define                     SDH_DATA_CTL  0xffc0392c   /* SDH Data Control */
-#define                     SDH_DATA_CNT  0xffc03930   /* SDH Data Counter */
-#define                       SDH_STATUS  0xffc03934   /* SDH Status */
-#define                   SDH_STATUS_CLR  0xffc03938   /* SDH Status Clear */
-#define                        SDH_MASK0  0xffc0393c   /* SDH Interrupt0 Mask */
-#define                        SDH_MASK1  0xffc03940   /* SDH Interrupt1 Mask */
-#define                     SDH_FIFO_CNT  0xffc03948   /* SDH FIFO Counter */
-#define                         SDH_FIFO  0xffc03980   /* SDH Data FIFO */
-#define                     SDH_E_STATUS  0xffc039c0   /* SDH Exception Status */
-#define                       SDH_E_MASK  0xffc039c4   /* SDH Exception Mask */
-#define                          SDH_CFG  0xffc039c8   /* SDH Configuration */
-#define                   SDH_RD_WAIT_EN  0xffc039cc   /* SDH Read Wait Enable */
-#define                         SDH_PID0  0xffc039d0   /* SDH Peripheral Identification0 */
-#define                         SDH_PID1  0xffc039d4   /* SDH Peripheral Identification1 */
-#define                         SDH_PID2  0xffc039d8   /* SDH Peripheral Identification2 */
-#define                         SDH_PID3  0xffc039dc   /* SDH Peripheral Identification3 */
-#define                         SDH_PID4  0xffc039e0   /* SDH Peripheral Identification4 */
-#define                         SDH_PID5  0xffc039e4   /* SDH Peripheral Identification5 */
-#define                         SDH_PID6  0xffc039e8   /* SDH Peripheral Identification6 */
-#define                         SDH_PID7  0xffc039ec   /* SDH Peripheral Identification7 */
-
-/* HOST Port Registers */
-
-#define                     HOST_CONTROL  0xffc03a00   /* HOST Control Register */
-#define                      HOST_STATUS  0xffc03a04   /* HOST Status Register */
-#define                     HOST_TIMEOUT  0xffc03a08   /* HOST Acknowledge Mode Timeout Register */
-
-/* USB Control Registers */
-
-#define                        USB_FADDR  0xffc03c00   /* Function address register */
-#define                        USB_POWER  0xffc03c04   /* Power management register */
-#define                       USB_INTRTX  0xffc03c08   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
-#define                       USB_INTRRX  0xffc03c0c   /* Interrupt register for Rx endpoints 1 to 7 */
-#define                      USB_INTRTXE  0xffc03c10   /* Interrupt enable register for IntrTx */
-#define                      USB_INTRRXE  0xffc03c14   /* Interrupt enable register for IntrRx */
-#define                      USB_INTRUSB  0xffc03c18   /* Interrupt register for common USB interrupts */
-#define                     USB_INTRUSBE  0xffc03c1c   /* Interrupt enable register for IntrUSB */
-#define                        USB_FRAME  0xffc03c20   /* USB frame number */
-#define                        USB_INDEX  0xffc03c24   /* Index register for selecting the indexed endpoint registers */
-#define                     USB_TESTMODE  0xffc03c28   /* Enabled USB 20 test modes */
-#define                     USB_GLOBINTR  0xffc03c2c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
-#define                   USB_GLOBAL_CTL  0xffc03c30   /* Global Clock Control for the core */
-
-/* USB Packet Control Registers */
-
-#define                USB_TX_MAX_PACKET  0xffc03c40   /* Maximum packet size for Host Tx endpoint */
-#define                         USB_CSR0  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define                        USB_TXCSR  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define                USB_RX_MAX_PACKET  0xffc03c48   /* Maximum packet size for Host Rx endpoint */
-#define                        USB_RXCSR  0xffc03c4c   /* Control Status register for Host Rx endpoint */
-#define                       USB_COUNT0  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define                      USB_RXCOUNT  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define                       USB_TXTYPE  0xffc03c54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
-#define                    USB_NAKLIMIT0  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define                   USB_TXINTERVAL  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define                       USB_RXTYPE  0xffc03c5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
-#define                   USB_RXINTERVAL  0xffc03c60   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
-#define                      USB_TXCOUNT  0xffc03c68   /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* USB Endpoint FIFO Registers */
-
-#define                     USB_EP0_FIFO  0xffc03c80   /* Endpoint 0 FIFO */
-#define                     USB_EP1_FIFO  0xffc03c88   /* Endpoint 1 FIFO */
-#define                     USB_EP2_FIFO  0xffc03c90   /* Endpoint 2 FIFO */
-#define                     USB_EP3_FIFO  0xffc03c98   /* Endpoint 3 FIFO */
-#define                     USB_EP4_FIFO  0xffc03ca0   /* Endpoint 4 FIFO */
-#define                     USB_EP5_FIFO  0xffc03ca8   /* Endpoint 5 FIFO */
-#define                     USB_EP6_FIFO  0xffc03cb0   /* Endpoint 6 FIFO */
-#define                     USB_EP7_FIFO  0xffc03cb8   /* Endpoint 7 FIFO */
-
-/* USB OTG Control Registers */
-
-#define                  USB_OTG_DEV_CTL  0xffc03d00   /* OTG Device Control Register */
-#define                 USB_OTG_VBUS_IRQ  0xffc03d04   /* OTG VBUS Control Interrupts */
-#define                USB_OTG_VBUS_MASK  0xffc03d08   /* VBUS Control Interrupt Enable */
-
-/* USB Phy Control Registers */
-
-#define                     USB_LINKINFO  0xffc03d48   /* Enables programming of some PHY-side delays */
-#define                        USB_VPLEN  0xffc03d4c   /* Determines duration of VBUS pulse for VBUS charging */
-#define                      USB_HS_EOF1  0xffc03d50   /* Time buffer for High-Speed transactions */
-#define                      USB_FS_EOF1  0xffc03d54   /* Time buffer for Full-Speed transactions */
-#define                      USB_LS_EOF1  0xffc03d58   /* Time buffer for Low-Speed transactions */
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define                   USB_APHY_CNTRL  0xffc03de0   /* Register that increases visibility of Analog PHY */
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define                   USB_APHY_CALIB  0xffc03de4   /* Register used to set some calibration values */
-#define                  USB_APHY_CNTRL2  0xffc03de8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define                     USB_PHY_TEST  0xffc03dec   /* Used for reducing simulation time and simplifies FIFO testability */
-#define                  USB_PLLOSC_CTRL  0xffc03df0   /* Used to program different parameters for USB PLL and Oscillator */
-#define                   USB_SRP_CLKDIV  0xffc03df4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
-
-/* USB Endpoint 0 Control Registers */
-
-#define                USB_EP_NI0_TXMAXP  0xffc03e00   /* Maximum packet size for Host Tx endpoint0 */
-#define                 USB_EP_NI0_TXCSR  0xffc03e04   /* Control Status register for endpoint 0 */
-#define                USB_EP_NI0_RXMAXP  0xffc03e08   /* Maximum packet size for Host Rx endpoint0 */
-#define                 USB_EP_NI0_RXCSR  0xffc03e0c   /* Control Status register for Host Rx endpoint0 */
-#define               USB_EP_NI0_RXCOUNT  0xffc03e10   /* Number of bytes received in endpoint 0 FIFO */
-#define                USB_EP_NI0_TXTYPE  0xffc03e14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
-#define            USB_EP_NI0_TXINTERVAL  0xffc03e18   /* Sets the NAK response timeout on Endpoint 0 */
-#define                USB_EP_NI0_RXTYPE  0xffc03e1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
-#define            USB_EP_NI0_RXINTERVAL  0xffc03e20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
-
-/* USB Endpoint 1 Control Registers */
-
-#define               USB_EP_NI0_TXCOUNT  0xffc03e28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
-#define                USB_EP_NI1_TXMAXP  0xffc03e40   /* Maximum packet size for Host Tx endpoint1 */
-#define                 USB_EP_NI1_TXCSR  0xffc03e44   /* Control Status register for endpoint1 */
-#define                USB_EP_NI1_RXMAXP  0xffc03e48   /* Maximum packet size for Host Rx endpoint1 */
-#define                 USB_EP_NI1_RXCSR  0xffc03e4c   /* Control Status register for Host Rx endpoint1 */
-#define               USB_EP_NI1_RXCOUNT  0xffc03e50   /* Number of bytes received in endpoint1 FIFO */
-#define                USB_EP_NI1_TXTYPE  0xffc03e54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
-#define            USB_EP_NI1_TXINTERVAL  0xffc03e58   /* Sets the NAK response timeout on Endpoint1 */
-#define                USB_EP_NI1_RXTYPE  0xffc03e5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
-#define            USB_EP_NI1_RXINTERVAL  0xffc03e60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
-
-/* USB Endpoint 2 Control Registers */
-
-#define               USB_EP_NI1_TXCOUNT  0xffc03e68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
-#define                USB_EP_NI2_TXMAXP  0xffc03e80   /* Maximum packet size for Host Tx endpoint2 */
-#define                 USB_EP_NI2_TXCSR  0xffc03e84   /* Control Status register for endpoint2 */
-#define                USB_EP_NI2_RXMAXP  0xffc03e88   /* Maximum packet size for Host Rx endpoint2 */
-#define                 USB_EP_NI2_RXCSR  0xffc03e8c   /* Control Status register for Host Rx endpoint2 */
-#define               USB_EP_NI2_RXCOUNT  0xffc03e90   /* Number of bytes received in endpoint2 FIFO */
-#define                USB_EP_NI2_TXTYPE  0xffc03e94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
-#define            USB_EP_NI2_TXINTERVAL  0xffc03e98   /* Sets the NAK response timeout on Endpoint2 */
-#define                USB_EP_NI2_RXTYPE  0xffc03e9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
-#define            USB_EP_NI2_RXINTERVAL  0xffc03ea0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
-
-/* USB Endpoint 3 Control Registers */
-
-#define               USB_EP_NI2_TXCOUNT  0xffc03ea8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
-#define                USB_EP_NI3_TXMAXP  0xffc03ec0   /* Maximum packet size for Host Tx endpoint3 */
-#define                 USB_EP_NI3_TXCSR  0xffc03ec4   /* Control Status register for endpoint3 */
-#define                USB_EP_NI3_RXMAXP  0xffc03ec8   /* Maximum packet size for Host Rx endpoint3 */
-#define                 USB_EP_NI3_RXCSR  0xffc03ecc   /* Control Status register for Host Rx endpoint3 */
-#define               USB_EP_NI3_RXCOUNT  0xffc03ed0   /* Number of bytes received in endpoint3 FIFO */
-#define                USB_EP_NI3_TXTYPE  0xffc03ed4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
-#define            USB_EP_NI3_TXINTERVAL  0xffc03ed8   /* Sets the NAK response timeout on Endpoint3 */
-#define                USB_EP_NI3_RXTYPE  0xffc03edc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
-#define            USB_EP_NI3_RXINTERVAL  0xffc03ee0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
-
-/* USB Endpoint 4 Control Registers */
-
-#define               USB_EP_NI3_TXCOUNT  0xffc03ee8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
-#define                USB_EP_NI4_TXMAXP  0xffc03f00   /* Maximum packet size for Host Tx endpoint4 */
-#define                 USB_EP_NI4_TXCSR  0xffc03f04   /* Control Status register for endpoint4 */
-#define                USB_EP_NI4_RXMAXP  0xffc03f08   /* Maximum packet size for Host Rx endpoint4 */
-#define                 USB_EP_NI4_RXCSR  0xffc03f0c   /* Control Status register for Host Rx endpoint4 */
-#define               USB_EP_NI4_RXCOUNT  0xffc03f10   /* Number of bytes received in endpoint4 FIFO */
-#define                USB_EP_NI4_TXTYPE  0xffc03f14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
-#define            USB_EP_NI4_TXINTERVAL  0xffc03f18   /* Sets the NAK response timeout on Endpoint4 */
-#define                USB_EP_NI4_RXTYPE  0xffc03f1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
-#define            USB_EP_NI4_RXINTERVAL  0xffc03f20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
-
-/* USB Endpoint 5 Control Registers */
-
-#define               USB_EP_NI4_TXCOUNT  0xffc03f28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
-#define                USB_EP_NI5_TXMAXP  0xffc03f40   /* Maximum packet size for Host Tx endpoint5 */
-#define                 USB_EP_NI5_TXCSR  0xffc03f44   /* Control Status register for endpoint5 */
-#define                USB_EP_NI5_RXMAXP  0xffc03f48   /* Maximum packet size for Host Rx endpoint5 */
-#define                 USB_EP_NI5_RXCSR  0xffc03f4c   /* Control Status register for Host Rx endpoint5 */
-#define               USB_EP_NI5_RXCOUNT  0xffc03f50   /* Number of bytes received in endpoint5 FIFO */
-#define                USB_EP_NI5_TXTYPE  0xffc03f54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
-#define            USB_EP_NI5_TXINTERVAL  0xffc03f58   /* Sets the NAK response timeout on Endpoint5 */
-#define                USB_EP_NI5_RXTYPE  0xffc03f5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
-#define            USB_EP_NI5_RXINTERVAL  0xffc03f60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
-
-/* USB Endpoint 6 Control Registers */
-
-#define               USB_EP_NI5_TXCOUNT  0xffc03f68   /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
-#define                USB_EP_NI6_TXMAXP  0xffc03f80   /* Maximum packet size for Host Tx endpoint6 */
-#define                 USB_EP_NI6_TXCSR  0xffc03f84   /* Control Status register for endpoint6 */
-#define                USB_EP_NI6_RXMAXP  0xffc03f88   /* Maximum packet size for Host Rx endpoint6 */
-#define                 USB_EP_NI6_RXCSR  0xffc03f8c   /* Control Status register for Host Rx endpoint6 */
-#define               USB_EP_NI6_RXCOUNT  0xffc03f90   /* Number of bytes received in endpoint6 FIFO */
-#define                USB_EP_NI6_TXTYPE  0xffc03f94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
-#define            USB_EP_NI6_TXINTERVAL  0xffc03f98   /* Sets the NAK response timeout on Endpoint6 */
-#define                USB_EP_NI6_RXTYPE  0xffc03f9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
-#define            USB_EP_NI6_RXINTERVAL  0xffc03fa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
-
-/* USB Endpoint 7 Control Registers */
-
-#define               USB_EP_NI6_TXCOUNT  0xffc03fa8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
-#define                USB_EP_NI7_TXMAXP  0xffc03fc0   /* Maximum packet size for Host Tx endpoint7 */
-#define                 USB_EP_NI7_TXCSR  0xffc03fc4   /* Control Status register for endpoint7 */
-#define                USB_EP_NI7_RXMAXP  0xffc03fc8   /* Maximum packet size for Host Rx endpoint7 */
-#define                 USB_EP_NI7_RXCSR  0xffc03fcc   /* Control Status register for Host Rx endpoint7 */
-#define               USB_EP_NI7_RXCOUNT  0xffc03fd0   /* Number of bytes received in endpoint7 FIFO */
-#define                USB_EP_NI7_TXTYPE  0xffc03fd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
-#define            USB_EP_NI7_TXINTERVAL  0xffc03fd8   /* Sets the NAK response timeout on Endpoint7 */
-#define                USB_EP_NI7_RXTYPE  0xffc03fdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define            USB_EP_NI7_RXINTERVAL  0xffc03ff0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define               USB_EP_NI7_TXCOUNT  0xffc03ff8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
-#define                USB_DMA_INTERRUPT  0xffc04000   /* Indicates pending interrupts for the DMA channels */
-
-/* USB Channel 0 Config Registers */
-
-#define                  USB_DMA0CONTROL  0xffc04004   /* DMA master channel 0 configuration */
-#define                  USB_DMA0ADDRLOW  0xffc04008   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
-#define                 USB_DMA0ADDRHIGH  0xffc0400c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
-#define                 USB_DMA0COUNTLOW  0xffc04010   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define                USB_DMA0COUNTHIGH  0xffc04014   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
-
-/* USB Channel 1 Config Registers */
-
-#define                  USB_DMA1CONTROL  0xffc04024   /* DMA master channel 1 configuration */
-#define                  USB_DMA1ADDRLOW  0xffc04028   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
-#define                 USB_DMA1ADDRHIGH  0xffc0402c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
-#define                 USB_DMA1COUNTLOW  0xffc04030   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define                USB_DMA1COUNTHIGH  0xffc04034   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
-
-/* USB Channel 2 Config Registers */
-
-#define                  USB_DMA2CONTROL  0xffc04044   /* DMA master channel 2 configuration */
-#define                  USB_DMA2ADDRLOW  0xffc04048   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
-#define                 USB_DMA2ADDRHIGH  0xffc0404c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
-#define                 USB_DMA2COUNTLOW  0xffc04050   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define                USB_DMA2COUNTHIGH  0xffc04054   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
-
-/* USB Channel 3 Config Registers */
-
-#define                  USB_DMA3CONTROL  0xffc04064   /* DMA master channel 3 configuration */
-#define                  USB_DMA3ADDRLOW  0xffc04068   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
-#define                 USB_DMA3ADDRHIGH  0xffc0406c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
-#define                 USB_DMA3COUNTLOW  0xffc04070   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define                USB_DMA3COUNTHIGH  0xffc04074   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
-
-/* USB Channel 4 Config Registers */
-
-#define                  USB_DMA4CONTROL  0xffc04084   /* DMA master channel 4 configuration */
-#define                  USB_DMA4ADDRLOW  0xffc04088   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
-#define                 USB_DMA4ADDRHIGH  0xffc0408c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
-#define                 USB_DMA4COUNTLOW  0xffc04090   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define                USB_DMA4COUNTHIGH  0xffc04094   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
-
-/* USB Channel 5 Config Registers */
-
-#define                  USB_DMA5CONTROL  0xffc040a4   /* DMA master channel 5 configuration */
-#define                  USB_DMA5ADDRLOW  0xffc040a8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
-#define                 USB_DMA5ADDRHIGH  0xffc040ac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
-#define                 USB_DMA5COUNTLOW  0xffc040b0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define                USB_DMA5COUNTHIGH  0xffc040b4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
-
-/* USB Channel 6 Config Registers */
-
-#define                  USB_DMA6CONTROL  0xffc040c4   /* DMA master channel 6 configuration */
-#define                  USB_DMA6ADDRLOW  0xffc040c8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
-#define                 USB_DMA6ADDRHIGH  0xffc040cc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
-#define                 USB_DMA6COUNTLOW  0xffc040d0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define                USB_DMA6COUNTHIGH  0xffc040d4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
-
-/* USB Channel 7 Config Registers */
-
-#define                  USB_DMA7CONTROL  0xffc040e4   /* DMA master channel 7 configuration */
-#define                  USB_DMA7ADDRLOW  0xffc040e8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
-#define                 USB_DMA7ADDRHIGH  0xffc040ec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
-#define                 USB_DMA7COUNTLOW  0xffc040f0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
-#define                USB_DMA7COUNTHIGH  0xffc040f4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
-
-/* Keypad Registers */
-
-#define                         KPAD_CTL  0xffc04100   /* Controls keypad module enable and disable */
-#define                    KPAD_PRESCALE  0xffc04104   /* Establish a time base for programing the KPAD_MSEL register */
-#define                        KPAD_MSEL  0xffc04108   /* Selects delay parameters for keypad interface sensitivity */
-#define                      KPAD_ROWCOL  0xffc0410c   /* Captures the row and column output values of the keys pressed */
-#define                        KPAD_STAT  0xffc04110   /* Holds and clears the status of the keypad interface interrupt */
-#define                    KPAD_SOFTEVAL  0xffc04114   /* Lets software force keypad interface to check for keys being pressed */
-
-/* Pixel Compositor (PIXC) Registers */
-
-#define                         PIXC_CTL  0xffc04400   /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
-#define                         PIXC_PPL  0xffc04404   /* Holds the number of pixels per line of the display */
-#define                         PIXC_LPF  0xffc04408   /* Holds the number of lines per frame of the display */
-#define                     PIXC_AHSTART  0xffc0440c   /* Contains horizontal start pixel information of the overlay data (set A) */
-#define                       PIXC_AHEND  0xffc04410   /* Contains horizontal end pixel information of the overlay data (set A) */
-#define                     PIXC_AVSTART  0xffc04414   /* Contains vertical start pixel information of the overlay data (set A) */
-#define                       PIXC_AVEND  0xffc04418   /* Contains vertical end pixel information of the overlay data (set A) */
-#define                     PIXC_ATRANSP  0xffc0441c   /* Contains the transparency ratio (set A) */
-#define                     PIXC_BHSTART  0xffc04420   /* Contains horizontal start pixel information of the overlay data (set B) */
-#define                       PIXC_BHEND  0xffc04424   /* Contains horizontal end pixel information of the overlay data (set B) */
-#define                     PIXC_BVSTART  0xffc04428   /* Contains vertical start pixel information of the overlay data (set B) */
-#define                       PIXC_BVEND  0xffc0442c   /* Contains vertical end pixel information of the overlay data (set B) */
-#define                     PIXC_BTRANSP  0xffc04430   /* Contains the transparency ratio (set B) */
-#define                    PIXC_INTRSTAT  0xffc0443c   /* Overlay interrupt configuration/status */
-#define                       PIXC_RYCON  0xffc04440   /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
-#define                       PIXC_GUCON  0xffc04444   /* Color space conversion matrix register. Contains the G/U conversion coefficients */
-#define                       PIXC_BVCON  0xffc04448   /* Color space conversion matrix register. Contains the B/V conversion coefficients */
-#define                      PIXC_CCBIAS  0xffc0444c   /* Bias values for the color space conversion matrix */
-#define                          PIXC_TC  0xffc04450   /* Holds the transparent color value */
-
-/* Handshake MDMA 0 Registers */
-
-#define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
-#define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
-#define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
-#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
-#define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
-#define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
-#define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
-
-/* Handshake MDMA 1 Registers */
-
-#define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
-#define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
-#define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
-#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
-#define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
-#define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
-#define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
-
-
-/* ********************************************************** */
-/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
-/*     and MULTI BIT READ MACROS                              */
-/* ********************************************************** */
-
-/* Bit masks for PIXC_CTL */
-
-#define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
-#define                  OVR_A_EN  0x2        /* Overlay A Enable */
-#define                  OVR_B_EN  0x4        /* Overlay B Enable */
-#define                  IMG_FORM  0x8        /* Image Data Format */
-#define                  OVR_FORM  0x10       /* Overlay Data Format */
-#define                  OUT_FORM  0x20       /* Output Data Format */
-#define                   UDS_MOD  0x40       /* Resampling Mode */
-#define                     TC_EN  0x80       /* Transparent Color Enable */
-#define                  IMG_STAT  0x300      /* Image FIFO Status */
-#define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
-#define                    WM_LVL  0x3000     /* FIFO Watermark Level */
-
-/* Bit masks for PIXC_AHSTART */
-
-#define                  A_HSTART  0xfff      /* Horizontal Start Coordinates */
-
-/* Bit masks for PIXC_AHEND */
-
-#define                    A_HEND  0xfff      /* Horizontal End Coordinates */
-
-/* Bit masks for PIXC_AVSTART */
-
-#define                  A_VSTART  0x3ff      /* Vertical Start Coordinates */
-
-/* Bit masks for PIXC_AVEND */
-
-#define                    A_VEND  0x3ff      /* Vertical End Coordinates */
-
-/* Bit masks for PIXC_ATRANSP */
-
-#define                  A_TRANSP  0xf        /* Transparency Value */
-
-/* Bit masks for PIXC_BHSTART */
-
-#define                  B_HSTART  0xfff      /* Horizontal Start Coordinates */
-
-/* Bit masks for PIXC_BHEND */
-
-#define                    B_HEND  0xfff      /* Horizontal End Coordinates */
-
-/* Bit masks for PIXC_BVSTART */
-
-#define                  B_VSTART  0x3ff      /* Vertical Start Coordinates */
-
-/* Bit masks for PIXC_BVEND */
-
-#define                    B_VEND  0x3ff      /* Vertical End Coordinates */
-
-/* Bit masks for PIXC_BTRANSP */
-
-#define                  B_TRANSP  0xf        /* Transparency Value */
-
-/* Bit masks for PIXC_INTRSTAT */
-
-#define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
-#define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
-#define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
-#define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
-
-/* Bit masks for PIXC_RYCON */
-
-#define                       A11  0x3ff      /* A11 in the Coefficient Matrix */
-#define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
-#define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
-#define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_GUCON */
-
-#define                       A21  0x3ff      /* A21 in the Coefficient Matrix */
-#define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
-#define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
-#define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_BVCON */
-
-#define                       A31  0x3ff      /* A31 in the Coefficient Matrix */
-#define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
-#define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
-#define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_CCBIAS */
-
-#define                       A14  0x3ff      /* A14 in the Bias Vector */
-#define                       A24  0xffc00    /* A24 in the Bias Vector */
-#define                       A34  0x3ff00000 /* A34 in the Bias Vector */
-
-/* Bit masks for PIXC_TC */
-
-#define                  RY_TRANS  0xff       /* Transparent Color - R/Y Component */
-#define                  GU_TRANS  0xff00     /* Transparent Color - G/U Component */
-#define                  BV_TRANS  0xff0000   /* Transparent Color - B/V Component */
-
-/* Bit masks for HOST_CONTROL */
-
-#define                   HOST_EN  0x1        /* Host Enable */
-#define                  HOST_END  0x2        /* Host Endianess */
-#define                 DATA_SIZE  0x4        /* Data Size */
-#define                  HOST_RST  0x8        /* Host Reset */
-#define                  HRDY_OVR  0x20       /* Host Ready Override */
-#define                  INT_MODE  0x40       /* Interrupt Mode */
-#define                     BT_EN  0x80       /* Bus Timeout Enable */
-#define                       EHW  0x100      /* Enable Host Write */
-#define                       EHR  0x200      /* Enable Host Read */
-#define                       BDR  0x400      /* Burst DMA Requests */
-
-/* Bit masks for HOST_STATUS */
-
-#define                 DMA_READY  0x1        /* DMA Ready */
-#define                  FIFOFULL  0x2        /* FIFO Full */
-#define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define              DMA_COMPLETE  0x8        /* DMA Complete */
-#define                      HSHK  0x10       /* Host Handshake */
-#define                 HSTIMEOUT  0x20       /* Host Timeout */
-#define                      HIRQ  0x40       /* Host Interrupt Request */
-#define                ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define                   DMA_DIR  0x100      /* DMA Direction */
-#define                       BTE  0x200      /* Bus Timeout Enabled */
-
-/* Bit masks for HOST_TIMEOUT */
-
-#define             COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
-
-/* Bit masks for KPAD_CTL */
-
-#define                   KPAD_EN  0x1        /* Keypad Enable */
-#define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
-#define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
-#define                KPAD_COLEN  0xe000     /* Column Enable Width */
-
-/* Bit masks for KPAD_PRESCALE */
-
-#define         KPAD_PRESCALE_VAL  0x3f       /* Key Prescale Value */
-
-/* Bit masks for KPAD_MSEL */
-
-#define                DBON_SCALE  0xff       /* Debounce Scale Value */
-#define              COLDRV_SCALE  0xff00     /* Column Driver Scale Value */
-
-/* Bit masks for KPAD_ROWCOL */
-
-#define                  KPAD_ROW  0xff       /* Rows Pressed */
-#define                  KPAD_COL  0xff00     /* Columns Pressed */
-
-/* Bit masks for KPAD_STAT */
-
-#define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
-#define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
-#define              KPAD_PRESSED  0x8        /* Key press current status */
-
-/* Bit masks for KPAD_SOFTEVAL */
-
-#define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
-
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
-/* Bit masks for ATAPI_CONTROL */
-
-#define                 PIO_START  0x1        /* Start PIO/Reg Op */
-#define               MULTI_START  0x2        /* Start Multi-DMA Op */
-#define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
-#define                  XFER_DIR  0x8        /* Transfer Direction */
-#define                  IORDY_EN  0x10       /* IORDY Enable */
-#define                FIFO_FLUSH  0x20       /* Flush FIFOs */
-#define                  SOFT_RST  0x40       /* Soft Reset */
-#define                   DEV_RST  0x80       /* Device Reset */
-#define                TFRCNT_RST  0x100      /* Trans Count Reset */
-#define               END_ON_TERM  0x200      /* End/Terminate Select */
-#define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
-#define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
-
-/* Bit masks for ATAPI_STATUS */
-
-#define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
-#define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
-#define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
-#define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
-
-/* Bit masks for ATAPI_DEV_ADDR */
-
-#define                  DEV_ADDR  0x1f       /* Device Address */
-
-/* Bit masks for ATAPI_INT_MASK */
-
-#define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
-#define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
-#define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
-#define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
-#define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
-#define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
-#define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
-#define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
-
-/* Bit masks for ATAPI_INT_STATUS */
-
-#define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
-#define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
-#define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
-#define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
-#define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
-#define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
-#define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
-#define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
-
-/* Bit masks for ATAPI_LINE_STATUS */
-
-#define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
-#define                ATAPI_DASP  0x2        /* Device dasp to host line status */
-#define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
-#define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
-#define                ATAPI_ADDR  0x70       /* ATAPI address line status */
-#define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
-#define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
-#define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
-#define               ATAPI_DIORN  0x400      /* ATAPI read line status */
-#define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_SM_STATE */
-
-#define                PIO_CSTATE  0xf        /* PIO mode state machine current state */
-#define                DMA_CSTATE  0xf0       /* DMA mode state machine current state */
-#define             UDMAIN_CSTATE  0xf00      /* Ultra DMA-In mode state machine current state */
-#define            UDMAOUT_CSTATE  0xf000     /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_TERMINATE */
-
-#define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
-
-/* Bit masks for ATAPI_REG_TIM_0 */
-
-#define                    T2_REG  0xff       /* End of cycle time for register access transfers */
-#define                  TEOC_REG  0xff00     /* Selects DIOR/DIOW pulsewidth */
-
-/* Bit masks for ATAPI_PIO_TIM_0 */
-
-#define                    T1_REG  0xf        /* Time from address valid to DIOR/DIOW */
-#define                T2_REG_PIO  0xff0      /* DIOR/DIOW pulsewidth */
-#define                    T4_REG  0xf000     /* DIOW data hold */
-
-/* Bit masks for ATAPI_PIO_TIM_1 */
-
-#define              TEOC_REG_PIO  0xff       /* End of cycle time for PIO access transfers. */
-
-/* Bit masks for ATAPI_MULTI_TIM_0 */
-
-#define                        TD  0xff       /* DIOR/DIOW asserted pulsewidth */
-#define                        TM  0xff00     /* Time from address valid to DIOR/DIOW */
-
-/* Bit masks for ATAPI_MULTI_TIM_1 */
-
-#define                       TKW  0xff       /* Selects DIOW negated pulsewidth */
-#define                       TKR  0xff00     /* Selects DIOR negated pulsewidth */
-
-/* Bit masks for ATAPI_MULTI_TIM_2 */
-
-#define                        TH  0xff       /* Selects DIOW data hold */
-#define                      TEOC  0xff00     /* Selects end of cycle for DMA */
-
-/* Bit masks for ATAPI_ULTRA_TIM_0 */
-
-#define                      TACK  0xff       /* Selects setup and hold times for TACK */
-#define                      TENV  0xff00     /* Selects envelope time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_1 */
-
-#define                      TDVS  0xff       /* Selects data valid setup time */
-#define                 TCYC_TDVS  0xff00     /* Selects cycle time - TDVS time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_2 */
-
-#define                       TSS  0xff       /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
-#define                      TMLI  0xff00     /* Selects interlock time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_3 */
-
-#define                      TZAH  0xff       /* Selects minimum delay required for output */
-#define               READY_PAUSE  0xff00     /* Selects ready to pause */
-
-/* Bit masks for TIMER_ENABLE1 */
-
-#define                    TIMEN8  0x1        /* Timer 8 Enable */
-#define                    TIMEN9  0x2        /* Timer 9 Enable */
-#define                   TIMEN10  0x4        /* Timer 10 Enable */
-
-/* Bit masks for TIMER_DISABLE1 */
-
-#define                   TIMDIS8  0x1        /* Timer 8 Disable */
-#define                   TIMDIS9  0x2        /* Timer 9 Disable */
-#define                  TIMDIS10  0x4        /* Timer 10 Disable */
-
-/* Bit masks for TIMER_STATUS1 */
-
-#define                    TIMIL8  0x1        /* Timer 8 Interrupt */
-#define                    TIMIL9  0x2        /* Timer 9 Interrupt */
-#define                   TIMIL10  0x4        /* Timer 10 Interrupt */
-#define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
-#define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
-#define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
-#define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
-#define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
-#define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
-
-/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
-
-/* Bit masks for USB_FADDR */
-
-#define          FUNCTION_ADDRESS  0x7f       /* Function address */
-
-/* Bit masks for USB_POWER */
-
-#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
-#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
-#define               RESUME_MODE  0x4        /* DMA Mode */
-#define                     RESET  0x8        /* Reset indicator */
-#define                   HS_MODE  0x10       /* High Speed mode indicator */
-#define                 HS_ENABLE  0x20       /* high Speed Enable */
-#define                 SOFT_CONN  0x40       /* Soft connect */
-#define                ISO_UPDATE  0x80       /* Isochronous update */
-
-/* Bit masks for USB_INTRTX */
-
-#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
-#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
-#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
-#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
-#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
-#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
-#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
-#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRRX */
-
-#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
-#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
-#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
-#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
-#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
-#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
-#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRTXE */
-
-#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
-#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
-#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
-#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
-#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
-#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
-#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
-#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
-
-/* Bit masks for USB_INTRRXE */
-
-#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
-#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
-#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
-#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
-#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
-#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
-#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
-
-/* Bit masks for USB_INTRUSB */
-
-#define                 SUSPEND_B  0x1        /* Suspend indicator */
-#define                  RESUME_B  0x2        /* Resume indicator */
-#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
-#define                     SOF_B  0x8        /* Start of frame */
-#define                    CONN_B  0x10       /* Connection indicator */
-#define                  DISCON_B  0x20       /* Disconnect indicator */
-#define             SESSION_REQ_B  0x40       /* Session Request */
-#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
-
-/* Bit masks for USB_INTRUSBE */
-
-#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
-#define                 RESUME_BE  0x2        /* Resume indicator int enable */
-#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
-#define                    SOF_BE  0x8        /* Start of frame int enable */
-#define                   CONN_BE  0x10       /* Connection indicator int enable */
-#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
-#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
-#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
-
-/* Bit masks for USB_FRAME */
-
-#define              FRAME_NUMBER  0x7ff      /* Frame number */
-
-/* Bit masks for USB_INDEX */
-
-#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
-
-/* Bit masks for USB_GLOBAL_CTL */
-
-#define                GLOBAL_ENA  0x1        /* enables USB module */
-#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
-#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
-#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
-#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
-#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
-#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
-#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
-#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
-#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
-#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
-#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
-#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
-#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
-#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
-
-/* Bit masks for USB_OTG_DEV_CTL */
-
-#define                   SESSION  0x1        /* session indicator */
-#define                  HOST_REQ  0x2        /* Host negotiation request */
-#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
-#define                     VBUS0  0x8        /* Vbus level indicator[0] */
-#define                     VBUS1  0x10       /* Vbus level indicator[1] */
-#define                     LSDEV  0x20       /* Low-speed indicator */
-#define                     FSDEV  0x40       /* Full or High-speed indicator */
-#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
-
-/* Bit masks for USB_OTG_VBUS_IRQ */
-
-#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
-#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
-#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
-#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
-#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
-#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
-
-/* Bit masks for USB_OTG_VBUS_MASK */
-
-#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
-#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
-#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
-#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
-#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
-#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
-
-/* Bit masks for USB_CSR0 */
-
-#define                  RXPKTRDY  0x1        /* data packet receive indicator */
-#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
-#define                STALL_SENT  0x4        /* STALL handshake sent */
-#define                   DATAEND  0x8        /* Data end indicator */
-#define                  SETUPEND  0x10       /* Setup end */
-#define                 SENDSTALL  0x20       /* Send STALL handshake */
-#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
-#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
-#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
-#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
-#define                SETUPPKT_H  0x8        /* send Setup token host mode */
-#define                   ERROR_H  0x10       /* timeout error indicator host mode */
-#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
-#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
-#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
-
-/* Bit masks for USB_COUNT0 */
-
-#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
-
-/* Bit masks for USB_NAKLIMIT0 */
-
-#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
-
-/* Bit masks for USB_TX_MAX_PACKET */
-
-#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
-
-/* Bit masks for USB_RX_MAX_PACKET */
-
-#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
-
-/* Bit masks for USB_TXCSR */
-
-#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
-#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
-#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
-#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
-#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
-#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
-#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
-#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
-#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
-#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
-#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
-#define                     ISO_T  0x4000     /* enable Isochronous transfers */
-#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
-#define                  ERROR_TH  0x4        /* error condition host mode */
-#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
-#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
-
-/* Bit masks for USB_TXCOUNT */
-
-#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* Bit masks for USB_RXCSR */
-
-#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
-#define               FIFO_FULL_R  0x2        /* FIFO not empty */
-#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
-#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
-#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
-#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
-#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
-#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
-#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
-#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
-#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
-#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
-#define                     ISO_R  0x4000     /* enable Isochronous transfers */
-#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
-#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
-#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
-#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
-#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
-#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
-#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
-
-/* Bit masks for USB_RXCOUNT */
-
-#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
-
-/* Bit masks for USB_TXTYPE */
-
-#define            TARGET_EP_NO_T  0xf        /* EP number */
-#define                PROTOCOL_T  0xc        /* transfer type */
-
-/* Bit masks for USB_TXINTERVAL */
-
-#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
-
-/* Bit masks for USB_RXTYPE */
-
-#define            TARGET_EP_NO_R  0xf        /* EP number */
-#define                PROTOCOL_R  0xc        /* transfer type */
-
-/* Bit masks for USB_RXINTERVAL */
-
-#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
-
-/* Bit masks for USB_DMA_INTERRUPT */
-
-#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
-#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
-#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
-#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
-#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
-#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
-#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
-#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
-
-/* Bit masks for USB_DMAxCONTROL */
-
-#define                   DMA_ENA  0x1        /* DMA enable */
-#define                 DIRECTION  0x2        /* direction of DMA transfer */
-#define                      MODE  0x4        /* DMA Bus error */
-#define                   INT_ENA  0x8        /* Interrupt enable */
-#define                     EPNUM  0xf0       /* EP number */
-#define                  BUSERROR  0x100      /* DMA Bus error */
-
-/* Bit masks for USB_DMAxADDRHIGH */
-
-#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxADDRLOW */
-
-#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTHIGH */
-
-#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTLOW */
-
-#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for HMDMAx_CONTROL */
-
-#define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
-#define                       REP  0x2        /* Handshake MDMA Request Polarity */
-#define                       UTE  0x8        /* Urgency Threshold Enable */
-#define                       OIE  0x10       /* Overflow Interrupt Enable */
-#define                      BDIE  0x20       /* Block Done Interrupt Enable */
-#define                      MBDI  0x40       /* Mask Block Done Interrupt */
-#define                       DRQ  0x300      /* Handshake MDMA Request Type */
-#define                       RBC  0x1000     /* Force Reload of BCOUNT */
-#define                        PS  0x2000     /* Pin Status */
-#define                        OI  0x4000     /* Overflow Interrupt Generated */
-#define                       BDI  0x8000     /* Block Done Interrupt Generated */
-
-/* ******************************************* */
-/*     MULTI BIT MACRO ENUMERATIONS            */
-/* ******************************************* */
-
-
 #endif /* _DEF_BF548_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
index f7f0435..5a04e6d 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -10,121 +10,13 @@
 /* Include all Core registers and bit definitions */
 #include <asm/def_LPBlackfin.h>
 
-
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
 
 /* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
 #include "defBF54x_base.h"
 
-/* The following are the #defines needed by ADSP-BF549 that are not in the common header */
-
-/* Timer Registers */
-
-#define                    TIMER8_CONFIG  0xffc00600   /* Timer 8 Configuration Register */
-#define                   TIMER8_COUNTER  0xffc00604   /* Timer 8 Counter Register */
-#define                    TIMER8_PERIOD  0xffc00608   /* Timer 8 Period Register */
-#define                     TIMER8_WIDTH  0xffc0060c   /* Timer 8 Width Register */
-#define                    TIMER9_CONFIG  0xffc00610   /* Timer 9 Configuration Register */
-#define                   TIMER9_COUNTER  0xffc00614   /* Timer 9 Counter Register */
-#define                    TIMER9_PERIOD  0xffc00618   /* Timer 9 Period Register */
-#define                     TIMER9_WIDTH  0xffc0061c   /* Timer 9 Width Register */
-#define                   TIMER10_CONFIG  0xffc00620   /* Timer 10 Configuration Register */
-#define                  TIMER10_COUNTER  0xffc00624   /* Timer 10 Counter Register */
-#define                   TIMER10_PERIOD  0xffc00628   /* Timer 10 Period Register */
-#define                    TIMER10_WIDTH  0xffc0062c   /* Timer 10 Width Register */
-
-/* Timer Group of 3 Registers */
-
-#define                    TIMER_ENABLE1  0xffc00640   /* Timer Group of 3 Enable Register */
-#define                   TIMER_DISABLE1  0xffc00644   /* Timer Group of 3 Disable Register */
-#define                    TIMER_STATUS1  0xffc00648   /* Timer Group of 3 Status Register */
-
-/* SPORT0 Registers */
-
-#define                      SPORT0_TCR1  0xffc00800   /* SPORT0 Transmit Configuration 1 Register */
-#define                      SPORT0_TCR2  0xffc00804   /* SPORT0 Transmit Configuration 2 Register */
-#define                   SPORT0_TCLKDIV  0xffc00808   /* SPORT0 Transmit Serial Clock Divider Register */
-#define                    SPORT0_TFSDIV  0xffc0080c   /* SPORT0 Transmit Frame Sync Divider Register */
-#define                        SPORT0_TX  0xffc00810   /* SPORT0 Transmit Data Register */
-#define                        SPORT0_RX  0xffc00818   /* SPORT0 Receive Data Register */
-#define                      SPORT0_RCR1  0xffc00820   /* SPORT0 Receive Configuration 1 Register */
-#define                      SPORT0_RCR2  0xffc00824   /* SPORT0 Receive Configuration 2 Register */
-#define                   SPORT0_RCLKDIV  0xffc00828   /* SPORT0 Receive Serial Clock Divider Register */
-#define                    SPORT0_RFSDIV  0xffc0082c   /* SPORT0 Receive Frame Sync Divider Register */
-#define                      SPORT0_STAT  0xffc00830   /* SPORT0 Status Register */
-#define                      SPORT0_CHNL  0xffc00834   /* SPORT0 Current Channel Register */
-#define                     SPORT0_MCMC1  0xffc00838   /* SPORT0 Multi channel Configuration Register 1 */
-#define                     SPORT0_MCMC2  0xffc0083c   /* SPORT0 Multi channel Configuration Register 2 */
-#define                     SPORT0_MTCS0  0xffc00840   /* SPORT0 Multi channel Transmit Select Register 0 */
-#define                     SPORT0_MTCS1  0xffc00844   /* SPORT0 Multi channel Transmit Select Register 1 */
-#define                     SPORT0_MTCS2  0xffc00848   /* SPORT0 Multi channel Transmit Select Register 2 */
-#define                     SPORT0_MTCS3  0xffc0084c   /* SPORT0 Multi channel Transmit Select Register 3 */
-#define                     SPORT0_MRCS0  0xffc00850   /* SPORT0 Multi channel Receive Select Register 0 */
-#define                     SPORT0_MRCS1  0xffc00854   /* SPORT0 Multi channel Receive Select Register 1 */
-#define                     SPORT0_MRCS2  0xffc00858   /* SPORT0 Multi channel Receive Select Register 2 */
-#define                     SPORT0_MRCS3  0xffc0085c   /* SPORT0 Multi channel Receive Select Register 3 */
-
-/* EPPI0 Registers */
-
-#define                     EPPI0_STATUS  0xffc01000   /* EPPI0 Status Register */
-#define                     EPPI0_HCOUNT  0xffc01004   /* EPPI0 Horizontal Transfer Count Register */
-#define                     EPPI0_HDELAY  0xffc01008   /* EPPI0 Horizontal Delay Count Register */
-#define                     EPPI0_VCOUNT  0xffc0100c   /* EPPI0 Vertical Transfer Count Register */
-#define                     EPPI0_VDELAY  0xffc01010   /* EPPI0 Vertical Delay Count Register */
-#define                      EPPI0_FRAME  0xffc01014   /* EPPI0 Lines per Frame Register */
-#define                       EPPI0_LINE  0xffc01018   /* EPPI0 Samples per Line Register */
-#define                     EPPI0_CLKDIV  0xffc0101c   /* EPPI0 Clock Divide Register */
-#define                    EPPI0_CONTROL  0xffc01020   /* EPPI0 Control Register */
-#define                   EPPI0_FS1W_HBL  0xffc01024   /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
-#define                  EPPI0_FS1P_AVPL  0xffc01028   /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
-#define                   EPPI0_FS2W_LVB  0xffc0102c   /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
-#define                  EPPI0_FS2P_LAVF  0xffc01030   /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
-#define                       EPPI0_CLIP  0xffc01034   /* EPPI0 Clipping Register */
-
-/* UART2 Registers */
-
-#define                        UART2_DLL  0xffc02100   /* Divisor Latch Low Byte */
-#define                        UART2_DLH  0xffc02104   /* Divisor Latch High Byte */
-#define                       UART2_GCTL  0xffc02108   /* Global Control Register */
-#define                        UART2_LCR  0xffc0210c   /* Line Control Register */
-#define                        UART2_MCR  0xffc02110   /* Modem Control Register */
-#define                        UART2_LSR  0xffc02114   /* Line Status Register */
-#define                        UART2_MSR  0xffc02118   /* Modem Status Register */
-#define                        UART2_SCR  0xffc0211c   /* Scratch Register */
-#define                    UART2_IER_SET  0xffc02120   /* Interrupt Enable Register Set */
-#define                  UART2_IER_CLEAR  0xffc02124   /* Interrupt Enable Register Clear */
-#define                        UART2_RBR  0xffc0212c   /* Receive Buffer Register */
-
-/* Two Wire Interface Registers (TWI1) */
-
-#define                     TWI1_REGBASE  0xffc02200
-#define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
-#define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
-#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
-#define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
-#define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
-#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
-#define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
-#define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
-#define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
-#define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
-#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
-#define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
-#define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
-#define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
-#define                   TWI1_RCV_DATA8  0xffc02288   /* TWI FIFO Receive Data Single Byte Register */
-#define                  TWI1_RCV_DATA16  0xffc0228c   /* TWI FIFO Receive Data Double Byte Register */
-
-/* SPI2  Registers */
-
-#define                     SPI2_REGBASE  0xffc02400
-#define                         SPI2_CTL  0xffc02400   /* SPI2 Control Register */
-#define                         SPI2_FLG  0xffc02404   /* SPI2 Flag Register */
-#define                        SPI2_STAT  0xffc02408   /* SPI2 Status Register */
-#define                        SPI2_TDBR  0xffc0240c   /* SPI2 Transmit Data Buffer Register */
-#define                        SPI2_RDBR  0xffc02410   /* SPI2 Receive Data Buffer Register */
-#define                        SPI2_BAUD  0xffc02414   /* SPI2 Baud Rate Register */
-#define                      SPI2_SHADOW  0xffc02418   /* SPI2 Receive Data Buffer Shadow Register */
+/* The BF549 is like the BF544, but has MXVR */
+#include "defBF547.h"
 
 /* MXVR Registers */
 
@@ -296,2418 +188,4 @@
 #define                     MXVR_PIN_CTL  0xffc028dc   /* MXVR Pin Control Register */
 #define                    MXVR_SCLK_CNT  0xffc028e0   /* MXVR System Clock Counter Register */
 
-/* CAN Controller 1 Config 1 Registers */
-
-#define                         CAN1_MC1  0xffc03200   /* CAN Controller 1 Mailbox Configuration Register 1 */
-#define                         CAN1_MD1  0xffc03204   /* CAN Controller 1 Mailbox Direction Register 1 */
-#define                        CAN1_TRS1  0xffc03208   /* CAN Controller 1 Transmit Request Set Register 1 */
-#define                        CAN1_TRR1  0xffc0320c   /* CAN Controller 1 Transmit Request Reset Register 1 */
-#define                         CAN1_TA1  0xffc03210   /* CAN Controller 1 Transmit Acknowledge Register 1 */
-#define                         CAN1_AA1  0xffc03214   /* CAN Controller 1 Abort Acknowledge Register 1 */
-#define                        CAN1_RMP1  0xffc03218   /* CAN Controller 1 Receive Message Pending Register 1 */
-#define                        CAN1_RML1  0xffc0321c   /* CAN Controller 1 Receive Message Lost Register 1 */
-#define                      CAN1_MBTIF1  0xffc03220   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */
-#define                      CAN1_MBRIF1  0xffc03224   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */
-#define                       CAN1_MBIM1  0xffc03228   /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */
-#define                        CAN1_RFH1  0xffc0322c   /* CAN Controller 1 Remote Frame Handling Enable Register 1 */
-#define                       CAN1_OPSS1  0xffc03230   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */
-
-/* CAN Controller 1 Config 2 Registers */
-
-#define                         CAN1_MC2  0xffc03240   /* CAN Controller 1 Mailbox Configuration Register 2 */
-#define                         CAN1_MD2  0xffc03244   /* CAN Controller 1 Mailbox Direction Register 2 */
-#define                        CAN1_TRS2  0xffc03248   /* CAN Controller 1 Transmit Request Set Register 2 */
-#define                        CAN1_TRR2  0xffc0324c   /* CAN Controller 1 Transmit Request Reset Register 2 */
-#define                         CAN1_TA2  0xffc03250   /* CAN Controller 1 Transmit Acknowledge Register 2 */
-#define                         CAN1_AA2  0xffc03254   /* CAN Controller 1 Abort Acknowledge Register 2 */
-#define                        CAN1_RMP2  0xffc03258   /* CAN Controller 1 Receive Message Pending Register 2 */
-#define                        CAN1_RML2  0xffc0325c   /* CAN Controller 1 Receive Message Lost Register 2 */
-#define                      CAN1_MBTIF2  0xffc03260   /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */
-#define                      CAN1_MBRIF2  0xffc03264   /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */
-#define                       CAN1_MBIM2  0xffc03268   /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */
-#define                        CAN1_RFH2  0xffc0326c   /* CAN Controller 1 Remote Frame Handling Enable Register 2 */
-#define                       CAN1_OPSS2  0xffc03270   /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */
-
-/* CAN Controller 1 Clock/Interrupt/Counter Registers */
-
-#define                       CAN1_CLOCK  0xffc03280   /* CAN Controller 1 Clock Register */
-#define                      CAN1_TIMING  0xffc03284   /* CAN Controller 1 Timing Register */
-#define                       CAN1_DEBUG  0xffc03288   /* CAN Controller 1 Debug Register */
-#define                      CAN1_STATUS  0xffc0328c   /* CAN Controller 1 Global Status Register */
-#define                         CAN1_CEC  0xffc03290   /* CAN Controller 1 Error Counter Register */
-#define                         CAN1_GIS  0xffc03294   /* CAN Controller 1 Global Interrupt Status Register */
-#define                         CAN1_GIM  0xffc03298   /* CAN Controller 1 Global Interrupt Mask Register */
-#define                         CAN1_GIF  0xffc0329c   /* CAN Controller 1 Global Interrupt Flag Register */
-#define                     CAN1_CONTROL  0xffc032a0   /* CAN Controller 1 Master Control Register */
-#define                        CAN1_INTR  0xffc032a4   /* CAN Controller 1 Interrupt Pending Register */
-#define                        CAN1_MBTD  0xffc032ac   /* CAN Controller 1 Mailbox Temporary Disable Register */
-#define                         CAN1_EWR  0xffc032b0   /* CAN Controller 1 Programmable Warning Level Register */
-#define                         CAN1_ESR  0xffc032b4   /* CAN Controller 1 Error Status Register */
-#define                       CAN1_UCCNT  0xffc032c4   /* CAN Controller 1 Universal Counter Register */
-#define                        CAN1_UCRC  0xffc032c8   /* CAN Controller 1 Universal Counter Force Reload Register */
-#define                       CAN1_UCCNF  0xffc032cc   /* CAN Controller 1 Universal Counter Configuration Register */
-
-/* CAN Controller 1 Mailbox Acceptance Registers */
-
-#define                       CAN1_AM00L  0xffc03300   /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */
-#define                       CAN1_AM00H  0xffc03304   /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */
-#define                       CAN1_AM01L  0xffc03308   /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */
-#define                       CAN1_AM01H  0xffc0330c   /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */
-#define                       CAN1_AM02L  0xffc03310   /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */
-#define                       CAN1_AM02H  0xffc03314   /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */
-#define                       CAN1_AM03L  0xffc03318   /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */
-#define                       CAN1_AM03H  0xffc0331c   /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */
-#define                       CAN1_AM04L  0xffc03320   /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */
-#define                       CAN1_AM04H  0xffc03324   /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */
-#define                       CAN1_AM05L  0xffc03328   /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */
-#define                       CAN1_AM05H  0xffc0332c   /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */
-#define                       CAN1_AM06L  0xffc03330   /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */
-#define                       CAN1_AM06H  0xffc03334   /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */
-#define                       CAN1_AM07L  0xffc03338   /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */
-#define                       CAN1_AM07H  0xffc0333c   /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */
-#define                       CAN1_AM08L  0xffc03340   /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */
-#define                       CAN1_AM08H  0xffc03344   /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */
-#define                       CAN1_AM09L  0xffc03348   /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */
-#define                       CAN1_AM09H  0xffc0334c   /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */
-#define                       CAN1_AM10L  0xffc03350   /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */
-#define                       CAN1_AM10H  0xffc03354   /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */
-#define                       CAN1_AM11L  0xffc03358   /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */
-#define                       CAN1_AM11H  0xffc0335c   /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */
-#define                       CAN1_AM12L  0xffc03360   /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */
-#define                       CAN1_AM12H  0xffc03364   /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */
-#define                       CAN1_AM13L  0xffc03368   /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */
-#define                       CAN1_AM13H  0xffc0336c   /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */
-#define                       CAN1_AM14L  0xffc03370   /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */
-#define                       CAN1_AM14H  0xffc03374   /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */
-#define                       CAN1_AM15L  0xffc03378   /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */
-#define                       CAN1_AM15H  0xffc0337c   /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */
-
-/* CAN Controller 1 Mailbox Acceptance Registers */
-
-#define                       CAN1_AM16L  0xffc03380   /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */
-#define                       CAN1_AM16H  0xffc03384   /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */
-#define                       CAN1_AM17L  0xffc03388   /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */
-#define                       CAN1_AM17H  0xffc0338c   /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */
-#define                       CAN1_AM18L  0xffc03390   /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */
-#define                       CAN1_AM18H  0xffc03394   /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */
-#define                       CAN1_AM19L  0xffc03398   /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */
-#define                       CAN1_AM19H  0xffc0339c   /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */
-#define                       CAN1_AM20L  0xffc033a0   /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */
-#define                       CAN1_AM20H  0xffc033a4   /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */
-#define                       CAN1_AM21L  0xffc033a8   /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */
-#define                       CAN1_AM21H  0xffc033ac   /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */
-#define                       CAN1_AM22L  0xffc033b0   /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */
-#define                       CAN1_AM22H  0xffc033b4   /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */
-#define                       CAN1_AM23L  0xffc033b8   /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */
-#define                       CAN1_AM23H  0xffc033bc   /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */
-#define                       CAN1_AM24L  0xffc033c0   /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */
-#define                       CAN1_AM24H  0xffc033c4   /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */
-#define                       CAN1_AM25L  0xffc033c8   /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */
-#define                       CAN1_AM25H  0xffc033cc   /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */
-#define                       CAN1_AM26L  0xffc033d0   /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */
-#define                       CAN1_AM26H  0xffc033d4   /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */
-#define                       CAN1_AM27L  0xffc033d8   /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */
-#define                       CAN1_AM27H  0xffc033dc   /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */
-#define                       CAN1_AM28L  0xffc033e0   /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */
-#define                       CAN1_AM28H  0xffc033e4   /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */
-#define                       CAN1_AM29L  0xffc033e8   /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */
-#define                       CAN1_AM29H  0xffc033ec   /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */
-#define                       CAN1_AM30L  0xffc033f0   /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */
-#define                       CAN1_AM30H  0xffc033f4   /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */
-#define                       CAN1_AM31L  0xffc033f8   /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */
-#define                       CAN1_AM31H  0xffc033fc   /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */
-
-/* CAN Controller 1 Mailbox Data Registers */
-
-#define                  CAN1_MB00_DATA0  0xffc03400   /* CAN Controller 1 Mailbox 0 Data 0 Register */
-#define                  CAN1_MB00_DATA1  0xffc03404   /* CAN Controller 1 Mailbox 0 Data 1 Register */
-#define                  CAN1_MB00_DATA2  0xffc03408   /* CAN Controller 1 Mailbox 0 Data 2 Register */
-#define                  CAN1_MB00_DATA3  0xffc0340c   /* CAN Controller 1 Mailbox 0 Data 3 Register */
-#define                 CAN1_MB00_LENGTH  0xffc03410   /* CAN Controller 1 Mailbox 0 Length Register */
-#define              CAN1_MB00_TIMESTAMP  0xffc03414   /* CAN Controller 1 Mailbox 0 Timestamp Register */
-#define                    CAN1_MB00_ID0  0xffc03418   /* CAN Controller 1 Mailbox 0 ID0 Register */
-#define                    CAN1_MB00_ID1  0xffc0341c   /* CAN Controller 1 Mailbox 0 ID1 Register */
-#define                  CAN1_MB01_DATA0  0xffc03420   /* CAN Controller 1 Mailbox 1 Data 0 Register */
-#define                  CAN1_MB01_DATA1  0xffc03424   /* CAN Controller 1 Mailbox 1 Data 1 Register */
-#define                  CAN1_MB01_DATA2  0xffc03428   /* CAN Controller 1 Mailbox 1 Data 2 Register */
-#define                  CAN1_MB01_DATA3  0xffc0342c   /* CAN Controller 1 Mailbox 1 Data 3 Register */
-#define                 CAN1_MB01_LENGTH  0xffc03430   /* CAN Controller 1 Mailbox 1 Length Register */
-#define              CAN1_MB01_TIMESTAMP  0xffc03434   /* CAN Controller 1 Mailbox 1 Timestamp Register */
-#define                    CAN1_MB01_ID0  0xffc03438   /* CAN Controller 1 Mailbox 1 ID0 Register */
-#define                    CAN1_MB01_ID1  0xffc0343c   /* CAN Controller 1 Mailbox 1 ID1 Register */
-#define                  CAN1_MB02_DATA0  0xffc03440   /* CAN Controller 1 Mailbox 2 Data 0 Register */
-#define                  CAN1_MB02_DATA1  0xffc03444   /* CAN Controller 1 Mailbox 2 Data 1 Register */
-#define                  CAN1_MB02_DATA2  0xffc03448   /* CAN Controller 1 Mailbox 2 Data 2 Register */
-#define                  CAN1_MB02_DATA3  0xffc0344c   /* CAN Controller 1 Mailbox 2 Data 3 Register */
-#define                 CAN1_MB02_LENGTH  0xffc03450   /* CAN Controller 1 Mailbox 2 Length Register */
-#define              CAN1_MB02_TIMESTAMP  0xffc03454   /* CAN Controller 1 Mailbox 2 Timestamp Register */
-#define                    CAN1_MB02_ID0  0xffc03458   /* CAN Controller 1 Mailbox 2 ID0 Register */
-#define                    CAN1_MB02_ID1  0xffc0345c   /* CAN Controller 1 Mailbox 2 ID1 Register */
-#define                  CAN1_MB03_DATA0  0xffc03460   /* CAN Controller 1 Mailbox 3 Data 0 Register */
-#define                  CAN1_MB03_DATA1  0xffc03464   /* CAN Controller 1 Mailbox 3 Data 1 Register */
-#define                  CAN1_MB03_DATA2  0xffc03468   /* CAN Controller 1 Mailbox 3 Data 2 Register */
-#define                  CAN1_MB03_DATA3  0xffc0346c   /* CAN Controller 1 Mailbox 3 Data 3 Register */
-#define                 CAN1_MB03_LENGTH  0xffc03470   /* CAN Controller 1 Mailbox 3 Length Register */
-#define              CAN1_MB03_TIMESTAMP  0xffc03474   /* CAN Controller 1 Mailbox 3 Timestamp Register */
-#define                    CAN1_MB03_ID0  0xffc03478   /* CAN Controller 1 Mailbox 3 ID0 Register */
-#define                    CAN1_MB03_ID1  0xffc0347c   /* CAN Controller 1 Mailbox 3 ID1 Register */
-#define                  CAN1_MB04_DATA0  0xffc03480   /* CAN Controller 1 Mailbox 4 Data 0 Register */
-#define                  CAN1_MB04_DATA1  0xffc03484   /* CAN Controller 1 Mailbox 4 Data 1 Register */
-#define                  CAN1_MB04_DATA2  0xffc03488   /* CAN Controller 1 Mailbox 4 Data 2 Register */
-#define                  CAN1_MB04_DATA3  0xffc0348c   /* CAN Controller 1 Mailbox 4 Data 3 Register */
-#define                 CAN1_MB04_LENGTH  0xffc03490   /* CAN Controller 1 Mailbox 4 Length Register */
-#define              CAN1_MB04_TIMESTAMP  0xffc03494   /* CAN Controller 1 Mailbox 4 Timestamp Register */
-#define                    CAN1_MB04_ID0  0xffc03498   /* CAN Controller 1 Mailbox 4 ID0 Register */
-#define                    CAN1_MB04_ID1  0xffc0349c   /* CAN Controller 1 Mailbox 4 ID1 Register */
-#define                  CAN1_MB05_DATA0  0xffc034a0   /* CAN Controller 1 Mailbox 5 Data 0 Register */
-#define                  CAN1_MB05_DATA1  0xffc034a4   /* CAN Controller 1 Mailbox 5 Data 1 Register */
-#define                  CAN1_MB05_DATA2  0xffc034a8   /* CAN Controller 1 Mailbox 5 Data 2 Register */
-#define                  CAN1_MB05_DATA3  0xffc034ac   /* CAN Controller 1 Mailbox 5 Data 3 Register */
-#define                 CAN1_MB05_LENGTH  0xffc034b0   /* CAN Controller 1 Mailbox 5 Length Register */
-#define              CAN1_MB05_TIMESTAMP  0xffc034b4   /* CAN Controller 1 Mailbox 5 Timestamp Register */
-#define                    CAN1_MB05_ID0  0xffc034b8   /* CAN Controller 1 Mailbox 5 ID0 Register */
-#define                    CAN1_MB05_ID1  0xffc034bc   /* CAN Controller 1 Mailbox 5 ID1 Register */
-#define                  CAN1_MB06_DATA0  0xffc034c0   /* CAN Controller 1 Mailbox 6 Data 0 Register */
-#define                  CAN1_MB06_DATA1  0xffc034c4   /* CAN Controller 1 Mailbox 6 Data 1 Register */
-#define                  CAN1_MB06_DATA2  0xffc034c8   /* CAN Controller 1 Mailbox 6 Data 2 Register */
-#define                  CAN1_MB06_DATA3  0xffc034cc   /* CAN Controller 1 Mailbox 6 Data 3 Register */
-#define                 CAN1_MB06_LENGTH  0xffc034d0   /* CAN Controller 1 Mailbox 6 Length Register */
-#define              CAN1_MB06_TIMESTAMP  0xffc034d4   /* CAN Controller 1 Mailbox 6 Timestamp Register */
-#define                    CAN1_MB06_ID0  0xffc034d8   /* CAN Controller 1 Mailbox 6 ID0 Register */
-#define                    CAN1_MB06_ID1  0xffc034dc   /* CAN Controller 1 Mailbox 6 ID1 Register */
-#define                  CAN1_MB07_DATA0  0xffc034e0   /* CAN Controller 1 Mailbox 7 Data 0 Register */
-#define                  CAN1_MB07_DATA1  0xffc034e4   /* CAN Controller 1 Mailbox 7 Data 1 Register */
-#define                  CAN1_MB07_DATA2  0xffc034e8   /* CAN Controller 1 Mailbox 7 Data 2 Register */
-#define                  CAN1_MB07_DATA3  0xffc034ec   /* CAN Controller 1 Mailbox 7 Data 3 Register */
-#define                 CAN1_MB07_LENGTH  0xffc034f0   /* CAN Controller 1 Mailbox 7 Length Register */
-#define              CAN1_MB07_TIMESTAMP  0xffc034f4   /* CAN Controller 1 Mailbox 7 Timestamp Register */
-#define                    CAN1_MB07_ID0  0xffc034f8   /* CAN Controller 1 Mailbox 7 ID0 Register */
-#define                    CAN1_MB07_ID1  0xffc034fc   /* CAN Controller 1 Mailbox 7 ID1 Register */
-#define                  CAN1_MB08_DATA0  0xffc03500   /* CAN Controller 1 Mailbox 8 Data 0 Register */
-#define                  CAN1_MB08_DATA1  0xffc03504   /* CAN Controller 1 Mailbox 8 Data 1 Register */
-#define                  CAN1_MB08_DATA2  0xffc03508   /* CAN Controller 1 Mailbox 8 Data 2 Register */
-#define                  CAN1_MB08_DATA3  0xffc0350c   /* CAN Controller 1 Mailbox 8 Data 3 Register */
-#define                 CAN1_MB08_LENGTH  0xffc03510   /* CAN Controller 1 Mailbox 8 Length Register */
-#define              CAN1_MB08_TIMESTAMP  0xffc03514   /* CAN Controller 1 Mailbox 8 Timestamp Register */
-#define                    CAN1_MB08_ID0  0xffc03518   /* CAN Controller 1 Mailbox 8 ID0 Register */
-#define                    CAN1_MB08_ID1  0xffc0351c   /* CAN Controller 1 Mailbox 8 ID1 Register */
-#define                  CAN1_MB09_DATA0  0xffc03520   /* CAN Controller 1 Mailbox 9 Data 0 Register */
-#define                  CAN1_MB09_DATA1  0xffc03524   /* CAN Controller 1 Mailbox 9 Data 1 Register */
-#define                  CAN1_MB09_DATA2  0xffc03528   /* CAN Controller 1 Mailbox 9 Data 2 Register */
-#define                  CAN1_MB09_DATA3  0xffc0352c   /* CAN Controller 1 Mailbox 9 Data 3 Register */
-#define                 CAN1_MB09_LENGTH  0xffc03530   /* CAN Controller 1 Mailbox 9 Length Register */
-#define              CAN1_MB09_TIMESTAMP  0xffc03534   /* CAN Controller 1 Mailbox 9 Timestamp Register */
-#define                    CAN1_MB09_ID0  0xffc03538   /* CAN Controller 1 Mailbox 9 ID0 Register */
-#define                    CAN1_MB09_ID1  0xffc0353c   /* CAN Controller 1 Mailbox 9 ID1 Register */
-#define                  CAN1_MB10_DATA0  0xffc03540   /* CAN Controller 1 Mailbox 10 Data 0 Register */
-#define                  CAN1_MB10_DATA1  0xffc03544   /* CAN Controller 1 Mailbox 10 Data 1 Register */
-#define                  CAN1_MB10_DATA2  0xffc03548   /* CAN Controller 1 Mailbox 10 Data 2 Register */
-#define                  CAN1_MB10_DATA3  0xffc0354c   /* CAN Controller 1 Mailbox 10 Data 3 Register */
-#define                 CAN1_MB10_LENGTH  0xffc03550   /* CAN Controller 1 Mailbox 10 Length Register */
-#define              CAN1_MB10_TIMESTAMP  0xffc03554   /* CAN Controller 1 Mailbox 10 Timestamp Register */
-#define                    CAN1_MB10_ID0  0xffc03558   /* CAN Controller 1 Mailbox 10 ID0 Register */
-#define                    CAN1_MB10_ID1  0xffc0355c   /* CAN Controller 1 Mailbox 10 ID1 Register */
-#define                  CAN1_MB11_DATA0  0xffc03560   /* CAN Controller 1 Mailbox 11 Data 0 Register */
-#define                  CAN1_MB11_DATA1  0xffc03564   /* CAN Controller 1 Mailbox 11 Data 1 Register */
-#define                  CAN1_MB11_DATA2  0xffc03568   /* CAN Controller 1 Mailbox 11 Data 2 Register */
-#define                  CAN1_MB11_DATA3  0xffc0356c   /* CAN Controller 1 Mailbox 11 Data 3 Register */
-#define                 CAN1_MB11_LENGTH  0xffc03570   /* CAN Controller 1 Mailbox 11 Length Register */
-#define              CAN1_MB11_TIMESTAMP  0xffc03574   /* CAN Controller 1 Mailbox 11 Timestamp Register */
-#define                    CAN1_MB11_ID0  0xffc03578   /* CAN Controller 1 Mailbox 11 ID0 Register */
-#define                    CAN1_MB11_ID1  0xffc0357c   /* CAN Controller 1 Mailbox 11 ID1 Register */
-#define                  CAN1_MB12_DATA0  0xffc03580   /* CAN Controller 1 Mailbox 12 Data 0 Register */
-#define                  CAN1_MB12_DATA1  0xffc03584   /* CAN Controller 1 Mailbox 12 Data 1 Register */
-#define                  CAN1_MB12_DATA2  0xffc03588   /* CAN Controller 1 Mailbox 12 Data 2 Register */
-#define                  CAN1_MB12_DATA3  0xffc0358c   /* CAN Controller 1 Mailbox 12 Data 3 Register */
-#define                 CAN1_MB12_LENGTH  0xffc03590   /* CAN Controller 1 Mailbox 12 Length Register */
-#define              CAN1_MB12_TIMESTAMP  0xffc03594   /* CAN Controller 1 Mailbox 12 Timestamp Register */
-#define                    CAN1_MB12_ID0  0xffc03598   /* CAN Controller 1 Mailbox 12 ID0 Register */
-#define                    CAN1_MB12_ID1  0xffc0359c   /* CAN Controller 1 Mailbox 12 ID1 Register */
-#define                  CAN1_MB13_DATA0  0xffc035a0   /* CAN Controller 1 Mailbox 13 Data 0 Register */
-#define                  CAN1_MB13_DATA1  0xffc035a4   /* CAN Controller 1 Mailbox 13 Data 1 Register */
-#define                  CAN1_MB13_DATA2  0xffc035a8   /* CAN Controller 1 Mailbox 13 Data 2 Register */
-#define                  CAN1_MB13_DATA3  0xffc035ac   /* CAN Controller 1 Mailbox 13 Data 3 Register */
-#define                 CAN1_MB13_LENGTH  0xffc035b0   /* CAN Controller 1 Mailbox 13 Length Register */
-#define              CAN1_MB13_TIMESTAMP  0xffc035b4   /* CAN Controller 1 Mailbox 13 Timestamp Register */
-#define                    CAN1_MB13_ID0  0xffc035b8   /* CAN Controller 1 Mailbox 13 ID0 Register */
-#define                    CAN1_MB13_ID1  0xffc035bc   /* CAN Controller 1 Mailbox 13 ID1 Register */
-#define                  CAN1_MB14_DATA0  0xffc035c0   /* CAN Controller 1 Mailbox 14 Data 0 Register */
-#define                  CAN1_MB14_DATA1  0xffc035c4   /* CAN Controller 1 Mailbox 14 Data 1 Register */
-#define                  CAN1_MB14_DATA2  0xffc035c8   /* CAN Controller 1 Mailbox 14 Data 2 Register */
-#define                  CAN1_MB14_DATA3  0xffc035cc   /* CAN Controller 1 Mailbox 14 Data 3 Register */
-#define                 CAN1_MB14_LENGTH  0xffc035d0   /* CAN Controller 1 Mailbox 14 Length Register */
-#define              CAN1_MB14_TIMESTAMP  0xffc035d4   /* CAN Controller 1 Mailbox 14 Timestamp Register */
-#define                    CAN1_MB14_ID0  0xffc035d8   /* CAN Controller 1 Mailbox 14 ID0 Register */
-#define                    CAN1_MB14_ID1  0xffc035dc   /* CAN Controller 1 Mailbox 14 ID1 Register */
-#define                  CAN1_MB15_DATA0  0xffc035e0   /* CAN Controller 1 Mailbox 15 Data 0 Register */
-#define                  CAN1_MB15_DATA1  0xffc035e4   /* CAN Controller 1 Mailbox 15 Data 1 Register */
-#define                  CAN1_MB15_DATA2  0xffc035e8   /* CAN Controller 1 Mailbox 15 Data 2 Register */
-#define                  CAN1_MB15_DATA3  0xffc035ec   /* CAN Controller 1 Mailbox 15 Data 3 Register */
-#define                 CAN1_MB15_LENGTH  0xffc035f0   /* CAN Controller 1 Mailbox 15 Length Register */
-#define              CAN1_MB15_TIMESTAMP  0xffc035f4   /* CAN Controller 1 Mailbox 15 Timestamp Register */
-#define                    CAN1_MB15_ID0  0xffc035f8   /* CAN Controller 1 Mailbox 15 ID0 Register */
-#define                    CAN1_MB15_ID1  0xffc035fc   /* CAN Controller 1 Mailbox 15 ID1 Register */
-
-/* CAN Controller 1 Mailbox Data Registers */
-
-#define                  CAN1_MB16_DATA0  0xffc03600   /* CAN Controller 1 Mailbox 16 Data 0 Register */
-#define                  CAN1_MB16_DATA1  0xffc03604   /* CAN Controller 1 Mailbox 16 Data 1 Register */
-#define                  CAN1_MB16_DATA2  0xffc03608   /* CAN Controller 1 Mailbox 16 Data 2 Register */
-#define                  CAN1_MB16_DATA3  0xffc0360c   /* CAN Controller 1 Mailbox 16 Data 3 Register */
-#define                 CAN1_MB16_LENGTH  0xffc03610   /* CAN Controller 1 Mailbox 16 Length Register */
-#define              CAN1_MB16_TIMESTAMP  0xffc03614   /* CAN Controller 1 Mailbox 16 Timestamp Register */
-#define                    CAN1_MB16_ID0  0xffc03618   /* CAN Controller 1 Mailbox 16 ID0 Register */
-#define                    CAN1_MB16_ID1  0xffc0361c   /* CAN Controller 1 Mailbox 16 ID1 Register */
-#define                  CAN1_MB17_DATA0  0xffc03620   /* CAN Controller 1 Mailbox 17 Data 0 Register */
-#define                  CAN1_MB17_DATA1  0xffc03624   /* CAN Controller 1 Mailbox 17 Data 1 Register */
-#define                  CAN1_MB17_DATA2  0xffc03628   /* CAN Controller 1 Mailbox 17 Data 2 Register */
-#define                  CAN1_MB17_DATA3  0xffc0362c   /* CAN Controller 1 Mailbox 17 Data 3 Register */
-#define                 CAN1_MB17_LENGTH  0xffc03630   /* CAN Controller 1 Mailbox 17 Length Register */
-#define              CAN1_MB17_TIMESTAMP  0xffc03634   /* CAN Controller 1 Mailbox 17 Timestamp Register */
-#define                    CAN1_MB17_ID0  0xffc03638   /* CAN Controller 1 Mailbox 17 ID0 Register */
-#define                    CAN1_MB17_ID1  0xffc0363c   /* CAN Controller 1 Mailbox 17 ID1 Register */
-#define                  CAN1_MB18_DATA0  0xffc03640   /* CAN Controller 1 Mailbox 18 Data 0 Register */
-#define                  CAN1_MB18_DATA1  0xffc03644   /* CAN Controller 1 Mailbox 18 Data 1 Register */
-#define                  CAN1_MB18_DATA2  0xffc03648   /* CAN Controller 1 Mailbox 18 Data 2 Register */
-#define                  CAN1_MB18_DATA3  0xffc0364c   /* CAN Controller 1 Mailbox 18 Data 3 Register */
-#define                 CAN1_MB18_LENGTH  0xffc03650   /* CAN Controller 1 Mailbox 18 Length Register */
-#define              CAN1_MB18_TIMESTAMP  0xffc03654   /* CAN Controller 1 Mailbox 18 Timestamp Register */
-#define                    CAN1_MB18_ID0  0xffc03658   /* CAN Controller 1 Mailbox 18 ID0 Register */
-#define                    CAN1_MB18_ID1  0xffc0365c   /* CAN Controller 1 Mailbox 18 ID1 Register */
-#define                  CAN1_MB19_DATA0  0xffc03660   /* CAN Controller 1 Mailbox 19 Data 0 Register */
-#define                  CAN1_MB19_DATA1  0xffc03664   /* CAN Controller 1 Mailbox 19 Data 1 Register */
-#define                  CAN1_MB19_DATA2  0xffc03668   /* CAN Controller 1 Mailbox 19 Data 2 Register */
-#define                  CAN1_MB19_DATA3  0xffc0366c   /* CAN Controller 1 Mailbox 19 Data 3 Register */
-#define                 CAN1_MB19_LENGTH  0xffc03670   /* CAN Controller 1 Mailbox 19 Length Register */
-#define              CAN1_MB19_TIMESTAMP  0xffc03674   /* CAN Controller 1 Mailbox 19 Timestamp Register */
-#define                    CAN1_MB19_ID0  0xffc03678   /* CAN Controller 1 Mailbox 19 ID0 Register */
-#define                    CAN1_MB19_ID1  0xffc0367c   /* CAN Controller 1 Mailbox 19 ID1 Register */
-#define                  CAN1_MB20_DATA0  0xffc03680   /* CAN Controller 1 Mailbox 20 Data 0 Register */
-#define                  CAN1_MB20_DATA1  0xffc03684   /* CAN Controller 1 Mailbox 20 Data 1 Register */
-#define                  CAN1_MB20_DATA2  0xffc03688   /* CAN Controller 1 Mailbox 20 Data 2 Register */
-#define                  CAN1_MB20_DATA3  0xffc0368c   /* CAN Controller 1 Mailbox 20 Data 3 Register */
-#define                 CAN1_MB20_LENGTH  0xffc03690   /* CAN Controller 1 Mailbox 20 Length Register */
-#define              CAN1_MB20_TIMESTAMP  0xffc03694   /* CAN Controller 1 Mailbox 20 Timestamp Register */
-#define                    CAN1_MB20_ID0  0xffc03698   /* CAN Controller 1 Mailbox 20 ID0 Register */
-#define                    CAN1_MB20_ID1  0xffc0369c   /* CAN Controller 1 Mailbox 20 ID1 Register */
-#define                  CAN1_MB21_DATA0  0xffc036a0   /* CAN Controller 1 Mailbox 21 Data 0 Register */
-#define                  CAN1_MB21_DATA1  0xffc036a4   /* CAN Controller 1 Mailbox 21 Data 1 Register */
-#define                  CAN1_MB21_DATA2  0xffc036a8   /* CAN Controller 1 Mailbox 21 Data 2 Register */
-#define                  CAN1_MB21_DATA3  0xffc036ac   /* CAN Controller 1 Mailbox 21 Data 3 Register */
-#define                 CAN1_MB21_LENGTH  0xffc036b0   /* CAN Controller 1 Mailbox 21 Length Register */
-#define              CAN1_MB21_TIMESTAMP  0xffc036b4   /* CAN Controller 1 Mailbox 21 Timestamp Register */
-#define                    CAN1_MB21_ID0  0xffc036b8   /* CAN Controller 1 Mailbox 21 ID0 Register */
-#define                    CAN1_MB21_ID1  0xffc036bc   /* CAN Controller 1 Mailbox 21 ID1 Register */
-#define                  CAN1_MB22_DATA0  0xffc036c0   /* CAN Controller 1 Mailbox 22 Data 0 Register */
-#define                  CAN1_MB22_DATA1  0xffc036c4   /* CAN Controller 1 Mailbox 22 Data 1 Register */
-#define                  CAN1_MB22_DATA2  0xffc036c8   /* CAN Controller 1 Mailbox 22 Data 2 Register */
-#define                  CAN1_MB22_DATA3  0xffc036cc   /* CAN Controller 1 Mailbox 22 Data 3 Register */
-#define                 CAN1_MB22_LENGTH  0xffc036d0   /* CAN Controller 1 Mailbox 22 Length Register */
-#define              CAN1_MB22_TIMESTAMP  0xffc036d4   /* CAN Controller 1 Mailbox 22 Timestamp Register */
-#define                    CAN1_MB22_ID0  0xffc036d8   /* CAN Controller 1 Mailbox 22 ID0 Register */
-#define                    CAN1_MB22_ID1  0xffc036dc   /* CAN Controller 1 Mailbox 22 ID1 Register */
-#define                  CAN1_MB23_DATA0  0xffc036e0   /* CAN Controller 1 Mailbox 23 Data 0 Register */
-#define                  CAN1_MB23_DATA1  0xffc036e4   /* CAN Controller 1 Mailbox 23 Data 1 Register */
-#define                  CAN1_MB23_DATA2  0xffc036e8   /* CAN Controller 1 Mailbox 23 Data 2 Register */
-#define                  CAN1_MB23_DATA3  0xffc036ec   /* CAN Controller 1 Mailbox 23 Data 3 Register */
-#define                 CAN1_MB23_LENGTH  0xffc036f0   /* CAN Controller 1 Mailbox 23 Length Register */
-#define              CAN1_MB23_TIMESTAMP  0xffc036f4   /* CAN Controller 1 Mailbox 23 Timestamp Register */
-#define                    CAN1_MB23_ID0  0xffc036f8   /* CAN Controller 1 Mailbox 23 ID0 Register */
-#define                    CAN1_MB23_ID1  0xffc036fc   /* CAN Controller 1 Mailbox 23 ID1 Register */
-#define                  CAN1_MB24_DATA0  0xffc03700   /* CAN Controller 1 Mailbox 24 Data 0 Register */
-#define                  CAN1_MB24_DATA1  0xffc03704   /* CAN Controller 1 Mailbox 24 Data 1 Register */
-#define                  CAN1_MB24_DATA2  0xffc03708   /* CAN Controller 1 Mailbox 24 Data 2 Register */
-#define                  CAN1_MB24_DATA3  0xffc0370c   /* CAN Controller 1 Mailbox 24 Data 3 Register */
-#define                 CAN1_MB24_LENGTH  0xffc03710   /* CAN Controller 1 Mailbox 24 Length Register */
-#define              CAN1_MB24_TIMESTAMP  0xffc03714   /* CAN Controller 1 Mailbox 24 Timestamp Register */
-#define                    CAN1_MB24_ID0  0xffc03718   /* CAN Controller 1 Mailbox 24 ID0 Register */
-#define                    CAN1_MB24_ID1  0xffc0371c   /* CAN Controller 1 Mailbox 24 ID1 Register */
-#define                  CAN1_MB25_DATA0  0xffc03720   /* CAN Controller 1 Mailbox 25 Data 0 Register */
-#define                  CAN1_MB25_DATA1  0xffc03724   /* CAN Controller 1 Mailbox 25 Data 1 Register */
-#define                  CAN1_MB25_DATA2  0xffc03728   /* CAN Controller 1 Mailbox 25 Data 2 Register */
-#define                  CAN1_MB25_DATA3  0xffc0372c   /* CAN Controller 1 Mailbox 25 Data 3 Register */
-#define                 CAN1_MB25_LENGTH  0xffc03730   /* CAN Controller 1 Mailbox 25 Length Register */
-#define              CAN1_MB25_TIMESTAMP  0xffc03734   /* CAN Controller 1 Mailbox 25 Timestamp Register */
-#define                    CAN1_MB25_ID0  0xffc03738   /* CAN Controller 1 Mailbox 25 ID0 Register */
-#define                    CAN1_MB25_ID1  0xffc0373c   /* CAN Controller 1 Mailbox 25 ID1 Register */
-#define                  CAN1_MB26_DATA0  0xffc03740   /* CAN Controller 1 Mailbox 26 Data 0 Register */
-#define                  CAN1_MB26_DATA1  0xffc03744   /* CAN Controller 1 Mailbox 26 Data 1 Register */
-#define                  CAN1_MB26_DATA2  0xffc03748   /* CAN Controller 1 Mailbox 26 Data 2 Register */
-#define                  CAN1_MB26_DATA3  0xffc0374c   /* CAN Controller 1 Mailbox 26 Data 3 Register */
-#define                 CAN1_MB26_LENGTH  0xffc03750   /* CAN Controller 1 Mailbox 26 Length Register */
-#define              CAN1_MB26_TIMESTAMP  0xffc03754   /* CAN Controller 1 Mailbox 26 Timestamp Register */
-#define                    CAN1_MB26_ID0  0xffc03758   /* CAN Controller 1 Mailbox 26 ID0 Register */
-#define                    CAN1_MB26_ID1  0xffc0375c   /* CAN Controller 1 Mailbox 26 ID1 Register */
-#define                  CAN1_MB27_DATA0  0xffc03760   /* CAN Controller 1 Mailbox 27 Data 0 Register */
-#define                  CAN1_MB27_DATA1  0xffc03764   /* CAN Controller 1 Mailbox 27 Data 1 Register */
-#define                  CAN1_MB27_DATA2  0xffc03768   /* CAN Controller 1 Mailbox 27 Data 2 Register */
-#define                  CAN1_MB27_DATA3  0xffc0376c   /* CAN Controller 1 Mailbox 27 Data 3 Register */
-#define                 CAN1_MB27_LENGTH  0xffc03770   /* CAN Controller 1 Mailbox 27 Length Register */
-#define              CAN1_MB27_TIMESTAMP  0xffc03774   /* CAN Controller 1 Mailbox 27 Timestamp Register */
-#define                    CAN1_MB27_ID0  0xffc03778   /* CAN Controller 1 Mailbox 27 ID0 Register */
-#define                    CAN1_MB27_ID1  0xffc0377c   /* CAN Controller 1 Mailbox 27 ID1 Register */
-#define                  CAN1_MB28_DATA0  0xffc03780   /* CAN Controller 1 Mailbox 28 Data 0 Register */
-#define                  CAN1_MB28_DATA1  0xffc03784   /* CAN Controller 1 Mailbox 28 Data 1 Register */
-#define                  CAN1_MB28_DATA2  0xffc03788   /* CAN Controller 1 Mailbox 28 Data 2 Register */
-#define                  CAN1_MB28_DATA3  0xffc0378c   /* CAN Controller 1 Mailbox 28 Data 3 Register */
-#define                 CAN1_MB28_LENGTH  0xffc03790   /* CAN Controller 1 Mailbox 28 Length Register */
-#define              CAN1_MB28_TIMESTAMP  0xffc03794   /* CAN Controller 1 Mailbox 28 Timestamp Register */
-#define                    CAN1_MB28_ID0  0xffc03798   /* CAN Controller 1 Mailbox 28 ID0 Register */
-#define                    CAN1_MB28_ID1  0xffc0379c   /* CAN Controller 1 Mailbox 28 ID1 Register */
-#define                  CAN1_MB29_DATA0  0xffc037a0   /* CAN Controller 1 Mailbox 29 Data 0 Register */
-#define                  CAN1_MB29_DATA1  0xffc037a4   /* CAN Controller 1 Mailbox 29 Data 1 Register */
-#define                  CAN1_MB29_DATA2  0xffc037a8   /* CAN Controller 1 Mailbox 29 Data 2 Register */
-#define                  CAN1_MB29_DATA3  0xffc037ac   /* CAN Controller 1 Mailbox 29 Data 3 Register */
-#define                 CAN1_MB29_LENGTH  0xffc037b0   /* CAN Controller 1 Mailbox 29 Length Register */
-#define              CAN1_MB29_TIMESTAMP  0xffc037b4   /* CAN Controller 1 Mailbox 29 Timestamp Register */
-#define                    CAN1_MB29_ID0  0xffc037b8   /* CAN Controller 1 Mailbox 29 ID0 Register */
-#define                    CAN1_MB29_ID1  0xffc037bc   /* CAN Controller 1 Mailbox 29 ID1 Register */
-#define                  CAN1_MB30_DATA0  0xffc037c0   /* CAN Controller 1 Mailbox 30 Data 0 Register */
-#define                  CAN1_MB30_DATA1  0xffc037c4   /* CAN Controller 1 Mailbox 30 Data 1 Register */
-#define                  CAN1_MB30_DATA2  0xffc037c8   /* CAN Controller 1 Mailbox 30 Data 2 Register */
-#define                  CAN1_MB30_DATA3  0xffc037cc   /* CAN Controller 1 Mailbox 30 Data 3 Register */
-#define                 CAN1_MB30_LENGTH  0xffc037d0   /* CAN Controller 1 Mailbox 30 Length Register */
-#define              CAN1_MB30_TIMESTAMP  0xffc037d4   /* CAN Controller 1 Mailbox 30 Timestamp Register */
-#define                    CAN1_MB30_ID0  0xffc037d8   /* CAN Controller 1 Mailbox 30 ID0 Register */
-#define                    CAN1_MB30_ID1  0xffc037dc   /* CAN Controller 1 Mailbox 30 ID1 Register */
-#define                  CAN1_MB31_DATA0  0xffc037e0   /* CAN Controller 1 Mailbox 31 Data 0 Register */
-#define                  CAN1_MB31_DATA1  0xffc037e4   /* CAN Controller 1 Mailbox 31 Data 1 Register */
-#define                  CAN1_MB31_DATA2  0xffc037e8   /* CAN Controller 1 Mailbox 31 Data 2 Register */
-#define                  CAN1_MB31_DATA3  0xffc037ec   /* CAN Controller 1 Mailbox 31 Data 3 Register */
-#define                 CAN1_MB31_LENGTH  0xffc037f0   /* CAN Controller 1 Mailbox 31 Length Register */
-#define              CAN1_MB31_TIMESTAMP  0xffc037f4   /* CAN Controller 1 Mailbox 31 Timestamp Register */
-#define                    CAN1_MB31_ID0  0xffc037f8   /* CAN Controller 1 Mailbox 31 ID0 Register */
-#define                    CAN1_MB31_ID1  0xffc037fc   /* CAN Controller 1 Mailbox 31 ID1 Register */
-
-/* ATAPI Registers */
-
-#define                    ATAPI_CONTROL  0xffc03800   /* ATAPI Control Register */
-#define                     ATAPI_STATUS  0xffc03804   /* ATAPI Status Register */
-#define                   ATAPI_DEV_ADDR  0xffc03808   /* ATAPI Device Register Address */
-#define                  ATAPI_DEV_TXBUF  0xffc0380c   /* ATAPI Device Register Write Data */
-#define                  ATAPI_DEV_RXBUF  0xffc03810   /* ATAPI Device Register Read Data */
-#define                   ATAPI_INT_MASK  0xffc03814   /* ATAPI Interrupt Mask Register */
-#define                 ATAPI_INT_STATUS  0xffc03818   /* ATAPI Interrupt Status Register */
-#define                   ATAPI_XFER_LEN  0xffc0381c   /* ATAPI Length of Transfer */
-#define                ATAPI_LINE_STATUS  0xffc03820   /* ATAPI Line Status */
-#define                   ATAPI_SM_STATE  0xffc03824   /* ATAPI State Machine Status */
-#define                  ATAPI_TERMINATE  0xffc03828   /* ATAPI Host Terminate */
-#define                 ATAPI_PIO_TFRCNT  0xffc0382c   /* ATAPI PIO mode transfer count */
-#define                 ATAPI_DMA_TFRCNT  0xffc03830   /* ATAPI DMA mode transfer count */
-#define               ATAPI_UMAIN_TFRCNT  0xffc03834   /* ATAPI UDMAIN transfer count */
-#define             ATAPI_UDMAOUT_TFRCNT  0xffc03838   /* ATAPI UDMAOUT transfer count */
-#define                  ATAPI_REG_TIM_0  0xffc03840   /* ATAPI Register Transfer Timing 0 */
-#define                  ATAPI_PIO_TIM_0  0xffc03844   /* ATAPI PIO Timing 0 Register */
-#define                  ATAPI_PIO_TIM_1  0xffc03848   /* ATAPI PIO Timing 1 Register */
-#define                ATAPI_MULTI_TIM_0  0xffc03850   /* ATAPI Multi-DMA Timing 0 Register */
-#define                ATAPI_MULTI_TIM_1  0xffc03854   /* ATAPI Multi-DMA Timing 1 Register */
-#define                ATAPI_MULTI_TIM_2  0xffc03858   /* ATAPI Multi-DMA Timing 2 Register */
-#define                ATAPI_ULTRA_TIM_0  0xffc03860   /* ATAPI Ultra-DMA Timing 0 Register */
-#define                ATAPI_ULTRA_TIM_1  0xffc03864   /* ATAPI Ultra-DMA Timing 1 Register */
-#define                ATAPI_ULTRA_TIM_2  0xffc03868   /* ATAPI Ultra-DMA Timing 2 Register */
-#define                ATAPI_ULTRA_TIM_3  0xffc0386c   /* ATAPI Ultra-DMA Timing 3 Register */
-
-/* SDH Registers */
-
-#define                      SDH_PWR_CTL  0xffc03900   /* SDH Power Control */
-#define                      SDH_CLK_CTL  0xffc03904   /* SDH Clock Control */
-#define                     SDH_ARGUMENT  0xffc03908   /* SDH Argument */
-#define                      SDH_COMMAND  0xffc0390c   /* SDH Command */
-#define                     SDH_RESP_CMD  0xffc03910   /* SDH Response Command */
-#define                    SDH_RESPONSE0  0xffc03914   /* SDH Response0 */
-#define                    SDH_RESPONSE1  0xffc03918   /* SDH Response1 */
-#define                    SDH_RESPONSE2  0xffc0391c   /* SDH Response2 */
-#define                    SDH_RESPONSE3  0xffc03920   /* SDH Response3 */
-#define                   SDH_DATA_TIMER  0xffc03924   /* SDH Data Timer */
-#define                    SDH_DATA_LGTH  0xffc03928   /* SDH Data Length */
-#define                     SDH_DATA_CTL  0xffc0392c   /* SDH Data Control */
-#define                     SDH_DATA_CNT  0xffc03930   /* SDH Data Counter */
-#define                       SDH_STATUS  0xffc03934   /* SDH Status */
-#define                   SDH_STATUS_CLR  0xffc03938   /* SDH Status Clear */
-#define                        SDH_MASK0  0xffc0393c   /* SDH Interrupt0 Mask */
-#define                        SDH_MASK1  0xffc03940   /* SDH Interrupt1 Mask */
-#define                     SDH_FIFO_CNT  0xffc03948   /* SDH FIFO Counter */
-#define                         SDH_FIFO  0xffc03980   /* SDH Data FIFO */
-#define                     SDH_E_STATUS  0xffc039c0   /* SDH Exception Status */
-#define                       SDH_E_MASK  0xffc039c4   /* SDH Exception Mask */
-#define                          SDH_CFG  0xffc039c8   /* SDH Configuration */
-#define                   SDH_RD_WAIT_EN  0xffc039cc   /* SDH Read Wait Enable */
-#define                         SDH_PID0  0xffc039d0   /* SDH Peripheral Identification0 */
-#define                         SDH_PID1  0xffc039d4   /* SDH Peripheral Identification1 */
-#define                         SDH_PID2  0xffc039d8   /* SDH Peripheral Identification2 */
-#define                         SDH_PID3  0xffc039dc   /* SDH Peripheral Identification3 */
-#define                         SDH_PID4  0xffc039e0   /* SDH Peripheral Identification4 */
-#define                         SDH_PID5  0xffc039e4   /* SDH Peripheral Identification5 */
-#define                         SDH_PID6  0xffc039e8   /* SDH Peripheral Identification6 */
-#define                         SDH_PID7  0xffc039ec   /* SDH Peripheral Identification7 */
-
-/* HOST Port Registers */
-
-#define                     HOST_CONTROL  0xffc03a00   /* HOST Control Register */
-#define                      HOST_STATUS  0xffc03a04   /* HOST Status Register */
-#define                     HOST_TIMEOUT  0xffc03a08   /* HOST Acknowledge Mode Timeout Register */
-
-/* USB Control Registers */
-
-#define                        USB_FADDR  0xffc03c00   /* Function address register */
-#define                        USB_POWER  0xffc03c04   /* Power management register */
-#define                       USB_INTRTX  0xffc03c08   /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
-#define                       USB_INTRRX  0xffc03c0c   /* Interrupt register for Rx endpoints 1 to 7 */
-#define                      USB_INTRTXE  0xffc03c10   /* Interrupt enable register for IntrTx */
-#define                      USB_INTRRXE  0xffc03c14   /* Interrupt enable register for IntrRx */
-#define                      USB_INTRUSB  0xffc03c18   /* Interrupt register for common USB interrupts */
-#define                     USB_INTRUSBE  0xffc03c1c   /* Interrupt enable register for IntrUSB */
-#define                        USB_FRAME  0xffc03c20   /* USB frame number */
-#define                        USB_INDEX  0xffc03c24   /* Index register for selecting the indexed endpoint registers */
-#define                     USB_TESTMODE  0xffc03c28   /* Enabled USB 20 test modes */
-#define                     USB_GLOBINTR  0xffc03c2c   /* Global Interrupt Mask register and Wakeup Exception Interrupt */
-#define                   USB_GLOBAL_CTL  0xffc03c30   /* Global Clock Control for the core */
-
-/* USB Packet Control Registers */
-
-#define                USB_TX_MAX_PACKET  0xffc03c40   /* Maximum packet size for Host Tx endpoint */
-#define                         USB_CSR0  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define                        USB_TXCSR  0xffc03c44   /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define                USB_RX_MAX_PACKET  0xffc03c48   /* Maximum packet size for Host Rx endpoint */
-#define                        USB_RXCSR  0xffc03c4c   /* Control Status register for Host Rx endpoint */
-#define                       USB_COUNT0  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define                      USB_RXCOUNT  0xffc03c50   /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define                       USB_TXTYPE  0xffc03c54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
-#define                    USB_NAKLIMIT0  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define                   USB_TXINTERVAL  0xffc03c58   /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define                       USB_RXTYPE  0xffc03c5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
-#define                   USB_RXINTERVAL  0xffc03c60   /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
-#define                      USB_TXCOUNT  0xffc03c68   /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* USB Endpoint FIFO Registers */
-
-#define                     USB_EP0_FIFO  0xffc03c80   /* Endpoint 0 FIFO */
-#define                     USB_EP1_FIFO  0xffc03c88   /* Endpoint 1 FIFO */
-#define                     USB_EP2_FIFO  0xffc03c90   /* Endpoint 2 FIFO */
-#define                     USB_EP3_FIFO  0xffc03c98   /* Endpoint 3 FIFO */
-#define                     USB_EP4_FIFO  0xffc03ca0   /* Endpoint 4 FIFO */
-#define                     USB_EP5_FIFO  0xffc03ca8   /* Endpoint 5 FIFO */
-#define                     USB_EP6_FIFO  0xffc03cb0   /* Endpoint 6 FIFO */
-#define                     USB_EP7_FIFO  0xffc03cb8   /* Endpoint 7 FIFO */
-
-/* USB OTG Control Registers */
-
-#define                  USB_OTG_DEV_CTL  0xffc03d00   /* OTG Device Control Register */
-#define                 USB_OTG_VBUS_IRQ  0xffc03d04   /* OTG VBUS Control Interrupts */
-#define                USB_OTG_VBUS_MASK  0xffc03d08   /* VBUS Control Interrupt Enable */
-
-/* USB Phy Control Registers */
-
-#define                     USB_LINKINFO  0xffc03d48   /* Enables programming of some PHY-side delays */
-#define                        USB_VPLEN  0xffc03d4c   /* Determines duration of VBUS pulse for VBUS charging */
-#define                      USB_HS_EOF1  0xffc03d50   /* Time buffer for High-Speed transactions */
-#define                      USB_FS_EOF1  0xffc03d54   /* Time buffer for Full-Speed transactions */
-#define                      USB_LS_EOF1  0xffc03d58   /* Time buffer for Low-Speed transactions */
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define                   USB_APHY_CNTRL  0xffc03de0   /* Register that increases visibility of Analog PHY */
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define                   USB_APHY_CALIB  0xffc03de4   /* Register used to set some calibration values */
-#define                  USB_APHY_CNTRL2  0xffc03de8   /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define                     USB_PHY_TEST  0xffc03dec   /* Used for reducing simulation time and simplifies FIFO testability */
-#define                  USB_PLLOSC_CTRL  0xffc03df0   /* Used to program different parameters for USB PLL and Oscillator */
-#define                   USB_SRP_CLKDIV  0xffc03df4   /* Used to program clock divide value for the clock fed to the SRP detection logic */
-
-/* USB Endpoint 0 Control Registers */
-
-#define                USB_EP_NI0_TXMAXP  0xffc03e00   /* Maximum packet size for Host Tx endpoint0 */
-#define                 USB_EP_NI0_TXCSR  0xffc03e04   /* Control Status register for endpoint 0 */
-#define                USB_EP_NI0_RXMAXP  0xffc03e08   /* Maximum packet size for Host Rx endpoint0 */
-#define                 USB_EP_NI0_RXCSR  0xffc03e0c   /* Control Status register for Host Rx endpoint0 */
-#define               USB_EP_NI0_RXCOUNT  0xffc03e10   /* Number of bytes received in endpoint 0 FIFO */
-#define                USB_EP_NI0_TXTYPE  0xffc03e14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
-#define            USB_EP_NI0_TXINTERVAL  0xffc03e18   /* Sets the NAK response timeout on Endpoint 0 */
-#define                USB_EP_NI0_RXTYPE  0xffc03e1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
-#define            USB_EP_NI0_RXINTERVAL  0xffc03e20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
-
-/* USB Endpoint 1 Control Registers */
-
-#define               USB_EP_NI0_TXCOUNT  0xffc03e28   /* Number of bytes to be written to the endpoint0 Tx FIFO */
-#define                USB_EP_NI1_TXMAXP  0xffc03e40   /* Maximum packet size for Host Tx endpoint1 */
-#define                 USB_EP_NI1_TXCSR  0xffc03e44   /* Control Status register for endpoint1 */
-#define                USB_EP_NI1_RXMAXP  0xffc03e48   /* Maximum packet size for Host Rx endpoint1 */
-#define                 USB_EP_NI1_RXCSR  0xffc03e4c   /* Control Status register for Host Rx endpoint1 */
-#define               USB_EP_NI1_RXCOUNT  0xffc03e50   /* Number of bytes received in endpoint1 FIFO */
-#define                USB_EP_NI1_TXTYPE  0xffc03e54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
-#define            USB_EP_NI1_TXINTERVAL  0xffc03e58   /* Sets the NAK response timeout on Endpoint1 */
-#define                USB_EP_NI1_RXTYPE  0xffc03e5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
-#define            USB_EP_NI1_RXINTERVAL  0xffc03e60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
-
-/* USB Endpoint 2 Control Registers */
-
-#define               USB_EP_NI1_TXCOUNT  0xffc03e68   /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
-#define                USB_EP_NI2_TXMAXP  0xffc03e80   /* Maximum packet size for Host Tx endpoint2 */
-#define                 USB_EP_NI2_TXCSR  0xffc03e84   /* Control Status register for endpoint2 */
-#define                USB_EP_NI2_RXMAXP  0xffc03e88   /* Maximum packet size for Host Rx endpoint2 */
-#define                 USB_EP_NI2_RXCSR  0xffc03e8c   /* Control Status register for Host Rx endpoint2 */
-#define               USB_EP_NI2_RXCOUNT  0xffc03e90   /* Number of bytes received in endpoint2 FIFO */
-#define                USB_EP_NI2_TXTYPE  0xffc03e94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
-#define            USB_EP_NI2_TXINTERVAL  0xffc03e98   /* Sets the NAK response timeout on Endpoint2 */
-#define                USB_EP_NI2_RXTYPE  0xffc03e9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
-#define            USB_EP_NI2_RXINTERVAL  0xffc03ea0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
-
-/* USB Endpoint 3 Control Registers */
-
-#define               USB_EP_NI2_TXCOUNT  0xffc03ea8   /* Number of bytes to be written to the endpoint2 Tx FIFO */
-#define                USB_EP_NI3_TXMAXP  0xffc03ec0   /* Maximum packet size for Host Tx endpoint3 */
-#define                 USB_EP_NI3_TXCSR  0xffc03ec4   /* Control Status register for endpoint3 */
-#define                USB_EP_NI3_RXMAXP  0xffc03ec8   /* Maximum packet size for Host Rx endpoint3 */
-#define                 USB_EP_NI3_RXCSR  0xffc03ecc   /* Control Status register for Host Rx endpoint3 */
-#define               USB_EP_NI3_RXCOUNT  0xffc03ed0   /* Number of bytes received in endpoint3 FIFO */
-#define                USB_EP_NI3_TXTYPE  0xffc03ed4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
-#define            USB_EP_NI3_TXINTERVAL  0xffc03ed8   /* Sets the NAK response timeout on Endpoint3 */
-#define                USB_EP_NI3_RXTYPE  0xffc03edc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
-#define            USB_EP_NI3_RXINTERVAL  0xffc03ee0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
-
-/* USB Endpoint 4 Control Registers */
-
-#define               USB_EP_NI3_TXCOUNT  0xffc03ee8   /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
-#define                USB_EP_NI4_TXMAXP  0xffc03f00   /* Maximum packet size for Host Tx endpoint4 */
-#define                 USB_EP_NI4_TXCSR  0xffc03f04   /* Control Status register for endpoint4 */
-#define                USB_EP_NI4_RXMAXP  0xffc03f08   /* Maximum packet size for Host Rx endpoint4 */
-#define                 USB_EP_NI4_RXCSR  0xffc03f0c   /* Control Status register for Host Rx endpoint4 */
-#define               USB_EP_NI4_RXCOUNT  0xffc03f10   /* Number of bytes received in endpoint4 FIFO */
-#define                USB_EP_NI4_TXTYPE  0xffc03f14   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
-#define            USB_EP_NI4_TXINTERVAL  0xffc03f18   /* Sets the NAK response timeout on Endpoint4 */
-#define                USB_EP_NI4_RXTYPE  0xffc03f1c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
-#define            USB_EP_NI4_RXINTERVAL  0xffc03f20   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
-
-/* USB Endpoint 5 Control Registers */
-
-#define               USB_EP_NI4_TXCOUNT  0xffc03f28   /* Number of bytes to be written to the endpoint4 Tx FIFO */
-#define                USB_EP_NI5_TXMAXP  0xffc03f40   /* Maximum packet size for Host Tx endpoint5 */
-#define                 USB_EP_NI5_TXCSR  0xffc03f44   /* Control Status register for endpoint5 */
-#define                USB_EP_NI5_RXMAXP  0xffc03f48   /* Maximum packet size for Host Rx endpoint5 */
-#define                 USB_EP_NI5_RXCSR  0xffc03f4c   /* Control Status register for Host Rx endpoint5 */
-#define               USB_EP_NI5_RXCOUNT  0xffc03f50   /* Number of bytes received in endpoint5 FIFO */
-#define                USB_EP_NI5_TXTYPE  0xffc03f54   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
-#define            USB_EP_NI5_TXINTERVAL  0xffc03f58   /* Sets the NAK response timeout on Endpoint5 */
-#define                USB_EP_NI5_RXTYPE  0xffc03f5c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
-#define            USB_EP_NI5_RXINTERVAL  0xffc03f60   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
-
-/* USB Endpoint 6 Control Registers */
-
-#define               USB_EP_NI5_TXCOUNT  0xffc03f68   /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
-#define                USB_EP_NI6_TXMAXP  0xffc03f80   /* Maximum packet size for Host Tx endpoint6 */
-#define                 USB_EP_NI6_TXCSR  0xffc03f84   /* Control Status register for endpoint6 */
-#define                USB_EP_NI6_RXMAXP  0xffc03f88   /* Maximum packet size for Host Rx endpoint6 */
-#define                 USB_EP_NI6_RXCSR  0xffc03f8c   /* Control Status register for Host Rx endpoint6 */
-#define               USB_EP_NI6_RXCOUNT  0xffc03f90   /* Number of bytes received in endpoint6 FIFO */
-#define                USB_EP_NI6_TXTYPE  0xffc03f94   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
-#define            USB_EP_NI6_TXINTERVAL  0xffc03f98   /* Sets the NAK response timeout on Endpoint6 */
-#define                USB_EP_NI6_RXTYPE  0xffc03f9c   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
-#define            USB_EP_NI6_RXINTERVAL  0xffc03fa0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
-
-/* USB Endpoint 7 Control Registers */
-
-#define               USB_EP_NI6_TXCOUNT  0xffc03fa8   /* Number of bytes to be written to the endpoint6 Tx FIFO */
-#define                USB_EP_NI7_TXMAXP  0xffc03fc0   /* Maximum packet size for Host Tx endpoint7 */
-#define                 USB_EP_NI7_TXCSR  0xffc03fc4   /* Control Status register for endpoint7 */
-#define                USB_EP_NI7_RXMAXP  0xffc03fc8   /* Maximum packet size for Host Rx endpoint7 */
-#define                 USB_EP_NI7_RXCSR  0xffc03fcc   /* Control Status register for Host Rx endpoint7 */
-#define               USB_EP_NI7_RXCOUNT  0xffc03fd0   /* Number of bytes received in endpoint7 FIFO */
-#define                USB_EP_NI7_TXTYPE  0xffc03fd4   /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
-#define            USB_EP_NI7_TXINTERVAL  0xffc03fd8   /* Sets the NAK response timeout on Endpoint7 */
-#define                USB_EP_NI7_RXTYPE  0xffc03fdc   /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define            USB_EP_NI7_RXINTERVAL  0xffc03ff0   /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define               USB_EP_NI7_TXCOUNT  0xffc03ff8   /* Number of bytes to be written to the endpoint7 Tx FIFO */
-#define                USB_DMA_INTERRUPT  0xffc04000   /* Indicates pending interrupts for the DMA channels */
-
-/* USB Channel 0 Config Registers */
-
-#define                  USB_DMA0CONTROL  0xffc04004   /* DMA master channel 0 configuration */
-#define                  USB_DMA0ADDRLOW  0xffc04008   /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
-#define                 USB_DMA0ADDRHIGH  0xffc0400c   /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
-#define                 USB_DMA0COUNTLOW  0xffc04010   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define                USB_DMA0COUNTHIGH  0xffc04014   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
-
-/* USB Channel 1 Config Registers */
-
-#define                  USB_DMA1CONTROL  0xffc04024   /* DMA master channel 1 configuration */
-#define                  USB_DMA1ADDRLOW  0xffc04028   /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
-#define                 USB_DMA1ADDRHIGH  0xffc0402c   /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
-#define                 USB_DMA1COUNTLOW  0xffc04030   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define                USB_DMA1COUNTHIGH  0xffc04034   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
-
-/* USB Channel 2 Config Registers */
-
-#define                  USB_DMA2CONTROL  0xffc04044   /* DMA master channel 2 configuration */
-#define                  USB_DMA2ADDRLOW  0xffc04048   /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
-#define                 USB_DMA2ADDRHIGH  0xffc0404c   /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
-#define                 USB_DMA2COUNTLOW  0xffc04050   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define                USB_DMA2COUNTHIGH  0xffc04054   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
-
-/* USB Channel 3 Config Registers */
-
-#define                  USB_DMA3CONTROL  0xffc04064   /* DMA master channel 3 configuration */
-#define                  USB_DMA3ADDRLOW  0xffc04068   /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
-#define                 USB_DMA3ADDRHIGH  0xffc0406c   /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
-#define                 USB_DMA3COUNTLOW  0xffc04070   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define                USB_DMA3COUNTHIGH  0xffc04074   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
-
-/* USB Channel 4 Config Registers */
-
-#define                  USB_DMA4CONTROL  0xffc04084   /* DMA master channel 4 configuration */
-#define                  USB_DMA4ADDRLOW  0xffc04088   /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
-#define                 USB_DMA4ADDRHIGH  0xffc0408c   /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
-#define                 USB_DMA4COUNTLOW  0xffc04090   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define                USB_DMA4COUNTHIGH  0xffc04094   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
-
-/* USB Channel 5 Config Registers */
-
-#define                  USB_DMA5CONTROL  0xffc040a4   /* DMA master channel 5 configuration */
-#define                  USB_DMA5ADDRLOW  0xffc040a8   /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
-#define                 USB_DMA5ADDRHIGH  0xffc040ac   /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
-#define                 USB_DMA5COUNTLOW  0xffc040b0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define                USB_DMA5COUNTHIGH  0xffc040b4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
-
-/* USB Channel 6 Config Registers */
-
-#define                  USB_DMA6CONTROL  0xffc040c4   /* DMA master channel 6 configuration */
-#define                  USB_DMA6ADDRLOW  0xffc040c8   /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
-#define                 USB_DMA6ADDRHIGH  0xffc040cc   /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
-#define                 USB_DMA6COUNTLOW  0xffc040d0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define                USB_DMA6COUNTHIGH  0xffc040d4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
-
-/* USB Channel 7 Config Registers */
-
-#define                  USB_DMA7CONTROL  0xffc040e4   /* DMA master channel 7 configuration */
-#define                  USB_DMA7ADDRLOW  0xffc040e8   /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
-#define                 USB_DMA7ADDRHIGH  0xffc040ec   /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
-#define                 USB_DMA7COUNTLOW  0xffc040f0   /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
-#define                USB_DMA7COUNTHIGH  0xffc040f4   /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
-
-/* Keypad Registers */
-
-#define                         KPAD_CTL  0xffc04100   /* Controls keypad module enable and disable */
-#define                    KPAD_PRESCALE  0xffc04104   /* Establish a time base for programing the KPAD_MSEL register */
-#define                        KPAD_MSEL  0xffc04108   /* Selects delay parameters for keypad interface sensitivity */
-#define                      KPAD_ROWCOL  0xffc0410c   /* Captures the row and column output values of the keys pressed */
-#define                        KPAD_STAT  0xffc04110   /* Holds and clears the status of the keypad interface interrupt */
-#define                    KPAD_SOFTEVAL  0xffc04114   /* Lets software force keypad interface to check for keys being pressed */
-
-/* Pixel Compositor (PIXC) Registers */
-
-#define                         PIXC_CTL  0xffc04400   /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
-#define                         PIXC_PPL  0xffc04404   /* Holds the number of pixels per line of the display */
-#define                         PIXC_LPF  0xffc04408   /* Holds the number of lines per frame of the display */
-#define                     PIXC_AHSTART  0xffc0440c   /* Contains horizontal start pixel information of the overlay data (set A) */
-#define                       PIXC_AHEND  0xffc04410   /* Contains horizontal end pixel information of the overlay data (set A) */
-#define                     PIXC_AVSTART  0xffc04414   /* Contains vertical start pixel information of the overlay data (set A) */
-#define                       PIXC_AVEND  0xffc04418   /* Contains vertical end pixel information of the overlay data (set A) */
-#define                     PIXC_ATRANSP  0xffc0441c   /* Contains the transparency ratio (set A) */
-#define                     PIXC_BHSTART  0xffc04420   /* Contains horizontal start pixel information of the overlay data (set B) */
-#define                       PIXC_BHEND  0xffc04424   /* Contains horizontal end pixel information of the overlay data (set B) */
-#define                     PIXC_BVSTART  0xffc04428   /* Contains vertical start pixel information of the overlay data (set B) */
-#define                       PIXC_BVEND  0xffc0442c   /* Contains vertical end pixel information of the overlay data (set B) */
-#define                     PIXC_BTRANSP  0xffc04430   /* Contains the transparency ratio (set B) */
-#define                    PIXC_INTRSTAT  0xffc0443c   /* Overlay interrupt configuration/status */
-#define                       PIXC_RYCON  0xffc04440   /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
-#define                       PIXC_GUCON  0xffc04444   /* Color space conversion matrix register. Contains the G/U conversion coefficients */
-#define                       PIXC_BVCON  0xffc04448   /* Color space conversion matrix register. Contains the B/V conversion coefficients */
-#define                      PIXC_CCBIAS  0xffc0444c   /* Bias values for the color space conversion matrix */
-#define                          PIXC_TC  0xffc04450   /* Holds the transparent color value */
-
-/* Handshake MDMA 0 Registers */
-
-#define                   HMDMA0_CONTROL  0xffc04500   /* Handshake MDMA0 Control Register */
-#define                    HMDMA0_ECINIT  0xffc04504   /* Handshake MDMA0 Initial Edge Count Register */
-#define                    HMDMA0_BCINIT  0xffc04508   /* Handshake MDMA0 Initial Block Count Register */
-#define                  HMDMA0_ECURGENT  0xffc0450c   /* Handshake MDMA0 Urgent Edge Count Threshold Register */
-#define                HMDMA0_ECOVERFLOW  0xffc04510   /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
-#define                    HMDMA0_ECOUNT  0xffc04514   /* Handshake MDMA0 Current Edge Count Register */
-#define                    HMDMA0_BCOUNT  0xffc04518   /* Handshake MDMA0 Current Block Count Register */
-
-/* Handshake MDMA 1 Registers */
-
-#define                   HMDMA1_CONTROL  0xffc04540   /* Handshake MDMA1 Control Register */
-#define                    HMDMA1_ECINIT  0xffc04544   /* Handshake MDMA1 Initial Edge Count Register */
-#define                    HMDMA1_BCINIT  0xffc04548   /* Handshake MDMA1 Initial Block Count Register */
-#define                  HMDMA1_ECURGENT  0xffc0454c   /* Handshake MDMA1 Urgent Edge Count Threshold Register */
-#define                HMDMA1_ECOVERFLOW  0xffc04550   /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
-#define                    HMDMA1_ECOUNT  0xffc04554   /* Handshake MDMA1 Current Edge Count Register */
-#define                    HMDMA1_BCOUNT  0xffc04558   /* Handshake MDMA1 Current Block Count Register */
-
-
-/* ********************************************************** */
-/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
-/*     and MULTI BIT READ MACROS                              */
-/* ********************************************************** */
-
-/* Bit masks for PIXC_CTL */
-
-#define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
-#define                  OVR_A_EN  0x2        /* Overlay A Enable */
-#define                  OVR_B_EN  0x4        /* Overlay B Enable */
-#define                  IMG_FORM  0x8        /* Image Data Format */
-#define                  OVR_FORM  0x10       /* Overlay Data Format */
-#define                  OUT_FORM  0x20       /* Output Data Format */
-#define                   UDS_MOD  0x40       /* Resampling Mode */
-#define                     TC_EN  0x80       /* Transparent Color Enable */
-#define                  IMG_STAT  0x300      /* Image FIFO Status */
-#define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
-#define                    WM_LVL  0x3000     /* FIFO Watermark Level */
-
-/* Bit masks for PIXC_AHSTART */
-
-#define                  A_HSTART  0xfff      /* Horizontal Start Coordinates */
-
-/* Bit masks for PIXC_AHEND */
-
-#define                    A_HEND  0xfff      /* Horizontal End Coordinates */
-
-/* Bit masks for PIXC_AVSTART */
-
-#define                  A_VSTART  0x3ff      /* Vertical Start Coordinates */
-
-/* Bit masks for PIXC_AVEND */
-
-#define                    A_VEND  0x3ff      /* Vertical End Coordinates */
-
-/* Bit masks for PIXC_ATRANSP */
-
-#define                  A_TRANSP  0xf        /* Transparency Value */
-
-/* Bit masks for PIXC_BHSTART */
-
-#define                  B_HSTART  0xfff      /* Horizontal Start Coordinates */
-
-/* Bit masks for PIXC_BHEND */
-
-#define                    B_HEND  0xfff      /* Horizontal End Coordinates */
-
-/* Bit masks for PIXC_BVSTART */
-
-#define                  B_VSTART  0x3ff      /* Vertical Start Coordinates */
-
-/* Bit masks for PIXC_BVEND */
-
-#define                    B_VEND  0x3ff      /* Vertical End Coordinates */
-
-/* Bit masks for PIXC_BTRANSP */
-
-#define                  B_TRANSP  0xf        /* Transparency Value */
-
-/* Bit masks for PIXC_INTRSTAT */
-
-#define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
-#define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
-#define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
-#define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
-
-/* Bit masks for PIXC_RYCON */
-
-#define                       A11  0x3ff      /* A11 in the Coefficient Matrix */
-#define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
-#define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
-#define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_GUCON */
-
-#define                       A21  0x3ff      /* A21 in the Coefficient Matrix */
-#define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
-#define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
-#define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_BVCON */
-
-#define                       A31  0x3ff      /* A31 in the Coefficient Matrix */
-#define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
-#define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
-#define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_CCBIAS */
-
-#define                       A14  0x3ff      /* A14 in the Bias Vector */
-#define                       A24  0xffc00    /* A24 in the Bias Vector */
-#define                       A34  0x3ff00000 /* A34 in the Bias Vector */
-
-/* Bit masks for PIXC_TC */
-
-#define                  RY_TRANS  0xff       /* Transparent Color - R/Y Component */
-#define                  GU_TRANS  0xff00     /* Transparent Color - G/U Component */
-#define                  BV_TRANS  0xff0000   /* Transparent Color - B/V Component */
-
-/* Bit masks for HOST_CONTROL */
-
-#define                   HOST_EN  0x1        /* Host Enable */
-#define                  HOST_END  0x2        /* Host Endianess */
-#define                 DATA_SIZE  0x4        /* Data Size */
-#define                  HOST_RST  0x8        /* Host Reset */
-#define                  HRDY_OVR  0x20       /* Host Ready Override */
-#define                  INT_MODE  0x40       /* Interrupt Mode */
-#define                     BT_EN  0x80       /* Bus Timeout Enable */
-#define                       EHW  0x100      /* Enable Host Write */
-#define                       EHR  0x200      /* Enable Host Read */
-#define                       BDR  0x400      /* Burst DMA Requests */
-
-/* Bit masks for HOST_STATUS */
-
-#define                 DMA_READY  0x1        /* DMA Ready */
-#define                  FIFOFULL  0x2        /* FIFO Full */
-#define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define              DMA_COMPLETE  0x8        /* DMA Complete */
-#define                      HSHK  0x10       /* Host Handshake */
-#define                   TIMEOUT  0x20       /* Host Timeout */
-#define                      HIRQ  0x40       /* Host Interrupt Request */
-#define                ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define                   DMA_DIR  0x100      /* DMA Direction */
-#define                       BTE  0x200      /* Bus Timeout Enabled */
-
-/* Bit masks for HOST_TIMEOUT */
-
-#define             COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
-
-/* Bit masks for MXVR_CONFIG */
-
-#define                    MXVREN  0x1        /* MXVR Enable */
-#define                      MMSM  0x2        /* MXVR Master/Slave Mode Select */
-#define                    ACTIVE  0x4        /* Active Mode */
-#define                    SDELAY  0x8        /* Synchronous Data Delay */
-#define                   NCMRXEN  0x10       /* Normal Control Message Receive Enable */
-#define                   RWRRXEN  0x20       /* Remote Write Receive Enable */
-#define                     MTXEN  0x40       /* MXVR Transmit Data Enable */
-#define                    MTXONB  0x80       /* MXVR Phy Transmitter On */
-#define                   EPARITY  0x100      /* Even Parity Select */
-#define                       MSB  0x1e00     /* Master Synchronous Boundary */
-#define                    APRXEN  0x2000     /* Asynchronous Packet Receive Enable */
-#define                    WAKEUP  0x4000     /* Wake-Up */
-#define                     LMECH  0x8000     /* Lock Mechanism Select */
-
-/* Bit masks for MXVR_STATE_0 */
-
-#define                      NACT  0x1        /* Network Activity */
-#define                    SBLOCK  0x2        /* Super Block Lock */
-#define                   FMPLLST  0xc        /* Frequency Multiply PLL SM State */
-#define                  CDRPLLST  0xe0       /* Clock/Data Recovery PLL SM State */
-#define                     APBSY  0x100      /* Asynchronous Packet Transmit Buffer Busy */
-#define                     APARB  0x200      /* Asynchronous Packet Arbitrating */
-#define                      APTX  0x400      /* Asynchronous Packet Transmitting */
-#define                      APRX  0x800      /* Receiving Asynchronous Packet */
-#define                     CMBSY  0x1000     /* Control Message Transmit Buffer Busy */
-#define                     CMARB  0x2000     /* Control Message Arbitrating */
-#define                      CMTX  0x4000     /* Control Message Transmitting */
-#define                      CMRX  0x8000     /* Receiving Control Message */
-#define                    MRXONB  0x10000    /* MRXONB Pin State */
-#define                     RGSIP  0x20000    /* Remote Get Source In Progress */
-#define                     DALIP  0x40000    /* Resource Deallocate In Progress */
-#define                      ALIP  0x80000    /* Resource Allocate In Progress */
-#define                     RRDIP  0x100000   /* Remote Read In Progress */
-#define                     RWRIP  0x200000   /* Remote Write In Progress */
-#define                     FLOCK  0x400000   /* Frame Lock */
-#define                     BLOCK  0x800000   /* Block Lock */
-#define                       RSB  0xf000000  /* Received Synchronous Boundary */
-#define                   DERRNUM  0xf0000000 /* DMA Error Channel Number */
-
-/* Bit masks for MXVR_STATE_1 */
-
-#define                   SRXNUMB  0xf        /* Synchronous Receive FIFO Number of Bytes */
-#define                   STXNUMB  0xf0       /* Synchronous Transmit FIFO Number of Bytes */
-#define                    APCONT  0x100      /* Asynchronous Packet Continuation */
-#define                  OBERRNUM  0xe00      /* DMA Out of Bounds Error Channel Number */
-#define                DMAACTIVE0  0x10000    /* DMA0 Active */
-#define                DMAACTIVE1  0x20000    /* DMA1 Active */
-#define                DMAACTIVE2  0x40000    /* DMA2 Active */
-#define                DMAACTIVE3  0x80000    /* DMA3 Active */
-#define                DMAACTIVE4  0x100000   /* DMA4 Active */
-#define                DMAACTIVE5  0x200000   /* DMA5 Active */
-#define                DMAACTIVE6  0x400000   /* DMA6 Active */
-#define                DMAACTIVE7  0x800000   /* DMA7 Active */
-#define                  DMAPMEN0  0x1000000  /* DMA0 Pattern Matching Enabled */
-#define                  DMAPMEN1  0x2000000  /* DMA1 Pattern Matching Enabled */
-#define                  DMAPMEN2  0x4000000  /* DMA2 Pattern Matching Enabled */
-#define                  DMAPMEN3  0x8000000  /* DMA3 Pattern Matching Enabled */
-#define                  DMAPMEN4  0x10000000 /* DMA4 Pattern Matching Enabled */
-#define                  DMAPMEN5  0x20000000 /* DMA5 Pattern Matching Enabled */
-#define                  DMAPMEN6  0x40000000 /* DMA6 Pattern Matching Enabled */
-#define                  DMAPMEN7  0x80000000 /* DMA7 Pattern Matching Enabled */
-
-/* Bit masks for MXVR_INT_STAT_0 */
-
-#define                      NI2A  0x1        /* Network Inactive to Active */
-#define                      NA2I  0x2        /* Network Active to Inactive */
-#define                     SBU2L  0x4        /* Super Block Unlock to Lock */
-#define                     SBL2U  0x8        /* Super Block Lock to Unlock */
-#define                       PRU  0x10       /* Position Register Updated */
-#define                      MPRU  0x20       /* Maximum Position Register Updated */
-#define                       DRU  0x40       /* Delay Register Updated */
-#define                      MDRU  0x80       /* Maximum Delay Register Updated */
-#define                       SBU  0x100      /* Synchronous Boundary Updated */
-#define                       ATU  0x200      /* Allocation Table Updated */
-#define                      FCZ0  0x400      /* Frame Counter 0 Zero */
-#define                      FCZ1  0x800      /* Frame Counter 1 Zero */
-#define                      PERR  0x1000     /* Parity Error */
-#define                      MH2L  0x2000     /* MRXONB High to Low */
-#define                      ML2H  0x4000     /* MRXONB Low to High */
-#define                       WUP  0x8000     /* Wake-Up Preamble Received */
-#define                      FU2L  0x10000    /* Frame Unlock to Lock */
-#define                      FL2U  0x20000    /* Frame Lock to Unlock */
-#define                      BU2L  0x40000    /* Block Unlock to Lock */
-#define                      BL2U  0x80000    /* Block Lock to Unlock */
-#define                     OBERR  0x100000   /* DMA Out of Bounds Error */
-#define                       PFL  0x200000   /* PLL Frequency Locked */
-#define                       SCZ  0x400000   /* System Clock Counter Zero */
-#define                      FERR  0x800000   /* FIFO Error */
-#define                       CMR  0x1000000  /* Control Message Received */
-#define                     CMROF  0x2000000  /* Control Message Receive Buffer Overflow */
-#define                      CMTS  0x4000000  /* Control Message Transmit Buffer Successfully Sent */
-#define                      CMTC  0x8000000  /* Control Message Transmit Buffer Successfully Cancelled */
-#define                      RWRC  0x10000000 /* Remote Write Control Message Completed */
-#define                       BCZ  0x20000000 /* Block Counter Zero */
-#define                     BMERR  0x40000000 /* Biphase Mark Coding Error */
-#define                      DERR  0x80000000 /* DMA Error */
-
-/* Bit masks for MXVR_INT_STAT_1 */
-
-#define                    HDONE0  0x1        /* DMA0 Half Done */
-#define                     DONE0  0x2        /* DMA0 Done */
-#define                       APR  0x4        /* Asynchronous Packet Received */
-#define                     APROF  0x8        /* Asynchronous Packet Receive Buffer Overflow */
-#define                    HDONE1  0x10       /* DMA1 Half Done */
-#define                     DONE1  0x20       /* DMA1 Done */
-#define                      APTS  0x40       /* Asynchronous Packet Transmit Buffer Successfully Sent */
-#define                      APTC  0x80       /* Asynchronous Packet Transmit Buffer Successfully Cancelled */
-#define                    HDONE2  0x100      /* DMA2 Half Done */
-#define                     DONE2  0x200      /* DMA2 Done */
-#define                     APRCE  0x400      /* Asynchronous Packet Receive CRC Error */
-#define                     APRPE  0x800      /* Asynchronous Packet Receive Packet Error */
-#define                    HDONE3  0x1000     /* DMA3 Half Done */
-#define                     DONE3  0x2000     /* DMA3 Done */
-#define                    HDONE4  0x10000    /* DMA4 Half Done */
-#define                     DONE4  0x20000    /* DMA4 Done */
-#define                    HDONE5  0x100000   /* DMA5 Half Done */
-#define                     DONE5  0x200000   /* DMA5 Done */
-#define                    HDONE6  0x1000000  /* DMA6 Half Done */
-#define                     DONE6  0x2000000  /* DMA6 Done */
-#define                    HDONE7  0x10000000 /* DMA7 Half Done */
-#define                     DONE7  0x20000000 /* DMA7 Done */
-
-/* Bit masks for MXVR_INT_EN_0 */
-
-#define                    NI2AEN  0x1        /* Network Inactive to Active Interrupt Enable */
-#define                    NA2IEN  0x2        /* Network Active to Inactive Interrupt Enable */
-#define                   SBU2LEN  0x4        /* Super Block Unlock to Lock Interrupt Enable */
-#define                   SBL2UEN  0x8        /* Super Block Lock to Unlock Interrupt Enable */
-#define                     PRUEN  0x10       /* Position Register Updated Interrupt Enable */
-#define                    MPRUEN  0x20       /* Maximum Position Register Updated Interrupt Enable */
-#define                     DRUEN  0x40       /* Delay Register Updated Interrupt Enable */
-#define                    MDRUEN  0x80       /* Maximum Delay Register Updated Interrupt Enable */
-#define                     SBUEN  0x100      /* Synchronous Boundary Updated Interrupt Enable */
-#define                     ATUEN  0x200      /* Allocation Table Updated Interrupt Enable */
-#define                    FCZ0EN  0x400      /* Frame Counter 0 Zero Interrupt Enable */
-#define                    FCZ1EN  0x800      /* Frame Counter 1 Zero Interrupt Enable */
-#define                    PERREN  0x1000     /* Parity Error Interrupt Enable */
-#define                    MH2LEN  0x2000     /* MRXONB High to Low Interrupt Enable */
-#define                    ML2HEN  0x4000     /* MRXONB Low to High Interrupt Enable */
-#define                     WUPEN  0x8000     /* Wake-Up Preamble Received Interrupt Enable */
-#define                    FU2LEN  0x10000    /* Frame Unlock to Lock Interrupt Enable */
-#define                    FL2UEN  0x20000    /* Frame Lock to Unlock Interrupt Enable */
-#define                    BU2LEN  0x40000    /* Block Unlock to Lock Interrupt Enable */
-#define                    BL2UEN  0x80000    /* Block Lock to Unlock Interrupt Enable */
-#define                   OBERREN  0x100000   /* DMA Out of Bounds Error Interrupt Enable */
-#define                     PFLEN  0x200000   /* PLL Frequency Locked Interrupt Enable */
-#define                     SCZEN  0x400000   /* System Clock Counter Zero Interrupt Enable */
-#define                    FERREN  0x800000   /* FIFO Error Interrupt Enable */
-#define                     CMREN  0x1000000  /* Control Message Received Interrupt Enable */
-#define                   CMROFEN  0x2000000  /* Control Message Receive Buffer Overflow Interrupt Enable */
-#define                    CMTSEN  0x4000000  /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */
-#define                    CMTCEN  0x8000000  /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */
-#define                    RWRCEN  0x10000000 /* Remote Write Control Message Completed Interrupt Enable */
-#define                     BCZEN  0x20000000 /* Block Counter Zero Interrupt Enable */
-#define                   BMERREN  0x40000000 /* Biphase Mark Coding Error Interrupt Enable */
-#define                    DERREN  0x80000000 /* DMA Error Interrupt Enable */
-
-/* Bit masks for MXVR_INT_EN_1 */
-
-#define                  HDONEEN0  0x1        /* DMA0 Half Done Interrupt Enable */
-#define                   DONEEN0  0x2        /* DMA0 Done Interrupt Enable */
-#define                     APREN  0x4        /* Asynchronous Packet Received Interrupt Enable */
-#define                   APROFEN  0x8        /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */
-#define                  HDONEEN1  0x10       /* DMA1 Half Done Interrupt Enable */
-#define                   DONEEN1  0x20       /* DMA1 Done Interrupt Enable */
-#define                    APTSEN  0x40       /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */
-#define                    APTCEN  0x80       /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */
-#define                  HDONEEN2  0x100      /* DMA2 Half Done Interrupt Enable */
-#define                   DONEEN2  0x200      /* DMA2 Done Interrupt Enable */
-#define                   APRCEEN  0x400      /* Asynchronous Packet Receive CRC Error Interrupt Enable */
-#define                   APRPEEN  0x800      /* Asynchronous Packet Receive Packet Error Interrupt Enable */
-#define                  HDONEEN3  0x1000     /* DMA3 Half Done Interrupt Enable */
-#define                   DONEEN3  0x2000     /* DMA3 Done Interrupt Enable */
-#define                  HDONEEN4  0x10000    /* DMA4 Half Done Interrupt Enable */
-#define                   DONEEN4  0x20000    /* DMA4 Done Interrupt Enable */
-#define                  HDONEEN5  0x100000   /* DMA5 Half Done Interrupt Enable */
-#define                   DONEEN5  0x200000   /* DMA5 Done Interrupt Enable */
-#define                  HDONEEN6  0x1000000  /* DMA6 Half Done Interrupt Enable */
-#define                   DONEEN6  0x2000000  /* DMA6 Done Interrupt Enable */
-#define                  HDONEEN7  0x10000000 /* DMA7 Half Done Interrupt Enable */
-#define                   DONEEN7  0x20000000 /* DMA7 Done Interrupt Enable */
-
-/* Bit masks for MXVR_POSITION */
-
-#define                  POSITION  0x3f       /* Node Position */
-#define                    PVALID  0x8000     /* Node Position Valid */
-
-/* Bit masks for MXVR_MAX_POSITION */
-
-#define                 MPOSITION  0x3f       /* Maximum Node Position */
-#define                   MPVALID  0x8000     /* Maximum Node Position Valid */
-
-/* Bit masks for MXVR_DELAY */
-
-#define                     DELAY  0x3f       /* Node Frame Delay */
-#define                    DVALID  0x8000     /* Node Frame Delay Valid */
-
-/* Bit masks for MXVR_MAX_DELAY */
-
-#define                    MDELAY  0x3f       /* Maximum Node Frame Delay */
-#define                   MDVALID  0x8000     /* Maximum Node Frame Delay Valid */
-
-/* Bit masks for MXVR_LADDR */
-
-#define                     LADDR  0xffff     /* Logical Address */
-#define                    LVALID  0x80000000 /* Logical Address Valid */
-
-/* Bit masks for MXVR_GADDR */
-
-#define                    GADDRL  0xff       /* Group Address Lower Byte */
-#define                    GVALID  0x8000     /* Group Address Valid */
-
-/* Bit masks for MXVR_AADDR */
-
-#define                     AADDR  0xffff     /* Alternate Address */
-#define                    AVALID  0x80000000 /* Alternate Address Valid */
-
-/* Bit masks for MXVR_ALLOC_0 */
-
-#define                       CL0  0x7f       /* Channel 0 Connection Label */
-#define                      CIU0  0x80       /* Channel 0 In Use */
-#define                       CL1  0x7f00     /* Channel 0 Connection Label */
-#define                      CIU1  0x8000     /* Channel 0 In Use */
-#define                       CL2  0x7f0000   /* Channel 0 Connection Label */
-#define                      CIU2  0x800000   /* Channel 0 In Use */
-#define                       CL3  0x7f000000 /* Channel 0 Connection Label */
-#define                      CIU3  0x80000000 /* Channel 0 In Use */
-
-/* Bit masks for MXVR_ALLOC_1 */
-
-#define                       CL4  0x7f       /* Channel 4 Connection Label */
-#define                      CIU4  0x80       /* Channel 4 In Use */
-#define                       CL5  0x7f00     /* Channel 5 Connection Label */
-#define                      CIU5  0x8000     /* Channel 5 In Use */
-#define                       CL6  0x7f0000   /* Channel 6 Connection Label */
-#define                      CIU6  0x800000   /* Channel 6 In Use */
-#define                       CL7  0x7f000000 /* Channel 7 Connection Label */
-#define                      CIU7  0x80000000 /* Channel 7 In Use */
-
-/* Bit masks for MXVR_ALLOC_2 */
-
-#define                       CL8  0x7f       /* Channel 8 Connection Label */
-#define                      CIU8  0x80       /* Channel 8 In Use */
-#define                       CL9  0x7f00     /* Channel 9 Connection Label */
-#define                      CIU9  0x8000     /* Channel 9 In Use */
-#define                      CL10  0x7f0000   /* Channel 10 Connection Label */
-#define                     CIU10  0x800000   /* Channel 10 In Use */
-#define                      CL11  0x7f000000 /* Channel 11 Connection Label */
-#define                     CIU11  0x80000000 /* Channel 11 In Use */
-
-/* Bit masks for MXVR_ALLOC_3 */
-
-#define                      CL12  0x7f       /* Channel 12 Connection Label */
-#define                     CIU12  0x80       /* Channel 12 In Use */
-#define                      CL13  0x7f00     /* Channel 13 Connection Label */
-#define                     CIU13  0x8000     /* Channel 13 In Use */
-#define                      CL14  0x7f0000   /* Channel 14 Connection Label */
-#define                     CIU14  0x800000   /* Channel 14 In Use */
-#define                      CL15  0x7f000000 /* Channel 15 Connection Label */
-#define                     CIU15  0x80000000 /* Channel 15 In Use */
-
-/* Bit masks for MXVR_ALLOC_4 */
-
-#define                      CL16  0x7f       /* Channel 16 Connection Label */
-#define                     CIU16  0x80       /* Channel 16 In Use */
-#define                      CL17  0x7f00     /* Channel 17 Connection Label */
-#define                     CIU17  0x8000     /* Channel 17 In Use */
-#define                      CL18  0x7f0000   /* Channel 18 Connection Label */
-#define                     CIU18  0x800000   /* Channel 18 In Use */
-#define                      CL19  0x7f000000 /* Channel 19 Connection Label */
-#define                     CIU19  0x80000000 /* Channel 19 In Use */
-
-/* Bit masks for MXVR_ALLOC_5 */
-
-#define                      CL20  0x7f       /* Channel 20 Connection Label */
-#define                     CIU20  0x80       /* Channel 20 In Use */
-#define                      CL21  0x7f00     /* Channel 21 Connection Label */
-#define                     CIU21  0x8000     /* Channel 21 In Use */
-#define                      CL22  0x7f0000   /* Channel 22 Connection Label */
-#define                     CIU22  0x800000   /* Channel 22 In Use */
-#define                      CL23  0x7f000000 /* Channel 23 Connection Label */
-#define                     CIU23  0x80000000 /* Channel 23 In Use */
-
-/* Bit masks for MXVR_ALLOC_6 */
-
-#define                      CL24  0x7f       /* Channel 24 Connection Label */
-#define                     CIU24  0x80       /* Channel 24 In Use */
-#define                      CL25  0x7f00     /* Channel 25 Connection Label */
-#define                     CIU25  0x8000     /* Channel 25 In Use */
-#define                      CL26  0x7f0000   /* Channel 26 Connection Label */
-#define                     CIU26  0x800000   /* Channel 26 In Use */
-#define                      CL27  0x7f000000 /* Channel 27 Connection Label */
-#define                     CIU27  0x80000000 /* Channel 27 In Use */
-
-/* Bit masks for MXVR_ALLOC_7 */
-
-#define                      CL28  0x7f       /* Channel 28 Connection Label */
-#define                     CIU28  0x80       /* Channel 28 In Use */
-#define                      CL29  0x7f00     /* Channel 29 Connection Label */
-#define                     CIU29  0x8000     /* Channel 29 In Use */
-#define                      CL30  0x7f0000   /* Channel 30 Connection Label */
-#define                     CIU30  0x800000   /* Channel 30 In Use */
-#define                      CL31  0x7f000000 /* Channel 31 Connection Label */
-#define                     CIU31  0x80000000 /* Channel 31 In Use */
-
-/* Bit masks for MXVR_ALLOC_8 */
-
-#define                      CL32  0x7f       /* Channel 32 Connection Label */
-#define                     CIU32  0x80       /* Channel 32 In Use */
-#define                      CL33  0x7f00     /* Channel 33 Connection Label */
-#define                     CIU33  0x8000     /* Channel 33 In Use */
-#define                      CL34  0x7f0000   /* Channel 34 Connection Label */
-#define                     CIU34  0x800000   /* Channel 34 In Use */
-#define                      CL35  0x7f000000 /* Channel 35 Connection Label */
-#define                     CIU35  0x80000000 /* Channel 35 In Use */
-
-/* Bit masks for MXVR_ALLOC_9 */
-
-#define                      CL36  0x7f       /* Channel 36 Connection Label */
-#define                     CIU36  0x80       /* Channel 36 In Use */
-#define                      CL37  0x7f00     /* Channel 37 Connection Label */
-#define                     CIU37  0x8000     /* Channel 37 In Use */
-#define                      CL38  0x7f0000   /* Channel 38 Connection Label */
-#define                     CIU38  0x800000   /* Channel 38 In Use */
-#define                      CL39  0x7f000000 /* Channel 39 Connection Label */
-#define                     CIU39  0x80000000 /* Channel 39 In Use */
-
-/* Bit masks for MXVR_ALLOC_10 */
-
-#define                      CL40  0x7f       /* Channel 40 Connection Label */
-#define                     CIU40  0x80       /* Channel 40 In Use */
-#define                      CL41  0x7f00     /* Channel 41 Connection Label */
-#define                     CIU41  0x8000     /* Channel 41 In Use */
-#define                      CL42  0x7f0000   /* Channel 42 Connection Label */
-#define                     CIU42  0x800000   /* Channel 42 In Use */
-#define                      CL43  0x7f000000 /* Channel 43 Connection Label */
-#define                     CIU43  0x80000000 /* Channel 43 In Use */
-
-/* Bit masks for MXVR_ALLOC_11 */
-
-#define                      CL44  0x7f       /* Channel 44 Connection Label */
-#define                     CIU44  0x80       /* Channel 44 In Use */
-#define                      CL45  0x7f00     /* Channel 45 Connection Label */
-#define                     CIU45  0x8000     /* Channel 45 In Use */
-#define                      CL46  0x7f0000   /* Channel 46 Connection Label */
-#define                     CIU46  0x800000   /* Channel 46 In Use */
-#define                      CL47  0x7f000000 /* Channel 47 Connection Label */
-#define                     CIU47  0x80000000 /* Channel 47 In Use */
-
-/* Bit masks for MXVR_ALLOC_12 */
-
-#define                      CL48  0x7f       /* Channel 48 Connection Label */
-#define                     CIU48  0x80       /* Channel 48 In Use */
-#define                      CL49  0x7f00     /* Channel 49 Connection Label */
-#define                     CIU49  0x8000     /* Channel 49 In Use */
-#define                      CL50  0x7f0000   /* Channel 50 Connection Label */
-#define                     CIU50  0x800000   /* Channel 50 In Use */
-#define                      CL51  0x7f000000 /* Channel 51 Connection Label */
-#define                     CIU51  0x80000000 /* Channel 51 In Use */
-
-/* Bit masks for MXVR_ALLOC_13 */
-
-#define                      CL52  0x7f       /* Channel 52 Connection Label */
-#define                     CIU52  0x80       /* Channel 52 In Use */
-#define                      CL53  0x7f00     /* Channel 53 Connection Label */
-#define                     CIU53  0x8000     /* Channel 53 In Use */
-#define                      CL54  0x7f0000   /* Channel 54 Connection Label */
-#define                     CIU54  0x800000   /* Channel 54 In Use */
-#define                      CL55  0x7f000000 /* Channel 55 Connection Label */
-#define                     CIU55  0x80000000 /* Channel 55 In Use */
-
-/* Bit masks for MXVR_ALLOC_14 */
-
-#define                      CL56  0x7f       /* Channel 56 Connection Label */
-#define                     CIU56  0x80       /* Channel 56 In Use */
-#define                      CL57  0x7f00     /* Channel 57 Connection Label */
-#define                     CIU57  0x8000     /* Channel 57 In Use */
-#define                      CL58  0x7f0000   /* Channel 58 Connection Label */
-#define                     CIU58  0x800000   /* Channel 58 In Use */
-#define                      CL59  0x7f000000 /* Channel 59 Connection Label */
-#define                     CIU59  0x80000000 /* Channel 59 In Use */
-
-/* MXVR_SYNC_LCHAN_0 Masks */
-
-#define LCHANPC0     0x0000000Flu
-#define LCHANPC1     0x000000F0lu
-#define LCHANPC2     0x00000F00lu
-#define LCHANPC3     0x0000F000lu
-#define LCHANPC4     0x000F0000lu
-#define LCHANPC5     0x00F00000lu
-#define LCHANPC6     0x0F000000lu
-#define LCHANPC7     0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_1 Masks */
-
-#define LCHANPC8     0x0000000Flu
-#define LCHANPC9     0x000000F0lu
-#define LCHANPC10    0x00000F00lu
-#define LCHANPC11    0x0000F000lu
-#define LCHANPC12    0x000F0000lu
-#define LCHANPC13    0x00F00000lu
-#define LCHANPC14    0x0F000000lu
-#define LCHANPC15    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_2 Masks */
-
-#define LCHANPC16    0x0000000Flu
-#define LCHANPC17    0x000000F0lu
-#define LCHANPC18    0x00000F00lu
-#define LCHANPC19    0x0000F000lu
-#define LCHANPC20    0x000F0000lu
-#define LCHANPC21    0x00F00000lu
-#define LCHANPC22    0x0F000000lu
-#define LCHANPC23    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_3 Masks */
-
-#define LCHANPC24    0x0000000Flu
-#define LCHANPC25    0x000000F0lu
-#define LCHANPC26    0x00000F00lu
-#define LCHANPC27    0x0000F000lu
-#define LCHANPC28    0x000F0000lu
-#define LCHANPC29    0x00F00000lu
-#define LCHANPC30    0x0F000000lu
-#define LCHANPC31    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_4 Masks */
-
-#define LCHANPC32    0x0000000Flu
-#define LCHANPC33    0x000000F0lu
-#define LCHANPC34    0x00000F00lu
-#define LCHANPC35    0x0000F000lu
-#define LCHANPC36    0x000F0000lu
-#define LCHANPC37    0x00F00000lu
-#define LCHANPC38    0x0F000000lu
-#define LCHANPC39    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_5 Masks */
-
-#define LCHANPC40    0x0000000Flu
-#define LCHANPC41    0x000000F0lu
-#define LCHANPC42    0x00000F00lu
-#define LCHANPC43    0x0000F000lu
-#define LCHANPC44    0x000F0000lu
-#define LCHANPC45    0x00F00000lu
-#define LCHANPC46    0x0F000000lu
-#define LCHANPC47    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_6 Masks */
-
-#define LCHANPC48    0x0000000Flu
-#define LCHANPC49    0x000000F0lu
-#define LCHANPC50    0x00000F00lu
-#define LCHANPC51    0x0000F000lu
-#define LCHANPC52    0x000F0000lu
-#define LCHANPC53    0x00F00000lu
-#define LCHANPC54    0x0F000000lu
-#define LCHANPC55    0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_7 Masks */
-
-#define LCHANPC56    0x0000000Flu
-#define LCHANPC57    0x000000F0lu
-#define LCHANPC58    0x00000F00lu
-#define LCHANPC59    0x0000F000lu
-
-/* Bit masks for MXVR_DMAx_CONFIG */
-
-#define                    MDMAEN  0x1        /* DMA Channel Enable */
-#define                     DMADD  0x2        /* DMA Channel Direction */
-#define                 BY4SWAPEN  0x20       /* DMA Channel Four Byte Swap Enable */
-#define                     LCHAN  0x3c0      /* DMA Channel Logical Channel */
-#define                 BITSWAPEN  0x400      /* DMA Channel Bit Swap Enable */
-#define                 BY2SWAPEN  0x800      /* DMA Channel Two Byte Swap Enable */
-#define                     MFLOW  0x7000     /* DMA Channel Operation Flow */
-#define                   FIXEDPM  0x80000    /* DMA Channel Fixed Pattern Matching Select */
-#define                  STARTPAT  0x300000   /* DMA Channel Start Pattern Select */
-#define                   STOPPAT  0xc00000   /* DMA Channel Stop Pattern Select */
-#define                  COUNTPOS  0x1c000000 /* DMA Channel Count Position */
-
-/* Bit masks for MXVR_AP_CTL */
-
-#define                   STARTAP  0x1        /* Start Asynchronous Packet Transmission */
-#define                  CANCELAP  0x2        /* Cancel Asynchronous Packet Transmission */
-#define                   RESETAP  0x4        /* Reset Asynchronous Packet Arbitration */
-#define                    APRBE0  0x4000     /* Asynchronous Packet Receive Buffer Entry 0 */
-#define                    APRBE1  0x8000     /* Asynchronous Packet Receive Buffer Entry 1 */
-
-/* Bit masks for MXVR_APRB_START_ADDR */
-
-#define      MXVR_APRB_START_ADDR_MASK  0x1fffffe  /* Asynchronous Packet Receive Buffer Start Address */
-
-/* Bit masks for MXVR_APRB_CURR_ADDR */
-
-#define       MXVR_APRB_CURR_ADDR_MASK  0xffffffff /* Asynchronous Packet Receive Buffer Current Address */
-
-/* Bit masks for MXVR_APTB_START_ADDR */
-
-#define       MXVR_APTB_START_ADDR_MASK  0x1fffffe  /* Asynchronous Packet Transmit Buffer Start Address */
-
-/* Bit masks for MXVR_APTB_CURR_ADDR */
-
-#define        MXVR_APTB_CURR_ADDR_MASK  0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */
-
-/* Bit masks for MXVR_CM_CTL */
-
-#define                   STARTCM  0x1        /* Start Control Message Transmission */
-#define                  CANCELCM  0x2        /* Cancel Control Message Transmission */
-#define                    CMRBE0  0x10000    /* Control Message Receive Buffer Entry 0 */
-#define                    CMRBE1  0x20000    /* Control Message Receive Buffer Entry 1 */
-#define                    CMRBE2  0x40000    /* Control Message Receive Buffer Entry 2 */
-#define                    CMRBE3  0x80000    /* Control Message Receive Buffer Entry 3 */
-#define                    CMRBE4  0x100000   /* Control Message Receive Buffer Entry 4 */
-#define                    CMRBE5  0x200000   /* Control Message Receive Buffer Entry 5 */
-#define                    CMRBE6  0x400000   /* Control Message Receive Buffer Entry 6 */
-#define                    CMRBE7  0x800000   /* Control Message Receive Buffer Entry 7 */
-#define                    CMRBE8  0x1000000  /* Control Message Receive Buffer Entry 8 */
-#define                    CMRBE9  0x2000000  /* Control Message Receive Buffer Entry 9 */
-#define                   CMRBE10  0x4000000  /* Control Message Receive Buffer Entry 10 */
-#define                   CMRBE11  0x8000000  /* Control Message Receive Buffer Entry 11 */
-#define                   CMRBE12  0x10000000 /* Control Message Receive Buffer Entry 12 */
-#define                   CMRBE13  0x20000000 /* Control Message Receive Buffer Entry 13 */
-#define                   CMRBE14  0x40000000 /* Control Message Receive Buffer Entry 14 */
-#define                   CMRBE15  0x80000000 /* Control Message Receive Buffer Entry 15 */
-
-/* Bit masks for MXVR_CMRB_START_ADDR */
-
-#define      MXVR_CMRB_START_ADDR_MASK  0x1fffffe  /* Control Message Receive Buffer Start Address */
-
-/* Bit masks for MXVR_CMRB_CURR_ADDR */
-
-#define       MXVR_CMRB_CURR_ADDR_MASK  0xffffffff /* Control Message Receive Buffer Current Address */
-
-/* Bit masks for MXVR_CMTB_START_ADDR */
-
-#define      MXVR_CMTB_START_ADDR_MASK  0x1fffffe  /* Control Message Transmit Buffer Start Address */
-
-/* Bit masks for MXVR_CMTB_CURR_ADDR */
-
-#define       MXVR_CMTB_CURR_ADDR_MASK  0xffffffff /* Control Message Transmit Buffer Current Address */
-
-/* Bit masks for MXVR_RRDB_START_ADDR */
-
-#define      MXVR_RRDB_START_ADDR_MASK  0x1fffffe  /* Remote Read Buffer Start Address */
-
-/* Bit masks for MXVR_RRDB_CURR_ADDR */
-
-#define       MXVR_RRDB_CURR_ADDR_MASK  0xffffffff /* Remote Read Buffer Current Address */
-
-/* Bit masks for MXVR_PAT_DATAx */
-
-#define              MATCH_DATA_0  0xff       /* Pattern Match Data Byte 0 */
-#define              MATCH_DATA_1  0xff00     /* Pattern Match Data Byte 1 */
-#define              MATCH_DATA_2  0xff0000   /* Pattern Match Data Byte 2 */
-#define              MATCH_DATA_3  0xff000000 /* Pattern Match Data Byte 3 */
-
-/* Bit masks for MXVR_PAT_EN_0 */
-
-#define              MATCH_EN_0_0  0x1        /* Pattern Match Enable Byte 0 Bit 0 */
-#define              MATCH_EN_0_1  0x2        /* Pattern Match Enable Byte 0 Bit 1 */
-#define              MATCH_EN_0_2  0x4        /* Pattern Match Enable Byte 0 Bit 2 */
-#define              MATCH_EN_0_3  0x8        /* Pattern Match Enable Byte 0 Bit 3 */
-#define              MATCH_EN_0_4  0x10       /* Pattern Match Enable Byte 0 Bit 4 */
-#define              MATCH_EN_0_5  0x20       /* Pattern Match Enable Byte 0 Bit 5 */
-#define              MATCH_EN_0_6  0x40       /* Pattern Match Enable Byte 0 Bit 6 */
-#define              MATCH_EN_0_7  0x80       /* Pattern Match Enable Byte 0 Bit 7 */
-#define              MATCH_EN_1_0  0x100      /* Pattern Match Enable Byte 1 Bit 0 */
-#define              MATCH_EN_1_1  0x200      /* Pattern Match Enable Byte 1 Bit 1 */
-#define              MATCH_EN_1_2  0x400      /* Pattern Match Enable Byte 1 Bit 2 */
-#define              MATCH_EN_1_3  0x800      /* Pattern Match Enable Byte 1 Bit 3 */
-#define              MATCH_EN_1_4  0x1000     /* Pattern Match Enable Byte 1 Bit 4 */
-#define              MATCH_EN_1_5  0x2000     /* Pattern Match Enable Byte 1 Bit 5 */
-#define              MATCH_EN_1_6  0x4000     /* Pattern Match Enable Byte 1 Bit 6 */
-#define              MATCH_EN_1_7  0x8000     /* Pattern Match Enable Byte 1 Bit 7 */
-#define              MATCH_EN_2_0  0x10000    /* Pattern Match Enable Byte 2 Bit 0 */
-#define              MATCH_EN_2_1  0x20000    /* Pattern Match Enable Byte 2 Bit 1 */
-#define              MATCH_EN_2_2  0x40000    /* Pattern Match Enable Byte 2 Bit 2 */
-#define              MATCH_EN_2_3  0x80000    /* Pattern Match Enable Byte 2 Bit 3 */
-#define              MATCH_EN_2_4  0x100000   /* Pattern Match Enable Byte 2 Bit 4 */
-#define              MATCH_EN_2_5  0x200000   /* Pattern Match Enable Byte 2 Bit 5 */
-#define              MATCH_EN_2_6  0x400000   /* Pattern Match Enable Byte 2 Bit 6 */
-#define              MATCH_EN_2_7  0x800000   /* Pattern Match Enable Byte 2 Bit 7 */
-#define              MATCH_EN_3_0  0x1000000  /* Pattern Match Enable Byte 3 Bit 0 */
-#define              MATCH_EN_3_1  0x2000000  /* Pattern Match Enable Byte 3 Bit 1 */
-#define              MATCH_EN_3_2  0x4000000  /* Pattern Match Enable Byte 3 Bit 2 */
-#define              MATCH_EN_3_3  0x8000000  /* Pattern Match Enable Byte 3 Bit 3 */
-#define              MATCH_EN_3_4  0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
-#define              MATCH_EN_3_5  0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
-#define              MATCH_EN_3_6  0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
-#define              MATCH_EN_3_7  0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
-
-/* Bit masks for MXVR_PAT_EN_1 */
-
-#define              MATCH_EN_0_0  0x1        /* Pattern Match Enable Byte 0 Bit 0 */
-#define              MATCH_EN_0_1  0x2        /* Pattern Match Enable Byte 0 Bit 1 */
-#define              MATCH_EN_0_2  0x4        /* Pattern Match Enable Byte 0 Bit 2 */
-#define              MATCH_EN_0_3  0x8        /* Pattern Match Enable Byte 0 Bit 3 */
-#define              MATCH_EN_0_4  0x10       /* Pattern Match Enable Byte 0 Bit 4 */
-#define              MATCH_EN_0_5  0x20       /* Pattern Match Enable Byte 0 Bit 5 */
-#define              MATCH_EN_0_6  0x40       /* Pattern Match Enable Byte 0 Bit 6 */
-#define              MATCH_EN_0_7  0x80       /* Pattern Match Enable Byte 0 Bit 7 */
-#define              MATCH_EN_1_0  0x100      /* Pattern Match Enable Byte 1 Bit 0 */
-#define              MATCH_EN_1_1  0x200      /* Pattern Match Enable Byte 1 Bit 1 */
-#define              MATCH_EN_1_2  0x400      /* Pattern Match Enable Byte 1 Bit 2 */
-#define              MATCH_EN_1_3  0x800      /* Pattern Match Enable Byte 1 Bit 3 */
-#define              MATCH_EN_1_4  0x1000     /* Pattern Match Enable Byte 1 Bit 4 */
-#define              MATCH_EN_1_5  0x2000     /* Pattern Match Enable Byte 1 Bit 5 */
-#define              MATCH_EN_1_6  0x4000     /* Pattern Match Enable Byte 1 Bit 6 */
-#define              MATCH_EN_1_7  0x8000     /* Pattern Match Enable Byte 1 Bit 7 */
-#define              MATCH_EN_2_0  0x10000    /* Pattern Match Enable Byte 2 Bit 0 */
-#define              MATCH_EN_2_1  0x20000    /* Pattern Match Enable Byte 2 Bit 1 */
-#define              MATCH_EN_2_2  0x40000    /* Pattern Match Enable Byte 2 Bit 2 */
-#define              MATCH_EN_2_3  0x80000    /* Pattern Match Enable Byte 2 Bit 3 */
-#define              MATCH_EN_2_4  0x100000   /* Pattern Match Enable Byte 2 Bit 4 */
-#define              MATCH_EN_2_5  0x200000   /* Pattern Match Enable Byte 2 Bit 5 */
-#define              MATCH_EN_2_6  0x400000   /* Pattern Match Enable Byte 2 Bit 6 */
-#define              MATCH_EN_2_7  0x800000   /* Pattern Match Enable Byte 2 Bit 7 */
-#define              MATCH_EN_3_0  0x1000000  /* Pattern Match Enable Byte 3 Bit 0 */
-#define              MATCH_EN_3_1  0x2000000  /* Pattern Match Enable Byte 3 Bit 1 */
-#define              MATCH_EN_3_2  0x4000000  /* Pattern Match Enable Byte 3 Bit 2 */
-#define              MATCH_EN_3_3  0x8000000  /* Pattern Match Enable Byte 3 Bit 3 */
-#define              MATCH_EN_3_4  0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
-#define              MATCH_EN_3_5  0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
-#define              MATCH_EN_3_6  0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
-#define              MATCH_EN_3_7  0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
-
-/* Bit masks for MXVR_FRAME_CNT_0 */
-
-#define                      FCNT  0xffff     /* Frame Count */
-
-/* Bit masks for MXVR_FRAME_CNT_1 */
-
-#define                      FCNT  0xffff     /* Frame Count */
-
-/* Bit masks for MXVR_ROUTING_0 */
-
-#define                    TX_CH0  0x3f       /* Transmit Channel 0 */
-#define                  MUTE_CH0  0x80       /* Mute Channel 0 */
-#define                    TX_CH1  0x3f00     /* Transmit Channel 0 */
-#define                  MUTE_CH1  0x8000     /* Mute Channel 0 */
-#define                    TX_CH2  0x3f0000   /* Transmit Channel 0 */
-#define                  MUTE_CH2  0x800000   /* Mute Channel 0 */
-#define                    TX_CH3  0x3f000000 /* Transmit Channel 0 */
-#define                  MUTE_CH3  0x80000000 /* Mute Channel 0 */
-
-/* Bit masks for MXVR_ROUTING_1 */
-
-#define                    TX_CH4  0x3f       /* Transmit Channel 4 */
-#define                  MUTE_CH4  0x80       /* Mute Channel 4 */
-#define                    TX_CH5  0x3f00     /* Transmit Channel 5 */
-#define                  MUTE_CH5  0x8000     /* Mute Channel 5 */
-#define                    TX_CH6  0x3f0000   /* Transmit Channel 6 */
-#define                  MUTE_CH6  0x800000   /* Mute Channel 6 */
-#define                    TX_CH7  0x3f000000 /* Transmit Channel 7 */
-#define                  MUTE_CH7  0x80000000 /* Mute Channel 7 */
-
-/* Bit masks for MXVR_ROUTING_2 */
-
-#define                    TX_CH8  0x3f       /* Transmit Channel 8 */
-#define                  MUTE_CH8  0x80       /* Mute Channel 8 */
-#define                    TX_CH9  0x3f00     /* Transmit Channel 9 */
-#define                  MUTE_CH9  0x8000     /* Mute Channel 9 */
-#define                   TX_CH10  0x3f0000   /* Transmit Channel 10 */
-#define                 MUTE_CH10  0x800000   /* Mute Channel 10 */
-#define                   TX_CH11  0x3f000000 /* Transmit Channel 11 */
-#define                 MUTE_CH11  0x80000000 /* Mute Channel 11 */
-
-/* Bit masks for MXVR_ROUTING_3 */
-
-#define                   TX_CH12  0x3f       /* Transmit Channel 12 */
-#define                 MUTE_CH12  0x80       /* Mute Channel 12 */
-#define                   TX_CH13  0x3f00     /* Transmit Channel 13 */
-#define                 MUTE_CH13  0x8000     /* Mute Channel 13 */
-#define                   TX_CH14  0x3f0000   /* Transmit Channel 14 */
-#define                 MUTE_CH14  0x800000   /* Mute Channel 14 */
-#define                   TX_CH15  0x3f000000 /* Transmit Channel 15 */
-#define                 MUTE_CH15  0x80000000 /* Mute Channel 15 */
-
-/* Bit masks for MXVR_ROUTING_4 */
-
-#define                   TX_CH16  0x3f       /* Transmit Channel 16 */
-#define                 MUTE_CH16  0x80       /* Mute Channel 16 */
-#define                   TX_CH17  0x3f00     /* Transmit Channel 17 */
-#define                 MUTE_CH17  0x8000     /* Mute Channel 17 */
-#define                   TX_CH18  0x3f0000   /* Transmit Channel 18 */
-#define                 MUTE_CH18  0x800000   /* Mute Channel 18 */
-#define                   TX_CH19  0x3f000000 /* Transmit Channel 19 */
-#define                 MUTE_CH19  0x80000000 /* Mute Channel 19 */
-
-/* Bit masks for MXVR_ROUTING_5 */
-
-#define                   TX_CH20  0x3f       /* Transmit Channel 20 */
-#define                 MUTE_CH20  0x80       /* Mute Channel 20 */
-#define                   TX_CH21  0x3f00     /* Transmit Channel 21 */
-#define                 MUTE_CH21  0x8000     /* Mute Channel 21 */
-#define                   TX_CH22  0x3f0000   /* Transmit Channel 22 */
-#define                 MUTE_CH22  0x800000   /* Mute Channel 22 */
-#define                   TX_CH23  0x3f000000 /* Transmit Channel 23 */
-#define                 MUTE_CH23  0x80000000 /* Mute Channel 23 */
-
-/* Bit masks for MXVR_ROUTING_6 */
-
-#define                   TX_CH24  0x3f       /* Transmit Channel 24 */
-#define                 MUTE_CH24  0x80       /* Mute Channel 24 */
-#define                   TX_CH25  0x3f00     /* Transmit Channel 25 */
-#define                 MUTE_CH25  0x8000     /* Mute Channel 25 */
-#define                   TX_CH26  0x3f0000   /* Transmit Channel 26 */
-#define                 MUTE_CH26  0x800000   /* Mute Channel 26 */
-#define                   TX_CH27  0x3f000000 /* Transmit Channel 27 */
-#define                 MUTE_CH27  0x80000000 /* Mute Channel 27 */
-
-/* Bit masks for MXVR_ROUTING_7 */
-
-#define                   TX_CH28  0x3f       /* Transmit Channel 28 */
-#define                 MUTE_CH28  0x80       /* Mute Channel 28 */
-#define                   TX_CH29  0x3f00     /* Transmit Channel 29 */
-#define                 MUTE_CH29  0x8000     /* Mute Channel 29 */
-#define                   TX_CH30  0x3f0000   /* Transmit Channel 30 */
-#define                 MUTE_CH30  0x800000   /* Mute Channel 30 */
-#define                   TX_CH31  0x3f000000 /* Transmit Channel 31 */
-#define                 MUTE_CH31  0x80000000 /* Mute Channel 31 */
-
-/* Bit masks for MXVR_ROUTING_8 */
-
-#define                   TX_CH32  0x3f       /* Transmit Channel 32 */
-#define                 MUTE_CH32  0x80       /* Mute Channel 32 */
-#define                   TX_CH33  0x3f00     /* Transmit Channel 33 */
-#define                 MUTE_CH33  0x8000     /* Mute Channel 33 */
-#define                   TX_CH34  0x3f0000   /* Transmit Channel 34 */
-#define                 MUTE_CH34  0x800000   /* Mute Channel 34 */
-#define                   TX_CH35  0x3f000000 /* Transmit Channel 35 */
-#define                 MUTE_CH35  0x80000000 /* Mute Channel 35 */
-
-/* Bit masks for MXVR_ROUTING_9 */
-
-#define                   TX_CH36  0x3f       /* Transmit Channel 36 */
-#define                 MUTE_CH36  0x80       /* Mute Channel 36 */
-#define                   TX_CH37  0x3f00     /* Transmit Channel 37 */
-#define                 MUTE_CH37  0x8000     /* Mute Channel 37 */
-#define                   TX_CH38  0x3f0000   /* Transmit Channel 38 */
-#define                 MUTE_CH38  0x800000   /* Mute Channel 38 */
-#define                   TX_CH39  0x3f000000 /* Transmit Channel 39 */
-#define                 MUTE_CH39  0x80000000 /* Mute Channel 39 */
-
-/* Bit masks for MXVR_ROUTING_10 */
-
-#define                   TX_CH40  0x3f       /* Transmit Channel 40 */
-#define                 MUTE_CH40  0x80       /* Mute Channel 40 */
-#define                   TX_CH41  0x3f00     /* Transmit Channel 41 */
-#define                 MUTE_CH41  0x8000     /* Mute Channel 41 */
-#define                   TX_CH42  0x3f0000   /* Transmit Channel 42 */
-#define                 MUTE_CH42  0x800000   /* Mute Channel 42 */
-#define                   TX_CH43  0x3f000000 /* Transmit Channel 43 */
-#define                 MUTE_CH43  0x80000000 /* Mute Channel 43 */
-
-/* Bit masks for MXVR_ROUTING_11 */
-
-#define                   TX_CH44  0x3f       /* Transmit Channel 44 */
-#define                 MUTE_CH44  0x80       /* Mute Channel 44 */
-#define                   TX_CH45  0x3f00     /* Transmit Channel 45 */
-#define                 MUTE_CH45  0x8000     /* Mute Channel 45 */
-#define                   TX_CH46  0x3f0000   /* Transmit Channel 46 */
-#define                 MUTE_CH46  0x800000   /* Mute Channel 46 */
-#define                   TX_CH47  0x3f000000 /* Transmit Channel 47 */
-#define                 MUTE_CH47  0x80000000 /* Mute Channel 47 */
-
-/* Bit masks for MXVR_ROUTING_12 */
-
-#define                   TX_CH48  0x3f       /* Transmit Channel 48 */
-#define                 MUTE_CH48  0x80       /* Mute Channel 48 */
-#define                   TX_CH49  0x3f00     /* Transmit Channel 49 */
-#define                 MUTE_CH49  0x8000     /* Mute Channel 49 */
-#define                   TX_CH50  0x3f0000   /* Transmit Channel 50 */
-#define                 MUTE_CH50  0x800000   /* Mute Channel 50 */
-#define                   TX_CH51  0x3f000000 /* Transmit Channel 51 */
-#define                 MUTE_CH51  0x80000000 /* Mute Channel 51 */
-
-/* Bit masks for MXVR_ROUTING_13 */
-
-#define                   TX_CH52  0x3f       /* Transmit Channel 52 */
-#define                 MUTE_CH52  0x80       /* Mute Channel 52 */
-#define                   TX_CH53  0x3f00     /* Transmit Channel 53 */
-#define                 MUTE_CH53  0x8000     /* Mute Channel 53 */
-#define                   TX_CH54  0x3f0000   /* Transmit Channel 54 */
-#define                 MUTE_CH54  0x800000   /* Mute Channel 54 */
-#define                   TX_CH55  0x3f000000 /* Transmit Channel 55 */
-#define                 MUTE_CH55  0x80000000 /* Mute Channel 55 */
-
-/* Bit masks for MXVR_ROUTING_14 */
-
-#define                   TX_CH56  0x3f       /* Transmit Channel 56 */
-#define                 MUTE_CH56  0x80       /* Mute Channel 56 */
-#define                   TX_CH57  0x3f00     /* Transmit Channel 57 */
-#define                 MUTE_CH57  0x8000     /* Mute Channel 57 */
-#define                   TX_CH58  0x3f0000   /* Transmit Channel 58 */
-#define                 MUTE_CH58  0x800000   /* Mute Channel 58 */
-#define                   TX_CH59  0x3f000000 /* Transmit Channel 59 */
-#define                 MUTE_CH59  0x80000000 /* Mute Channel 59 */
-
-/* Bit masks for MXVR_BLOCK_CNT */
-
-#define                      BCNT  0xffff     /* Block Count */
-
-/* Bit masks for MXVR_CLK_CTL */
-
-#define                  MXTALCEN  0x1        /* MXVR Crystal Oscillator Clock Enable */
-#define                  MXTALFEN  0x2        /* MXVR Crystal Oscillator Feedback Enable */
-#define                  MXTALMUL  0x30       /* MXVR Crystal Multiplier */
-#define                  CLKX3SEL  0x80       /* Clock Generation Source Select */
-#define                   MMCLKEN  0x100      /* Master Clock Enable */
-#define                  MMCLKMUL  0x1e00     /* Master Clock Multiplication Factor */
-#define                   PLLSMPS  0xe000     /* MXVR PLL State Machine Prescaler */
-#define                   MBCLKEN  0x10000    /* Bit Clock Enable */
-#define                  MBCLKDIV  0x1e0000   /* Bit Clock Divide Factor */
-#define                     INVRX  0x800000   /* Invert Receive Data */
-#define                     MFSEN  0x1000000  /* Frame Sync Enable */
-#define                    MFSDIV  0x1e000000 /* Frame Sync Divide Factor */
-#define                    MFSSEL  0x60000000 /* Frame Sync Select */
-#define                   MFSSYNC  0x80000000 /* Frame Sync Synchronization Select */
-
-/* Bit masks for MXVR_CDRPLL_CTL */
-
-#define                   CDRSMEN  0x1        /* MXVR CDRPLL State Machine Enable */
-#define                   CDRRSTB  0x2        /* MXVR CDRPLL Reset */
-#define                   CDRSVCO  0x4        /* MXVR CDRPLL Start VCO */
-#define                   CDRMODE  0x8        /* MXVR CDRPLL CDR Mode Select */
-#define                   CDRSCNT  0x3f0      /* MXVR CDRPLL Start Counter */
-#define                   CDRLCNT  0xfc00     /* MXVR CDRPLL Lock Counter */
-#define                 CDRSHPSEL  0x3f0000   /* MXVR CDRPLL Shaper Select */
-#define                  CDRSHPEN  0x800000   /* MXVR CDRPLL Shaper Enable */
-#define                  CDRCPSEL  0xff000000 /* MXVR CDRPLL Charge Pump Current Select */
-
-/* Bit masks for MXVR_FMPLL_CTL */
-
-#define                    FMSMEN  0x1        /* MXVR FMPLL State Machine Enable */
-#define                    FMRSTB  0x2        /* MXVR FMPLL Reset */
-#define                    FMSVCO  0x4        /* MXVR FMPLL Start VCO */
-#define                    FMSCNT  0x3f0      /* MXVR FMPLL Start Counter */
-#define                    FMLCNT  0xfc00     /* MXVR FMPLL Lock Counter */
-#define                   FMCPSEL  0xff000000 /* MXVR FMPLL Charge Pump Current Select */
-
-/* Bit masks for MXVR_PIN_CTL */
-
-#define                  MTXONBOD  0x1        /* MTXONB Open Drain Select */
-#define                   MTXONBG  0x2        /* MTXONB Gates MTX Select */
-#define                     MFSOE  0x10       /* MFS Output Enable */
-#define                  MFSGPSEL  0x20       /* MFS General Purpose Output Select */
-#define                  MFSGPDAT  0x40       /* MFS General Purpose Output Data */
-
-/* Bit masks for MXVR_SCLK_CNT */
-
-#define                      SCNT  0xffff     /* System Clock Count */
-
-/* Bit masks for KPAD_CTL */
-
-#define                   KPAD_EN  0x1        /* Keypad Enable */
-#define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
-#define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
-#define                KPAD_COLEN  0xe000     /* Column Enable Width */
-
-/* Bit masks for KPAD_PRESCALE */
-
-#define         KPAD_PRESCALE_VAL  0x3f       /* Key Prescale Value */
-
-/* Bit masks for KPAD_MSEL */
-
-#define                DBON_SCALE  0xff       /* Debounce Scale Value */
-#define              COLDRV_SCALE  0xff00     /* Column Driver Scale Value */
-
-/* Bit masks for KPAD_ROWCOL */
-
-#define                  KPAD_ROW  0xff       /* Rows Pressed */
-#define                  KPAD_COL  0xff00     /* Columns Pressed */
-
-/* Bit masks for KPAD_STAT */
-
-#define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
-#define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
-#define              KPAD_PRESSED  0x8        /* Key press current status */
-
-/* Bit masks for KPAD_SOFTEVAL */
-
-#define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
-
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
-/* Bit masks for ATAPI_CONTROL */
-
-#define                 PIO_START  0x1        /* Start PIO/Reg Op */
-#define               MULTI_START  0x2        /* Start Multi-DMA Op */
-#define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
-#define                  XFER_DIR  0x8        /* Transfer Direction */
-#define                  IORDY_EN  0x10       /* IORDY Enable */
-#define                FIFO_FLUSH  0x20       /* Flush FIFOs */
-#define                  SOFT_RST  0x40       /* Soft Reset */
-#define                   DEV_RST  0x80       /* Device Reset */
-#define                TFRCNT_RST  0x100      /* Trans Count Reset */
-#define               END_ON_TERM  0x200      /* End/Terminate Select */
-#define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
-#define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
-
-/* Bit masks for ATAPI_STATUS */
-
-#define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
-#define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
-#define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
-#define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
-
-/* Bit masks for ATAPI_DEV_ADDR */
-
-#define                  DEV_ADDR  0x1f       /* Device Address */
-
-/* Bit masks for ATAPI_INT_MASK */
-
-#define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
-#define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
-#define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
-#define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
-#define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
-#define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
-#define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
-#define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
-
-/* Bit masks for ATAPI_INT_STATUS */
-
-#define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
-#define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
-#define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
-#define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
-#define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
-#define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
-#define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
-#define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
-
-/* Bit masks for ATAPI_LINE_STATUS */
-
-#define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
-#define                ATAPI_DASP  0x2        /* Device dasp to host line status */
-#define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
-#define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
-#define                ATAPI_ADDR  0x70       /* ATAPI address line status */
-#define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
-#define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
-#define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
-#define               ATAPI_DIORN  0x400      /* ATAPI read line status */
-#define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_SM_STATE */
-
-#define                PIO_CSTATE  0xf        /* PIO mode state machine current state */
-#define                DMA_CSTATE  0xf0       /* DMA mode state machine current state */
-#define             UDMAIN_CSTATE  0xf00      /* Ultra DMA-In mode state machine current state */
-#define            UDMAOUT_CSTATE  0xf000     /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_TERMINATE */
-
-#define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
-
-/* Bit masks for ATAPI_REG_TIM_0 */
-
-#define                    T2_REG  0xff       /* End of cycle time for register access transfers */
-#define                  TEOC_REG  0xff00     /* Selects DIOR/DIOW pulsewidth */
-
-/* Bit masks for ATAPI_PIO_TIM_0 */
-
-#define                    T1_REG  0xf        /* Time from address valid to DIOR/DIOW */
-#define                T2_REG_PIO  0xff0      /* DIOR/DIOW pulsewidth */
-#define                    T4_REG  0xf000     /* DIOW data hold */
-
-/* Bit masks for ATAPI_PIO_TIM_1 */
-
-#define              TEOC_REG_PIO  0xff       /* End of cycle time for PIO access transfers. */
-
-/* Bit masks for ATAPI_MULTI_TIM_0 */
-
-#define                        TD  0xff       /* DIOR/DIOW asserted pulsewidth */
-#define                        TM  0xff00     /* Time from address valid to DIOR/DIOW */
-
-/* Bit masks for ATAPI_MULTI_TIM_1 */
-
-#define                       TKW  0xff       /* Selects DIOW negated pulsewidth */
-#define                       TKR  0xff00     /* Selects DIOR negated pulsewidth */
-
-/* Bit masks for ATAPI_MULTI_TIM_2 */
-
-#define                        TH  0xff       /* Selects DIOW data hold */
-#define                      TEOC  0xff00     /* Selects end of cycle for DMA */
-
-/* Bit masks for ATAPI_ULTRA_TIM_0 */
-
-#define                      TACK  0xff       /* Selects setup and hold times for TACK */
-#define                      TENV  0xff00     /* Selects envelope time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_1 */
-
-#define                      TDVS  0xff       /* Selects data valid setup time */
-#define                 TCYC_TDVS  0xff00     /* Selects cycle time - TDVS time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_2 */
-
-#define                       TSS  0xff       /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
-#define                      TMLI  0xff00     /* Selects interlock time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_3 */
-
-#define                      TZAH  0xff       /* Selects minimum delay required for output */
-#define               READY_PAUSE  0xff00     /* Selects ready to pause */
-
-/* Bit masks for TIMER_ENABLE1 */
-
-#define                    TIMEN8  0x1        /* Timer 8 Enable */
-#define                    TIMEN9  0x2        /* Timer 9 Enable */
-#define                   TIMEN10  0x4        /* Timer 10 Enable */
-
-/* Bit masks for TIMER_DISABLE1 */
-
-#define                   TIMDIS8  0x1        /* Timer 8 Disable */
-#define                   TIMDIS9  0x2        /* Timer 9 Disable */
-#define                  TIMDIS10  0x4        /* Timer 10 Disable */
-
-/* Bit masks for TIMER_STATUS1 */
-
-#define                    TIMIL8  0x1        /* Timer 8 Interrupt */
-#define                    TIMIL9  0x2        /* Timer 9 Interrupt */
-#define                   TIMIL10  0x4        /* Timer 10 Interrupt */
-#define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
-#define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
-#define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
-#define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
-#define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
-#define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
-
-/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
-
-/* Bit masks for USB_FADDR */
-
-#define          FUNCTION_ADDRESS  0x7f       /* Function address */
-
-/* Bit masks for USB_POWER */
-
-#define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
-#define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
-#define               RESUME_MODE  0x4        /* DMA Mode */
-#define                     RESET  0x8        /* Reset indicator */
-#define                   HS_MODE  0x10       /* High Speed mode indicator */
-#define                 HS_ENABLE  0x20       /* high Speed Enable */
-#define                 SOFT_CONN  0x40       /* Soft connect */
-#define                ISO_UPDATE  0x80       /* Isochronous update */
-
-/* Bit masks for USB_INTRTX */
-
-#define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
-#define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
-#define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
-#define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
-#define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
-#define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
-#define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
-#define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRRX */
-
-#define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
-#define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
-#define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
-#define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
-#define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
-#define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
-#define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRTXE */
-
-#define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
-#define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
-#define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
-#define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
-#define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
-#define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
-#define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
-#define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
-
-/* Bit masks for USB_INTRRXE */
-
-#define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
-#define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
-#define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
-#define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
-#define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
-#define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
-#define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
-
-/* Bit masks for USB_INTRUSB */
-
-#define                 SUSPEND_B  0x1        /* Suspend indicator */
-#define                  RESUME_B  0x2        /* Resume indicator */
-#define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
-#define                     SOF_B  0x8        /* Start of frame */
-#define                    CONN_B  0x10       /* Connection indicator */
-#define                  DISCON_B  0x20       /* Disconnect indicator */
-#define             SESSION_REQ_B  0x40       /* Session Request */
-#define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
-
-/* Bit masks for USB_INTRUSBE */
-
-#define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
-#define                 RESUME_BE  0x2        /* Resume indicator int enable */
-#define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
-#define                    SOF_BE  0x8        /* Start of frame int enable */
-#define                   CONN_BE  0x10       /* Connection indicator int enable */
-#define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
-#define            SESSION_REQ_BE  0x40       /* Session Request int enable */
-#define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
-
-/* Bit masks for USB_FRAME */
-
-#define              FRAME_NUMBER  0x7ff      /* Frame number */
-
-/* Bit masks for USB_INDEX */
-
-#define         SELECTED_ENDPOINT  0xf        /* selected endpoint */
-
-/* Bit masks for USB_GLOBAL_CTL */
-
-#define                GLOBAL_ENA  0x1        /* enables USB module */
-#define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
-#define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
-#define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
-#define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
-#define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
-#define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
-#define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
-#define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
-#define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
-#define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
-#define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
-#define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
-#define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
-#define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
-
-/* Bit masks for USB_OTG_DEV_CTL */
-
-#define                   SESSION  0x1        /* session indicator */
-#define                  HOST_REQ  0x2        /* Host negotiation request */
-#define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
-#define                     VBUS0  0x8        /* Vbus level indicator[0] */
-#define                     VBUS1  0x10       /* Vbus level indicator[1] */
-#define                     LSDEV  0x20       /* Low-speed indicator */
-#define                     FSDEV  0x40       /* Full or High-speed indicator */
-#define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
-
-/* Bit masks for USB_OTG_VBUS_IRQ */
-
-#define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
-#define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
-#define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
-#define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
-#define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
-#define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
-
-/* Bit masks for USB_OTG_VBUS_MASK */
-
-#define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
-#define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
-#define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
-#define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
-#define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
-#define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
-
-/* Bit masks for USB_CSR0 */
-
-#define                  RXPKTRDY  0x1        /* data packet receive indicator */
-#define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
-#define                STALL_SENT  0x4        /* STALL handshake sent */
-#define                   DATAEND  0x8        /* Data end indicator */
-#define                  SETUPEND  0x10       /* Setup end */
-#define                 SENDSTALL  0x20       /* Send STALL handshake */
-#define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
-#define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
-#define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
-#define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
-#define                SETUPPKT_H  0x8        /* send Setup token host mode */
-#define                   ERROR_H  0x10       /* timeout error indicator host mode */
-#define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
-#define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
-#define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
-
-/* Bit masks for USB_COUNT0 */
-
-#define              EP0_RX_COUNT  0x7f       /* number of received bytes in EP0 FIFO */
-
-/* Bit masks for USB_NAKLIMIT0 */
-
-#define             EP0_NAK_LIMIT  0x1f       /* number of frames/micro frames after which EP0 timeouts */
-
-/* Bit masks for USB_TX_MAX_PACKET */
-
-#define         MAX_PACKET_SIZE_T  0x7ff      /* maximum data pay load in a frame */
-
-/* Bit masks for USB_RX_MAX_PACKET */
-
-#define         MAX_PACKET_SIZE_R  0x7ff      /* maximum data pay load in a frame */
-
-/* Bit masks for USB_TXCSR */
-
-#define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
-#define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
-#define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
-#define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
-#define              STALL_SEND_T  0x10       /* issue a Stall handshake */
-#define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
-#define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
-#define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
-#define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
-#define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
-#define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
-#define                     ISO_T  0x4000     /* enable Isochronous transfers */
-#define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
-#define                  ERROR_TH  0x4        /* error condition host mode */
-#define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
-#define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
-
-/* Bit masks for USB_TXCOUNT */
-
-#define                  TX_COUNT  0x1fff     /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* Bit masks for USB_RXCSR */
-
-#define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
-#define               FIFO_FULL_R  0x2        /* FIFO not empty */
-#define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
-#define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
-#define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
-#define              STALL_SEND_R  0x20       /* issue a Stall handshake */
-#define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
-#define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
-#define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
-#define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
-#define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
-#define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
-#define                     ISO_R  0x4000     /* enable Isochronous transfers */
-#define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
-#define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
-#define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
-#define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
-#define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
-#define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
-#define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
-
-/* Bit masks for USB_RXCOUNT */
-
-#define                  RX_COUNT  0x1fff     /* Number of received bytes in the packet in the Rx FIFO */
-
-/* Bit masks for USB_TXTYPE */
-
-#define            TARGET_EP_NO_T  0xf        /* EP number */
-#define                PROTOCOL_T  0xc        /* transfer type */
-
-/* Bit masks for USB_TXINTERVAL */
-
-#define          TX_POLL_INTERVAL  0xff       /* polling interval for selected Tx EP */
-
-/* Bit masks for USB_RXTYPE */
-
-#define            TARGET_EP_NO_R  0xf        /* EP number */
-#define                PROTOCOL_R  0xc        /* transfer type */
-
-/* Bit masks for USB_RXINTERVAL */
-
-#define          RX_POLL_INTERVAL  0xff       /* polling interval for selected Rx EP */
-
-/* Bit masks for USB_DMA_INTERRUPT */
-
-#define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
-#define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
-#define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
-#define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
-#define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
-#define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
-#define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
-#define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
-
-/* Bit masks for USB_DMAxCONTROL */
-
-#define                   DMA_ENA  0x1        /* DMA enable */
-#define                 DIRECTION  0x2        /* direction of DMA transfer */
-#define                      MODE  0x4        /* DMA Bus error */
-#define                   INT_ENA  0x8        /* Interrupt enable */
-#define                     EPNUM  0xf0       /* EP number */
-#define                  BUSERROR  0x100      /* DMA Bus error */
-
-/* Bit masks for USB_DMAxADDRHIGH */
-
-#define             DMA_ADDR_HIGH  0xffff     /* Upper 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxADDRLOW */
-
-#define              DMA_ADDR_LOW  0xffff     /* Lower 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTHIGH */
-
-#define            DMA_COUNT_HIGH  0xffff     /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTLOW */
-
-#define             DMA_COUNT_LOW  0xffff     /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for HMDMAx_CONTROL */
-
-#define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
-#define                       REP  0x2        /* Handshake MDMA Request Polarity */
-#define                       UTE  0x8        /* Urgency Threshold Enable */
-#define                       OIE  0x10       /* Overflow Interrupt Enable */
-#define                      BDIE  0x20       /* Block Done Interrupt Enable */
-#define                      MBDI  0x40       /* Mask Block Done Interrupt */
-#define                       DRQ  0x300      /* Handshake MDMA Request Type */
-#define                       RBC  0x1000     /* Force Reload of BCOUNT */
-#define                        PS  0x2000     /* Pin Status */
-#define                        OI  0x4000     /* Overflow Interrupt Generated */
-#define                       BDI  0x8000     /* Block Done Interrupt Generated */
-
-/* ******************************************* */
-/*     MULTI BIT MACRO ENUMERATIONS            */
-/* ******************************************* */
-
-/* ************************ */
-/*   MXVR Address Offsets   */
-/* ************************ */
-
-/* Control Message Receive Buffer (CMRB) Address Offsets */
-
-#define CMRB_STRIDE       0x00000016lu
-
-#define CMRB_DST_OFFSET   0x00000000lu
-#define CMRB_SRC_OFFSET   0x00000002lu
-#define CMRB_DATA_OFFSET  0x00000005lu
-
-/* Control Message Transmit Buffer (CMTB) Address Offsets */
-
-#define CMTB_PRIO_OFFSET    0x00000000lu
-#define CMTB_DST_OFFSET     0x00000002lu
-#define CMTB_SRC_OFFSET     0x00000004lu
-#define CMTB_TYPE_OFFSET    0x00000006lu
-#define CMTB_DATA_OFFSET    0x00000007lu
-
-#define CMTB_ANSWER_OFFSET  0x0000000Alu
-
-#define CMTB_STAT_N_OFFSET  0x00000018lu
-#define CMTB_STAT_A_OFFSET  0x00000016lu
-#define CMTB_STAT_D_OFFSET  0x0000000Elu
-#define CMTB_STAT_R_OFFSET  0x00000014lu
-#define CMTB_STAT_W_OFFSET  0x00000014lu
-#define CMTB_STAT_G_OFFSET  0x00000014lu
-
-/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */
-
-#define APRB_STRIDE       0x00000400lu
-
-#define APRB_DST_OFFSET   0x00000000lu
-#define APRB_LEN_OFFSET   0x00000002lu
-#define APRB_SRC_OFFSET   0x00000004lu
-#define APRB_DATA_OFFSET  0x00000006lu
-
-/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */
-
-#define APTB_PRIO_OFFSET  0x00000000lu
-#define APTB_DST_OFFSET   0x00000002lu
-#define APTB_LEN_OFFSET   0x00000004lu
-#define APTB_SRC_OFFSET   0x00000006lu
-#define APTB_DATA_OFFSET  0x00000008lu
-
-/* Remote Read Buffer (RRDB) Address Offsets */
-
-#define RRDB_WADDR_OFFSET 0x00000100lu
-#define RRDB_WLEN_OFFSET  0x00000101lu
-
-/* **************** */
-/*   MXVR Macros    */
-/* **************** */
-
-/* MXVR_CONFIG Macros */
-
-#define SET_MSB(x)       ( ( (x) & 0xF  ) << 9)
-
-/* MXVR_INT_STAT_1 Macros */
-
-#define DONEX(x)         (0x00000002 << (4 * (x)))
-#define HDONEX(x)        (0x00000001 << (4 * (x)))
-
-/* MXVR_INT_EN_1 Macros */
-
-#define DONEENX(x)       (0x00000002 << (4 * (x)))
-#define HDONEENX(x)      (0x00000001 << (4 * (x)))
-
-/* MXVR_CDRPLL_CTL Macros */
-
-#define SET_CDRSHPSEL(x) ( ( (x) & 0x3F ) << 16)
-
-/* MXVR_FMPLL_CTL Macros */
-
-#define SET_CDRCPSEL(x)  ( ( (x) & 0xFF ) << 24)
-#define SET_FMCPSEL(x)   ( ( (x) & 0xFF ) << 24)
-
 #endif /* _DEF_BF549_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index 8590c8c..ab04d13 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -1609,44 +1609,6 @@
 #define                 PINT2  0x40000000 /* Pin Interrupt 2 */
 #define                 PINT3  0x80000000 /* Pin Interrupt 3 */
 
-/* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */
-
-#define                     DMAEN  0x1        /* DMA Channel Enable */
-#define                       WNR  0x2        /* DMA Direction */
-#define                  WDSIZE_8  0x0        /* Transfer Word Size = 8 */
-#define                 WDSIZE_16  0x4        /* Transfer Word Size = 16 */
-#define                 WDSIZE_32  0x8        /* Transfer Word Size = 32 */
-#define                     DMA2D  0x10       /* DMA Mode */
-#define                   RESTART  0x20       /* Work Unit Transitions */
-#define                    DI_SEL  0x40       /* Data Interrupt Timing Select */
-#define                     DI_EN  0x80       /* Data Interrupt Enable */
-
-#define                    NDSIZE  0xf00      /* Flex Descriptor Size */
-#define                  NDSIZE_0 0x0000      /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define                  NDSIZE_1 0x0100      /* Next Descriptor Size = 1 */
-#define                  NDSIZE_2 0x0200      /* Next Descriptor Size = 2 */
-#define                  NDSIZE_3 0x0300      /* Next Descriptor Size = 3 */
-#define                  NDSIZE_4 0x0400      /* Next Descriptor Size = 4 */
-#define                  NDSIZE_5 0x0500      /* Next Descriptor Size = 5 */
-#define                  NDSIZE_6 0x0600      /* Next Descriptor Size = 6 */
-#define                  NDSIZE_7 0x0700      /* Next Descriptor Size = 7 */
-#define                  NDSIZE_8 0x0800      /* Next Descriptor Size = 8 */
-#define                  NDSIZE_9 0x0900      /* Next Descriptor Size = 9 */
-
-#define                   DMAFLOW  0xf000     /* Next Operation */
-#define              DMAFLOW_STOP  0x0000     /* Stop Mode */
-#define              DMAFLOW_AUTO  0x1000     /* Autobuffer Mode */
-#define             DMAFLOW_ARRAY  0x4000     /* Descriptor Array Mode */
-#define             DMAFLOW_SMALL  0x6000     /* Small Model Descriptor List Mode */
-#define             DMAFLOW_LARGE  0x7000     /* Large Model Descriptor List Mode */
-
-/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
-
-#define                  DMA_DONE  0x1        /* DMA Completion Interrupt Status */
-#define                   DMA_ERR  0x2        /* DMA Error Interrupt Status */
-#define                    DFETCH  0x4        /* DMA Descriptor Fetch */
-#define                   DMA_RUN  0x8        /* DMA Channel Running */
-
 /* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
 
 #define                     CTYPE  0x40       /* DMA Channel Type */
@@ -1815,10 +1777,6 @@
 #define               DEB3_MERROR  0x40       /* DEB3 Error (2nd) */
 #define               CORE_MERROR  0x80       /* Core Error (2nd) */
 
-/* Bit masks for EBIU_ERRADD */
-
-#define             ERROR_ADDRESS  0xffffffff /* Error Address */
-
 /* Bit masks for EBIU_RSTCTL */
 
 #define                 DDRSRESET  0x1        /* DDR soft reset */
@@ -1827,98 +1785,6 @@
 #define                     SRACK  0x10       /* Self-refresh acknowledge */
 #define                MDDRENABLE  0x20       /* Mobile DDR enable */
 
-/* Bit masks for EBIU_DDRBRC0 */
-
-#define                      BRC0  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC1 */
-
-#define                      BRC1  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC2 */
-
-#define                      BRC2  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC3 */
-
-#define                      BRC3  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC4 */
-
-#define                      BRC4  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC5 */
-
-#define                      BRC5  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC6 */
-
-#define                      BRC6  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC7 */
-
-#define                      BRC7  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC0 */
-
-#define                      BWC0  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC1 */
-
-#define                      BWC1  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC2 */
-
-#define                      BWC2  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC3 */
-
-#define                      BWC3  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC4 */
-
-#define                      BWC4  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC5 */
-
-#define                      BWC5  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC6 */
-
-#define                      BWC6  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC7 */
-
-#define                      BWC7  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRACCT */
-
-#define                      ACCT  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRTACT */
-
-#define                      TECT  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRARCT */
-
-#define                      ARCT  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC0 */
-
-#define                       GC0  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC1 */
-
-#define                       GC1  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC2 */
-
-#define                       GC2  0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC3 */
-
-#define                       GC3  0xffffffff /* Count */
-
 /* Bit masks for EBIU_DDRMCEN */
 
 #define                B0WCENABLE  0x1        /* Bank 0 write count enable */
@@ -2092,12 +1958,6 @@
 #define                     TRUN6  0x40000000 /* Timer 6 Slave Enable Status */
 #define                     TRUN7  0x80000000 /* Timer 7 Slave Enable Status */
 
-/* Bit masks for WDOG_CTL */
-
-#define                      WDEV  0x6        /* Watchdog Event */
-#define                      WDEN  0xff0      /* Watchdog Enable */
-#define                      WDRO  0x8000     /* Watchdog Rolled Over */
-
 /* Bit masks for CNT_CONFIG */
 
 #define                      CNTE  0x1        /* Counter Enable */
@@ -2149,81 +2009,6 @@
 
 #define                 DPRESCALE  0xf        /* Load Counter Register */
 
-/* Bit masks for RTC_STAT */
-
-#define                   SECONDS  0x3f       /* Seconds */
-#define                   MINUTES  0xfc0      /* Minutes */
-#define                     HOURS  0x1f000    /* Hours */
-#define               DAY_COUNTER  0xfffe0000 /* Day Counter */
-
-/* Bit masks for RTC_ICTL */
-
-#define STOPWATCH_INTERRUPT_ENABLE  0x1        /* Stopwatch Interrupt Enable */
-#define    ALARM_INTERRUPT_ENABLE  0x2        /* Alarm Interrupt Enable */
-#define  SECONDS_INTERRUPT_ENABLE  0x4        /* Seconds Interrupt Enable */
-#define  MINUTES_INTERRUPT_ENABLE  0x8        /* Minutes Interrupt Enable */
-#define    HOURS_INTERRUPT_ENABLE  0x10       /* Hours Interrupt Enable */
-#define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE  0x20       /* 24 Hours Interrupt Enable */
-#define DAY_ALARM_INTERRUPT_ENABLE  0x40       /* Day Alarm Interrupt Enable */
-#define WRITE_COMPLETE_INTERRUPT_ENABLE  0x8000     /* Write Complete Interrupt Enable */
-
-/* Bit masks for RTC_ISTAT */
-
-#define      STOPWATCH_EVENT_FLAG  0x1        /* Stopwatch Event Flag */
-#define          ALARM_EVENT_FLAG  0x2        /* Alarm Event Flag */
-#define        SECONDS_EVENT_FLAG  0x4        /* Seconds Event Flag */
-#define        MINUTES_EVENT_FLAG  0x8        /* Minutes Event Flag */
-#define          HOURS_EVENT_FLAG  0x10       /* Hours Event Flag */
-#define TWENTY_FOUR_HOURS_EVENT_FLAG  0x20       /* 24 Hours Event Flag */
-#define      DAY_ALARM_EVENT_FLAG  0x40       /* Day Alarm Event Flag */
-#define     WRITE_PENDING__STATUS  0x4000     /* Write Pending  Status */
-#define            WRITE_COMPLETE  0x8000     /* Write Complete */
-
-/* Bit masks for RTC_SWCNT */
-
-#define           STOPWATCH_COUNT  0xffff     /* Stopwatch Count */
-
-/* Bit masks for RTC_ALARM */
-
-#define                   SECONDS  0x3f       /* Seconds */
-#define                   MINUTES  0xfc0      /* Minutes */
-#define                     HOURS  0x1f000    /* Hours */
-#define                       DAY  0xfffe0000 /* Day */
-
-/* Bit masks for RTC_PREN */
-
-#define                      PREN  0x1        /* Prescaler Enable */
-
-/* Bit masks for OTP_CONTROL */
-
-#define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
-#define                      FIEN  0x800      /* OTP/Fuse Interrupt Enable */
-#define                  FTESTDEC  0x1000     /* OTP/Fuse Test Decoder */
-#define                   FWRTEST  0x2000     /* OTP/Fuse Write Test */
-#define                     FRDEN  0x4000     /* OTP/Fuse Read Enable */
-#define                     FWREN  0x8000     /* OTP/Fuse Write Enable */
-
-/* Bit masks for OTP_BEN */
-
-#define                      FBEN  0xffff     /* OTP/Fuse Byte Enable */
-
-/* Bit masks for OTP_STATUS */
-
-#define                     FCOMP  0x1        /* OTP/Fuse Access Complete */
-#define                    FERROR  0x2        /* OTP/Fuse Access Error */
-#define                  MMRGLOAD  0x10       /* Memory Mapped Register Gasket Load */
-#define                  MMRGLOCK  0x20       /* Memory Mapped Register Gasket Lock */
-#define                    FPGMEN  0x40       /* OTP/Fuse Program Enable */
-
-/* Bit masks for OTP_TIMING */
-
-#define                   USECDIV  0xff       /* Micro Second Divider */
-#define                   READACC  0x7f00     /* Read Access Time */
-#define                   CPUMPRL  0x38000    /* Charge Pump Release Time */
-#define                   CPUMPSU  0xc0000    /* Charge Pump Setup Time */
-#define                   CPUMPHD  0xf00000   /* Charge Pump Hold Time */
-#define                   PGMTIME  0xff000000 /* Program Time */
-
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
@@ -2252,26 +2037,6 @@
 #define                    AFEXIT  0x10       /* Authentication Firmware Exit */
 #define                   SECSTAT  0xe0       /* Secure Status */
 
-/* Bit masks for PLL_DIV */
-
-#define                      CSEL  0x30       /* Core Select */
-#define                      SSEL  0xf        /* System Select */
-#define			CSEL_DIV1	0x0000	/* CCLK = VCO / 1 */
-#define			CSEL_DIV2	0x0010	/* CCLK = VCO / 2 */
-#define			CSEL_DIV4	0x0020	/* CCLK = VCO / 4 */
-#define			CSEL_DIV8	0x0030	/* CCLK = VCO / 8 */
-
-/* Bit masks for PLL_CTL */
-
-#define                      MSEL  0x7e00     /* Multiplier Select */
-#define                    BYPASS  0x100      /* PLL Bypass Enable */
-#define              OUTPUT_DELAY  0x80       /* External Memory Output Delay Enable */
-#define               INPUT_DELAY  0x40       /* External Memory Input Delay Enable */
-#define                      PDWN  0x20       /* Power Down */
-#define                    STOPCK  0x8        /* Stop Clock */
-#define                   PLL_OFF  0x2        /* Disable PLL */
-#define                        DF  0x1        /* Divide Frequency */
-
 /* SWRST Masks */
 #define              SYSTEM_RESET 0x0007       /* Initiates A System Software Reset */
 #define              DOUBLE_FAULT 0x0008       /* Core Double Fault Causes Reset */
@@ -2279,52 +2044,6 @@
 #define                RESET_WDOG 0x4000       /* SW Reset Generated By Watchdog Timer */
 #define            RESET_SOFTWARE 0x8000       /* SW Reset Occurred Since Last Read Of SWRST */
 
-/* Bit masks for PLL_STAT */
-
-#define                PLL_LOCKED  0x20       /* PLL Locked Status */
-#define        ACTIVE_PLLDISABLED  0x4        /* Active Mode With PLL Disabled */
-#define                   FULL_ON  0x2        /* Full-On Mode */
-#define         ACTIVE_PLLENABLED  0x1        /* Active Mode With PLL Enabled */
-#define                     RTCWS  0x400      /* RTC/Reset Wake-Up Status */
-#define                     CANWS  0x800      /* CAN Wake-Up Status */
-#define                     USBWS  0x2000     /* USB Wake-Up Status */
-#define                    KPADWS  0x4000     /* Keypad Wake-Up Status */
-#define                     ROTWS  0x8000     /* Rotary Wake-Up Status */
-#define                      GPWS  0x1000     /* General-Purpose Wake-Up Status */
-
-/* Bit masks for VR_CTL */
-
-#define                      FREQ  0x3        /* Regulator Switching Frequency */
-#define                      GAIN  0xc        /* Voltage Output Level Gain */
-#define                      VLEV  0xf0       /* Internal Voltage Level */
-#define                   SCKELOW  0x8000     /* Drive SCKE Low During Reset Enable */
-#define                      WAKE  0x100      /* RTC/Reset Wake-Up Enable */
-#define                     CANWE  0x200      /* CAN0/1 Wake-Up Enable */
-#define                      GPWE  0x400      /* General-Purpose Wake-Up Enable */
-#define                     USBWE  0x800      /* USB Wake-Up Enable */
-#define                    KPADWE  0x1000     /* Keypad Wake-Up Enable */
-#define                     ROTWE  0x2000     /* Rotary Wake-Up Enable */
-
-#define	FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
-#define	FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
-#define	FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
-
-#define	GAIN_5			0x0000	/* GAIN = 5*/
-#define	GAIN_10			0x0004	/* GAIN = 1*/
-#define	GAIN_20			0x0008	/* GAIN = 2*/
-#define	GAIN_50			0x000C	/* GAIN = 5*/
-
-#define	VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define	VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define	VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define	VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define	VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define	VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define	VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define	VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define	VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define	VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
 /* Bit masks for NFC_CTL */
 
 #define                    WR_DLY  0xf        /* Write Strobe Delay */
@@ -2489,14 +2208,6 @@
 #define                      UCCT  0x40       /* Universal Counter CAN Trigger */
 #define                       UCE  0x80       /* Universal Counter Enable */
 
-/* Bit masks for CAN0_UCCNT */
-
-#define                     UCCNT  0xffff     /* Universal Counter Count Value */
-
-/* Bit masks for CAN0_UCRC */
-
-#define                     UCVAL  0xffff     /* Universal Counter Reload/Capture Value */
-
 /* Bit masks for CAN0_CEC */
 
 #define                    RXECNT  0xff       /* Receive Error Counter */
diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig
index e4bc6d7..1aa529b 100644
--- a/arch/blackfin/mach-bf561/boards/Kconfig
+++ b/arch/blackfin/mach-bf561/boards/Kconfig
@@ -19,4 +19,11 @@
 	help
 	  CM-BF561 support for EVAL- and DEV-Board.
 
+config BFIN561_ACVILON
+	bool "BF561-ACVILON"
+	help
+	  BF561-ACVILON System On Module support (SO-DIMM 144).
+	  For more information about Acvilon BF561 SoM
+	  please go to http://www.niistt.ru/
+
 endchoice
diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
index 3a15255..a5879f7 100644
--- a/arch/blackfin/mach-bf561/boards/Makefile
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -2,6 +2,7 @@
 # arch/blackfin/mach-bf561/boards/Makefile
 #
 
+obj-$(CONFIG_BFIN561_ACVILON)          += acvilon.o
 obj-$(CONFIG_BFIN561_BLUETECHNIX_CM)   += cm_bf561.o
 obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN561_TEPLA)            += tepla.o
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
new file mode 100644
index 0000000..07e8dc8
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -0,0 +1,551 @@
+/*
+ * File:         arch/blackfin/mach-bf561/acvilon.c
+ * Based on:     arch/blackfin/mach-bf561/ezkit.c
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *               Copyright 2009 CJSC "NII STT"
+ *
+ * Bugs:
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ *
+ * For more information about Acvilon BF561 SoM please
+ * go to http://www.niistt.ru/
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <asm/cacheflush.h>
+#include <linux/i2c.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Acvilon board";
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
+	[0] = {
+	       .start = 0x20000000,
+	       .end = 0x20000000 + 0x000fffff,
+	       .flags = IORESOURCE_MEM,
+	       },
+	[1] = {
+	       .start = IRQ_PF15,
+	       .end = IRQ_PF15,
+	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	       },
+};
+
+static struct isp1760_platform_data isp1760_priv = {
+	.is_isp1761 = 0,
+	.port1_disable = 0,
+	.bus_width_16 = 1,
+	.port1_otg = 0,
+	.analog_oc = 0,
+	.dack_polarity_high = 0,
+	.dreq_polarity_high = 0,
+};
+
+static struct platform_device bfin_isp1760_device = {
+	.name = "isp1760-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1760_priv,
+		},
+	.num_resources = ARRAY_SIZE(bfin_isp1760_resources),
+	.resource = bfin_isp1760_resources,
+};
+#endif
+
+static struct resource bfin_i2c_pca_resources[] = {
+	{
+	 .name = "pca9564-regs",
+	 .start = 0x2C000000,
+	 .end = 0x2C000000 + 16,
+	 .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+	 }, {
+
+	     .start = IRQ_PF8,
+	     .end = IRQ_PF8,
+	     .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	     },
+};
+
+struct i2c_pca9564_pf_platform_data pca9564_platform_data = {
+	.gpio = -1,
+	.i2c_clock_speed = 330000,
+	.timeout = 10000
+};
+
+/* PCA9564 I2C Bus driver */
+static struct platform_device bfin_i2c_pca_device = {
+	.name = "i2c-pca-platform",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_i2c_pca_resources),
+	.resource = bfin_i2c_pca_resources,
+	.dev = {
+		.platform_data = &pca9564_platform_data,
+		}
+};
+
+/* I2C devices fitted. */
+static struct i2c_board_info acvilon_i2c_devs[] __initdata = {
+	{
+	 I2C_BOARD_INFO("ds1339", 0x68),
+	 },
+	{
+	 I2C_BOARD_INFO("tcn75", 0x49),
+	 },
+};
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+static struct platdata_mtd_ram mtd_ram_data = {
+	.mapname = "rootfs(RAM)",
+	.bankwidth = 4,
+};
+
+static struct resource mtd_ram_resource = {
+	.start = 0x4000000,
+	.end = 0x5ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mtd_ram_device = {
+	.name = "mtd-ram",
+	.id = 0,
+	.dev = {
+		.platform_data = &mtd_ram_data,
+		},
+	.num_resources = 1,
+	.resource = &mtd_ram_resource,
+};
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+static struct resource smsc911x_resources[] = {
+	{
+	 .name = "smsc911x-memory",
+	 .start = 0x28000000,
+	 .end = 0x28000000 + 0xFF,
+	 .flags = IORESOURCE_MEM,
+	 },
+	{
+	 .start = IRQ_PF7,
+	 .end = IRQ_PF7,
+	 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	 },
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_32BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+		},
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+	 .start = BFIN_UART_THR,
+	 .end = BFIN_UART_GCTL + 2,
+	 .flags = IORESOURCE_MEM,
+	 },
+	{
+	 .start = IRQ_UART_RX,
+	 .end = IRQ_UART_RX + 1,
+	 .flags = IORESOURCE_IRQ,
+	 },
+	{
+	 .start = IRQ_UART_ERROR,
+	 .end = IRQ_UART_ERROR,
+	 .flags = IORESOURCE_IRQ,
+	 },
+	{
+	 .start = CH_UART_TX,
+	 .end = CH_UART_TX,
+	 .flags = IORESOURCE_DMA,
+	 },
+	{
+	 .start = CH_UART_RX,
+	 .end = CH_UART_RX,
+	 .flags = IORESOURCE_DMA,
+	 },
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		/* Passed to driver */
+		.platform_data = &bfin_uart0_peripherals,
+		},
+};
+#endif
+#endif
+
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition bfin_plat_nand_partitions[] = {
+	{
+	 .name = "params(nand)",
+	 .size = 32 * 1024 * 1024,
+	 .offset = 0,
+	 }, {
+	     .name = "userfs(nand)",
+	     .size = MTDPART_SIZ_FULL,
+	     .offset = MTDPART_OFS_APPEND,
+	     },
+};
+#endif
+
+#define BFIN_NAND_PLAT_CLE 2
+#define BFIN_NAND_PLAT_ALE 3
+
+static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				    unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
+	else
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
+}
+
+#define BFIN_NAND_PLAT_READY GPIO_PF10
+static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(BFIN_NAND_PLAT_READY);
+}
+
+static struct platform_nand_data bfin_plat_nand_data = {
+	.chip = {
+		 .chip_delay = 30,
+#ifdef CONFIG_MTD_PARTITIONS
+		 .part_probe_types = part_probes,
+		 .partitions = bfin_plat_nand_partitions,
+		 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
+#endif
+		 },
+	.ctrl = {
+		 .cmd_ctrl = bfin_plat_nand_cmd_ctrl,
+		 .dev_ready = bfin_plat_nand_dev_ready,
+		 },
+};
+
+#define MAX(x, y) (x > y ? x : y)
+static struct resource bfin_plat_nand_resources = {
+	.start = 0x24000000,
+	.end = 0x24000000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
+	.flags = IORESOURCE_IO,
+};
+
+static struct platform_device bfin_async_nand_device = {
+	.name = "gen_nand",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_plat_nand_resources,
+	.dev = {
+		.platform_data = &bfin_plat_nand_data,
+		},
+};
+
+static void bfin_plat_nand_init(void)
+{
+	gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
+}
+#else
+static void bfin_plat_nand_init(void)
+{
+}
+#endif
+
+#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+	{
+	 .name = "bootloader",
+	 .size = 0x4200,
+	 .offset = 0,
+	 .mask_flags = MTD_CAP_ROM},
+	{
+	 .name = "u-boot",
+	 .size = 0x42000,
+	 .offset = MTDPART_OFS_APPEND,
+	 },
+	{
+	 .name = "u-boot(params)",
+	 .size = 0x4200,
+	 .offset = MTDPART_OFS_APPEND,
+	 },
+	{
+	 .name = "kernel",
+	 .size = 0x294000,
+	 .offset = MTDPART_OFS_APPEND,
+	 },
+	{
+	 .name = "params",
+	 .size = 0x42000,
+	 .offset = MTDPART_OFS_APPEND,
+	 },
+	{
+	 .name = "rootfs",
+	 .size = MTDPART_SIZ_FULL,
+	 .offset = MTDPART_OFS_APPEND,
+	 }
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+	.name = "SPI Dataflash",
+	.parts = bfin_spi_dataflash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+};
+
+/* DataFlash chip */
+static struct bfin5xx_spi_chip data_flash_chip_info = {
+	.enable_dma = 0,	/* use dma transfer with this chip */
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+	       .start = SPI0_REGBASE,
+	       .end = SPI0_REGBASE + 0xFF,
+	       .flags = IORESOURCE_MEM,
+	       },
+	[1] = {
+	       .start = CH_SPI,
+	       .end = CH_SPI,
+	       .flags = IORESOURCE_DMA,
+	       },
+	[2] = {
+	       .start = IRQ_SPI,
+	       .end = IRQ_SPI,
+	       .flags = IORESOURCE_IRQ,
+	       },
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,	/* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0,		/* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info,	/* Passed to driver */
+		},
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+	 .modalias = "spidev",
+	 .max_speed_hz = 3125000,	/* max spi clock (SCK) speed in HZ */
+	 .bus_num = 0,
+	 .chip_select = 3,
+	 .controller_data = &spidev_chip_info,
+	 },
+#endif
+#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+	{			/* DataFlash chip */
+	 .modalias = "mtd_dataflash",
+	 .max_speed_hz = 33250000,	/* max spi clock (SCK) speed in HZ */
+	 .bus_num = 0,		/* Framework bus number */
+	 .chip_select = 2,	/* Framework chip select */
+	 .platform_data = &bfin_spi_dataflash_data,
+	 .controller_data = &data_flash_chip_info,
+	 .mode = SPI_MODE_3,
+	 },
+#endif
+};
+
+static struct resource bfin_gpios_resources = {
+	.start = 31,
+/*      .end   = MAX_BLACKFIN_GPIOS - 1, */
+	.end = 32,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+static const unsigned int cclk_vlev_datasheet[] = {
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 300000000),
+	VRPAIR(VLEV_095, 313000000),
+	VRPAIR(VLEV_100, 350000000),
+	VRPAIR(VLEV_105, 400000000),
+	VRPAIR(VLEV_110, 444000000),
+	VRPAIR(VLEV_115, 450000000),
+	VRPAIR(VLEV_120, 475000000),
+	VRPAIR(VLEV_125, 500000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */ ,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+		},
+};
+
+static struct platform_device *acvilon_devices[] __initdata = {
+	&bfin_dpmc,
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+	&bfin_gpios_device,
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+	&smsc911x_device,
+#endif
+
+	&bfin_i2c_pca_device,
+
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+	&bfin_async_nand_device,
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+	&mtd_ram_device,
+#endif
+
+};
+
+static int __init acvilon_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+	bfin_plat_nand_init();
+	ret =
+	    platform_add_devices(acvilon_devices, ARRAY_SIZE(acvilon_devices));
+	if (ret < 0)
+		return ret;
+
+	i2c_register_board_info(0, acvilon_i2c_devs,
+				ARRAY_SIZE(acvilon_i2c_devs));
+
+	bfin_write_FIO0_FLAG_C(1 << 14);
+	msleep(5);
+	bfin_write_FIO0_FLAG_S(1 << 14);
+
+	spi_register_board_info(bfin_spi_board_info,
+				ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(acvilon_init);
+
+static struct platform_device *acvilon_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(acvilon_early_devices,
+				   ARRAY_SIZE(acvilon_early_devices));
+}
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 9e2d8cf..ffd3e6a 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -49,7 +49,7 @@
 };
 
 static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760-hcd",
+	.name           = "isp1760",
 	.id             = 0,
 	.dev = {
 		.platform_data = &isp1760_priv,
@@ -159,28 +159,6 @@
 };
 #endif
 
-#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
-static struct resource ax88180_resources[] = {
-	[0] = {
-		.start	= 0x2c000000,
-		.end	= 0x2c000000 + 0x8000,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PF10,
-		.end	= IRQ_PF10,
-		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
-	},
-};
-
-static struct platform_device ax88180_device = {
-	.name		= "ax88180",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ax88180_resources),
-	.resource	= ax88180_resources,
-};
-#endif
-
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 	{
@@ -421,10 +399,6 @@
 	&smc91x_device,
 #endif
 
-#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
-	&ax88180_device,
-#endif
-
 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 	&net2272_bfin_device,
 #endif
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index 1e60a92..deb2271 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -22,8 +22,8 @@
 #define CMD_COREB_STOP		3
 #define CMD_COREB_RESET		4
 
-static int
-coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long
+coreb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int ret = 0;
 
@@ -49,8 +49,8 @@
 }
 
 static const struct file_operations coreb_fops = {
-	.owner   = THIS_MODULE,
-	.ioctl   = coreb_ioctl,
+	.owner          = THIS_MODULE,
+	.unlocked_ioctl = coreb_ioctl,
 };
 
 static struct miscdevice coreb_dev = {
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index a31e509..4c8e36b 100644
--- a/arch/blackfin/mach-bf561/include/mach/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -884,65 +884,11 @@
 /* System MMR Register Bits */
 /******************************************************************************* */
 
-/* ********************* PLL AND RESET MASKS ************************ */
-
-/* PLL_CTL Masks */
-#define PLL_CLKIN              0x00000000	/* Pass CLKIN to PLL */
-#define PLL_CLKIN_DIV2         0x00000001	/* Pass CLKIN/2 to PLL */
-#define PLL_OFF                0x00000002	/* Shut off PLL clocks */
-#define STOPCK_OFF             0x00000008	/* Core clock off */
-#define PDWN                   0x00000020	/* Put the PLL in a Deep Sleep state */
-#define BYPASS                 0x00000100	/* Bypass the PLL */
-
 /* CHIPID Masks */
 #define CHIPID_VERSION         0xF0000000
 #define CHIPID_FAMILY          0x0FFFF000
 #define CHIPID_MANUFACTURE     0x00000FFE
 
-/* VR_CTL Masks																	*/
-#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
-#define	HIBERNATE		0x0000	/* Powerdown/Bypass On-Board Regulation	*/
-#define	FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
-#define	FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
-#define	FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
-
-#define	GAIN			0x000C	/* Voltage Level Gain	*/
-#define	GAIN_5			0x0000	/* GAIN = 5*/
-#define	GAIN_10			0x0004	/* GAIN = 1*/
-#define	GAIN_20			0x0008	/* GAIN = 2*/
-#define	GAIN_50			0x000C	/* GAIN = 5*/
-
-#define	VLEV			0x00F0	/* Internal Voltage Level */
-#define	VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define	VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define	VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define	VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define	VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define	VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define	VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define	VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define	VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define	VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
-#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
-#define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
-
-/* PLL_DIV Masks */
-#define SCLK_DIV(x)  (x)	/* SCLK = VCO / x */
-
-#define CSEL			0x30		/* Core Select */
-#define SSEL			0xf		/* System Select */
-#define CCLK_DIV1              0x00000000	/* CCLK = VCO / 1 */
-#define CCLK_DIV2              0x00000010	/* CCLK = VCO / 2 */
-#define CCLK_DIV4              0x00000020	/* CCLK = VCO / 4 */
-#define CCLK_DIV8              0x00000030	/* CCLK = VCO / 8 */
-
-/* PLL_STAT Masks																	*/
-#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled    */
-#define	FULL_ON				0x0002	/* Processor In Full On Mode                                    */
-#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled   */
-#define	PLL_LOCKED			0x0020	/* PLL_LOCKCNT Has Been Reached                                 */
-
 /* SICA_SYSCR Masks */
 #define COREB_SRAM_INIT		0x0020
 
@@ -1150,53 +1096,6 @@
 
 /* **********  DMA CONTROLLER MASKS  *********************8 */
 
-/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */
-#define DMAEN	        0x00000001	/* Channel Enable */
-#define WNR	   	0x00000002	/* Channel Direction (W/R*) */
-#define WDSIZE_8	0x00000000	/* Word Size 8 bits */
-#define WDSIZE_16	0x00000004	/* Word Size 16 bits */
-#define WDSIZE_32	0x00000008	/* Word Size 32 bits */
-#define DMA2D	        0x00000010	/* 2D/1D* Mode */
-#define RESTART         0x00000020	/* Restart */
-#define DI_SEL	        0x00000040	/* Data Interrupt Select */
-#define DI_EN	        0x00000080	/* Data Interrupt Enable */
-#define NDSIZE_0		0x0000	/* Next Descriptor Size = 0 (Stop/Autobuffer)   */
-#define NDSIZE_1		0x0100	/* Next Descriptor Size = 1                                             */
-#define NDSIZE_2		0x0200	/* Next Descriptor Size = 2                                             */
-#define NDSIZE_3		0x0300	/* Next Descriptor Size = 3                                             */
-#define NDSIZE_4		0x0400	/* Next Descriptor Size = 4                                             */
-#define NDSIZE_5		0x0500	/* Next Descriptor Size = 5                                             */
-#define NDSIZE_6		0x0600	/* Next Descriptor Size = 6                                             */
-#define NDSIZE_7		0x0700	/* Next Descriptor Size = 7                                             */
-#define NDSIZE_8		0x0800	/* Next Descriptor Size = 8                                             */
-#define NDSIZE_9		0x0900	/* Next Descriptor Size = 9                                             */
-#define NDSIZE	        0x00000900	/* Next Descriptor Size */
-#define DMAFLOW	        0x00007000	/* Flow Control */
-#define DMAFLOW_STOP		0x0000	/* Stop Mode */
-#define DMAFLOW_AUTO		0x1000	/* Autobuffer Mode */
-#define DMAFLOW_ARRAY		0x4000	/* Descriptor Array Mode */
-#define DMAFLOW_SMALL		0x6000	/* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE		0x7000	/* Large Model Descriptor List Mode */
-
-#define DMAEN_P	            	0	/* Channel Enable */
-#define WNR_P	            	1	/* Channel Direction (W/R*) */
-#define DMA2D_P	        	4	/* 2D/1D* Mode */
-#define RESTART_P	      	5	/* Restart */
-#define DI_SEL_P	     	6	/* Data Interrupt Select */
-#define DI_EN_P	            	7	/* Data Interrupt Enable */
-
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */
-
-#define DMA_DONE		0x00000001	/* DMA Done Indicator */
-#define DMA_ERR	        	0x00000002	/* DMA Error Indicator */
-#define DFETCH	            	0x00000004	/* Descriptor Fetch Indicator */
-#define DMA_RUN	            	0x00000008	/* DMA Running Indicator */
-
-#define DMA_DONE_P	    	0	/* DMA Done Indicator */
-#define DMA_ERR_P     		1	/* DMA Error Indicator */
-#define DFETCH_P     		2	/* Descriptor Fetch Indicator */
-#define DMA_RUN_P     		3	/* DMA Running Indicator */
-
 /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */
 
 #define CTYPE	            0x00000040	/* DMA Channel Type Indicator */
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index 510f576..0192532 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -52,8 +52,6 @@
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	local_irq_disable();
-
 	/* Clone setup for peripheral interrupt sources from CoreA. */
 	bfin_write_SICB_IMASK0(bfin_read_SICA_IMASK0());
 	bfin_write_SICB_IMASK1(bfin_read_SICA_IMASK1());
@@ -70,11 +68,6 @@
 	bfin_write_SICB_IAR7(bfin_read_SICA_IAR7());
 	SSYNC();
 
-	local_irq_enable();
-
-	/* Calibrate loops per jiffy value. */
-	calibrate_delay();
-
 	/* Store CPU-private information to the cpu_data array. */
 	bfin_setup_cpudata(cpu);
 
@@ -108,9 +101,13 @@
 		barrier();
 	}
 
-	spin_unlock(&boot_lock);
-
-	return cpu_isset(cpu, cpu_callin_map) ? 0 : -ENOSYS;
+	if (cpu_isset(cpu, cpu_callin_map)) {
+		cpu_set(cpu, cpu_online_map);
+		/* release the lock and let coreb run */
+		spin_unlock(&boot_lock);
+		return 0;
+	} else
+		panic("CPU%u: processor failed to boot\n", cpu);
 }
 
 void __init platform_request_ipi(irq_handler_t handler)
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
index ef6870e..d5cfe61 100644
--- a/arch/blackfin/mach-common/clocks-init.c
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -13,6 +13,7 @@
 #include <asm/dma.h>
 #include <asm/clocks.h>
 #include <asm/mem_init.h>
+#include <asm/dpmc.h>
 
 #define SDGCTL_WIDTH (1 << 31)	/* SDRAM external data path width */
 #define PLL_CTL_VAL \
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 0150650..7775828 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -13,7 +13,7 @@
 #include <linux/fs.h>
 #include <asm/blackfin.h>
 #include <asm/time.h>
-
+#include <asm/dpmc.h>
 
 /* this is the table of CCLK frequencies, in Hz */
 /* .index is the entry in the auxillary dpm_state_table[] */
@@ -138,7 +138,8 @@
 						 dpm_state_table[index].tscale);
 	}
 
-	policy->cpuinfo.transition_latency = (bfin_read_PLL_LOCKCNT() / (sclk / 1000000)) * 1000;
+	policy->cpuinfo.transition_latency = 50000; /* 50us assumed */
+
 	/*Now ,only support one cpu */
 	policy->cur = cclk;
 	cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu);
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index 8009a51..b037168 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -404,6 +404,21 @@
 	PM_SYS_PUSH(EBIU_FCTL)
 #endif
 
+#ifdef PORTCIO_FER
+	PM_SYS_PUSH16(PORTCIO_DIR)
+	PM_SYS_PUSH16(PORTCIO_INEN)
+	PM_SYS_PUSH16(PORTCIO)
+	PM_SYS_PUSH16(PORTCIO_FER)
+	PM_SYS_PUSH16(PORTDIO_DIR)
+	PM_SYS_PUSH16(PORTDIO_INEN)
+	PM_SYS_PUSH16(PORTDIO)
+	PM_SYS_PUSH16(PORTDIO_FER)
+	PM_SYS_PUSH16(PORTEIO_DIR)
+	PM_SYS_PUSH16(PORTEIO_INEN)
+	PM_SYS_PUSH16(PORTEIO)
+	PM_SYS_PUSH16(PORTEIO_FER)
+#endif
+
 	PM_SYS_PUSH16(SYSCR)
 
 	/* Save Core MMRs */
@@ -716,6 +731,21 @@
 	P0.L = lo(PLL_CTL);
 	PM_SYS_POP16(SYSCR)
 
+#ifdef PORTCIO_FER
+	PM_SYS_POP16(PORTEIO_FER)
+	PM_SYS_POP16(PORTEIO)
+	PM_SYS_POP16(PORTEIO_INEN)
+	PM_SYS_POP16(PORTEIO_DIR)
+	PM_SYS_POP16(PORTDIO_FER)
+	PM_SYS_POP16(PORTDIO)
+	PM_SYS_POP16(PORTDIO_INEN)
+	PM_SYS_POP16(PORTDIO_DIR)
+	PM_SYS_POP16(PORTCIO_FER)
+	PM_SYS_POP16(PORTCIO)
+	PM_SYS_POP16(PORTCIO_INEN)
+	PM_SYS_POP16(PORTCIO_DIR)
+#endif
+
 #ifdef EBIU_FCTL
 	PM_SYS_POP(EBIU_FCTL)
 	PM_SYS_POP(EBIU_MODE)
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index f3f8bb4..b0ed0b4 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -713,6 +713,8 @@
 	cc = BITTST(r7, TIF_RESTORE_SIGMASK);
 	if cc jump .Lsyscall_do_signals;
 	cc = BITTST(r7, TIF_SIGPENDING);
+	if cc jump .Lsyscall_do_signals;
+	cc = BITTST(r7, TIF_NOTIFY_RESUME);
 	if !cc jump .Lsyscall_really_exit;
 .Lsyscall_do_signals:
 	/* Reenable interrupts.  */
@@ -721,7 +723,7 @@
 
 	r0 = sp;
 	SP += -12;
-	call _do_signal;
+	call _do_notify_resume;
 	SP += 12;
 
 .Lsyscall_really_exit:
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 660ea1b..1873b2c 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -25,11 +25,20 @@
 #include <asm/blackfin.h>
 #include <asm/gpio.h>
 #include <asm/irq_handler.h>
+#include <asm/dpmc.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/bfin_sport.h>
 
 #define SIC_SYSIRQ(irq)	(irq - (IRQ_CORETMR + 1))
 
 #ifdef BF537_FAMILY
 # define BF537_GENERIC_ERROR_INT_DEMUX
+# define SPI_ERR_MASK   (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE)	/* SPI_STAT */
+# define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF)	/* SPORT_STAT */
+# define PPI_ERR_MASK   (0xFFFF & ~FLD)	/* PPI_STATUS */
+# define EMAC_ERR_MASK  (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE)	/* EMAC_SYSTAT */
+# define UART_ERR_MASK  (0x6)	/* UART_IIR */
+# define CAN_ERR_MASK   (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF)	/* CAN_GIF */
 #else
 # undef BF537_GENERIC_ERROR_INT_DEMUX
 #endif
@@ -324,11 +333,9 @@
 		irq = IRQ_CAN_ERROR;
 	else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
 		irq = IRQ_SPI_ERROR;
-	else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) &&
-		 (bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0))
+	else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
 		irq = IRQ_UART0_ERROR;
-	else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) &&
-		 (bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0))
+	else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
 		irq = IRQ_UART1_ERROR;
 
 	if (irq) {
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index d92b168..369e687 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -336,13 +336,6 @@
 
 	ret = platform_boot_secondary(cpu, idle);
 
-	if (ret) {
-		cpu_clear(cpu, cpu_present_map);
-		printk(KERN_CRIT "CPU%u: processor failed to boot (%d)\n", cpu, ret);
-		free_task(idle);
-	} else
-		cpu_set(cpu, cpu_online_map);
-
 	secondary_stack = NULL;
 
 	return ret;
@@ -418,9 +411,16 @@
 
 	setup_secondary(cpu);
 
+	platform_secondary_init(cpu);
+
 	local_irq_enable();
 
-	platform_secondary_init(cpu);
+	/*
+	 * Calibrate loops per jiffy value.
+	 * IRQs need to be enabled here - D-cache can be invalidated
+	 * in timer irq handler, so core B can read correct jiffies.
+	 */
+	calibrate_delay();
 
 	cpu_idle();
 }
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 6f31c94..31be3ac2 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -502,7 +502,7 @@
 
 config BFIN_OTP
 	tristate "Blackfin On-Chip OTP Memory Support"
-	depends on BLACKFIN && (BF52x || BF54x)
+	depends on BLACKFIN && (BF51x || BF52x || BF54x)
 	default y
 	help
 	  If you say Y here, you will get support for a character device