diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
new file mode 100644
index 0000000..950b39d
--- /dev/null
+++ b/arch/arm/mach-omap2/common.h
@@ -0,0 +1,185 @@
+/*
+ * Header for code common to all OMAP2+ machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
+
+#include <linux/delay.h>
+#include <plat/common.h>
+
+#ifdef CONFIG_SOC_OMAP2420
+extern void omap242x_map_common_io(void);
+#else
+static inline void omap242x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+extern void omap243x_map_common_io(void);
+#else
+static inline void omap243x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+extern void omap34xx_map_common_io(void);
+#else
+static inline void omap34xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPTI816X
+extern void omapti816x_map_common_io(void);
+#else
+static inline void omapti816x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+extern void omap44xx_map_common_io(void);
+#else
+static inline void omap44xx_map_common_io(void)
+{
+}
+#endif
+
+extern void omap2_init_common_infrastructure(void);
+
+extern struct sys_timer omap2_timer;
+extern struct sys_timer omap3_timer;
+extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap4_timer;
+
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void omap3_init_early(void);	/* Do not use this one */
+void am35xx_init_early(void);
+void ti816x_init_early(void);
+void omap4430_init_early(void);
+
+/*
+ * IO bases for various OMAP processors
+ * Except the tap base, rest all the io bases
+ * listed are physical addresses.
+ */
+struct omap_globals {
+	u32		class;		/* OMAP class to detect */
+	void __iomem	*tap;		/* Control module ID code */
+	void __iomem	*sdrc;           /* SDRAM Controller */
+	void __iomem	*sms;            /* SDRAM Memory Scheduler */
+	void __iomem	*ctrl;           /* System Control Module */
+	void __iomem	*ctrl_pad;	/* PAD Control Module */
+	void __iomem	*prm;            /* Power and Reset Management */
+	void __iomem	*cm;             /* Clock Management */
+	void __iomem	*cm2;
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_3xxx(void);
+void omap2_set_globals_443x(void);
+void omap2_set_globals_ti816x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+void omap242x_map_io(void);
+void omap243x_map_io(void);
+void omap3_map_io(void);
+void omap4_map_io(void);
+
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index)			\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
+extern struct device *omap2_get_mpuss_device(void);
+extern struct device *omap2_get_iva_device(void);
+extern struct device *omap2_get_l3_device(void);
+extern struct device *omap4_get_dsp_device(void);
+
+void omap2_init_irq(void);
+void omap3_init_irq(void);
+void ti816x_init_irq(void);
+extern int omap_irq_pending(void);
+void omap_intc_save_context(void);
+void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
+
+/*
+ * wfi used in low power code. Directly opcode is used instead
+ * of instruction to avoid mulit-omap build break
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+#define do_wfi() __asm__ __volatile__ ("wfi" : : : "memory")
+#else
+#define do_wfi()			\
+		__asm__ __volatile__ (".word	0xe320f003" : : : "memory")
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+extern void __iomem *l2cache_base;
+#endif
+
+extern void __iomem *gic_dist_base_addr;
+
+extern void __init gic_init_irq(void);
+extern void omap_smc1(u32 fn, u32 arg);
+
+#ifdef CONFIG_SMP
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
+#endif
+
+#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */