Merge branch 'late/clksrc' into late/cleanup
There is no reason to keep the clksrc cleanups separate from the
other cleanups, and this resolves some merge conflicts.
Conflicts:
arch/arm/mach-spear/spear13xx.c
drivers/irqchip/Makefile
diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt
index 64fc82b..0df6aca 100644
--- a/Documentation/devicetree/bindings/arm/primecell.txt
+++ b/Documentation/devicetree/bindings/arm/primecell.txt
@@ -16,14 +16,31 @@
- clocks : From common clock binding. First clock is phandle to clock for apb
pclk. Additional clocks are optional and specific to those peripherals.
- clock-names : From common clock binding. Shall be "apb_pclk" for first clock.
+- dmas : From common DMA binding. If present, refers to one or more dma channels.
+- dma-names : From common DMA binding, needs to match the 'dmas' property.
+ Devices with exactly one receive and transmit channel shall name
+ these "rx" and "tx", respectively.
+- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
+- pinctrl-names : Names corresponding to the numbered pinctrl states
+- interrupts : one or more interrupt specifiers
+- interrupt-names : names corresponding to the interrupts properties
Example:
serial@fff36000 {
compatible = "arm,pl011", "arm,primecell";
arm,primecell-periphid = <0x00341011>;
+
clocks = <&pclk>;
clock-names = "apb_pclk";
-
+
+ dmas = <&dma-controller 4>, <&dma-controller 5>;
+ dma-names = "rx", "tx";
+
+ pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
+ pinctrl-1 = <&uart0_sleep_mode>;
+ pinctrl-names = "default","sleep";
+
+ interrupts = <0 11 0x4>;
};
diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt
index 95ec7f8..2aff154 100644
--- a/Documentation/devicetree/bindings/ata/pata-arasan.txt
+++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt
@@ -6,6 +6,26 @@
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupt: Should contain the CF interrupt number
+- clock-frequency: Interface clock rate, in Hz, one of
+ 25000000
+ 33000000
+ 40000000
+ 50000000
+ 66000000
+ 75000000
+ 100000000
+ 125000000
+ 150000000
+ 166000000
+ 200000000
+
+Optional properties:
+- arasan,broken-udma: if present, UDMA mode is unusable
+- arasan,broken-mwdma: if present, MWDMA mode is unusable
+- arasan,broken-pio: if present, PIO mode is unusable
+- dmas: one DMA channel, as described in bindings/dma/dma.txt
+ required unless both UDMA and MWDMA mode are broken
+- dma-names: the corresponding channel name, must be "data"
Example:
@@ -14,4 +34,6 @@
reg = <0xfc000000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <12>;
+ dmas = <&dma-controller 23>;
+ dma-names = "data";
};
diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
new file mode 100644
index 0000000..5d2e840
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/pl011.txt
@@ -0,0 +1,17 @@
+* ARM AMBA Primecell PL011 serial UART
+
+Required properties:
+- compatible: must be "arm,primecell", "arm,pl011"
+- reg: exactly one register range with length 0x1000
+- interrupts: exactly one interrupt specifier
+
+Optional properties:
+- pinctrl: When present, must have one state named "sleep"
+ and one state named "default"
+- clocks: When present, must refer to exactly one clock named
+ "apb_pclk"
+- dmas: When present, may have one or two dma channels.
+ The first one must be named "rx", the second one
+ must be named "tx".
+
+See also bindings/arm/primecell.txt
diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt
index f158fd3..22ed679 100644
--- a/Documentation/devicetree/bindings/spi/spi_pl022.txt
+++ b/Documentation/devicetree/bindings/spi/spi_pl022.txt
@@ -16,6 +16,11 @@
device will be suspended immediately
- pl022,rt : indicates the controller should run the message pump with realtime
priority to minimise the transfer latency on the bus (boolean)
+- dmas : Two or more DMA channel specifiers following the convention outlined
+ in bindings/dma/dma.txt
+- dma-names: Names for the dma channels, if present. There must be at
+ least one channel named "tx" for transmit and named "rx" for
+ receive.
SPI slave nodes must be children of the SPI master node and can
@@ -32,3 +37,34 @@
- pl022,wait-state : Microwire interface: Wait state
- pl022,duplex : Microwire interface: Full/Half duplex
+
+Example:
+
+ spi@e0100000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0xe0100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 31 0x4>;
+ dmas = <&dma-controller 23 1>,
+ <&dma-controller 24 0>;
+ dma-names = "rx", "tx";
+
+ m25p80@1 {
+ compatible = "st,m25p80";
+ reg = <1>;
+ spi-max-frequency = <12000000>;
+ spi-cpol;
+ spi-cpha;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable;
+ pl022,com-mode = <0x2>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
+ };
+
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 4499bd9..95731a0 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -890,9 +890,8 @@
enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
power_save - Automatic power-saving timeout (in second, 0 =
disable)
- power_save_controller - Support runtime D3 of HD-audio controller
- (-1 = on for supported chip (default), false = off,
- true = force to on even for unsupported hardware)
+ power_save_controller - Reset HD-audio controller in power-saving mode
+ (default = on)
align_buffer_size - Force rounding of buffer/period sizes to multiples
of 128 bytes. This is more efficient in terms of memory
access but isn't required by the HDA spec and prevents
diff --git a/MAINTAINERS b/MAINTAINERS
index 74e58a4..836a618 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5065,9 +5065,8 @@
F: drivers/net/ethernet/marvell/sk*
MARVELL LIBERTAS WIRELESS DRIVER
-M: Dan Williams <dcbw@redhat.com>
L: libertas-dev@lists.infradead.org
-S: Maintained
+S: Orphan
F: drivers/net/wireless/libertas/
MARVELL MV643XX ETHERNET DRIVER
@@ -5569,6 +5568,7 @@
F: include/uapi/linux/netdevice.h
NETXEN (1/10) GbE SUPPORT
+M: Manish Chopra <manish.chopra@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: Rajesh Borundia <rajesh.borundia@qlogic.com>
L: netdev@vger.kernel.org
diff --git a/Makefile b/Makefile
index 58a165b..6db672b 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 9
SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Unicycling Gorilla
# *DOCUMENTATION*
diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index 4759fe7..2cc3cc5 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -12,7 +12,7 @@
LDFLAGS_vmlinux := -static -N #-relax
CHECKFLAGS += -D__alpha__ -m64
-cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y := -pipe -mno-fp-regs -ffixed-8
cflags-y += $(call cc-option, -fno-jump-tables)
cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4
diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h
index 46cefbd..bae97eb 100644
--- a/arch/alpha/include/asm/floppy.h
+++ b/arch/alpha/include/asm/floppy.h
@@ -26,7 +26,7 @@
#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
#define fd_cacheflush(addr,size) /* nothing */
#define fd_request_irq() request_irq(FLOPPY_IRQ, floppy_interrupt,\
- IRQF_DISABLED, "floppy", NULL)
+ 0, "floppy", NULL)
#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
#ifdef CONFIG_PCI
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 2872acc..7b2be25 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -117,13 +117,6 @@
return;
}
- /*
- * From here we must proceed with IPL_MAX. Note that we do not
- * explicitly enable interrupts afterwards - some MILO PALcode
- * (namely LX164 one) seems to have severe problems with RTI
- * at IPL 0.
- */
- local_irq_disable();
irq_enter();
generic_handle_irq_desc(irq, desc);
irq_exit();
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index 772ddfdb..f433fc1 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -45,6 +45,14 @@
unsigned long la_ptr, struct pt_regs *regs)
{
struct pt_regs *old_regs;
+
+ /*
+ * Disable interrupts during IRQ handling.
+ * Note that there is no matching local_irq_enable() due to
+ * severe problems with RTI at IPL0 and some MILO PALcode
+ * (namely LX164).
+ */
+ local_irq_disable();
switch (type) {
case 0:
#ifdef CONFIG_SMP
@@ -62,7 +70,6 @@
{
long cpu;
- local_irq_disable();
smp_percpu_timer_interrupt(regs);
cpu = smp_processor_id();
if (cpu != boot_cpuid) {
@@ -222,7 +229,6 @@
struct irqaction timer_irqaction = {
.handler = timer_interrupt,
- .flags = IRQF_DISABLED,
.name = "timer",
};
diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
index 4d4c046..1383f86 100644
--- a/arch/alpha/kernel/sys_nautilus.c
+++ b/arch/alpha/kernel/sys_nautilus.c
@@ -188,6 +188,10 @@
extern void free_reserved_mem(void *, void *);
extern void pcibios_claim_one_bus(struct pci_bus *);
+static struct resource irongate_io = {
+ .name = "Irongate PCI IO",
+ .flags = IORESOURCE_IO,
+};
static struct resource irongate_mem = {
.name = "Irongate PCI MEM",
.flags = IORESOURCE_MEM,
@@ -209,6 +213,7 @@
irongate = pci_get_bus_and_slot(0, 0);
bus->self = irongate;
+ bus->resource[0] = &irongate_io;
bus->resource[1] = &irongate_mem;
pci_bus_size_bridges(bus);
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index 5cf4a48..a53cf03 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -280,15 +280,15 @@
* all reported to the kernel as machine checks, so the handler
* is a nop so it can be called to count the individual events.
*/
- titan_request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(63+16, titan_intr_nop, 0,
"CChip Error", NULL);
- titan_request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(62+16, titan_intr_nop, 0,
"PChip 0 H_Error", NULL);
- titan_request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(61+16, titan_intr_nop, 0,
"PChip 1 H_Error", NULL);
- titan_request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(60+16, titan_intr_nop, 0,
"PChip 0 C_Error", NULL);
- titan_request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(59+16, titan_intr_nop, 0,
"PChip 1 C_Error", NULL);
/*
@@ -348,9 +348,9 @@
* Hook a couple of extra err interrupts that the
* common titan code won't.
*/
- titan_request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(53+16, titan_intr_nop, 0,
"NMI", NULL);
- titan_request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
+ titan_request_irq(50+16, titan_intr_nop, 0,
"Temperature Warning", NULL);
/*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1571a41..38b5d5d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -940,16 +940,8 @@
help
Support for the Nomadik platform by ST-Ericsson
-config PLAT_SPEAR
+config PLAT_SPEAR_SINGLE
bool "ST SPEAr"
- select ARCH_HAS_CPUFREQ
- select ARCH_REQUIRE_GPIOLIB
- select ARM_AMBA
- select CLKDEV_LOOKUP
- select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
help
Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
@@ -1111,7 +1103,7 @@
source "arch/arm/mach-socfpga/Kconfig"
-source "arch/arm/plat-spear/Kconfig"
+source "arch/arm/mach-spear/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
@@ -1191,9 +1183,9 @@
default 8
config IWMMXT
- bool "Enable iWMMXt support"
+ bool "Enable iWMMXt support" if !CPU_PJ4
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
- default y if PXA27x || PXA3xx || ARCH_MMP
+ default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
@@ -1447,6 +1439,16 @@
to deadlock. This workaround puts DSB before executing ISB if
an abort may occur on cache maintenance.
+config ARM_ERRATA_798181
+ bool "ARM errata: TLBI/DSB failure on Cortex-A15"
+ depends on CPU_V7 && SMP
+ help
+ On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
+ adequately shooting down all use of the old entries. This
+ option enables the Linux kernel workaround for this erratum
+ which sends an IPI to the CPUs that are running the same ASID
+ as the one being invalidated.
+
endmenu
source "arch/arm/common/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ee4605f..82765368 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -191,9 +191,7 @@
machine-$(CONFIG_ARCH_W90X900) += w90x900
machine-$(CONFIG_FOOTBRIDGE) += footbridge
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
-machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx
-machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx
-machine-$(CONFIG_MACH_SPEAR600) += spear6xx
+machine-$(CONFIG_PLAT_SPEAR) += spear
machine-$(CONFIG_ARCH_VIRT) += virt
machine-$(CONFIG_ARCH_ZYNQ) += zynq
machine-$(CONFIG_ARCH_SUNXI) += sunxi
@@ -207,7 +205,6 @@
plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_S3C24XX) += samsung
plat-$(CONFIG_PLAT_S5P) += samsung
-plat-$(CONFIG_PLAT_SPEAR) += spear
plat-$(CONFIG_PLAT_VERSATILE) += versatile
ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 08d298d..e35b0a7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -31,6 +31,11 @@
dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
+# sama5d3
+dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index dd0c57d..3234875 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -54,7 +54,7 @@
};
mvsdio@d00d4000 {
- pinctrl-0 = <&sdio_pins2>;
+ pinctrl-0 = <&sdio_pins3>;
pinctrl-names = "default";
status = "okay";
/*
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 8188d13..a195deb 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -59,6 +59,12 @@
"mpp50", "mpp51", "mpp52";
marvell,function = "sd0";
};
+
+ sdio_pins3: sdio-pins3 {
+ marvell,pins = "mpp48", "mpp49", "mpp50",
+ "mpp51", "mpp52", "mpp53";
+ marvell,function = "sd0";
+ };
};
gpio0: gpio@d0018100 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 6b1d4ca..2b6e30c 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -108,6 +108,7 @@
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
interrupts = <21 4 0>;
+ #dma-cells = <2>;
};
pinctrl@fffff200 {
@@ -512,6 +513,8 @@
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
interrupts = <11 4 0>;
+ dmas = <&dma 1 0>;
+ dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -521,6 +524,8 @@
compatible = "atmel,hsmci";
reg = <0xfffd0000 0x600>;
interrupts = <29 4 0>;
+ dmas = <&dma 1 13>;
+ dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 7750f98..b0bd704 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -89,6 +89,8 @@
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;
interrupts = <12 4 0>;
+ dmas = <&dma 1 0>;
+ dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -110,6 +112,7 @@
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
interrupts = <20 4 0>;
+ #dma-cells = <2>;
};
pinctrl@fffff400 {
@@ -360,6 +363,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8010000 0x100>;
interrupts = <9 4 6>;
+ dmas = <&dma 1 13>,
+ <&dma 1 14>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -369,6 +375,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8014000 0x100>;
interrupts = <10 4 6>;
+ dmas = <&dma 1 15>,
+ <&dma 1 16>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index a98c0d5..cbb9473 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -104,12 +104,14 @@
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
interrupts = <20 4 0>;
+ #dma-cells = <2>;
};
dma1: dma-controller@ffffee00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffee00 0x200>;
interrupts = <21 4 0>;
+ #dma-cells = <2>;
};
pinctrl@fffff400 {
@@ -399,6 +401,8 @@
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;
interrupts = <12 4 0>;
+ dmas = <&dma0 1 0>;
+ dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -408,6 +412,8 @@
compatible = "atmel,hsmci";
reg = <0xf000c000 0x600>;
interrupts = <26 4 0>;
+ dmas = <&dma1 1 0>;
+ dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -469,6 +475,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8010000 0x100>;
interrupts = <9 4 6>;
+ dmas = <&dma0 1 7>,
+ <&dma0 1 8>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -478,6 +487,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8014000 0x100>;
interrupts = <10 4 6>;
+ dmas = <&dma1 1 5>,
+ <&dma1 1 6>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -487,6 +499,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8018000 0x100>;
interrupts = <11 4 6>;
+ dmas = <&dma0 1 9>,
+ <&dma0 1 10>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 9de9309..aaa63d0 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -191,8 +191,8 @@
prcmu: prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
- reg = <0x80157000 0x1000>;
- reg-names = "prcmu";
+ reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+ reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
interrupts = <0 47 0x4>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index bd83b8f..c3573be 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -77,6 +77,7 @@
};
nand@3000000 {
+ chip-delay = <40>;
status = "okay";
partition@0 {
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 8aad00f..f7bec3b 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -13,6 +13,9 @@
compatible = "marvell,orion5x";
interrupt-parent = <&intc>;
+ aliases {
+ gpio0 = &gpio0;
+ };
intc: interrupt-controller {
compatible = "marvell,orion-intc", "marvell,intc";
interrupt-controller;
@@ -32,7 +35,9 @@
#gpio-cells = <2>;
gpio-controller;
reg = <0x10100 0x40>;
- ngpio = <32>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <6>, <7>, <8>, <9>;
};
@@ -91,7 +96,7 @@
reg = <0x90000 0x10000>,
<0xf2200000 0x800>;
reg-names = "regs", "sram";
- interrupts = <22>;
+ interrupts = <28>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
new file mode 100644
index 0000000..2e643ea
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -0,0 +1,1046 @@
+/*
+ * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
+ * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel SAMA5D3 family SoC";
+ compatible = "atmel,sama5d3", "atmel,sama5";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ gpio4 = &pioE;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ ssc0 = &ssc0;
+ ssc1 = &ssc1;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a5";
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mmc0: mmc@f0000000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf0000000 0x600>;
+ interrupts = <21 4 0>;
+ dmas = <&dma0 2 0>;
+ dma-names = "rxtx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi0: spi@f0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9x5-spi";
+ reg = <0xf0004000 0x100>;
+ interrupts = <24 4 3>;
+ cs-gpios = <&pioD 13 0
+ &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
+ &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
+ &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
+ >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ status = "disabled";
+ };
+
+ ssc0: ssc@f0008000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0008000 0x4000>;
+ interrupts = <38 4 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ status = "disabled";
+ };
+
+ can0: can@f000c000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf000c000 0x300>;
+ interrupts = <40 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_rx_tx>;
+ status = "disabled";
+ };
+
+ tcb0: timer@f0010000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf0010000 0x100>;
+ interrupts = <26 4 0>;
+ };
+
+ i2c0: i2c@f0014000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf0014000 0x4000>;
+ interrupts = <18 4 6>;
+ dmas = <&dma0 2 7>,
+ <&dma0 2 8>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@f0018000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf0018000 0x4000>;
+ interrupts = <19 4 6>;
+ dmas = <&dma0 2 9>,
+ <&dma0 2 10>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usart0: serial@f001c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf001c000 0x100>;
+ interrupts = <12 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
+ status = "disabled";
+ };
+
+ usart1: serial@f0020000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf0020000 0x100>;
+ interrupts = <13 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
+ status = "disabled";
+ };
+
+ macb0: ethernet@f0028000 {
+ compatible = "cnds,pc302-gem", "cdns,gem";
+ reg = <0xf0028000 0x100>;
+ interrupts = <34 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+ status = "disabled";
+ };
+
+ isi: isi@f0034000 {
+ compatible = "atmel,at91sam9g45-isi";
+ reg = <0xf0034000 0x4000>;
+ interrupts = <37 4 5>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@f8000000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf8000000 0x600>;
+ interrupts = <22 4 0>;
+ dmas = <&dma1 2 0>;
+ dma-names = "rxtx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc@f8004000 {
+ compatible = "atmel,hsmci";
+ reg = <0xf8004000 0x600>;
+ interrupts = <23 4 0>;
+ dmas = <&dma1 2 1>;
+ dma-names = "rxtx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@f8008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9x5-spi";
+ reg = <0xf8008000 0x100>;
+ interrupts = <25 4 3>;
+ cs-gpios = <&pioC 25 0
+ &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
+ &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
+ &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
+ >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ status = "disabled";
+ };
+
+ ssc1: ssc@f800c000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf800c000 0x4000>;
+ interrupts = <39 4 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ status = "disabled";
+ };
+
+ can1: can@f8010000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf8010000 0x300>;
+ interrupts = <41 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_rx_tx>;
+ };
+
+ tcb1: timer@f8014000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf8014000 0x100>;
+ interrupts = <27 4 0>;
+ };
+
+ adc0: adc@f8018000 {
+ compatible = "atmel,at91sam9260-adc";
+ reg = <0xf8018000 0x100>;
+ interrupts = <29 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_adc0_adtrg
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ &pinctrl_adc0_ad5
+ &pinctrl_adc0_ad6
+ &pinctrl_adc0_ad7
+ &pinctrl_adc0_ad8
+ &pinctrl_adc0_ad9
+ &pinctrl_adc0_ad10
+ &pinctrl_adc0_ad11
+ >;
+ atmel,adc-channel-base = <0x50>;
+ atmel,adc-channels-used = <0xfff>;
+ atmel,adc-drdy-mask = <0x1000000>;
+ atmel,adc-num-channels = <12>;
+ atmel,adc-startup-time = <40>;
+ atmel,adc-status-register = <0x30>;
+ atmel,adc-trigger-register = <0xc0>;
+ atmel,adc-use-external;
+ atmel,adc-vref = <3000>;
+ atmel,adc-res = <10 12>;
+ atmel,adc-res-names = "lowres", "highres";
+ status = "disabled";
+
+ trigger@0 {
+ trigger-name = "external-rising";
+ trigger-value = <0x1>;
+ trigger-external;
+ };
+ trigger@1 {
+ trigger-name = "external-falling";
+ trigger-value = <0x2>;
+ trigger-external;
+ };
+ trigger@2 {
+ trigger-name = "external-any";
+ trigger-value = <0x3>;
+ trigger-external;
+ };
+ trigger@3 {
+ trigger-name = "continuous";
+ trigger-value = <0x6>;
+ };
+ };
+
+ tsadcc: tsadcc@f8018000 {
+ compatible = "atmel,at91sam9x5-tsadcc";
+ reg = <0xf8018000 0x4000>;
+ interrupts = <29 4 5>;
+ atmel,tsadcc_clock = <300000>;
+ atmel,filtering_average = <0x03>;
+ atmel,pendet_debounce = <0x08>;
+ atmel,pendet_sensitivity = <0x02>;
+ atmel,ts_sample_hold_time = <0x0a>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@f801c000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf801c000 0x4000>;
+ interrupts = <20 4 6>;
+ dmas = <&dma1 2 11>,
+ <&dma1 2 12>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usart2: serial@f8020000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8020000 0x100>;
+ interrupts = <14 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
+ status = "disabled";
+ };
+
+ usart3: serial@f8024000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8024000 0x100>;
+ interrupts = <15 4 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
+ status = "disabled";
+ };
+
+ macb1: ethernet@f802c000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xf802c000 0x100>;
+ interrupts = <35 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb1_rmii>;
+ status = "disabled";
+ };
+
+ sha@f8034000 {
+ compatible = "atmel,sam9g46-sha";
+ reg = <0xf8034000 0x100>;
+ interrupts = <42 4 0>;
+ };
+
+ aes@f8038000 {
+ compatible = "atmel,sam9g46-aes";
+ reg = <0xf8038000 0x100>;
+ interrupts = <43 4 0>;
+ };
+
+ tdes@f803c000 {
+ compatible = "atmel,sam9g46-tdes";
+ reg = <0xf803c000 0x100>;
+ interrupts = <44 4 0>;
+ };
+
+ dma0: dma-controller@ffffe600 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffe600 0x200>;
+ interrupts = <30 4 0>;
+ #dma-cells = <2>;
+ };
+
+ dma1: dma-controller@ffffe800 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffe800 0x200>;
+ interrupts = <31 4 0>;
+ #dma-cells = <2>;
+ };
+
+ ramc0: ramc@ffffea00 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffea00 0x200>;
+ };
+
+ dbgu: serial@ffffee00 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xffffee00 0x200>;
+ interrupts = <2 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ status = "disabled";
+ };
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <3>;
+ compatible = "atmel,sama5d3-aic";
+ interrupt-controller;
+ reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <47>;
+ };
+
+ pinctrl@fffff200 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff200 0xfffff200 0xa00>;
+ atmel,mux-mask = <
+ /* A B C */
+ 0xffffffff 0xc0fc0000 0xc0ff0000 /* pioA */
+ 0xffffffff 0x0ff8ffff 0x00000000 /* pioB */
+ 0xffffffff 0xbc00f1ff 0x7c00fc00 /* pioC */
+ 0xffffffff 0xc001c0e0 0x0001c1e0 /* pioD */
+ 0xffffffff 0xbf9f8000 0x18000000 /* pioE */
+ >;
+
+ /* shared pinctrl settings */
+ adc0 {
+ pinctrl_adc0_adtrg: adc0_adtrg {
+ atmel,pins =
+ <3 19 0x1 0x0>; /* PD19 periph A ADTRG */
+ };
+ pinctrl_adc0_ad0: adc0_ad0 {
+ atmel,pins =
+ <3 20 0x1 0x0>; /* PD20 periph A AD0 */
+ };
+ pinctrl_adc0_ad1: adc0_ad1 {
+ atmel,pins =
+ <3 21 0x1 0x0>; /* PD21 periph A AD1 */
+ };
+ pinctrl_adc0_ad2: adc0_ad2 {
+ atmel,pins =
+ <3 22 0x1 0x0>; /* PD22 periph A AD2 */
+ };
+ pinctrl_adc0_ad3: adc0_ad3 {
+ atmel,pins =
+ <3 23 0x1 0x0>; /* PD23 periph A AD3 */
+ };
+ pinctrl_adc0_ad4: adc0_ad4 {
+ atmel,pins =
+ <3 24 0x1 0x0>; /* PD24 periph A AD4 */
+ };
+ pinctrl_adc0_ad5: adc0_ad5 {
+ atmel,pins =
+ <3 25 0x1 0x0>; /* PD25 periph A AD5 */
+ };
+ pinctrl_adc0_ad6: adc0_ad6 {
+ atmel,pins =
+ <3 26 0x1 0x0>; /* PD26 periph A AD6 */
+ };
+ pinctrl_adc0_ad7: adc0_ad7 {
+ atmel,pins =
+ <3 27 0x1 0x0>; /* PD27 periph A AD7 */
+ };
+ pinctrl_adc0_ad8: adc0_ad8 {
+ atmel,pins =
+ <3 28 0x1 0x0>; /* PD28 periph A AD8 */
+ };
+ pinctrl_adc0_ad9: adc0_ad9 {
+ atmel,pins =
+ <3 29 0x1 0x0>; /* PD29 periph A AD9 */
+ };
+ pinctrl_adc0_ad10: adc0_ad10 {
+ atmel,pins =
+ <3 30 0x1 0x0>; /* PD30 periph A AD10, conflicts with PCK0 */
+ };
+ pinctrl_adc0_ad11: adc0_ad11 {
+ atmel,pins =
+ <3 31 0x1 0x0>; /* PD31 periph A AD11, conflicts with PCK1 */
+ };
+ };
+
+ can0 {
+ pinctrl_can0_rx_tx: can0_rx_tx {
+ atmel,pins =
+ <3 14 0x3 0x0 /* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+ 3 15 0x3 0x0>; /* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+ };
+ };
+
+ can1 {
+ pinctrl_can1_rx_tx: can1_rx_tx {
+ atmel,pins =
+ <1 14 0x2 0x0 /* PB14 periph B RX, conflicts with GCRS */
+ 1 15 0x2 0x0>; /* PB15 periph B TX, conflicts with GCOL */
+ };
+ };
+
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <1 30 0x1 0x0 /* PB30 periph A */
+ 1 31 0x1 0x1>; /* PB31 periph A with pullup */
+ };
+ };
+
+ i2c0 {
+ pinctrl_i2c0: i2c0-0 {
+ atmel,pins =
+ <0 30 0x1 0x0 /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
+ 0 31 0x1 0x0>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1: i2c1-0 {
+ atmel,pins =
+ <2 26 0x2 0x0 /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
+ 2 27 0x2 0x0>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
+ };
+ };
+
+ isi {
+ pinctrl_isi: isi-0 {
+ atmel,pins =
+ <0 16 0x3 0x0 /* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
+ 0 17 0x3 0x0 /* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
+ 0 18 0x3 0x0 /* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
+ 0 19 0x3 0x0 /* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
+ 0 20 0x3 0x0 /* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
+ 0 21 0x3 0x0 /* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
+ 0 22 0x3 0x0 /* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
+ 0 23 0x3 0x0 /* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
+ 2 30 0x3 0x0 /* PC30 periph C ISI_PCK, conflicts with UTXD0 */
+ 0 31 0x3 0x0 /* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
+ 0 30 0x3 0x0 /* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+ 2 29 0x3 0x0 /* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+ 2 28 0x3 0x0>; /* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
+ };
+ pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
+ atmel,pins =
+ <3 31 0x2 0x0>; /* PD31 periph B ISI_MCK */
+ };
+ };
+
+ lcd {
+ pinctrl_lcd: lcd-0 {
+ atmel,pins =
+ <0 24 0x1 0x0 /* PA24 periph A LCDPWM */
+ 0 26 0x1 0x0 /* PA26 periph A LCDVSYNC */
+ 0 27 0x1 0x0 /* PA27 periph A LCDHSYNC */
+ 0 25 0x1 0x0 /* PA25 periph A LCDDISP */
+ 0 29 0x1 0x0 /* PA29 periph A LCDDEN */
+ 0 28 0x1 0x0 /* PA28 periph A LCDPCK */
+ 0 0 0x1 0x0 /* PA0 periph A LCDD0 pin */
+ 0 1 0x1 0x0 /* PA1 periph A LCDD1 pin */
+ 0 2 0x1 0x0 /* PA2 periph A LCDD2 pin */
+ 0 3 0x1 0x0 /* PA3 periph A LCDD3 pin */
+ 0 4 0x1 0x0 /* PA4 periph A LCDD4 pin */
+ 0 5 0x1 0x0 /* PA5 periph A LCDD5 pin */
+ 0 6 0x1 0x0 /* PA6 periph A LCDD6 pin */
+ 0 7 0x1 0x0 /* PA7 periph A LCDD7 pin */
+ 0 8 0x1 0x0 /* PA8 periph A LCDD8 pin */
+ 0 9 0x1 0x0 /* PA9 periph A LCDD9 pin */
+ 0 10 0x1 0x0 /* PA10 periph A LCDD10 pin */
+ 0 11 0x1 0x0 /* PA11 periph A LCDD11 pin */
+ 0 12 0x1 0x0 /* PA12 periph A LCDD12 pin */
+ 0 13 0x1 0x0 /* PA13 periph A LCDD13 pin */
+ 0 14 0x1 0x0 /* PA14 periph A LCDD14 pin */
+ 0 15 0x1 0x0 /* PA15 periph A LCDD15 pin */
+ 2 14 0x3 0x0 /* PC14 periph C LCDD16 pin */
+ 2 13 0x3 0x0 /* PC13 periph C LCDD17 pin */
+ 2 12 0x3 0x0 /* PC12 periph C LCDD18 pin */
+ 2 11 0x3 0x0 /* PC11 periph C LCDD19 pin */
+ 2 10 0x3 0x0 /* PC10 periph C LCDD20 pin */
+ 2 15 0x3 0x0 /* PC15 periph C LCDD21 pin */
+ 4 27 0x3 0x0 /* PE27 periph C LCDD22 pin */
+ 4 28 0x3 0x0>; /* PE28 periph C LCDD23 pin */
+ };
+ };
+
+ macb0 {
+ pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A GTX0, conflicts with PWMH0 */
+ 1 1 0x1 0x0 /* PB1 periph A GTX1, conflicts with PWML0 */
+ 1 2 0x1 0x0 /* PB2 periph A GTX2, conflicts with TK1 */
+ 1 3 0x1 0x0 /* PB3 periph A GTX3, conflicts with TF1 */
+ 1 4 0x1 0x0 /* PB4 periph A GRX0, conflicts with PWMH1 */
+ 1 5 0x1 0x0 /* PB5 periph A GRX1, conflicts with PWML1 */
+ 1 6 0x1 0x0 /* PB6 periph A GRX2, conflicts with TD1 */
+ 1 7 0x1 0x0>; /* PB7 periph A GRX3, conflicts with RK1 */
+ };
+ pinctrl_macb0_data_gmii: macb0_data_gmii {
+ atmel,pins =
+ <1 19 0x2 0x0 /* PB19 periph B GTX4, conflicts with MCI1_CDA */
+ 1 20 0x2 0x0 /* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+ 1 21 0x2 0x0 /* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+ 1 22 0x2 0x0 /* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+ 1 23 0x2 0x0 /* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+ 1 24 0x2 0x0 /* PB24 periph B GRX5, conflicts with MCI1_CK */
+ 1 25 0x2 0x0 /* PB25 periph B GRX6, conflicts with SCK1 */
+ 1 26 0x2 0x0>; /* PB26 periph B GRX7, conflicts with CTS1 */
+ };
+ pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+ atmel,pins =
+ <1 8 0x1 0x0 /* PB8 periph A GTXCK, conflicts with PWMH2 */
+ 1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */
+ 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */
+ 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */
+ 1 16 0x1 0x0 /* PB16 periph A GMDC */
+ 1 17 0x1 0x0 /* PB17 periph A GMDIO */
+ 1 18 0x1 0x0>; /* PB18 periph A G125CK */
+ };
+ pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+ atmel,pins =
+ <1 9 0x1 0x0 /* PB9 periph A GTXEN, conflicts with PWML2 */
+ 1 10 0x1 0x0 /* PB10 periph A GTXER, conflicts with RF1 */
+ 1 11 0x1 0x0 /* PB11 periph A GRXCK, conflicts with RD1 */
+ 1 12 0x1 0x0 /* PB12 periph A GRXDV, conflicts with PWMH3 */
+ 1 13 0x1 0x0 /* PB13 periph A GRXER, conflicts with PWML3 */
+ 1 14 0x1 0x0 /* PB14 periph A GCRS, conflicts with CANRX1 */
+ 1 15 0x1 0x0 /* PB15 periph A GCOL, conflicts with CANTX1 */
+ 1 16 0x1 0x0 /* PB16 periph A GMDC */
+ 1 17 0x1 0x0 /* PB17 periph A GMDIO */
+ 1 27 0x2 0x0>; /* PB27 periph B G125CKO */
+ };
+
+ };
+
+ macb1 {
+ pinctrl_macb1_rmii: macb1_rmii-0 {
+ atmel,pins =
+ <2 0 0x1 0x0 /* PC0 periph A ETX0, conflicts with TIOA3 */
+ 2 1 0x1 0x0 /* PC1 periph A ETX1, conflicts with TIOB3 */
+ 2 2 0x1 0x0 /* PC2 periph A ERX0, conflicts with TCLK3 */
+ 2 3 0x1 0x0 /* PC3 periph A ERX1, conflicts with TIOA4 */
+ 2 4 0x1 0x0 /* PC4 periph A ETXEN, conflicts with TIOB4 */
+ 2 5 0x1 0x0 /* PC5 periph A ECRSDV,conflicts with TCLK4 */
+ 2 6 0x1 0x0 /* PC6 periph A ERXER, conflicts with TIOA5 */
+ 2 7 0x1 0x0 /* PC7 periph A EREFCK, conflicts with TIOB5 */
+ 2 8 0x1 0x0 /* PC8 periph A EMDC, conflicts with TCLK5 */
+ 2 9 0x1 0x0>; /* PC9 periph A EMDIO */
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+ atmel,pins =
+ <3 9 0x1 0x0 /* PD9 periph A MCI0_CK */
+ 3 0 0x1 0x1 /* PD0 periph A MCI0_CDA with pullup */
+ 3 1 0x1 0x1>; /* PD1 periph A MCI0_DA0 with pullup */
+ };
+ pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+ atmel,pins =
+ <3 2 0x1 0x1 /* PD2 periph A MCI0_DA1 with pullup */
+ 3 3 0x1 0x1 /* PD3 periph A MCI0_DA2 with pullup */
+ 3 4 0x1 0x1>; /* PD4 periph A MCI0_DA3 with pullup */
+ };
+ pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+ atmel,pins =
+ <3 5 0x1 0x1 /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
+ 3 6 0x1 0x1 /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
+ 3 7 0x1 0x1 /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
+ 3 8 0x1 0x1>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
+ };
+ };
+
+ mmc1 {
+ pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+ atmel,pins =
+ <1 24 0x1 0x0 /* PB24 periph A MCI1_CK, conflicts with GRX5 */
+ 1 19 0x1 0x1 /* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
+ 1 20 0x1 0x1>; /* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
+ };
+ pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+ atmel,pins =
+ <1 21 0x1 0x1 /* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
+ 1 22 0x1 0x1 /* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
+ 1 23 0x1 0x1>; /* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
+ };
+ };
+
+ mmc2 {
+ pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+ atmel,pins =
+ <2 15 0x1 0x0 /* PC15 periph A MCI2_CK, conflicts with PCK2 */
+ 2 10 0x1 0x1 /* PC10 periph A MCI2_CDA with pullup */
+ 2 11 0x1 0x1>; /* PC11 periph A MCI2_DA0 with pullup */
+ };
+ pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+ atmel,pins =
+ <2 12 0x1 0x0 /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+ 2 13 0x1 0x0 /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+ 2 14 0x1 0x0>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+ };
+ };
+
+ nand0 {
+ pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
+ atmel,pins =
+ <4 21 0x1 0x1 /* PE21 periph A with pullup */
+ 4 22 0x1 0x1>; /* PE22 periph A with pullup */
+ };
+ };
+
+ pioA: gpio@fffff200 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff200 0x100>;
+ interrupts = <6 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff400 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x100>;
+ interrupts = <7 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff600 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x100>;
+ interrupts = <8 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffff800 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x100>;
+ interrupts = <9 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioE: gpio@fffffa00 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x100>;
+ interrupts = <10 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <3 10 0x1 0x0 /* PD10 periph A SPI0_MISO pin */
+ 3 11 0x1 0x0 /* PD11 periph A SPI0_MOSI pin */
+ 3 12 0x1 0x0 /* PD12 periph A SPI0_SPCK pin */
+ 3 13 0x0 0x0>; /* PD13 GPIO SPI0_NPCS0 pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <2 22 0x1 0x0 /* PC22 periph A SPI1_MISO pin */
+ 2 23 0x1 0x0 /* PC23 periph A SPI1_MOSI pin */
+ 2 24 0x1 0x0 /* PC24 periph A SPI1_SPCK pin */
+ 2 25 0x0 0x0>; /* PC25 GPIO SPI1_NPCS0 pin */
+ };
+ };
+
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx {
+ atmel,pins =
+ <2 16 0x1 0x0 /* PC16 periph A TK0 */
+ 2 17 0x1 0x0 /* PC17 periph A TF0 */
+ 2 18 0x1 0x0>; /* PC18 periph A TD0 */
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx {
+ atmel,pins =
+ <2 19 0x1 0x0 /* PC19 periph A RK0 */
+ 2 20 0x1 0x0 /* PC20 periph A RF0 */
+ 2 21 0x1 0x0>; /* PC21 periph A RD0 */
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx {
+ atmel,pins =
+ <1 2 0x2 0x0 /* PB2 periph B TK1, conflicts with GTX2 */
+ 1 3 0x2 0x0 /* PB3 periph B TF1, conflicts with GTX3 */
+ 1 6 0x2 0x0>; /* PB6 periph B TD1, conflicts with TD1 */
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx {
+ atmel,pins =
+ <1 7 0x2 0x0 /* PB7 periph B RK1, conflicts with EREFCK */
+ 1 10 0x2 0x0 /* PB10 periph B RF1, conflicts with GTXER */
+ 1 11 0x2 0x0>; /* PB11 periph B RD1, conflicts with GRXCK */
+ };
+ };
+
+ uart0 {
+ pinctrl_uart0: uart0-0 {
+ atmel,pins =
+ <2 29 0x1 0x0 /* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
+ 2 30 0x1 0x1>; /* PC30 periph A with pullup, conflicts with ISI_PCK */
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1: uart1-0 {
+ atmel,pins =
+ <0 30 0x2 0x0 /* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
+ 0 31 0x2 0x1>; /* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
+ };
+ };
+
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <3 17 0x1 0x0 /* PD17 periph A */
+ 3 18 0x1 0x1>; /* PD18 periph A with pullup */
+ };
+
+ pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
+ atmel,pins =
+ <3 15 0x1 0x0 /* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
+ 3 16 0x1 0x0>; /* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <1 28 0x1 0x0 /* PB28 periph A */
+ 1 29 0x1 0x1>; /* PB29 periph A with pullup */
+ };
+
+ pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
+ atmel,pins =
+ <1 26 0x1 0x0 /* PB26 periph A, conflicts with GRX7 */
+ 1 27 0x1 0x0>; /* PB27 periph A, conflicts with G125CKO */
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <4 25 0x2 0x0 /* PE25 periph B, conflicts with A25 */
+ 4 26 0x2 0x1>; /* PE26 periph B with pullup, conflicts NCS0 */
+ };
+
+ pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
+ atmel,pins =
+ <4 23 0x2 0x0 /* PE23 periph B, conflicts with A23 */
+ 4 24 0x2 0x0>; /* PE24 periph B, conflicts with A24 */
+ };
+ };
+
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <4 18 0x2 0x0 /* PE18 periph B, conflicts with A18 */
+ 4 19 0x2 0x1>; /* PE19 periph B with pullup, conflicts with A19 */
+ };
+
+ pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
+ atmel,pins =
+ <4 16 0x2 0x0 /* PE16 periph B, conflicts with A16 */
+ 4 17 0x2 0x0>; /* PE17 periph B, conflicts with A17 */
+ };
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x120>;
+ };
+
+ rstc@fffffe00 {
+ compatible = "atmel,at91sam9g45-rstc";
+ reg = <0xfffffe00 0x10>;
+ };
+
+ pit: timer@fffffe30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffe30 0xf>;
+ interrupts = <3 4 5>;
+ };
+
+ watchdog@fffffe40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffe40 0x10>;
+ status = "disabled";
+ };
+
+ rtc@fffffeb0 {
+ compatible = "atmel,at91rm9200-rtc";
+ reg = <0xfffffeb0 0x30>;
+ interrupts = <1 4 7>;
+ };
+ };
+
+ usb0: gadget@00500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9rl-udc";
+ reg = <0x00500000 0x100000
+ 0xf8030000 0x4000>;
+ interrupts = <33 4 2>;
+ status = "disabled";
+
+ ep0 {
+ reg = <0>;
+ atmel,fifo-size = <64>;
+ atmel,nb-banks = <1>;
+ };
+
+ ep1 {
+ reg = <1>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep2 {
+ reg = <2>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep3 {
+ reg = <3>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep4 {
+ reg = <4>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep5 {
+ reg = <5>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep6 {
+ reg = <6>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep7 {
+ reg = <7>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ };
+
+ ep8 {
+ reg = <8>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep9 {
+ reg = <9>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep10 {
+ reg = <10>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep11 {
+ reg = <11>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep12 {
+ reg = <12>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep13 {
+ reg = <13>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep14 {
+ reg = <14>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+
+ ep15 {
+ reg = <15>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ };
+ };
+
+ usb1: ohci@00600000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00600000 0x100000>;
+ interrupts = <32 4 2>;
+ status = "disabled";
+ };
+
+ usb2: ehci@00700000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00700000 0x100000>;
+ interrupts = <32 4 2>;
+ status = "disabled";
+ };
+
+ nand0: nand@60000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = < 0x60000000 0x01000000 /* EBI CS3 */
+ 0xffffc070 0x00000490 /* SMC PMECC regs */
+ 0xffffc500 0x00000100 /* SMC PMECC Error Location regs */
+ 0x00100000 0x00100000 /* ROM code */
+ 0x70000000 0x10000000 /* NFC Command Registers */
+ 0xffffc000 0x00000070 /* NFC HSMC regs */
+ 0x00200000 0x00100000 /* NFC SRAM banks */
+ >;
+ interrupts = <5 4 6>;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand0_ale_cle>;
+ atmel,pmecc-lookup-table-offset = <0x10000 0x18000>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
new file mode 100644
index 0000000..fa5d216
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -0,0 +1,51 @@
+/*
+ * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+/include/ "sama5d3xdm.dtsi"
+
+/ {
+ model = "Atmel SAMA5D31-EK";
+ compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@f0008000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ d3 {
+ label = "d3";
+ gpios = <&pioE 24 0>;
+ };
+ };
+
+ sound {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts
new file mode 100644
index 0000000..c38c943
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d33ek.dts
@@ -0,0 +1,44 @@
+/*
+ * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+/include/ "sama5d3xdm.dtsi"
+
+/ {
+ model = "Atmel SAMA5D33-EK";
+ compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@f0008000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f0028000 {
+ status = "okay";
+ };
+ };
+ };
+
+ sound {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
new file mode 100644
index 0000000..6bebfcd
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -0,0 +1,61 @@
+/*
+ * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+/include/ "sama5d3xdm.dtsi"
+
+/ {
+ model = "Atmel SAMA5D34-EK";
+ compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@f0008000 {
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+
+ 24c256@50 {
+ compatible = "24c256";
+ reg = <0x50>;
+ pagesize = <64>;
+ };
+ };
+
+ macb0: ethernet@f0028000 {
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ d3 {
+ label = "d3";
+ gpios = <&pioE 24 0>;
+ };
+ };
+
+ sound {
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
new file mode 100644
index 0000000..a488fc4
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -0,0 +1,56 @@
+/*
+ * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "sama5d3xmb.dtsi"
+
+/ {
+ model = "Atmel SAMA5D35-EK";
+ compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ spi0: spi@f0004000 {
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f0028000 {
+ status = "okay";
+ };
+
+ isi: isi@f0034000 {
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pb_user1 {
+ label = "pb_user1";
+ gpios = <&pioE 27 0>;
+ linux,code = <0x100>;
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
new file mode 100644
index 0000000..1f8ed40
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -0,0 +1,91 @@
+/*
+ * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "sama5d3.dtsi"
+
+/ {
+ compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+ };
+
+ memory {
+ reg = <0x20000000 0x20000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ macb0: ethernet@f0028000 {
+ phy-mode = "rgmii";
+ };
+ };
+
+ nand0: nand@60000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ atmel,has-nfc;
+ atmel,use-nfc-sram;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ d2 {
+ label = "d2";
+ gpios = <&pioE 25 1>; /* PE25, conflicts with A25, RXD2 */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi
new file mode 100644
index 0000000..4b8830e
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xdm.dtsi
@@ -0,0 +1,42 @@
+/*
+ * sama5d3dm.dtsi - Device Tree file for SAMA5 display module
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ ahb {
+ apb {
+ i2c1: i2c@f0018000 {
+ qt1070: keyboard@1b {
+ compatible = "qt1070";
+ reg = <0x1b>;
+ interrupt-parent = <&pioE>;
+ interrupts = <31 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qt1070_irq>;
+ };
+ };
+
+ adc0: adc@f8018000 {
+ status = "disabled";
+ };
+
+ tsadcc: tsadcc@f8018000 {
+ status = "okay";
+ };
+
+ pinctrl@fffff200 {
+ board {
+ pinctrl_qt1070_irq: qt1070_irq {
+ atmel,pins =
+ <4 31 0x0 0x5>; /* PE31 GPIO with pull up deglith */
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
new file mode 100644
index 0000000..661d7ca
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -0,0 +1,166 @@
+/*
+ * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/include/ "sama5d3xcm.dtsi"
+
+/ {
+ compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ apb {
+ mmc0: mmc@f0000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 17 0>;
+ };
+ };
+
+ spi0: spi@f0004000 {
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
+
+ /*
+ * i2c0 conflicts with ISI:
+ * disable it to allow the use of ISI
+ * can not enable audio when i2c0 disabled
+ */
+ i2c0: i2c@f0014000 {
+ wm8904: wm8904@1a {
+ compatible = "wm8904";
+ reg = <0x1a>;
+ };
+ };
+
+ usart1: serial@f0020000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+ status = "okay";
+ };
+
+ isi: isi@f0034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+ };
+
+ mmc1: mmc@f8000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioD 18 0>;
+ };
+ };
+
+ adc0: adc@f8018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_adc0_adtrg
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ >;
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ phy-mode = "rmii";
+ };
+
+ pinctrl@fffff200 {
+ board {
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins =
+ <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */
+ };
+
+ pinctrl_mmc1_cd: mmc1_cd {
+ atmel,pins =
+ <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */
+ };
+
+ pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+ atmel,pins =
+ <3 30 0x2 0x0>; /* PD30 periph B */
+ };
+
+ pinctrl_isi_reset: isi_reset-0 {
+ atmel,pins =
+ <4 24 0x0 0x0>; /* PE24 gpio */
+ };
+
+ pinctrl_isi_power: isi_power-0 {
+ atmel,pins =
+ <4 29 0x0 0x0>; /* PE29 gpio */
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */
+ };
+ };
+ };
+
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ watchdog@fffffe40 {
+ status = "okay";
+ };
+ };
+
+ usb0: gadget@00500000 {
+ atmel,vbus-gpio = <&pioD 29 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00600000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <&pioD 25 0
+ &pioD 26 1
+ &pioD 27 1
+ >;
+ status = "okay";
+ };
+
+ usb2: ehci@00700000 {
+ status = "okay";
+ };
+ };
+
+ sound {
+ compatible = "atmel,sama5d3ek-wm8904";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+ atmel,model = "wm8904 @ SAMA5D3EK";
+ atmel,audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN2L", "Line In Jack",
+ "IN2R", "Line In Jack",
+ "IN1L", "Mic";
+
+ atmel,ssc-controller = <&ssc0>;
+ atmel,audio-codec = <&wm8904>;
+ };
+};
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index 34da11a..e1786a0 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -113,6 +113,9 @@
reg = <0xb4100000 0x1000>;
interrupts = <0 105 0x4>;
status = "disabled";
+ dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */
+ <&dwdma0 0x680 0 1 0>; /* 0xD << 7 */
+ dma-names = "tx", "rx";
};
thermal@e07008c4 {
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index b4ca60f..45597fd 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -98,13 +98,24 @@
reg = <0xb2800000 0x1000>;
interrupts = <0 29 0x4>;
status = "disabled";
+ dmas = <&dwdma0 0 0 0 0>;
+ dma-names = "data";
};
- dma@ea800000 {
+ dwdma0: dma@ea800000 {
compatible = "snps,dma-spear1340";
reg = <0xea800000 0x1000>;
interrupts = <0 19 0x4>;
status = "disabled";
+
+ dma-channels = <8>;
+ #dma-cells = <3>;
+ dma-requests = <32>;
+ chan_allocation_order = <1>;
+ chan_priority = <1>;
+ block_size = <0xfff>;
+ dma-masters = <2>;
+ data_width = <3 3 0 0>;
};
dma@eb000000 {
@@ -112,6 +123,15 @@
reg = <0xeb000000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
+
+ dma-requests = <32>;
+ dma-channels = <8>;
+ dma-masters = <2>;
+ #dma-cells = <3>;
+ chan_allocation_order = <1>;
+ chan_priority = <1>;
+ block_size = <0xfff>;
+ data_width = <3 3 0 0>;
};
fsmc: flash@b0000000 {
@@ -261,6 +281,9 @@
#size-cells = <0>;
interrupts = <0 31 0x4>;
status = "disabled";
+ dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
+ <&dwdma0 0x0280 0 0 0>; /* 0x5 << 7 */
+ dma-names = "tx", "rx";
};
rtc@e0580000 {
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 1ea9590..047f2a4 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -20,7 +20,7 @@
CONFIG_SOC_AT91SAM9G45=y
CONFIG_SOC_AT91SAM9X5=y
CONFIG_SOC_AT91SAM9N12=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=128
CONFIG_AEABI=y
diff --git a/arch/arm/configs/at91sam9260_defconfig b/arch/arm/configs/at91sam9260_defconfig
index 0ea5d2c..05618eb 100644
--- a/arch/arm/configs/at91sam9260_defconfig
+++ b/arch/arm/configs/at91sam9260_defconfig
@@ -22,7 +22,7 @@
CONFIG_MACH_CPU9260=y
CONFIG_MACH_FLEXIBITY=y
CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 3b18810..892e828 100644
--- a/arch/arm/configs/at91sam9g20_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -22,7 +22,7 @@
CONFIG_MACH_GSIA18S=y
CONFIG_MACH_USB_A9G20=y
CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
index 606d48f..5f551b7 100644
--- a/arch/arm/configs/at91sam9g45_defconfig
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -18,7 +18,7 @@
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G45=y
CONFIG_MACH_AT91SAM9M10G45EK=y
-CONFIG_MACH_AT91SAM_DT=y
+CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AEABI=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e31d442..3bf0c54 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -10,6 +10,10 @@
# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
CONFIG_ARCH_ZYNQ=y
CONFIG_ARM_ERRATA_754322=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR13XX=y
+CONFIG_MACH_SPEAR1310=y
+CONFIG_MACH_SPEAR1340=y
CONFIG_SMP=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_AEABI=y
@@ -23,6 +27,7 @@
CONFIG_ATA=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
+CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_SMSC911X=y
@@ -31,6 +36,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
+CONFIG_KEYBOARD_SPEAR=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
@@ -40,6 +46,7 @@
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
+CONFIG_GPIO_PL061=y
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -50,6 +57,7 @@
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_HIGHBANK_MC=y
@@ -58,3 +66,4 @@
CONFIG_RTC_DRV_PL031=y
CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y
+CONFIG_DW_DMAC=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index bd07864..33903ca 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -93,6 +93,7 @@
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_LIS3_I2C=m
+CONFIG_BMP085_I2C=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
new file mode 100644
index 0000000..4d0dc3c
--- /dev/null
+++ b/arch/arm/configs/sama5_defconfig
@@ -0,0 +1,181 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_SAM_V7=y
+CONFIG_SOC_SAMA5D3=y
+CONFIG_MACH_SAMA5_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_CAN=y
+CONFIG_CAN_AT91=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_SSC=y
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_GPIO=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_SSB=m
+CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_HID_GENERIC is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_DMADEVICES=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_AT91_ADC=y
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_DEV_ATMEL_AES=y
+CONFIG_CRYPTO_DEV_ATMEL_TDES=y
+CONFIG_CRYPTO_DEV_ATMEL_SHA=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=m
diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig
index 865980c..7ff23a0 100644
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -6,7 +6,9 @@
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR3XX=y
CONFIG_MACH_SPEAR300=y
CONFIG_MACH_SPEAR310=y
CONFIG_MACH_SPEAR320=y
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index a2a1265..7822980 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -6,6 +6,7 @@
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_PLAT_SPEAR=y
CONFIG_ARCH_SPEAR6XX=y
CONFIG_BINFMT_MISC=y
diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h
index 720799f..dff714d 100644
--- a/arch/arm/include/asm/delay.h
+++ b/arch/arm/include/asm/delay.h
@@ -24,7 +24,7 @@
void (*delay)(unsigned long);
void (*const_udelay)(unsigned long);
void (*udelay)(unsigned long);
- bool const_clock;
+ unsigned long ticks_per_jiffy;
} arm_delay_ops;
#define __delay(n) arm_delay_ops.delay(n)
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index 8c5e828..91b99ab 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -41,6 +41,13 @@
#endif
#endif
+/*
+ * Needed to be able to broadcast the TLB invalidation for kmap.
+ */
+#ifdef CONFIG_ARM_ERRATA_798181
+#undef ARCH_NEEDS_KMAP_HIGH_GET
+#endif
+
#ifdef ARCH_NEEDS_KMAP_HIGH_GET
extern void *kmap_high_get(struct page *page);
#else
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 863a661..a7b85e0 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -27,6 +27,8 @@
void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; })
+DECLARE_PER_CPU(atomic64_t, active_asids);
+
#else /* !CONFIG_CPU_HAS_ASID */
#ifdef CONFIG_MMU
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index 4db8c88..9e9c041 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -450,6 +450,21 @@
isb();
}
+#ifdef CONFIG_ARM_ERRATA_798181
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+ /*
+ * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
+ */
+ asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+ dsb();
+}
+#else
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+}
+#endif
+
/*
* flush_pmd_entry
*
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 3248cde..fefd7f9 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -276,7 +276,13 @@
*/
.macro mcount_enter
+/*
+ * This pad compensates for the push {lr} at the call site. Note that we are
+ * unable to unwind through a function which does not otherwise save its lr.
+ */
+ UNWIND(.pad #4)
stmdb sp!, {r0-r3, lr}
+ UNWIND(.save {r0-r3, lr})
.endm
.macro mcount_get_lr reg
@@ -289,6 +295,7 @@
.endm
ENTRY(__gnu_mcount_nc)
+UNWIND(.fnstart)
#ifdef CONFIG_DYNAMIC_FTRACE
mov ip, lr
ldmia sp!, {lr}
@@ -296,17 +303,22 @@
#else
__mcount
#endif
+UNWIND(.fnend)
ENDPROC(__gnu_mcount_nc)
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(ftrace_caller)
+UNWIND(.fnstart)
__ftrace_caller
+UNWIND(.fnend)
ENDPROC(ftrace_caller)
#endif
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
ENTRY(ftrace_graph_caller)
+UNWIND(.fnstart)
__ftrace_graph_caller
+UNWIND(.fnend)
ENDPROC(ftrace_graph_caller)
#endif
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index e0eb9a1..8bac553 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -267,7 +267,7 @@
addne r6, r6, #1 << SECTION_SHIFT
strne r6, [r3]
-#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
+#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
sub r4, r4, #4 @ Fixup page table pointer
@ for 64-bit descriptors
#endif
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 96093b7..5dc1aa6 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -966,7 +966,7 @@
}
if (err) {
- pr_warning("CPU %d debug is powered down!\n", cpu);
+ pr_warn_once("CPU %d debug is powered down!\n", cpu);
cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
return;
}
@@ -987,7 +987,7 @@
isb();
if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
- pr_warning("CPU %d failed to disable vector catch\n", cpu);
+ pr_warn_once("CPU %d failed to disable vector catch\n", cpu);
return;
}
@@ -1007,7 +1007,7 @@
}
if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
- pr_warning("CPU %d failed to clear debug register pairs\n", cpu);
+ pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu);
return;
}
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 3f6cbb2..d343a6c 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -353,6 +353,23 @@
printk("%s", buf);
}
+static void __init cpuid_init_hwcaps(void)
+{
+ unsigned int divide_instrs;
+
+ if (cpu_architecture() < CPU_ARCH_ARMv7)
+ return;
+
+ divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24;
+
+ switch (divide_instrs) {
+ case 2:
+ elf_hwcap |= HWCAP_IDIVA;
+ case 1:
+ elf_hwcap |= HWCAP_IDIVT;
+ }
+}
+
static void __init feat_v6_fixup(void)
{
int id = read_cpuid_id();
@@ -483,8 +500,11 @@
snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
list->elf_name, ENDIANNESS);
elf_hwcap = list->elf_hwcap;
+
+ cpuid_init_hwcaps();
+
#ifndef CONFIG_ARM_THUMB
- elf_hwcap &= ~HWCAP_THUMB;
+ elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
#endif
feat_v6_fixup();
@@ -524,7 +544,7 @@
size -= start & ~PAGE_MASK;
bank->start = PAGE_ALIGN(start);
-#ifndef CONFIG_LPAE
+#ifndef CONFIG_ARM_LPAE
if (bank->start + size < bank->start) {
printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
"32-bit physical address space\n", (long long)start);
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 79078ed..1f2cccc 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -673,9 +673,6 @@
if (freq->flags & CPUFREQ_CONST_LOOPS)
return NOTIFY_OK;
- if (arm_delay_ops.const_clock)
- return NOTIFY_OK;
-
if (!per_cpu(l_p_j_ref, cpu)) {
per_cpu(l_p_j_ref, cpu) =
per_cpu(cpu_data, cpu).loops_per_jiffy;
diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
index bd03005..e82e1d2 100644
--- a/arch/arm/kernel/smp_tlb.c
+++ b/arch/arm/kernel/smp_tlb.c
@@ -12,6 +12,7 @@
#include <asm/smp_plat.h>
#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
/**********************************************************************/
@@ -69,12 +70,72 @@
local_flush_bp_all();
}
+#ifdef CONFIG_ARM_ERRATA_798181
+static int erratum_a15_798181(void)
+{
+ unsigned int midr = read_cpuid_id();
+
+ /* Cortex-A15 r0p0..r3p2 affected */
+ if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+ return 0;
+ return 1;
+}
+#else
+static int erratum_a15_798181(void)
+{
+ return 0;
+}
+#endif
+
+static void ipi_flush_tlb_a15_erratum(void *arg)
+{
+ dmb();
+}
+
+static void broadcast_tlb_a15_erratum(void)
+{
+ if (!erratum_a15_798181())
+ return;
+
+ dummy_flush_tlb_a15_erratum();
+ smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum,
+ NULL, 1);
+}
+
+static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
+{
+ int cpu;
+ cpumask_t mask = { CPU_BITS_NONE };
+
+ if (!erratum_a15_798181())
+ return;
+
+ dummy_flush_tlb_a15_erratum();
+ for_each_online_cpu(cpu) {
+ if (cpu == smp_processor_id())
+ continue;
+ /*
+ * We only need to send an IPI if the other CPUs are running
+ * the same ASID as the one being invalidated. There is no
+ * need for locking around the active_asids check since the
+ * switch_mm() function has at least one dmb() (as required by
+ * this workaround) in case a context switch happens on
+ * another CPU after the condition below.
+ */
+ if (atomic64_read(&mm->context.id) ==
+ atomic64_read(&per_cpu(active_asids, cpu)))
+ cpumask_set_cpu(cpu, &mask);
+ }
+ smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
+}
+
void flush_tlb_all(void)
{
if (tlb_ops_need_broadcast())
on_each_cpu(ipi_flush_tlb_all, NULL, 1);
else
local_flush_tlb_all();
+ broadcast_tlb_a15_erratum();
}
void flush_tlb_mm(struct mm_struct *mm)
@@ -83,6 +144,7 @@
on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1);
else
local_flush_tlb_mm(mm);
+ broadcast_tlb_mm_a15_erratum(mm);
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
@@ -95,6 +157,7 @@
&ta, 1);
} else
local_flush_tlb_page(vma, uaddr);
+ broadcast_tlb_mm_a15_erratum(vma->vm_mm);
}
void flush_tlb_kernel_page(unsigned long kaddr)
@@ -105,6 +168,7 @@
on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
} else
local_flush_tlb_kernel_page(kaddr);
+ broadcast_tlb_a15_erratum();
}
void flush_tlb_range(struct vm_area_struct *vma,
@@ -119,6 +183,7 @@
&ta, 1);
} else
local_flush_tlb_range(vma, start, end);
+ broadcast_tlb_mm_a15_erratum(vma->vm_mm);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@@ -130,6 +195,7 @@
on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
} else
local_flush_tlb_kernel_range(start, end);
+ broadcast_tlb_a15_erratum();
}
void flush_bp_all(void)
diff --git a/arch/arm/kvm/vgic.c b/arch/arm/kvm/vgic.c
index c9a1731..0e4cfe1 100644
--- a/arch/arm/kvm/vgic.c
+++ b/arch/arm/kvm/vgic.c
@@ -883,8 +883,7 @@
lr, irq, vgic_cpu->vgic_lr[lr]);
BUG_ON(!test_bit(lr, vgic_cpu->lr_used));
vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT;
-
- goto out;
+ return true;
}
/* Try to use another LR for this interrupt */
@@ -898,7 +897,6 @@
vgic_cpu->vgic_irq_lr_map[irq] = lr;
set_bit(lr, vgic_cpu->lr_used);
-out:
if (!vgic_irq_is_edge(vcpu, irq))
vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI;
@@ -1018,21 +1016,6 @@
kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr);
- /*
- * We do not need to take the distributor lock here, since the only
- * action we perform is clearing the irq_active_bit for an EOIed
- * level interrupt. There is a potential race with
- * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we
- * check if the interrupt is already active. Two possibilities:
- *
- * - The queuing is occurring on the same vcpu: cannot happen,
- * as we're already in the context of this vcpu, and
- * executing the handler
- * - The interrupt has been migrated to another vcpu, and we
- * ignore this interrupt for this run. Big deal. It is still
- * pending though, and will get considered when this vcpu
- * exits.
- */
if (vgic_cpu->vgic_misr & GICH_MISR_EOI) {
/*
* Some level interrupts have been EOIed. Clear their
@@ -1054,6 +1037,13 @@
} else {
vgic_cpu_irq_clear(vcpu, irq);
}
+
+ /*
+ * Despite being EOIed, the LR may not have
+ * been marked as empty.
+ */
+ set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr);
+ vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT;
}
}
@@ -1064,9 +1054,8 @@
}
/*
- * Sync back the VGIC state after a guest run. We do not really touch
- * the distributor here (the irq_pending_on_cpu bit is safe to set),
- * so there is no need for taking its lock.
+ * Sync back the VGIC state after a guest run. The distributor lock is
+ * needed so we don't get preempted in the middle of the state processing.
*/
static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
{
@@ -1112,10 +1101,14 @@
void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
{
+ struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+
if (!irqchip_in_kernel(vcpu->kvm))
return;
+ spin_lock(&dist->lock);
__kvm_vgic_sync_hwstate(vcpu);
+ spin_unlock(&dist->lock);
}
int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index 6b93f6a..64dbfa5 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -58,7 +58,7 @@
static void __timer_const_udelay(unsigned long xloops)
{
unsigned long long loops = xloops;
- loops *= loops_per_jiffy;
+ loops *= arm_delay_ops.ticks_per_jiffy;
__timer_delay(loops >> UDELAY_SHIFT);
}
@@ -73,11 +73,13 @@
pr_info("Switching to timer-based delay loop\n");
delay_timer = timer;
lpj_fine = timer->freq / HZ;
- loops_per_jiffy = lpj_fine;
+
+ /* cpufreq may scale loops_per_jiffy, so keep a private copy */
+ arm_delay_ops.ticks_per_jiffy = lpj_fine;
arm_delay_ops.delay = __timer_delay;
arm_delay_ops.const_udelay = __timer_const_udelay;
arm_delay_ops.udelay = __timer_udelay;
- arm_delay_ops.const_clock = true;
+
delay_calibrated = true;
} else {
pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 6071f4c..0280238 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,14 +1,15 @@
if ARCH_AT91
-config HAVE_AT91_DATAFLASH_CARD
- bool
-
config HAVE_AT91_DBGU0
bool
config HAVE_AT91_DBGU1
bool
+config AT91_PMC_UNIT
+ bool
+ default !ARCH_AT91X40
+
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
@@ -17,17 +18,59 @@
bool
default !ARCH_AT91X40
+config AT91_SAM9_TIME
+ bool
+
config SOC_AT91SAM9
bool
+ select AT91_SAM9_TIME
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
+config SOC_SAMA5
+ bool
+ select AT91_SAM9_TIME
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+
menu "Atmel AT91 System-on-Chip"
+choice
+
+ prompt "Core type"
+
+config SOC_SAM_V4_V5
+ bool "ARM7/ARM9"
+ help
+ Select this if you are using one of Atmel's AT91SAM9, AT91RM9200
+ or AT91X40 SoC.
+
+config SOC_SAM_V7
+ bool "Cortex A5"
+ help
+ Select this if you are using one of Atmel's SAMA5D3 SoC.
+
+endchoice
+
comment "Atmel AT91 Processor"
+if SOC_SAM_V7
+config SOC_SAMA5D3
+ bool "SAMA5D3 family"
+ depends on SOC_SAM_V7
+ select SOC_SAMA5
+ select HAVE_FB_ATMEL
+ select HAVE_AT91_DBGU1
+ help
+ Select this if you are using one of Atmel's SAMA5D3 family SoC.
+ This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35.
+endif
+
+if SOC_SAM_V4_V5
config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
@@ -93,394 +136,10 @@
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
-choice
- prompt "Atmel AT91 Processor Devices for non DT boards"
-
-config ARCH_AT91_NONE
- bool "None"
-
-config ARCH_AT91RM9200
- bool "AT91RM9200"
- select SOC_AT91RM9200
-
-config ARCH_AT91SAM9260
- bool "AT91SAM9260 or AT91SAM9XE"
- select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9261
- bool "AT91SAM9261"
- select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9G10
- bool "AT91SAM9G10"
- select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9263
- bool "AT91SAM9263"
- select SOC_AT91SAM9263
-
-config ARCH_AT91SAM9RL
- bool "AT91SAM9RL"
- select SOC_AT91SAM9RL
-
-config ARCH_AT91SAM9G20
- bool "AT91SAM9G20"
- select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9G45
- bool "AT91SAM9G45"
- select SOC_AT91SAM9G45
-
-config ARCH_AT91X40
- bool "AT91x40"
- depends on !MMU
- select ARCH_USES_GETTIMEOFFSET
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
-endchoice
-
-config AT91_PMC_UNIT
- bool
- default !ARCH_AT91X40
-
# ----------------------------------------------------------
-if ARCH_AT91RM9200
-
-comment "AT91RM9200 Board Type"
-
-config MACH_ONEARM
- bool "Ajeco 1ARM Single Board Computer"
- help
- Select this if you are using Ajeco's 1ARM Single Board Computer.
- <http://www.ajeco.fi/>
-
-config ARCH_AT91RM9200DK
- bool "Atmel AT91RM9200-DK Development board"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91RM9200-DK Development board.
- (Discontinued)
-
-config MACH_AT91RM9200EK
- bool "Atmel AT91RM9200-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-
-config MACH_CSB337
- bool "Cogent CSB337"
- help
- Select this if you are using Cogent's CSB337 board.
- <http://www.cogcomp.com/csb_csb337.htm>
-
-config MACH_CSB637
- bool "Cogent CSB637"
- help
- Select this if you are using Cogent's CSB637 board.
- <http://www.cogcomp.com/csb_csb637.htm>
-
-config MACH_CARMEVA
- bool "Conitec ARM&EVA"
- help
- Select this if you are using Conitec's AT91RM9200-MCU-Module.
- <http://www.conitec.net/english/linuxboard.php>
-
-config MACH_ATEB9200
- bool "Embest ATEB9200"
- help
- Select this if you are using Embest's ATEB9200 board.
- <http://www.embedinfo.com/english/product/ATEB9200.asp>
-
-config MACH_KB9200
- bool "KwikByte KB920x"
- help
- Select this if you are using KwikByte's KB920x board.
- <http://www.kwikbyte.com/KB9202.html>
-
-config MACH_PICOTUX2XX
- bool "picotux 200"
- help
- Select this if you are using a picotux 200.
- <http://www.picotux.com/>
-
-config MACH_KAFA
- bool "Sperry-Sun KAFA board"
- help
- Select this if you are using Sperry-Sun's KAFA board.
-
-config MACH_ECBAT91
- bool "emQbit ECB_AT91 SBC"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using emQbit's ECB_AT91 board.
- <http://wiki.emqbit.com/free-ecb-at91>
-
-config MACH_YL9200
- bool "ucDragon YL-9200"
- help
- Select this if you are using the ucDragon YL-9200 board.
-
-config MACH_CPUAT91
- bool "Eukrea CPUAT91"
- help
- Select this if you are using the Eukrea Electromatique's
- CPUAT91 board <http://www.eukrea.com/>.
-
-config MACH_ECO920
- bool "eco920"
- help
- Select this if you are using the eco920 board
-
-config MACH_RSI_EWS
- bool "RSI Embedded Webserver"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using RSIs EWS board.
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Variants"
-
-comment "AT91SAM9260 / AT91SAM9XE Board Type"
-
-config MACH_AT91SAM9260EK
- bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-config MACH_CAM60
- bool "KwikByte KB9260 (CAM60) board"
- help
- Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
- <http://www.kwikbyte.com/KB9260.html>
-
-config MACH_SAM9_L9260
- bool "Olimex SAM9-L9260 board"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
- <http://www.olimex.com/dev/sam9-L9260.html>
-
-config MACH_AFEB9260
- bool "Custom afeb9260 board v1"
- help
- Select this if you are using custom afeb9260 board based on
- open hardware design. Select this for revision 1 of the board.
- <svn://194.85.238.22/home/users/george/svn/arm9eb>
- <http://groups.google.com/group/arm9fpga-evolution-board>
-
-config MACH_USB_A9260
- bool "CALAO USB-A9260"
- help
- Select this if you are using a Calao Systems USB-A9260.
- <http://www.calao-systems.com>
-
-config MACH_QIL_A9260
- bool "CALAO QIL-A9260 board"
- help
- Select this if you are using a Calao Systems QIL-A9260 Board.
- <http://www.calao-systems.com>
-
-config MACH_CPU9260
- bool "Eukrea CPU9260 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9260 Board <http://www.eukrea.com/>
-
-config MACH_FLEXIBITY
- bool "Flexibity Connect board"
- help
- Select this if you are using Flexibity Connect board
- <http://www.flexibity.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
- bool "Atmel AT91SAM9261-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G10
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
- bool "Atmel AT91SAM9G10-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
- bool "Atmel AT91SAM9263-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-config MACH_USB_A9263
- bool "CALAO USB-A9263"
- help
- Select this if you are using a Calao Systems USB-A9263.
- <http://www.calao-systems.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
- bool "Atmel AT91SAM9RL-EK Evaluation Kit"
- help
- Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G20
-
-comment "AT91SAM9G20 Board Type"
-
-config MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
- that embeds only one SD/MMC slot.
-
-config MACH_AT91SAM9G20EK_2MMC
- depends on MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
- help
- Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
- with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
- onwards.
- <http://www.atmel.com/tools/SAM9G20-EK.aspx>
-
-config MACH_CPU9G20
- bool "Eukrea CPU9G20 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9G20 Board <http://www.eukrea.com/>
-
-config MACH_ACMENETUSFOXG20
- bool "Acme Systems srl FOX Board G20"
- help
- Select this if you are using Acme Systems
- FOX Board G20 <http://www.acmesystems.it>
-
-config MACH_PORTUXG20
- bool "taskit PortuxG20"
- help
- Select this if you are using taskit's PortuxG20.
- <http://www.taskit.de/en/>
-
-config MACH_STAMP9G20
- bool "taskit Stamp9G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on its
- evaluation board.
- <http://www.taskit.de/en/>
-
-config MACH_PCONTROL_G20
- bool "PControl G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on this
- carrier board, beeing the decentralized unit of a building automation
- system; featuring nvram, eth-switch, iso-rs485, display, io
-
-config MACH_GSIA18S
- bool "GS_IA18_S board"
- help
- This enables support for the GS_IA18_S board
- produced by GeoSIG Ltd company. This is an internet accelerograph.
- <http://www.geosig.com>
-
-config MACH_USB_A9G20
- bool "CALAO USB-A9G20"
- depends on ARCH_AT91SAM9G20
- help
- Select this if you are using a Calao Systems USB-A9G20.
- <http://www.calao-systems.com>
-
-endif
-
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
-comment "AT91SAM9260/AT91SAM9G20 boards"
-
-config MACH_SNAPPER_9260
- bool "Bluewater Systems Snapper 9260/9G20 module"
- help
- Select this if you are using the Bluewater Systems Snapper 9260 or
- Snapper 9G20 modules.
- <http://www.bluewatersys.com/>
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G45
-
-comment "AT91SAM9G45 Board Type"
-
-config MACH_AT91SAM9M10G45EK
- bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
- help
- Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
- Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
- families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
- <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91X40
-
-comment "AT91X40 Board Type"
-
-config MACH_AT91EB01
- bool "Atmel AT91EB01 Evaluation Kit"
- help
- Select this if you are using Atmel's AT91EB01 Evaluation Kit.
- It is also a popular target for simulators such as GDB's
- ARM simulator (commonly known as the ARMulator) and the
- Skyeye simulator.
-
-endif
-
-# ----------------------------------------------------------
+source arch/arm/mach-at91/Kconfig.non_dt
+endif # SOC_SAM_V4_V5
comment "Generic Board Type"
@@ -492,7 +151,7 @@
Select this if you want to experiment device-tree with
an Atmel RM9200 Evaluation Kit.
-config MACH_AT91SAM_DT
+config MACH_AT91SAM9_DT
bool "Atmel AT91SAM Evaluation Kits with device-tree support"
depends on SOC_AT91SAM9
select USE_OF
@@ -500,15 +159,13 @@
Select this if you want to experiment device-tree with
an Atmel Evaluation Kit.
-# ----------------------------------------------------------
-
-comment "AT91 Board Options"
-
-config MTD_AT91_DATAFLASH_CARD
- bool "Enable DataFlash Card support"
- depends on HAVE_AT91_DATAFLASH_CARD
+config MACH_SAMA5_DT
+ bool "Atmel SAMA5 Evaluation Kits with device-tree support"
+ depends on SOC_SAMA5
+ select USE_OF
help
- Enable support for the DataFlash card.
+ Select this if you want to experiment device-tree with
+ an Atmel Evaluation Kit.
# ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
new file mode 100644
index 0000000..6c24985
--- /dev/null
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -0,0 +1,399 @@
+menu "Atmel Non-DT world"
+
+config HAVE_AT91_DATAFLASH_CARD
+ bool
+
+choice
+ prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+ bool "None"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
+ select SOC_AT91RM9200
+
+config ARCH_AT91SAM9260
+ bool "AT91SAM9260 or AT91SAM9XE"
+ select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+ select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9G10
+ bool "AT91SAM9G10"
+ select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9263
+ bool "AT91SAM9263"
+ select SOC_AT91SAM9263
+
+config ARCH_AT91SAM9RL
+ bool "AT91SAM9RL"
+ select SOC_AT91SAM9RL
+
+config ARCH_AT91SAM9G20
+ bool "AT91SAM9G20"
+ select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9G45
+ bool "AT91SAM9G45"
+ select SOC_AT91SAM9G45
+
+config ARCH_AT91X40
+ bool "AT91x40"
+ depends on !MMU
+ select ARCH_USES_GETTIMEOFFSET
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+
+endchoice
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
+
+comment "AT91RM9200 Board Type"
+
+config MACH_ONEARM
+ bool "Ajeco 1ARM Single Board Computer"
+ help
+ Select this if you are using Ajeco's 1ARM Single Board Computer.
+ <http://www.ajeco.fi/>
+
+config ARCH_AT91RM9200DK
+ bool "Atmel AT91RM9200-DK Development board"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91RM9200-DK Development board.
+ (Discontinued)
+
+config MACH_AT91RM9200EK
+ bool "Atmel AT91RM9200-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
+
+config MACH_CSB337
+ bool "Cogent CSB337"
+ help
+ Select this if you are using Cogent's CSB337 board.
+ <http://www.cogcomp.com/csb_csb337.htm>
+
+config MACH_CSB637
+ bool "Cogent CSB637"
+ help
+ Select this if you are using Cogent's CSB637 board.
+ <http://www.cogcomp.com/csb_csb637.htm>
+
+config MACH_CARMEVA
+ bool "Conitec ARM&EVA"
+ help
+ Select this if you are using Conitec's AT91RM9200-MCU-Module.
+ <http://www.conitec.net/english/linuxboard.php>
+
+config MACH_ATEB9200
+ bool "Embest ATEB9200"
+ help
+ Select this if you are using Embest's ATEB9200 board.
+ <http://www.embedinfo.com/english/product/ATEB9200.asp>
+
+config MACH_KB9200
+ bool "KwikByte KB920x"
+ help
+ Select this if you are using KwikByte's KB920x board.
+ <http://www.kwikbyte.com/KB9202.html>
+
+config MACH_PICOTUX2XX
+ bool "picotux 200"
+ help
+ Select this if you are using a picotux 200.
+ <http://www.picotux.com/>
+
+config MACH_KAFA
+ bool "Sperry-Sun KAFA board"
+ help
+ Select this if you are using Sperry-Sun's KAFA board.
+
+config MACH_ECBAT91
+ bool "emQbit ECB_AT91 SBC"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using emQbit's ECB_AT91 board.
+ <http://wiki.emqbit.com/free-ecb-at91>
+
+config MACH_YL9200
+ bool "ucDragon YL-9200"
+ help
+ Select this if you are using the ucDragon YL-9200 board.
+
+config MACH_CPUAT91
+ bool "Eukrea CPUAT91"
+ help
+ Select this if you are using the Eukrea Electromatique's
+ CPUAT91 board <http://www.eukrea.com/>.
+
+config MACH_ECO920
+ bool "eco920"
+ help
+ Select this if you are using the eco920 board
+
+config MACH_RSI_EWS
+ bool "RSI Embedded Webserver"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using RSIs EWS board.
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Variants"
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
+
+config MACH_AT91SAM9260EK
+ bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
+config MACH_CAM60
+ bool "KwikByte KB9260 (CAM60) board"
+ help
+ Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
+ <http://www.kwikbyte.com/KB9260.html>
+
+config MACH_SAM9_L9260
+ bool "Olimex SAM9-L9260 board"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
+ <http://www.olimex.com/dev/sam9-L9260.html>
+
+config MACH_AFEB9260
+ bool "Custom afeb9260 board v1"
+ help
+ Select this if you are using custom afeb9260 board based on
+ open hardware design. Select this for revision 1 of the board.
+ <svn://194.85.238.22/home/users/george/svn/arm9eb>
+ <http://groups.google.com/group/arm9fpga-evolution-board>
+
+config MACH_USB_A9260
+ bool "CALAO USB-A9260"
+ help
+ Select this if you are using a Calao Systems USB-A9260.
+ <http://www.calao-systems.com>
+
+config MACH_QIL_A9260
+ bool "CALAO QIL-A9260 board"
+ help
+ Select this if you are using a Calao Systems QIL-A9260 Board.
+ <http://www.calao-systems.com>
+
+config MACH_CPU9260
+ bool "Eukrea CPU9260 board"
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9260 Board <http://www.eukrea.com/>
+
+config MACH_FLEXIBITY
+ bool "Flexibity Connect board"
+ help
+ Select this if you are using Flexibity Connect board
+ <http://www.flexibity.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+ bool "Atmel AT91SAM9261-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+ bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+ bool "Atmel AT91SAM9263-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+config MACH_USB_A9263
+ bool "CALAO USB-A9263"
+ help
+ Select this if you are using a Calao Systems USB-A9263.
+ <http://www.calao-systems.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+ bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+ help
+ Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G20
+
+comment "AT91SAM9G20 Board Type"
+
+config MACH_AT91SAM9G20EK
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit"
+ select HAVE_AT91_DATAFLASH_CARD
+ help
+ Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+ that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+ depends on MACH_AT91SAM9G20EK
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+ help
+ Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+ with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+ onwards.
+ <http://www.atmel.com/tools/SAM9G20-EK.aspx>
+
+config MACH_CPU9G20
+ bool "Eukrea CPU9G20 board"
+ help
+ Select this if you are using a Eukrea Electromatique's
+ CPU9G20 Board <http://www.eukrea.com/>
+
+config MACH_ACMENETUSFOXG20
+ bool "Acme Systems srl FOX Board G20"
+ help
+ Select this if you are using Acme Systems
+ FOX Board G20 <http://www.acmesystems.it>
+
+config MACH_PORTUXG20
+ bool "taskit PortuxG20"
+ help
+ Select this if you are using taskit's PortuxG20.
+ <http://www.taskit.de/en/>
+
+config MACH_STAMP9G20
+ bool "taskit Stamp9G20 CPU module"
+ help
+ Select this if you are using taskit's Stamp9G20 CPU module on its
+ evaluation board.
+ <http://www.taskit.de/en/>
+
+config MACH_PCONTROL_G20
+ bool "PControl G20 CPU module"
+ help
+ Select this if you are using taskit's Stamp9G20 CPU module on this
+ carrier board, beeing the decentralized unit of a building automation
+ system; featuring nvram, eth-switch, iso-rs485, display, io
+
+config MACH_GSIA18S
+ bool "GS_IA18_S board"
+ help
+ This enables support for the GS_IA18_S board
+ produced by GeoSIG Ltd company. This is an internet accelerograph.
+ <http://www.geosig.com>
+
+config MACH_USB_A9G20
+ bool "CALAO USB-A9G20"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using a Calao Systems USB-A9G20.
+ <http://www.calao-systems.com>
+
+endif
+
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+ bool "Bluewater Systems Snapper 9260/9G20 module"
+ help
+ Select this if you are using the Bluewater Systems Snapper 9260 or
+ Snapper 9G20 modules.
+ <http://www.bluewatersys.com/>
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9M10G45EK
+ bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
+ help
+ Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+ Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+ families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+ <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91X40
+
+comment "AT91X40 Board Type"
+
+config MACH_AT91EB01
+ bool "Atmel AT91EB01 Evaluation Kit"
+ help
+ Select this if you are using Atmel's AT91EB01 Evaluation Kit.
+ It is also a popular target for simulators such as GDB's
+ ARM simulator (commonly known as the ARMulator) and the
+ Skyeye simulator.
+
+endif
+
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+ bool "Enable DataFlash Card support"
+ depends on HAVE_AT91_DATAFLASH_CARD
+ help
+ Enable support for the DataFlash card.
+
+endmenu
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 39218ca..788562d 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -10,7 +10,8 @@
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
-obj-$(CONFIG_SOC_AT91SAM9) += at91sam926x_time.o sam9_smc.o
+obj-$(CONFIG_AT91_SAM9_TIME) += at91sam926x_time.o
+obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
# CPU-specific support
obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o
@@ -21,6 +22,7 @@
obj-$(CONFIG_SOC_AT91SAM9N12) += at91sam9n12.o
obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o
obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o
+obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
@@ -87,8 +89,11 @@
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
# AT91SAM board with device-tree
-obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o
-obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
+obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
+obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
+
+# SAMA5 board with device-tree
+obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 9706c00..ccce759 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -384,7 +384,7 @@
0 /* Advanced Interrupt Controller (IRQ6) */
};
-AT91_SOC_START(rm9200)
+AT91_SOC_START(at91rm9200)
.map_io = at91rm9200_map_io,
.default_irq_priority = at91rm9200_default_irq_priority,
.ioremap_registers = at91rm9200_ioremap_registers,
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index b67cd53..1833b4c 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -395,7 +395,7 @@
0, /* Advanced Interrupt Controller */
};
-AT91_SOC_START(sam9260)
+AT91_SOC_START(at91sam9260)
.map_io = at91sam9260_map_io,
.default_irq_priority = at91sam9260_default_irq_priority,
.ioremap_registers = at91sam9260_ioremap_registers,
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 0204f4c..25efb5a 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -339,7 +339,7 @@
0, /* Advanced Interrupt Controller */
};
-AT91_SOC_START(sam9261)
+AT91_SOC_START(at91sam9261)
.map_io = at91sam9261_map_io,
.default_irq_priority = at91sam9261_default_irq_priority,
.ioremap_registers = at91sam9261_ioremap_registers,
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 2282fd7..f44ffd2 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -375,7 +375,7 @@
0, /* Advanced Interrupt Controller (IRQ1) */
};
-AT91_SOC_START(sam9263)
+AT91_SOC_START(at91sam9263)
.map_io = at91sam9263_map_io,
.default_irq_priority = at91sam9263_default_irq_priority,
.ioremap_registers = at91sam9263_ioremap_registers,
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index c68960d..dc49c2c 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -420,7 +420,7 @@
0, /* Advanced Interrupt Controller (IRQ0) */
};
-AT91_SOC_START(sam9g45)
+AT91_SOC_START(at91sam9g45)
.map_io = at91sam9g45_map_io,
.default_irq_priority = at91sam9g45_default_irq_priority,
.ioremap_registers = at91sam9g45_ioremap_registers,
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 5dfc8fd..2c7a2f4 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -226,7 +226,7 @@
at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
}
-AT91_SOC_START(sam9n12)
+AT91_SOC_START(at91sam9n12)
.map_io = at91sam9n12_map_io,
.register_clocks = at91sam9n12_register_clocks,
.init = at91sam9n12_initialize,
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 3de3e04..f77fae5 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -341,7 +341,7 @@
0, /* Advanced Interrupt Controller */
};
-AT91_SOC_START(sam9rl)
+AT91_SOC_START(at91sam9rl)
.map_io = at91sam9rl_map_io,
.default_irq_priority = at91sam9rl_default_irq_priority,
.ioremap_registers = at91sam9rl_ioremap_registers,
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index 44a9a62..3a1a799 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -320,7 +320,7 @@
* Interrupt initialization
* -------------------------------------------------------------------- */
-AT91_SOC_START(sam9x5)
+AT91_SOC_START(at91sam9x5)
.map_io = at91sam9x5_map_io,
.register_clocks = at91sam9x5_register_clocks,
AT91_SOC_END
diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-dt-rm9200.c
similarity index 100%
rename from arch/arm/mach-at91/board-rm9200-dt.c
rename to arch/arm/mach-at91/board-dt-rm9200.c
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt-sam9.c
similarity index 100%
rename from arch/arm/mach-at91/board-dt.c
rename to arch/arm/mach-at91/board-dt-sam9.c
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
new file mode 100644
index 0000000..705305e
--- /dev/null
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -0,0 +1,86 @@
+/*
+ * Setup code for SAMA5 Evaluation Kits with Device Tree support
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/micrel_phy.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "at91_aic.h"
+#include "generic.h"
+
+
+static const struct of_device_id irq_of_match[] __initconst = {
+
+ { .compatible = "atmel,sama5d3-aic", .data = at91_aic5_of_init },
+ { /*sentinel*/ }
+};
+
+static void __init at91_dt_init_irq(void)
+{
+ of_irq_init(irq_of_match);
+}
+
+static int ksz9021rn_phy_fixup(struct phy_device *phy)
+{
+ int value;
+
+#define GMII_RCCPSR 260
+#define GMII_RRDPSR 261
+#define GMII_ERCR 11
+#define GMII_ERDWR 12
+
+ /* Set delay values */
+ value = GMII_RCCPSR | 0x8000;
+ phy_write(phy, GMII_ERCR, value);
+ value = 0xF2F4;
+ phy_write(phy, GMII_ERDWR, value);
+ value = GMII_RRDPSR | 0x8000;
+ phy_write(phy, GMII_ERCR, value);
+ value = 0x2222;
+ phy_write(phy, GMII_ERDWR, value);
+
+ return 0;
+}
+
+static void __init sama5_dt_device_init(void)
+{
+ if (of_machine_is_compatible("atmel,sama5d3xcm"))
+ phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+ ksz9021rn_phy_fixup);
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *sama5_dt_board_compat[] __initdata = {
+ "atmel,sama5",
+ NULL
+};
+
+DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
+ /* Maintainer: Atmel */
+ .init_time = at91sam926x_pit_init,
+ .map_io = at91_map_io,
+ .handle_irq = at91_aic5_handle_irq,
+ .init_early = at91_dt_initialize,
+ .init_irq = at91_dt_init_irq,
+ .init_machine = sama5_dt_device_init,
+ .dt_compat = sama5_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 3336150..da84188 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -54,7 +54,10 @@
*/
#define cpu_has_utmi() ( cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5())
+ || cpu_is_at91sam9x5() \
+ || cpu_is_sama5d3())
+
+#define cpu_has_1056M_plla() (cpu_is_sama5d3())
#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
|| cpu_is_at91sam9g45() \
@@ -75,7 +78,8 @@
|| cpu_is_at91sam9n12()))
#define cpu_has_upll() (cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5())
+ || cpu_is_at91sam9x5() \
+ || cpu_is_sama5d3())
/* USB host HS & FS */
#define cpu_has_uhp() (!cpu_is_at91sam9rl())
@@ -83,18 +87,22 @@
/* USB device FS only */
#define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5()))
+ || cpu_is_at91sam9x5() \
+ || cpu_is_sama5d3()))
#define cpu_has_plladiv2() (cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \
- || cpu_is_at91sam9n12())
+ || cpu_is_at91sam9n12() \
+ || cpu_is_sama5d3())
#define cpu_has_mdiv3() (cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \
- || cpu_is_at91sam9n12())
+ || cpu_is_at91sam9n12() \
+ || cpu_is_sama5d3())
#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \
- || cpu_is_at91sam9n12())
+ || cpu_is_at91sam9n12() \
+ || cpu_is_sama5d3())
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
@@ -210,10 +218,26 @@
static void pmc_periph_mode(struct clk *clk, int is_on)
{
- if (is_on)
- at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
- else
- at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
+ u32 regval = 0;
+
+ /*
+ * With sama5d3 devices, we are managing clock division so we have to
+ * use the Peripheral Control Register introduced from at91sam9x5
+ * devices.
+ */
+ if (cpu_is_sama5d3()) {
+ regval |= AT91_PMC_PCR_CMD; /* write command */
+ regval |= clk->pid & AT91_PMC_PCR_PID; /* peripheral selection */
+ regval |= AT91_PMC_PCR_DIV(clk->div);
+ if (is_on)
+ regval |= AT91_PMC_PCR_EN; /* enable clock */
+ at91_pmc_write(AT91_PMC_PCR, regval);
+ } else {
+ if (is_on)
+ at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
+ else
+ at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
+ }
}
static struct clk __init *at91_css_to_clk(unsigned long css)
@@ -443,14 +467,18 @@
static int at91_clk_show(struct seq_file *s, void *unused)
{
- u32 scsr, pcsr, uckr = 0, sr;
+ u32 scsr, pcsr, pcsr1 = 0, uckr = 0, sr;
struct clk *clk;
scsr = at91_pmc_read(AT91_PMC_SCSR);
pcsr = at91_pmc_read(AT91_PMC_PCSR);
+ if (cpu_is_sama5d3())
+ pcsr1 = at91_pmc_read(AT91_PMC_PCSR1);
sr = at91_pmc_read(AT91_PMC_SR);
seq_printf(s, "SCSR = %8x\n", scsr);
seq_printf(s, "PCSR = %8x\n", pcsr);
+ if (cpu_is_sama5d3())
+ seq_printf(s, "PCSR1 = %8x\n", pcsr1);
seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR));
seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR));
seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR));
@@ -470,20 +498,30 @@
list_for_each_entry(clk, &clocks, node) {
char *state;
- if (clk->mode == pmc_sys_mode)
+ if (clk->mode == pmc_sys_mode) {
state = (scsr & clk->pmc_mask) ? "on" : "off";
- else if (clk->mode == pmc_periph_mode)
- state = (pcsr & clk->pmc_mask) ? "on" : "off";
- else if (clk->mode == pmc_uckr_mode)
- state = (uckr & clk->pmc_mask) ? "on" : "off";
- else if (clk->pmc_mask)
- state = (sr & clk->pmc_mask) ? "on" : "off";
- else if (clk == &clk32k || clk == &main_clk)
- state = "on";
- else
- state = "";
+ } else if (clk->mode == pmc_periph_mode) {
+ if (cpu_is_sama5d3()) {
+ u32 pmc_mask = 1 << (clk->pid % 32);
- seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
+ if (clk->pid > 31)
+ state = (pcsr1 & pmc_mask) ? "on" : "off";
+ else
+ state = (pcsr & pmc_mask) ? "on" : "off";
+ } else {
+ state = (pcsr & clk->pmc_mask) ? "on" : "off";
+ }
+ } else if (clk->mode == pmc_uckr_mode) {
+ state = (uckr & clk->pmc_mask) ? "on" : "off";
+ } else if (clk->pmc_mask) {
+ state = (sr & clk->pmc_mask) ? "on" : "off";
+ } else if (clk == &clk32k || clk == &main_clk) {
+ state = "on";
+ } else {
+ state = "";
+ }
+
+ seq_printf(s, "%-10s users=%2d %-3s %9lu Hz %s\n",
clk->name, clk->users, state, clk_get_rate(clk),
clk->parent ? clk->parent->name : "");
}
@@ -530,6 +568,9 @@
if (clk_is_peripheral(clk)) {
if (!clk->parent)
clk->parent = &mck;
+ if (cpu_is_sama5d3())
+ clk->rate_hz = DIV_ROUND_UP(clk->parent->rate_hz,
+ 1 << clk->div);
clk->mode = pmc_periph_mode;
}
else if (clk_is_sys(clk)) {
@@ -555,7 +596,11 @@
unsigned mul, div;
div = reg & 0xff;
- mul = (reg >> 16) & 0x7ff;
+ if (cpu_is_sama5d3())
+ mul = AT91_PMC3_MUL_GET(reg);
+ else
+ mul = AT91_PMC_MUL_GET(reg);
+
if (div && mul) {
freq /= div;
freq *= mul + 1;
@@ -706,12 +751,15 @@
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR));
- if (cpu_has_300M_plla()) {
- if (plla.rate_hz > 300000000)
+ if (cpu_has_1056M_plla()) {
+ if (plla.rate_hz > 1056000000)
pll_overclock = true;
} else if (cpu_has_800M_plla()) {
if (plla.rate_hz > 800000000)
pll_overclock = true;
+ } else if (cpu_has_300M_plla()) {
+ if (plla.rate_hz > 300000000)
+ pll_overclock = true;
} else if (cpu_has_240M_plla()) {
if (plla.rate_hz > 240000000)
pll_overclock = true;
@@ -872,6 +920,7 @@
static int __init at91_clock_reset(void)
{
unsigned long pcdr = 0;
+ unsigned long pcdr1 = 0;
unsigned long scdr = 0;
struct clk *clk;
@@ -879,8 +928,17 @@
if (clk->users > 0)
continue;
- if (clk->mode == pmc_periph_mode)
- pcdr |= clk->pmc_mask;
+ if (clk->mode == pmc_periph_mode) {
+ if (cpu_is_sama5d3()) {
+ u32 pmc_mask = 1 << (clk->pid % 32);
+
+ if (clk->pid > 31)
+ pcdr1 |= pmc_mask;
+ else
+ pcdr |= pmc_mask;
+ } else
+ pcdr |= clk->pmc_mask;
+ }
if (clk->mode == pmc_sys_mode)
scdr |= clk->pmc_mask;
@@ -888,8 +946,9 @@
pr_debug("Clocks: disable unused %s\n", clk->name);
}
- at91_pmc_write(AT91_PMC_PCDR, pcdr);
at91_pmc_write(AT91_PMC_SCDR, scdr);
+ if (cpu_is_sama5d3())
+ at91_pmc_write(AT91_PMC_PCDR1, pcdr1);
return 0;
}
diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h
index c2e63e4..a98a39b 100644
--- a/arch/arm/mach-at91/clock.h
+++ b/arch/arm/mach-at91/clock.h
@@ -20,7 +20,9 @@
const char *name; /* unique clock name */
struct clk_lookup cl;
unsigned long rate_hz;
+ unsigned div; /* parent clock divider */
struct clk *parent;
+ unsigned pid; /* peripheral ID */
u32 pmc_mask;
void (*mode)(struct clk *, int);
unsigned id:3; /* PCK0..4, or 32k/main/a/b */
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index 0c63815..4c67946 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -38,6 +38,8 @@
at91rm9200_standby();
else if (cpu_is_at91sam9g45())
at91sam9g45_standby();
+ else if (cpu_is_at91sam9263())
+ at91sam9263_standby();
else
at91sam9_standby();
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index ea2c57a..31df1202 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -75,6 +75,9 @@
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
+#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff)
+#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */
+#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f)
#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
#define AT91_PMC_USBDIV_1 (0 << 28)
#define AT91_PMC_USBDIV_2 (1 << 28)
@@ -167,11 +170,18 @@
#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */
#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */
-#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9] */
+#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/
+#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */
+#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */
+
+#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */
#define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */
-#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command */
-#define AT91_PMC_PCR_DIV (0x3 << 16) /* Divisor Value */
-#define AT91_PMC_PCRDIV(n) (((n) << 16) & AT91_PMC_PCR_DIV)
+#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */
+#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */
+#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */
+#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */
+#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */
+#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */
#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */
#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index b6504c1..d3d7b99 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -36,6 +36,8 @@
#define ARCH_ID_AT91M40807 0x14080745
#define ARCH_ID_AT91R40008 0x44000840
+#define ARCH_ID_SAMA5D3 0x8A5C07C0
+
#define ARCH_EXID_AT91SAM9M11 0x00000001
#define ARCH_EXID_AT91SAM9M10 0x00000002
#define ARCH_EXID_AT91SAM9G46 0x00000003
@@ -47,6 +49,11 @@
#define ARCH_EXID_AT91SAM9G25 0x00000003
#define ARCH_EXID_AT91SAM9X25 0x00000004
+#define ARCH_EXID_SAMA5D31 0x00444300
+#define ARCH_EXID_SAMA5D33 0x00414300
+#define ARCH_EXID_SAMA5D34 0x00414301
+#define ARCH_EXID_SAMA5D35 0x00584300
+
#define ARCH_FAMILY_AT91X92 0x09200000
#define ARCH_FAMILY_AT91SAM9 0x01900000
#define ARCH_FAMILY_AT91SAM9XE 0x02900000
@@ -75,8 +82,11 @@
/* SAM9N12 */
AT91_SOC_SAM9N12,
+ /* SAMA5D3 */
+ AT91_SOC_SAMA5D3,
+
/* Unknown type */
- AT91_SOC_NONE
+ AT91_SOC_UNKNOWN,
};
enum at91_soc_subtype {
@@ -93,8 +103,15 @@
AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35,
AT91_SOC_SAM9G25, AT91_SOC_SAM9X25,
+ /* SAMA5D3 */
+ AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
+ AT91_SOC_SAMA5D35,
+
+ /* No subtype for this SoC */
+ AT91_SOC_SUBTYPE_NONE,
+
/* Unknown subtype */
- AT91_SOC_SUBTYPE_NONE
+ AT91_SOC_SUBTYPE_UNKNOWN,
};
struct at91_socinfo {
@@ -108,7 +125,7 @@
static inline int at91_soc_is_detected(void)
{
- return at91_soc_initdata.type != AT91_SOC_NONE;
+ return at91_soc_initdata.type != AT91_SOC_UNKNOWN;
}
#ifdef CONFIG_SOC_AT91RM9200
@@ -187,6 +204,12 @@
#define cpu_is_at91sam9n12() (0)
#endif
+#ifdef CONFIG_SOC_SAMA5D3
+#define cpu_is_sama5d3() (at91_soc_initdata.type == AT91_SOC_SAMA5D3)
+#else
+#define cpu_is_sama5d3() (0)
+#endif
+
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h
new file mode 100644
index 0000000..6dc81ee
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/sama5d3.h
@@ -0,0 +1,73 @@
+/*
+ * Chip-specific header file for the SAMA5D3 family
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Common definitions.
+ * Based on SAMA5D3 datasheet.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef SAMA5D3_H
+#define SAMA5D3_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define SAMA5D3_ID_DBGU 2 /* debug Unit (usually no special interrupt line) */
+#define AT91_ID_PIT 3 /* PIT */
+#define SAMA5D3_ID_WDT 4 /* Watchdog Timer Interrupt */
+#define SAMA5D3_ID_HSMC 5 /* Static Memory Controller */
+#define SAMA5D3_ID_PIOA 6 /* PIOA */
+#define SAMA5D3_ID_PIOB 7 /* PIOB */
+#define SAMA5D3_ID_PIOC 8 /* PIOC */
+#define SAMA5D3_ID_PIOD 9 /* PIOD */
+#define SAMA5D3_ID_PIOE 10 /* PIOE */
+#define SAMA5D3_ID_SMD 11 /* SMD Soft Modem */
+#define SAMA5D3_ID_USART0 12 /* USART0 */
+#define SAMA5D3_ID_USART1 13 /* USART1 */
+#define SAMA5D3_ID_USART2 14 /* USART2 */
+#define SAMA5D3_ID_USART3 15 /* USART3 */
+#define SAMA5D3_ID_UART0 16 /* UART 0 */
+#define SAMA5D3_ID_UART1 17 /* UART 1 */
+#define SAMA5D3_ID_TWI0 18 /* Two-Wire Interface 0 */
+#define SAMA5D3_ID_TWI1 19 /* Two-Wire Interface 1 */
+#define SAMA5D3_ID_TWI2 20 /* Two-Wire Interface 2 */
+#define SAMA5D3_ID_HSMCI0 21 /* MCI */
+#define SAMA5D3_ID_HSMCI1 22 /* MCI */
+#define SAMA5D3_ID_HSMCI2 23 /* MCI */
+#define SAMA5D3_ID_SPI0 24 /* Serial Peripheral Interface 0 */
+#define SAMA5D3_ID_SPI1 25 /* Serial Peripheral Interface 1 */
+#define SAMA5D3_ID_TC0 26 /* Timer Counter 0 */
+#define SAMA5D3_ID_TC1 27 /* Timer Counter 2 */
+#define SAMA5D3_ID_PWM 28 /* Pulse Width Modulation Controller */
+#define SAMA5D3_ID_ADC 29 /* Touch Screen ADC Controller */
+#define SAMA5D3_ID_DMA0 30 /* DMA Controller 0 */
+#define SAMA5D3_ID_DMA1 31 /* DMA Controller 1 */
+#define SAMA5D3_ID_UHPHS 32 /* USB Host High Speed */
+#define SAMA5D3_ID_UDPHS 33 /* USB Device High Speed */
+#define SAMA5D3_ID_GMAC 34 /* Gigabit Ethernet MAC */
+#define SAMA5D3_ID_EMAC 35 /* Ethernet MAC */
+#define SAMA5D3_ID_LCDC 36 /* LCD Controller */
+#define SAMA5D3_ID_ISI 37 /* Image Sensor Interface */
+#define SAMA5D3_ID_SSC0 38 /* Synchronous Serial Controller 0 */
+#define SAMA5D3_ID_SSC1 39 /* Synchronous Serial Controller 1 */
+#define SAMA5D3_ID_CAN0 40 /* CAN Controller 0 */
+#define SAMA5D3_ID_CAN1 41 /* CAN Controller 1 */
+#define SAMA5D3_ID_SHA 42 /* Secure Hash Algorithm */
+#define SAMA5D3_ID_AES 43 /* Advanced Encryption Standard */
+#define SAMA5D3_ID_TDES 44 /* Triple Data Encryption Standard */
+#define SAMA5D3_ID_TRNG 45 /* True Random Generator Number */
+#define SAMA5D3_ID_IRQ0 47 /* Advanced Interrupt Controller (IRQ0) */
+
+/*
+ * Internal Memory
+ */
+#define SAMA5D3_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define SAMA5D3_SRAM_SIZE (128 * SZ_1K) /* Internal SRAM size (128Kb) */
+
+#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 73f1f25..530db30 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -270,6 +270,8 @@
at91rm9200_standby();
else if (cpu_is_at91sam9g45())
at91sam9g45_standby();
+ else if (cpu_is_at91sam9263())
+ at91sam9263_standby();
else
at91sam9_standby();
break;
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 38f467c..2f5908f 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -70,13 +70,31 @@
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}
-#ifdef CONFIG_SOC_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
*/
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
+static inline void at91sam9263_standby(void)
+{
+ u32 lpr0, lpr1;
+ u32 saved_lpr0, saved_lpr1;
+
+ saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+ lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+
+ saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
+ lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
+ lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+
+ /* self-refresh mode now */
+ at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
+ at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
+
+ cpu_do_idle();
+
+ at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
+ at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
+}
static inline void at91sam9_standby(void)
{
diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c
new file mode 100644
index 0000000..4012797
--- /dev/null
+++ b/arch/arm/mach-at91/sama5d3.c
@@ -0,0 +1,377 @@
+/*
+ * Chip-specific setup code for the SAMA5D3 family
+ *
+ * Copyright (C) 2013 Atmel,
+ * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/sama5d3.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
+
+#include "soc.h"
+#include "generic.h"
+#include "clock.h"
+#include "sam9_smc.h"
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pid = SAMA5D3_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pid = SAMA5D3_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pid = SAMA5D3_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioD_clk = {
+ .name = "pioD_clk",
+ .pid = SAMA5D3_ID_PIOD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioE_clk = {
+ .name = "pioE_clk",
+ .pid = SAMA5D3_ID_PIOE,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pid = SAMA5D3_ID_USART0,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pid = SAMA5D3_ID_USART1,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pid = SAMA5D3_ID_USART2,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pid = SAMA5D3_ID_USART3,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk uart0_clk = {
+ .name = "uart0_clk",
+ .pid = SAMA5D3_ID_UART0,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk uart1_clk = {
+ .name = "uart1_clk",
+ .pid = SAMA5D3_ID_UART1,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pid = SAMA5D3_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pid = SAMA5D3_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk twi2_clk = {
+ .name = "twi2_clk",
+ .pid = SAMA5D3_ID_TWI2,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pid = SAMA5D3_ID_HSMCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pid = SAMA5D3_ID_HSMCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc2_clk = {
+ .name = "mci2_clk",
+ .pid = SAMA5D3_ID_HSMCI2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pid = SAMA5D3_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pid = SAMA5D3_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb0_clk = {
+ .name = "tcb0_clk",
+ .pid = SAMA5D3_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk tcb1_clk = {
+ .name = "tcb1_clk",
+ .pid = SAMA5D3_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk adc_clk = {
+ .name = "adc_clk",
+ .pid = SAMA5D3_ID_ADC,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk adc_op_clk = {
+ .name = "adc_op_clk",
+ .type = CLK_TYPE_PERIPHERAL,
+ .rate_hz = 5000000,
+};
+static struct clk dma0_clk = {
+ .name = "dma0_clk",
+ .pid = SAMA5D3_ID_DMA0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma1_clk = {
+ .name = "dma1_clk",
+ .pid = SAMA5D3_ID_DMA1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+ .name = "uhphs",
+ .pid = SAMA5D3_ID_UHPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+ .name = "udphs_clk",
+ .pid = SAMA5D3_ID_UDPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+/* gmac only for sama5d33, sama5d34, sama5d35 */
+static struct clk macb0_clk = {
+ .name = "macb0_clk",
+ .pid = SAMA5D3_ID_GMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+/* emac only for sama5d31, sama5d35 */
+static struct clk macb1_clk = {
+ .name = "macb1_clk",
+ .pid = SAMA5D3_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+/* lcd only for sama5d31, sama5d33, sama5d34 */
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pid = SAMA5D3_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+/* isi only for sama5d33, sama5d35 */
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pid = SAMA5D3_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk can0_clk = {
+ .name = "can0_clk",
+ .pid = SAMA5D3_ID_CAN0,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk can1_clk = {
+ .name = "can1_clk",
+ .pid = SAMA5D3_ID_CAN1,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pid = SAMA5D3_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pid = SAMA5D3_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV2,
+};
+static struct clk sha_clk = {
+ .name = "sha_clk",
+ .pid = SAMA5D3_ID_SHA,
+ .type = CLK_TYPE_PERIPHERAL,
+ .div = AT91_PMC_PCR_DIV8,
+};
+static struct clk aes_clk = {
+ .name = "aes_clk",
+ .pid = SAMA5D3_ID_AES,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tdes_clk = {
+ .name = "tdes_clk",
+ .pid = SAMA5D3_ID_TDES,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &pioD_clk,
+ &pioE_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &usart3_clk,
+ &uart0_clk,
+ &uart1_clk,
+ &twi0_clk,
+ &twi1_clk,
+ &twi2_clk,
+ &mmc0_clk,
+ &mmc1_clk,
+ &mmc2_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &tcb0_clk,
+ &tcb1_clk,
+ &adc_clk,
+ &adc_op_clk,
+ &dma0_clk,
+ &dma1_clk,
+ &uhphs_clk,
+ &udphs_clk,
+ &macb0_clk,
+ &macb1_clk,
+ &lcdc_clk,
+ &isi_clk,
+ &can0_clk,
+ &can1_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &sha_clk,
+ &aes_clk,
+ &tdes_clk,
+};
+
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+ /* lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
+ CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioD_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioE_clk),
+ CLKDEV_CON_DEV_ID("usart", "f001c000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "f0020000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart3_clk),
+ CLKDEV_CON_DEV_ID(NULL, "f0014000.i2c", &twi0_clk),
+ CLKDEV_CON_DEV_ID(NULL, "f0018000.i2c", &twi1_clk),
+ CLKDEV_CON_DEV_ID(NULL, "f801c000.i2c", &twi2_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "f0000000.mmc", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "f8000000.mmc", &mmc1_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "f8004000.mmc", &mmc2_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "f8008000.spi", &spi1_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "f0010000.timer", &tcb0_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "f8014000.timer", &tcb1_clk),
+ CLKDEV_CON_DEV_ID("tsc_clk", "f8018000.tsadcc", &adc_clk),
+ CLKDEV_CON_DEV_ID("dma_clk", "ffffe600.dma-controller", &dma0_clk),
+ CLKDEV_CON_DEV_ID("dma_clk", "ffffe800.dma-controller", &dma1_clk),
+ CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
+ CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
+ CLKDEV_CON_DEV_ID("hclk", "f0028000.ethernet", &macb0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "f0028000.ethernet", &macb0_clk),
+ CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "f802c000.ethernet", &macb1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "f0008000.ssc", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "f000c000.ssc", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("can_clk", "f000c000.can", &can0_clk),
+ CLKDEV_CON_DEV_ID("can_clk", "f8010000.can", &can1_clk),
+ CLKDEV_CON_DEV_ID("sha_clk", "f8034000.sha", &sha_clk),
+ CLKDEV_CON_DEV_ID("aes_clk", "f8038000.aes", &aes_clk),
+ CLKDEV_CON_DEV_ID("tdes_clk", "f803c000.tdes", &tdes_clk),
+};
+
+static void __init sama5d3_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+}
+
+/* --------------------------------------------------------------------
+ * AT91SAM9x5 processor initialization
+ * -------------------------------------------------------------------- */
+
+static void __init sama5d3_map_io(void)
+{
+ at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE);
+}
+
+AT91_SOC_START(sama5d3)
+ .map_io = sama5d3_map_io,
+ .register_clocks = sama5d3_register_clocks,
+AT91_SOC_END
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 4b67847..fd00a09 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -105,28 +105,32 @@
switch (socid) {
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
- if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+ if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN)
at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
at91_boot_soc = at91rm9200_soc;
break;
case ARCH_ID_AT91SAM9260:
at91_soc_initdata.type = AT91_SOC_SAM9260;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9260_soc;
break;
case ARCH_ID_AT91SAM9261:
at91_soc_initdata.type = AT91_SOC_SAM9261;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9261_soc;
break;
case ARCH_ID_AT91SAM9263:
at91_soc_initdata.type = AT91_SOC_SAM9263;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9263_soc;
break;
case ARCH_ID_AT91SAM9G20:
at91_soc_initdata.type = AT91_SOC_SAM9G20;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9260_soc;
break;
@@ -139,6 +143,7 @@
case ARCH_ID_AT91SAM9RL64:
at91_soc_initdata.type = AT91_SOC_SAM9RL;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9rl_soc;
break;
@@ -151,11 +156,17 @@
at91_soc_initdata.type = AT91_SOC_SAM9N12;
at91_boot_soc = at91sam9n12_soc;
break;
+
+ case ARCH_ID_SAMA5D3:
+ at91_soc_initdata.type = AT91_SOC_SAMA5D3;
+ at91_boot_soc = sama5d3_soc;
+ break;
}
/* at91sam9g10 */
if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
at91_soc_initdata.type = AT91_SOC_SAM9G10;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9261_soc;
}
/* at91sam9xe */
@@ -206,6 +217,23 @@
break;
}
}
+
+ if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) {
+ switch (at91_soc_initdata.exid) {
+ case ARCH_EXID_SAMA5D31:
+ at91_soc_initdata.subtype = AT91_SOC_SAMA5D31;
+ break;
+ case ARCH_EXID_SAMA5D33:
+ at91_soc_initdata.subtype = AT91_SOC_SAMA5D33;
+ break;
+ case ARCH_EXID_SAMA5D34:
+ at91_soc_initdata.subtype = AT91_SOC_SAMA5D34;
+ break;
+ case ARCH_EXID_SAMA5D35:
+ at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
+ break;
+ }
+ }
}
static const char *soc_name[] = {
@@ -219,7 +247,8 @@
[AT91_SOC_SAM9RL] = "at91sam9rl",
[AT91_SOC_SAM9X5] = "at91sam9x5",
[AT91_SOC_SAM9N12] = "at91sam9n12",
- [AT91_SOC_NONE] = "Unknown"
+ [AT91_SOC_SAMA5D3] = "sama5d3",
+ [AT91_SOC_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_type(struct at91_socinfo *c)
@@ -241,7 +270,12 @@
[AT91_SOC_SAM9X35] = "at91sam9x35",
[AT91_SOC_SAM9G25] = "at91sam9g25",
[AT91_SOC_SAM9X25] = "at91sam9x25",
- [AT91_SOC_SUBTYPE_NONE] = "Unknown"
+ [AT91_SOC_SAMA5D31] = "sama5d31",
+ [AT91_SOC_SAMA5D33] = "sama5d33",
+ [AT91_SOC_SAMA5D34] = "sama5d34",
+ [AT91_SOC_SAMA5D35] = "sama5d35",
+ [AT91_SOC_SUBTYPE_NONE] = "None",
+ [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_subtype(struct at91_socinfo *c)
@@ -255,8 +289,8 @@
/* Map peripherals */
iotable_init(&at91_io_desc, 1);
- at91_soc_initdata.type = AT91_SOC_NONE;
- at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
+ at91_soc_initdata.type = AT91_SOC_UNKNOWN;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
soc_detect(AT91_BASE_DBGU0);
if (!at91_soc_is_detected())
@@ -267,8 +301,9 @@
pr_info("AT91: Detected soc type: %s\n",
at91_get_soc_type(&at91_soc_initdata));
- pr_info("AT91: Detected soc subtype: %s\n",
- at91_get_soc_subtype(&at91_soc_initdata));
+ if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
+ pr_info("AT91: Detected soc subtype: %s\n",
+ at91_get_soc_subtype(&at91_soc_initdata));
if (!at91_soc_is_enabled())
panic("AT91: Soc not enabled");
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 9c6d3d4..43a225f 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -22,9 +22,10 @@
extern struct at91_init_soc at91sam9rl_soc;
extern struct at91_init_soc at91sam9x5_soc;
extern struct at91_init_soc at91sam9n12_soc;
+extern struct at91_init_soc sama5d3_soc;
#define AT91_SOC_START(_name) \
-struct at91_init_soc __initdata at91##_name##_soc \
+struct at91_init_soc __initdata _name##_soc \
__used \
= { \
.builtin = 1, \
@@ -68,3 +69,7 @@
#if !defined(CONFIG_SOC_AT91SAM9N12)
#define at91sam9n12_soc at91_boot_soc
#endif
+
+#if !defined(CONFIG_SOC_SAMA5D3)
+#define sama5d3_soc at91_boot_soc
+#endif
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index e698f26..52e4bb5 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -22,19 +22,9 @@
static struct map_desc cns3xxx_io_desc[] __initdata = {
{
- .virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
- .length = SZ_4K,
+ .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT,
+ .pfn = __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
+ .length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT,
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
index 191c8e5..b1021aa 100644
--- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -94,10 +94,10 @@
#define RTC_INTR_STS_OFFSET 0x34
#define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT 0xFB000000 /* Misc Control */
#define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT 0xFFF08000
+#define CNS3XXX_PM_BASE_VIRT 0xFB001000
#define PM_CLK_GATE_OFFSET 0x00
#define PM_SOFT_RST_OFFSET 0x04
@@ -109,7 +109,7 @@
#define PM_PLL_HM_PD_OFFSET 0x1C
#define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000
+#define CNS3XXX_UART0_BASE_VIRT 0xFB002000
#define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */
#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000
@@ -130,7 +130,7 @@
#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000
#define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFB003000
#define TIMER1_COUNTER_OFFSET 0x00
#define TIMER1_AUTO_RELOAD_OFFSET 0x04
@@ -227,16 +227,16 @@
* Testchip peripheral and fpga gic regions
*/
#define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFB004000
#define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
#define CNS3XXX_TC11MP_TWD_BASE 0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
#define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
#define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */
#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index d2afb4dd..b5cc77d 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -47,9 +47,13 @@
static inline void putc(int c)
{
- /* Transmit fifo not full? */
- while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
- ;
+ int i;
+
+ for (i = 0; i < 10000; i++) {
+ /* Transmit fifo not full? */
+ if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
+ break;
+ }
__raw_writeb(c, PHYS_UART_DATA);
}
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 5a800bf..5bf4a97 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -110,6 +110,8 @@
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern u32 imx_get_cpu_arg(int cpu);
+extern void imx_set_cpu_arg(int cpu, u32 arg);
extern void v7_cpu_resume(void);
extern u32 *pl310_get_save_ptr(void);
#ifdef CONFIG_SMP
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 7bc5fe1..361a253 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -46,11 +46,23 @@
void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
+ /*
+ * We use the cpu jumping argument register to sync with
+ * imx_cpu_kill() which is running on cpu0 and waiting for
+ * the register being cleared to kill the cpu.
+ */
+ imx_set_cpu_arg(cpu, ~0);
cpu_do_idle();
}
int imx_cpu_kill(unsigned int cpu)
{
+ unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+ while (imx_get_cpu_arg(cpu) == 0)
+ if (time_after(jiffies, timeout))
+ return 0;
imx_enable_cpu(cpu, false);
+ imx_set_cpu_arg(cpu, 0);
return 1;
}
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index e15f155..09a742f8c 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -43,6 +43,18 @@
src_base + SRC_GPR1 + cpu * 8);
}
+u32 imx_get_cpu_arg(int cpu)
+{
+ cpu = cpu_logical_map(cpu);
+ return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
+void imx_set_cpu_arg(int cpu, u32 arg)
+{
+ cpu = cpu_logical_map(cpu);
+ writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
void imx_src_prepare_restart(void)
{
u32 val;
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 1c6e736..08dd739 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -53,6 +53,8 @@
static struct mvsdio_platform_data guruplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
+ .gpio_card_detect = -1,
+ .gpio_write_protect = -1,
};
static struct gpio_led guruplug_led_pins[] = {
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 8ddd69f..6a6eb54 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -55,6 +55,7 @@
static struct mvsdio_platform_data openrd_mvsdio_data = {
.gpio_card_detect = 29, /* MPP29 used as SD card detect */
+ .gpio_write_protect = -1,
};
static unsigned int openrd_mpp_config[] __initdata = {
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index c7d93b4..d242231 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -69,6 +69,7 @@
static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
.gpio_card_detect = 28,
+ .gpio_write_protect = -1,
};
static unsigned int rd88f6281_mpp_config[] __initdata = {
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 2969027..f9fd77e 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -62,7 +62,10 @@
{
u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
- writel_relaxed(0, event_base + TIMER_CLEAR);
+ ctrl &= ~TIMER_ENABLE_EN;
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+ writel_relaxed(ctrl, event_base + TIMER_CLEAR);
writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
return 0;
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index da93bcb..c3be068 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -5,6 +5,6 @@
obj-y += system-controller.o
obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
-obj-$(CONFIG_ARCH_MVEBU) += addr-map.o coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o
+obj-$(CONFIG_ARCH_MVEBU) += addr-map.o coherency.o coherency_ll.o pmsu.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index a5ea616d..433e8c5 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -19,6 +19,8 @@
#include <linux/time-armada-370-xp.h>
#include <linux/clk/mvebu.h>
#include <linux/dma-mapping.h>
+#include <linux/irqchip.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -54,6 +56,10 @@
* to make sure such the allocations won't fail.
*/
init_dma_coherent_pool_size(SZ_1M);
+
+#ifdef CONFIG_CACHE_L2X0
+ l2x0_of_init(0, ~0UL);
+#endif
}
static void __init armada_370_xp_dt_init(void)
@@ -72,8 +78,7 @@
.init_machine = armada_370_xp_dt_init,
.map_io = armada_370_xp_map_io,
.init_early = armada_370_xp_init_early,
- .init_irq = armada_370_xp_init_irq,
- .handle_irq = armada_370_xp_handle_irq,
+ .init_irq = irqchip_init,
.init_time = armada_370_xp_timer_and_clk_init,
.restart = mvebu_restart,
.dt_compat = armada_370_xp_dt_compat,
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index cb7c6ae..6c4f766 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -543,15 +543,6 @@
/* Direct from ULPD, no parent */
.rate = 48000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
- .enable_bit = USB_REQ_EN_SHIFT,
-};
-
-static struct clk usb_dc_ck7xx = {
- .name = "usb_dc_ck",
- .ops = &clkops_generic,
- /* Direct from ULPD, no parent */
- .rate = 48000000,
- .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
.enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT,
};
@@ -727,8 +718,7 @@
CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
- CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
- CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX),
+ CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX),
CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index 753cd5c..45e5ac7 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -2,7 +2,7 @@
* FIXME correct answer depends on hmc_mode,
* as does (on omap1) any nonzero value for config->otg port number
*/
-#ifdef CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
#define is_usb0_device(config) 1
#else
#define is_usb0_device(config) 0
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 1a1db59..4118db5 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -123,7 +123,7 @@
syscon = omap_readl(OTG_SYSCON_1);
syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
-#ifdef CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
if (config->otg || config->register_dev) {
struct platform_device *udc_device = config->udc_device;
int status;
@@ -169,7 +169,7 @@
void omap_otg_init(struct omap_usb_config *config) {}
#endif
-#ifdef CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
static struct resource udc_resources[] = {
/* order is significant! */
@@ -600,7 +600,7 @@
while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
cpu_relax();
-#ifdef CONFIG_USB_GADGET_OMAP
+#if IS_ENABLED(CONFIG_USB_OMAP)
if (config->register_dev) {
int status;
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b068b7f..62bb352c 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -229,7 +229,6 @@
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
-obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
@@ -255,8 +254,6 @@
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o
-obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o
-
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index cb0596b..244d8a5 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -38,7 +38,7 @@
#include "gpmc-smc91x.h"
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-data.h>
#include "mux.h"
#include "hsmmc.h"
@@ -108,24 +108,13 @@
#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
-static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1);
- gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1);
-
- return 0;
-}
-
-static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0);
- gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0);
-}
-
static struct panel_generic_dpi_data sdp2430_panel_data = {
.name = "nec_nl2432dr22-11b",
- .platform_enable = sdp2430_panel_enable_lcd,
- .platform_disable = sdp2430_panel_disable_lcd,
+ .num_gpios = 2,
+ .gpios = {
+ SDP2430_LCD_PANEL_ENABLE_GPIO,
+ SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
+ },
};
static struct omap_dss_device sdp2430_lcd_device = {
@@ -146,26 +135,6 @@
.default_device = &sdp2430_lcd_device,
};
-static void __init sdp2430_display_init(void)
-{
- int r;
-
- static struct gpio gpios[] __initdata = {
- { SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
- "LCD reset" },
- { SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW,
- "LCD Backlight" },
- };
-
- r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
- if (r) {
- pr_err("Cannot request LCD GPIOs, error %d\n", r);
- return;
- }
-
- omap_display_init(&sdp2430_dss_data);
-}
-
#if IS_ENABLED(CONFIG_SMC91X)
static struct omap_smc91x_platform_data board_smc91x_data = {
@@ -273,7 +242,7 @@
gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
"Secondary LCD backlight");
- sdp2430_display_init();
+ omap_display_init(&sdp2430_dss_data);
}
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 7eb9651..23b004a 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -35,7 +35,7 @@
#include "common.h"
#include <linux/omap-dma.h>
#include <video/omapdss.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
#include "gpmc.h"
#include "gpmc-smc91x.h"
@@ -108,53 +108,38 @@
#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
#define SDP3430_LCD_PANEL_ENABLE_GPIO 5
-static struct gpio sdp3430_dss_gpios[] __initdata = {
- {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" },
- {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
-};
-
static void __init sdp3430_display_init(void)
{
int r;
- r = gpio_request_array(sdp3430_dss_gpios,
- ARRAY_SIZE(sdp3430_dss_gpios));
+ /*
+ * the backlight GPIO doesn't directly go to the panel, it enables
+ * an internal circuit on 3430sdp to create the signal V_BKL_28V,
+ * this is connected to LED+ pin of the sharp panel. This GPIO
+ * is left enabled in the board file, and not passed to the panel
+ * as platform_data.
+ */
+ r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO,
+ GPIOF_OUT_INIT_HIGH, "LCD Backlight");
if (r)
- printk(KERN_ERR "failed to get LCD control GPIOs\n");
+ pr_err("failed to get LCD Backlight GPIO\n");
}
-static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
- gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
-
- return 0;
-}
-
-static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
- gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
-}
-
-static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
+static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = {
+ .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
+ .ini_gpio = -1,
+ .mo_gpio = -1,
+ .lr_gpio = -1,
+ .ud_gpio = -1,
+};
static struct omap_dss_device sdp3430_lcd_device = {
.name = "lcd",
.driver_name = "sharp_ls_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 16,
- .platform_enable = sdp3430_panel_enable_lcd,
- .platform_disable = sdp3430_panel_disable_lcd,
+ .data = &sdp3430_lcd_data,
};
static struct tfp410_platform_data dvi_panel = {
@@ -175,8 +160,6 @@
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = sdp3430_panel_enable_tv,
- .platform_disable = sdp3430_panel_disable_tv,
};
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 35f3ad0..00d7290 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -291,6 +291,10 @@
},
};
+/* Dummy regulator for pwm-backlight driver */
+static struct regulator_consumer_supply backlight_supply =
+ REGULATOR_SUPPLY("enable", "pwm-backlight");
+
static struct platform_pwm_backlight_data sdp4430_backlight_data = {
.max_brightness = 127,
.dft_brightness = 127,
@@ -718,6 +722,8 @@
omap4_i2c_init();
omap_sfh7741prox_init();
+ regulator_register_always_on(0, "backlight-enable",
+ &backlight_supply, 1, 0);
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 191f976..d63f14b 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -35,8 +35,7 @@
#include "common.h"
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
#include "am35xx-emac.h"
#include "mux.h"
@@ -121,63 +120,14 @@
return 0;
}
-static int lcd_enabled;
-static int dvi_enabled;
-
-#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
- defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-static struct gpio am3517_evm_dss_gpios[] __initdata = {
- /* GPIO 182 = LCD Backlight Power */
- { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" },
- /* GPIO 181 = LCD Panel PWM */
- { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" },
- /* GPIO 176 = LCD Panel Power enable pin */
- { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" },
-};
-
-static void __init am3517_evm_display_init(void)
-{
- int r;
-
- omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
-
- r = gpio_request_array(am3517_evm_dss_gpios,
- ARRAY_SIZE(am3517_evm_dss_gpios));
- if (r) {
- printk(KERN_ERR "failed to get DSS panel control GPIOs\n");
- return;
- }
-
- printk(KERN_INFO "Display initialized successfully\n");
-}
-#else
-static void __init am3517_evm_display_init(void) {}
-#endif
-
-static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (dvi_enabled) {
- printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
- return -EINVAL;
- }
- gpio_set_value(LCD_PANEL_PWR, 1);
- lcd_enabled = 1;
-
- return 0;
-}
-
-static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_set_value(LCD_PANEL_PWR, 0);
- lcd_enabled = 0;
-}
-
static struct panel_generic_dpi_data lcd_panel = {
.name = "sharp_lq",
- .platform_enable = am3517_evm_panel_enable_lcd,
- .platform_disable = am3517_evm_panel_disable_lcd,
+ .num_gpios = 3,
+ .gpios = {
+ LCD_PANEL_PWR,
+ LCD_PANEL_BKLIGHT_PWR,
+ LCD_PANEL_PWM,
+ },
};
static struct omap_dss_device am3517_evm_lcd_device = {
@@ -188,22 +138,11 @@
.phy.dpi.data_lines = 16,
};
-static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct omap_dss_device am3517_evm_tv_device = {
.type = OMAP_DISPLAY_TYPE_VENC,
.name = "tv",
.driver_name = "venc",
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = am3517_evm_panel_enable_tv,
- .platform_disable = am3517_evm_panel_disable_tv,
};
static struct tfp410_platform_data dvi_panel = {
@@ -366,8 +305,6 @@
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
- /* DSS */
- am3517_evm_display_init();
/* RTC - S35390A */
am3517_evm_rtc_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 7fda3f5..ee6218c 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -41,8 +41,7 @@
#include <linux/platform_data/mtd-nand-omap2.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include "common.h"
@@ -191,45 +190,12 @@
#define CM_T35_LCD_BL_GPIO 58
#define CM_T35_DVI_EN_GPIO 54
-static int lcd_enabled;
-static int dvi_enabled;
-
-static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (dvi_enabled) {
- printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
- return -EINVAL;
- }
-
- gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
- gpio_set_value(CM_T35_LCD_BL_GPIO, 1);
-
- lcd_enabled = 1;
-
- return 0;
-}
-
-static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- lcd_enabled = 0;
-
- gpio_set_value(CM_T35_LCD_BL_GPIO, 0);
- gpio_set_value(CM_T35_LCD_EN_GPIO, 0);
-}
-
-static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct panel_generic_dpi_data lcd_panel = {
.name = "toppoly_tdo35s",
- .platform_enable = cm_t35_panel_enable_lcd,
- .platform_disable = cm_t35_panel_disable_lcd,
+ .num_gpios = 1,
+ .gpios = {
+ CM_T35_LCD_BL_GPIO,
+ },
};
static struct omap_dss_device cm_t35_lcd_device = {
@@ -258,8 +224,6 @@
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = cm_t35_panel_enable_tv,
- .platform_disable = cm_t35_panel_disable_tv,
};
static struct omap_dss_device *cm_t35_dss_devices[] = {
@@ -293,11 +257,6 @@
},
};
-static struct gpio cm_t35_dss_gpios[] __initdata = {
- { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" },
- { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" },
-};
-
static void __init cm_t35_init_display(void)
{
int err;
@@ -305,23 +264,21 @@
spi_register_board_info(cm_t35_lcd_spi_board_info,
ARRAY_SIZE(cm_t35_lcd_spi_board_info));
- err = gpio_request_array(cm_t35_dss_gpios,
- ARRAY_SIZE(cm_t35_dss_gpios));
+
+ err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,
+ "lcd bl enable");
if (err) {
- pr_err("CM-T35: failed to request DSS control GPIOs\n");
+ pr_err("CM-T35: failed to request LCD EN GPIO\n");
return;
}
- gpio_export(CM_T35_LCD_EN_GPIO, 0);
- gpio_export(CM_T35_LCD_BL_GPIO, 0);
-
msleep(50);
gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
err = omap_display_init(&cm_t35_dss_data);
if (err) {
pr_err("CM-T35: failed to register DSS device\n");
- gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios));
+ gpio_free(CM_T35_LCD_EN_GPIO);
}
}
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 42fbf1e..5764205 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -43,8 +43,7 @@
#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/input/matrix_keypad.h>
@@ -104,19 +103,6 @@
{} /* Terminator */
};
-static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value_cansleep(dssdev->reset_gpio, 1);
- return 0;
-}
-
-static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value_cansleep(dssdev->reset_gpio, 0);
-}
-
static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -128,8 +114,7 @@
static struct panel_generic_dpi_data lcd_panel = {
.name = "innolux_at070tn83",
- .platform_enable = devkit8000_panel_enable_lcd,
- .platform_disable = devkit8000_panel_disable_lcd,
+ /* gpios filled in code */
};
static struct omap_dss_device devkit8000_lcd_device = {
@@ -211,8 +196,6 @@
static int devkit8000_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- int ret;
-
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap_hsmmc_late_init(mmc);
@@ -221,13 +204,8 @@
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
- devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
- ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
- GPIOF_OUT_INIT_LOW, "LCD_PWREN");
- if (ret < 0) {
- devkit8000_lcd_device.reset_gpio = -EINVAL;
- printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
- }
+ lcd_panel.num_gpios = 1;
+ lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0;
/* gpio + 7 is "DVI_PD" (out, active low) */
dvi_panel.power_down_gpio = gpio + 7;
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 5b4ec51..69c0acf 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -34,7 +34,7 @@
#include <asm/mach/map.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-data.h>
#include "common.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 95ccec0..b54562d 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -31,7 +31,7 @@
#include <asm/mach/arch.h>
#include <video/omapdss.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include "common.h"
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index b12fe96..d0d17bc 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -41,7 +41,7 @@
#include "gpmc-smsc911x.h"
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-data.h>
#include "board-flash.h"
#include "mux.h"
@@ -181,34 +181,13 @@
/* LCD */
-static int ldp_backlight_gpio;
-static int ldp_lcd_enable_gpio;
-
#define LCD_PANEL_RESET_GPIO 55
#define LCD_PANEL_QVGA_GPIO 56
-static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(ldp_lcd_enable_gpio))
- gpio_direction_output(ldp_lcd_enable_gpio, 1);
- if (gpio_is_valid(ldp_backlight_gpio))
- gpio_direction_output(ldp_backlight_gpio, 1);
-
- return 0;
-}
-
-static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(ldp_lcd_enable_gpio))
- gpio_direction_output(ldp_lcd_enable_gpio, 0);
- if (gpio_is_valid(ldp_backlight_gpio))
- gpio_direction_output(ldp_backlight_gpio, 0);
-}
-
static struct panel_generic_dpi_data ldp_panel_data = {
.name = "nec_nl2432dr22-11b",
- .platform_enable = ldp_panel_enable_lcd,
- .platform_disable = ldp_panel_disable_lcd,
+ .num_gpios = 4,
+ /* gpios filled in code */
};
static struct omap_dss_device ldp_lcd_device = {
@@ -231,41 +210,19 @@
static void __init ldp_display_init(void)
{
- int r;
-
- static struct gpio gpios[] __initdata = {
- {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
- {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
- };
-
- r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
- if (r) {
- pr_err("Cannot request LCD GPIOs, error %d\n", r);
- return;
- }
+ ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO;
+ ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO;
omap_display_init(&ldp_dss_data);
}
static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
{
- int r;
+ ldp_panel_data.gpios[0] = gpio + 7;
+ ldp_panel_data.gpio_invert[0] = true;
- struct gpio gpios[] = {
- {gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"},
- {gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"},
- };
-
- r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
- if (r) {
- pr_err("Cannot request LCD GPIOs, error %d\n", r);
- ldp_backlight_gpio = -EINVAL;
- ldp_lcd_enable_gpio = -EINVAL;
- return r;
- }
-
- ldp_backlight_gpio = gpio + 15;
- ldp_lcd_enable_gpio = gpio + 7;
+ ldp_panel_data.gpios[1] = gpio + 15;
+ ldp_panel_data.gpio_invert[1] = true;
return 0;
}
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6955a42..6de7860 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -44,7 +44,7 @@
#include <asm/mach/flash.h>
#include <video/omapdss.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 2de92fa..f76d0de 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -51,7 +51,7 @@
#include "common.h"
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
#include "soc.h"
#include "mux.h"
@@ -155,61 +155,43 @@
#define OMAP3EVM_LCD_PANEL_LR 2
#define OMAP3EVM_LCD_PANEL_UD 3
#define OMAP3EVM_LCD_PANEL_INI 152
-#define OMAP3EVM_LCD_PANEL_ENVDD 153
#define OMAP3EVM_LCD_PANEL_QVGA 154
#define OMAP3EVM_LCD_PANEL_RESB 155
+
+#define OMAP3EVM_LCD_PANEL_ENVDD 153
#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210
+
+/*
+ * OMAP3EVM DVI control signals
+ */
#define OMAP3EVM_DVI_PANEL_EN_GPIO 199
-static struct gpio omap3_evm_dss_gpios[] __initdata = {
- { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" },
- { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" },
- { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" },
- { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" },
- { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" },
- { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" },
+static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = {
+ .resb_gpio = OMAP3EVM_LCD_PANEL_RESB,
+ .ini_gpio = OMAP3EVM_LCD_PANEL_INI,
+ .mo_gpio = OMAP3EVM_LCD_PANEL_QVGA,
+ .lr_gpio = OMAP3EVM_LCD_PANEL_LR,
+ .ud_gpio = OMAP3EVM_LCD_PANEL_UD,
};
-static int lcd_enabled;
-static int dvi_enabled;
-
static void __init omap3_evm_display_init(void)
{
int r;
- r = gpio_request_array(omap3_evm_dss_gpios,
- ARRAY_SIZE(omap3_evm_dss_gpios));
+ r = gpio_request_one(OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW,
+ "lcd_panel_envdd");
if (r)
- printk(KERN_ERR "failed to get lcd_panel_* gpios\n");
-}
+ pr_err("failed to get lcd_panel_envdd GPIO\n");
-static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (dvi_enabled) {
- printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
- return -EINVAL;
- }
- gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
+ r = gpio_request_one(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO,
+ GPIOF_OUT_INIT_LOW, "lcd_panel_bklight");
+ if (r)
+ pr_err("failed to get lcd_panel_bklight GPIO\n");
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
else
gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
-
- lcd_enabled = 1;
- return 0;
-}
-
-static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
-
- if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
- gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
- else
- gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
-
- lcd_enabled = 0;
}
static struct omap_dss_device omap3_evm_lcd_device = {
@@ -217,26 +199,14 @@
.driver_name = "sharp_ls_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 18,
- .platform_enable = omap3_evm_enable_lcd,
- .platform_disable = omap3_evm_disable_lcd,
+ .data = &omap3_evm_lcd_data,
};
-static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct omap_dss_device omap3_evm_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = omap3_evm_enable_tv,
- .platform_disable = omap3_evm_disable_tv,
};
static struct tfp410_platform_data dvi_panel = {
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1004d2a..28133d5 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -44,6 +44,7 @@
#include "common.h"
#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include "mux.h"
@@ -230,12 +231,16 @@
.rep = 1,
};
+static struct panel_tpo_td043_data lcd_data = {
+ .nreset_gpio = 157,
+};
+
static struct omap_dss_device pandora_lcd_device = {
.name = "lcd",
.driver_name = "tpo_td043mtea1_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
- .reset_gpio = 157,
+ .data = &lcd_data,
};
static struct omap_dss_device pandora_tv_device = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index bf09564..d37e6b1 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -44,8 +44,7 @@
#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
@@ -95,15 +94,6 @@
return;
}
-static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct omap_dss_device omap3_stalker_tv_device = {
.name = "tv",
.driver_name = "venc",
@@ -113,8 +103,6 @@
#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
.u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
#endif
- .platform_enable = omap3_stalker_enable_tv,
- .platform_disable = omap3_stalker_disable_tv,
};
static struct tfp410_platform_data dvi_panel = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index ab79a44..4ca6b68 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -47,8 +47,7 @@
#include <asm/mach/map.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
#include "common.h"
#include "mux.h"
@@ -146,28 +145,9 @@
#endif
/* DSS */
-static int lcd_enabled;
-static int dvi_enabled;
-
#define OVERO_GPIO_LCD_EN 144
#define OVERO_GPIO_LCD_BL 145
-static struct gpio overo_dss_gpios[] __initdata = {
- { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" },
- { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" },
-};
-
-static void __init overo_display_init(void)
-{
- if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) {
- printk(KERN_ERR "could not obtain DSS control GPIOs\n");
- return;
- }
-
- gpio_export(OVERO_GPIO_LCD_EN, 0);
- gpio_export(OVERO_GPIO_LCD_BL, 0);
-}
-
static struct tfp410_platform_data dvi_panel = {
.i2c_bus_num = 3,
.power_down_gpio = -1,
@@ -188,30 +168,13 @@
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
};
-static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (dvi_enabled) {
- printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
- return -EINVAL;
- }
-
- gpio_set_value(OVERO_GPIO_LCD_EN, 1);
- gpio_set_value(OVERO_GPIO_LCD_BL, 1);
- lcd_enabled = 1;
- return 0;
-}
-
-static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_set_value(OVERO_GPIO_LCD_EN, 0);
- gpio_set_value(OVERO_GPIO_LCD_BL, 0);
- lcd_enabled = 0;
-}
-
static struct panel_generic_dpi_data lcd43_panel = {
.name = "samsung_lte430wq_f0c",
- .platform_enable = overo_panel_enable_lcd,
- .platform_disable = overo_panel_disable_lcd,
+ .num_gpios = 2,
+ .gpios = {
+ OVERO_GPIO_LCD_EN,
+ OVERO_GPIO_LCD_BL
+ },
};
static struct omap_dss_device overo_lcd43_device = {
@@ -224,13 +187,20 @@
#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+static struct panel_generic_dpi_data lcd35_panel = {
+ .num_gpios = 2,
+ .gpios = {
+ OVERO_GPIO_LCD_EN,
+ OVERO_GPIO_LCD_BL
+ },
+};
+
static struct omap_dss_device overo_lcd35_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "lcd35",
.driver_name = "lgphilips_lb035q02_panel",
.phy.dpi.data_lines = 24,
- .platform_enable = overo_panel_enable_lcd,
- .platform_disable = overo_panel_disable_lcd,
+ .data = &lcd35_panel,
};
#endif
@@ -509,7 +479,6 @@
usbhs_init(&usbhs_bdata);
overo_spi_init();
overo_init_smsc911x();
- overo_display_init();
overo_init_led();
overo_init_keys();
omap_twl4030_audio_init("overo", NULL);
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 3a077df..1a88467 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -547,12 +547,16 @@
REGULATOR_SUPPLY("DVDD", "2-0019"),
/* Si4713 IO supply */
REGULATOR_SUPPLY("vio", "2-0063"),
+ /* lis3lv02d */
+ REGULATOR_SUPPLY("Vdd_IO", "3-001d"),
};
static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
/* Si4713 supply */
REGULATOR_SUPPLY("vdd", "2-0063"),
+ /* lis3lv02d */
+ REGULATOR_SUPPLY("Vdd", "3-001d"),
};
static struct regulator_init_data rx51_vaux1 = {
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index eb66726..bd74f9f 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -16,6 +16,8 @@
#include <linux/mm.h>
#include <asm/mach-types.h>
#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
#include <linux/platform_data/spi-omap2-mcspi.h>
#include "soc.h"
@@ -27,25 +29,16 @@
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-static int rx51_lcd_enable(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 1);
- return 0;
-}
-
-static void rx51_lcd_disable(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 0);
-}
+static struct panel_acx565akm_data lcd_data = {
+ .reset_gpio = RX51_LCD_RESET_GPIO,
+};
static struct omap_dss_device rx51_lcd_device = {
.name = "lcd",
.driver_name = "panel-acx565akm",
.type = OMAP_DISPLAY_TYPE_SDI,
.phy.sdi.datapairs = 2,
- .reset_gpio = RX51_LCD_RESET_GPIO,
- .platform_enable = rx51_lcd_enable,
- .platform_disable = rx51_lcd_disable,
+ .data = &lcd_data,
};
static struct omap_dss_device rx51_tv_device = {
@@ -76,13 +69,8 @@
return 0;
}
- if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH,
- "LCD ACX565AKM reset")) {
- pr_err("%s failed to get LCD Reset GPIO\n", __func__);
- return 0;
- }
-
omap_display_init(&rx51_dss_board_info);
+
return 0;
}
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index 8cef477..c2a079c 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -12,12 +12,12 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
-#include "board-zoom.h"
+#include <video/omap-panel-data.h>
+#include "board-zoom.h"
#include "soc.h"
#include "common.h"
@@ -25,92 +25,17 @@
#define LCD_PANEL_RESET_GPIO_PILOT 55
#define LCD_PANEL_QVGA_GPIO 56
-static struct gpio zoom_lcd_gpios[] __initdata = {
- { -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" },
- { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" },
+static struct panel_nec_nl8048_data zoom_lcd_data = {
+ /* res_gpio filled in code */
+ .qvga_gpio = LCD_PANEL_QVGA_GPIO,
};
-static void __init zoom_lcd_panel_init(void)
-{
- zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
- LCD_PANEL_RESET_GPIO_PROD :
- LCD_PANEL_RESET_GPIO_PILOT;
-
- if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios)))
- pr_err("%s: Failed to get LCD GPIOs.\n", __func__);
-}
-
-static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-}
-
-/* Register offsets in TWL4030_MODULE_INTBR */
-#define TWL_INTBR_PMBR1 0xD
-#define TWL_INTBR_GPBR1 0xC
-
-/* Register offsets in TWL_MODULE_PWM */
-#define TWL_LED_PWMON 0x3
-#define TWL_LED_PWMOFF 0x4
-
-static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level)
-{
-#ifdef CONFIG_TWL4030_CORE
- unsigned char c;
- u8 mux_pwm, enb_pwm;
-
- if (level > 100)
- return -1;
-
- twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1);
- twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1);
-
- if (level == 0) {
- /* disable pwm1 output and clock */
- enb_pwm = enb_pwm & 0xF5;
- /* change pwm1 pin to gpio pin */
- mux_pwm = mux_pwm & 0xCF;
- twl_i2c_write_u8(TWL4030_MODULE_INTBR,
- enb_pwm, TWL_INTBR_GPBR1);
- twl_i2c_write_u8(TWL4030_MODULE_INTBR,
- mux_pwm, TWL_INTBR_PMBR1);
- return 0;
- }
-
- if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) {
- /* change gpio pin to pwm1 pin */
- mux_pwm = mux_pwm | 0x30;
- /* enable pwm1 output and clock*/
- enb_pwm = enb_pwm | 0x0A;
- twl_i2c_write_u8(TWL4030_MODULE_INTBR,
- mux_pwm, TWL_INTBR_PMBR1);
- twl_i2c_write_u8(TWL4030_MODULE_INTBR,
- enb_pwm, TWL_INTBR_GPBR1);
- }
-
- c = ((50 * (100 - level)) / 100) + 1;
- twl_i2c_write_u8(TWL_MODULE_PWM, 0x7F, TWL_LED_PWMOFF);
- twl_i2c_write_u8(TWL_MODULE_PWM, c, TWL_LED_PWMON);
-#else
- pr_warn("Backlight not enabled\n");
-#endif
-
- return 0;
-}
-
static struct omap_dss_device zoom_lcd_device = {
.name = "lcd",
.driver_name = "NEC_8048_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
- .platform_enable = zoom_panel_enable_lcd,
- .platform_disable = zoom_panel_disable_lcd,
- .max_backlight_level = 100,
- .set_backlight = zoom_set_bl_intensity,
+ .data = &zoom_lcd_data,
};
static struct omap_dss_device *zoom_dss_devices[] = {
@@ -123,6 +48,13 @@
.default_device = &zoom_lcd_device,
};
+static void __init zoom_lcd_panel_init(void)
+{
+ zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
+ LCD_PANEL_RESET_GPIO_PROD :
+ LCD_PANEL_RESET_GPIO_PILOT;
+}
+
static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
.turbo_mode = 1,
};
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index cdc0c10..a90375d 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -22,6 +22,9 @@
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/omap-twl4030.h>
#include <linux/usb/phy.h>
+#include <linux/pwm.h>
+#include <linux/leds_pwm.h>
+#include <linux/pwm_backlight.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -193,6 +196,53 @@
},
};
+static struct pwm_lookup zoom_pwm_lookup[] = {
+ PWM_LOOKUP("twl-pwm", 0, "leds_pwm", "zoom::keypad"),
+ PWM_LOOKUP("twl-pwm", 1, "pwm-backlight", "backlight"),
+};
+
+static struct led_pwm zoom_pwm_leds[] = {
+ {
+ .name = "zoom::keypad",
+ .max_brightness = 127,
+ .pwm_period_ns = 7812500,
+ },
+};
+
+static struct led_pwm_platform_data zoom_pwm_data = {
+ .num_leds = ARRAY_SIZE(zoom_pwm_leds),
+ .leds = zoom_pwm_leds,
+};
+
+static struct platform_device zoom_leds_pwm = {
+ .name = "leds_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &zoom_pwm_data,
+ },
+};
+
+static struct platform_pwm_backlight_data zoom_backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = 127,
+ .dft_brightness = 127,
+ .pwm_period_ns = 7812500,
+};
+
+static struct platform_device zoom_backlight_pwm = {
+ .name = "pwm-backlight",
+ .id = -1,
+ .dev = {
+ .platform_data = &zoom_backlight_data,
+ },
+};
+
+static struct platform_device *zoom_devices[] __initdata = {
+ &omap_vwlan_device,
+ &zoom_leds_pwm,
+ &zoom_backlight_pwm,
+};
+
static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
.board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */
};
@@ -301,7 +351,8 @@
omap_hsmmc_init(mmc);
omap_i2c_init();
- platform_device_register(&omap_vwlan_device);
+ pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup));
+ platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
enable_board_wakeup_source();
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 3d58f33..0c6834a 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -52,6 +52,13 @@
*/
#define OMAP4_DPLL_ABE_DEFFREQ 98304000
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ 960000000
+
/* Root clocks */
DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -1011,6 +1018,10 @@
OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+ OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+ OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@@ -1538,6 +1549,7 @@
CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X),
CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X),
CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X),
+ CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X),
CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X),
CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X),
CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X),
@@ -1705,5 +1717,13 @@
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+ /*
+ * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+ * domain can transition to retention state when not in use.
+ */
+ rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+ if (rc)
+ pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
return 0;
}
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index bf70e2b..272490e 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -292,5 +292,8 @@
struct omap_hwmod;
extern int omap_dss_reset(struct omap_hwmod *);
+/* SoC specific clock initializer */
+extern int (*omap_clk_init)(void);
+
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 4be5cfc..393aeef 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -27,9 +27,7 @@
#include <linux/gpio.h>
#include <video/omapdss.h>
-#include <video/omap-panel-tfp410.h>
-#include <video/omap-panel-nokia-dsi.h>
-#include <video/omap-panel-picodlp.h>
+#include <video/omap-panel-data.h>
#include "soc.h"
#include "dss-common.h"
@@ -54,7 +52,6 @@
.driver_name = "tfp410",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
- .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
.channel = OMAP_DSS_CHANNEL_LCD2,
};
@@ -179,45 +176,12 @@
.pwrgood_gpio = 45,
};
-static void sdp4430_picodlp_init(void)
-{
- int r;
- const struct gpio picodlp_gpios[] = {
- {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
- "DLP POWER ON"},
- {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
- "DLP EMU DONE"},
- {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
- "DLP PWRGOOD"},
- };
-
- r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
- if (r)
- pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
-}
-
-static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
-{
- gpio_set_value(DISPLAY_SEL_GPIO, 0);
- gpio_set_value(DLP_POWER_ON_GPIO, 1);
-
- return 0;
-}
-
-static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
-{
- gpio_set_value(DLP_POWER_ON_GPIO, 0);
- gpio_set_value(DISPLAY_SEL_GPIO, 1);
-}
-
static struct omap_dss_device sdp4430_picodlp_device = {
.name = "picodlp",
.driver_name = "picodlp_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.channel = OMAP_DSS_CHANNEL_LCD2,
- .platform_enable = sdp4430_panel_enable_picodlp,
- .platform_disable = sdp4430_panel_disable_picodlp,
.data = &sdp4430_picodlp_pdata,
};
@@ -234,17 +198,26 @@
.default_device = &sdp4430_lcd_device,
};
+/*
+ * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO.
+ * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails
+ * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
+ * selected by default
+ */
void __init omap_4430sdp_display_init(void)
{
int r;
- /* Enable LCD2 by default (instead of Pico DLP) */
r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
"display_sel");
if (r)
pr_err("%s: Could not get display_sel GPIO\n", __func__);
- sdp4430_picodlp_init();
+ r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+ "DLP POWER ON");
+ if (r)
+ pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
+
omap_display_init(&sdp4430_dss_data);
/*
* OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
@@ -264,12 +237,15 @@
{
int r;
- /* Enable LCD2 by default (instead of Pico DLP) */
r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
"display_sel");
if (r)
pr_err("%s: Could not get display_sel GPIO\n", __func__);
- sdp4430_picodlp_init();
+ r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+ "DLP POWER ON");
+ if (r)
+ pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
+
omap_display_init(&sdp4430_dss_data);
}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2bef5a7..e210fa8 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -55,6 +55,12 @@
#include "prm44xx.h"
/*
+ * omap_clk_init: points to a function that does the SoC-specific
+ * clock initializations
+ */
+int (*omap_clk_init)(void);
+
+/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
@@ -406,7 +412,7 @@
omap242x_clockdomains_init();
omap2420_hwmod_init();
omap_hwmod_init_postsetup();
- omap2420_clk_init();
+ omap_clk_init = omap2420_clk_init;
}
void __init omap2420_init_late(void)
@@ -436,7 +442,7 @@
omap243x_clockdomains_init();
omap2430_hwmod_init();
omap_hwmod_init_postsetup();
- omap2430_clk_init();
+ omap_clk_init = omap2430_clk_init;
}
void __init omap2430_init_late(void)
@@ -471,7 +477,7 @@
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
- omap3xxx_clk_init();
+ omap_clk_init = omap3xxx_clk_init;
}
void __init omap3430_init_early(void)
@@ -509,7 +515,7 @@
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
- omap3xxx_clk_init();
+ omap_clk_init = omap3xxx_clk_init;
}
void __init omap3_init_late(void)
@@ -577,7 +583,7 @@
am33xx_clockdomains_init();
am33xx_hwmod_init();
omap_hwmod_init_postsetup();
- am33xx_clk_init();
+ omap_clk_init = am33xx_clk_init;
}
#endif
@@ -602,7 +608,7 @@
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
omap_hwmod_init_postsetup();
- omap4xxx_clk_init();
+ omap_clk_init = omap4xxx_clk_init;
}
void __init omap4430_init_late(void)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 2520d46..3f50f68 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1364,7 +1364,9 @@
}
if (sf & SYSC_HAS_MIDLEMODE) {
- if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+ if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
idlemode = HWMOD_IDLEMODE_NO;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
@@ -1436,7 +1438,8 @@
}
if (sf & SYSC_HAS_MIDLEMODE) {
- if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+ if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
+ (oh->flags & HWMOD_FORCE_MSTANDBY)) {
idlemode = HWMOD_IDLEMODE_FORCE;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 28f4dea..fe59629 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -427,8 +427,8 @@
*
* HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
* of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- * of standby, rather than relying on module smart-standby
+ * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
+ * out of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
* SDRAM controller, etc. XXX probably belongs outside the main hwmod file
* XXX Should be HWMOD_SETUP_NO_RESET
@@ -459,6 +459,10 @@
* correctly, or this is being abused to deal with some PM latency
* issues -- but we're currently suffering from a shortage of
* folks who are able to track these issues down properly.
+ * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
+ * is kept in force-standby mode. Failing to do so causes PM problems
+ * with musb on OMAP3630 at least. Note that musb has a dedicated register
+ * to control MSTANDBY signal when MIDLEMODE is set to force-standby.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -471,6 +475,7 @@
#define HWMOD_16BIT_REG (1 << 8)
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
#define HWMOD_BLOCK_WFI (1 << 10)
+#define HWMOD_FORCE_MSTANDBY (1 << 11)
/*
* omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index ac7e03e..5112d04 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1707,9 +1707,14 @@
* Erratum ID: i479 idle_req / idle_ack mechanism potentially
* broken when autoidle is enabled
* workaround is to disable the autoidle bit at module level.
+ *
+ * Enabling the device in any other MIDLEMODE setting but force-idle
+ * causes core_pwrdm not enter idle states at least on OMAP3630.
+ * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
+ * signal when MIDLEMODE is set to force-idle.
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
- | HWMOD_SWSUP_MSTANDBY,
+ | HWMOD_FORCE_MSTANDBY,
};
/* usb_otg_hs */
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 0e47d2e..9e05765 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2714,6 +2714,10 @@
{ }
};
+static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
+ { .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
+};
+
/* ocp2scp_usb_phy */
static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.name = "ocp2scp_usb_phy",
@@ -2728,6 +2732,8 @@
},
},
.dev_attr = ocp2scp_dev_attr,
+ .opt_clks = ocp2scp_usb_phy_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
};
/*
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 31109cb..fdf1c03 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -548,6 +548,8 @@
clksrc_nr, clksrc_src, clksrc_prop) \
void __init omap##name##_gptimer_timer_init(void) \
{ \
+ if (omap_clk_init) \
+ omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \
@@ -558,6 +560,8 @@
clksrc_nr, clksrc_src, clksrc_prop) \
void __init omap##name##_sync32k_timer_init(void) \
{ \
+ if (omap_clk_init) \
+ omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
/* Enable the use of clocksource="gp_timer" kernel parameter */ \
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
new file mode 100644
index 0000000..5412aeb
--- /dev/null
+++ b/arch/arm/mach-spear/Kconfig
@@ -0,0 +1,103 @@
+#
+# SPEAr Platform configuration file
+#
+
+menuconfig PLAT_SPEAR
+ bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
+ default PLAT_SPEAR_SINGLE
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+
+if PLAT_SPEAR
+
+config ARCH_SPEAR13XX
+ bool "ST SPEAr13xx"
+ depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
+ select ARCH_HAS_CPUFREQ
+ select ARM_GIC
+ select CPU_V7
+ select GPIO_SPEAR_SPICS
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
+ select PINCTRL
+ select USE_OF
+ help
+ Supports for ARM's SPEAR13XX family
+
+if ARCH_SPEAR13XX
+
+config MACH_SPEAR1310
+ bool "SPEAr1310 Machine support with Device Tree"
+ select PINCTRL_SPEAR1310
+ help
+ Supports ST SPEAr1310 machine configured via the device-tree
+
+config MACH_SPEAR1340
+ bool "SPEAr1340 Machine support with Device Tree"
+ select PINCTRL_SPEAR1340
+ help
+ Supports ST SPEAr1340 machine configured via the device-tree
+
+endif #ARCH_SPEAR13XX
+
+config ARCH_SPEAR3XX
+ bool "ST SPEAr3xx"
+ depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+ depends on !ARCH_SPEAR13XX
+ select ARM_VIC
+ select CPU_ARM926T
+ select PINCTRL
+ select USE_OF
+ help
+ Supports for ARM's SPEAR3XX family
+
+if ARCH_SPEAR3XX
+
+config MACH_SPEAR300
+ bool "SPEAr300 Machine support with Device Tree"
+ select PINCTRL_SPEAR300
+ help
+ Supports ST SPEAr300 machine configured via the device-tree
+
+config MACH_SPEAR310
+ bool "SPEAr310 Machine support with Device Tree"
+ select PINCTRL_SPEAR310
+ help
+ Supports ST SPEAr310 machine configured via the device-tree
+
+config MACH_SPEAR320
+ bool "SPEAr320 Machine support with Device Tree"
+ select PINCTRL_SPEAR320
+ help
+ Supports ST SPEAr320 machine configured via the device-tree
+
+endif
+
+config ARCH_SPEAR6XX
+ bool "ST SPEAr6XX"
+ depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
+ depends on !ARCH_SPEAR13XX
+ select ARM_VIC
+ select CPU_ARM926T
+ help
+ Supports for ARM's SPEAR6XX family
+
+config MACH_SPEAR600
+ def_bool y
+ depends on ARCH_SPEAR6XX
+ select USE_OF
+ help
+ Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig"
+
+config ARCH_SPEAR_AUTO
+ def_bool PLAT_SPEAR_SINGLE
+ depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
+ select ARCH_SPEAR3XX
+
+endif
+
diff --git a/arch/arm/mach-spear/Makefile b/arch/arm/mach-spear/Makefile
new file mode 100644
index 0000000..8aaf724
--- /dev/null
+++ b/arch/arm/mach-spear/Makefile
@@ -0,0 +1,24 @@
+#
+# SPEAr Platform specific Makefile
+#
+
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+
+# Common support
+obj-y := restart.o time.o
+
+smp-$(CONFIG_SMP) += headsmp.o platsmp.o
+smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+
+obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o $(smp-y)
+obj-$(CONFIG_MACH_SPEAR1310) += spear1310.o
+obj-$(CONFIG_MACH_SPEAR1340) += spear1340.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o
+obj-$(CONFIG_ARCH_SPEAR3XX) += pl080.o
+obj-$(CONFIG_MACH_SPEAR300) += spear300.o
+obj-$(CONFIG_MACH_SPEAR310) += spear310.o
+obj-$(CONFIG_MACH_SPEAR320) += spear320.o
+
+obj-$(CONFIG_ARCH_SPEAR6XX) += spear6xx.o
+obj-$(CONFIG_ARCH_SPEAR6XX) += pl080.o
diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear/Makefile.boot
similarity index 100%
rename from arch/arm/mach-spear3xx/Makefile.boot
rename to arch/arm/mach-spear/Makefile.boot
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
new file mode 100644
index 0000000..a9fd453
--- /dev/null
+++ b/arch/arm/mach-spear/generic.h
@@ -0,0 +1,54 @@
+/*
+ * spear machine family generic header file
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Rajeev Kumar <rajeev-dlh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <linux/dmaengine.h>
+#include <linux/amba/pl08x.h>
+#include <linux/init.h>
+#include <asm/mach/time.h>
+
+extern void spear13xx_timer_init(void);
+extern void spear3xx_timer_init(void);
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
+
+void __init spear_setup_of_timer(void);
+void __init spear3xx_clk_init(void __iomem *misc_base,
+ void __iomem *soc_config_base);
+void __init spear3xx_map_io(void);
+void __init spear3xx_dt_init_irq(void);
+void __init spear6xx_clk_init(void __iomem *misc_base);
+void __init spear13xx_map_io(void);
+void __init spear13xx_l2x0_init(void);
+
+void spear_restart(char, const char *);
+
+void spear13xx_secondary_startup(void);
+void __cpuinit spear13xx_cpu_die(unsigned int cpu);
+
+extern struct smp_operations spear13xx_smp_ops;
+
+#ifdef CONFIG_MACH_SPEAR1310
+void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base);
+#else
+static inline void spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base) {}
+#endif
+
+#ifdef CONFIG_MACH_SPEAR1340
+void __init spear1340_clk_init(void __iomem *misc_base);
+#else
+static inline void spear1340_clk_init(void __iomem *misc_base) {}
+#endif
+
+#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear13xx/headsmp.S b/arch/arm/mach-spear/headsmp.S
similarity index 100%
rename from arch/arm/mach-spear13xx/headsmp.S
rename to arch/arm/mach-spear/headsmp.S
diff --git a/arch/arm/mach-spear13xx/hotplug.c b/arch/arm/mach-spear/hotplug.c
similarity index 100%
rename from arch/arm/mach-spear13xx/hotplug.c
rename to arch/arm/mach-spear/hotplug.c
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/mach-spear/include/mach/debug-macro.S
similarity index 100%
rename from arch/arm/plat-spear/include/plat/debug-macro.S
rename to arch/arm/mach-spear/include/mach/debug-macro.S
diff --git a/arch/arm/mach-spear/include/mach/irqs.h b/arch/arm/mach-spear/include/mach/irqs.h
new file mode 100644
index 0000000..92da0a8
--- /dev/null
+++ b/arch/arm/mach-spear/include/mach/irqs.h
@@ -0,0 +1,35 @@
+/*
+ * IRQ helper macros for spear machine family
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Rajeev Kumar <rajeev-dlh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#ifdef CONFIG_ARCH_SPEAR3XX
+#define NR_IRQS 256
+#endif
+
+#ifdef CONFIG_ARCH_SPEAR6XX
+/* IRQ definitions */
+/* VIC 1 */
+#define IRQ_VIC_END 64
+
+/* GPIO pins virtual irqs */
+#define VIRTUAL_IRQS 24
+#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS)
+#endif
+
+#ifdef CONFIG_ARCH_SPEAR13XX
+#define IRQ_GIC_END 160
+#define NR_IRQS IRQ_GIC_END
+#endif
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear/include/mach/misc_regs.h
similarity index 90%
rename from arch/arm/mach-spear3xx/include/mach/misc_regs.h
rename to arch/arm/mach-spear/include/mach/misc_regs.h
index 6309bf6..935639c 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear/include/mach/misc_regs.h
@@ -16,7 +16,7 @@
#include <mach/spear.h>
-#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
+#define MISC_BASE (VA_SPEAR_ICM3_MISC_REG_BASE)
#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
new file mode 100644
index 0000000..cf3a536
--- /dev/null
+++ b/arch/arm/mach-spear/include/mach/spear.h
@@ -0,0 +1,93 @@
+/*
+ * SPEAr3xx/6xx Machine family specific definition
+ *
+ * Copyright (C) 2009,2012 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR_H
+#define __MACH_SPEAR_H
+
+#include <asm/memory.h>
+
+#if defined(CONFIG_ARCH_SPEAR3XX) || defined (CONFIG_ARCH_SPEAR6XX)
+
+/* ICM1 - Low speed connection */
+#define SPEAR_ICM1_2_BASE UL(0xD0000000)
+#define VA_SPEAR_ICM1_2_BASE IOMEM(0xFD000000)
+#define SPEAR_ICM1_UART_BASE UL(0xD0000000)
+#define VA_SPEAR_ICM1_UART_BASE (VA_SPEAR_ICM1_2_BASE - SPEAR_ICM1_2_BASE + SPEAR_ICM1_UART_BASE)
+#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
+
+/* ML-1, 2 - Multi Layer CPU Subsystem */
+#define SPEAR_ICM3_ML1_2_BASE UL(0xF0000000)
+#define VA_SPEAR6XX_ML_CPU_BASE IOMEM(0xF0000000)
+
+/* ICM3 - Basic Subsystem */
+#define SPEAR_ICM3_SMI_CTRL_BASE UL(0xFC000000)
+#define VA_SPEAR_ICM3_SMI_CTRL_BASE IOMEM(0xFC000000)
+#define SPEAR_ICM3_DMA_BASE UL(0xFC400000)
+#define SPEAR_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
+#define VA_SPEAR_ICM3_SYS_CTRL_BASE (VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_SYS_CTRL_BASE)
+#define SPEAR_ICM3_MISC_REG_BASE UL(0xFCA80000)
+#define VA_SPEAR_ICM3_MISC_REG_BASE (VA_SPEAR_ICM3_SMI_CTRL_BASE - SPEAR_ICM3_SMI_CTRL_BASE + SPEAR_ICM3_MISC_REG_BASE)
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE SPEAR_ICM1_UART_BASE
+#define VA_SPEAR_DBG_UART_BASE VA_SPEAR_ICM1_UART_BASE
+
+/* Sysctl base for spear platform */
+#define SPEAR_SYS_CTRL_BASE SPEAR_ICM3_SYS_CTRL_BASE
+#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR_ICM3_SYS_CTRL_BASE
+#endif /* SPEAR3xx || SPEAR6XX */
+
+/* SPEAr320 Macros */
+#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
+#define VA_SPEAR320_SOC_CONFIG_BASE IOMEM(0xFE000000)
+
+#ifdef CONFIG_ARCH_SPEAR13XX
+
+#define PERIP_GRP2_BASE UL(0xB3000000)
+#define VA_PERIP_GRP2_BASE IOMEM(0xFE000000)
+#define MCIF_SDHCI_BASE UL(0xB3000000)
+#define SYSRAM0_BASE UL(0xB3800000)
+#define VA_SYSRAM0_BASE IOMEM(0xFE800000)
+#define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600)
+
+#define PERIP_GRP1_BASE UL(0xE0000000)
+#define VA_PERIP_GRP1_BASE IOMEM(0xFD000000)
+#define UART_BASE UL(0xE0000000)
+#define VA_UART_BASE IOMEM(0xFD000000)
+#define SSP_BASE UL(0xE0100000)
+#define MISC_BASE UL(0xE0700000)
+#define VA_MISC_BASE IOMEM(0xFD700000)
+
+#define A9SM_AND_MPMC_BASE UL(0xEC000000)
+#define VA_A9SM_AND_MPMC_BASE IOMEM(0xFC000000)
+
+#define SPEAR1310_RAS_BASE UL(0xD8400000)
+#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000))
+
+/* A9SM peripheral offsets */
+#define A9SM_PERIP_BASE UL(0xEC800000)
+#define VA_A9SM_PERIP_BASE IOMEM(0xFC800000)
+#define VA_SCU_BASE (VA_A9SM_PERIP_BASE + 0x00)
+
+#define L2CC_BASE UL(0xED000000)
+#define VA_L2CC_BASE IOMEM(UL(0xFB000000))
+
+/* others */
+#define MCIF_CF_BASE UL(0xB2800000)
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE UART_BASE
+#define VA_SPEAR_DBG_UART_BASE VA_UART_BASE
+
+#endif /* SPEAR13XX */
+
+#endif /* __MACH_SPEAR_H */
diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/mach-spear/include/mach/timex.h
similarity index 100%
rename from arch/arm/plat-spear/include/plat/timex.h
rename to arch/arm/mach-spear/include/mach/timex.h
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/mach-spear/include/mach/uncompress.h
similarity index 100%
rename from arch/arm/plat-spear/include/plat/uncompress.h
rename to arch/arm/mach-spear/include/mach/uncompress.h
diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/mach-spear/pl080.c
similarity index 100%
rename from arch/arm/plat-spear/pl080.c
rename to arch/arm/mach-spear/pl080.c
diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/mach-spear/pl080.h
similarity index 100%
rename from arch/arm/plat-spear/include/plat/pl080.h
rename to arch/arm/mach-spear/pl080.h
diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear/platsmp.c
similarity index 98%
rename from arch/arm/mach-spear13xx/platsmp.c
rename to arch/arm/mach-spear/platsmp.c
index af4ade6..927979e 100644
--- a/arch/arm/mach-spear13xx/platsmp.c
+++ b/arch/arm/mach-spear/platsmp.c
@@ -19,7 +19,7 @@
#include <asm/cacheflush.h>
#include <asm/smp_scu.h>
#include <mach/spear.h>
-#include <mach/generic.h>
+#include "generic.h"
static DEFINE_SPINLOCK(boot_lock);
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/mach-spear/restart.c
similarity index 89%
rename from arch/arm/plat-spear/restart.c
rename to arch/arm/mach-spear/restart.c
index 7d4616d5..2b44500 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/mach-spear/restart.c
@@ -14,7 +14,7 @@
#include <linux/amba/sp810.h>
#include <asm/system_misc.h>
#include <mach/spear.h>
-#include <mach/generic.h>
+#include "generic.h"
#define SPEAR13XX_SYS_SW_RES (VA_MISC_BASE + 0x204)
void spear_restart(char mode, const char *cmd)
@@ -26,7 +26,8 @@
/* hardware reset, Use on-chip reset capability */
#ifdef CONFIG_ARCH_SPEAR13XX
writel_relaxed(0x01, SPEAR13XX_SYS_SW_RES);
-#else
+#endif
+#if defined(CONFIG_ARCH_SPEAR3XX) || defined(CONFIG_ARCH_SPEAR6XX)
sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
#endif
}
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
new file mode 100644
index 0000000..9eaac2c
--- /dev/null
+++ b/arch/arm/mach-spear/spear1310.c
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-spear13xx/spear1310.c
+ *
+ * SPEAr1310 machine source file
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr1310: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <linux/pata_arasan_cf_data.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include "generic.h"
+#include <mach/spear.h>
+
+/* Base addresses */
+#define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000)
+#define VA_SPEAR1310_RAS_GRP1_BASE UL(0xFA000000)
+
+static void __init spear1310_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const spear1310_dt_board_compat[] = {
+ "st,spear1310",
+ "st,spear1310-evb",
+ NULL,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL VIRTUAL
+ * 0xD8000000 0xFA000000
+ */
+struct map_desc spear1310_io_desc[] __initdata = {
+ {
+ .virtual = VA_SPEAR1310_RAS_GRP1_BASE,
+ .pfn = __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ },
+};
+
+static void __init spear1310_map_io(void)
+{
+ iotable_init(spear1310_io_desc, ARRAY_SIZE(spear1310_io_desc));
+ spear13xx_map_io();
+}
+
+DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
+ .smp = smp_ops(spear13xx_smp_ops),
+ .map_io = spear1310_map_io,
+ .init_irq = irqchip_init,
+ .init_time = spear13xx_timer_init,
+ .init_machine = spear1310_dt_init,
+ .restart = spear_restart,
+ .dt_compat = spear1310_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear/spear1340.c
similarity index 82%
rename from arch/arm/mach-spear13xx/spear1340.c
rename to arch/arm/mach-spear/spear1340.c
index 9a28beb..a04a7fe 100644
--- a/arch/arm/mach-spear13xx/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -16,17 +16,16 @@
#include <linux/ahci_platform.h>
#include <linux/amba/serial.h>
#include <linux/delay.h>
-#include <linux/dw_dmac.h>
#include <linux/of_platform.h>
#include <linux/irqchip.h>
#include <asm/mach/arch.h>
-#include <mach/dma.h>
-#include <mach/generic.h>
+#include "generic.h"
#include <mach/spear.h>
+/* FIXME: Move SATA PHY code into a standalone driver */
+
/* Base addresses */
#define SPEAR1340_SATA_BASE UL(0xB1000000)
-#define SPEAR1340_UART1_BASE UL(0xB4100000)
/* Power Management Registers */
#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
@@ -78,28 +77,6 @@
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
-static struct dw_dma_slave uart1_dma_param[] = {
- {
- /* Tx */
- .cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
- .cfg_lo = 0,
- .src_master = DMA_MASTER_MEMORY,
- .dst_master = SPEAR1340_DMA_MASTER_UART1,
- }, {
- /* Rx */
- .cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
- .cfg_lo = 0,
- .src_master = SPEAR1340_DMA_MASTER_UART1,
- .dst_master = DMA_MASTER_MEMORY,
- }
-};
-
-static struct amba_pl011_data uart1_data = {
- .dma_filter = dw_dma_filter,
- .dma_tx_param = &uart1_dma_param[0],
- .dma_rx_param = &uart1_dma_param[1],
-};
-
/* SATA device registration */
static int sata_miphy_init(struct device *dev, void __iomem *addr)
{
@@ -158,14 +135,8 @@
/* Add SPEAr1340 auxdata to pass platform data */
static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
- OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
- OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
- OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
-
OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
&sata_pdata),
- OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
{}
};
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
similarity index 69%
rename from arch/arm/mach-spear13xx/spear13xx.c
rename to arch/arm/mach-spear/spear13xx.c
index 25a1019..3621599 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -16,69 +16,12 @@
#include <linux/amba/pl022.h>
#include <linux/clk.h>
#include <linux/clocksource.h>
-#include <linux/dw_dmac.h>
#include <linux/err.h>
#include <linux/of.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
-#include <mach/dma.h>
-#include <mach/generic.h>
#include <mach/spear.h>
-
-/* common dw_dma filter routine to be used by peripherals */
-bool dw_dma_filter(struct dma_chan *chan, void *slave)
-{
- struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
-
- if (chan->device->dev == dws->dma_dev) {
- chan->private = slave;
- return true;
- } else {
- return false;
- }
-}
-
-/* ssp device registration */
-static struct dw_dma_slave ssp_dma_param[] = {
- {
- /* Tx */
- .cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
- .cfg_lo = 0,
- .src_master = DMA_MASTER_MEMORY,
- .dst_master = DMA_MASTER_SSP0,
- }, {
- /* Rx */
- .cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
- .cfg_lo = 0,
- .src_master = DMA_MASTER_SSP0,
- .dst_master = DMA_MASTER_MEMORY,
- }
-};
-
-struct pl022_ssp_controller pl022_plat_data = {
- .enable_dma = 1,
- .dma_filter = dw_dma_filter,
- .dma_rx_param = &ssp_dma_param[1],
- .dma_tx_param = &ssp_dma_param[0],
-};
-
-/* CF device registration */
-struct dw_dma_slave cf_dma_priv = {
- .cfg_hi = 0,
- .cfg_lo = 0,
- .src_master = 0,
- .dst_master = 0,
-};
-
-/* dmac device registeration */
-struct dw_dma_platform_data dmac_plat_data = {
- .nr_channels = 8,
- .chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
- .chan_priority = CHAN_PRIORITY_DESCENDING,
- .block_size = 4095U,
- .nr_masters = 2,
- .data_width = { 3, 3, 0, 0 },
-};
+#include "generic.h"
void __init spear13xx_l2x0_init(void)
{
@@ -145,9 +88,9 @@
static void __init spear13xx_clk_init(void)
{
if (of_machine_is_compatible("st,spear1310"))
- spear1310_clk_init();
+ spear1310_clk_init(VA_MISC_BASE, VA_SPEAR1310_RAS_BASE);
else if (of_machine_is_compatible("st,spear1340"))
- spear1340_clk_init();
+ spear1340_clk_init(VA_MISC_BASE);
else
pr_err("%s: Unknown machine\n", __func__);
}
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear/spear300.c
similarity index 97%
rename from arch/arm/mach-spear3xx/spear300.c
rename to arch/arm/mach-spear/spear300.c
index bbc9b7e..bac56e8 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear/spear300.c
@@ -17,7 +17,7 @@
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
-#include <mach/generic.h>
+#include "generic.h"
#include <mach/spear.h>
/* DMAC platform data's slave info */
@@ -185,7 +185,7 @@
static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
- OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+ OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
&pl080_plat_data),
{}
};
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear/spear310.c
similarity index 98%
rename from arch/arm/mach-spear3xx/spear310.c
rename to arch/arm/mach-spear/spear310.c
index c13a434..6ffbc63 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear/spear310.c
@@ -18,7 +18,7 @@
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
-#include <mach/generic.h>
+#include "generic.h"
#include <mach/spear.h>
#define SPEAR310_UART1_BASE UL(0xB2000000)
@@ -217,7 +217,7 @@
static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
- OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+ OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
&pl080_plat_data),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
&spear310_uart_data[0]),
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear/spear320.c
similarity index 97%
rename from arch/arm/mach-spear3xx/spear320.c
rename to arch/arm/mach-spear/spear320.c
index e1c7707..6eb3eec 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear/spear320.c
@@ -19,7 +19,8 @@
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
-#include <mach/generic.h>
+#include <asm/mach/map.h>
+#include "generic.h"
#include <mach/spear.h>
#define SPEAR320_UART1_BASE UL(0xA3000000)
@@ -222,7 +223,7 @@
static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
- OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+ OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
&pl080_plat_data),
OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
&spear320_ssp_data[0]),
@@ -253,7 +254,7 @@
struct map_desc spear320_io_desc[] __initdata = {
{
- .virtual = VA_SPEAR320_SOC_CONFIG_BASE,
+ .virtual = (unsigned long)VA_SPEAR320_SOC_CONFIG_BASE,
.pfn = __phys_to_pfn(SPEAR320_SOC_CONFIG_BASE),
.length = SZ_16M,
.type = MT_DEVICE
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear/spear3xx.c
similarity index 87%
rename from arch/arm/mach-spear3xx/spear3xx.c
rename to arch/arm/mach-spear/spear3xx.c
index d2b3937..0227c97 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear/spear3xx.c
@@ -15,10 +15,13 @@
#include <linux/amba/pl022.h>
#include <linux/amba/pl080.h>
+#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/pl080.h>
-#include <mach/generic.h>
+#include <asm/mach/map.h>
+#include "pl080.h"
+#include "generic.h"
#include <mach/spear.h>
+#include <mach/misc_regs.h>
/* ssp device registration */
struct pl022_ssp_controller pl022_plat_data = {
@@ -65,13 +68,13 @@
*/
struct map_desc spear3xx_io_desc[] __initdata = {
{
- .virtual = VA_SPEAR3XX_ICM1_2_BASE,
- .pfn = __phys_to_pfn(SPEAR3XX_ICM1_2_BASE),
+ .virtual = (unsigned long)VA_SPEAR_ICM1_2_BASE,
+ .pfn = __phys_to_pfn(SPEAR_ICM1_2_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
- .virtual = VA_SPEAR3XX_ICM3_SMI_CTRL_BASE,
- .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE),
+ .virtual = (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE,
+ .pfn = __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE),
.length = SZ_16M,
.type = MT_DEVICE
},
@@ -88,7 +91,7 @@
char pclk_name[] = "pll3_clk";
struct clk *gpt_clk, *pclk;
- spear3xx_clk_init();
+ spear3xx_clk_init(MISC_BASE, VA_SPEAR320_SOC_CONFIG_BASE);
/* get the system timer clock */
gpt_clk = clk_get_sys("gpt0", NULL);
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear/spear6xx.c
similarity index 93%
rename from arch/arm/mach-spear6xx/spear6xx.c
rename to arch/arm/mach-spear/spear6xx.c
index 8904d8a..ec8eefb 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear/spear6xx.c
@@ -24,9 +24,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <plat/pl080.h>
-#include <mach/generic.h>
+#include "pl080.h"
+#include "generic.h"
#include <mach/spear.h>
+#include <mach/misc_regs.h>
/* dmac device registration */
static struct pl08x_channel_data spear600_dma_info[] = {
@@ -321,7 +322,7 @@
},
};
-struct pl08x_platform_data pl080_plat_data = {
+static struct pl08x_platform_data spear6xx_pl080_plat_data = {
.memcpy_channel = {
.bus_id = "memcpy",
.cctl_memcpy =
@@ -350,18 +351,18 @@
*/
struct map_desc spear6xx_io_desc[] __initdata = {
{
- .virtual = VA_SPEAR6XX_ML_CPU_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_ML_CPU_BASE),
+ .virtual = (unsigned long)VA_SPEAR6XX_ML_CPU_BASE,
+ .pfn = __phys_to_pfn(SPEAR_ICM3_ML1_2_BASE),
.length = 2 * SZ_16M,
.type = MT_DEVICE
}, {
- .virtual = VA_SPEAR6XX_ICM1_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_ICM1_BASE),
+ .virtual = (unsigned long)VA_SPEAR_ICM1_2_BASE,
+ .pfn = __phys_to_pfn(SPEAR_ICM1_2_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}, {
- .virtual = VA_SPEAR6XX_ICM3_SMI_CTRL_BASE,
- .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE),
+ .virtual = (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE,
+ .pfn = __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE),
.length = SZ_16M,
.type = MT_DEVICE
},
@@ -378,7 +379,7 @@
char pclk_name[] = "pll3_clk";
struct clk *gpt_clk, *pclk;
- spear6xx_clk_init();
+ spear6xx_clk_init(MISC_BASE);
/* get the system timer clock */
gpt_clk = clk_get_sys("gpt0", NULL);
@@ -404,8 +405,8 @@
/* Add auxdata to pass platform data */
struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL,
- &pl080_plat_data),
+ OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL,
+ &spear6xx_pl080_plat_data),
{}
};
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/mach-spear/time.c
similarity index 99%
rename from arch/arm/plat-spear/time.c
rename to arch/arm/mach-spear/time.c
index bd5c53c..d449673 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@@ -23,7 +23,7 @@
#include <linux/time.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
-#include <mach/generic.h>
+#include "generic.h"
/*
* We would use TIMER0 and TIMER1 as clockevent and clocksource.
diff --git a/arch/arm/mach-spear13xx/Kconfig b/arch/arm/mach-spear13xx/Kconfig
deleted file mode 100644
index eaadc66..0000000
--- a/arch/arm/mach-spear13xx/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# SPEAr13XX Machine configuration file
-#
-
-if ARCH_SPEAR13XX
-
-menu "SPEAr13xx Implementations"
-config MACH_SPEAR1310
- bool "SPEAr1310 Machine support with Device Tree"
- select PINCTRL_SPEAR1310
- help
- Supports ST SPEAr1310 machine configured via the device-tree
-
-config MACH_SPEAR1340
- bool "SPEAr1340 Machine support with Device Tree"
- select PINCTRL_SPEAR1340
- help
- Supports ST SPEAr1340 machine configured via the device-tree
-endmenu
-endif #ARCH_SPEAR13XX
diff --git a/arch/arm/mach-spear13xx/Makefile b/arch/arm/mach-spear13xx/Makefile
deleted file mode 100644
index 3435ea7..0000000
--- a/arch/arm/mach-spear13xx/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for SPEAr13XX machine series
-#
-
-obj-$(CONFIG_SMP) += headsmp.o platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-
-obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o
-obj-$(CONFIG_MACH_SPEAR1310) += spear1310.o
-obj-$(CONFIG_MACH_SPEAR1340) += spear1340.o
diff --git a/arch/arm/mach-spear13xx/Makefile.boot b/arch/arm/mach-spear13xx/Makefile.boot
deleted file mode 100644
index 4674a4c..0000000
--- a/arch/arm/mach-spear13xx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S
deleted file mode 100644
index 9e3ae6b..0000000
--- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/include/mach/debug-macro.S
- *
- * Debugging macro include header spear13xx machine family
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h
deleted file mode 100644
index d50bdb6..0000000
--- a/arch/arm/mach-spear13xx/include/mach/dma.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/include/mach/dma.h
- *
- * DMA information for SPEAr13xx machine family
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* request id of all the peripherals */
-enum dma_master_info {
- /* Accessible from only one master */
- DMA_MASTER_MCIF = 0,
- DMA_MASTER_FSMC = 1,
- /* Accessible from both 0 & 1 */
- DMA_MASTER_MEMORY = 0,
- DMA_MASTER_ADC = 0,
- DMA_MASTER_UART0 = 0,
- DMA_MASTER_SSP0 = 0,
- DMA_MASTER_I2C0 = 0,
-
-#ifdef CONFIG_MACH_SPEAR1310
- /* Accessible from only one master */
- SPEAR1310_DMA_MASTER_JPEG = 1,
-
- /* Accessible from both 0 & 1 */
- SPEAR1310_DMA_MASTER_I2S = 0,
- SPEAR1310_DMA_MASTER_UART1 = 0,
- SPEAR1310_DMA_MASTER_UART2 = 0,
- SPEAR1310_DMA_MASTER_UART3 = 0,
- SPEAR1310_DMA_MASTER_UART4 = 0,
- SPEAR1310_DMA_MASTER_UART5 = 0,
- SPEAR1310_DMA_MASTER_I2C1 = 0,
- SPEAR1310_DMA_MASTER_I2C2 = 0,
- SPEAR1310_DMA_MASTER_I2C3 = 0,
- SPEAR1310_DMA_MASTER_I2C4 = 0,
- SPEAR1310_DMA_MASTER_I2C5 = 0,
- SPEAR1310_DMA_MASTER_I2C6 = 0,
- SPEAR1310_DMA_MASTER_I2C7 = 0,
- SPEAR1310_DMA_MASTER_SSP1 = 0,
-#endif
-
-#ifdef CONFIG_MACH_SPEAR1340
- /* Accessible from only one master */
- SPEAR1340_DMA_MASTER_I2S_PLAY = 1,
- SPEAR1340_DMA_MASTER_I2S_REC = 1,
- SPEAR1340_DMA_MASTER_I2C1 = 1,
- SPEAR1340_DMA_MASTER_UART1 = 1,
-
- /* following are accessible from both master 0 & 1 */
- SPEAR1340_DMA_MASTER_SPDIF = 0,
- SPEAR1340_DMA_MASTER_CAM = 1,
- SPEAR1340_DMA_MASTER_VIDEO_IN = 0,
- SPEAR1340_DMA_MASTER_MALI = 0,
-#endif
-};
-
-enum request_id {
- DMA_REQ_ADC = 0,
- DMA_REQ_SSP0_TX = 4,
- DMA_REQ_SSP0_RX = 5,
- DMA_REQ_UART0_TX = 6,
- DMA_REQ_UART0_RX = 7,
- DMA_REQ_I2C0_TX = 8,
- DMA_REQ_I2C0_RX = 9,
-
-#ifdef CONFIG_MACH_SPEAR1310
- SPEAR1310_DMA_REQ_FROM_JPEG = 2,
- SPEAR1310_DMA_REQ_TO_JPEG = 3,
- SPEAR1310_DMA_REQ_I2S_TX = 10,
- SPEAR1310_DMA_REQ_I2S_RX = 11,
-
- SPEAR1310_DMA_REQ_I2C1_RX = 0,
- SPEAR1310_DMA_REQ_I2C1_TX = 1,
- SPEAR1310_DMA_REQ_I2C2_RX = 2,
- SPEAR1310_DMA_REQ_I2C2_TX = 3,
- SPEAR1310_DMA_REQ_I2C3_RX = 4,
- SPEAR1310_DMA_REQ_I2C3_TX = 5,
- SPEAR1310_DMA_REQ_I2C4_RX = 6,
- SPEAR1310_DMA_REQ_I2C4_TX = 7,
- SPEAR1310_DMA_REQ_I2C5_RX = 8,
- SPEAR1310_DMA_REQ_I2C5_TX = 9,
- SPEAR1310_DMA_REQ_I2C6_RX = 10,
- SPEAR1310_DMA_REQ_I2C6_TX = 11,
- SPEAR1310_DMA_REQ_UART1_RX = 12,
- SPEAR1310_DMA_REQ_UART1_TX = 13,
- SPEAR1310_DMA_REQ_UART2_RX = 14,
- SPEAR1310_DMA_REQ_UART2_TX = 15,
- SPEAR1310_DMA_REQ_UART5_RX = 16,
- SPEAR1310_DMA_REQ_UART5_TX = 17,
- SPEAR1310_DMA_REQ_SSP1_RX = 18,
- SPEAR1310_DMA_REQ_SSP1_TX = 19,
- SPEAR1310_DMA_REQ_I2C7_RX = 20,
- SPEAR1310_DMA_REQ_I2C7_TX = 21,
- SPEAR1310_DMA_REQ_UART3_RX = 28,
- SPEAR1310_DMA_REQ_UART3_TX = 29,
- SPEAR1310_DMA_REQ_UART4_RX = 30,
- SPEAR1310_DMA_REQ_UART4_TX = 31,
-#endif
-
-#ifdef CONFIG_MACH_SPEAR1340
- SPEAR1340_DMA_REQ_SPDIF_TX = 2,
- SPEAR1340_DMA_REQ_SPDIF_RX = 3,
- SPEAR1340_DMA_REQ_I2S_TX = 10,
- SPEAR1340_DMA_REQ_I2S_RX = 11,
- SPEAR1340_DMA_REQ_UART1_TX = 12,
- SPEAR1340_DMA_REQ_UART1_RX = 13,
- SPEAR1340_DMA_REQ_I2C1_TX = 14,
- SPEAR1340_DMA_REQ_I2C1_RX = 15,
- SPEAR1340_DMA_REQ_CAM0_EVEN = 0,
- SPEAR1340_DMA_REQ_CAM0_ODD = 1,
- SPEAR1340_DMA_REQ_CAM1_EVEN = 2,
- SPEAR1340_DMA_REQ_CAM1_ODD = 3,
- SPEAR1340_DMA_REQ_CAM2_EVEN = 4,
- SPEAR1340_DMA_REQ_CAM2_ODD = 5,
- SPEAR1340_DMA_REQ_CAM3_EVEN = 6,
- SPEAR1340_DMA_REQ_CAM3_ODD = 7,
-#endif
-};
-
-#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
deleted file mode 100644
index 633e678..0000000
--- a/arch/arm/mach-spear13xx/include/mach/generic.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/include/mach/generic.h
- *
- * spear13xx machine family generic header file
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GENERIC_H
-#define __MACH_GENERIC_H
-
-#include <linux/dmaengine.h>
-#include <asm/mach/time.h>
-
-/* Add spear13xx structure declarations here */
-extern void spear13xx_timer_init(void);
-extern struct pl022_ssp_controller pl022_plat_data;
-extern struct dw_dma_platform_data dmac_plat_data;
-extern struct dw_dma_slave cf_dma_priv;
-extern struct dw_dma_slave nand_read_dma_priv;
-extern struct dw_dma_slave nand_write_dma_priv;
-
-/* Add spear13xx family function declarations here */
-void __init spear_setup_of_timer(void);
-void __init spear13xx_map_io(void);
-void __init spear13xx_l2x0_init(void);
-bool dw_dma_filter(struct dma_chan *chan, void *slave);
-void spear_restart(char, const char *);
-void spear13xx_secondary_startup(void);
-void __cpuinit spear13xx_cpu_die(unsigned int cpu);
-
-extern struct smp_operations spear13xx_smp_ops;
-
-#ifdef CONFIG_MACH_SPEAR1310
-void __init spear1310_clk_init(void);
-#else
-static inline void spear1310_clk_init(void) {}
-#endif
-
-#ifdef CONFIG_MACH_SPEAR1340
-void __init spear1340_clk_init(void);
-#else
-static inline void spear1340_clk_init(void) {}
-#endif
-
-#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/hardware.h b/arch/arm/mach-spear13xx/include/mach/hardware.h
deleted file mode 100644
index 40a8c178..0000000
--- a/arch/arm/mach-spear13xx/include/mach/hardware.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h
deleted file mode 100644
index 271a62b..0000000
--- a/arch/arm/mach-spear13xx/include/mach/irqs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/include/mach/irqs.h
- *
- * IRQ helper macros for spear13xx machine family
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-#define IRQ_GIC_END 160
-#define NR_IRQS IRQ_GIC_END
-
-#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h
deleted file mode 100644
index 7cfa681..0000000
--- a/arch/arm/mach-spear13xx/include/mach/spear.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/include/mach/spear.h
- *
- * spear13xx Machine family specific definition
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SPEAR13XX_H
-#define __MACH_SPEAR13XX_H
-
-#include <asm/memory.h>
-
-#define PERIP_GRP2_BASE UL(0xB3000000)
-#define VA_PERIP_GRP2_BASE IOMEM(0xFE000000)
-#define MCIF_SDHCI_BASE UL(0xB3000000)
-#define SYSRAM0_BASE UL(0xB3800000)
-#define VA_SYSRAM0_BASE IOMEM(0xFE800000)
-#define SYS_LOCATION (VA_SYSRAM0_BASE + 0x600)
-
-#define PERIP_GRP1_BASE UL(0xE0000000)
-#define VA_PERIP_GRP1_BASE IOMEM(0xFD000000)
-#define UART_BASE UL(0xE0000000)
-#define VA_UART_BASE IOMEM(0xFD000000)
-#define SSP_BASE UL(0xE0100000)
-#define MISC_BASE UL(0xE0700000)
-#define VA_MISC_BASE IOMEM(0xFD700000)
-
-#define A9SM_AND_MPMC_BASE UL(0xEC000000)
-#define VA_A9SM_AND_MPMC_BASE IOMEM(0xFC000000)
-
-/* A9SM peripheral offsets */
-#define A9SM_PERIP_BASE UL(0xEC800000)
-#define VA_A9SM_PERIP_BASE IOMEM(0xFC800000)
-#define VA_SCU_BASE (VA_A9SM_PERIP_BASE + 0x00)
-
-#define L2CC_BASE UL(0xED000000)
-#define VA_L2CC_BASE IOMEM(UL(0xFB000000))
-
-/* others */
-#define DMAC0_BASE UL(0xEA800000)
-#define DMAC1_BASE UL(0xEB000000)
-#define MCIF_CF_BASE UL(0xB2800000)
-
-/* Debug uart for linux, will be used for debug and uncompress messages */
-#define SPEAR_DBG_UART_BASE UART_BASE
-#define VA_SPEAR_DBG_UART_BASE VA_UART_BASE
-
-#endif /* __MACH_SPEAR13XX_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h
deleted file mode 100644
index 3a58b82..0000000
--- a/arch/arm/mach-spear13xx/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/timex.h
- *
- * SPEAr3XX machine family specific timex definitions
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-#include <plat/timex.h>
-
-#endif /* __MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h
deleted file mode 100644
index 70fe72f..0000000
--- a/arch/arm/mach-spear13xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#include <plat/uncompress.h>
-
-#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
deleted file mode 100644
index 56214d1..0000000
--- a/arch/arm/mach-spear13xx/spear1310.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/spear1310.c
- *
- * SPEAr1310 machine source file
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define pr_fmt(fmt) "SPEAr1310: " fmt
-
-#include <linux/amba/pl022.h>
-#include <linux/irqchip.h>
-#include <linux/of_platform.h>
-#include <linux/pata_arasan_cf_data.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
-
-/* Base addresses */
-#define SPEAR1310_SSP1_BASE UL(0x5D400000)
-#define SPEAR1310_SATA0_BASE UL(0xB1000000)
-#define SPEAR1310_SATA1_BASE UL(0xB1800000)
-#define SPEAR1310_SATA2_BASE UL(0xB4000000)
-
-#define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000)
-#define VA_SPEAR1310_RAS_GRP1_BASE UL(0xFA000000)
-#define SPEAR1310_RAS_BASE UL(0xD8400000)
-#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000))
-
-static struct arasan_cf_pdata cf_pdata = {
- .cf_if_clk = CF_IF_CLK_166M,
- .quirk = CF_BROKEN_UDMA,
- .dma_priv = &cf_dma_priv,
-};
-
-/* ssp device registration */
-static struct pl022_ssp_controller ssp1_plat_data = {
- .enable_dma = 0,
-};
-
-/* Add SPEAr1310 auxdata to pass platform data */
-static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_pdata),
- OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
- OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
- OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
-
- OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
- {}
-};
-
-static void __init spear1310_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table,
- spear1310_auxdata_lookup, NULL);
-}
-
-static const char * const spear1310_dt_board_compat[] = {
- "st,spear1310",
- "st,spear1310-evb",
- NULL,
-};
-
-/*
- * Following will create 16MB static virtual/physical mappings
- * PHYSICAL VIRTUAL
- * 0xD8000000 0xFA000000
- */
-struct map_desc spear1310_io_desc[] __initdata = {
- {
- .virtual = VA_SPEAR1310_RAS_GRP1_BASE,
- .pfn = __phys_to_pfn(SPEAR1310_RAS_GRP1_BASE),
- .length = SZ_16M,
- .type = MT_DEVICE
- },
-};
-
-static void __init spear1310_map_io(void)
-{
- iotable_init(spear1310_io_desc, ARRAY_SIZE(spear1310_io_desc));
- spear13xx_map_io();
-}
-
-DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
- .smp = smp_ops(spear13xx_smp_ops),
- .map_io = spear1310_map_io,
- .init_irq = irqchip_init,
- .init_time = spear13xx_timer_init,
- .init_machine = spear1310_dt_init,
- .restart = spear_restart,
- .dt_compat = spear1310_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig
deleted file mode 100644
index 8bd3729..0000000
--- a/arch/arm/mach-spear3xx/Kconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# SPEAr3XX Machine configuration file
-#
-
-if ARCH_SPEAR3XX
-
-menu "SPEAr3xx Implementations"
-config MACH_SPEAR300
- bool "SPEAr300 Machine support with Device Tree"
- select PINCTRL_SPEAR300
- help
- Supports ST SPEAr300 machine configured via the device-tree
-
-config MACH_SPEAR310
- bool "SPEAr310 Machine support with Device Tree"
- select PINCTRL_SPEAR310
- help
- Supports ST SPEAr310 machine configured via the device-tree
-
-config MACH_SPEAR320
- bool "SPEAr320 Machine support with Device Tree"
- select PINCTRL_SPEAR320
- help
- Supports ST SPEAr320 machine configured via the device-tree
-endmenu
-endif #ARCH_SPEAR3XX
diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile
deleted file mode 100644
index 8d12faa..0000000
--- a/arch/arm/mach-spear3xx/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Makefile for SPEAr3XX machine series
-#
-
-# common files
-obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o
-
-# spear300 specific files
-obj-$(CONFIG_MACH_SPEAR300) += spear300.o
-
-# spear310 specific files
-obj-$(CONFIG_MACH_SPEAR310) += spear310.o
-
-# spear320 specific files
-obj-$(CONFIG_MACH_SPEAR320) += spear320.o
diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S
deleted file mode 100644
index 0a6381f..0000000
--- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/debug-macro.S
- *
- * Debugging macro include header spear3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
deleted file mode 100644
index df31079..0000000
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/generic.h
- *
- * SPEAr3XX machine family generic header file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GENERIC_H
-#define __MACH_GENERIC_H
-
-#include <linux/amba/pl08x.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-/* Add spear3xx family device structure declarations here */
-extern void spear3xx_timer_init(void);
-extern struct pl022_ssp_controller pl022_plat_data;
-extern struct pl08x_platform_data pl080_plat_data;
-
-/* Add spear3xx family function declarations here */
-void __init spear_setup_of_timer(void);
-void __init spear3xx_clk_init(void);
-void __init spear3xx_map_io(void);
-
-void spear_restart(char, const char *);
-
-#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
deleted file mode 100644
index 40a8c178..0000000
--- a/arch/arm/mach-spear3xx/include/mach/hardware.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
deleted file mode 100644
index f95e5b2..0000000
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/irqs.h
- *
- * IRQ helper macros for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-#define NR_IRQS 256
-
-#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
deleted file mode 100644
index 8cca951..0000000
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear.h
- *
- * SPEAr3xx Machine family specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SPEAR3XX_H
-#define __MACH_SPEAR3XX_H
-
-#include <asm/memory.h>
-
-/* ICM1 - Low speed connection */
-#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000)
-#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000)
-#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000)
-#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
-
-/* ML1 - Multi Layer CPU Subsystem */
-#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000)
-#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
-
-/* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
-#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
-#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000)
-#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
-#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
-#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
-#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
-
-/* Debug uart for linux, will be used for debug and uncompress messages */
-#define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE
-#define VA_SPEAR_DBG_UART_BASE VA_SPEAR3XX_ICM1_UART_BASE
-
-/* Sysctl base for spear platform */
-#define SPEAR_SYS_CTRL_BASE SPEAR3XX_ICM3_SYS_CTRL_BASE
-#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR3XX_ICM3_SYS_CTRL_BASE
-
-/* SPEAr320 Macros */
-#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
-#define VA_SPEAR320_SOC_CONFIG_BASE UL(0xFE000000)
-#define SPEAR320_CONTROL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE)
-#define SPEAR320_EXT_CTRL_REG IOMEM(VA_SPEAR320_SOC_CONFIG_BASE + 0x0018)
- #define SPEAR320_UARTX_PCLK_MASK 0x1
- #define SPEAR320_UART2_PCLK_SHIFT 8
- #define SPEAR320_UART3_PCLK_SHIFT 9
- #define SPEAR320_UART4_PCLK_SHIFT 10
- #define SPEAR320_UART5_PCLK_SHIFT 11
- #define SPEAR320_UART6_PCLK_SHIFT 12
- #define SPEAR320_RS485_PCLK_SHIFT 13
-
-#endif /* __MACH_SPEAR3XX_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h
deleted file mode 100644
index 9f5d08b..0000000
--- a/arch/arm/mach-spear3xx/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/timex.h
- *
- * SPEAr3XX machine family specific timex definitions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-#include <plat/timex.h>
-
-#endif /* __MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h
deleted file mode 100644
index b909b01..0000000
--- a/arch/arm/mach-spear3xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#include <plat/uncompress.h>
-
-#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig
deleted file mode 100644
index 339f397..0000000
--- a/arch/arm/mach-spear6xx/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# SPEAr6XX Machine configuration file
-#
-
-config MACH_SPEAR600
- def_bool y
- depends on ARCH_SPEAR6XX
- select USE_OF
- help
- Supports ST SPEAr600 boards configured via the device-tree
diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
deleted file mode 100644
index 898831d..0000000
--- a/arch/arm/mach-spear6xx/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for SPEAr6XX machine series
-#
-
-# common files
-obj-y += spear6xx.o
diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot
deleted file mode 100644
index 4674a4c..0000000
--- a/arch/arm/mach-spear6xx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-spear6xx/include/mach/debug-macro.S b/arch/arm/mach-spear6xx/include/mach/debug-macro.S
deleted file mode 100644
index 0f3ea39..0000000
--- a/arch/arm/mach-spear6xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/debug-macro.S
- *
- * Debugging macro include header for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
deleted file mode 100644
index 65514b15..0000000
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/generic.h
- *
- * SPEAr6XX machine family specific generic header file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GENERIC_H
-#define __MACH_GENERIC_H
-
-#include <linux/init.h>
-
-void __init spear_setup_of_timer(void);
-void spear_restart(char, const char *);
-void __init spear6xx_clk_init(void);
-
-#endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h
deleted file mode 100644
index 40a8c178..0000000
--- a/arch/arm/mach-spear6xx/include/mach/hardware.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h
deleted file mode 100644
index 37a5c41..0000000
--- a/arch/arm/mach-spear6xx/include/mach/irqs.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/irqs.h
- *
- * IRQ helper macros for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-/* IRQ definitions */
-/* VIC 1 */
-#define IRQ_VIC_END 64
-
-/* GPIO pins virtual irqs */
-#define VIRTUAL_IRQS 24
-#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS)
-
-#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
deleted file mode 100644
index c34acc2..0000000
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/misc_regs.h
- *
- * Miscellaneous registers definitions for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MISC_REGS_H
-#define __MACH_MISC_REGS_H
-
-#include <mach/spear.h>
-
-#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
-
-#endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h
deleted file mode 100644
index cb8ed2f..0000000
--- a/arch/arm/mach-spear6xx/include/mach/spear.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/spear.h
- *
- * SPEAr6xx Machine family specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SPEAR6XX_H
-#define __MACH_SPEAR6XX_H
-
-#include <asm/memory.h>
-
-/* ICM1 - Low speed connection */
-#define SPEAR6XX_ICM1_BASE UL(0xD0000000)
-#define VA_SPEAR6XX_ICM1_BASE UL(0xFD000000)
-#define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000)
-#define VA_SPEAR6XX_ICM1_UART0_BASE (VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE)
-
-/* ML-1, 2 - Multi Layer CPU Subsystem */
-#define SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
-#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
-
-/* ICM3 - Basic Subsystem */
-#define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
-#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
-#define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000)
-#define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
-#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE)
-#define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
-#define VA_SPEAR6XX_ICM3_MISC_REG_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE)
-
-/* Debug uart for linux, will be used for debug and uncompress messages */
-#define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE
-#define VA_SPEAR_DBG_UART_BASE VA_SPEAR6XX_ICM1_UART0_BASE
-
-/* Sysctl base for spear platform */
-#define SPEAR_SYS_CTRL_BASE SPEAR6XX_ICM3_SYS_CTRL_BASE
-#define VA_SPEAR_SYS_CTRL_BASE VA_SPEAR6XX_ICM3_SYS_CTRL_BASE
-
-#endif /* __MACH_SPEAR6XX_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/timex.h b/arch/arm/mach-spear6xx/include/mach/timex.h
deleted file mode 100644
index ac1c5b0..0000000
--- a/arch/arm/mach-spear6xx/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/timex.h
- *
- * SPEAr6XX machine family specific timex definitions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-#include <plat/timex.h>
-
-#endif /* __MACH_TIMEX_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/uncompress.h b/arch/arm/mach-spear6xx/include/mach/uncompress.h
deleted file mode 100644
index 77f0765..0000000
--- a/arch/arm/mach-spear6xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#include <plat/uncompress.h>
-
-#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 051b62c..7f2cb6c 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -81,7 +81,6 @@
#endif
struct mmci_platform_data mop500_sdi0_data = {
- .ios_handler = mop500_sdi0_ios_handler,
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA |
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index b034578..87d2d7b 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-nomadik.h>
@@ -439,6 +440,15 @@
regulator_put(prox_regulator);
}
+void mop500_snowball_ethernet_clock_enable(void)
+{
+ struct clk *clk;
+
+ clk = clk_get_sys("fsmc", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+}
+
static struct cryp_platform_data u8500_cryp1_platform_data = {
.mem_to_engine = {
.dir = STEDMA40_MEM_TO_PERIPH,
@@ -683,6 +693,8 @@
mop500_audio_init(parent);
mop500_uart_init(parent);
+ mop500_snowball_ethernet_clock_enable();
+
/* This board has full regulator constraints */
regulator_has_full_constraints();
}
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index eaa605f..d38951b 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -104,6 +104,7 @@
void __init snowball_pinmaps_init(void);
void __init hrefv60_pinmaps_init(void);
void mop500_audio_init(struct device *parent);
+void mop500_snowball_ethernet_clock_enable(void);
int __init mop500_uib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 19235cf..f1a5818 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -312,9 +312,10 @@
/* Pinmaps must be in place before devices register */
if (of_machine_is_compatible("st-ericsson,mop500"))
mop500_pinmaps_init();
- else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+ else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
snowball_pinmaps_init();
- else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+ mop500_snowball_ethernet_clock_enable();
+ } else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
hrefv60_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
/* TODO: Add pinmaps for ccu9540 board. */
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index c2f3739..c465fac 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -299,7 +299,7 @@
int lockregs;
int i;
- switch (cache_id) {
+ switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
case L2X0_CACHE_ID_PART_L310:
lockregs = 8;
break;
@@ -333,15 +333,14 @@
if (cache_id_part_number_from_dt)
cache_id = cache_id_part_number_from_dt;
else
- cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID)
- & L2X0_CACHE_ID_PART_MASK;
+ cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
aux &= aux_mask;
aux |= aux_val;
/* Determine the number of ways */
- switch (cache_id) {
+ switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
case L2X0_CACHE_ID_PART_L310:
if (aux & (1 << 16))
ways = 16;
@@ -725,7 +724,6 @@
.flush_all = l2x0_flush_all,
.inv_all = l2x0_inv_all,
.disable = l2x0_disable,
- .set_debug = pl310_set_debug,
},
};
@@ -814,9 +812,8 @@
data->save();
of_init = true;
- l2x0_init(l2x0_base, aux_val, aux_mask);
-
memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache));
+ l2x0_init(l2x0_base, aux_val, aux_mask);
return 0;
}
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index a5a4b2bc..2ac3737 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -48,7 +48,7 @@
static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
-static DEFINE_PER_CPU(atomic64_t, active_asids);
+DEFINE_PER_CPU(atomic64_t, active_asids);
static DEFINE_PER_CPU(u64, reserved_asids);
static cpumask_t tlb_flush_pending;
@@ -215,6 +215,7 @@
if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
local_flush_bp_all();
local_flush_tlb_all();
+ dummy_flush_tlb_a15_erratum();
}
atomic64_set(&per_cpu(active_asids, cpu), asid);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e95a996..7897894 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -598,39 +598,60 @@
} while (pte++, addr += PAGE_SIZE, addr != end);
}
-static void __init alloc_init_section(pud_t *pud, unsigned long addr,
+static void __init map_init_section(pmd_t *pmd, unsigned long addr,
+ unsigned long end, phys_addr_t phys,
+ const struct mem_type *type)
+{
+#ifndef CONFIG_ARM_LPAE
+ /*
+ * In classic MMU format, puds and pmds are folded in to
+ * the pgds. pmd_offset gives the PGD entry. PGDs refer to a
+ * group of L1 entries making up one logical pointer to
+ * an L2 table (2MB), where as PMDs refer to the individual
+ * L1 entries (1MB). Hence increment to get the correct
+ * offset for odd 1MB sections.
+ * (See arch/arm/include/asm/pgtable-2level.h)
+ */
+ if (addr & SECTION_SIZE)
+ pmd++;
+#endif
+ do {
+ *pmd = __pmd(phys | type->prot_sect);
+ phys += SECTION_SIZE;
+ } while (pmd++, addr += SECTION_SIZE, addr != end);
+
+ flush_pmd_entry(pmd);
+}
+
+static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
unsigned long end, phys_addr_t phys,
const struct mem_type *type)
{
pmd_t *pmd = pmd_offset(pud, addr);
+ unsigned long next;
- /*
- * Try a section mapping - end, addr and phys must all be aligned
- * to a section boundary. Note that PMDs refer to the individual
- * L1 entries, whereas PGDs refer to a group of L1 entries making
- * up one logical pointer to an L2 table.
- */
- if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
- pmd_t *p = pmd;
-
-#ifndef CONFIG_ARM_LPAE
- if (addr & SECTION_SIZE)
- pmd++;
-#endif
-
- do {
- *pmd = __pmd(phys | type->prot_sect);
- phys += SECTION_SIZE;
- } while (pmd++, addr += SECTION_SIZE, addr != end);
-
- flush_pmd_entry(p);
- } else {
+ do {
/*
- * No need to loop; pte's aren't interested in the
- * individual L1 entries.
+ * With LPAE, we must loop over to map
+ * all the pmds for the given range.
*/
- alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
- }
+ next = pmd_addr_end(addr, end);
+
+ /*
+ * Try a section mapping - addr, next and phys must all be
+ * aligned to a section boundary.
+ */
+ if (type->prot_sect &&
+ ((addr | next | phys) & ~SECTION_MASK) == 0) {
+ map_init_section(pmd, addr, next, phys, type);
+ } else {
+ alloc_init_pte(pmd, addr, next,
+ __phys_to_pfn(phys), type);
+ }
+
+ phys += next - addr;
+
+ } while (pmd++, addr = next, addr != end);
}
static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
@@ -641,7 +662,7 @@
do {
next = pud_addr_end(addr, end);
- alloc_init_section(pud, addr, next, phys, type);
+ alloc_init_pmd(pud, addr, next, phys, type);
phys += next - addr;
} while (pud++, addr = next, addr != end);
}
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 3a3c015..f584d3f 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -420,7 +420,7 @@
__v7_ca7mp_proc_info:
.long 0x410fc070
.long 0xff0ffff0
- __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+ __v7_proc __v7_ca7mp_setup
.size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
/*
@@ -430,10 +430,25 @@
__v7_ca15mp_proc_info:
.long 0x410fc0f0
.long 0xff0ffff0
- __v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
+ __v7_proc __v7_ca15mp_setup
.size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
/*
+ * Qualcomm Inc. Krait processors.
+ */
+ .type __krait_proc_info, #object
+__krait_proc_info:
+ .long 0x510f0400 @ Required ID value
+ .long 0xff0ffc00 @ Mask for ID
+ /*
+ * Some Krait processors don't indicate support for SDIV and UDIV
+ * instructions in the ARM instruction set, even though they actually
+ * do support them.
+ */
+ __v7_proc __v7_setup, hwcaps = HWCAP_IDIV
+ .size __krait_proc_info, . - __krait_proc_info
+
+ /*
* Match any ARMv7 processor core.
*/
.type __v7_proc_info, #object
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
deleted file mode 100644
index 8a08c31..0000000
--- a/arch/arm/plat-spear/Kconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# SPEAr Platform configuration file
-#
-
-if PLAT_SPEAR
-
-choice
- prompt "ST SPEAr Family"
- default ARCH_SPEAR3XX
-
-config ARCH_SPEAR13XX
- bool "ST SPEAr13xx with Device Tree"
- select ARCH_HAS_CPUFREQ
- select ARM_GIC
- select CPU_V7
- select GPIO_SPEAR_SPICS
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- select PINCTRL
- select USE_OF
- help
- Supports for ARM's SPEAR13XX family
-
-config ARCH_SPEAR3XX
- bool "ST SPEAr3xx with Device Tree"
- select ARM_VIC
- select CPU_ARM926T
- select PINCTRL
- select USE_OF
- help
- Supports for ARM's SPEAR3XX family
-
-config ARCH_SPEAR6XX
- bool "SPEAr6XX"
- select ARM_VIC
- select CPU_ARM926T
- help
- Supports for ARM's SPEAR6XX family
-
-endchoice
-
-# Adding SPEAr machine specific configuration files
-source "arch/arm/mach-spear13xx/Kconfig"
-source "arch/arm/mach-spear3xx/Kconfig"
-source "arch/arm/mach-spear6xx/Kconfig"
-
-endif
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
deleted file mode 100644
index 01e8853..0000000
--- a/arch/arm/plat-spear/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# SPEAr Platform specific Makefile
-#
-
-# Common support
-obj-y := restart.o time.o
-
-obj-$(CONFIG_ARCH_SPEAR3XX) += pl080.o
-obj-$(CONFIG_ARCH_SPEAR6XX) += pl080.o
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index cd2e21f..51244bf 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -18,7 +18,7 @@
select HAVE_KRETPROBES
select HAVE_DEBUG_KMEMLEAK
select ARCH_BINFMT_ELF_RANDOMIZE_PIE
- select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+ select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
select RTC_LIB if !MACH_LOONGSON
select GENERIC_ATOMIC64 if !64BIT
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
@@ -657,7 +657,7 @@
bool "SNI RM200/300/400"
select FW_ARC if CPU_LITTLE_ENDIAN
select FW_ARC32 if CPU_LITTLE_ENDIAN
- select SNIPROM if CPU_BIG_ENDIAN
+ select FW_SNIPROM if CPU_BIG_ENDIAN
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select CEVT_R4K
@@ -1144,7 +1144,7 @@
config FW_ARC32
bool
-config SNIPROM
+config FW_SNIPROM
bool
config BOOT_ELF32
@@ -1493,7 +1493,6 @@
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
- select CPU_HAS_LLSC
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_HAS_PREFETCH
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index ed1949c..9aa7d44 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -745,10 +745,7 @@
strcpy(cfe_version, "unknown");
printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
- if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) {
- printk(KERN_ERR PFX "invalid nvram checksum\n");
- return;
- }
+ bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
board_name = bcm63xx_nvram_get_name();
/* find board by name */
diff --git a/arch/mips/bcm63xx/nvram.c b/arch/mips/bcm63xx/nvram.c
index 6206116..a4b8864 100644
--- a/arch/mips/bcm63xx/nvram.c
+++ b/arch/mips/bcm63xx/nvram.c
@@ -38,7 +38,7 @@
static struct bcm963xx_nvram nvram;
static int mac_addr_used;
-int __init bcm63xx_nvram_init(void *addr)
+void __init bcm63xx_nvram_init(void *addr)
{
unsigned int check_len;
u32 crc, expected_crc;
@@ -60,9 +60,8 @@
crc = crc32_le(~0, (u8 *)&nvram, check_len);
if (crc != expected_crc)
- return -EINVAL;
-
- return 0;
+ pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
+ expected_crc, crc);
}
u8 *bcm63xx_nvram_get_name(void)
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index 314231b..35e18e9 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -157,4 +157,4 @@
return board_register_devices();
}
-device_initcall(bcm63xx_register_devices);
+arch_initcall(bcm63xx_register_devices);
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index c594a3d..b0baa29 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -174,7 +174,10 @@
static void octeon_generic_shutdown(void)
{
- int cpu, i;
+ int i;
+#ifdef CONFIG_SMP
+ int cpu;
+#endif
struct cvmx_bootmem_desc *bootmem_desc;
void *named_block_array_ptr;
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
index 62d6a3b..4e0b6bc 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
@@ -9,10 +9,8 @@
*
* Initialized the local nvram copy from the target address and checks
* its checksum.
- *
- * Returns 0 on success.
*/
-int __init bcm63xx_nvram_init(void *nvram);
+void bcm63xx_nvram_init(void *nvram);
/**
* bcm63xx_nvram_get_name() - returns the board name according to nvram
diff --git a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
index d9c8284..193c091 100644
--- a/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h
@@ -28,11 +28,7 @@
/* #define cpu_has_prefetch ? */
#define cpu_has_mcheck 1
/* #define cpu_has_ejtag ? */
-#ifdef CONFIG_CPU_HAS_LLSC
#define cpu_has_llsc 1
-#else
-#define cpu_has_llsc 0
-#endif
/* #define cpu_has_vtag_icache ? */
/* #define cpu_has_dc_aliases ? */
/* #define cpu_has_ic_fills_f_dc ? */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 12b70c2..0da44d4 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1166,7 +1166,10 @@
unsigned int __dspctl; \
\
__asm__ __volatile__( \
+ " .set push \n" \
+ " .set dsp \n" \
" rddsp %0, %x1 \n" \
+ " .set pop \n" \
: "=r" (__dspctl) \
: "i" (mask)); \
__dspctl; \
@@ -1175,30 +1178,198 @@
#define wrdsp(val, mask) \
do { \
__asm__ __volatile__( \
+ " .set push \n" \
+ " .set dsp \n" \
" wrdsp %0, %x1 \n" \
+ " .set pop \n" \
: \
: "r" (val), "i" (mask)); \
} while (0)
-#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
-#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
-#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
-#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
+#define mflo0() \
+({ \
+ long mflo0; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac0 \n" \
+ " .set pop \n" \
+ : "=r" (mflo0)); \
+ mflo0; \
+})
-#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
-#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
-#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
-#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
+#define mflo1() \
+({ \
+ long mflo1; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac1 \n" \
+ " .set pop \n" \
+ : "=r" (mflo1)); \
+ mflo1; \
+})
-#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
-#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
-#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
-#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
+#define mflo2() \
+({ \
+ long mflo2; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac2 \n" \
+ " .set pop \n" \
+ : "=r" (mflo2)); \
+ mflo2; \
+})
-#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
-#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
-#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
-#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+#define mflo3() \
+({ \
+ long mflo3; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac3 \n" \
+ " .set pop \n" \
+ : "=r" (mflo3)); \
+ mflo3; \
+})
+
+#define mfhi0() \
+({ \
+ long mfhi0; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac0 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi0)); \
+ mfhi0; \
+})
+
+#define mfhi1() \
+({ \
+ long mfhi1; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac1 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi1)); \
+ mfhi1; \
+})
+
+#define mfhi2() \
+({ \
+ long mfhi2; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac2 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi2)); \
+ mfhi2; \
+})
+
+#define mfhi3() \
+({ \
+ long mfhi3; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac3 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi3)); \
+ mfhi3; \
+})
+
+
+#define mtlo0(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac0 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mtlo1(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac1 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mtlo2(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac2 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mtlo3(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac3 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi0(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac0 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi1(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac1 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi2(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac2 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi3(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac3 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
#else
diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h
index 197f636..8efe5a9 100644
--- a/arch/mips/include/asm/signal.h
+++ b/arch/mips/include/asm/signal.h
@@ -21,6 +21,6 @@
#include <asm/sigcontext.h>
#include <asm/siginfo.h>
-#define __ARCH_HAS_ODD_SIGACTION
+#define __ARCH_HAS_IRIX_SIGACTION
#endif /* _ASM_SIGNAL_H */
diff --git a/arch/mips/include/uapi/asm/signal.h b/arch/mips/include/uapi/asm/signal.h
index d6b18b4..addb9f5 100644
--- a/arch/mips/include/uapi/asm/signal.h
+++ b/arch/mips/include/uapi/asm/signal.h
@@ -72,6 +72,12 @@
*
* SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
* Unix names RESETHAND and NODEFER respectively.
+ *
+ * SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever
+ * supported its use and no libc was using it, so the entire sa-restorer
+ * functionality was removed with lmo commit 39bffc12c3580ab for 2.5.48
+ * retaining only the SA_RESTORER definition as a reminder to avoid
+ * accidental reuse of the mask bit.
*/
#define SA_ONSTACK 0x08000000
#define SA_RESETHAND 0x80000000
@@ -84,8 +90,6 @@
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
-#define SA_RESTORER 0x04000000 /* Only for o32 */
-
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index f81d98f..de75fb5 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -100,29 +100,16 @@
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
#
-# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe
-# to enable DSP assembler support here even if the MIPS Release 2 CPU we
-# are targetting does not support DSP because all code-paths making use of
-# it properly check that the running CPU *actually does* support these
-# instructions.
+# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
+# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches
+# here because the compiler may use DSP ASE instructions (such as lwx) in
+# code paths where we cannot check that the CPU we are running on supports it.
+# Proper abstraction using HAVE_AS_DSP and macros is done in
+# arch/mips/include/asm/mipsregs.h.
#
ifeq ($(CONFIG_CPU_MIPSR2), y)
CFLAGS_DSP = -DHAVE_AS_DSP
-#
-# Check if assembler supports DSP ASE
-#
-ifeq ($(call cc-option-yn,-mdsp), y)
-CFLAGS_DSP += -mdsp
-endif
-
-#
-# Check if assembler supports DSP ASE Rev2
-#
-ifeq ($(call cc-option-yn,-mdspr2), y)
-CFLAGS_DSP += -mdspr2
-endif
-
CFLAGS_signal.o = $(CFLAGS_DSP)
CFLAGS_signal32.o = $(CFLAGS_DSP)
CFLAGS_process.o = $(CFLAGS_DSP)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 6bfccc2..5fe66a0 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -580,6 +580,9 @@
c->tlbsize = 48;
break;
case PRID_IMP_VR41XX:
+ set_isa(c, MIPS_CPU_ISA_III);
+ c->options = R4K_OPTS;
+ c->tlbsize = 32;
switch (c->processor_id & 0xf0) {
case PRID_REV_VR4111:
c->cputype = CPU_VR4111;
@@ -604,6 +607,7 @@
__cpu_name[cpu] = "NEC VR4131";
} else {
c->cputype = CPU_VR4133;
+ c->options |= MIPS_CPU_LLSC;
__cpu_name[cpu] = "NEC VR4133";
}
break;
@@ -613,9 +617,6 @@
__cpu_name[cpu] = "NEC Vr41xx";
break;
}
- set_isa(c, MIPS_CPU_ISA_III);
- c->options = R4K_OPTS;
- c->tlbsize = 32;
break;
case PRID_IMP_R4300:
c->cputype = CPU_R4300;
@@ -1226,10 +1227,8 @@
if (c->options & MIPS_CPU_FPU) {
c->fpu_id = cpu_get_fpu_id();
- if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
- c->isa_level == MIPS_CPU_ISA_M32R2 ||
- c->isa_level == MIPS_CPU_ISA_M64R1 ||
- c->isa_level == MIPS_CPU_ISA_M64R2) {
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+ MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) {
if (c->fpu_id & MIPS_FPIR_3D)
c->ases |= MIPS_ASE_MIPS3D;
}
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 8eeee1c..db9655f 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -171,7 +171,7 @@
err = compat_sys_shmctl(first, second, compat_ptr(ptr));
break;
default:
- err = -EINVAL;
+ err = -ENOSYS;
break;
}
diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
index 1658676..33d0671 100644
--- a/arch/mips/kernel/mcount.S
+++ b/arch/mips/kernel/mcount.S
@@ -46,10 +46,9 @@
PTR_L a5, PT_R9(sp)
PTR_L a6, PT_R10(sp)
PTR_L a7, PT_R11(sp)
-#else
- PTR_ADDIU sp, PT_SIZE
#endif
-.endm
+ PTR_ADDIU sp, PT_SIZE
+ .endm
.macro RETURN_BACK
jr ra
@@ -68,7 +67,11 @@
.globl _mcount
_mcount:
b ftrace_stub
- addiu sp,sp,8
+#ifdef CONFIG_32BIT
+ addiu sp,sp,8
+#else
+ nop
+#endif
/* When tracing is activated, it calls ftrace_caller+8 (aka here) */
lw t1, function_trace_stop
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 135c4aa..7a54f74 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -67,7 +67,7 @@
if (cpu_has_mips_r) {
seq_printf(m, "isa\t\t\t:");
if (cpu_has_mips_1)
- seq_printf(m, "%s", "mips1");
+ seq_printf(m, "%s", " mips1");
if (cpu_has_mips_2)
seq_printf(m, "%s", " mips2");
if (cpu_has_mips_3)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index a200b5b..c3abb881 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1571,7 +1571,7 @@
#ifdef CONFIG_64BIT
status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
#endif
- if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
+ if (current_cpu_data.isa_level & MIPS_CPU_ISA_IV)
status_set |= ST0_XX;
if (cpu_has_dsp)
status_set |= ST0_MX;
diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c
index 81f1dcf..a64daee 100644
--- a/arch/mips/lib/bitops.c
+++ b/arch/mips/lib/bitops.c
@@ -90,12 +90,12 @@
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a |= mask;
raw_local_irq_restore(flags);
return res;
@@ -116,12 +116,12 @@
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a |= mask;
raw_local_irq_restore(flags);
return res;
@@ -141,12 +141,12 @@
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a &= ~mask;
raw_local_irq_restore(flags);
return res;
@@ -166,12 +166,12 @@
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a ^= mask;
raw_local_irq_restore(flags);
return res;
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index 507147a..a6adffb 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -270,7 +270,7 @@
#endif
/* odd buffer alignment? */
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
wsbh v1, sum
movn sum, v1, t7
#else
@@ -670,7 +670,7 @@
addu sum, v1
#endif
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
wsbh v1, sum
movn sum, v1, odd
#else
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index ecca559..2078915 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1247,10 +1247,8 @@
return;
default:
- if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
- c->isa_level == MIPS_CPU_ISA_M32R2 ||
- c->isa_level == MIPS_CPU_ISA_M64R1 ||
- c->isa_level == MIPS_CPU_ISA_M64R2) {
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+ MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)) {
#ifdef CONFIG_MIPS_CPU_SCACHE
if (mips_sc_init ()) {
scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 93d937b..df96da7 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -98,10 +98,8 @@
c->scache.flags |= MIPS_CACHE_NOT_PRESENT;
/* Ignore anything but MIPSxx processors */
- if (c->isa_level != MIPS_CPU_ISA_M32R1 &&
- c->isa_level != MIPS_CPU_ISA_M32R2 &&
- c->isa_level != MIPS_CPU_ISA_M64R1 &&
- c->isa_level != MIPS_CPU_ISA_M64R2)
+ if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
+ MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)))
return 0;
/* Does this MIPS32/MIPS64 CPU have a config2 register? */
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index 38a80c8..d1faece 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -19,7 +19,7 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/tlbmisc.h>
-#ifdef CONFIG_DEBUG_PCI
+#ifdef CONFIG_PCI_DEBUG
#define DBG(x...) printk(KERN_DEBUG x)
#else
#define DBG(x...) do {} while (0)
@@ -162,7 +162,7 @@
if (status & (1 << 29)) {
*data = 0xffffffff;
error = -1;
- DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d",
+ DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d\n",
access_type, bus->number, device);
} else if ((status >> 28) & 0xf) {
DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n",
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 4a29308..4a54431 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -344,6 +344,7 @@
#define _REGION3_ENTRY_CO 0x100 /* change-recording override */
/* Bits in the segment table entry */
+#define _SEGMENT_ENTRY_ORIGIN_LARGE ~0xfffffUL /* large page address */
#define _SEGMENT_ENTRY_ORIGIN ~0x7ffUL/* segment table origin */
#define _SEGMENT_ENTRY_RO 0x200 /* page protection bit */
#define _SEGMENT_ENTRY_INV 0x20 /* invalid segment table entry */
@@ -1531,7 +1532,8 @@
/*
* No page table caches to initialise
*/
-#define pgtable_cache_init() do { } while (0)
+static inline void pgtable_cache_init(void) { }
+static inline void check_pgt_cache(void) { }
#include <asm-generic/pgtable.h>
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index dff631d..466fb33 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -77,42 +77,69 @@
* >= -4095 (IS_ERR_VALUE(x) returns true), a fault has occured and the address
* contains the (negative) exception code.
*/
-static __always_inline unsigned long follow_table(struct mm_struct *mm,
- unsigned long addr, int write)
+#ifdef CONFIG_64BIT
+static unsigned long follow_table(struct mm_struct *mm,
+ unsigned long address, int write)
{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *ptep;
+ unsigned long *table = (unsigned long *)__pa(mm->pgd);
- pgd = pgd_offset(mm, addr);
- if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
- return -0x3aUL;
-
- pud = pud_offset(pgd, addr);
- if (pud_none(*pud) || unlikely(pud_bad(*pud)))
- return -0x3bUL;
-
- pmd = pmd_offset(pud, addr);
- if (pmd_none(*pmd))
- return -0x10UL;
- if (pmd_large(*pmd)) {
- if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO))
- return -0x04UL;
- return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK);
+ switch (mm->context.asce_bits & _ASCE_TYPE_MASK) {
+ case _ASCE_TYPE_REGION1:
+ table = table + ((address >> 53) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV))
+ return -0x39UL;
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ case _ASCE_TYPE_REGION2:
+ table = table + ((address >> 42) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV))
+ return -0x3aUL;
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ case _ASCE_TYPE_REGION3:
+ table = table + ((address >> 31) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV))
+ return -0x3bUL;
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ case _ASCE_TYPE_SEGMENT:
+ table = table + ((address >> 20) & 0x7ff);
+ if (unlikely(*table & _SEGMENT_ENTRY_INV))
+ return -0x10UL;
+ if (unlikely(*table & _SEGMENT_ENTRY_LARGE)) {
+ if (write && (*table & _SEGMENT_ENTRY_RO))
+ return -0x04UL;
+ return (*table & _SEGMENT_ENTRY_ORIGIN_LARGE) +
+ (address & ~_SEGMENT_ENTRY_ORIGIN_LARGE);
+ }
+ table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN);
}
- if (unlikely(pmd_bad(*pmd)))
- return -0x10UL;
-
- ptep = pte_offset_map(pmd, addr);
- if (!pte_present(*ptep))
+ table = table + ((address >> 12) & 0xff);
+ if (unlikely(*table & _PAGE_INVALID))
return -0x11UL;
- if (write && (!pte_write(*ptep) || !pte_dirty(*ptep)))
+ if (write && (*table & _PAGE_RO))
return -0x04UL;
-
- return (pte_val(*ptep) & PAGE_MASK) + (addr & ~PAGE_MASK);
+ return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
}
+#else /* CONFIG_64BIT */
+
+static unsigned long follow_table(struct mm_struct *mm,
+ unsigned long address, int write)
+{
+ unsigned long *table = (unsigned long *)__pa(mm->pgd);
+
+ table = table + ((address >> 20) & 0x7ff);
+ if (unlikely(*table & _SEGMENT_ENTRY_INV))
+ return -0x10UL;
+ table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN);
+ table = table + ((address >> 12) & 0xff);
+ if (unlikely(*table & _PAGE_INVALID))
+ return -0x11UL;
+ if (write && (*table & _PAGE_RO))
+ return -0x04UL;
+ return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
+}
+
+#endif /* CONFIG_64BIT */
+
static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr,
size_t n, int write_user)
{
@@ -197,7 +224,7 @@
static size_t clear_user_pt(size_t n, void __user *to)
{
- void *zpage = &empty_zero_page;
+ void *zpage = (void *) empty_zero_page;
long done, size, ret;
done = 0;
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index d1e15f7..7a5aa1a 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -1004,15 +1004,8 @@
#ifdef CONFIG_BLK_DEV_INITRD
-/*
- * Note that the kernel can potentially support other compression
- * techniques than gz, though we don't do so by default. If we ever
- * decide to do so we can either look for other filename extensions,
- * or just allow a file with this name to be compressed with an
- * arbitrary compressor (somewhat counterintuitively).
- */
static int __initdata set_initramfs_file;
-static char __initdata initramfs_file[128] = "initramfs.cpio.gz";
+static char __initdata initramfs_file[128] = "initramfs";
static int __init setup_initramfs_file(char *str)
{
@@ -1026,9 +1019,9 @@
early_param("initramfs_file", setup_initramfs_file);
/*
- * We look for an "initramfs.cpio.gz" file in the hvfs.
- * If there is one, we allocate some memory for it and it will be
- * unpacked to the initramfs.
+ * We look for a file called "initramfs" in the hvfs. If there is one, we
+ * allocate some memory for it and it will be unpacked to the initramfs.
+ * If it's compressed, the initd code will uncompress it first.
*/
static void __init load_hv_initrd(void)
{
@@ -1038,10 +1031,16 @@
fd = hv_fs_findfile((HV_VirtAddr) initramfs_file);
if (fd == HV_ENOENT) {
- if (set_initramfs_file)
+ if (set_initramfs_file) {
pr_warning("No such hvfs initramfs file '%s'\n",
initramfs_file);
- return;
+ return;
+ } else {
+ /* Try old backwards-compatible name. */
+ fd = hv_fs_findfile((HV_VirtAddr)"initramfs.cpio.gz");
+ if (fd == HV_ENOENT)
+ return;
+ }
}
BUG_ON(fd < 0);
stat = hv_fs_fstat(fd);
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 8a84501..5ef205c 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -4,7 +4,7 @@
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo head_$(BITS).o misc.o string.o cmdline.o early_serial_console.o piggy.o
+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
@@ -29,7 +29,6 @@
$(obj)/piggy.o
$(obj)/eboot.o: KBUILD_CFLAGS += -fshort-wchar -mno-red-zone
-$(obj)/efi_stub_$(BITS).o: KBUILD_CLFAGS += -fshort-wchar -mno-red-zone
ifeq ($(CONFIG_EFI_STUB), y)
VMLINUX_OBJS += $(obj)/eboot.o $(obj)/efi_stub_$(BITS).o
@@ -43,7 +42,7 @@
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
-targets += vmlinux.bin.all vmlinux.relocs
+targets += $(patsubst $(obj)/%,%,$(VMLINUX_OBJS)) vmlinux.bin.all vmlinux.relocs
CMD_RELOCS = arch/x86/tools/relocs
quiet_cmd_relocs = RELOCS $@
diff --git a/arch/x86/include/asm/syscall.h b/arch/x86/include/asm/syscall.h
index 1ace47b..2e188d6 100644
--- a/arch/x86/include/asm/syscall.h
+++ b/arch/x86/include/asm/syscall.h
@@ -29,13 +29,13 @@
*/
static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
{
- return regs->orig_ax & __SYSCALL_MASK;
+ return regs->orig_ax;
}
static inline void syscall_rollback(struct task_struct *task,
struct pt_regs *regs)
{
- regs->ax = regs->orig_ax & __SYSCALL_MASK;
+ regs->ax = regs->orig_ax;
}
static inline long syscall_get_error(struct task_struct *task,
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 02b51dd..f77df1c 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1857,7 +1857,7 @@
if (!pv_eoi_enabled(vcpu))
return 0;
return kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.pv_eoi.data,
- addr);
+ addr, sizeof(u8));
}
void kvm_lapic_init(void)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index f19ac0a..e172132 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1823,7 +1823,8 @@
return 0;
}
- if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.apf.data, gpa))
+ if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.apf.data, gpa,
+ sizeof(u32)))
return 1;
vcpu->arch.apf.send_user_only = !(data & KVM_ASYNC_PF_SEND_ALWAYS);
@@ -1952,12 +1953,9 @@
gpa_offset = data & ~(PAGE_MASK | 1);
- /* Check that the address is 32-byte aligned. */
- if (gpa_offset & (sizeof(struct pvclock_vcpu_time_info) - 1))
- break;
-
if (kvm_gfn_to_hva_cache_init(vcpu->kvm,
- &vcpu->arch.pv_time, data & ~1ULL))
+ &vcpu->arch.pv_time, data & ~1ULL,
+ sizeof(struct pvclock_vcpu_time_info)))
vcpu->arch.pv_time_enabled = false;
else
vcpu->arch.pv_time_enabled = true;
@@ -1977,7 +1975,8 @@
return 1;
if (kvm_gfn_to_hva_cache_init(vcpu->kvm, &vcpu->arch.st.stime,
- data & KVM_STEAL_VALID_BITS))
+ data & KVM_STEAL_VALID_BITS,
+ sizeof(struct kvm_steal_time)))
return 1;
vcpu->arch.st.msr_val = data;
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 92ed969..4bf68c8 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -396,7 +396,7 @@
config ACPI_BGRT
bool "Boottime Graphics Resource Table support"
- depends on EFI
+ depends on EFI && X86
help
This driver adds support for exposing the ACPI Boottime Graphics
Resource Table, which allows the operating system to obtain
diff --git a/drivers/acpi/acpi_i2c.c b/drivers/acpi/acpi_i2c.c
index 82045e3..a82c762 100644
--- a/drivers/acpi/acpi_i2c.c
+++ b/drivers/acpi/acpi_i2c.c
@@ -90,7 +90,7 @@
acpi_handle handle;
acpi_status status;
- handle = ACPI_HANDLE(&adapter->dev);
+ handle = ACPI_HANDLE(adapter->dev.parent);
if (!handle)
return;
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 5ff1730..6ae5e44 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -415,7 +415,6 @@
struct acpi_pci_root *root;
struct acpi_pci_driver *driver;
u32 flags, base_flags;
- bool is_osc_granted = false;
root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
if (!root)
@@ -476,6 +475,30 @@
flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
acpi_pci_osc_support(root, flags);
+ /*
+ * TBD: Need PCI interface for enumeration/configuration of roots.
+ */
+
+ mutex_lock(&acpi_pci_root_lock);
+ list_add_tail(&root->node, &acpi_pci_roots);
+ mutex_unlock(&acpi_pci_root_lock);
+
+ /*
+ * Scan the Root Bridge
+ * --------------------
+ * Must do this prior to any attempt to bind the root device, as the
+ * PCI namespace does not get created until this call is made (and
+ * thus the root bridge's pci_dev does not exist).
+ */
+ root->bus = pci_acpi_scan_root(root);
+ if (!root->bus) {
+ printk(KERN_ERR PREFIX
+ "Bus %04x:%02x not present in PCI namespace\n",
+ root->segment, (unsigned int)root->secondary.start);
+ result = -ENODEV;
+ goto out_del_root;
+ }
+
/* Indicate support for various _OSC capabilities. */
if (pci_ext_cfg_avail())
flags |= OSC_EXT_PCI_CONFIG_SUPPORT;
@@ -494,6 +517,7 @@
flags = base_flags;
}
}
+
if (!pcie_ports_disabled
&& (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) {
flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL
@@ -514,54 +538,28 @@
status = acpi_pci_osc_control_set(device->handle, &flags,
OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
if (ACPI_SUCCESS(status)) {
- is_osc_granted = true;
dev_info(&device->dev,
"ACPI _OSC control (0x%02x) granted\n", flags);
+ if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
+ /*
+ * We have ASPM control, but the FADT indicates
+ * that it's unsupported. Clear it.
+ */
+ pcie_clear_aspm(root->bus);
+ }
} else {
- is_osc_granted = false;
dev_info(&device->dev,
"ACPI _OSC request failed (%s), "
"returned control mask: 0x%02x\n",
acpi_format_exception(status), flags);
+ pr_info("ACPI _OSC control for PCIe not granted, "
+ "disabling ASPM\n");
+ pcie_no_aspm();
}
} else {
dev_info(&device->dev,
- "Unable to request _OSC control "
- "(_OSC support mask: 0x%02x)\n", flags);
- }
-
- /*
- * TBD: Need PCI interface for enumeration/configuration of roots.
- */
-
- mutex_lock(&acpi_pci_root_lock);
- list_add_tail(&root->node, &acpi_pci_roots);
- mutex_unlock(&acpi_pci_root_lock);
-
- /*
- * Scan the Root Bridge
- * --------------------
- * Must do this prior to any attempt to bind the root device, as the
- * PCI namespace does not get created until this call is made (and
- * thus the root bridge's pci_dev does not exist).
- */
- root->bus = pci_acpi_scan_root(root);
- if (!root->bus) {
- printk(KERN_ERR PREFIX
- "Bus %04x:%02x not present in PCI namespace\n",
- root->segment, (unsigned int)root->secondary.start);
- result = -ENODEV;
- goto out_del_root;
- }
-
- /* ASPM setting */
- if (is_osc_granted) {
- if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM)
- pcie_clear_aspm(root->bus);
- } else {
- pr_info("ACPI _OSC control for PCIe not granted, "
- "disabling ASPM\n");
- pcie_no_aspm();
+ "Unable to request _OSC control "
+ "(_OSC support mask: 0x%02x)\n", flags);
}
pci_acpi_add_bus_pm_notifier(device, root->bus);
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index fc95308..ee255c6 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -66,7 +66,8 @@
static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
-static struct acpi_processor_cx *acpi_cstate[CPUIDLE_STATE_MAX];
+static DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX],
+ acpi_cstate);
static int disabled_by_idle_boot_param(void)
{
@@ -722,7 +723,7 @@
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
@@ -745,7 +746,7 @@
*/
static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
{
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
ACPI_FLUSH_CPU_CACHE();
@@ -775,7 +776,7 @@
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
@@ -833,7 +834,7 @@
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
@@ -960,7 +961,7 @@
!(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
continue;
#endif
- acpi_cstate[count] = cx;
+ per_cpu(acpi_cstate[count], dev->cpu) = cx;
count++;
if (count == CPUIDLE_STATE_MAX)
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 405022d..7638121 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -209,8 +209,6 @@
struct dma_chan *dma_chan;
/* Mask for DMA transfers */
dma_cap_mask_t mask;
- /* dma channel private data */
- void *dma_priv;
/* DMA transfer work */
struct work_struct work;
/* DMA delayed finish work */
@@ -308,6 +306,7 @@
static int cf_init(struct arasan_cf_dev *acdev)
{
struct arasan_cf_pdata *pdata = dev_get_platdata(acdev->host->dev);
+ unsigned int if_clk;
unsigned long flags;
int ret = 0;
@@ -325,8 +324,12 @@
spin_lock_irqsave(&acdev->host->lock, flags);
/* configure CF interface clock */
- writel((pdata->cf_if_clk <= CF_IF_CLK_200M) ? pdata->cf_if_clk :
- CF_IF_CLK_166M, acdev->vbase + CLK_CFG);
+ /* TODO: read from device tree */
+ if_clk = CF_IF_CLK_166M;
+ if (pdata && pdata->cf_if_clk <= CF_IF_CLK_200M)
+ if_clk = pdata->cf_if_clk;
+
+ writel(if_clk, acdev->vbase + CLK_CFG);
writel(TRUE_IDE_MODE | CFHOST_ENB, acdev->vbase + OP_MODE);
cf_interrupt_enable(acdev, CARD_DETECT_IRQ, 1);
@@ -357,12 +360,6 @@
complete(&acdev->dma_completion);
}
-static bool filter(struct dma_chan *chan, void *slave)
-{
- chan->private = slave;
- return true;
-}
-
static inline void dma_complete(struct arasan_cf_dev *acdev)
{
struct ata_queued_cmd *qc = acdev->qc;
@@ -530,8 +527,7 @@
/* request dma channels */
/* dma_request_channel may sleep, so calling from process context */
- acdev->dma_chan = dma_request_channel(acdev->mask, filter,
- acdev->dma_priv);
+ acdev->dma_chan = dma_request_slave_channel(acdev->host->dev, "data");
if (!acdev->dma_chan) {
dev_err(acdev->host->dev, "Unable to get dma_chan\n");
goto chan_request_fail;
@@ -798,6 +794,7 @@
struct ata_host *host;
struct ata_port *ap;
struct resource *res;
+ u32 quirk;
irq_handler_t irq_handler = NULL;
int ret = 0;
@@ -817,12 +814,17 @@
return -ENOMEM;
}
+ if (pdata)
+ quirk = pdata->quirk;
+ else
+ quirk = CF_BROKEN_UDMA; /* as it is on spear1340 */
+
/* if irq is 0, support only PIO */
acdev->irq = platform_get_irq(pdev, 0);
if (acdev->irq)
irq_handler = arasan_cf_interrupt;
else
- pdata->quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA;
+ quirk |= CF_BROKEN_MWDMA | CF_BROKEN_UDMA;
acdev->pbase = res->start;
acdev->vbase = devm_ioremap_nocache(&pdev->dev, res->start,
@@ -859,17 +861,16 @@
INIT_WORK(&acdev->work, data_xfer);
INIT_DELAYED_WORK(&acdev->dwork, delayed_finish);
dma_cap_set(DMA_MEMCPY, acdev->mask);
- acdev->dma_priv = pdata->dma_priv;
/* Handle platform specific quirks */
- if (pdata->quirk) {
- if (pdata->quirk & CF_BROKEN_PIO) {
+ if (quirk) {
+ if (quirk & CF_BROKEN_PIO) {
ap->ops->set_piomode = NULL;
ap->pio_mask = 0;
}
- if (pdata->quirk & CF_BROKEN_MWDMA)
+ if (quirk & CF_BROKEN_MWDMA)
ap->mwdma_mask = 0;
- if (pdata->quirk & CF_BROKEN_UDMA)
+ if (quirk & CF_BROKEN_UDMA)
ap->udma_mask = 0;
}
ap->flags |= ATA_FLAG_PIO_POLLING | ATA_FLAG_NO_ATAPI;
diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c
index 5f74587e..71671c4 100644
--- a/drivers/base/power/qos.c
+++ b/drivers/base/power/qos.c
@@ -46,6 +46,7 @@
#include "power.h"
static DEFINE_MUTEX(dev_pm_qos_mtx);
+static DEFINE_MUTEX(dev_pm_qos_sysfs_mtx);
static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
@@ -216,12 +217,17 @@
struct pm_qos_constraints *c;
struct pm_qos_flags *f;
- mutex_lock(&dev_pm_qos_mtx);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
/*
* If the device's PM QoS resume latency limit or PM QoS flags have been
* exposed to user space, they have to be hidden at this point.
*/
+ pm_qos_sysfs_remove_latency(dev);
+ pm_qos_sysfs_remove_flags(dev);
+
+ mutex_lock(&dev_pm_qos_mtx);
+
__dev_pm_qos_hide_latency_limit(dev);
__dev_pm_qos_hide_flags(dev);
@@ -254,6 +260,8 @@
out:
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
}
/**
@@ -558,6 +566,14 @@
kfree(req);
}
+static void dev_pm_qos_drop_user_request(struct device *dev,
+ enum dev_pm_qos_req_type type)
+{
+ mutex_lock(&dev_pm_qos_mtx);
+ __dev_pm_qos_drop_user_request(dev, type);
+ mutex_unlock(&dev_pm_qos_mtx);
+}
+
/**
* dev_pm_qos_expose_latency_limit - Expose PM QoS latency limit to user space.
* @dev: Device whose PM QoS latency limit is to be exposed to user space.
@@ -581,6 +597,8 @@
return ret;
}
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
mutex_lock(&dev_pm_qos_mtx);
if (IS_ERR_OR_NULL(dev->power.qos))
@@ -591,26 +609,27 @@
if (ret < 0) {
__dev_pm_qos_remove_request(req);
kfree(req);
+ mutex_unlock(&dev_pm_qos_mtx);
goto out;
}
-
dev->power.qos->latency_req = req;
+
+ mutex_unlock(&dev_pm_qos_mtx);
+
ret = pm_qos_sysfs_add_latency(dev);
if (ret)
- __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
+ dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
out:
- mutex_unlock(&dev_pm_qos_mtx);
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
return ret;
}
EXPORT_SYMBOL_GPL(dev_pm_qos_expose_latency_limit);
static void __dev_pm_qos_hide_latency_limit(struct device *dev)
{
- if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req) {
- pm_qos_sysfs_remove_latency(dev);
+ if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req)
__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
- }
}
/**
@@ -619,9 +638,15 @@
*/
void dev_pm_qos_hide_latency_limit(struct device *dev)
{
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
+ pm_qos_sysfs_remove_latency(dev);
+
mutex_lock(&dev_pm_qos_mtx);
__dev_pm_qos_hide_latency_limit(dev);
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
}
EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit);
@@ -649,6 +674,8 @@
}
pm_runtime_get_sync(dev);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
mutex_lock(&dev_pm_qos_mtx);
if (IS_ERR_OR_NULL(dev->power.qos))
@@ -659,16 +686,19 @@
if (ret < 0) {
__dev_pm_qos_remove_request(req);
kfree(req);
+ mutex_unlock(&dev_pm_qos_mtx);
goto out;
}
-
dev->power.qos->flags_req = req;
+
+ mutex_unlock(&dev_pm_qos_mtx);
+
ret = pm_qos_sysfs_add_flags(dev);
if (ret)
- __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+ dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
out:
- mutex_unlock(&dev_pm_qos_mtx);
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
pm_runtime_put(dev);
return ret;
}
@@ -676,10 +706,8 @@
static void __dev_pm_qos_hide_flags(struct device *dev)
{
- if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req) {
- pm_qos_sysfs_remove_flags(dev);
+ if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req)
__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
- }
}
/**
@@ -689,9 +717,15 @@
void dev_pm_qos_hide_flags(struct device *dev)
{
pm_runtime_get_sync(dev);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
+ pm_qos_sysfs_remove_flags(dev);
+
mutex_lock(&dev_pm_qos_mtx);
__dev_pm_qos_hide_flags(dev);
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
pm_runtime_put(dev);
}
EXPORT_SYMBOL_GPL(dev_pm_qos_hide_flags);
diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c
index e6732cf..79f4fca 100644
--- a/drivers/base/regmap/regcache-rbtree.c
+++ b/drivers/base/regmap/regcache-rbtree.c
@@ -398,7 +398,7 @@
base = 0;
if (max < rbnode->base_reg + rbnode->blklen)
- end = rbnode->base_reg + rbnode->blklen - max;
+ end = max - rbnode->base_reg + 1;
else
end = rbnode->blklen;
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 3d23675..d34adef 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -710,12 +710,12 @@
}
}
+ regmap_debugfs_init(map, config->name);
+
ret = regcache_init(map, config);
if (ret != 0)
goto err_range;
- regmap_debugfs_init(map, config->name);
-
/* Add a devres resource for dev_get_regmap() */
m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL);
if (!m) {
@@ -943,8 +943,7 @@
unsigned int ival;
int val_bytes = map->format.val_bytes;
for (i = 0; i < val_len / val_bytes; i++) {
- memcpy(map->work_buf, val + (i * val_bytes), val_bytes);
- ival = map->format.parse_val(map->work_buf);
+ ival = map->format.parse_val(val + (i * val_bytes));
ret = regcache_write(map, reg + (i * map->reg_stride),
ival);
if (ret) {
@@ -1036,6 +1035,8 @@
kfree(async->work_buf);
kfree(async);
}
+
+ return ret;
}
trace_regmap_hw_write_start(map->dev, reg,
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 25ef5c0..92b6d7c 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -51,8 +51,9 @@
{
struct sk_buff *skb;
- skb = alloc_skb(len, GFP_ATOMIC);
+ skb = alloc_skb(len + MAX_HEADER, GFP_ATOMIC);
if (skb) {
+ skb_reserve(skb, MAX_HEADER);
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
skb->protocol = __constant_htons(ETH_P_AOE);
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index fe5f640..2c127f9 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -922,6 +922,11 @@
lo->lo_flags |= LO_FLAGS_PARTSCAN;
if (lo->lo_flags & LO_FLAGS_PARTSCAN)
ioctl_by_bdev(bdev, BLKRRPART, 0);
+
+ /* Grab the block_device to prevent its destruction after we
+ * put /dev/loopXX inode. Later in loop_clr_fd() we bdput(bdev).
+ */
+ bdgrab(bdev);
return 0;
out_clr:
@@ -1031,8 +1036,10 @@
memset(lo->lo_encrypt_key, 0, LO_KEY_SIZE);
memset(lo->lo_crypt_name, 0, LO_NAME_SIZE);
memset(lo->lo_file_name, 0, LO_NAME_SIZE);
- if (bdev)
+ if (bdev) {
+ bdput(bdev);
invalidate_bdev(bdev);
+ }
set_capacity(lo->lo_disk, 0);
loop_sysfs_exit(lo);
if (bdev) {
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index 69ae597..a0f7724 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -380,6 +380,15 @@
}
EXPORT_SYMBOL_GPL(hwrng_unregister);
+static void __exit hwrng_exit(void)
+{
+ mutex_lock(&rng_mutex);
+ BUG_ON(current_rng);
+ kfree(rng_buffer);
+ mutex_unlock(&rng_mutex);
+}
+
+module_exit(hwrng_exit);
MODULE_DESCRIPTION("H/W Random Number Generator (RNG) driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index e905d5f5..ce5f3fc 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -149,7 +149,8 @@
spinlock_t ports_lock;
/* To protect the vq operations for the control channel */
- spinlock_t cvq_lock;
+ spinlock_t c_ivq_lock;
+ spinlock_t c_ovq_lock;
/* The current config space is stored here */
struct virtio_console_config config;
@@ -569,11 +570,14 @@
vq = portdev->c_ovq;
sg_init_one(sg, &cpkt, sizeof(cpkt));
+
+ spin_lock(&portdev->c_ovq_lock);
if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt, GFP_ATOMIC) == 0) {
virtqueue_kick(vq);
while (!virtqueue_get_buf(vq, &len))
cpu_relax();
}
+ spin_unlock(&portdev->c_ovq_lock);
return 0;
}
@@ -1436,7 +1440,7 @@
* rproc_serial does not want the console port, only
* the generic port implementation.
*/
- port->host_connected = port->guest_connected = true;
+ port->host_connected = true;
else if (!use_multiport(port->portdev)) {
/*
* If we're not using multiport support,
@@ -1709,23 +1713,23 @@
portdev = container_of(work, struct ports_device, control_work);
vq = portdev->c_ivq;
- spin_lock(&portdev->cvq_lock);
+ spin_lock(&portdev->c_ivq_lock);
while ((buf = virtqueue_get_buf(vq, &len))) {
- spin_unlock(&portdev->cvq_lock);
+ spin_unlock(&portdev->c_ivq_lock);
buf->len = len;
buf->offset = 0;
handle_control_message(portdev, buf);
- spin_lock(&portdev->cvq_lock);
+ spin_lock(&portdev->c_ivq_lock);
if (add_inbuf(portdev->c_ivq, buf) < 0) {
dev_warn(&portdev->vdev->dev,
"Error adding buffer to queue\n");
free_buf(buf, false);
}
}
- spin_unlock(&portdev->cvq_lock);
+ spin_unlock(&portdev->c_ivq_lock);
}
static void out_intr(struct virtqueue *vq)
@@ -1752,13 +1756,23 @@
port->inbuf = get_inbuf(port);
/*
- * Don't queue up data when port is closed. This condition
+ * Normally the port should not accept data when the port is
+ * closed. For generic serial ports, the host won't (shouldn't)
+ * send data till the guest is connected. But this condition
* can be reached when a console port is not yet connected (no
- * tty is spawned) and the host sends out data to console
- * ports. For generic serial ports, the host won't
- * (shouldn't) send data till the guest is connected.
+ * tty is spawned) and the other side sends out data over the
+ * vring, or when a remote devices start sending data before
+ * the ports are opened.
+ *
+ * A generic serial port will discard data if not connected,
+ * while console ports and rproc-serial ports accepts data at
+ * any time. rproc-serial is initiated with guest_connected to
+ * false because port_fops_open expects this. Console ports are
+ * hooked up with an HVC console and is initialized with
+ * guest_connected to true.
*/
- if (!port->guest_connected)
+
+ if (!port->guest_connected && !is_rproc_serial(port->portdev->vdev))
discard_port_data(port);
spin_unlock_irqrestore(&port->inbuf_lock, flags);
@@ -1986,10 +2000,12 @@
if (multiport) {
unsigned int nr_added_bufs;
- spin_lock_init(&portdev->cvq_lock);
+ spin_lock_init(&portdev->c_ivq_lock);
+ spin_lock_init(&portdev->c_ovq_lock);
INIT_WORK(&portdev->control_work, &control_work_handler);
- nr_added_bufs = fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ nr_added_bufs = fill_queue(portdev->c_ivq,
+ &portdev->c_ivq_lock);
if (!nr_added_bufs) {
dev_err(&vdev->dev,
"Error allocating buffers for control queue\n");
@@ -2140,7 +2156,7 @@
return ret;
if (use_multiport(portdev))
- fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ fill_queue(portdev->c_ivq, &portdev->c_ivq_lock);
list_for_each_entry(port, &portdev->ports, list) {
port->in_vq = portdev->in_vqs[port->id];
diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c
index ed9af42..aedbbe1 100644
--- a/drivers/clk/spear/spear1310_clock.c
+++ b/drivers/clk/spear/spear1310_clock.c
@@ -17,12 +17,10 @@
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/spinlock_types.h>
-#include <mach/spear.h>
#include "clk.h"
-#define VA_SPEAR1310_RAS_BASE IOMEM(UL(0xFA400000))
/* PLL related registers and bit values */
-#define SPEAR1310_PLL_CFG (VA_MISC_BASE + 0x210)
+#define SPEAR1310_PLL_CFG (misc_base + 0x210)
/* PLL_CFG bit values */
#define SPEAR1310_CLCD_SYNT_CLK_MASK 1
#define SPEAR1310_CLCD_SYNT_CLK_SHIFT 31
@@ -35,15 +33,15 @@
#define SPEAR1310_PLL2_CLK_SHIFT 22
#define SPEAR1310_PLL1_CLK_SHIFT 20
-#define SPEAR1310_PLL1_CTR (VA_MISC_BASE + 0x214)
-#define SPEAR1310_PLL1_FRQ (VA_MISC_BASE + 0x218)
-#define SPEAR1310_PLL2_CTR (VA_MISC_BASE + 0x220)
-#define SPEAR1310_PLL2_FRQ (VA_MISC_BASE + 0x224)
-#define SPEAR1310_PLL3_CTR (VA_MISC_BASE + 0x22C)
-#define SPEAR1310_PLL3_FRQ (VA_MISC_BASE + 0x230)
-#define SPEAR1310_PLL4_CTR (VA_MISC_BASE + 0x238)
-#define SPEAR1310_PLL4_FRQ (VA_MISC_BASE + 0x23C)
-#define SPEAR1310_PERIP_CLK_CFG (VA_MISC_BASE + 0x244)
+#define SPEAR1310_PLL1_CTR (misc_base + 0x214)
+#define SPEAR1310_PLL1_FRQ (misc_base + 0x218)
+#define SPEAR1310_PLL2_CTR (misc_base + 0x220)
+#define SPEAR1310_PLL2_FRQ (misc_base + 0x224)
+#define SPEAR1310_PLL3_CTR (misc_base + 0x22C)
+#define SPEAR1310_PLL3_FRQ (misc_base + 0x230)
+#define SPEAR1310_PLL4_CTR (misc_base + 0x238)
+#define SPEAR1310_PLL4_FRQ (misc_base + 0x23C)
+#define SPEAR1310_PERIP_CLK_CFG (misc_base + 0x244)
/* PERIP_CLK_CFG bit values */
#define SPEAR1310_GPT_OSC24_VAL 0
#define SPEAR1310_GPT_APB_VAL 1
@@ -65,7 +63,7 @@
#define SPEAR1310_C3_CLK_MASK 1
#define SPEAR1310_C3_CLK_SHIFT 1
-#define SPEAR1310_GMAC_CLK_CFG (VA_MISC_BASE + 0x248)
+#define SPEAR1310_GMAC_CLK_CFG (misc_base + 0x248)
#define SPEAR1310_GMAC_PHY_IF_SEL_MASK 3
#define SPEAR1310_GMAC_PHY_IF_SEL_SHIFT 4
#define SPEAR1310_GMAC_PHY_CLK_MASK 1
@@ -73,7 +71,7 @@
#define SPEAR1310_GMAC_PHY_INPUT_CLK_MASK 2
#define SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT 1
-#define SPEAR1310_I2S_CLK_CFG (VA_MISC_BASE + 0x24C)
+#define SPEAR1310_I2S_CLK_CFG (misc_base + 0x24C)
/* I2S_CLK_CFG register mask */
#define SPEAR1310_I2S_SCLK_X_MASK 0x1F
#define SPEAR1310_I2S_SCLK_X_SHIFT 27
@@ -91,21 +89,21 @@
#define SPEAR1310_I2S_SRC_CLK_MASK 2
#define SPEAR1310_I2S_SRC_CLK_SHIFT 0
-#define SPEAR1310_C3_CLK_SYNT (VA_MISC_BASE + 0x250)
-#define SPEAR1310_UART_CLK_SYNT (VA_MISC_BASE + 0x254)
-#define SPEAR1310_GMAC_CLK_SYNT (VA_MISC_BASE + 0x258)
-#define SPEAR1310_SDHCI_CLK_SYNT (VA_MISC_BASE + 0x25C)
-#define SPEAR1310_CFXD_CLK_SYNT (VA_MISC_BASE + 0x260)
-#define SPEAR1310_ADC_CLK_SYNT (VA_MISC_BASE + 0x264)
-#define SPEAR1310_AMBA_CLK_SYNT (VA_MISC_BASE + 0x268)
-#define SPEAR1310_CLCD_CLK_SYNT (VA_MISC_BASE + 0x270)
-#define SPEAR1310_RAS_CLK_SYNT0 (VA_MISC_BASE + 0x280)
-#define SPEAR1310_RAS_CLK_SYNT1 (VA_MISC_BASE + 0x288)
-#define SPEAR1310_RAS_CLK_SYNT2 (VA_MISC_BASE + 0x290)
-#define SPEAR1310_RAS_CLK_SYNT3 (VA_MISC_BASE + 0x298)
+#define SPEAR1310_C3_CLK_SYNT (misc_base + 0x250)
+#define SPEAR1310_UART_CLK_SYNT (misc_base + 0x254)
+#define SPEAR1310_GMAC_CLK_SYNT (misc_base + 0x258)
+#define SPEAR1310_SDHCI_CLK_SYNT (misc_base + 0x25C)
+#define SPEAR1310_CFXD_CLK_SYNT (misc_base + 0x260)
+#define SPEAR1310_ADC_CLK_SYNT (misc_base + 0x264)
+#define SPEAR1310_AMBA_CLK_SYNT (misc_base + 0x268)
+#define SPEAR1310_CLCD_CLK_SYNT (misc_base + 0x270)
+#define SPEAR1310_RAS_CLK_SYNT0 (misc_base + 0x280)
+#define SPEAR1310_RAS_CLK_SYNT1 (misc_base + 0x288)
+#define SPEAR1310_RAS_CLK_SYNT2 (misc_base + 0x290)
+#define SPEAR1310_RAS_CLK_SYNT3 (misc_base + 0x298)
/* Check Fractional synthesizer reg masks */
-#define SPEAR1310_PERIP1_CLK_ENB (VA_MISC_BASE + 0x300)
+#define SPEAR1310_PERIP1_CLK_ENB (misc_base + 0x300)
/* PERIP1_CLK_ENB register masks */
#define SPEAR1310_RTC_CLK_ENB 31
#define SPEAR1310_ADC_CLK_ENB 30
@@ -138,7 +136,7 @@
#define SPEAR1310_SYSROM_CLK_ENB 1
#define SPEAR1310_BUS_CLK_ENB 0
-#define SPEAR1310_PERIP2_CLK_ENB (VA_MISC_BASE + 0x304)
+#define SPEAR1310_PERIP2_CLK_ENB (misc_base + 0x304)
/* PERIP2_CLK_ENB register masks */
#define SPEAR1310_THSENS_CLK_ENB 8
#define SPEAR1310_I2S_REF_PAD_CLK_ENB 7
@@ -150,7 +148,7 @@
#define SPEAR1310_DDR_CORE_CLK_ENB 1
#define SPEAR1310_DDR_CTRL_CLK_ENB 0
-#define SPEAR1310_RAS_CLK_ENB (VA_MISC_BASE + 0x310)
+#define SPEAR1310_RAS_CLK_ENB (misc_base + 0x310)
/* RAS_CLK_ENB register masks */
#define SPEAR1310_SYNT3_CLK_ENB 17
#define SPEAR1310_SYNT2_CLK_ENB 16
@@ -172,7 +170,7 @@
#define SPEAR1310_ACLK_CLK_ENB 0
/* RAS Area Control Register */
-#define SPEAR1310_RAS_CTRL_REG0 (VA_SPEAR1310_RAS_BASE + 0x000)
+#define SPEAR1310_RAS_CTRL_REG0 (ras_base + 0x000)
#define SPEAR1310_SSP1_CLK_MASK 3
#define SPEAR1310_SSP1_CLK_SHIFT 26
#define SPEAR1310_TDM_CLK_MASK 1
@@ -197,12 +195,12 @@
#define SPEAR1310_PCI_CLK_MASK 1
#define SPEAR1310_PCI_CLK_SHIFT 0
-#define SPEAR1310_RAS_CTRL_REG1 (VA_SPEAR1310_RAS_BASE + 0x004)
+#define SPEAR1310_RAS_CTRL_REG1 (ras_base + 0x004)
#define SPEAR1310_PHY_CLK_MASK 0x3
#define SPEAR1310_RMII_PHY_CLK_SHIFT 0
#define SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT 2
-#define SPEAR1310_RAS_SW_CLK_CTRL (VA_SPEAR1310_RAS_BASE + 0x0148)
+#define SPEAR1310_RAS_SW_CLK_CTRL (ras_base + 0x0148)
#define SPEAR1310_CAN1_CLK_ENB 25
#define SPEAR1310_CAN0_CLK_ENB 24
#define SPEAR1310_GPT64_CLK_ENB 23
@@ -385,7 +383,7 @@
static const char *pci_parents[] = { "ras_pll3_clk", "gen_syn2_clk", };
static const char *tdm_parents[] = { "ras_pll3_clk", "gen_syn1_clk", };
-void __init spear1310_clk_init(void)
+void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base)
{
struct clk *clk, *clk1;
diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c
index 35e7e26..9d0b394 100644
--- a/drivers/clk/spear/spear1340_clock.c
+++ b/drivers/clk/spear/spear1340_clock.c
@@ -17,18 +17,17 @@
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/spinlock_types.h>
-#include <mach/spear.h>
#include "clk.h"
/* Clock Configuration Registers */
-#define SPEAR1340_SYS_CLK_CTRL (VA_MISC_BASE + 0x200)
+#define SPEAR1340_SYS_CLK_CTRL (misc_base + 0x200)
#define SPEAR1340_HCLK_SRC_SEL_SHIFT 27
#define SPEAR1340_HCLK_SRC_SEL_MASK 1
#define SPEAR1340_SCLK_SRC_SEL_SHIFT 23
#define SPEAR1340_SCLK_SRC_SEL_MASK 3
/* PLL related registers and bit values */
-#define SPEAR1340_PLL_CFG (VA_MISC_BASE + 0x210)
+#define SPEAR1340_PLL_CFG (misc_base + 0x210)
/* PLL_CFG bit values */
#define SPEAR1340_CLCD_SYNT_CLK_MASK 1
#define SPEAR1340_CLCD_SYNT_CLK_SHIFT 31
@@ -40,15 +39,15 @@
#define SPEAR1340_PLL2_CLK_SHIFT 22
#define SPEAR1340_PLL1_CLK_SHIFT 20
-#define SPEAR1340_PLL1_CTR (VA_MISC_BASE + 0x214)
-#define SPEAR1340_PLL1_FRQ (VA_MISC_BASE + 0x218)
-#define SPEAR1340_PLL2_CTR (VA_MISC_BASE + 0x220)
-#define SPEAR1340_PLL2_FRQ (VA_MISC_BASE + 0x224)
-#define SPEAR1340_PLL3_CTR (VA_MISC_BASE + 0x22C)
-#define SPEAR1340_PLL3_FRQ (VA_MISC_BASE + 0x230)
-#define SPEAR1340_PLL4_CTR (VA_MISC_BASE + 0x238)
-#define SPEAR1340_PLL4_FRQ (VA_MISC_BASE + 0x23C)
-#define SPEAR1340_PERIP_CLK_CFG (VA_MISC_BASE + 0x244)
+#define SPEAR1340_PLL1_CTR (misc_base + 0x214)
+#define SPEAR1340_PLL1_FRQ (misc_base + 0x218)
+#define SPEAR1340_PLL2_CTR (misc_base + 0x220)
+#define SPEAR1340_PLL2_FRQ (misc_base + 0x224)
+#define SPEAR1340_PLL3_CTR (misc_base + 0x22C)
+#define SPEAR1340_PLL3_FRQ (misc_base + 0x230)
+#define SPEAR1340_PLL4_CTR (misc_base + 0x238)
+#define SPEAR1340_PLL4_FRQ (misc_base + 0x23C)
+#define SPEAR1340_PERIP_CLK_CFG (misc_base + 0x244)
/* PERIP_CLK_CFG bit values */
#define SPEAR1340_SPDIF_CLK_MASK 1
#define SPEAR1340_SPDIF_OUT_CLK_SHIFT 15
@@ -66,13 +65,13 @@
#define SPEAR1340_C3_CLK_MASK 1
#define SPEAR1340_C3_CLK_SHIFT 1
-#define SPEAR1340_GMAC_CLK_CFG (VA_MISC_BASE + 0x248)
+#define SPEAR1340_GMAC_CLK_CFG (misc_base + 0x248)
#define SPEAR1340_GMAC_PHY_CLK_MASK 1
#define SPEAR1340_GMAC_PHY_CLK_SHIFT 2
#define SPEAR1340_GMAC_PHY_INPUT_CLK_MASK 2
#define SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT 0
-#define SPEAR1340_I2S_CLK_CFG (VA_MISC_BASE + 0x24C)
+#define SPEAR1340_I2S_CLK_CFG (misc_base + 0x24C)
/* I2S_CLK_CFG register mask */
#define SPEAR1340_I2S_SCLK_X_MASK 0x1F
#define SPEAR1340_I2S_SCLK_X_SHIFT 27
@@ -90,21 +89,21 @@
#define SPEAR1340_I2S_SRC_CLK_MASK 2
#define SPEAR1340_I2S_SRC_CLK_SHIFT 0
-#define SPEAR1340_C3_CLK_SYNT (VA_MISC_BASE + 0x250)
-#define SPEAR1340_UART0_CLK_SYNT (VA_MISC_BASE + 0x254)
-#define SPEAR1340_UART1_CLK_SYNT (VA_MISC_BASE + 0x258)
-#define SPEAR1340_GMAC_CLK_SYNT (VA_MISC_BASE + 0x25C)
-#define SPEAR1340_SDHCI_CLK_SYNT (VA_MISC_BASE + 0x260)
-#define SPEAR1340_CFXD_CLK_SYNT (VA_MISC_BASE + 0x264)
-#define SPEAR1340_ADC_CLK_SYNT (VA_MISC_BASE + 0x270)
-#define SPEAR1340_AMBA_CLK_SYNT (VA_MISC_BASE + 0x274)
-#define SPEAR1340_CLCD_CLK_SYNT (VA_MISC_BASE + 0x27C)
-#define SPEAR1340_SYS_CLK_SYNT (VA_MISC_BASE + 0x284)
-#define SPEAR1340_GEN_CLK_SYNT0 (VA_MISC_BASE + 0x28C)
-#define SPEAR1340_GEN_CLK_SYNT1 (VA_MISC_BASE + 0x294)
-#define SPEAR1340_GEN_CLK_SYNT2 (VA_MISC_BASE + 0x29C)
-#define SPEAR1340_GEN_CLK_SYNT3 (VA_MISC_BASE + 0x304)
-#define SPEAR1340_PERIP1_CLK_ENB (VA_MISC_BASE + 0x30C)
+#define SPEAR1340_C3_CLK_SYNT (misc_base + 0x250)
+#define SPEAR1340_UART0_CLK_SYNT (misc_base + 0x254)
+#define SPEAR1340_UART1_CLK_SYNT (misc_base + 0x258)
+#define SPEAR1340_GMAC_CLK_SYNT (misc_base + 0x25C)
+#define SPEAR1340_SDHCI_CLK_SYNT (misc_base + 0x260)
+#define SPEAR1340_CFXD_CLK_SYNT (misc_base + 0x264)
+#define SPEAR1340_ADC_CLK_SYNT (misc_base + 0x270)
+#define SPEAR1340_AMBA_CLK_SYNT (misc_base + 0x274)
+#define SPEAR1340_CLCD_CLK_SYNT (misc_base + 0x27C)
+#define SPEAR1340_SYS_CLK_SYNT (misc_base + 0x284)
+#define SPEAR1340_GEN_CLK_SYNT0 (misc_base + 0x28C)
+#define SPEAR1340_GEN_CLK_SYNT1 (misc_base + 0x294)
+#define SPEAR1340_GEN_CLK_SYNT2 (misc_base + 0x29C)
+#define SPEAR1340_GEN_CLK_SYNT3 (misc_base + 0x304)
+#define SPEAR1340_PERIP1_CLK_ENB (misc_base + 0x30C)
#define SPEAR1340_RTC_CLK_ENB 31
#define SPEAR1340_ADC_CLK_ENB 30
#define SPEAR1340_C3_CLK_ENB 29
@@ -133,7 +132,7 @@
#define SPEAR1340_SYSROM_CLK_ENB 1
#define SPEAR1340_BUS_CLK_ENB 0
-#define SPEAR1340_PERIP2_CLK_ENB (VA_MISC_BASE + 0x310)
+#define SPEAR1340_PERIP2_CLK_ENB (misc_base + 0x310)
#define SPEAR1340_THSENS_CLK_ENB 8
#define SPEAR1340_I2S_REF_PAD_CLK_ENB 7
#define SPEAR1340_ACP_CLK_ENB 6
@@ -144,7 +143,7 @@
#define SPEAR1340_DDR_CORE_CLK_ENB 1
#define SPEAR1340_DDR_CTRL_CLK_ENB 0
-#define SPEAR1340_PERIP3_CLK_ENB (VA_MISC_BASE + 0x314)
+#define SPEAR1340_PERIP3_CLK_ENB (misc_base + 0x314)
#define SPEAR1340_PLGPIO_CLK_ENB 18
#define SPEAR1340_VIDEO_DEC_CLK_ENB 16
#define SPEAR1340_VIDEO_ENC_CLK_ENB 15
@@ -441,7 +440,7 @@
static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco2div2_clk",
"pll2_clk", };
-void __init spear1340_clk_init(void)
+void __init spear1340_clk_init(void __iomem *misc_base)
{
struct clk *clk, *clk1;
diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c
index 33d3ac5..f9ec43f 100644
--- a/drivers/clk/spear/spear3xx_clock.c
+++ b/drivers/clk/spear/spear3xx_clock.c
@@ -15,21 +15,20 @@
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/spinlock_types.h>
-#include <mach/misc_regs.h>
#include "clk.h"
static DEFINE_SPINLOCK(_lock);
-#define PLL1_CTR (MISC_BASE + 0x008)
-#define PLL1_FRQ (MISC_BASE + 0x00C)
-#define PLL2_CTR (MISC_BASE + 0x014)
-#define PLL2_FRQ (MISC_BASE + 0x018)
-#define PLL_CLK_CFG (MISC_BASE + 0x020)
+#define PLL1_CTR (misc_base + 0x008)
+#define PLL1_FRQ (misc_base + 0x00C)
+#define PLL2_CTR (misc_base + 0x014)
+#define PLL2_FRQ (misc_base + 0x018)
+#define PLL_CLK_CFG (misc_base + 0x020)
/* PLL_CLK_CFG register masks */
#define MCTR_CLK_SHIFT 28
#define MCTR_CLK_MASK 3
-#define CORE_CLK_CFG (MISC_BASE + 0x024)
+#define CORE_CLK_CFG (misc_base + 0x024)
/* CORE CLK CFG register masks */
#define GEN_SYNTH2_3_CLK_SHIFT 18
#define GEN_SYNTH2_3_CLK_MASK 1
@@ -39,7 +38,7 @@
#define PCLK_RATIO_SHIFT 8
#define PCLK_RATIO_MASK 2
-#define PERIP_CLK_CFG (MISC_BASE + 0x028)
+#define PERIP_CLK_CFG (misc_base + 0x028)
/* PERIP_CLK_CFG register masks */
#define UART_CLK_SHIFT 4
#define UART_CLK_MASK 1
@@ -50,7 +49,7 @@
#define GPT2_CLK_SHIFT 12
#define GPT_CLK_MASK 1
-#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
+#define PERIP1_CLK_ENB (misc_base + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART_CLK_ENB 3
#define SSP_CLK_ENB 5
@@ -69,7 +68,7 @@
#define USBH_CLK_ENB 25
#define C3_CLK_ENB 31
-#define RAS_CLK_ENB (MISC_BASE + 0x034)
+#define RAS_CLK_ENB (misc_base + 0x034)
#define RAS_AHB_CLK_ENB 0
#define RAS_PLL1_CLK_ENB 1
#define RAS_APB_CLK_ENB 2
@@ -82,20 +81,20 @@
#define RAS_SYNT2_CLK_ENB 10
#define RAS_SYNT3_CLK_ENB 11
-#define PRSC0_CLK_CFG (MISC_BASE + 0x044)
-#define PRSC1_CLK_CFG (MISC_BASE + 0x048)
-#define PRSC2_CLK_CFG (MISC_BASE + 0x04C)
-#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+#define PRSC0_CLK_CFG (misc_base + 0x044)
+#define PRSC1_CLK_CFG (misc_base + 0x048)
+#define PRSC2_CLK_CFG (misc_base + 0x04C)
+#define AMEM_CLK_CFG (misc_base + 0x050)
#define AMEM_CLK_ENB 0
-#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
-#define UART_CLK_SYNT (MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
-#define GEN0_CLK_SYNT (MISC_BASE + 0x06C)
-#define GEN1_CLK_SYNT (MISC_BASE + 0x070)
-#define GEN2_CLK_SYNT (MISC_BASE + 0x074)
-#define GEN3_CLK_SYNT (MISC_BASE + 0x078)
+#define CLCD_CLK_SYNT (misc_base + 0x05C)
+#define FIRDA_CLK_SYNT (misc_base + 0x060)
+#define UART_CLK_SYNT (misc_base + 0x064)
+#define GMAC_CLK_SYNT (misc_base + 0x068)
+#define GEN0_CLK_SYNT (misc_base + 0x06C)
+#define GEN1_CLK_SYNT (misc_base + 0x070)
+#define GEN2_CLK_SYNT (misc_base + 0x074)
+#define GEN3_CLK_SYNT (misc_base + 0x078)
/* pll rate configuration table, in ascending order of rates */
static struct pll_rate_tbl pll_rtbl[] = {
@@ -211,6 +210,17 @@
/* array of all spear 320 clock lookups */
#ifdef CONFIG_MACH_SPEAR320
+
+#define SPEAR320_CONTROL_REG (soc_config_base + 0x0000)
+#define SPEAR320_EXT_CTRL_REG (soc_config_base + 0x0018)
+
+ #define SPEAR320_UARTX_PCLK_MASK 0x1
+ #define SPEAR320_UART2_PCLK_SHIFT 8
+ #define SPEAR320_UART3_PCLK_SHIFT 9
+ #define SPEAR320_UART4_PCLK_SHIFT 10
+ #define SPEAR320_UART5_PCLK_SHIFT 11
+ #define SPEAR320_UART6_PCLK_SHIFT 12
+ #define SPEAR320_RS485_PCLK_SHIFT 13
#define SMII_PCLK_SHIFT 18
#define SMII_PCLK_MASK 2
#define SMII_PCLK_VAL_PAD 0x0
@@ -235,7 +245,7 @@
"ras_syn0_gclk", };
static const char *uartx_parents[] = { "ras_syn1_gclk", "ras_apb_clk", };
-static void __init spear320_clk_init(void)
+static void __init spear320_clk_init(void __iomem *soc_config_base)
{
struct clk *clk;
@@ -362,7 +372,7 @@
static inline void spear320_clk_init(void) { }
#endif
-void __init spear3xx_clk_init(void)
+void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_base)
{
struct clk *clk, *clk1;
@@ -634,5 +644,5 @@
else if (of_machine_is_compatible("st,spear310"))
spear310_clk_init();
else if (of_machine_is_compatible("st,spear320"))
- spear320_clk_init();
+ spear320_clk_init(soc_config_base);
}
diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c
index e862a33..9406f24 100644
--- a/drivers/clk/spear/spear6xx_clock.c
+++ b/drivers/clk/spear/spear6xx_clock.c
@@ -13,28 +13,27 @@
#include <linux/clkdev.h>
#include <linux/io.h>
#include <linux/spinlock_types.h>
-#include <mach/misc_regs.h>
#include "clk.h"
static DEFINE_SPINLOCK(_lock);
-#define PLL1_CTR (MISC_BASE + 0x008)
-#define PLL1_FRQ (MISC_BASE + 0x00C)
-#define PLL2_CTR (MISC_BASE + 0x014)
-#define PLL2_FRQ (MISC_BASE + 0x018)
-#define PLL_CLK_CFG (MISC_BASE + 0x020)
+#define PLL1_CTR (misc_base + 0x008)
+#define PLL1_FRQ (misc_base + 0x00C)
+#define PLL2_CTR (misc_base + 0x014)
+#define PLL2_FRQ (misc_base + 0x018)
+#define PLL_CLK_CFG (misc_base + 0x020)
/* PLL_CLK_CFG register masks */
#define MCTR_CLK_SHIFT 28
#define MCTR_CLK_MASK 3
-#define CORE_CLK_CFG (MISC_BASE + 0x024)
+#define CORE_CLK_CFG (misc_base + 0x024)
/* CORE CLK CFG register masks */
#define HCLK_RATIO_SHIFT 10
#define HCLK_RATIO_MASK 2
#define PCLK_RATIO_SHIFT 8
#define PCLK_RATIO_MASK 2
-#define PERIP_CLK_CFG (MISC_BASE + 0x028)
+#define PERIP_CLK_CFG (misc_base + 0x028)
/* PERIP_CLK_CFG register masks */
#define CLCD_CLK_SHIFT 2
#define CLCD_CLK_MASK 2
@@ -48,7 +47,7 @@
#define GPT3_CLK_SHIFT 12
#define GPT_CLK_MASK 1
-#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
+#define PERIP1_CLK_ENB (misc_base + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART0_CLK_ENB 3
#define UART1_CLK_ENB 4
@@ -74,13 +73,13 @@
#define USBH0_CLK_ENB 25
#define USBH1_CLK_ENB 26
-#define PRSC0_CLK_CFG (MISC_BASE + 0x044)
-#define PRSC1_CLK_CFG (MISC_BASE + 0x048)
-#define PRSC2_CLK_CFG (MISC_BASE + 0x04C)
+#define PRSC0_CLK_CFG (misc_base + 0x044)
+#define PRSC1_CLK_CFG (misc_base + 0x048)
+#define PRSC2_CLK_CFG (misc_base + 0x04C)
-#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
-#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define CLCD_CLK_SYNT (misc_base + 0x05C)
+#define FIRDA_CLK_SYNT (misc_base + 0x060)
+#define UART_CLK_SYNT (misc_base + 0x064)
/* vco rate configuration table, in ascending order of rates */
static struct pll_rate_tbl pll_rtbl[] = {
@@ -115,7 +114,7 @@
{.mscale = 1, .nscale = 0}, /* 83 MHz */
};
-void __init spear6xx_clk_init(void)
+void __init spear6xx_clk_init(void __iomem *misc_base)
{
struct clk *clk, *clk1;
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index b0405b6..8292a00 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -710,7 +710,7 @@
clks[pll_a_out0] = clk;
/* PLLE */
- clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, NULL,
+ clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, pmc_base,
0, 100000000, &pll_e_params,
0, pll_e_freq_table, NULL);
clk_register_clkdev(clk, "pll_e", NULL);
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 4e5b7fb..37d23a0 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -178,10 +178,16 @@
static int cpu0_cpufreq_probe(struct platform_device *pdev)
{
- struct device_node *np;
+ struct device_node *np, *parent;
int ret;
- for_each_child_of_node(of_find_node_by_path("/cpus"), np) {
+ parent = of_find_node_by_path("/cpus");
+ if (!parent) {
+ pr_err("failed to find OF /cpus\n");
+ return -ENOENT;
+ }
+
+ for_each_child_of_node(parent, np) {
if (of_get_property(np, "operating-points", NULL))
break;
}
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
index 46bde01..cc4bd2f 100644
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -14,8 +14,8 @@
* published by the Free Software Foundation.
*/
-#ifndef _CPUFREQ_GOVERNER_H
-#define _CPUFREQ_GOVERNER_H
+#ifndef _CPUFREQ_GOVERNOR_H
+#define _CPUFREQ_GOVERNOR_H
#include <linux/cpufreq.h>
#include <linux/kobject.h>
@@ -175,4 +175,4 @@
unsigned int sampling_rate);
int cpufreq_governor_dbs(struct dbs_data *dbs_data,
struct cpufreq_policy *policy, unsigned int event);
-#endif /* _CPUFREQ_GOVERNER_H */
+#endif /* _CPUFREQ_GOVERNOR_H */
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 80b6997..aeaea32 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -83,6 +83,7 @@
config DW_DMAC
tristate "Synopsys DesignWare AHB DMA support"
+ depends on GENERIC_HARDIRQS
select DMA_ENGINE
default y if CPU_AT32AP7000
help
diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c
index cdae207..6c3fca9 100644
--- a/drivers/eisa/pci_eisa.c
+++ b/drivers/eisa/pci_eisa.c
@@ -19,10 +19,10 @@
/* There is only *one* pci_eisa device per machine, right ? */
static struct eisa_root_device pci_eisa_root;
-static int __init pci_eisa_init(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __init pci_eisa_init(struct pci_dev *pdev)
{
- int rc;
+ int rc, i;
+ struct resource *res, *bus_res = NULL;
if ((rc = pci_enable_device (pdev))) {
printk (KERN_ERR "pci_eisa : Could not enable device %s\n",
@@ -30,9 +30,30 @@
return rc;
}
+ /*
+ * The Intel 82375 PCI-EISA bridge is a subtractive-decode PCI
+ * device, so the resources available on EISA are the same as those
+ * available on the 82375 bus. This works the same as a PCI-PCI
+ * bridge in subtractive-decode mode (see pci_read_bridge_bases()).
+ * We assume other PCI-EISA bridges are similar.
+ *
+ * eisa_root_register() can only deal with a single io port resource,
+ * so we use the first valid io port resource.
+ */
+ pci_bus_for_each_resource(pdev->bus, res, i)
+ if (res && (res->flags & IORESOURCE_IO)) {
+ bus_res = res;
+ break;
+ }
+
+ if (!bus_res) {
+ dev_err(&pdev->dev, "No resources available\n");
+ return -1;
+ }
+
pci_eisa_root.dev = &pdev->dev;
- pci_eisa_root.res = pdev->bus->resource[0];
- pci_eisa_root.bus_base_addr = pdev->bus->resource[0]->start;
+ pci_eisa_root.res = bus_res;
+ pci_eisa_root.bus_base_addr = bus_res->start;
pci_eisa_root.slots = EISA_MAX_SLOTS;
pci_eisa_root.dma_mask = pdev->dma_mask;
dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root);
@@ -45,22 +66,26 @@
return 0;
}
-static struct pci_device_id pci_eisa_pci_tbl[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_BRIDGE_EISA << 8, 0xffff00, 0 },
- { 0, }
-};
-
-static struct pci_driver __refdata pci_eisa_driver = {
- .name = "pci_eisa",
- .id_table = pci_eisa_pci_tbl,
- .probe = pci_eisa_init,
-};
-
-static int __init pci_eisa_init_module (void)
+/*
+ * We have to call pci_eisa_init_early() before pnpacpi_init()/isapnp_init().
+ * Otherwise pnp resource will get enabled early and could prevent eisa
+ * to be initialized.
+ * Also need to make sure pci_eisa_init_early() is called after
+ * x86/pci_subsys_init().
+ * So need to use subsys_initcall_sync with it.
+ */
+static int __init pci_eisa_init_early(void)
{
- return pci_register_driver (&pci_eisa_driver);
-}
+ struct pci_dev *dev = NULL;
+ int ret;
-device_initcall(pci_eisa_init_module);
-MODULE_DEVICE_TABLE(pci, pci_eisa_pci_tbl);
+ for_each_pci_dev(dev)
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_EISA) {
+ ret = pci_eisa_init(dev);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+subsys_initcall_sync(pci_eisa_init_early);
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index f9dbd50..de3c317 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -214,7 +214,7 @@
* If it can't be trusted, assume that the pin can be used as a GPIO.
*/
if (ichx_priv.desc->use_sel_ignore[nr / 32] & (1 << (nr & 0x1f)))
- return 1;
+ return 0;
return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV;
}
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index 770476a..3ce5bc3 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -307,11 +307,15 @@
.xlate = irq_domain_xlate_twocell,
};
-static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
+static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio,
+ struct device_node *np)
{
- int base = stmpe_gpio->irq_base;
+ int base = 0;
- stmpe_gpio->domain = irq_domain_add_simple(NULL,
+ if (!np)
+ base = stmpe_gpio->irq_base;
+
+ stmpe_gpio->domain = irq_domain_add_simple(np,
stmpe_gpio->chip.ngpio, base,
&stmpe_gpio_irq_simple_ops, stmpe_gpio);
if (!stmpe_gpio->domain) {
@@ -346,6 +350,9 @@
stmpe_gpio->chip = template_chip;
stmpe_gpio->chip.ngpio = stmpe->num_gpios;
stmpe_gpio->chip.dev = &pdev->dev;
+#ifdef CONFIG_OF
+ stmpe_gpio->chip.of_node = np;
+#endif
stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
if (pdata)
@@ -366,7 +373,7 @@
goto out_free;
if (irq >= 0) {
- ret = stmpe_gpio_irq_init(stmpe_gpio);
+ ret = stmpe_gpio_irq_init(stmpe_gpio, np);
if (ret)
goto out_disable;
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 792c3e3..dd64a06 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2326,7 +2326,6 @@
fb = dev->mode_config.funcs->fb_create(dev, file_priv, &r);
if (IS_ERR(fb)) {
DRM_DEBUG_KMS("could not create framebuffer\n");
- drm_modeset_unlock_all(dev);
return PTR_ERR(fb);
}
@@ -2506,7 +2505,6 @@
fb = dev->mode_config.funcs->fb_create(dev, file_priv, r);
if (IS_ERR(fb)) {
DRM_DEBUG_KMS("could not create framebuffer\n");
- drm_modeset_unlock_all(dev);
return PTR_ERR(fb);
}
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index 13fdcd1..429e07d 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -123,6 +123,7 @@
int retcode = 0;
int need_setup = 0;
struct address_space *old_mapping;
+ struct address_space *old_imapping;
minor = idr_find(&drm_minors_idr, minor_id);
if (!minor)
@@ -137,6 +138,7 @@
if (!dev->open_count++)
need_setup = 1;
mutex_lock(&dev->struct_mutex);
+ old_imapping = inode->i_mapping;
old_mapping = dev->dev_mapping;
if (old_mapping == NULL)
dev->dev_mapping = &inode->i_data;
@@ -159,8 +161,8 @@
err_undo:
mutex_lock(&dev->struct_mutex);
- filp->f_mapping = old_mapping;
- inode->i_mapping = old_mapping;
+ filp->f_mapping = old_imapping;
+ inode->i_mapping = old_imapping;
iput(container_of(dev->dev_mapping, struct inode, i_data));
dev->dev_mapping = old_mapping;
mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 3b11ab0..9a48e1a 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -57,7 +57,7 @@
if (eb == NULL) {
int size = args->buffer_count;
int count = PAGE_SIZE / sizeof(struct hlist_head) / 2;
- BUILD_BUG_ON(!is_power_of_2(PAGE_SIZE / sizeof(struct hlist_head)));
+ BUILD_BUG_ON_NOT_POWER_OF_2(PAGE_SIZE / sizeof(struct hlist_head));
while (count > 2*size)
count >>= 1;
eb = kzalloc(count*sizeof(struct hlist_head) +
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 32a3693..1ce45a0 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -45,6 +45,9 @@
struct intel_crt {
struct intel_encoder base;
+ /* DPMS state is stored in the connector, which we need in the
+ * encoder's enable/disable callbacks */
+ struct intel_connector *connector;
bool force_hotplug_required;
u32 adpa_reg;
};
@@ -81,29 +84,6 @@
return true;
}
-static void intel_disable_crt(struct intel_encoder *encoder)
-{
- struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
- struct intel_crt *crt = intel_encoder_to_crt(encoder);
- u32 temp;
-
- temp = I915_READ(crt->adpa_reg);
- temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
- temp &= ~ADPA_DAC_ENABLE;
- I915_WRITE(crt->adpa_reg, temp);
-}
-
-static void intel_enable_crt(struct intel_encoder *encoder)
-{
- struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
- struct intel_crt *crt = intel_encoder_to_crt(encoder);
- u32 temp;
-
- temp = I915_READ(crt->adpa_reg);
- temp |= ADPA_DAC_ENABLE;
- I915_WRITE(crt->adpa_reg, temp);
-}
-
/* Note: The caller is required to filter out dpms modes not supported by the
* platform. */
static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
@@ -135,6 +115,19 @@
I915_WRITE(crt->adpa_reg, temp);
}
+static void intel_disable_crt(struct intel_encoder *encoder)
+{
+ intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void intel_enable_crt(struct intel_encoder *encoder)
+{
+ struct intel_crt *crt = intel_encoder_to_crt(encoder);
+
+ intel_crt_set_dpms(encoder, crt->connector->base.dpms);
+}
+
+
static void intel_crt_dpms(struct drm_connector *connector, int mode)
{
struct drm_device *dev = connector->dev;
@@ -746,6 +739,7 @@
}
connector = &intel_connector->base;
+ crt->connector = intel_connector;
drm_connector_init(dev, &intel_connector->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index d7d4afe..8fc93f9 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2559,12 +2559,15 @@
{
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
struct intel_dp *intel_dp = &intel_dig_port->dp;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
i2c_del_adapter(&intel_dp->adapter);
drm_encoder_cleanup(encoder);
if (is_edp(intel_dp)) {
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
+ mutex_lock(&dev->mode_config.mutex);
ironlake_panel_vdd_off_sync(intel_dp);
+ mutex_unlock(&dev->mode_config.mutex);
}
kfree(intel_dig_port);
}
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
index e816f06..0e2c1a4 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
@@ -248,6 +248,22 @@
}
}
+static void
+nouveau_bios_shadow_platform(struct nouveau_bios *bios)
+{
+ struct pci_dev *pdev = nv_device(bios)->pdev;
+ size_t size;
+
+ void __iomem *rom = pci_platform_rom(pdev, &size);
+ if (rom && size) {
+ bios->data = kmalloc(size, GFP_KERNEL);
+ if (bios->data) {
+ memcpy_fromio(bios->data, rom, size);
+ bios->size = size;
+ }
+ }
+}
+
static int
nouveau_bios_score(struct nouveau_bios *bios, const bool writeable)
{
@@ -288,6 +304,7 @@
{ "PROM", nouveau_bios_shadow_prom, false, 0, 0, NULL },
{ "ACPI", nouveau_bios_shadow_acpi, true, 0, 0, NULL },
{ "PCIROM", nouveau_bios_shadow_pci, true, 0, 0, NULL },
+ { "PLATFORM", nouveau_bios_shadow_platform, true, 0, 0, NULL },
{}
};
struct methods *mthd, *best;
diff --git a/drivers/gpu/drm/nouveau/nouveau_abi16.c b/drivers/gpu/drm/nouveau/nouveau_abi16.c
index 3b6dc88..5eb3e0d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_abi16.c
+++ b/drivers/gpu/drm/nouveau/nouveau_abi16.c
@@ -391,7 +391,7 @@
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_device *device = nv_device(drm->device);
struct nouveau_abi16 *abi16 = nouveau_abi16_get(file_priv, dev);
- struct nouveau_abi16_chan *chan, *temp;
+ struct nouveau_abi16_chan *chan = NULL, *temp;
struct nouveau_abi16_ntfy *ntfy;
struct nouveau_object *object;
struct nv_dma_class args = {};
@@ -404,10 +404,11 @@
if (unlikely(nv_device(abi16->device)->card_type >= NV_C0))
return nouveau_abi16_put(abi16, -EINVAL);
- list_for_each_entry_safe(chan, temp, &abi16->channels, head) {
- if (chan->chan->handle == (NVDRM_CHAN | info->channel))
+ list_for_each_entry(temp, &abi16->channels, head) {
+ if (temp->chan->handle == (NVDRM_CHAN | info->channel)) {
+ chan = temp;
break;
- chan = NULL;
+ }
}
if (!chan)
@@ -459,17 +460,18 @@
{
struct drm_nouveau_gpuobj_free *fini = data;
struct nouveau_abi16 *abi16 = nouveau_abi16_get(file_priv, dev);
- struct nouveau_abi16_chan *chan, *temp;
+ struct nouveau_abi16_chan *chan = NULL, *temp;
struct nouveau_abi16_ntfy *ntfy;
int ret;
if (unlikely(!abi16))
return -ENOMEM;
- list_for_each_entry_safe(chan, temp, &abi16->channels, head) {
- if (chan->chan->handle == (NVDRM_CHAN | fini->channel))
+ list_for_each_entry(temp, &abi16->channels, head) {
+ if (temp->chan->handle == (NVDRM_CHAN | fini->channel)) {
+ chan = temp;
break;
- chan = NULL;
+ }
}
if (!chan)
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index d109936..c95decf 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -72,11 +72,25 @@
static struct drm_driver driver;
static int
+nouveau_drm_vblank_handler(struct nouveau_eventh *event, int head)
+{
+ struct nouveau_drm *drm =
+ container_of(event, struct nouveau_drm, vblank[head]);
+ drm_handle_vblank(drm->dev, head);
+ return NVKM_EVENT_KEEP;
+}
+
+static int
nouveau_drm_vblank_enable(struct drm_device *dev, int head)
{
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_disp *pdisp = nouveau_disp(drm->device);
- nouveau_event_get(pdisp->vblank, head, &drm->vblank);
+
+ if (WARN_ON_ONCE(head > ARRAY_SIZE(drm->vblank)))
+ return -EIO;
+ WARN_ON_ONCE(drm->vblank[head].func);
+ drm->vblank[head].func = nouveau_drm_vblank_handler;
+ nouveau_event_get(pdisp->vblank, head, &drm->vblank[head]);
return 0;
}
@@ -85,16 +99,11 @@
{
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_disp *pdisp = nouveau_disp(drm->device);
- nouveau_event_put(pdisp->vblank, head, &drm->vblank);
-}
-
-static int
-nouveau_drm_vblank_handler(struct nouveau_eventh *event, int head)
-{
- struct nouveau_drm *drm =
- container_of(event, struct nouveau_drm, vblank);
- drm_handle_vblank(drm->dev, head);
- return NVKM_EVENT_KEEP;
+ if (drm->vblank[head].func)
+ nouveau_event_put(pdisp->vblank, head, &drm->vblank[head]);
+ else
+ WARN_ON_ONCE(1);
+ drm->vblank[head].func = NULL;
}
static u64
@@ -292,7 +301,6 @@
dev->dev_private = drm;
drm->dev = dev;
- drm->vblank.func = nouveau_drm_vblank_handler;
INIT_LIST_HEAD(&drm->clients);
spin_lock_init(&drm->tile.lock);
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.h b/drivers/gpu/drm/nouveau/nouveau_drm.h
index b25df37..9c39baf 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.h
@@ -113,7 +113,7 @@
struct nvbios vbios;
struct nouveau_display *display;
struct backlight_device *backlight;
- struct nouveau_eventh vblank;
+ struct nouveau_eventh vblank[4];
/* power management */
struct nouveau_pm *pm;
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index b801591..fa3c56f 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -99,6 +99,29 @@
return true;
}
+static bool radeon_read_platform_bios(struct radeon_device *rdev)
+{
+ uint8_t __iomem *bios;
+ size_t size;
+
+ rdev->bios = NULL;
+
+ bios = pci_platform_rom(rdev->pdev, &size);
+ if (!bios) {
+ return false;
+ }
+
+ if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) {
+ return false;
+ }
+ rdev->bios = kmemdup(bios, size, GFP_KERNEL);
+ if (rdev->bios == NULL) {
+ return false;
+ }
+
+ return true;
+}
+
#ifdef CONFIG_ACPI
/* ATRM is used to get the BIOS on the discrete cards in
* dual-gpu systems.
@@ -620,6 +643,9 @@
if (r == false) {
r = radeon_read_disabled_bios(rdev);
}
+ if (r == false) {
+ r = radeon_read_platform_bios(rdev);
+ }
if (r == false || rdev->bios == NULL) {
DRM_ERROR("Unable to locate a BIOS ROM\n");
rdev->bios = NULL;
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 512b01c..aa341d1 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2077,7 +2077,6 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
- { HID_USB_DEVICE(USB_VENDOR_ID_MASTERKIT, USB_DEVICE_ID_MASTERKIT_MA901RADIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
@@ -2244,6 +2243,18 @@
hdev->product <= USB_DEVICE_ID_VELLEMAN_K8061_LAST))
return true;
break;
+ case USB_VENDOR_ID_ATMEL_V_USB:
+ /* Masterkit MA901 usb radio based on Atmel tiny85 chip and
+ * it has the same USB ID as many Atmel V-USB devices. This
+ * usb radio is handled by radio-ma901.c driver so we want
+ * ignore the hid. Check the name, bus, product and ignore
+ * if we have MA901 usb radio.
+ */
+ if (hdev->product == USB_DEVICE_ID_ATMEL_V_USB &&
+ hdev->bus == BUS_USB &&
+ strncmp(hdev->name, "www.masterkit.ru MA901", 22) == 0)
+ return true;
+ break;
}
if (hdev->type == HID_TYPE_USBMOUSE &&
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index c438877..5309fd5 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -158,6 +158,8 @@
#define USB_VENDOR_ID_ATMEL 0x03eb
#define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c
#define USB_DEVICE_ID_ATMEL_MXT_DIGITIZER 0x2118
+#define USB_VENDOR_ID_ATMEL_V_USB 0x16c0
+#define USB_DEVICE_ID_ATMEL_V_USB 0x05df
#define USB_VENDOR_ID_AUREAL 0x0755
#define USB_DEVICE_ID_AUREAL_W01RN 0x2626
@@ -557,9 +559,6 @@
#define USB_VENDOR_ID_MADCATZ 0x0738
#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540
-#define USB_VENDOR_ID_MASTERKIT 0x16c0
-#define USB_DEVICE_ID_MASTERKIT_MA901RADIO 0x05df
-
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index f7f113b..a8ce442 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -462,6 +462,21 @@
return 0;
}
+static void magicmouse_input_configured(struct hid_device *hdev,
+ struct hid_input *hi)
+
+{
+ struct magicmouse_sc *msc = hid_get_drvdata(hdev);
+
+ int ret = magicmouse_setup_input(msc->input, hdev);
+ if (ret) {
+ hid_err(hdev, "magicmouse setup input failed (%d)\n", ret);
+ /* clean msc->input to notify probe() of the failure */
+ msc->input = NULL;
+ }
+}
+
+
static int magicmouse_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
@@ -493,15 +508,10 @@
goto err_free;
}
- /* We do this after hid-input is done parsing reports so that
- * hid-input uses the most natural button and axis IDs.
- */
- if (msc->input) {
- ret = magicmouse_setup_input(msc->input, hdev);
- if (ret) {
- hid_err(hdev, "magicmouse setup input failed (%d)\n", ret);
- goto err_stop_hw;
- }
+ if (!msc->input) {
+ hid_err(hdev, "magicmouse input not registered\n");
+ ret = -ENOMEM;
+ goto err_stop_hw;
}
if (id->product == USB_DEVICE_ID_APPLE_MAGICMOUSE)
@@ -568,6 +578,7 @@
.remove = magicmouse_remove,
.raw_event = magicmouse_raw_event,
.input_mapping = magicmouse_input_mapping,
+ .input_configured = magicmouse_input_configured,
};
module_hid_driver(magicmouse_driver);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 0ceb6e1..e3085c4 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -182,7 +182,6 @@
adap->algo = &i2c_dw_algo;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
- ACPI_HANDLE_SET(&adap->dev, ACPI_HANDLE(&pdev->dev));
r = i2c_add_numbered_adapter(adap);
if (r) {
diff --git a/drivers/infiniband/hw/qib/qib_sd7220.c b/drivers/infiniband/hw/qib/qib_sd7220.c
index 08a6c6d..911205d 100644
--- a/drivers/infiniband/hw/qib/qib_sd7220.c
+++ b/drivers/infiniband/hw/qib/qib_sd7220.c
@@ -44,7 +44,7 @@
#include "qib.h"
#include "qib_7220.h"
-#define SD7220_FW_NAME "intel/sd7220.fw"
+#define SD7220_FW_NAME "qlogic/sd7220.fw"
MODULE_FIRMWARE(SD7220_FW_NAME);
/*
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index acf9895..154722a 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o
+obj-$(CONFIG_ARCH_MVEBU) += irq-armada-370-xp.o
obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o
obj-$(CONFIG_METAG) += irq-metag-ext.o
obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
similarity index 88%
rename from arch/arm/mach-mvebu/irq-armada-370-xp.c
rename to drivers/irqchip/irq-armada-370-xp.c
index 274ff58..ad1e642 100644
--- a/arch/arm/mach-mvebu/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -25,7 +25,9 @@
#include <asm/mach/arch.h>
#include <asm/exception.h>
#include <asm/smp_plat.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/irq.h>
+
+#include "irqchip.h"
/* Interrupt Controller Registers Map */
#define ARMADA_370_XP_INT_SET_MASK_OFFS (0x48)
@@ -44,7 +46,11 @@
#define ARMADA_370_XP_MAX_PER_CPU_IRQS (28)
-#define ACTIVE_DOORBELLS (8)
+#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ (5)
+
+#define IPI_DOORBELL_START (0)
+#define IPI_DOORBELL_END (8)
+#define IPI_DOORBELL_MASK 0xFF
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -62,7 +68,7 @@
#ifdef CONFIG_SMP
irq_hw_number_t hwirq = irqd_to_hwirq(d);
- if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+ if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
writel(hwirq, main_int_base +
ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
else
@@ -79,7 +85,7 @@
#ifdef CONFIG_SMP
irq_hw_number_t hwirq = irqd_to_hwirq(d);
- if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+ if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
writel(hwirq, main_int_base +
ARMADA_370_XP_INT_SET_ENABLE_OFFS);
else
@@ -147,7 +153,7 @@
writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
irq_set_status_flags(virq, IRQ_LEVEL);
- if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
+ if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
irq_set_percpu_devid(virq);
irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
handle_percpu_devid_irq);
@@ -188,7 +194,7 @@
writel(0, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
/* Enable first 8 IPIs */
- writel((1 << ACTIVE_DOORBELLS) - 1, per_cpu_int_base +
+ writel(IPI_DOORBELL_MASK, per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
/* Unmask IPI interrupt */
@@ -201,6 +207,50 @@
.xlate = irq_domain_xlate_onecell,
};
+static asmlinkage void __exception_irq_entry
+armada_370_xp_handle_irq(struct pt_regs *regs)
+{
+ u32 irqstat, irqnr;
+
+ do {
+ irqstat = readl_relaxed(per_cpu_int_base +
+ ARMADA_370_XP_CPU_INTACK_OFFS);
+ irqnr = irqstat & 0x3FF;
+
+ if (irqnr > 1022)
+ break;
+
+ if (irqnr > 0) {
+ irqnr = irq_find_mapping(armada_370_xp_mpic_domain,
+ irqnr);
+ handle_IRQ(irqnr, regs);
+ continue;
+ }
+#ifdef CONFIG_SMP
+ /* IPI Handling */
+ if (irqnr == 0) {
+ u32 ipimask, ipinr;
+
+ ipimask = readl_relaxed(per_cpu_int_base +
+ ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
+ & IPI_DOORBELL_MASK;
+
+ writel(~IPI_DOORBELL_MASK, per_cpu_int_base +
+ ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
+
+ /* Handle all pending doorbells */
+ for (ipinr = IPI_DOORBELL_START;
+ ipinr < IPI_DOORBELL_END; ipinr++) {
+ if (ipimask & (0x1 << ipinr))
+ handle_IPI(ipinr, regs);
+ }
+ continue;
+ }
+#endif
+
+ } while (1);
+}
+
static int __init armada_370_xp_mpic_of_init(struct device_node *node,
struct device_node *parent)
{
@@ -236,61 +286,9 @@
#endif
+ set_handle_irq(armada_370_xp_handle_irq);
+
return 0;
}
-asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs
- *regs)
-{
- u32 irqstat, irqnr;
-
- do {
- irqstat = readl_relaxed(per_cpu_int_base +
- ARMADA_370_XP_CPU_INTACK_OFFS);
- irqnr = irqstat & 0x3FF;
-
- if (irqnr > 1022)
- break;
-
- if (irqnr > 0) {
- irqnr = irq_find_mapping(armada_370_xp_mpic_domain,
- irqnr);
- handle_IRQ(irqnr, regs);
- continue;
- }
-#ifdef CONFIG_SMP
- /* IPI Handling */
- if (irqnr == 0) {
- u32 ipimask, ipinr;
-
- ipimask = readl_relaxed(per_cpu_int_base +
- ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
- & 0xFF;
-
- writel(0x0, per_cpu_int_base +
- ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
-
- /* Handle all pending doorbells */
- for (ipinr = 0; ipinr < ACTIVE_DOORBELLS; ipinr++) {
- if (ipimask & (0x1 << ipinr))
- handle_IPI(ipinr, regs);
- }
- continue;
- }
-#endif
-
- } while (1);
-}
-
-static const struct of_device_id mpic_of_match[] __initconst = {
- {.compatible = "marvell,mpic", .data = armada_370_xp_mpic_of_init},
- {},
-};
-
-void __init armada_370_xp_init_irq(void)
-{
- of_irq_init(mpic_of_match);
-#ifdef CONFIG_CACHE_L2X0
- l2x0_of_init(0, ~0UL);
-#endif
-}
+IRQCHIP_DECLARE(armada_370_xp_mpic, "marvell,mpic", armada_370_xp_mpic_of_init);
diff --git a/drivers/md/dm-cache-target.c b/drivers/md/dm-cache-target.c
index 66120bd..1074409 100644
--- a/drivers/md/dm-cache-target.c
+++ b/drivers/md/dm-cache-target.c
@@ -6,6 +6,7 @@
#include "dm.h"
#include "dm-bio-prison.h"
+#include "dm-bio-record.h"
#include "dm-cache-metadata.h"
#include <linux/dm-io.h>
@@ -201,10 +202,15 @@
unsigned req_nr:2;
struct dm_deferred_entry *all_io_entry;
- /* writethrough fields */
+ /*
+ * writethrough fields. These MUST remain at the end of this
+ * structure and the 'cache' member must be the first as it
+ * is used to determine the offsetof the writethrough fields.
+ */
struct cache *cache;
dm_cblock_t cblock;
bio_end_io_t *saved_bi_end_io;
+ struct dm_bio_details bio_details;
};
struct dm_cache_migration {
@@ -513,16 +519,28 @@
/*----------------------------------------------------------------
* Per bio data
*--------------------------------------------------------------*/
-static struct per_bio_data *get_per_bio_data(struct bio *bio)
+
+/*
+ * If using writeback, leave out struct per_bio_data's writethrough fields.
+ */
+#define PB_DATA_SIZE_WB (offsetof(struct per_bio_data, cache))
+#define PB_DATA_SIZE_WT (sizeof(struct per_bio_data))
+
+static size_t get_per_bio_data_size(struct cache *cache)
{
- struct per_bio_data *pb = dm_per_bio_data(bio, sizeof(struct per_bio_data));
+ return cache->features.write_through ? PB_DATA_SIZE_WT : PB_DATA_SIZE_WB;
+}
+
+static struct per_bio_data *get_per_bio_data(struct bio *bio, size_t data_size)
+{
+ struct per_bio_data *pb = dm_per_bio_data(bio, data_size);
BUG_ON(!pb);
return pb;
}
-static struct per_bio_data *init_per_bio_data(struct bio *bio)
+static struct per_bio_data *init_per_bio_data(struct bio *bio, size_t data_size)
{
- struct per_bio_data *pb = get_per_bio_data(bio);
+ struct per_bio_data *pb = get_per_bio_data(bio, data_size);
pb->tick = false;
pb->req_nr = dm_bio_get_target_bio_nr(bio);
@@ -556,7 +574,8 @@
static void check_if_tick_bio_needed(struct cache *cache, struct bio *bio)
{
unsigned long flags;
- struct per_bio_data *pb = get_per_bio_data(bio);
+ size_t pb_data_size = get_per_bio_data_size(cache);
+ struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size);
spin_lock_irqsave(&cache->lock, flags);
if (cache->need_tick_bio &&
@@ -635,7 +654,7 @@
static void writethrough_endio(struct bio *bio, int err)
{
- struct per_bio_data *pb = get_per_bio_data(bio);
+ struct per_bio_data *pb = get_per_bio_data(bio, PB_DATA_SIZE_WT);
bio->bi_end_io = pb->saved_bi_end_io;
if (err) {
@@ -643,6 +662,7 @@
return;
}
+ dm_bio_restore(&pb->bio_details, bio);
remap_to_cache(pb->cache, bio, pb->cblock);
/*
@@ -662,11 +682,12 @@
static void remap_to_origin_then_cache(struct cache *cache, struct bio *bio,
dm_oblock_t oblock, dm_cblock_t cblock)
{
- struct per_bio_data *pb = get_per_bio_data(bio);
+ struct per_bio_data *pb = get_per_bio_data(bio, PB_DATA_SIZE_WT);
pb->cache = cache;
pb->cblock = cblock;
pb->saved_bi_end_io = bio->bi_end_io;
+ dm_bio_record(&pb->bio_details, bio);
bio->bi_end_io = writethrough_endio;
remap_to_origin_clear_discard(pb->cache, bio, oblock);
@@ -1035,7 +1056,8 @@
static void process_flush_bio(struct cache *cache, struct bio *bio)
{
- struct per_bio_data *pb = get_per_bio_data(bio);
+ size_t pb_data_size = get_per_bio_data_size(cache);
+ struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size);
BUG_ON(bio->bi_size);
if (!pb->req_nr)
@@ -1107,7 +1129,8 @@
dm_oblock_t block = get_bio_block(cache, bio);
struct dm_bio_prison_cell *cell_prealloc, *old_ocell, *new_ocell;
struct policy_result lookup_result;
- struct per_bio_data *pb = get_per_bio_data(bio);
+ size_t pb_data_size = get_per_bio_data_size(cache);
+ struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size);
bool discarded_block = is_discarded_oblock(cache, block);
bool can_migrate = discarded_block || spare_migration_bandwidth(cache);
@@ -1881,7 +1904,6 @@
cache->ti = ca->ti;
ti->private = cache;
- ti->per_bio_data_size = sizeof(struct per_bio_data);
ti->num_flush_bios = 2;
ti->flush_supported = true;
@@ -1890,6 +1912,7 @@
ti->discard_zeroes_data_unsupported = true;
memcpy(&cache->features, &ca->features, sizeof(cache->features));
+ ti->per_bio_data_size = get_per_bio_data_size(cache);
cache->callbacks.congested_fn = cache_is_congested;
dm_table_add_target_callbacks(ti->table, &cache->callbacks);
@@ -2092,6 +2115,7 @@
int r;
dm_oblock_t block = get_bio_block(cache, bio);
+ size_t pb_data_size = get_per_bio_data_size(cache);
bool can_migrate = false;
bool discarded_block;
struct dm_bio_prison_cell *cell;
@@ -2108,7 +2132,7 @@
return DM_MAPIO_REMAPPED;
}
- pb = init_per_bio_data(bio);
+ pb = init_per_bio_data(bio, pb_data_size);
if (bio->bi_rw & (REQ_FLUSH | REQ_FUA | REQ_DISCARD)) {
defer_bio(cache, bio);
@@ -2193,7 +2217,8 @@
{
struct cache *cache = ti->private;
unsigned long flags;
- struct per_bio_data *pb = get_per_bio_data(bio);
+ size_t pb_data_size = get_per_bio_data_size(cache);
+ struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size);
if (pb->tick) {
policy_tick(cache->policy);
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 05d7b63..a0639e7 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -204,7 +204,7 @@
config VIDEO_SH_VEU
tristate "SuperH VEU mem2mem video processing driver"
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV && VIDEO_V4L2 && GENERIC_HARDIRQS
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
diff --git a/drivers/media/radio/radio-ma901.c b/drivers/media/radio/radio-ma901.c
index c61f590..348dafc 100644
--- a/drivers/media/radio/radio-ma901.c
+++ b/drivers/media/radio/radio-ma901.c
@@ -347,9 +347,20 @@
static int usb_ma901radio_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
+ struct usb_device *dev = interface_to_usbdev(intf);
struct ma901radio_device *radio;
int retval = 0;
+ /* Masterkit MA901 usb radio has the same USB ID as many others
+ * Atmel V-USB devices. Let's make additional checks to be sure
+ * that this is our device.
+ */
+
+ if (dev->product && dev->manufacturer &&
+ (strncmp(dev->product, "MA901", 5) != 0
+ || strncmp(dev->manufacturer, "www.masterkit.ru", 16) != 0))
+ return -ENODEV;
+
radio = kzalloc(sizeof(struct ma901radio_device), GFP_KERNEL);
if (!radio) {
dev_err(&intf->dev, "kzalloc for ma901radio_device failed\n");
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6bbd90e..171b10f1 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1976,12 +1976,11 @@
return -EINVAL;
}
+ write_unlock_bh(&bond->lock);
/* unregister rx_handler early so bond_handle_frame wouldn't be called
* for this slave anymore.
*/
netdev_rx_handler_unregister(slave_dev);
- write_unlock_bh(&bond->lock);
- synchronize_net();
write_lock_bh(&bond->lock);
if (!all && !bond->params.fail_over_mac) {
@@ -4903,8 +4902,8 @@
bond_destroy_debugfs();
- rtnl_link_unregister(&bond_link_ops);
unregister_pernet_subsys(&bond_net_ops);
+ rtnl_link_unregister(&bond_link_ops);
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index db103e03..ea7a388 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -527,7 +527,7 @@
goto out;
}
if (new_value < 0) {
- pr_err("%s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
+ pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n",
bond->dev->name, new_value, INT_MAX);
ret = -EINVAL;
goto out;
@@ -542,14 +542,15 @@
pr_info("%s: Setting ARP monitoring interval to %d.\n",
bond->dev->name, new_value);
bond->params.arp_interval = new_value;
- if (bond->params.miimon) {
- pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
- bond->dev->name, bond->dev->name);
- bond->params.miimon = 0;
- }
- if (!bond->params.arp_targets[0]) {
- pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
- bond->dev->name);
+ if (new_value) {
+ if (bond->params.miimon) {
+ pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
+ bond->dev->name, bond->dev->name);
+ bond->params.miimon = 0;
+ }
+ if (!bond->params.arp_targets[0])
+ pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
+ bond->dev->name);
}
if (bond->dev->flags & IFF_UP) {
/* If the interface is up, we may need to fire off
@@ -557,10 +558,13 @@
* timer will get fired off when the open function
* is called.
*/
- cancel_delayed_work_sync(&bond->mii_work);
- queue_delayed_work(bond->wq, &bond->arp_work, 0);
+ if (!new_value) {
+ cancel_delayed_work_sync(&bond->arp_work);
+ } else {
+ cancel_delayed_work_sync(&bond->mii_work);
+ queue_delayed_work(bond->wq, &bond->arp_work, 0);
+ }
}
-
out:
rtnl_unlock();
return ret;
@@ -702,7 +706,7 @@
}
if (new_value < 0) {
pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
} else {
@@ -757,8 +761,8 @@
goto out;
}
if (new_value < 0) {
- pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n",
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
} else {
@@ -968,37 +972,37 @@
}
if (new_value < 0) {
pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
- } else {
- pr_info("%s: Setting MII monitoring interval to %d.\n",
- bond->dev->name, new_value);
- bond->params.miimon = new_value;
- if (bond->params.updelay)
- pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.updelay * bond->params.miimon);
- if (bond->params.downdelay)
- pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.downdelay * bond->params.miimon);
- if (bond->params.arp_interval) {
- pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
- bond->dev->name);
- bond->params.arp_interval = 0;
- if (bond->params.arp_validate) {
- bond->params.arp_validate =
- BOND_ARP_VALIDATE_NONE;
- }
- }
-
- if (bond->dev->flags & IFF_UP) {
- /* If the interface is up, we may need to fire off
- * the MII timer. If the interface is down, the
- * timer will get fired off when the open function
- * is called.
- */
+ }
+ pr_info("%s: Setting MII monitoring interval to %d.\n",
+ bond->dev->name, new_value);
+ bond->params.miimon = new_value;
+ if (bond->params.updelay)
+ pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.updelay * bond->params.miimon);
+ if (bond->params.downdelay)
+ pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.downdelay * bond->params.miimon);
+ if (new_value && bond->params.arp_interval) {
+ pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
+ bond->dev->name);
+ bond->params.arp_interval = 0;
+ if (bond->params.arp_validate)
+ bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
+ }
+ if (bond->dev->flags & IFF_UP) {
+ /* If the interface is up, we may need to fire off
+ * the MII timer. If the interface is down, the
+ * timer will get fired off when the open function
+ * is called.
+ */
+ if (!new_value) {
+ cancel_delayed_work_sync(&bond->mii_work);
+ } else {
cancel_delayed_work_sync(&bond->arp_work);
queue_delayed_work(bond->wq, &bond->mii_work, 0);
}
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index b39ca5b..ff2ba86c 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -46,6 +46,7 @@
config CAN_PEAK_PCMCIA
tristate "PEAK PCAN-PC Card"
depends on PCMCIA
+ depends on HAS_IOPORT
---help---
This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
from PEAK-System (http://www.peak-system.com). To compile this
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index a042cdc..3c18d7d 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -348,7 +348,7 @@
*/
if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
REG_CR_BASICCAN_INITIAL &&
- (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
+ (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
(priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
flag = 1;
@@ -360,7 +360,7 @@
* See states on p. 23 of the Datasheet.
*/
if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
- priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
+ priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
return flag;
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index daf4013..e4df307 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -92,7 +92,7 @@
*/
spin_lock_irqsave(&priv->cmdreg_lock, flags);
priv->write_reg(priv, REG_CMR, val);
- priv->read_reg(priv, REG_SR);
+ priv->read_reg(priv, SJA1000_REG_SR);
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
@@ -502,7 +502,7 @@
while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
n++;
- status = priv->read_reg(priv, REG_SR);
+ status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller due to hw unplug */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
@@ -530,7 +530,7 @@
/* receive interrupt */
while (status & SR_RBS) {
sja1000_rx(dev);
- status = priv->read_reg(priv, REG_SR);
+ status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index afa9984..aa48e05 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -56,7 +56,7 @@
/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
#define REG_MOD 0x00
#define REG_CMR 0x01
-#define REG_SR 0x02
+#define SJA1000_REG_SR 0x02
#define REG_IR 0x03
#define REG_IER 0x04
#define REG_ALC 0x0B
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h
index 829b5ad..b5fd934 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e.h
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h
@@ -186,7 +186,7 @@
/* how about 0x2000 */
#define MAX_TX_BUF_LEN 0x2000
#define MAX_TX_BUF_SHIFT 13
-/*#define MAX_TX_BUF_LEN 0x3000 */
+#define MAX_TSO_SEG_SIZE 0x3c00
/* rrs word 1 bit 0:31 */
#define RRS_RX_CSUM_MASK 0xFFFF
@@ -438,7 +438,6 @@
struct atl1e_hw hw;
struct atl1e_hw_stats hw_stats;
- bool have_msi;
u32 wol;
u16 link_speed;
u16 link_duplex;
diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
index 92f4734..ac25f05 100644
--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -1849,34 +1849,19 @@
struct net_device *netdev = adapter->netdev;
free_irq(adapter->pdev->irq, netdev);
-
- if (adapter->have_msi)
- pci_disable_msi(adapter->pdev);
}
static int atl1e_request_irq(struct atl1e_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
struct net_device *netdev = adapter->netdev;
- int flags = 0;
int err = 0;
- adapter->have_msi = true;
- err = pci_enable_msi(pdev);
- if (err) {
- netdev_dbg(netdev,
- "Unable to allocate MSI interrupt Error: %d\n", err);
- adapter->have_msi = false;
- }
-
- if (!adapter->have_msi)
- flags |= IRQF_SHARED;
- err = request_irq(pdev->irq, atl1e_intr, flags, netdev->name, netdev);
+ err = request_irq(pdev->irq, atl1e_intr, IRQF_SHARED, netdev->name,
+ netdev);
if (err) {
netdev_dbg(adapter->netdev,
"Unable to allocate interrupt Error: %d\n", err);
- if (adapter->have_msi)
- pci_disable_msi(pdev);
return err;
}
netdev_dbg(netdev, "atl1e_request_irq OK\n");
@@ -2344,6 +2329,7 @@
INIT_WORK(&adapter->reset_task, atl1e_reset_task);
INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task);
+ netif_set_gso_max_size(netdev, MAX_TSO_SEG_SIZE);
err = register_netdev(netdev);
if (err) {
netdev_err(netdev, "register netdevice failed\n");
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 67d2663..17a9727 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -14604,8 +14604,11 @@
if (j + len > block_end)
goto partno;
- memcpy(tp->fw_ver, &vpd_data[j], len);
- strncat(tp->fw_ver, " bc ", vpdlen - len - 1);
+ if (len >= sizeof(tp->fw_ver))
+ len = sizeof(tp->fw_ver) - 1;
+ memset(tp->fw_ver, 0, sizeof(tp->fw_ver));
+ snprintf(tp->fw_ver, sizeof(tp->fw_ver), "%.*s bc ", len,
+ &vpd_data[j]);
}
partno:
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index a170065..b0ebc9f 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -163,6 +163,7 @@
#define XGMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */
/* XGMAC_INT_STAT reg */
+#define XGMAC_INT_STAT_PMTIM 0x00800000 /* PMT Interrupt Mask */
#define XGMAC_INT_STAT_PMT 0x0080 /* PMT Interrupt Status */
#define XGMAC_INT_STAT_LPI 0x0040 /* LPI Interrupt Status */
@@ -960,6 +961,9 @@
writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_STATUS);
writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_INTR_ENA);
+ /* Mask power mgt interrupt */
+ writel(XGMAC_INT_STAT_PMTIM, ioaddr + XGMAC_INT_STAT);
+
/* XGMAC requires AXI bus init. This is a 'magic number' for now */
writel(0x0077000E, ioaddr + XGMAC_DMA_AXI_BUS);
@@ -1141,6 +1145,9 @@
struct sk_buff *skb;
int frame_len;
+ if (!dma_ring_cnt(priv->rx_head, priv->rx_tail, DMA_RX_RING_SZ))
+ break;
+
entry = priv->rx_tail;
p = priv->dma_rx + entry;
if (desc_get_owner(p))
@@ -1825,7 +1832,7 @@
unsigned int pmt = 0;
if (mode & WAKE_MAGIC)
- pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT;
+ pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT_EN;
if (mode & WAKE_UCAST)
pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_GLBL_UNICAST;
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 8cdf025..9eada8e 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -257,6 +257,107 @@
tmp = readl(reg);
}
+/*
+ * Sleep, either by using msleep() or if we are suspending, then
+ * use mdelay() to sleep.
+ */
+static void dm9000_msleep(board_info_t *db, unsigned int ms)
+{
+ if (db->in_suspend)
+ mdelay(ms);
+ else
+ msleep(ms);
+}
+
+/* Read a word from phyxcer */
+static int
+dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
+{
+ board_info_t *db = netdev_priv(dev);
+ unsigned long flags;
+ unsigned int reg_save;
+ int ret;
+
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Issue phyxcer read command */
+ iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS);
+
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_msleep(db, 1); /* Wait read complete */
+
+ spin_lock_irqsave(&db->lock, flags);
+ reg_save = readb(db->io_addr);
+
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
+
+ /* The read data keeps on REG_0D & REG_0E */
+ ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
+
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ mutex_unlock(&db->addr_lock);
+
+ dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
+ return ret;
+}
+
+/* Write a word to phyxcer */
+static void
+dm9000_phy_write(struct net_device *dev,
+ int phyaddr_unused, int reg, int value)
+{
+ board_info_t *db = netdev_priv(dev);
+ unsigned long flags;
+ unsigned long reg_save;
+
+ dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Fill the written data into REG_0D & REG_0E */
+ iow(db, DM9000_EPDRL, value);
+ iow(db, DM9000_EPDRH, value >> 8);
+
+ /* Issue phyxcer write command */
+ iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW);
+
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_msleep(db, 1); /* Wait write complete */
+
+ spin_lock_irqsave(&db->lock, flags);
+ reg_save = readb(db->io_addr);
+
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+ mutex_unlock(&db->addr_lock);
+}
+
/* dm9000_set_io
*
* select the specified set of io routines to use with the
@@ -795,6 +896,9 @@
iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
+ dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
+ dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */
+
ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
/* if wol is needed, then always set NCR_WAKEEN otherwise we end
@@ -1201,109 +1305,6 @@
return 0;
}
-/*
- * Sleep, either by using msleep() or if we are suspending, then
- * use mdelay() to sleep.
- */
-static void dm9000_msleep(board_info_t *db, unsigned int ms)
-{
- if (db->in_suspend)
- mdelay(ms);
- else
- msleep(ms);
-}
-
-/*
- * Read a word from phyxcer
- */
-static int
-dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
-{
- board_info_t *db = netdev_priv(dev);
- unsigned long flags;
- unsigned int reg_save;
- int ret;
-
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock,flags);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Fill the phyxcer register into REG_0C */
- iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
- iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); /* Issue phyxcer read command */
-
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
-
- dm9000_msleep(db, 1); /* Wait read complete */
-
- spin_lock_irqsave(&db->lock,flags);
- reg_save = readb(db->io_addr);
-
- iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
-
- /* The read data keeps on REG_0D & REG_0E */
- ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
-
- /* restore the previous address */
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
-
- mutex_unlock(&db->addr_lock);
-
- dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
- return ret;
-}
-
-/*
- * Write a word to phyxcer
- */
-static void
-dm9000_phy_write(struct net_device *dev,
- int phyaddr_unused, int reg, int value)
-{
- board_info_t *db = netdev_priv(dev);
- unsigned long flags;
- unsigned long reg_save;
-
- dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock,flags);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Fill the phyxcer register into REG_0C */
- iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
- /* Fill the written data into REG_0D & REG_0E */
- iow(db, DM9000_EPDRL, value);
- iow(db, DM9000_EPDRH, value >> 8);
-
- iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); /* Issue phyxcer write command */
-
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock, flags);
-
- dm9000_msleep(db, 1); /* Wait write complete */
-
- spin_lock_irqsave(&db->lock,flags);
- reg_save = readb(db->io_addr);
-
- iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
-
- /* restore the previous address */
- writeb(reg_save, db->io_addr);
-
- spin_unlock_irqrestore(&db->lock, flags);
- mutex_unlock(&db->addr_lock);
-}
-
static void
dm9000_shutdown(struct net_device *dev)
{
@@ -1502,7 +1503,12 @@
db->flags |= DM9000_PLATF_SIMPLE_PHY;
#endif
- dm9000_reset(db);
+ /* Fixing bug on dm9000_probe, takeover dm9000_reset(db),
+ * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo
+ * while probe stage.
+ */
+
+ iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST);
/* try multiple times, DM9000 sometimes gets the read wrong */
for (i = 0; i < 8; i++) {
diff --git a/drivers/net/ethernet/davicom/dm9000.h b/drivers/net/ethernet/davicom/dm9000.h
index 55688bd..9ce058a 100644
--- a/drivers/net/ethernet/davicom/dm9000.h
+++ b/drivers/net/ethernet/davicom/dm9000.h
@@ -69,7 +69,9 @@
#define NCR_WAKEEN (1<<6)
#define NCR_FCOL (1<<4)
#define NCR_FDX (1<<3)
-#define NCR_LBK (3<<1)
+
+#define NCR_RESERVED (3<<1)
+#define NCR_MAC_LBK (1<<1)
#define NCR_RST (1<<0)
#define NSR_SPEED (1<<7)
@@ -167,5 +169,12 @@
#define ISR_LNKCHNG (1<<5)
#define ISR_UNDERRUN (1<<4)
+/* Davicom MII registers.
+ */
+
+#define MII_DM_DSPCR 0x1b /* DSP Control Register */
+
+#define DSPCR_INIT_PARAM 0xE100 /* DSP init parameter */
+
#endif /* _DM9000X_H_ */
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 911d025..f292c3a 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -345,6 +345,53 @@
return NETDEV_TX_OK;
}
+/* Init RX & TX buffer descriptors
+ */
+static void fec_enet_bd_init(struct net_device *dev)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+ struct bufdesc *bdp;
+ unsigned int i;
+
+ /* Initialize the receive buffer descriptors. */
+ bdp = fep->rx_bd_base;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page. */
+ if (bdp->cbd_bufaddr)
+ bdp->cbd_sc = BD_ENET_RX_EMPTY;
+ else
+ bdp->cbd_sc = 0;
+ bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
+ }
+
+ /* Set the last buffer to wrap */
+ bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ fep->cur_rx = fep->rx_bd_base;
+
+ /* ...and the same for transmit */
+ bdp = fep->tx_bd_base;
+ fep->cur_tx = bdp;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page. */
+ bdp->cbd_sc = 0;
+ if (bdp->cbd_bufaddr && fep->tx_skbuff[i]) {
+ dev_kfree_skb_any(fep->tx_skbuff[i]);
+ fep->tx_skbuff[i] = NULL;
+ }
+ bdp->cbd_bufaddr = 0;
+ bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
+ }
+
+ /* Set the last buffer to wrap */
+ bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
+ bdp->cbd_sc |= BD_SC_WRAP;
+ fep->dirty_tx = bdp;
+}
+
/* This function is called to start or restart the FEC during a link
* change. This only happens when switching between half and full
* duplex.
@@ -388,6 +435,8 @@
/* Set maximum receive buffer size. */
writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
+ fec_enet_bd_init(ndev);
+
/* Set receive and transmit descriptor base. */
writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
if (fep->bufdesc_ex)
@@ -397,7 +446,6 @@
writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc)
* RX_RING_SIZE, fep->hwp + FEC_X_DES_START);
- fep->cur_rx = fep->rx_bd_base;
for (i = 0; i <= TX_RING_MOD_MASK; i++) {
if (fep->tx_skbuff[i]) {
@@ -1597,8 +1645,6 @@
{
struct fec_enet_private *fep = netdev_priv(ndev);
struct bufdesc *cbd_base;
- struct bufdesc *bdp;
- unsigned int i;
/* Allocate memory for buffer descriptors. */
cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma,
@@ -1608,6 +1654,7 @@
return -ENOMEM;
}
+ memset(cbd_base, 0, PAGE_SIZE);
spin_lock_init(&fep->hw_lock);
fep->netdev = ndev;
@@ -1631,35 +1678,6 @@
writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK);
netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT);
- /* Initialize the receive buffer descriptors. */
- bdp = fep->rx_bd_base;
- for (i = 0; i < RX_RING_SIZE; i++) {
-
- /* Initialize the BD for every fragment in the page. */
- bdp->cbd_sc = 0;
- bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
- }
-
- /* Set the last buffer to wrap */
- bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
- bdp->cbd_sc |= BD_SC_WRAP;
-
- /* ...and the same for transmit */
- bdp = fep->tx_bd_base;
- fep->cur_tx = bdp;
- for (i = 0; i < TX_RING_SIZE; i++) {
-
- /* Initialize the BD for every fragment in the page. */
- bdp->cbd_sc = 0;
- bdp->cbd_bufaddr = 0;
- bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
- }
-
- /* Set the last buffer to wrap */
- bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
- bdp->cbd_sc |= BD_SC_WRAP;
- fep->dirty_tx = bdp;
-
fec_restart(ndev, 0);
return 0;
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index 43462d5..ffd2871 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -1053,6 +1053,10 @@
txdr->buffer_info[i].dma =
dma_map_single(&pdev->dev, skb->data, skb->len,
DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, txdr->buffer_info[i].dma)) {
+ ret_val = 4;
+ goto err_nomem;
+ }
tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
tx_desc->lower.data = cpu_to_le32(skb->len);
tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
@@ -1069,7 +1073,7 @@
rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
GFP_KERNEL);
if (!rxdr->buffer_info) {
- ret_val = 4;
+ ret_val = 5;
goto err_nomem;
}
@@ -1077,7 +1081,7 @@
rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
GFP_KERNEL);
if (!rxdr->desc) {
- ret_val = 5;
+ ret_val = 6;
goto err_nomem;
}
memset(rxdr->desc, 0, rxdr->size);
@@ -1101,7 +1105,7 @@
skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
if (!skb) {
- ret_val = 6;
+ ret_val = 7;
goto err_nomem;
}
skb_reserve(skb, NET_IP_ALIGN);
@@ -1110,6 +1114,10 @@
rxdr->buffer_info[i].dma =
dma_map_single(&pdev->dev, skb->data,
E1000_RXBUFFER_2048, DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, rxdr->buffer_info[i].dma)) {
+ ret_val = 8;
+ goto err_nomem;
+ }
rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
memset(skb->data, 0x00, skb->len);
}
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 948b86ff..7e615e2 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -848,11 +848,16 @@
}
}
- if (!buffer_info->dma)
+ if (!buffer_info->dma) {
buffer_info->dma = dma_map_page(&pdev->dev,
buffer_info->page, 0,
PAGE_SIZE,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+ }
rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
index ea48083..b5f94ab 100644
--- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c
+++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
@@ -2159,6 +2159,10 @@
skb->data,
adapter->rx_buffer_len,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
rx_desc = IXGB_RX_DESC(*rx_ring, i);
rx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
@@ -2168,7 +2172,8 @@
rx_desc->status = 0;
- if (++i == rx_ring->count) i = 0;
+ if (++i == rx_ring->count)
+ i = 0;
buffer_info = &rx_ring->buffer_info[i];
}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index db5611a..79f4a26 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7922,12 +7922,19 @@
ixgbe_dbg_init();
#endif /* CONFIG_DEBUG_FS */
+ ret = pci_register_driver(&ixgbe_driver);
+ if (ret) {
+#ifdef CONFIG_DEBUG_FS
+ ixgbe_dbg_exit();
+#endif /* CONFIG_DEBUG_FS */
+ return ret;
+ }
+
#ifdef CONFIG_IXGBE_DCA
dca_register_notify(&dca_notifier);
#endif
- ret = pci_register_driver(&ixgbe_driver);
- return ret;
+ return 0;
}
module_init(ixgbe_init_module);
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index fc07ca3..6a0e671 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -1067,7 +1067,7 @@
sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
- tp = space - 2048/8;
+ tp = space - 8192/8;
sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
} else {
diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h
index 615ac63..ec6dcd8 100644
--- a/drivers/net/ethernet/marvell/sky2.h
+++ b/drivers/net/ethernet/marvell/sky2.h
@@ -2074,7 +2074,7 @@
GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */
GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */
-#define GMAC_DEF_MSK GM_IS_TX_FF_UR
+#define GMAC_DEF_MSK (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR)
};
/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index f278b10..30d78f8 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -411,8 +411,8 @@
static void mlx4_en_u64_to_mac(unsigned char dst_mac[ETH_ALEN + 2], u64 src_mac)
{
- unsigned int i;
- for (i = ETH_ALEN - 1; i; --i) {
+ int i;
+ for (i = ETH_ALEN - 1; i >= 0; --i) {
dst_mac[i] = src_mac & 0xff;
src_mac >>= 8;
}
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index 33bcb63..8fb4812 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -528,7 +528,7 @@
for (; rxfc != 0; rxfc--) {
rxh = ks8851_rdreg32(ks, KS_RXFHSR);
rxstat = rxh & 0xffff;
- rxlen = rxh >> 16;
+ rxlen = (rxh >> 16) & 0xfff;
netif_dbg(ks, rx_status, ks->netdev,
"rx: stat 0x%04x, len 0x%04x\n", rxstat, rxlen);
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 28fb50a..4ecbe64 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3818,6 +3818,30 @@
}
}
+static void rtl_speed_down(struct rtl8169_private *tp)
+{
+ u32 adv;
+ int lpa;
+
+ rtl_writephy(tp, 0x1f, 0x0000);
+ lpa = rtl_readphy(tp, MII_LPA);
+
+ if (lpa & (LPA_10HALF | LPA_10FULL))
+ adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full;
+ else if (lpa & (LPA_100HALF | LPA_100FULL))
+ adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
+ else
+ adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
+ (tp->mii.supports_gmii ?
+ ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full : 0);
+
+ rtl8169_set_speed(tp->dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL,
+ adv);
+}
+
static void rtl_wol_suspend_quirk(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
@@ -3848,9 +3872,7 @@
if (!(__rtl8169_get_wol(tp) & WAKE_ANY))
return false;
- rtl_writephy(tp, 0x1f, 0x0000);
- rtl_writephy(tp, MII_BMCR, 0x0000);
-
+ rtl_speed_down(tp);
rtl_wol_suspend_quirk(tp);
return true;
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index bf5e3cf..6ed333f 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1216,10 +1216,7 @@
if (felic_stat & ECSR_LCHNG) {
/* Link Changed */
if (mdp->cd->no_psr || mdp->no_ether_link) {
- if (mdp->link == PHY_DOWN)
- link_stat = 0;
- else
- link_stat = PHY_ST_LINK;
+ goto ignore_link;
} else {
link_stat = (sh_eth_read(ndev, PSR));
if (mdp->ether_link_active_low)
@@ -1242,6 +1239,7 @@
}
}
+ignore_link:
if (intr_status & EESR_TWB) {
/* Write buck end. unused write back interrupt */
if (intr_status & EESR_TABT) /* Transmit Abort int */
@@ -1326,12 +1324,18 @@
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_cpu_data *cd = mdp->cd;
irqreturn_t ret = IRQ_NONE;
- u32 intr_status = 0;
+ unsigned long intr_status;
spin_lock(&mdp->lock);
- /* Get interrpt stat */
+ /* Get interrupt status */
intr_status = sh_eth_read(ndev, EESR);
+ /* Mask it with the interrupt mask, forcing ECI interrupt to be always
+ * enabled since it's the one that comes thru regardless of the mask,
+ * and we need to fully handle it in sh_eth_error() in order to quench
+ * it as it doesn't get cleared by just writing 1 to the ECI bit...
+ */
+ intr_status &= sh_eth_read(ndev, EESIPR) | DMAC_M_ECI;
/* Clear interrupt */
if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
@@ -1373,7 +1377,7 @@
struct phy_device *phydev = mdp->phydev;
int new_state = 0;
- if (phydev->link != PHY_DOWN) {
+ if (phydev->link) {
if (phydev->duplex != mdp->duplex) {
new_state = 1;
mdp->duplex = phydev->duplex;
@@ -1387,17 +1391,21 @@
if (mdp->cd->set_rate)
mdp->cd->set_rate(ndev);
}
- if (mdp->link == PHY_DOWN) {
+ if (!mdp->link) {
sh_eth_write(ndev,
(sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR);
new_state = 1;
mdp->link = phydev->link;
+ if (mdp->cd->no_psr || mdp->no_ether_link)
+ sh_eth_rcv_snd_enable(ndev);
}
} else if (mdp->link) {
new_state = 1;
- mdp->link = PHY_DOWN;
+ mdp->link = 0;
mdp->speed = 0;
mdp->duplex = -1;
+ if (mdp->cd->no_psr || mdp->no_ether_link)
+ sh_eth_rcv_snd_disable(ndev);
}
if (new_state && netif_msg_link(mdp))
@@ -1414,7 +1422,7 @@
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
mdp->mii_bus->id , mdp->phy_id);
- mdp->link = PHY_DOWN;
+ mdp->link = 0;
mdp->speed = 0;
mdp->duplex = -1;
diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h
index e665567..828be45 100644
--- a/drivers/net/ethernet/renesas/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
@@ -723,7 +723,7 @@
u32 phy_id; /* PHY ID */
struct mii_bus *mii_bus; /* MDIO bus control */
struct phy_device *phydev; /* PHY device control */
- enum phy_state link;
+ int link;
phy_interface_t phy_interface;
int msg_enable;
int speed;
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index df32a09..80cad06 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -436,7 +436,7 @@
* queue is stopped then start the queue as we have free desc for tx
*/
if (unlikely(netif_queue_stopped(ndev)))
- netif_start_queue(ndev);
+ netif_wake_queue(ndev);
cpts_tx_timestamp(priv->cpts, skb);
priv->stats.tx_packets++;
priv->stats.tx_bytes += len;
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index ae1b77a..72300bc 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1053,7 +1053,7 @@
* queue is stopped then start the queue as we have free desc for tx
*/
if (unlikely(netif_queue_stopped(ndev)))
- netif_start_queue(ndev);
+ netif_wake_queue(ndev);
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += len;
dev_kfree_skb_any(skb);
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 9abe517..1a15ec1 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -914,8 +914,12 @@
static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
{
struct usbnet *dev = netdev_priv(netdev);
+ int ret;
- int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
+ if (new_mtu > MAX_SINGLE_PACKET_SIZE)
+ return -EINVAL;
+
+ ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
if (ret < 0) {
netdev_warn(dev->net, "Failed to set mac rx frame length\n");
return ret;
@@ -1324,7 +1328,7 @@
netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf);
- ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
+ ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
if (ret < 0) {
netdev_warn(dev->net, "Failed to set max rx frame length\n");
return ret;
@@ -2134,8 +2138,8 @@
else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
dev->net->stats.rx_frame_errors++;
} else {
- /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
- if (unlikely(size > (ETH_FRAME_LEN + 12))) {
+ /* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
+ if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) {
netif_dbg(dev, rx_err, dev->net,
"size err rx_cmd_a=0x%08x\n",
rx_cmd_a);
diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c
index 39c84ec..7fdac6c 100644
--- a/drivers/net/wireless/ath/ath9k/link.c
+++ b/drivers/net/wireless/ath/ath9k/link.c
@@ -170,7 +170,8 @@
{
struct ath_softc *sc = (struct ath_softc *)data;
- ieee80211_queue_work(sc->hw, &sc->hw_check_work);
+ if (!test_bit(SC_OP_INVALID, &sc->sc_flags))
+ ieee80211_queue_work(sc->hw, &sc->hw_check_work);
}
/*
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 38bc5a7..1221469 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1487,8 +1487,12 @@
const struct b43_dma_ops *ops;
struct b43_dmaring *ring;
struct b43_dmadesc_meta *meta;
+ static const struct b43_txstatus fake; /* filled with 0 */
+ const struct b43_txstatus *txstat;
int slot, firstused;
bool frame_succeed;
+ int skip;
+ static u8 err_out1, err_out2;
ring = parse_cookie(dev, status->cookie, &slot);
if (unlikely(!ring))
@@ -1501,13 +1505,36 @@
firstused = ring->current_slot - ring->used_slots + 1;
if (firstused < 0)
firstused = ring->nr_slots + firstused;
+
+ skip = 0;
if (unlikely(slot != firstused)) {
/* This possibly is a firmware bug and will result in
- * malfunction, memory leaks and/or stall of DMA functionality. */
- b43dbg(dev->wl, "Out of order TX status report on DMA ring %d. "
- "Expected %d, but got %d\n",
- ring->index, firstused, slot);
- return;
+ * malfunction, memory leaks and/or stall of DMA functionality.
+ */
+ if (slot == next_slot(ring, next_slot(ring, firstused))) {
+ /* If a single header/data pair was missed, skip over
+ * the first two slots in an attempt to recover.
+ */
+ slot = firstused;
+ skip = 2;
+ if (!err_out1) {
+ /* Report the error once. */
+ b43dbg(dev->wl,
+ "Skip on DMA ring %d slot %d.\n",
+ ring->index, slot);
+ err_out1 = 1;
+ }
+ } else {
+ /* More than a single header/data pair were missed.
+ * Report this error once.
+ */
+ if (!err_out2)
+ b43dbg(dev->wl,
+ "Out of order TX status report on DMA ring %d. Expected %d, but got %d\n",
+ ring->index, firstused, slot);
+ err_out2 = 1;
+ return;
+ }
}
ops = ring->ops;
@@ -1522,11 +1549,13 @@
slot, firstused, ring->index);
break;
}
+
if (meta->skb) {
struct b43_private_tx_info *priv_info =
- b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
+ b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
- unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1);
+ unmap_descbuffer(ring, meta->dmaaddr,
+ meta->skb->len, 1);
kfree(priv_info->bouncebuffer);
priv_info->bouncebuffer = NULL;
} else {
@@ -1538,8 +1567,9 @@
struct ieee80211_tx_info *info;
if (unlikely(!meta->skb)) {
- /* This is a scatter-gather fragment of a frame, so
- * the skb pointer must not be NULL. */
+ /* This is a scatter-gather fragment of a frame,
+ * so the skb pointer must not be NULL.
+ */
b43dbg(dev->wl, "TX status unexpected NULL skb "
"at slot %d (first=%d) on ring %d\n",
slot, firstused, ring->index);
@@ -1550,9 +1580,18 @@
/*
* Call back to inform the ieee80211 subsystem about
- * the status of the transmission.
+ * the status of the transmission. When skipping over
+ * a missed TX status report, use a status structure
+ * filled with zeros to indicate that the frame was not
+ * sent (frame_count 0) and not acknowledged
*/
- frame_succeed = b43_fill_txstatus_report(dev, info, status);
+ if (unlikely(skip))
+ txstat = &fake;
+ else
+ txstat = status;
+
+ frame_succeed = b43_fill_txstatus_report(dev, info,
+ txstat);
#ifdef CONFIG_B43_DEBUG
if (frame_succeed)
ring->nr_succeed_tx_packets++;
@@ -1580,12 +1619,14 @@
/* Everything unmapped and free'd. So it's not used anymore. */
ring->used_slots--;
- if (meta->is_last_fragment) {
+ if (meta->is_last_fragment && !skip) {
/* This is the last scatter-gather
* fragment of the frame. We are done. */
break;
}
slot = next_slot(ring, slot);
+ if (skip > 0)
+ --skip;
}
if (ring->stopped) {
B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME);
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 3c35382..e8486c1 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1564,7 +1564,7 @@
u16 clip_off[2] = { 0xFFFF, 0xFFFF };
u8 vcm_final = 0;
- s8 offset[4];
+ s32 offset[4];
s32 results[8][4] = { };
s32 results_min[4] = { };
s32 poll_results[4] = { };
@@ -1615,7 +1615,7 @@
}
for (i = 0; i < 4; i += 2) {
s32 curr;
- s32 mind = 40;
+ s32 mind = 0x100000;
s32 minpoll = 249;
u8 minvcm = 0;
if (2 * core != i)
@@ -1732,7 +1732,7 @@
u8 regs_save_radio[2];
u16 regs_save_phy[2];
- s8 offset[4];
+ s32 offset[4];
u8 core;
u8 rail;
@@ -1799,7 +1799,7 @@
}
for (i = 0; i < 4; i++) {
- s32 mind = 40;
+ s32 mind = 0x100000;
u8 minvcm = 0;
s32 minpoll = 249;
s32 curr;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index 21a8242..18d3764 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -1137,9 +1137,8 @@
gain0_15 = ((biq1 & 0xf) << 12) |
((tia & 0xf) << 8) |
((lna2 & 0x3) << 6) |
- ((lna2 & 0x3) << 4) |
- ((lna1 & 0x3) << 2) |
- ((lna1 & 0x3) << 0);
+ ((lna2 &
+ 0x3) << 4) | ((lna1 & 0x3) << 2) | ((lna1 & 0x3) << 0);
mod_phy_reg(pi, 0x4b6, (0xffff << 0), gain0_15 << 0);
mod_phy_reg(pi, 0x4b7, (0xf << 0), gain16_19 << 0);
@@ -1157,8 +1156,6 @@
}
mod_phy_reg(pi, 0x44d, (0x1 << 0), (!trsw) << 0);
- mod_phy_reg(pi, 0x4b1, (0x3 << 11), lna1 << 11);
- mod_phy_reg(pi, 0x4e6, (0x3 << 3), lna1 << 3);
}
@@ -1331,43 +1328,6 @@
return (iq_est.i_pwr + iq_est.q_pwr) / nsamples;
}
-static bool wlc_lcnphy_rx_iq_cal_gain(struct brcms_phy *pi, u16 biq1_gain,
- u16 tia_gain, u16 lna2_gain)
-{
- u32 i_thresh_l, q_thresh_l;
- u32 i_thresh_h, q_thresh_h;
- struct lcnphy_iq_est iq_est_h, iq_est_l;
-
- wlc_lcnphy_set_rx_gain_by_distribution(pi, 0, 0, 0, biq1_gain, tia_gain,
- lna2_gain, 0);
-
- wlc_lcnphy_rx_gain_override_enable(pi, true);
- wlc_lcnphy_start_tx_tone(pi, 2000, (40 >> 1), 0);
- udelay(500);
- write_radio_reg(pi, RADIO_2064_REG112, 0);
- if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_l))
- return false;
-
- wlc_lcnphy_start_tx_tone(pi, 2000, 40, 0);
- udelay(500);
- write_radio_reg(pi, RADIO_2064_REG112, 0);
- if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_h))
- return false;
-
- i_thresh_l = (iq_est_l.i_pwr << 1);
- i_thresh_h = (iq_est_l.i_pwr << 2) + iq_est_l.i_pwr;
-
- q_thresh_l = (iq_est_l.q_pwr << 1);
- q_thresh_h = (iq_est_l.q_pwr << 2) + iq_est_l.q_pwr;
- if ((iq_est_h.i_pwr > i_thresh_l) &&
- (iq_est_h.i_pwr < i_thresh_h) &&
- (iq_est_h.q_pwr > q_thresh_l) &&
- (iq_est_h.q_pwr < q_thresh_h))
- return true;
-
- return false;
-}
-
static bool
wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
const struct lcnphy_rx_iqcomp *iqcomp,
@@ -1382,8 +1342,8 @@
RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old,
rfoverride3_old, rfoverride3val_old, rfoverride4_old,
rfoverride4val_old, afectrlovr_old, afectrlovrval_old;
- int tia_gain, lna2_gain, biq1_gain;
- bool set_gain;
+ int tia_gain;
+ u32 received_power, rx_pwr_threshold;
u16 old_sslpnCalibClkEnCtrl, old_sslpnRxFeClkEnCtrl;
u16 values_to_save[11];
s16 *ptr;
@@ -1408,135 +1368,127 @@
goto cal_done;
}
- WARN_ON(module != 1);
- tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
- wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF);
+ if (module == 1) {
- for (i = 0; i < 11; i++)
- values_to_save[i] =
- read_radio_reg(pi, rxiq_cal_rf_reg[i]);
- Core1TxControl_old = read_phy_reg(pi, 0x631);
+ tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
+ wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF);
- or_phy_reg(pi, 0x631, 0x0015);
+ for (i = 0; i < 11; i++)
+ values_to_save[i] =
+ read_radio_reg(pi, rxiq_cal_rf_reg[i]);
+ Core1TxControl_old = read_phy_reg(pi, 0x631);
- RFOverride0_old = read_phy_reg(pi, 0x44c);
- RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
- rfoverride2_old = read_phy_reg(pi, 0x4b0);
- rfoverride2val_old = read_phy_reg(pi, 0x4b1);
- rfoverride3_old = read_phy_reg(pi, 0x4f9);
- rfoverride3val_old = read_phy_reg(pi, 0x4fa);
- rfoverride4_old = read_phy_reg(pi, 0x938);
- rfoverride4val_old = read_phy_reg(pi, 0x939);
- afectrlovr_old = read_phy_reg(pi, 0x43b);
- afectrlovrval_old = read_phy_reg(pi, 0x43c);
- old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da);
- old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db);
+ or_phy_reg(pi, 0x631, 0x0015);
- tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi);
- if (tx_gain_override_old) {
- wlc_lcnphy_get_tx_gain(pi, &old_gains);
- tx_gain_index_old = pi_lcn->lcnphy_current_index;
- }
+ RFOverride0_old = read_phy_reg(pi, 0x44c);
+ RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
+ rfoverride2_old = read_phy_reg(pi, 0x4b0);
+ rfoverride2val_old = read_phy_reg(pi, 0x4b1);
+ rfoverride3_old = read_phy_reg(pi, 0x4f9);
+ rfoverride3val_old = read_phy_reg(pi, 0x4fa);
+ rfoverride4_old = read_phy_reg(pi, 0x938);
+ rfoverride4val_old = read_phy_reg(pi, 0x939);
+ afectrlovr_old = read_phy_reg(pi, 0x43b);
+ afectrlovrval_old = read_phy_reg(pi, 0x43c);
+ old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da);
+ old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db);
- wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx);
-
- mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0);
-
- mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1);
-
- write_radio_reg(pi, RADIO_2064_REG116, 0x06);
- write_radio_reg(pi, RADIO_2064_REG12C, 0x07);
- write_radio_reg(pi, RADIO_2064_REG06A, 0xd3);
- write_radio_reg(pi, RADIO_2064_REG098, 0x03);
- write_radio_reg(pi, RADIO_2064_REG00B, 0x7);
- mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4);
- write_radio_reg(pi, RADIO_2064_REG01D, 0x01);
- write_radio_reg(pi, RADIO_2064_REG114, 0x01);
- write_radio_reg(pi, RADIO_2064_REG02E, 0x10);
- write_radio_reg(pi, RADIO_2064_REG12A, 0x08);
-
- mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0);
- mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2);
- mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2);
- mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3);
- mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3);
- mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5);
- mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5);
-
- mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
-
- write_phy_reg(pi, 0x6da, 0xffff);
- or_phy_reg(pi, 0x6db, 0x3);
-
- wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
- set_gain = false;
-
- lna2_gain = 3;
- while ((lna2_gain >= 0) && !set_gain) {
- tia_gain = 4;
-
- while ((tia_gain >= 0) && !set_gain) {
- biq1_gain = 6;
-
- while ((biq1_gain >= 0) && !set_gain) {
- set_gain = wlc_lcnphy_rx_iq_cal_gain(pi,
- (u16)
- biq1_gain,
- (u16)
- tia_gain,
- (u16)
- lna2_gain);
- biq1_gain -= 1;
- }
- tia_gain -= 1;
+ tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi);
+ if (tx_gain_override_old) {
+ wlc_lcnphy_get_tx_gain(pi, &old_gains);
+ tx_gain_index_old = pi_lcn->lcnphy_current_index;
}
- lna2_gain -= 1;
+
+ wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx);
+
+ mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0);
+
+ mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1);
+
+ write_radio_reg(pi, RADIO_2064_REG116, 0x06);
+ write_radio_reg(pi, RADIO_2064_REG12C, 0x07);
+ write_radio_reg(pi, RADIO_2064_REG06A, 0xd3);
+ write_radio_reg(pi, RADIO_2064_REG098, 0x03);
+ write_radio_reg(pi, RADIO_2064_REG00B, 0x7);
+ mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4);
+ write_radio_reg(pi, RADIO_2064_REG01D, 0x01);
+ write_radio_reg(pi, RADIO_2064_REG114, 0x01);
+ write_radio_reg(pi, RADIO_2064_REG02E, 0x10);
+ write_radio_reg(pi, RADIO_2064_REG12A, 0x08);
+
+ mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0);
+ mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2);
+ mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2);
+ mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3);
+ mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3);
+ mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5);
+ mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5);
+
+ mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
+
+ wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0);
+ write_phy_reg(pi, 0x6da, 0xffff);
+ or_phy_reg(pi, 0x6db, 0x3);
+ wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
+ wlc_lcnphy_rx_gain_override_enable(pi, true);
+
+ tia_gain = 8;
+ rx_pwr_threshold = 950;
+ while (tia_gain > 0) {
+ tia_gain -= 1;
+ wlc_lcnphy_set_rx_gain_by_distribution(pi,
+ 0, 0, 2, 2,
+ (u16)
+ tia_gain, 1, 0);
+ udelay(500);
+
+ received_power =
+ wlc_lcnphy_measure_digital_power(pi, 2000);
+ if (received_power < rx_pwr_threshold)
+ break;
+ }
+ result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff);
+
+ wlc_lcnphy_stop_tx_tone(pi);
+
+ write_phy_reg(pi, 0x631, Core1TxControl_old);
+
+ write_phy_reg(pi, 0x44c, RFOverrideVal0_old);
+ write_phy_reg(pi, 0x44d, RFOverrideVal0_old);
+ write_phy_reg(pi, 0x4b0, rfoverride2_old);
+ write_phy_reg(pi, 0x4b1, rfoverride2val_old);
+ write_phy_reg(pi, 0x4f9, rfoverride3_old);
+ write_phy_reg(pi, 0x4fa, rfoverride3val_old);
+ write_phy_reg(pi, 0x938, rfoverride4_old);
+ write_phy_reg(pi, 0x939, rfoverride4val_old);
+ write_phy_reg(pi, 0x43b, afectrlovr_old);
+ write_phy_reg(pi, 0x43c, afectrlovrval_old);
+ write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl);
+ write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl);
+
+ wlc_lcnphy_clear_trsw_override(pi);
+
+ mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2);
+
+ for (i = 0; i < 11; i++)
+ write_radio_reg(pi, rxiq_cal_rf_reg[i],
+ values_to_save[i]);
+
+ if (tx_gain_override_old)
+ wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old);
+ else
+ wlc_lcnphy_disable_tx_gain_override(pi);
+
+ wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl);
+ wlc_lcnphy_rx_gain_override_enable(pi, false);
}
- if (set_gain)
- result = wlc_lcnphy_calc_rx_iq_comp(pi, 1024);
- else
- result = false;
-
- wlc_lcnphy_stop_tx_tone(pi);
-
- write_phy_reg(pi, 0x631, Core1TxControl_old);
-
- write_phy_reg(pi, 0x44c, RFOverrideVal0_old);
- write_phy_reg(pi, 0x44d, RFOverrideVal0_old);
- write_phy_reg(pi, 0x4b0, rfoverride2_old);
- write_phy_reg(pi, 0x4b1, rfoverride2val_old);
- write_phy_reg(pi, 0x4f9, rfoverride3_old);
- write_phy_reg(pi, 0x4fa, rfoverride3val_old);
- write_phy_reg(pi, 0x938, rfoverride4_old);
- write_phy_reg(pi, 0x939, rfoverride4val_old);
- write_phy_reg(pi, 0x43b, afectrlovr_old);
- write_phy_reg(pi, 0x43c, afectrlovrval_old);
- write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl);
- write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl);
-
- wlc_lcnphy_clear_trsw_override(pi);
-
- mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2);
-
- for (i = 0; i < 11; i++)
- write_radio_reg(pi, rxiq_cal_rf_reg[i],
- values_to_save[i]);
-
- if (tx_gain_override_old)
- wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old);
- else
- wlc_lcnphy_disable_tx_gain_override(pi);
-
- wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl);
- wlc_lcnphy_rx_gain_override_enable(pi, false);
-
cal_done:
kfree(ptr);
return result;
@@ -1829,17 +1781,6 @@
write_radio_reg(pi, RADIO_2064_REG038, 3);
write_radio_reg(pi, RADIO_2064_REG091, 7);
}
-
- if (!(pi->sh->boardflags & BFL_FEM)) {
- u8 reg038[14] = {0xd, 0xe, 0xd, 0xd, 0xd, 0xc,
- 0xa, 0xb, 0xb, 0x3, 0x3, 0x2, 0x0, 0x0};
-
- write_radio_reg(pi, RADIO_2064_REG02A, 0xf);
- write_radio_reg(pi, RADIO_2064_REG091, 0x3);
- write_radio_reg(pi, RADIO_2064_REG038, 0x3);
-
- write_radio_reg(pi, RADIO_2064_REG038, reg038[channel - 1]);
- }
}
static int
@@ -2034,16 +1975,6 @@
} else {
mod_radio_reg(pi, RADIO_2064_REG03A, 1, 0x1);
mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8);
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x4, 1<<2);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x10, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x10, 1<<4);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x77);
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, 0xe<<1);
- mod_radio_reg(pi, RADIO_2064_REG112, 0x80, 1<<7);
- mod_radio_reg(pi, RADIO_2064_REG005, 0x7, 1<<1);
- mod_radio_reg(pi, RADIO_2064_REG029, 0xf0, 0<<4);
}
} else {
mod_phy_reg(pi, 0x4d9, (0x1 << 2), (0x1) << 2);
@@ -2130,14 +2061,12 @@
(auxpga_vmid_temp << 0) | (auxpga_gain_temp << 12));
mod_radio_reg(pi, RADIO_2064_REG082, (1 << 5), (1 << 5));
- mod_radio_reg(pi, RADIO_2064_REG07C, (1 << 0), (1 << 0));
}
static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
{
struct phytbl_info tab;
u32 rfseq, ind;
- u8 tssi_sel;
tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL;
tab.tbl_width = 32;
@@ -2159,13 +2088,7 @@
mod_phy_reg(pi, 0x503, (0x1 << 4), (1) << 4);
- if (pi->sh->boardflags & BFL_FEM) {
- tssi_sel = 0x1;
- wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT);
- } else {
- tssi_sel = 0xe;
- wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_POST_PA);
- }
+ wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT);
mod_phy_reg(pi, 0x4a4, (0x1 << 14), (0) << 14);
mod_phy_reg(pi, 0x4a4, (0x1 << 15), (1) << 15);
@@ -2201,10 +2124,9 @@
mod_phy_reg(pi, 0x49a, (0x1ff << 0), (0xff) << 0);
if (LCNREV_IS(pi->pubpi.phy_rev, 2)) {
- mod_radio_reg(pi, RADIO_2064_REG028, 0xf, tssi_sel);
+ mod_radio_reg(pi, RADIO_2064_REG028, 0xf, 0xe);
mod_radio_reg(pi, RADIO_2064_REG086, 0x4, 0x4);
} else {
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, tssi_sel << 1);
mod_radio_reg(pi, RADIO_2064_REG03A, 0x1, 1);
mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 1 << 3);
}
@@ -2251,10 +2173,6 @@
mod_phy_reg(pi, 0x4d7, (0xf << 8), (0) << 8);
- mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8);
-
wlc_lcnphy_pwrctrl_rssiparams(pi);
}
@@ -2873,8 +2791,6 @@
read_radio_reg(pi, RADIO_2064_REG007) & 1;
u16 SAVE_jtag_auxpga = read_radio_reg(pi, RADIO_2064_REG0FF) & 0x10;
u16 SAVE_iqadc_aux_en = read_radio_reg(pi, RADIO_2064_REG11F) & 4;
- u8 SAVE_bbmult = wlc_lcnphy_get_bbmult(pi);
-
idleTssi = read_phy_reg(pi, 0x4ab);
suspend = (0 == (bcma_read32(pi->d11core, D11REGOFFS(maccontrol)) &
MCTL_EN_MAC));
@@ -2892,12 +2808,6 @@
mod_radio_reg(pi, RADIO_2064_REG0FF, 0x10, 1 << 4);
mod_radio_reg(pi, RADIO_2064_REG11F, 0x4, 1 << 2);
wlc_lcnphy_tssi_setup(pi);
-
- mod_phy_reg(pi, 0x4d7, (0x1 << 0), (1 << 0));
- mod_phy_reg(pi, 0x4d7, (0x1 << 6), (1 << 6));
-
- wlc_lcnphy_set_bbmult(pi, 0x0);
-
wlc_phy_do_dummy_tx(pi, true, OFF);
idleTssi = ((read_phy_reg(pi, 0x4ab) & (0x1ff << 0))
>> 0);
@@ -2919,7 +2829,6 @@
mod_phy_reg(pi, 0x44c, (0x1 << 12), (0) << 12);
- wlc_lcnphy_set_bbmult(pi, SAVE_bbmult);
wlc_lcnphy_set_tx_gain_override(pi, tx_gain_override_old);
wlc_lcnphy_set_tx_gain(pi, &old_gains);
wlc_lcnphy_set_tx_pwr_ctrl(pi, SAVE_txpwrctrl);
@@ -3133,11 +3042,6 @@
wlc_lcnphy_write_table(pi, &tab);
tab.tbl_offset++;
}
- mod_phy_reg(pi, 0x4d0, (0x1 << 0), (0) << 0);
- mod_phy_reg(pi, 0x4d3, (0xff << 0), (0) << 0);
- mod_phy_reg(pi, 0x4d3, (0xff << 8), (0) << 8);
- mod_phy_reg(pi, 0x4d0, (0x1 << 4), (0) << 4);
- mod_phy_reg(pi, 0x4d0, (0x1 << 2), (0) << 2);
mod_phy_reg(pi, 0x410, (0x1 << 7), (0) << 7);
@@ -3939,6 +3843,7 @@
target_gains.pad_gain = 21;
target_gains.dac_gain = 0;
wlc_lcnphy_set_tx_gain(pi, &target_gains);
+ wlc_lcnphy_set_tx_pwr_by_index(pi, 16);
if (LCNREV_IS(pi->pubpi.phy_rev, 1) || pi_lcn->lcnphy_hw_iqcal_en) {
@@ -3949,7 +3854,6 @@
lcnphy_recal ? LCNPHY_CAL_RECAL :
LCNPHY_CAL_FULL), false);
} else {
- wlc_lcnphy_set_tx_pwr_by_index(pi, 16);
wlc_lcnphy_tx_iqlo_soft_cal_full(pi);
}
@@ -4374,22 +4278,17 @@
if (CHSPEC_IS5G(pi->radio_chanspec))
pa_gain = 0x70;
else
- pa_gain = 0x60;
+ pa_gain = 0x70;
if (pi->sh->boardflags & BFL_FEM)
pa_gain = 0x10;
-
tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL;
tab.tbl_width = 32;
tab.tbl_len = 1;
tab.tbl_ptr = &val;
for (j = 0; j < 128; j++) {
- if (pi->sh->boardflags & BFL_FEM)
- gm_gain = gain_table[j].gm;
- else
- gm_gain = 15;
-
+ gm_gain = gain_table[j].gm;
val = (((u32) pa_gain << 24) |
(gain_table[j].pad << 16) |
(gain_table[j].pga << 8) | gm_gain);
@@ -4600,10 +4499,7 @@
write_phy_reg(pi, 0x4ea, 0x4688);
- if (pi->sh->boardflags & BFL_FEM)
- mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
- else
- mod_phy_reg(pi, 0x4eb, (0x7 << 0), 3 << 0);
+ mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
mod_phy_reg(pi, 0x4eb, (0x7 << 6), 0 << 6);
@@ -4614,13 +4510,6 @@
wlc_lcnphy_rcal(pi);
wlc_lcnphy_rc_cal(pi);
-
- if (!(pi->sh->boardflags & BFL_FEM)) {
- write_radio_reg(pi, RADIO_2064_REG032, 0x6f);
- write_radio_reg(pi, RADIO_2064_REG033, 0x19);
- write_radio_reg(pi, RADIO_2064_REG039, 0xe);
- }
-
}
static void wlc_lcnphy_radio_init(struct brcms_phy *pi)
@@ -4650,20 +4539,22 @@
wlc_lcnphy_write_table(pi, &tab);
}
- if (!(pi->sh->boardflags & BFL_FEM)) {
- tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
- tab.tbl_width = 16;
- tab.tbl_ptr = &val;
- tab.tbl_len = 1;
+ tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
+ tab.tbl_width = 16;
+ tab.tbl_ptr = &val;
+ tab.tbl_len = 1;
- val = 150;
- tab.tbl_offset = 0;
- wlc_lcnphy_write_table(pi, &tab);
+ val = 114;
+ tab.tbl_offset = 0;
+ wlc_lcnphy_write_table(pi, &tab);
- val = 220;
- tab.tbl_offset = 1;
- wlc_lcnphy_write_table(pi, &tab);
- }
+ val = 130;
+ tab.tbl_offset = 1;
+ wlc_lcnphy_write_table(pi, &tab);
+
+ val = 6;
+ tab.tbl_offset = 8;
+ wlc_lcnphy_write_table(pi, &tab);
if (CHSPEC_IS2G(pi->radio_chanspec)) {
if (pi->sh->boardflags & BFL_FEM)
@@ -5055,7 +4946,6 @@
wlc_lcnphy_load_tx_iir_filter(pi, true, 3);
mod_phy_reg(pi, 0x4eb, (0x7 << 3), (1) << 3);
- wlc_lcnphy_tssi_setup(pi);
}
void wlc_phy_detach_lcnphy(struct brcms_phy *pi)
@@ -5094,7 +4984,8 @@
if (!wlc_phy_txpwr_srom_read_lcnphy(pi))
return false;
- if (LCNREV_IS(pi->pubpi.phy_rev, 1)) {
+ if ((pi->sh->boardflags & BFL_FEM) &&
+ (LCNREV_IS(pi->pubpi.phy_rev, 1))) {
if (pi_lcn->lcnphy_tempsense_option == 3) {
pi->hwpwrctrl = true;
pi->hwpwrctrl_capable = true;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
index b7e95ac..622c01c 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c
@@ -1992,70 +1992,70 @@
};
static const u16 dot11lcn_sw_ctrl_tbl_4313_rev0[] = {
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
+ 0x0005,
+ 0x000a,
+ 0x0009,
+ 0x0006,
+ 0x0005,
};
static const u16 dot11lcn_sw_ctrl_tbl_rev0[] = {
diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c
index e8324b5..6c7493c 100644
--- a/drivers/net/wireless/iwlegacy/4965-rs.c
+++ b/drivers/net/wireless/iwlegacy/4965-rs.c
@@ -2152,7 +2152,7 @@
int rate_idx;
int i;
u32 rate;
- u8 use_green = il4965_rs_use_green(il, sta);
+ u8 use_green;
u8 active_tbl = 0;
u8 valid_tx_ant;
struct il_station_priv *sta_priv;
@@ -2160,6 +2160,7 @@
if (!sta || !lq_sta)
return;
+ use_green = il4965_rs_use_green(il, sta);
sta_priv = (void *)sta->drv_priv;
i = lq_sta->last_txrate_idx;
diff --git a/drivers/net/wireless/iwlwifi/dvm/lib.c b/drivers/net/wireless/iwlwifi/dvm/lib.c
index 86ea5f4..44ca0e5 100644
--- a/drivers/net/wireless/iwlwifi/dvm/lib.c
+++ b/drivers/net/wireless/iwlwifi/dvm/lib.c
@@ -1262,6 +1262,15 @@
}
/*
+ * This can happen upon FW ASSERT: we clear the STATUS_FW_ERROR flag
+ * in iwl_down but cancel the workers only later.
+ */
+ if (!priv->ucode_loaded) {
+ IWL_ERR(priv, "Fw not loaded - dropping CMD: %x\n", cmd->id);
+ return -EIO;
+ }
+
+ /*
* Synchronous commands from this op-mode must hold
* the mutex, this ensures we don't try to send two
* (or more) synchronous commands at a time.
diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c
index 23be948..a82b6b3 100644
--- a/drivers/net/wireless/iwlwifi/dvm/rxon.c
+++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c
@@ -1419,6 +1419,14 @@
mutex_lock(&priv->mutex);
+ if (changes & BSS_CHANGED_IDLE && bss_conf->idle) {
+ /*
+ * If we go idle, then clearly no "passive-no-rx"
+ * workaround is needed any more, this is a reset.
+ */
+ iwlagn_lift_passive_no_rx(priv);
+ }
+
if (unlikely(!iwl_is_ready(priv))) {
IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
mutex_unlock(&priv->mutex);
@@ -1450,16 +1458,6 @@
priv->timestamp = bss_conf->sync_tsf;
ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
} else {
- /*
- * If we disassociate while there are pending
- * frames, just wake up the queues and let the
- * frames "escape" ... This shouldn't really
- * be happening to start with, but we should
- * not get stuck in this case either since it
- * can happen if userspace gets confused.
- */
- iwlagn_lift_passive_no_rx(priv);
-
ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
if (ctx->ctxid == IWL_RXON_CTX_BSS)
diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c
index 6aec2df..d1a670d 100644
--- a/drivers/net/wireless/iwlwifi/dvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/dvm/tx.c
@@ -1192,7 +1192,7 @@
memset(&info->status, 0, sizeof(info->status));
if (status == TX_STATUS_FAIL_PASSIVE_NO_RX &&
- iwl_is_associated_ctx(ctx) && ctx->vif &&
+ ctx->vif &&
ctx->vif->type == NL80211_IFTYPE_STATION) {
/* block and stop all queues */
priv->passive_no_rx = true;
diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c
index 736fe9b..1a4ac92 100644
--- a/drivers/net/wireless/iwlwifi/dvm/ucode.c
+++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c
@@ -367,6 +367,8 @@
return -EIO;
}
+ priv->ucode_loaded = true;
+
if (ucode_type != IWL_UCODE_WOWLAN) {
/* delay a bit to give rfkill time to run */
msleep(5);
@@ -380,8 +382,6 @@
return ret;
}
- priv->ucode_loaded = true;
-
return 0;
}
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 17bedc5..12c4f31 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -475,6 +475,10 @@
/* If platform's RF_KILL switch is NOT set to KILL */
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
if (hw_rfkill && !run_in_rfkill)
return -ERFKILL;
@@ -641,6 +645,7 @@
static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
{
+ struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
bool hw_rfkill;
int err;
@@ -656,6 +661,10 @@
iwl_enable_rfkill_int(trans);
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
return 0;
@@ -694,6 +703,10 @@
* op_mode.
*/
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
}
}
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 8595c16..cb5c679 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -1264,7 +1264,7 @@
for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
int copy = 0;
- if (!cmd->len)
+ if (!cmd->len[i])
continue;
/* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index a44023a..8aaf56a 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1892,7 +1892,8 @@
}
}
- for (i = 0; i < request->n_channels; i++) {
+ for (i = 0; i < min_t(u32, request->n_channels,
+ MWIFIEX_USER_SCAN_CHAN_MAX); i++) {
chan = request->channels[i];
priv->user_scan_cfg->chan_list[i].chan_number = chan->hw_value;
priv->user_scan_cfg->chan_list[i].radio_type = chan->band;
diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 5c395e2..feb2046 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -1508,6 +1508,7 @@
}
memcpy(adapter->upld_buf, skb->data,
min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len));
+ skb_push(skb, INTF_HEADER_LEN);
if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE,
PCI_DMA_FROMDEVICE))
return -1;
diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c
index eef38cf..ca33ae1 100644
--- a/drivers/nfc/microread/mei.c
+++ b/drivers/nfc/microread/mei.c
@@ -22,7 +22,7 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
-#include <linux/mei_bus.h>
+#include <linux/mei_cl_bus.h>
#include <linux/nfc.h>
#include <net/nfc/hci.h>
@@ -32,9 +32,6 @@
#define MICROREAD_DRIVER_NAME "microread"
-#define MICROREAD_UUID UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, 0x94, \
- 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c)
-
struct mei_nfc_hdr {
u8 cmd;
u8 status;
@@ -48,7 +45,7 @@
#define MEI_NFC_MAX_READ (MEI_NFC_HEADER_SIZE + MEI_NFC_MAX_HCI_PAYLOAD)
struct microread_mei_phy {
- struct mei_device *mei_device;
+ struct mei_cl_device *device;
struct nfc_hci_dev *hdev;
int powered;
@@ -105,14 +102,14 @@
MEI_DUMP_SKB_OUT("mei frame sent", skb);
- r = mei_send(phy->device, skb->data, skb->len);
+ r = mei_cl_send(phy->device, skb->data, skb->len);
if (r > 0)
r = 0;
return r;
}
-static void microread_event_cb(struct mei_device *device, u32 events,
+static void microread_event_cb(struct mei_cl_device *device, u32 events,
void *context)
{
struct microread_mei_phy *phy = context;
@@ -120,7 +117,7 @@
if (phy->hard_fault != 0)
return;
- if (events & BIT(MEI_EVENT_RX)) {
+ if (events & BIT(MEI_CL_EVENT_RX)) {
struct sk_buff *skb;
int reply_size;
@@ -128,7 +125,7 @@
if (!skb)
return;
- reply_size = mei_recv(device, skb->data, MEI_NFC_MAX_READ);
+ reply_size = mei_cl_recv(device, skb->data, MEI_NFC_MAX_READ);
if (reply_size < MEI_NFC_HEADER_SIZE) {
kfree(skb);
return;
@@ -149,8 +146,8 @@
.disable = microread_mei_disable,
};
-static int microread_mei_probe(struct mei_device *device,
- const struct mei_id *id)
+static int microread_mei_probe(struct mei_cl_device *device,
+ const struct mei_cl_device_id *id)
{
struct microread_mei_phy *phy;
int r;
@@ -164,9 +161,9 @@
}
phy->device = device;
- mei_set_clientdata(device, phy);
+ mei_cl_set_drvdata(device, phy);
- r = mei_register_event_cb(device, microread_event_cb, phy);
+ r = mei_cl_register_event_cb(device, microread_event_cb, phy);
if (r) {
pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n");
goto err_out;
@@ -186,9 +183,9 @@
return r;
}
-static int microread_mei_remove(struct mei_device *device)
+static int microread_mei_remove(struct mei_cl_device *device)
{
- struct microread_mei_phy *phy = mei_get_clientdata(device);
+ struct microread_mei_phy *phy = mei_cl_get_drvdata(device);
pr_info("Removing microread\n");
@@ -202,16 +199,15 @@
return 0;
}
-static struct mei_id microread_mei_tbl[] = {
- { MICROREAD_DRIVER_NAME, MICROREAD_UUID },
+static struct mei_cl_device_id microread_mei_tbl[] = {
+ { MICROREAD_DRIVER_NAME },
/* required last entry */
{ }
};
-
MODULE_DEVICE_TABLE(mei, microread_mei_tbl);
-static struct mei_driver microread_driver = {
+static struct mei_cl_driver microread_driver = {
.id_table = microread_mei_tbl,
.name = MICROREAD_DRIVER_NAME,
@@ -225,7 +221,7 @@
pr_debug(DRIVER_DESC ": %s\n", __func__);
- r = mei_driver_register(µread_driver);
+ r = mei_cl_driver_register(µread_driver);
if (r) {
pr_err(MICROREAD_DRIVER_NAME ": driver registration failed\n");
return r;
@@ -236,7 +232,7 @@
static void microread_mei_exit(void)
{
- mei_driver_unregister(µread_driver);
+ mei_cl_driver_unregister(µread_driver);
}
module_init(microread_mei_init);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index dee5ddd..5147c21 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -53,14 +53,15 @@
return;
}
- if (!pci_dev->pm_cap || !pci_dev->pme_support
- || pci_check_pme_status(pci_dev)) {
- if (pci_dev->pme_poll)
- pci_dev->pme_poll = false;
+ /* Clear PME Status if set. */
+ if (pci_dev->pme_support)
+ pci_check_pme_status(pci_dev);
- pci_wakeup_event(pci_dev);
- pm_runtime_resume(&pci_dev->dev);
- }
+ if (pci_dev->pme_poll)
+ pci_dev->pme_poll = false;
+
+ pci_wakeup_event(pci_dev);
+ pm_runtime_resume(&pci_dev->dev);
if (pci_dev->subordinate)
pci_pme_wakeup_bus(pci_dev->subordinate);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 1fa1e48..79277fb 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -390,9 +390,10 @@
/*
* Turn off Bus Master bit on the device to tell it to not
- * continue to do DMA
+ * continue to do DMA. Don't touch devices in D3cold or unknown states.
*/
- pci_clear_master(pci_dev);
+ if (pci_dev->current_state <= PCI_D3hot)
+ pci_clear_master(pci_dev);
}
#ifdef CONFIG_PM
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 08c243a..ed4d094 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -185,14 +185,6 @@
#endif /* !PM */
/*
- * PCIe port runtime suspend is broken for some chipsets, so use a
- * black list to disable runtime PM for these chipsets.
- */
-static const struct pci_device_id port_runtime_pm_black_list[] = {
- { /* end: all zeroes */ }
-};
-
-/*
* pcie_portdrv_probe - Probe PCI-Express port devices
* @dev: PCI-Express port device being probed
*
@@ -225,16 +217,11 @@
* it by default.
*/
dev->d3cold_allowed = false;
- if (!pci_match_id(port_runtime_pm_black_list, dev))
- pm_runtime_put_noidle(&dev->dev);
-
return 0;
}
static void pcie_portdrv_remove(struct pci_dev *dev)
{
- if (!pci_match_id(port_runtime_pm_black_list, dev))
- pm_runtime_get_noresume(&dev->dev);
pcie_port_device_remove(dev);
pci_disable_device(dev);
}
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index b41ac77..c5d0a08 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -100,27 +100,6 @@
return min((size_t)(image - rom), size);
}
-static loff_t pci_find_rom(struct pci_dev *pdev, size_t *size)
-{
- struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
- loff_t start;
-
- /* assign the ROM an address if it doesn't have one */
- if (res->parent == NULL && pci_assign_resource(pdev, PCI_ROM_RESOURCE))
- return 0;
- start = pci_resource_start(pdev, PCI_ROM_RESOURCE);
- *size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
-
- if (*size == 0)
- return 0;
-
- /* Enable ROM space decodes */
- if (pci_enable_rom(pdev))
- return 0;
-
- return start;
-}
-
/**
* pci_map_rom - map a PCI ROM to kernel space
* @pdev: pointer to pci device struct
@@ -135,7 +114,7 @@
void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
{
struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
- loff_t start = 0;
+ loff_t start;
void __iomem *rom;
/*
@@ -154,21 +133,21 @@
return (void __iomem *)(unsigned long)
pci_resource_start(pdev, PCI_ROM_RESOURCE);
} else {
- start = pci_find_rom(pdev, size);
+ /* assign the ROM an address if it doesn't have one */
+ if (res->parent == NULL &&
+ pci_assign_resource(pdev,PCI_ROM_RESOURCE))
+ return NULL;
+ start = pci_resource_start(pdev, PCI_ROM_RESOURCE);
+ *size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
+ if (*size == 0)
+ return NULL;
+
+ /* Enable ROM space decodes */
+ if (pci_enable_rom(pdev))
+ return NULL;
}
}
- /*
- * Some devices may provide ROMs via a source other than the BAR
- */
- if (!start && pdev->rom && pdev->romlen) {
- *size = pdev->romlen;
- return phys_to_virt(pdev->rom);
- }
-
- if (!start)
- return NULL;
-
rom = ioremap(start, *size);
if (!rom) {
/* restore enable if ioremap fails */
@@ -202,8 +181,7 @@
if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY))
return;
- if (!pdev->rom || !pdev->romlen)
- iounmap(rom);
+ iounmap(rom);
/* Disable again before continuing, leave enabled if pci=rom */
if (!(res->flags & (IORESOURCE_ROM_ENABLE | IORESOURCE_ROM_SHADOW)))
@@ -227,7 +205,24 @@
}
}
+/**
+ * pci_platform_rom - provides a pointer to any ROM image provided by the
+ * platform
+ * @pdev: pointer to pci device struct
+ * @size: pointer to receive size of pci window over ROM
+ */
+void __iomem *pci_platform_rom(struct pci_dev *pdev, size_t *size)
+{
+ if (pdev->rom && pdev->romlen) {
+ *size = pdev->romlen;
+ return phys_to_virt((phys_addr_t)pdev->rom);
+ }
+
+ return NULL;
+}
+
EXPORT_SYMBOL(pci_map_rom);
EXPORT_SYMBOL(pci_unmap_rom);
EXPORT_SYMBOL_GPL(pci_enable_rom);
EXPORT_SYMBOL_GPL(pci_disable_rom);
+EXPORT_SYMBOL(pci_platform_rom);
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 0a9f27e..434ebc3 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -44,7 +44,6 @@
static unsigned int at91_alarm_year = AT91_RTC_EPOCH;
static void __iomem *at91_rtc_regs;
static int irq;
-static u32 at91_rtc_imr;
/*
* Decode time/date into rtc_time structure
@@ -109,11 +108,9 @@
cr = at91_rtc_read(AT91_RTC_CR);
at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM);
- at91_rtc_imr |= AT91_RTC_ACKUPD;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ACKUPD);
wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD);
- at91_rtc_imr &= ~AT91_RTC_ACKUPD;
at91_rtc_write(AT91_RTC_TIMR,
bin2bcd(tm->tm_sec) << 0
@@ -145,7 +142,7 @@
tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
tm->tm_year = at91_alarm_year - 1900;
- alrm->enabled = (at91_rtc_imr & AT91_RTC_ALARM)
+ alrm->enabled = (at91_rtc_read(AT91_RTC_IMR) & AT91_RTC_ALARM)
? 1 : 0;
dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
@@ -171,7 +168,6 @@
tm.tm_sec = alrm->time.tm_sec;
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
- at91_rtc_imr &= ~AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_TIMALR,
bin2bcd(tm.tm_sec) << 0
| bin2bcd(tm.tm_min) << 8
@@ -184,7 +180,6 @@
if (alrm->enabled) {
at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
- at91_rtc_imr |= AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
}
@@ -201,12 +196,9 @@
if (enabled) {
at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
- at91_rtc_imr |= AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
- } else {
+ } else
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
- at91_rtc_imr &= ~AT91_RTC_ALARM;
- }
return 0;
}
@@ -215,10 +207,12 @@
*/
static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
{
+ unsigned long imr = at91_rtc_read(AT91_RTC_IMR);
+
seq_printf(seq, "update_IRQ\t: %s\n",
- (at91_rtc_imr & AT91_RTC_ACKUPD) ? "yes" : "no");
+ (imr & AT91_RTC_ACKUPD) ? "yes" : "no");
seq_printf(seq, "periodic_IRQ\t: %s\n",
- (at91_rtc_imr & AT91_RTC_SECEV) ? "yes" : "no");
+ (imr & AT91_RTC_SECEV) ? "yes" : "no");
return 0;
}
@@ -233,7 +227,7 @@
unsigned int rtsr;
unsigned long events = 0;
- rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_imr;
+ rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read(AT91_RTC_IMR);
if (rtsr) { /* this interrupt is shared! Is it ours? */
if (rtsr & AT91_RTC_ALARM)
events |= (RTC_AF | RTC_IRQF);
@@ -297,7 +291,6 @@
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
- at91_rtc_imr = 0;
ret = request_irq(irq, at91_rtc_interrupt,
IRQF_SHARED,
@@ -336,7 +329,6 @@
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
- at91_rtc_imr = 0;
free_irq(irq, pdev);
rtc_device_unregister(rtc);
@@ -349,35 +341,31 @@
/* AT91RM9200 RTC Power management control */
-static u32 at91_rtc_bkpimr;
-
+static u32 at91_rtc_imr;
static int at91_rtc_suspend(struct device *dev)
{
/* this IRQ is shared with DBGU and other hardware which isn't
* necessarily doing PM like we are...
*/
- at91_rtc_bkpimr = at91_rtc_imr & (AT91_RTC_ALARM|AT91_RTC_SECEV);
- if (at91_rtc_bkpimr) {
- if (device_may_wakeup(dev)) {
+ at91_rtc_imr = at91_rtc_read(AT91_RTC_IMR)
+ & (AT91_RTC_ALARM|AT91_RTC_SECEV);
+ if (at91_rtc_imr) {
+ if (device_may_wakeup(dev))
enable_irq_wake(irq);
- } else {
- at91_rtc_write(AT91_RTC_IDR, at91_rtc_bkpimr);
- at91_rtc_imr &= ~at91_rtc_bkpimr;
- }
-}
+ else
+ at91_rtc_write(AT91_RTC_IDR, at91_rtc_imr);
+ }
return 0;
}
static int at91_rtc_resume(struct device *dev)
{
- if (at91_rtc_bkpimr) {
- if (device_may_wakeup(dev)) {
+ if (at91_rtc_imr) {
+ if (device_may_wakeup(dev))
disable_irq_wake(irq);
- } else {
- at91_rtc_imr |= at91_rtc_bkpimr;
- at91_rtc_write(AT91_RTC_IER, at91_rtc_bkpimr);
- }
+ else
+ at91_rtc_write(AT91_RTC_IER, at91_rtc_imr);
}
return 0;
}
diff --git a/drivers/rtc/rtc-at91rm9200.h b/drivers/rtc/rtc-at91rm9200.h
index 5f940b6..da1945e 100644
--- a/drivers/rtc/rtc-at91rm9200.h
+++ b/drivers/rtc/rtc-at91rm9200.h
@@ -64,6 +64,7 @@
#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */
#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */
#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */
+#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */
#define AT91_RTC_VER 0x2c /* Valid Entry Register */
#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
diff --git a/drivers/s390/block/scm_blk.c b/drivers/s390/block/scm_blk.c
index 5ac9c93..e9b9c83 100644
--- a/drivers/s390/block/scm_blk.c
+++ b/drivers/s390/block/scm_blk.c
@@ -307,7 +307,7 @@
case EQC_WR_PROHIBIT:
spin_lock_irqsave(&bdev->lock, flags);
if (bdev->state != SCM_WR_PROHIBIT)
- pr_info("%lu: Write access to the SCM increment is suspended\n",
+ pr_info("%lx: Write access to the SCM increment is suspended\n",
(unsigned long) bdev->scmdev->address);
bdev->state = SCM_WR_PROHIBIT;
spin_unlock_irqrestore(&bdev->lock, flags);
@@ -445,7 +445,7 @@
spin_lock_irqsave(&bdev->lock, flags);
if (bdev->state == SCM_WR_PROHIBIT)
- pr_info("%lu: Write access to the SCM increment is restored\n",
+ pr_info("%lx: Write access to the SCM increment is restored\n",
(unsigned long) bdev->scmdev->address);
bdev->state = SCM_OPER;
spin_unlock_irqrestore(&bdev->lock, flags);
@@ -463,12 +463,15 @@
goto out;
scm_major = ret;
- if (scm_alloc_rqs(nr_requests))
+ ret = scm_alloc_rqs(nr_requests);
+ if (ret)
goto out_unreg;
scm_debug = debug_register("scm_log", 16, 1, 16);
- if (!scm_debug)
+ if (!scm_debug) {
+ ret = -ENOMEM;
goto out_free;
+ }
debug_register_view(scm_debug, &debug_hex_ascii_view);
debug_set_level(scm_debug, 2);
diff --git a/drivers/s390/block/scm_drv.c b/drivers/s390/block/scm_drv.c
index 5f6180d..c98cf52 100644
--- a/drivers/s390/block/scm_drv.c
+++ b/drivers/s390/block/scm_drv.c
@@ -19,7 +19,7 @@
switch (event) {
case SCM_CHANGE:
- pr_info("%lu: The capabilities of the SCM increment changed\n",
+ pr_info("%lx: The capabilities of the SCM increment changed\n",
(unsigned long) scmdev->address);
SCM_LOG(2, "State changed");
SCM_LOG_STATE(2, scmdev);
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index b907dba..cee69da 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -915,7 +915,7 @@
int i, rc;
/* Check if the tty3270 is already there. */
- view = raw3270_find_view(&tty3270_fn, tty->index);
+ view = raw3270_find_view(&tty3270_fn, tty->index + RAW3270_FIRSTMINOR);
if (!IS_ERR(view)) {
tp = container_of(view, struct tty3270, view);
tty->driver_data = tp;
@@ -927,15 +927,16 @@
tp->inattr = TF_INPUT;
return tty_port_install(&tp->port, driver, tty);
}
- if (tty3270_max_index < tty->index)
- tty3270_max_index = tty->index;
+ if (tty3270_max_index < tty->index + 1)
+ tty3270_max_index = tty->index + 1;
/* Allocate tty3270 structure on first open. */
tp = tty3270_alloc_view();
if (IS_ERR(tp))
return PTR_ERR(tp);
- rc = raw3270_add_view(&tp->view, &tty3270_fn, tty->index);
+ rc = raw3270_add_view(&tp->view, &tty3270_fn,
+ tty->index + RAW3270_FIRSTMINOR);
if (rc) {
tty3270_free_view(tp);
return rc;
@@ -1846,12 +1847,12 @@
void tty3270_create_cb(int minor)
{
- tty_register_device(tty3270_driver, minor, NULL);
+ tty_register_device(tty3270_driver, minor - RAW3270_FIRSTMINOR, NULL);
}
void tty3270_destroy_cb(int minor)
{
- tty_unregister_device(tty3270_driver, minor);
+ tty_unregister_device(tty3270_driver, minor - RAW3270_FIRSTMINOR);
}
struct raw3270_notifier tty3270_notifier =
@@ -1884,7 +1885,8 @@
driver->driver_name = "tty3270";
driver->name = "3270/tty";
driver->major = IBM_TTY3270_MAJOR;
- driver->minor_start = 0;
+ driver->minor_start = RAW3270_FIRSTMINOR;
+ driver->name_base = RAW3270_FIRSTMINOR;
driver->type = TTY_DRIVER_TYPE_SYSTEM;
driver->subtype = SYSTEM_TYPE_TTY;
driver->init_termios = tty_std_termios;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 2daf4b0..90bc7bd 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -940,6 +940,7 @@
fc_exch_init(lport);
fc_rport_init(lport);
fc_disc_init(lport);
+ fc_disc_config(lport, lport);
return 0;
}
@@ -2133,6 +2134,7 @@
}
ctlr = bnx2fc_to_ctlr(interface);
+ cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
interface->vlan_id = vlan_id;
interface->timer_work_queue =
@@ -2143,7 +2145,7 @@
goto ifput_err;
}
- lport = bnx2fc_if_create(interface, &interface->hba->pcidev->dev, 0);
+ lport = bnx2fc_if_create(interface, &cdev->dev, 0);
if (!lport) {
printk(KERN_ERR PFX "Failed to create interface (%s)\n",
netdev->name);
@@ -2159,8 +2161,6 @@
/* Make this master N_port */
ctlr->lp = lport;
- cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
-
if (link_state == BNX2FC_CREATE_LINK_UP)
cdev->enabled = FCOE_CTLR_ENABLED;
else
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index b5d92fc..9bfdc9a 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -490,7 +490,6 @@
{
struct net_device *netdev = fcoe->netdev;
struct fcoe_ctlr *fip = fcoe_to_ctlr(fcoe);
- struct fcoe_ctlr_device *ctlr_dev = fcoe_ctlr_to_ctlr_dev(fip);
rtnl_lock();
if (!fcoe->removed)
@@ -501,7 +500,6 @@
/* tear-down the FCoE controller */
fcoe_ctlr_destroy(fip);
scsi_host_put(fip->lp->host);
- fcoe_ctlr_device_delete(ctlr_dev);
dev_put(netdev);
module_put(THIS_MODULE);
}
@@ -2194,6 +2192,8 @@
*/
static void fcoe_destroy_work(struct work_struct *work)
{
+ struct fcoe_ctlr_device *cdev;
+ struct fcoe_ctlr *ctlr;
struct fcoe_port *port;
struct fcoe_interface *fcoe;
struct Scsi_Host *shost;
@@ -2224,10 +2224,15 @@
mutex_lock(&fcoe_config_mutex);
fcoe = port->priv;
+ ctlr = fcoe_to_ctlr(fcoe);
+ cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
+
fcoe_if_destroy(port->lport);
fcoe_interface_cleanup(fcoe);
mutex_unlock(&fcoe_config_mutex);
+
+ fcoe_ctlr_device_delete(cdev);
}
/**
@@ -2335,7 +2340,9 @@
rc = -EIO;
rtnl_unlock();
fcoe_interface_cleanup(fcoe);
- goto out_nortnl;
+ mutex_unlock(&fcoe_config_mutex);
+ fcoe_ctlr_device_delete(ctlr_dev);
+ goto out;
}
/* Make this the "master" N_Port */
@@ -2375,8 +2382,8 @@
out_nodev:
rtnl_unlock();
-out_nortnl:
mutex_unlock(&fcoe_config_mutex);
+out:
return rc;
}
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 08c3bc3..a762472 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -2815,6 +2815,47 @@
}
/**
+ * fcoe_ctlr_mode_set() - Set or reset the ctlr's mode
+ * @lport: The local port to be (re)configured
+ * @fip: The FCoE controller whose mode is changing
+ * @fip_mode: The new fip mode
+ *
+ * Note that the we shouldn't be changing the libfc discovery settings
+ * (fc_disc_config) while an lport is going through the libfc state
+ * machine. The mode can only be changed when a fcoe_ctlr device is
+ * disabled, so that should ensure that this routine is only called
+ * when nothing is happening.
+ */
+void fcoe_ctlr_mode_set(struct fc_lport *lport, struct fcoe_ctlr *fip,
+ enum fip_state fip_mode)
+{
+ void *priv;
+
+ WARN_ON(lport->state != LPORT_ST_RESET &&
+ lport->state != LPORT_ST_DISABLED);
+
+ if (fip_mode == FIP_MODE_VN2VN) {
+ lport->rport_priv_size = sizeof(struct fcoe_rport);
+ lport->point_to_multipoint = 1;
+ lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
+ lport->tt.disc_start = fcoe_ctlr_disc_start;
+ lport->tt.disc_stop = fcoe_ctlr_disc_stop;
+ lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
+ priv = fip;
+ } else {
+ lport->rport_priv_size = 0;
+ lport->point_to_multipoint = 0;
+ lport->tt.disc_recv_req = NULL;
+ lport->tt.disc_start = NULL;
+ lport->tt.disc_stop = NULL;
+ lport->tt.disc_stop_final = NULL;
+ priv = lport;
+ }
+
+ fc_disc_config(lport, priv);
+}
+
+/**
* fcoe_libfc_config() - Sets up libfc related properties for local port
* @lport: The local port to configure libfc for
* @fip: The FCoE controller in use by the local port
@@ -2833,21 +2874,9 @@
fc_exch_init(lport);
fc_elsct_init(lport);
fc_lport_init(lport);
- if (fip->mode == FIP_MODE_VN2VN)
- lport->rport_priv_size = sizeof(struct fcoe_rport);
fc_rport_init(lport);
- if (fip->mode == FIP_MODE_VN2VN) {
- lport->point_to_multipoint = 1;
- lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
- lport->tt.disc_start = fcoe_ctlr_disc_start;
- lport->tt.disc_stop = fcoe_ctlr_disc_stop;
- lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
- mutex_init(&lport->disc.disc_mutex);
- INIT_LIST_HEAD(&lport->disc.rports);
- lport->disc.priv = fip;
- } else {
- fc_disc_init(lport);
- }
+ fc_disc_init(lport);
+ fcoe_ctlr_mode_set(lport, fip, fip->mode);
return 0;
}
EXPORT_SYMBOL_GPL(fcoe_libfc_config);
@@ -2875,6 +2904,7 @@
void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *ctlr_dev)
{
struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(ctlr_dev);
+ struct fc_lport *lport = ctlr->lp;
mutex_lock(&ctlr->ctlr_mutex);
switch (ctlr_dev->mode) {
@@ -2888,5 +2918,7 @@
}
mutex_unlock(&ctlr->ctlr_mutex);
+
+ fcoe_ctlr_mode_set(lport, ctlr, ctlr->mode);
}
EXPORT_SYMBOL(fcoe_ctlr_set_fip_mode);
diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index 8e561e6..880a906 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -712,12 +712,13 @@
}
/**
- * fc_disc_init() - Initialize the discovery layer for a local port
- * @lport: The local port that needs the discovery layer to be initialized
+ * fc_disc_config() - Configure the discovery layer for a local port
+ * @lport: The local port that needs the discovery layer to be configured
+ * @priv: Private data structre for users of the discovery layer
*/
-int fc_disc_init(struct fc_lport *lport)
+void fc_disc_config(struct fc_lport *lport, void *priv)
{
- struct fc_disc *disc;
+ struct fc_disc *disc = &lport->disc;
if (!lport->tt.disc_start)
lport->tt.disc_start = fc_disc_start;
@@ -732,12 +733,21 @@
lport->tt.disc_recv_req = fc_disc_recv_req;
disc = &lport->disc;
+
+ disc->priv = priv;
+}
+EXPORT_SYMBOL(fc_disc_config);
+
+/**
+ * fc_disc_init() - Initialize the discovery layer for a local port
+ * @lport: The local port that needs the discovery layer to be initialized
+ */
+void fc_disc_init(struct fc_lport *lport)
+{
+ struct fc_disc *disc = &lport->disc;
+
INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout);
mutex_init(&disc->disc_mutex);
INIT_LIST_HEAD(&disc->rports);
-
- disc->priv = lport;
-
- return 0;
}
EXPORT_SYMBOL(fc_disc_init);
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index f80eee7..2be0de9 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -55,6 +55,7 @@
config SPI_ALTERA
tristate "Altera SPI Controller"
+ depends on GENERIC_HARDIRQS
select SPI_BITBANG
help
This is the driver for the Altera SPI Controller.
@@ -310,7 +311,7 @@
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
- depends on ARCH_PXA || PCI || ACPI
+ depends on (ARCH_PXA || PCI || ACPI) && GENERIC_HARDIRQS
select PXA_SSP if ARCH_PXA
help
This enables using a PXA2xx or Sodaville SSP port as a SPI master
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 9578af7..d7df435 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -152,7 +152,6 @@
static int bcm63xx_spi_setup(struct spi_device *spi)
{
struct bcm63xx_spi *bs;
- int ret;
bs = spi_master_get_devdata(spi->master);
@@ -490,7 +489,7 @@
default:
dev_err(dev, "unsupported MSG_CTL width: %d\n",
bs->msg_ctl_width);
- goto out_clk_disable;
+ goto out_err;
}
/* Initialize hardware */
diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c
index 89480b2..3e490ee 100644
--- a/drivers/spi/spi-mpc512x-psc.c
+++ b/drivers/spi/spi-mpc512x-psc.c
@@ -164,7 +164,7 @@
for (i = count; i > 0; i--) {
data = tx_buf ? *tx_buf++ : 0;
- if (len == EOFBYTE)
+ if (len == EOFBYTE && t->cs_change)
setbits32(&fifo->txcmd, MPC512x_PSC_FIFO_EOF);
out_8(&fifo->txdata_8, data);
len--;
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index b0fe393..371cc66f 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -1139,6 +1139,35 @@
return -ENODEV;
}
+static int pl022_dma_autoprobe(struct pl022 *pl022)
+{
+ struct device *dev = &pl022->adev->dev;
+
+ /* automatically configure DMA channels from platform, normally using DT */
+ pl022->dma_rx_channel = dma_request_slave_channel(dev, "rx");
+ if (!pl022->dma_rx_channel)
+ goto err_no_rxchan;
+
+ pl022->dma_tx_channel = dma_request_slave_channel(dev, "tx");
+ if (!pl022->dma_tx_channel)
+ goto err_no_txchan;
+
+ pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!pl022->dummypage)
+ goto err_no_dummypage;
+
+ return 0;
+
+err_no_dummypage:
+ dma_release_channel(pl022->dma_tx_channel);
+ pl022->dma_tx_channel = NULL;
+err_no_txchan:
+ dma_release_channel(pl022->dma_rx_channel);
+ pl022->dma_rx_channel = NULL;
+err_no_rxchan:
+ return -ENODEV;
+}
+
static void terminate_dma(struct pl022 *pl022)
{
struct dma_chan *rxchan = pl022->dma_rx_channel;
@@ -1167,6 +1196,11 @@
return -ENODEV;
}
+static inline int pl022_dma_autoprobe(struct pl022 *pl022)
+{
+ return 0;
+}
+
static inline int pl022_dma_probe(struct pl022 *pl022)
{
return 0;
@@ -2226,8 +2260,13 @@
goto err_no_irq;
}
- /* Get DMA channels */
- if (platform_info->enable_dma) {
+ /* Get DMA channels, try autoconfiguration first */
+ status = pl022_dma_autoprobe(pl022);
+
+ /* If that failed, use channels from platform_info */
+ if (status == 0)
+ platform_info->enable_dma = 1;
+ else if (platform_info->enable_dma) {
status = pl022_dma_probe(pl022);
if (status != 0)
platform_info->enable_dma = 0;
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 90b27a3..8104138 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1168,7 +1168,6 @@
master->dev.parent = &pdev->dev;
master->dev.of_node = pdev->dev.of_node;
- ACPI_HANDLE_SET(&master->dev, ACPI_HANDLE(&pdev->dev));
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index e862ab8..4188b2f 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -994,25 +994,30 @@
{
struct s3c64xx_spi_driver_data *sdd = data;
struct spi_master *spi = sdd->master;
- unsigned int val;
+ unsigned int val, clr = 0;
- val = readl(sdd->regs + S3C64XX_SPI_PENDING_CLR);
+ val = readl(sdd->regs + S3C64XX_SPI_STATUS);
- val &= S3C64XX_SPI_PND_RX_OVERRUN_CLR |
- S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
- S3C64XX_SPI_PND_TX_OVERRUN_CLR |
- S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
-
- writel(val, sdd->regs + S3C64XX_SPI_PENDING_CLR);
-
- if (val & S3C64XX_SPI_PND_RX_OVERRUN_CLR)
+ if (val & S3C64XX_SPI_ST_RX_OVERRUN_ERR) {
+ clr = S3C64XX_SPI_PND_RX_OVERRUN_CLR;
dev_err(&spi->dev, "RX overrun\n");
- if (val & S3C64XX_SPI_PND_RX_UNDERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_RX_UNDERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_RX_UNDERRUN_CLR;
dev_err(&spi->dev, "RX underrun\n");
- if (val & S3C64XX_SPI_PND_TX_OVERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_TX_OVERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_TX_OVERRUN_CLR;
dev_err(&spi->dev, "TX overrun\n");
- if (val & S3C64XX_SPI_PND_TX_UNDERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_TX_UNDERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
dev_err(&spi->dev, "TX underrun\n");
+ }
+
+ /* Clear the pending irq by setting and then clearing it */
+ writel(clr, sdd->regs + S3C64XX_SPI_PENDING_CLR);
+ writel(0, sdd->regs + S3C64XX_SPI_PENDING_CLR);
return IRQ_HANDLED;
}
@@ -1036,9 +1041,13 @@
writel(0, regs + S3C64XX_SPI_MODE_CFG);
writel(0, regs + S3C64XX_SPI_PACKET_CNT);
- /* Clear any irq pending bits */
- writel(readl(regs + S3C64XX_SPI_PENDING_CLR),
- regs + S3C64XX_SPI_PENDING_CLR);
+ /* Clear any irq pending bits, should set and clear the bits */
+ val = S3C64XX_SPI_PND_RX_OVERRUN_CLR |
+ S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
+ S3C64XX_SPI_PND_TX_OVERRUN_CLR |
+ S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
+ writel(val, regs + S3C64XX_SPI_PENDING_CLR);
+ writel(0, regs + S3C64XX_SPI_PENDING_CLR);
writel(0, regs + S3C64XX_SPI_SWAP_CFG);
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index b8698b3..a829563 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -858,21 +858,6 @@
return 0;
}
-static int tegra_slink_prepare_transfer(struct spi_master *master)
-{
- struct tegra_slink_data *tspi = spi_master_get_devdata(master);
-
- return pm_runtime_get_sync(tspi->dev);
-}
-
-static int tegra_slink_unprepare_transfer(struct spi_master *master)
-{
- struct tegra_slink_data *tspi = spi_master_get_devdata(master);
-
- pm_runtime_put(tspi->dev);
- return 0;
-}
-
static int tegra_slink_transfer_one_message(struct spi_master *master,
struct spi_message *msg)
{
@@ -885,6 +870,12 @@
msg->status = 0;
msg->actual_length = 0;
+ ret = pm_runtime_get_sync(tspi->dev);
+ if (ret < 0) {
+ dev_err(tspi->dev, "runtime get failed: %d\n", ret);
+ goto done;
+ }
+
single_xfer = list_is_singular(&msg->transfers);
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
INIT_COMPLETION(tspi->xfer_completion);
@@ -921,6 +912,8 @@
exit:
tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND);
tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2);
+ pm_runtime_put(tspi->dev);
+done:
msg->status = ret;
spi_finalize_current_message(master);
return ret;
@@ -1148,9 +1141,7 @@
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->setup = tegra_slink_setup;
- master->prepare_transfer_hardware = tegra_slink_prepare_transfer;
master->transfer_one_message = tegra_slink_transfer_one_message;
- master->unprepare_transfer_hardware = tegra_slink_unprepare_transfer;
master->num_chipselect = MAX_CHIP_SELECT;
master->bus_num = -1;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index f996c600..004b10f 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -543,17 +543,16 @@
/* Lock queue and check for queue work */
spin_lock_irqsave(&master->queue_lock, flags);
if (list_empty(&master->queue) || !master->running) {
- if (master->busy && master->unprepare_transfer_hardware) {
- ret = master->unprepare_transfer_hardware(master);
- if (ret) {
- spin_unlock_irqrestore(&master->queue_lock, flags);
- dev_err(&master->dev,
- "failed to unprepare transfer hardware\n");
- return;
- }
+ if (!master->busy) {
+ spin_unlock_irqrestore(&master->queue_lock, flags);
+ return;
}
master->busy = false;
spin_unlock_irqrestore(&master->queue_lock, flags);
+ if (master->unprepare_transfer_hardware &&
+ master->unprepare_transfer_hardware(master))
+ dev_err(&master->dev,
+ "failed to unprepare transfer hardware\n");
return;
}
@@ -984,7 +983,7 @@
acpi_status status;
acpi_handle handle;
- handle = ACPI_HANDLE(&master->dev);
+ handle = ACPI_HANDLE(master->dev.parent);
if (!handle)
return;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3ea5408..1c1942b 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -245,7 +245,7 @@
}
}
-static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
+static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *uap)
{
/* DMA is the sole user of the platform data right now */
struct amba_pl011_data *plat = uap->port.dev->platform_data;
@@ -259,20 +259,25 @@
struct dma_chan *chan;
dma_cap_mask_t mask;
- /* We need platform data */
- if (!plat || !plat->dma_filter) {
- dev_info(uap->port.dev, "no DMA platform data\n");
- return;
- }
+ chan = dma_request_slave_channel(dev, "tx");
- /* Try to acquire a generic DMA engine slave TX channel */
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param);
if (!chan) {
- dev_err(uap->port.dev, "no TX DMA channel!\n");
- return;
+ /* We need platform data */
+ if (!plat || !plat->dma_filter) {
+ dev_info(uap->port.dev, "no DMA platform data\n");
+ return;
+ }
+
+ /* Try to acquire a generic DMA engine slave TX channel */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ chan = dma_request_channel(mask, plat->dma_filter,
+ plat->dma_tx_param);
+ if (!chan) {
+ dev_err(uap->port.dev, "no TX DMA channel!\n");
+ return;
+ }
}
dmaengine_slave_config(chan, &tx_conf);
@@ -282,7 +287,18 @@
dma_chan_name(uap->dmatx.chan));
/* Optionally make use of an RX channel as well */
- if (plat->dma_rx_param) {
+ chan = dma_request_slave_channel(dev, "rx");
+
+ if (!chan && plat->dma_rx_param) {
+ chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
+
+ if (!chan) {
+ dev_err(uap->port.dev, "no RX DMA channel!\n");
+ return;
+ }
+ }
+
+ if (chan) {
struct dma_slave_config rx_conf = {
.src_addr = uap->port.mapbase + UART01x_DR,
.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
@@ -291,12 +307,6 @@
.device_fc = false,
};
- chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
- if (!chan) {
- dev_err(uap->port.dev, "no RX DMA channel!\n");
- return;
- }
-
dmaengine_slave_config(chan, &rx_conf);
uap->dmarx.chan = chan;
@@ -315,6 +325,7 @@
struct dma_uap {
struct list_head node;
struct uart_amba_port *uap;
+ struct device *dev;
};
static LIST_HEAD(pl011_dma_uarts);
@@ -325,7 +336,7 @@
list_for_each_safe(node, tmp, &pl011_dma_uarts) {
struct dma_uap *dmau = list_entry(node, struct dma_uap, node);
- pl011_dma_probe_initcall(dmau->uap);
+ pl011_dma_probe_initcall(dmau->dev, dmau->uap);
list_del(node);
kfree(dmau);
}
@@ -334,18 +345,19 @@
device_initcall(pl011_dma_initcall);
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
{
struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL);
if (dmau) {
dmau->uap = uap;
+ dmau->dev = dev;
list_add_tail(&dmau->node, &pl011_dma_uarts);
}
}
#else
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
{
- pl011_dma_probe_initcall(uap);
+ pl011_dma_probe_initcall(dev, uap);
}
#endif
@@ -979,7 +991,7 @@
#else
/* Blank functions if the DMA engine is not available */
-static inline void pl011_dma_probe(struct uart_amba_port *uap)
+static inline void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
{
}
@@ -2020,7 +2032,7 @@
uap->port.ops = &amba_pl011_pops;
uap->port.flags = UPF_BOOT_AUTOCONF;
uap->port.line = i;
- pl011_dma_probe(uap);
+ pl011_dma_probe(&dev->dev, uap);
/* Ensure interrupts from this UART are masked and cleared */
writew(0, uap->port.membase + UART011_IMSC);
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 797f9d5..65d4e55 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -67,7 +67,6 @@
{
struct usb_port *port_dev = to_usb_port(dev);
- dev_pm_qos_hide_flags(dev);
kfree(port_dev);
}
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 94ad0f7..7f67099 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -1400,7 +1400,7 @@
fbmode->vmode = 0;
if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
- if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+ if (vm->dmt_flags & VESA_DMT_VSYNC_HIGH)
fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
fbmode->vmode |= FB_VMODE_INTERLACED;
diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index c904f42..a0c9396 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -35,7 +35,7 @@
#include <linux/slab.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-data.h>
struct panel_config {
struct omap_video_timings timings;
diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
index dd12947..9c6b5fa 100644
--- a/drivers/video/omap2/displays/panel-n8x0.c
+++ b/drivers/video/omap2/displays/panel-n8x0.c
@@ -9,7 +9,7 @@
#include <linux/fb.h>
#include <video/omapdss.h>
-#include <video/omap-panel-n8x0.h>
+#include <video/omap-panel-data.h>
#define BLIZZARD_REV_CODE 0x00
#define BLIZZARD_CONFIG 0x02
diff --git a/drivers/video/omap2/displays/panel-picodlp.c b/drivers/video/omap2/displays/panel-picodlp.c
index 1b94018..974ac29 100644
--- a/drivers/video/omap2/displays/panel-picodlp.c
+++ b/drivers/video/omap2/displays/panel-picodlp.c
@@ -31,7 +31,7 @@
#include <linux/gpio.h>
#include <video/omapdss.h>
-#include <video/omap-panel-picodlp.h>
+#include <video/omap-panel-data.h>
#include "panel-picodlp.h"
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index a32407a..031d406 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -33,7 +33,7 @@
#include <linux/mutex.h>
#include <video/omapdss.h>
-#include <video/omap-panel-nokia-dsi.h>
+#include <video/omap-panel-data.h>
#include <video/mipi_display.h>
/* DSI Virtual channel. Hardcoded for now. */
diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
index 8281baa..a1dba868 100644
--- a/drivers/video/omap2/displays/panel-tfp410.c
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -24,7 +24,7 @@
#include <linux/gpio.h>
#include <drm/drm_edid.h>
-#include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-data.h>
static const struct omap_video_timings tfp410_default_timings = {
.x_res = 640,
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 63203ac..0264704 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -858,6 +858,7 @@
tmp = ((mode->xres & 7) << 24) | ((display_h_total & 7) << 16)
| ((mode->hsync_len & 7) << 8) | (hsync_pos & 7);
lcdc_write_chan(ch, LDHAJR, tmp);
+ lcdc_write_chan_mirror(ch, LDHAJR, tmp);
}
static void sh_mobile_lcdc_overlay_setup(struct sh_mobile_lcdc_overlay *ovl)
diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c
index b75db01..d428445 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/uvesafb.c
@@ -1973,7 +1973,8 @@
err = -ENOMEM;
if (err) {
- platform_device_put(uvesafb_device);
+ if (uvesafb_device)
+ platform_device_put(uvesafb_device);
platform_driver_unregister(&uvesafb_driver);
cn_del_callback(&uvesafb_cn_id);
return err;
diff --git a/firmware/Makefile b/firmware/Makefile
index 5d8ee13..cbb09ce 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -82,7 +82,7 @@
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
qlogic/12160.bin
fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
-fw-shipped-$(CONFIG_INFINIBAND_QIB) += intel/sd7220.fw
+fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
ess/maestro3_assp_minisrc.fw
diff --git a/firmware/intel/sd7220.fw.ihex b/firmware/qlogic/sd7220.fw.ihex
similarity index 100%
rename from firmware/intel/sd7220.fw.ihex
rename to firmware/qlogic/sd7220.fw.ihex
diff --git a/fs/block_dev.c b/fs/block_dev.c
index aea605c..aae187a 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -551,6 +551,7 @@
ihold(bdev->bd_inode);
return bdev;
}
+EXPORT_SYMBOL(bdgrab);
long nr_blockdev_pages(void)
{
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 56efcaa..9c6d06d 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2999,20 +2999,23 @@
if (split_flag & EXT4_EXT_DATA_VALID1) {
err = ext4_ext_zeroout(inode, ex2);
zero_ex.ee_block = ex2->ee_block;
- zero_ex.ee_len = ext4_ext_get_actual_len(ex2);
+ zero_ex.ee_len = cpu_to_le16(
+ ext4_ext_get_actual_len(ex2));
ext4_ext_store_pblock(&zero_ex,
ext4_ext_pblock(ex2));
} else {
err = ext4_ext_zeroout(inode, ex);
zero_ex.ee_block = ex->ee_block;
- zero_ex.ee_len = ext4_ext_get_actual_len(ex);
+ zero_ex.ee_len = cpu_to_le16(
+ ext4_ext_get_actual_len(ex));
ext4_ext_store_pblock(&zero_ex,
ext4_ext_pblock(ex));
}
} else {
err = ext4_ext_zeroout(inode, &orig_ex);
zero_ex.ee_block = orig_ex.ee_block;
- zero_ex.ee_len = ext4_ext_get_actual_len(&orig_ex);
+ zero_ex.ee_len = cpu_to_le16(
+ ext4_ext_get_actual_len(&orig_ex));
ext4_ext_store_pblock(&zero_ex,
ext4_ext_pblock(&orig_ex));
}
@@ -3272,7 +3275,7 @@
if (err)
goto out;
zero_ex.ee_block = ex->ee_block;
- zero_ex.ee_len = ext4_ext_get_actual_len(ex);
+ zero_ex.ee_len = cpu_to_le16(ext4_ext_get_actual_len(ex));
ext4_ext_store_pblock(&zero_ex, ext4_ext_pblock(ex));
err = ext4_ext_get_access(handle, inode, path + depth);
diff --git a/fs/ext4/indirect.c b/fs/ext4/indirect.c
index b505a14..a041831 100644
--- a/fs/ext4/indirect.c
+++ b/fs/ext4/indirect.c
@@ -1539,9 +1539,9 @@
blk = *i_data;
if (level > 0) {
ext4_lblk_t first2;
- bh = sb_bread(inode->i_sb, blk);
+ bh = sb_bread(inode->i_sb, le32_to_cpu(blk));
if (!bh) {
- EXT4_ERROR_INODE_BLOCK(inode, blk,
+ EXT4_ERROR_INODE_BLOCK(inode, le32_to_cpu(blk),
"Read failure");
return -EIO;
}
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 019f45e..d79c2da 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -923,8 +923,11 @@
cmd = F_SETLK;
fl->fl_type = F_UNLCK;
}
- if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags)))
+ if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) {
+ if (fl->fl_type == F_UNLCK)
+ posix_lock_file_wait(file, fl);
return -EIO;
+ }
if (IS_GETLK(cmd))
return dlm_posix_get(ls->ls_dlm, ip->i_no_addr, file, fl);
else if (fl->fl_type == F_UNLCK)
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 156e42e..5c29216 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -588,6 +588,7 @@
struct dlm_lksb ls_control_lksb; /* control_lock */
char ls_control_lvb[GDLM_LVB_SIZE]; /* control_lock lvb */
struct completion ls_sync_wait; /* {control,mounted}_{lock,unlock} */
+ char *ls_lvb_bits;
spinlock_t ls_recover_spin; /* protects following fields */
unsigned long ls_recover_flags; /* DFL_ */
diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c
index 9802de0..c8423d6 100644
--- a/fs/gfs2/lock_dlm.c
+++ b/fs/gfs2/lock_dlm.c
@@ -483,12 +483,8 @@
static int all_jid_bits_clear(char *lvb)
{
- int i;
- for (i = JID_BITMAP_OFFSET; i < GDLM_LVB_SIZE; i++) {
- if (lvb[i])
- return 0;
- }
- return 1;
+ return !memchr_inv(lvb + JID_BITMAP_OFFSET, 0,
+ GDLM_LVB_SIZE - JID_BITMAP_OFFSET);
}
static void sync_wait_cb(void *arg)
@@ -580,7 +576,6 @@
{
struct gfs2_sbd *sdp = container_of(work, struct gfs2_sbd, sd_control_work.work);
struct lm_lockstruct *ls = &sdp->sd_lockstruct;
- char lvb_bits[GDLM_LVB_SIZE];
uint32_t block_gen, start_gen, lvb_gen, flags;
int recover_set = 0;
int write_lvb = 0;
@@ -634,7 +629,7 @@
return;
}
- control_lvb_read(ls, &lvb_gen, lvb_bits);
+ control_lvb_read(ls, &lvb_gen, ls->ls_lvb_bits);
spin_lock(&ls->ls_recover_spin);
if (block_gen != ls->ls_recover_block ||
@@ -664,10 +659,10 @@
ls->ls_recover_result[i] = 0;
- if (!test_bit_le(i, lvb_bits + JID_BITMAP_OFFSET))
+ if (!test_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET))
continue;
- __clear_bit_le(i, lvb_bits + JID_BITMAP_OFFSET);
+ __clear_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET);
write_lvb = 1;
}
}
@@ -691,7 +686,7 @@
continue;
if (ls->ls_recover_submit[i] < start_gen) {
ls->ls_recover_submit[i] = 0;
- __set_bit_le(i, lvb_bits + JID_BITMAP_OFFSET);
+ __set_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET);
}
}
/* even if there are no bits to set, we need to write the
@@ -705,7 +700,7 @@
spin_unlock(&ls->ls_recover_spin);
if (write_lvb) {
- control_lvb_write(ls, start_gen, lvb_bits);
+ control_lvb_write(ls, start_gen, ls->ls_lvb_bits);
flags = DLM_LKF_CONVERT | DLM_LKF_VALBLK;
} else {
flags = DLM_LKF_CONVERT;
@@ -725,7 +720,7 @@
*/
for (i = 0; i < recover_size; i++) {
- if (test_bit_le(i, lvb_bits + JID_BITMAP_OFFSET)) {
+ if (test_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET)) {
fs_info(sdp, "recover generation %u jid %d\n",
start_gen, i);
gfs2_recover_set(sdp, i);
@@ -758,7 +753,6 @@
static int control_mount(struct gfs2_sbd *sdp)
{
struct lm_lockstruct *ls = &sdp->sd_lockstruct;
- char lvb_bits[GDLM_LVB_SIZE];
uint32_t start_gen, block_gen, mount_gen, lvb_gen;
int mounted_mode;
int retries = 0;
@@ -857,7 +851,7 @@
* lvb_gen will be non-zero.
*/
- control_lvb_read(ls, &lvb_gen, lvb_bits);
+ control_lvb_read(ls, &lvb_gen, ls->ls_lvb_bits);
if (lvb_gen == 0xFFFFFFFF) {
/* special value to force mount attempts to fail */
@@ -887,7 +881,7 @@
* and all lvb bits to be clear (no pending journal recoveries.)
*/
- if (!all_jid_bits_clear(lvb_bits)) {
+ if (!all_jid_bits_clear(ls->ls_lvb_bits)) {
/* journals need recovery, wait until all are clear */
fs_info(sdp, "control_mount wait for journal recovery\n");
goto restart;
@@ -949,7 +943,6 @@
static int control_first_done(struct gfs2_sbd *sdp)
{
struct lm_lockstruct *ls = &sdp->sd_lockstruct;
- char lvb_bits[GDLM_LVB_SIZE];
uint32_t start_gen, block_gen;
int error;
@@ -991,8 +984,8 @@
memset(ls->ls_recover_result, 0, ls->ls_recover_size*sizeof(uint32_t));
spin_unlock(&ls->ls_recover_spin);
- memset(lvb_bits, 0, sizeof(lvb_bits));
- control_lvb_write(ls, start_gen, lvb_bits);
+ memset(ls->ls_lvb_bits, 0, GDLM_LVB_SIZE);
+ control_lvb_write(ls, start_gen, ls->ls_lvb_bits);
error = mounted_lock(sdp, DLM_LOCK_PR, DLM_LKF_CONVERT);
if (error)
@@ -1022,6 +1015,12 @@
uint32_t old_size, new_size;
int i, max_jid;
+ if (!ls->ls_lvb_bits) {
+ ls->ls_lvb_bits = kzalloc(GDLM_LVB_SIZE, GFP_NOFS);
+ if (!ls->ls_lvb_bits)
+ return -ENOMEM;
+ }
+
max_jid = 0;
for (i = 0; i < num_slots; i++) {
if (max_jid < slots[i].slot - 1)
@@ -1057,6 +1056,7 @@
static void free_recover_size(struct lm_lockstruct *ls)
{
+ kfree(ls->ls_lvb_bits);
kfree(ls->ls_recover_submit);
kfree(ls->ls_recover_result);
ls->ls_recover_submit = NULL;
@@ -1205,6 +1205,7 @@
ls->ls_recover_size = 0;
ls->ls_recover_submit = NULL;
ls->ls_recover_result = NULL;
+ ls->ls_lvb_bits = NULL;
error = set_recover_size(sdp, NULL, 0);
if (error)
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index d1f51fd..5a51265 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -576,7 +576,7 @@
RB_CLEAR_NODE(&ip->i_res->rs_node);
out:
up_write(&ip->i_rw_mutex);
- return 0;
+ return error;
}
static void dump_rs(struct seq_file *seq, const struct gfs2_blkreserv *rs)
@@ -1181,12 +1181,9 @@
const struct gfs2_bitmap *bi, unsigned minlen, u64 *ptrimmed)
{
struct super_block *sb = sdp->sd_vfs;
- struct block_device *bdev = sb->s_bdev;
- const unsigned int sects_per_blk = sdp->sd_sb.sb_bsize /
- bdev_logical_block_size(sb->s_bdev);
u64 blk;
sector_t start = 0;
- sector_t nr_sects = 0;
+ sector_t nr_blks = 0;
int rv;
unsigned int x;
u32 trimmed = 0;
@@ -1206,35 +1203,34 @@
if (diff == 0)
continue;
blk = offset + ((bi->bi_start + x) * GFS2_NBBY);
- blk *= sects_per_blk; /* convert to sectors */
while(diff) {
if (diff & 1) {
- if (nr_sects == 0)
+ if (nr_blks == 0)
goto start_new_extent;
- if ((start + nr_sects) != blk) {
- if (nr_sects >= minlen) {
- rv = blkdev_issue_discard(bdev,
- start, nr_sects,
+ if ((start + nr_blks) != blk) {
+ if (nr_blks >= minlen) {
+ rv = sb_issue_discard(sb,
+ start, nr_blks,
GFP_NOFS, 0);
if (rv)
goto fail;
- trimmed += nr_sects;
+ trimmed += nr_blks;
}
- nr_sects = 0;
+ nr_blks = 0;
start_new_extent:
start = blk;
}
- nr_sects += sects_per_blk;
+ nr_blks++;
}
diff >>= 2;
- blk += sects_per_blk;
+ blk++;
}
}
- if (nr_sects >= minlen) {
- rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, 0);
+ if (nr_blks >= minlen) {
+ rv = sb_issue_discard(sb, start, nr_blks, GFP_NOFS, 0);
if (rv)
goto fail;
- trimmed += nr_sects;
+ trimmed += nr_blks;
}
if (ptrimmed)
*ptrimmed = trimmed;
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 0116886..a272007 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -264,7 +264,7 @@
iattr->ia_valid |= ATTR_SIZE;
}
if (bmval[0] & FATTR4_WORD0_ACL) {
- int nace;
+ u32 nace;
struct nfs4_ace *ace;
READ_BUF(4); len += 4;
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index c196369..4cce1d9 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -187,8 +187,8 @@
if (dbuf->count == ARRAY_SIZE(dbuf->dentries))
return -ENOSPC;
- if (name[0] == '.' && (name[1] == '\0' ||
- (name[1] == '.' && name[2] == '\0')))
+ if (name[0] == '.' && (namelen < 2 ||
+ (namelen == 2 && name[1] == '.')))
return 0;
dentry = lookup_one_len(name, dbuf->xadir, namelen);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index ac838b8..f21acf0 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1568,6 +1568,12 @@
c->remounting_rw = 1;
c->ro_mount = 0;
+ if (c->space_fixup) {
+ err = ubifs_fixup_free_space(c);
+ if (err)
+ return err;
+ }
+
err = check_free_space(c);
if (err)
goto out;
@@ -1684,12 +1690,6 @@
err = dbg_check_space_info(c);
}
- if (c->space_fixup) {
- err = ubifs_fixup_free_space(c);
- if (err)
- goto out;
- }
-
mutex_unlock(&c->umount_mutex);
return err;
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 76a87fb..377cd8c3 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -141,11 +141,11 @@
} compat_sigset_t;
struct compat_sigaction {
-#ifndef __ARCH_HAS_ODD_SIGACTION
+#ifndef __ARCH_HAS_IRIX_SIGACTION
compat_uptr_t sa_handler;
compat_ulong_t sa_flags;
#else
- compat_ulong_t sa_flags;
+ compat_uint_t sa_flags;
compat_uptr_t sa_handler;
#endif
#ifdef __ARCH_HAS_SA_RESTORER
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index e83ef39..fe8c447 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -213,7 +213,7 @@
#endif
#else /* !CONFIG_PM_DEVFREQ */
-static struct devfreq *devfreq_add_device(struct device *dev,
+static inline struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data)
@@ -221,34 +221,34 @@
return NULL;
}
-static int devfreq_remove_device(struct devfreq *devfreq)
+static inline int devfreq_remove_device(struct devfreq *devfreq)
{
return 0;
}
-static int devfreq_suspend_device(struct devfreq *devfreq)
+static inline int devfreq_suspend_device(struct devfreq *devfreq)
{
return 0;
}
-static int devfreq_resume_device(struct devfreq *devfreq)
+static inline int devfreq_resume_device(struct devfreq *devfreq)
{
return 0;
}
-static struct opp *devfreq_recommended_opp(struct device *dev,
+static inline struct opp *devfreq_recommended_opp(struct device *dev,
unsigned long *freq, u32 flags)
{
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
-static int devfreq_register_opp_notifier(struct device *dev,
+static inline int devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
}
-static int devfreq_unregister_opp_notifier(struct device *dev,
+static inline int devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index cad77fe..c139582 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -518,7 +518,7 @@
int kvm_write_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
void *data, unsigned long len);
int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
- gpa_t gpa);
+ gpa_t gpa, unsigned long len);
int kvm_clear_guest_page(struct kvm *kvm, gfn_t gfn, int offset, int len);
int kvm_clear_guest(struct kvm *kvm, gpa_t gpa, unsigned long len);
struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn);
diff --git a/include/linux/kvm_types.h b/include/linux/kvm_types.h
index fa7cc724..b0bcce0 100644
--- a/include/linux/kvm_types.h
+++ b/include/linux/kvm_types.h
@@ -71,6 +71,7 @@
u64 generation;
gpa_t gpa;
unsigned long hva;
+ unsigned long len;
struct kvm_memory_slot *memslot;
};
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b3d00fa..6151e90 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -210,9 +210,9 @@
#define NETDEV_HW_ADDR_T_SLAVE 3
#define NETDEV_HW_ADDR_T_UNICAST 4
#define NETDEV_HW_ADDR_T_MULTICAST 5
- bool synced;
bool global_use;
int refcount;
+ int synced;
struct rcu_head rcu_head;
};
@@ -895,7 +895,7 @@
*
* int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh)
* int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq,
- * struct net_device *dev)
+ * struct net_device *dev, u32 filter_mask)
*
* int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
* Called to change device carrier. Soft-devices (like dummy, team, etc)
diff --git a/include/linux/pata_arasan_cf_data.h b/include/linux/pata_arasan_cf_data.h
index a7b4fc3..3cc21c9 100644
--- a/include/linux/pata_arasan_cf_data.h
+++ b/include/linux/pata_arasan_cf_data.h
@@ -37,8 +37,6 @@
#define CF_BROKEN_PIO (1)
#define CF_BROKEN_MWDMA (1 << 1)
#define CF_BROKEN_UDMA (1 << 2)
- /* This is platform specific data for the DMA controller */
- void *dma_priv;
};
static inline void
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 2461033a..710067f 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -916,6 +916,7 @@
void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size);
void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size);
+void __iomem __must_check *pci_platform_rom(struct pci_dev *pdev, size_t *size);
/* Power management related routines */
int pci_save_state(struct pci_dev *dev);
diff --git a/include/linux/signal.h b/include/linux/signal.h
index a2dcb94..9475c5c 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -250,11 +250,11 @@
extern int sigsuspend(sigset_t *);
struct sigaction {
-#ifndef __ARCH_HAS_ODD_SIGACTION
+#ifndef __ARCH_HAS_IRIX_SIGACTION
__sighandler_t sa_handler;
unsigned long sa_flags;
#else
- unsigned long sa_flags;
+ unsigned int sa_flags;
__sighandler_t sa_handler;
#endif
#ifdef __ARCH_HAS_SA_RESTORER
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 441f5bf..b8292d8 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2643,6 +2643,13 @@
#endif
}
+static inline void nf_reset_trace(struct sk_buff *skb)
+{
+#if IS_ENABLED(CONFIG_NETFILTER_XT_TARGET_TRACE)
+ skb->nf_trace = 0;
+#endif
+}
+
/* Note: This doesn't put any conntrack and bridge info in dst. */
static inline void __nf_copy(struct sk_buff *dst, const struct sk_buff *src)
{
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 399162b..e1379b4 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -1074,7 +1074,8 @@
/*
* DISCOVERY LAYER
*****************************/
-int fc_disc_init(struct fc_lport *);
+void fc_disc_init(struct fc_lport *);
+void fc_disc_config(struct fc_lport *, void *);
static inline struct fc_lport *fc_disc_lport(struct fc_disc *disc)
{
diff --git a/include/sound/max98090.h b/include/sound/max98090.h
old mode 100755
new mode 100644
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index e1ef63d..44a30b1 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -488,6 +488,7 @@
/* status */
u32 connect:1; /* source and sink widgets are connected */
u32 walked:1; /* path has been walked */
+ u32 walking:1; /* path is in the process of being walked */
u32 weak:1; /* path ignored for power management */
int (*connected)(struct snd_soc_dapm_widget *source,
diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
new file mode 100644
index 0000000..6b55839
--- /dev/null
+++ b/include/video/omap-panel-data.h
@@ -0,0 +1,152 @@
+/*
+ * Header containing platform_data structs for omap panels
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ * Archit Taneja <archit@ti.com>
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Mayuresh Janorkar <mayur@ti.com>
+ *
+ * Copyright (C) 2010 Canonical Ltd.
+ * Author: Bryan Wu <bryan.wu@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP_PANEL_DATA_H
+#define __OMAP_PANEL_DATA_H
+
+struct omap_dss_device;
+
+/**
+ * struct panel_generic_dpi_data - panel driver configuration data
+ * @name: panel name
+ * @platform_enable: platform specific panel enable function
+ * @platform_disable: platform specific panel disable function
+ * @num_gpios: number of gpios connected to panel
+ * @gpios: gpio numbers on the platform
+ * @gpio_invert: configure gpio as active high or low
+ */
+struct panel_generic_dpi_data {
+ const char *name;
+ int (*platform_enable)(struct omap_dss_device *dssdev);
+ void (*platform_disable)(struct omap_dss_device *dssdev);
+
+ int num_gpios;
+ int gpios[10];
+ bool gpio_invert[10];
+};
+
+/**
+ * struct panel_n8x0_data - N800 panel driver configuration data
+ */
+struct panel_n8x0_data {
+ int (*platform_enable)(struct omap_dss_device *dssdev);
+ void (*platform_disable)(struct omap_dss_device *dssdev);
+ int panel_reset;
+ int ctrl_pwrdown;
+
+ int (*set_backlight)(struct omap_dss_device *dssdev, int level);
+};
+
+/**
+ * struct nokia_dsi_panel_data - Nokia DSI panel driver configuration data
+ * @name: panel name
+ * @use_ext_te: use external TE
+ * @ext_te_gpio: external TE GPIO
+ * @esd_interval: interval of ESD checks, 0 = disabled (ms)
+ * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms)
+ * @use_dsi_backlight: true if panel uses DSI command to control backlight
+ * @pin_config: DSI pin configuration
+ */
+
+struct nokia_dsi_panel_data {
+ const char *name;
+
+ int reset_gpio;
+
+ bool use_ext_te;
+ int ext_te_gpio;
+
+ unsigned esd_interval;
+ unsigned ulps_timeout;
+
+ bool use_dsi_backlight;
+
+ struct omap_dsi_pin_config pin_config;
+};
+
+/**
+ * struct picodlp_panel_data - picodlp panel driver configuration data
+ * @picodlp_adapter_id: i2c_adapter number for picodlp
+ */
+struct picodlp_panel_data {
+ int picodlp_adapter_id;
+ int emu_done_gpio;
+ int pwrgood_gpio;
+};
+
+/**
+ * struct tfp410_platform_data - tfp410 panel driver configuration data
+ * @i2c_bus_num: i2c bus id for the panel
+ * @power_down_gpio: gpio number for PD pin (or -1 if not available)
+ */
+struct tfp410_platform_data {
+ int i2c_bus_num;
+ int power_down_gpio;
+};
+
+/**
+ * sharp ls panel driver configuration data
+ * @resb_gpio: reset signal
+ * @ini_gpio: power on control
+ * @mo_gpio: selection for resolution(VGA/QVGA)
+ * @lr_gpio: selection for horizontal scanning direction
+ * @ud_gpio: selection for vertical scanning direction
+ */
+struct panel_sharp_ls037v7dw01_data {
+ int resb_gpio;
+ int ini_gpio;
+ int mo_gpio;
+ int lr_gpio;
+ int ud_gpio;
+};
+
+/**
+ * acx565akm panel driver configuration data
+ * @reset_gpio: reset signal
+ */
+struct panel_acx565akm_data {
+ int reset_gpio;
+};
+
+/**
+ * nec nl8048 panel driver configuration data
+ * @res_gpio: reset signal
+ * @qvga_gpio: selection for resolution(QVGA/WVGA)
+ */
+struct panel_nec_nl8048_data {
+ int res_gpio;
+ int qvga_gpio;
+};
+
+/**
+ * tpo td043 panel driver configuration data
+ * @nreset_gpio: reset signal
+ */
+struct panel_tpo_td043_data {
+ int nreset_gpio;
+};
+
+#endif /* __OMAP_PANEL_DATA_H */
diff --git a/include/video/omap-panel-generic-dpi.h b/include/video/omap-panel-generic-dpi.h
deleted file mode 100644
index 127e3f2..0000000
--- a/include/video/omap-panel-generic-dpi.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Header for generic DPI panel driver
- *
- * Copyright (C) 2010 Canonical Ltd.
- * Author: Bryan Wu <bryan.wu@canonical.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __OMAP_PANEL_GENERIC_DPI_H
-#define __OMAP_PANEL_GENERIC_DPI_H
-
-struct omap_dss_device;
-
-/**
- * struct panel_generic_dpi_data - panel driver configuration data
- * @name: panel name
- * @platform_enable: platform specific panel enable function
- * @platform_disable: platform specific panel disable function
- */
-struct panel_generic_dpi_data {
- const char *name;
- int (*platform_enable)(struct omap_dss_device *dssdev);
- void (*platform_disable)(struct omap_dss_device *dssdev);
-};
-
-#endif /* __OMAP_PANEL_GENERIC_DPI_H */
diff --git a/include/video/omap-panel-n8x0.h b/include/video/omap-panel-n8x0.h
deleted file mode 100644
index 50a1302..0000000
--- a/include/video/omap-panel-n8x0.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __OMAP_PANEL_N8X0_H
-#define __OMAP_PANEL_N8X0_H
-
-struct omap_dss_device;
-
-struct panel_n8x0_data {
- int (*platform_enable)(struct omap_dss_device *dssdev);
- void (*platform_disable)(struct omap_dss_device *dssdev);
- int panel_reset;
- int ctrl_pwrdown;
-
- int (*set_backlight)(struct omap_dss_device *dssdev, int level);
-};
-
-#endif
diff --git a/include/video/omap-panel-nokia-dsi.h b/include/video/omap-panel-nokia-dsi.h
deleted file mode 100644
index 04219a2..0000000
--- a/include/video/omap-panel-nokia-dsi.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __OMAP_NOKIA_DSI_PANEL_H
-#define __OMAP_NOKIA_DSI_PANEL_H
-
-struct omap_dss_device;
-
-/**
- * struct nokia_dsi_panel_data - Nokia DSI panel driver configuration
- * @name: panel name
- * @use_ext_te: use external TE
- * @ext_te_gpio: external TE GPIO
- * @esd_interval: interval of ESD checks, 0 = disabled (ms)
- * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms)
- * @use_dsi_backlight: true if panel uses DSI command to control backlight
- * @pin_config: DSI pin configuration
- */
-struct nokia_dsi_panel_data {
- const char *name;
-
- int reset_gpio;
-
- bool use_ext_te;
- int ext_te_gpio;
-
- unsigned esd_interval;
- unsigned ulps_timeout;
-
- bool use_dsi_backlight;
-
- struct omap_dsi_pin_config pin_config;
-};
-
-#endif /* __OMAP_NOKIA_DSI_PANEL_H */
diff --git a/include/video/omap-panel-picodlp.h b/include/video/omap-panel-picodlp.h
deleted file mode 100644
index 1c342ef..0000000
--- a/include/video/omap-panel-picodlp.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * panel data for picodlp panel
- *
- * Copyright (C) 2011 Texas Instruments
- *
- * Author: Mayuresh Janorkar <mayur@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __PANEL_PICODLP_H
-#define __PANEL_PICODLP_H
-/**
- * struct : picodlp panel data
- * picodlp_adapter_id: i2c_adapter number for picodlp
- */
-struct picodlp_panel_data {
- int picodlp_adapter_id;
- int emu_done_gpio;
- int pwrgood_gpio;
-};
-#endif /* __PANEL_PICODLP_H */
diff --git a/include/video/omap-panel-tfp410.h b/include/video/omap-panel-tfp410.h
deleted file mode 100644
index aef35e4..0000000
--- a/include/video/omap-panel-tfp410.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Header for TFP410 chip driver
- *
- * Copyright (C) 2011 Texas Instruments Inc
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __OMAP_PANEL_TFP410_H
-#define __OMAP_PANEL_TFP410_H
-
-struct omap_dss_device;
-
-/**
- * struct tfp410_platform_data - panel driver configuration data
- * @i2c_bus_num: i2c bus id for the panel
- * @power_down_gpio: gpio number for PD pin (or -1 if not available)
- */
-struct tfp410_platform_data {
- int i2c_bus_num;
- int power_down_gpio;
-};
-
-#endif /* __OMAP_PANEL_TFP410_H */
diff --git a/ipc/msg.c b/ipc/msg.c
index 31cd1bf..fede1d0 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -872,6 +872,7 @@
goto out_unlock;
break;
}
+ msg = ERR_PTR(-EAGAIN);
} else
break;
msg_counter++;
diff --git a/mm/mmap.c b/mm/mmap.c
index 6466699..0db0de1 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1940,7 +1940,7 @@
/* Check the cache first. */
/* (Cache hit rate is typically around 35%.) */
- vma = mm->mmap_cache;
+ vma = ACCESS_ONCE(mm->mmap_cache);
if (!(vma && vma->vm_end > addr && vma->vm_start <= addr)) {
struct rb_node *rb_node;
diff --git a/mm/nommu.c b/mm/nommu.c
index e193280..2f3ea74 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -821,7 +821,7 @@
struct vm_area_struct *vma;
/* check the cache first */
- vma = mm->mmap_cache;
+ vma = ACCESS_ONCE(mm->mmap_cache);
if (vma && vma->vm_start <= addr && vma->vm_end > addr)
return vma;
diff --git a/net/core/dev.c b/net/core/dev.c
index b13e5c7..e7d68ed 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1624,7 +1624,6 @@
}
skb_orphan(skb);
- nf_reset(skb);
if (unlikely(!is_skb_forwardable(dev, skb))) {
atomic_long_inc(&dev->rx_dropped);
@@ -1640,6 +1639,7 @@
skb->mark = 0;
secpath_reset(skb);
nf_reset(skb);
+ nf_reset_trace(skb);
return netif_rx(skb);
}
EXPORT_SYMBOL_GPL(dev_forward_skb);
@@ -3314,6 +3314,7 @@
if (dev->rx_handler)
return -EBUSY;
+ /* Note: rx_handler_data must be set before rx_handler */
rcu_assign_pointer(dev->rx_handler_data, rx_handler_data);
rcu_assign_pointer(dev->rx_handler, rx_handler);
@@ -3334,6 +3335,11 @@
ASSERT_RTNL();
RCU_INIT_POINTER(dev->rx_handler, NULL);
+ /* a reader seeing a non NULL rx_handler in a rcu_read_lock()
+ * section has a guarantee to see a non NULL rx_handler_data
+ * as well.
+ */
+ synchronize_net();
RCU_INIT_POINTER(dev->rx_handler_data, NULL);
}
EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister);
diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c
index bd2eb9d..abdc9e6 100644
--- a/net/core/dev_addr_lists.c
+++ b/net/core/dev_addr_lists.c
@@ -37,7 +37,7 @@
ha->type = addr_type;
ha->refcount = 1;
ha->global_use = global;
- ha->synced = false;
+ ha->synced = 0;
list_add_tail_rcu(&ha->list, &list->list);
list->count++;
@@ -165,7 +165,7 @@
addr_len, ha->type);
if (err)
break;
- ha->synced = true;
+ ha->synced++;
ha->refcount++;
} else if (ha->refcount == 1) {
__hw_addr_del(to_list, ha->addr, addr_len, ha->type);
@@ -186,7 +186,7 @@
if (ha->synced) {
__hw_addr_del(to_list, ha->addr,
addr_len, ha->type);
- ha->synced = false;
+ ha->synced--;
__hw_addr_del(from_list, ha->addr,
addr_len, ha->type);
}
diff --git a/net/core/flow.c b/net/core/flow.c
index c56ea6f..2bfd081 100644
--- a/net/core/flow.c
+++ b/net/core/flow.c
@@ -328,7 +328,7 @@
struct flow_flush_info *info = data;
struct tasklet_struct *tasklet;
- tasklet = this_cpu_ptr(&info->cache->percpu->flush_tasklet);
+ tasklet = &this_cpu_ptr(info->cache->percpu)->flush_tasklet;
tasklet->data = (unsigned long)info;
tasklet_schedule(tasklet);
}
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 5fb8d7e..b65441d 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -496,8 +496,10 @@
}
if (ops->fill_info) {
data = nla_nest_start(skb, IFLA_INFO_DATA);
- if (data == NULL)
+ if (data == NULL) {
+ err = -EMSGSIZE;
goto err_cancel_link;
+ }
err = ops->fill_info(skb, dev);
if (err < 0)
goto err_cancel_data;
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index f678507..96083b7 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -802,8 +802,10 @@
if (nlh->nlmsg_flags & NLM_F_EXCL ||
!(nlh->nlmsg_flags & NLM_F_REPLACE))
return -EEXIST;
-
- set_ifa_lifetime(ifa_existing, valid_lft, prefered_lft);
+ ifa = ifa_existing;
+ set_ifa_lifetime(ifa, valid_lft, prefered_lft);
+ rtmsg_ifa(RTM_NEWADDR, ifa, nlh, NETLINK_CB(skb).portid);
+ blocking_notifier_call_chain(&inetaddr_chain, NETDEV_UP, ifa);
}
return 0;
}
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 26512250..a459c4f 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -2529,6 +2529,9 @@
static void init_loopback(struct net_device *dev)
{
struct inet6_dev *idev;
+ struct net_device *sp_dev;
+ struct inet6_ifaddr *sp_ifa;
+ struct rt6_info *sp_rt;
/* ::1 */
@@ -2540,6 +2543,30 @@
}
add_addr(idev, &in6addr_loopback, 128, IFA_HOST);
+
+ /* Add routes to other interface's IPv6 addresses */
+ for_each_netdev(dev_net(dev), sp_dev) {
+ if (!strcmp(sp_dev->name, dev->name))
+ continue;
+
+ idev = __in6_dev_get(sp_dev);
+ if (!idev)
+ continue;
+
+ read_lock_bh(&idev->lock);
+ list_for_each_entry(sp_ifa, &idev->addr_list, if_list) {
+
+ if (sp_ifa->flags & (IFA_F_DADFAILED | IFA_F_TENTATIVE))
+ continue;
+
+ sp_rt = addrconf_dst_alloc(idev, &sp_ifa->addr, 0);
+
+ /* Failure cases are ignored */
+ if (!IS_ERR(sp_rt))
+ ip6_ins_rt(sp_rt);
+ }
+ read_unlock_bh(&idev->lock);
+ }
}
static void addrconf_add_linklocal(struct inet6_dev *idev, const struct in6_addr *addr)
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index e33fe0a..2bab2aa 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -118,6 +118,18 @@
ipv6_addr_loopback(&hdr->daddr))
goto err;
+ /* RFC4291 Errata ID: 3480
+ * Interface-Local scope spans only a single interface on a
+ * node and is useful only for loopback transmission of
+ * multicast. Packets with interface-local scope received
+ * from another node must be discarded.
+ */
+ if (!(skb->pkt_type == PACKET_LOOPBACK ||
+ dev->flags & IFF_LOOPBACK) &&
+ ipv6_addr_is_multicast(&hdr->daddr) &&
+ IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 1)
+ goto err;
+
/* RFC4291 2.7
* Nodes must not originate a packet to a multicast address whose scope
* field contains the reserved value 0; if such a packet is received, it
diff --git a/net/ipv6/netfilter/ip6t_NPT.c b/net/ipv6/netfilter/ip6t_NPT.c
index 33608c6..cb63114 100644
--- a/net/ipv6/netfilter/ip6t_NPT.c
+++ b/net/ipv6/netfilter/ip6t_NPT.c
@@ -57,7 +57,7 @@
if (pfx_len - i >= 32)
mask = 0;
else
- mask = htonl(~((1 << (pfx_len - i)) - 1));
+ mask = htonl((1 << (i - pfx_len + 32)) - 1);
idx = i / 32;
addr->s6_addr32[idx] &= mask;
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 8555f33..5b1e5af 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -2693,6 +2693,7 @@
hdr->sadb_msg_pid = c->portid;
hdr->sadb_msg_version = PF_KEY_V2;
hdr->sadb_msg_errno = (uint8_t) 0;
+ hdr->sadb_msg_satype = SADB_SATYPE_UNSPEC;
hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t));
pfkey_broadcast(skb_out, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net);
return 0;
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index fb30681..a689360 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2582,7 +2582,7 @@
list_del(&dep->list);
mutex_unlock(&local->mtx);
- ieee80211_roc_notify_destroy(dep);
+ ieee80211_roc_notify_destroy(dep, true);
return 0;
}
@@ -2622,7 +2622,7 @@
ieee80211_start_next_roc(local);
mutex_unlock(&local->mtx);
- ieee80211_roc_notify_destroy(found);
+ ieee80211_roc_notify_destroy(found, true);
} else {
/* work may be pending so use it all the time */
found->abort = true;
@@ -2632,6 +2632,8 @@
/* work will clean up etc */
flush_delayed_work(&found->work);
+ WARN_ON(!found->to_be_freed);
+ kfree(found);
}
return 0;
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index 78c0d90..931be41 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -63,6 +63,7 @@
enum ieee80211_chanctx_mode mode)
{
struct ieee80211_chanctx *ctx;
+ u32 changed;
int err;
lockdep_assert_held(&local->chanctx_mtx);
@@ -76,6 +77,13 @@
ctx->conf.rx_chains_dynamic = 1;
ctx->mode = mode;
+ /* acquire mutex to prevent idle from changing */
+ mutex_lock(&local->mtx);
+ /* turn idle off *before* setting channel -- some drivers need that */
+ changed = ieee80211_idle_off(local);
+ if (changed)
+ ieee80211_hw_config(local, changed);
+
if (!local->use_chanctx) {
local->_oper_channel_type =
cfg80211_get_chandef_type(chandef);
@@ -85,14 +93,17 @@
err = drv_add_chanctx(local, ctx);
if (err) {
kfree(ctx);
- return ERR_PTR(err);
+ ctx = ERR_PTR(err);
+
+ ieee80211_recalc_idle(local);
+ goto out;
}
}
+ /* and keep the mutex held until the new chanctx is on the list */
list_add_rcu(&ctx->list, &local->chanctx_list);
- mutex_lock(&local->mtx);
- ieee80211_recalc_idle(local);
+ out:
mutex_unlock(&local->mtx);
return ctx;
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 388580a..5672533 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -309,6 +309,7 @@
struct ieee80211_channel *chan;
bool started, abort, hw_begun, notified;
+ bool to_be_freed;
unsigned long hw_start_time;
@@ -1347,7 +1348,7 @@
void ieee80211_roc_setup(struct ieee80211_local *local);
void ieee80211_start_next_roc(struct ieee80211_local *local);
void ieee80211_roc_purge(struct ieee80211_sub_if_data *sdata);
-void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc);
+void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc, bool free);
void ieee80211_sw_roc_work(struct work_struct *work);
void ieee80211_handle_roc_started(struct ieee80211_roc_work *roc);
@@ -1361,6 +1362,7 @@
enum nl80211_iftype type);
void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata);
void ieee80211_remove_interfaces(struct ieee80211_local *local);
+u32 ieee80211_idle_off(struct ieee80211_local *local);
void ieee80211_recalc_idle(struct ieee80211_local *local);
void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
const int offset);
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index baaa860..58150f877 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -78,7 +78,7 @@
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_TXPOWER);
}
-static u32 ieee80211_idle_off(struct ieee80211_local *local)
+u32 ieee80211_idle_off(struct ieee80211_local *local)
{
if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
return 0;
@@ -349,21 +349,19 @@
static int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
- int ret = 0;
+ int ret;
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return 0;
- mutex_lock(&local->iflist_mtx);
+ ASSERT_RTNL();
if (local->monitor_sdata)
- goto out_unlock;
+ return 0;
sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL);
- if (!sdata) {
- ret = -ENOMEM;
- goto out_unlock;
- }
+ if (!sdata)
+ return -ENOMEM;
/* set up data */
sdata->local = local;
@@ -377,13 +375,13 @@
if (WARN_ON(ret)) {
/* ok .. stupid driver, it asked for this! */
kfree(sdata);
- goto out_unlock;
+ return ret;
}
ret = ieee80211_check_queues(sdata);
if (ret) {
kfree(sdata);
- goto out_unlock;
+ return ret;
}
ret = ieee80211_vif_use_channel(sdata, &local->monitor_chandef,
@@ -391,13 +389,14 @@
if (ret) {
drv_remove_interface(local, sdata);
kfree(sdata);
- goto out_unlock;
+ return ret;
}
+ mutex_lock(&local->iflist_mtx);
rcu_assign_pointer(local->monitor_sdata, sdata);
- out_unlock:
mutex_unlock(&local->iflist_mtx);
- return ret;
+
+ return 0;
}
static void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
@@ -407,14 +406,20 @@
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return;
+ ASSERT_RTNL();
+
mutex_lock(&local->iflist_mtx);
sdata = rcu_dereference_protected(local->monitor_sdata,
lockdep_is_held(&local->iflist_mtx));
- if (!sdata)
- goto out_unlock;
+ if (!sdata) {
+ mutex_unlock(&local->iflist_mtx);
+ return;
+ }
rcu_assign_pointer(local->monitor_sdata, NULL);
+ mutex_unlock(&local->iflist_mtx);
+
synchronize_net();
ieee80211_vif_release_channel(sdata);
@@ -422,8 +427,6 @@
drv_remove_interface(local, sdata);
kfree(sdata);
- out_unlock:
- mutex_unlock(&local->iflist_mtx);
}
/*
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 29ce2aa..4749b38 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1060,7 +1060,8 @@
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list)
- if (ieee80211_vif_is_mesh(&sdata->vif))
+ if (ieee80211_vif_is_mesh(&sdata->vif) &&
+ ieee80211_sdata_running(sdata))
ieee80211_queue_work(&local->hw, &sdata->work);
rcu_read_unlock();
}
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 1415774..82cc303 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3608,8 +3608,10 @@
/* Restart STA timers */
rcu_read_lock();
- list_for_each_entry_rcu(sdata, &local->interfaces, list)
- ieee80211_restart_sta_timer(sdata);
+ list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+ if (ieee80211_sdata_running(sdata))
+ ieee80211_restart_sta_timer(sdata);
+ }
rcu_read_unlock();
}
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index cc79b4a..430bd25 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -297,10 +297,13 @@
}
}
-void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc)
+void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc, bool free)
{
struct ieee80211_roc_work *dep, *tmp;
+ if (WARN_ON(roc->to_be_freed))
+ return;
+
/* was never transmitted */
if (roc->frame) {
cfg80211_mgmt_tx_status(&roc->sdata->wdev,
@@ -316,9 +319,12 @@
GFP_KERNEL);
list_for_each_entry_safe(dep, tmp, &roc->dependents, list)
- ieee80211_roc_notify_destroy(dep);
+ ieee80211_roc_notify_destroy(dep, true);
- kfree(roc);
+ if (free)
+ kfree(roc);
+ else
+ roc->to_be_freed = true;
}
void ieee80211_sw_roc_work(struct work_struct *work)
@@ -331,6 +337,9 @@
mutex_lock(&local->mtx);
+ if (roc->to_be_freed)
+ goto out_unlock;
+
if (roc->abort)
goto finish;
@@ -370,7 +379,7 @@
finish:
list_del(&roc->list);
started = roc->started;
- ieee80211_roc_notify_destroy(roc);
+ ieee80211_roc_notify_destroy(roc, !roc->abort);
if (started) {
drv_flush(local, false);
@@ -410,7 +419,7 @@
list_del(&roc->list);
- ieee80211_roc_notify_destroy(roc);
+ ieee80211_roc_notify_destroy(roc, true);
/* if there's another roc, start it now */
ieee80211_start_next_roc(local);
@@ -460,12 +469,14 @@
list_for_each_entry_safe(roc, tmp, &tmp_list, list) {
if (local->ops->remain_on_channel) {
list_del(&roc->list);
- ieee80211_roc_notify_destroy(roc);
+ ieee80211_roc_notify_destroy(roc, true);
} else {
ieee80211_queue_delayed_work(&local->hw, &roc->work, 0);
/* work will clean up etc */
flush_delayed_work(&roc->work);
+ WARN_ON(!roc->to_be_freed);
+ kfree(roc);
}
}
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index bb73ed2d..c6844ad 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2675,7 +2675,19 @@
memset(nskb->cb, 0, sizeof(nskb->cb));
- ieee80211_tx_skb(rx->sdata, nskb);
+ if (rx->sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(nskb);
+
+ info->flags = IEEE80211_TX_CTL_TX_OFFCHAN |
+ IEEE80211_TX_INTFL_OFFCHAN_TX_OK |
+ IEEE80211_TX_CTL_NO_CCK_RATE;
+ if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)
+ info->hw_queue =
+ local->hw.offchannel_tx_hw_queue;
+ }
+
+ __ieee80211_tx_skb_tid_band(rx->sdata, nskb, 7,
+ status->band);
}
dev_kfree_skb(rx->skb);
return RX_QUEUED;
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index a79ce82..238a0cc 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -766,6 +766,7 @@
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
int ret, i;
+ bool have_key = false;
might_sleep();
@@ -793,12 +794,19 @@
list_del_rcu(&sta->list);
mutex_lock(&local->key_mtx);
- for (i = 0; i < NUM_DEFAULT_KEYS; i++)
+ for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
__ieee80211_key_free(key_mtx_dereference(local, sta->gtk[i]));
- if (sta->ptk)
+ have_key = true;
+ }
+ if (sta->ptk) {
__ieee80211_key_free(key_mtx_dereference(local, sta->ptk));
+ have_key = true;
+ }
mutex_unlock(&local->key_mtx);
+ if (!have_key)
+ synchronize_net();
+
sta->dead = true;
local->num_sta--;
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 6bcce40..fedee39 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -568,6 +568,7 @@
register_net_sysctl(&init_net, "net", nf_ct_netfilter_table);
if (!nf_ct_netfilter_header) {
pr_err("nf_conntrack: can't register to sysctl.\n");
+ ret = -ENOMEM;
goto out_sysctl;
}
#endif
diff --git a/net/netfilter/nfnetlink_acct.c b/net/netfilter/nfnetlink_acct.c
index 589d686..dc3fd5d 100644
--- a/net/netfilter/nfnetlink_acct.c
+++ b/net/netfilter/nfnetlink_acct.c
@@ -49,6 +49,8 @@
return -EINVAL;
acct_name = nla_data(tb[NFACCT_NAME]);
+ if (strlen(acct_name) == 0)
+ return -EINVAL;
list_for_each_entry(nfacct, &nfnl_acct_list, head) {
if (strncmp(nfacct->name, acct_name, NFACCT_NAME_MAX) != 0)
diff --git a/net/netfilter/nfnetlink_queue_core.c b/net/netfilter/nfnetlink_queue_core.c
index 1cb4854..42680b2 100644
--- a/net/netfilter/nfnetlink_queue_core.c
+++ b/net/netfilter/nfnetlink_queue_core.c
@@ -1062,8 +1062,10 @@
#ifdef CONFIG_PROC_FS
if (!proc_create("nfnetlink_queue", 0440,
- proc_net_netfilter, &nfqnl_file_ops))
+ proc_net_netfilter, &nfqnl_file_ops)) {
+ status = -ENOMEM;
goto cleanup_subsys;
+ }
#endif
register_netdevice_notifier(&nfqnl_dev_notifier);
diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c
index b530afa..ee25f25 100644
--- a/net/nfc/llcp/llcp.c
+++ b/net/nfc/llcp/llcp.c
@@ -107,8 +107,6 @@
accept_sk->sk_state_change(sk);
bh_unlock_sock(accept_sk);
-
- sock_orphan(accept_sk);
}
if (listen == true) {
@@ -134,8 +132,6 @@
bh_unlock_sock(sk);
- sock_orphan(sk);
-
sk_del_node_init(sk);
}
@@ -164,8 +160,6 @@
bh_unlock_sock(sk);
- sock_orphan(sk);
-
sk_del_node_init(sk);
}
@@ -827,7 +821,6 @@
skb_get(skb);
} else {
pr_err("Receive queue is full\n");
- kfree_skb(skb);
}
nfc_llcp_sock_put(llcp_sock);
@@ -1028,7 +1021,6 @@
skb_get(skb);
} else {
pr_err("Receive queue is full\n");
- kfree_skb(skb);
}
}
diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c
index 5c7cdf3f..8f02574 100644
--- a/net/nfc/llcp/sock.c
+++ b/net/nfc/llcp/sock.c
@@ -270,7 +270,9 @@
}
if (sk->sk_state == LLCP_CONNECTED || !newsock) {
- nfc_llcp_accept_unlink(sk);
+ list_del_init(&lsk->accept_queue);
+ sock_put(sk);
+
if (newsock)
sock_graft(sk, newsock);
@@ -464,8 +466,6 @@
nfc_llcp_accept_unlink(accept_sk);
release_sock(accept_sk);
-
- sock_orphan(accept_sk);
}
}
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 13aa47a..1bc210f 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -962,8 +962,11 @@
cbq_update(q);
if ((incr -= incr2) < 0)
incr = 0;
+ q->now += incr;
+ } else {
+ if (now > q->now)
+ q->now = now;
}
- q->now += incr;
q->now_rt = now;
for (;;) {
diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c
index 4e606fc..5578628 100644
--- a/net/sched/sch_fq_codel.c
+++ b/net/sched/sch_fq_codel.c
@@ -195,7 +195,7 @@
flow->deficit = q->quantum;
flow->dropped = 0;
}
- if (++sch->q.qlen < sch->limit)
+ if (++sch->q.qlen <= sch->limit)
return NET_XMIT_SUCCESS;
q->drop_overlimit++;
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index ffad481..eac7e0e 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -904,7 +904,7 @@
u64 mult;
int shift;
- r->rate_bps = rate << 3;
+ r->rate_bps = (u64)rate << 3;
r->shift = 0;
r->mult = 1;
/*
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 971282b..2db702d 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1412,8 +1412,8 @@
if (UNIXCB(skb).cred)
return;
if (test_bit(SOCK_PASSCRED, &sock->flags) ||
- (other->sk_socket &&
- test_bit(SOCK_PASSCRED, &other->sk_socket->flags))) {
+ !other->sk_socket ||
+ test_bit(SOCK_PASSCRED, &other->sk_socket->flags)) {
UNIXCB(skb).pid = get_pid(task_tgid(current));
UNIXCB(skb).cred = get_current_cred();
}
@@ -1993,7 +1993,7 @@
if ((UNIXCB(skb).pid != siocb->scm->pid) ||
(UNIXCB(skb).cred != siocb->scm->cred))
break;
- } else {
+ } else if (test_bit(SOCK_PASSCRED, &sock->flags)) {
/* Copy credentials */
scm_set_cred(siocb->scm, UNIXCB(skb).pid, UNIXCB(skb).cred);
check_creds = 1;
diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
index ca511c4..d8079da 100644
--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -207,7 +207,7 @@
struct vsock_sock *vsk;
list_for_each_entry(vsk, vsock_bound_sockets(addr), bound_table)
- if (vsock_addr_equals_addr_any(addr, &vsk->local_addr))
+ if (addr->svm_port == vsk->local_addr.svm_port)
return sk_vsock(vsk);
return NULL;
@@ -220,8 +220,8 @@
list_for_each_entry(vsk, vsock_connected_sockets(src, dst),
connected_table) {
- if (vsock_addr_equals_addr(src, &vsk->remote_addr)
- && vsock_addr_equals_addr(dst, &vsk->local_addr)) {
+ if (vsock_addr_equals_addr(src, &vsk->remote_addr) &&
+ dst->svm_port == vsk->local_addr.svm_port) {
return sk_vsock(vsk);
}
}
diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c
index a70ace8..1f6508e 100644
--- a/net/vmw_vsock/vmci_transport.c
+++ b/net/vmw_vsock/vmci_transport.c
@@ -464,19 +464,16 @@
struct vsock_sock *vlistener;
struct vsock_sock *vpending;
struct sock *pending;
+ struct sockaddr_vm src;
+
+ vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port);
vlistener = vsock_sk(listener);
list_for_each_entry(vpending, &vlistener->pending_links,
pending_links) {
- struct sockaddr_vm src;
- struct sockaddr_vm dst;
-
- vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port);
- vsock_addr_init(&dst, pkt->dg.dst.context, pkt->dst_port);
-
if (vsock_addr_equals_addr(&src, &vpending->remote_addr) &&
- vsock_addr_equals_addr(&dst, &vpending->local_addr)) {
+ pkt->dst_port == vpending->local_addr.svm_port) {
pending = sk_vsock(vpending);
sock_hold(pending);
goto found;
@@ -739,10 +736,15 @@
*/
bh_lock_sock(sk);
- if (!sock_owned_by_user(sk) && sk->sk_state == SS_CONNECTED)
- vmci_trans(vsk)->notify_ops->handle_notify_pkt(
- sk, pkt, true, &dst, &src,
- &bh_process_pkt);
+ if (!sock_owned_by_user(sk)) {
+ /* The local context ID may be out of date, update it. */
+ vsk->local_addr.svm_cid = dst.svm_cid;
+
+ if (sk->sk_state == SS_CONNECTED)
+ vmci_trans(vsk)->notify_ops->handle_notify_pkt(
+ sk, pkt, true, &dst, &src,
+ &bh_process_pkt);
+ }
bh_unlock_sock(sk);
@@ -902,6 +904,9 @@
lock_sock(sk);
+ /* The local context ID may be out of date. */
+ vsock_sk(sk)->local_addr.svm_cid = pkt->dg.dst.context;
+
switch (sk->sk_state) {
case SS_LISTEN:
vmci_transport_recv_listen(sk, pkt);
@@ -958,6 +963,10 @@
pending = vmci_transport_get_pending(sk, pkt);
if (pending) {
lock_sock(pending);
+
+ /* The local context ID may be out of date. */
+ vsock_sk(pending)->local_addr.svm_cid = pkt->dg.dst.context;
+
switch (pending->sk_state) {
case SS_CONNECTING:
err = vmci_transport_recv_connecting_server(sk,
diff --git a/net/vmw_vsock/vsock_addr.c b/net/vmw_vsock/vsock_addr.c
index b7df1ae..ec2611b 100644
--- a/net/vmw_vsock/vsock_addr.c
+++ b/net/vmw_vsock/vsock_addr.c
@@ -64,16 +64,6 @@
}
EXPORT_SYMBOL_GPL(vsock_addr_equals_addr);
-bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr,
- const struct sockaddr_vm *other)
-{
- return (addr->svm_cid == VMADDR_CID_ANY ||
- other->svm_cid == VMADDR_CID_ANY ||
- addr->svm_cid == other->svm_cid) &&
- addr->svm_port == other->svm_port;
-}
-EXPORT_SYMBOL_GPL(vsock_addr_equals_addr_any);
-
int vsock_addr_cast(const struct sockaddr *addr,
size_t len, struct sockaddr_vm **out_addr)
{
diff --git a/net/vmw_vsock/vsock_addr.h b/net/vmw_vsock/vsock_addr.h
index cdfbcef..9ccd531 100644
--- a/net/vmw_vsock/vsock_addr.h
+++ b/net/vmw_vsock/vsock_addr.h
@@ -24,8 +24,6 @@
void vsock_addr_unbind(struct sockaddr_vm *addr);
bool vsock_addr_equals_addr(const struct sockaddr_vm *addr,
const struct sockaddr_vm *other);
-bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr,
- const struct sockaddr_vm *other);
int vsock_addr_cast(const struct sockaddr *addr, size_t len,
struct sockaddr_vm **out_addr);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index ea4155f..6ddf74f 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -212,6 +212,39 @@
rdev_rfkill_poll(rdev);
}
+void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev)
+{
+ lockdep_assert_held(&rdev->devlist_mtx);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
+
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE))
+ return;
+
+ if (!wdev->p2p_started)
+ return;
+
+ rdev_stop_p2p_device(rdev, wdev);
+ wdev->p2p_started = false;
+
+ rdev->opencount--;
+
+ if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
+ bool busy = work_busy(&rdev->scan_done_wk);
+
+ /*
+ * If the work isn't pending or running (in which case it would
+ * be waiting for the lock we hold) the driver didn't properly
+ * cancel the scan when the interface was removed. In this case
+ * warn and leak the scan request object to not crash later.
+ */
+ WARN_ON(!busy);
+
+ rdev->scan_req->aborted = true;
+ ___cfg80211_scan_done(rdev, !busy);
+ }
+}
+
static int cfg80211_rfkill_set_block(void *data, bool blocked)
{
struct cfg80211_registered_device *rdev = data;
@@ -221,7 +254,8 @@
return 0;
rtnl_lock();
- mutex_lock(&rdev->devlist_mtx);
+
+ /* read-only iteration need not hold the devlist_mtx */
list_for_each_entry(wdev, &rdev->wdev_list, list) {
if (wdev->netdev) {
@@ -231,18 +265,18 @@
/* otherwise, check iftype */
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
- if (!wdev->p2p_started)
- break;
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
- rdev->opencount--;
+ /* but this requires it */
+ mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
+ cfg80211_stop_p2p_device(rdev, wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
+ mutex_unlock(&rdev->devlist_mtx);
break;
default:
break;
}
}
- mutex_unlock(&rdev->devlist_mtx);
rtnl_unlock();
return 0;
@@ -745,17 +779,13 @@
wdev = container_of(work, struct wireless_dev, cleanup_work);
rdev = wiphy_to_dev(wdev->wiphy);
- cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
rdev->scan_req->aborted = true;
___cfg80211_scan_done(rdev, true);
}
- cfg80211_unlock_rdev(rdev);
-
- mutex_lock(&rdev->sched_scan_mtx);
-
if (WARN_ON(rdev->sched_scan_req &&
rdev->sched_scan_req->dev == wdev->netdev)) {
__cfg80211_stop_sched_scan(rdev, false);
@@ -781,21 +811,19 @@
return;
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
list_del_rcu(&wdev->list);
rdev->devlist_generation++;
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
- if (!wdev->p2p_started)
- break;
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
- rdev->opencount--;
+ cfg80211_stop_p2p_device(rdev, wdev);
break;
default:
WARN_ON_ONCE(1);
break;
}
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
}
EXPORT_SYMBOL(cfg80211_unregister_wdev);
@@ -936,6 +964,7 @@
cfg80211_update_iface_num(rdev, wdev->iftype, 1);
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
switch (wdev->iftype) {
#ifdef CONFIG_CFG80211_WEXT
@@ -967,6 +996,7 @@
break;
}
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
rdev->opencount++;
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 3aec0e4..5845c2b 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -503,6 +503,9 @@
void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
enum nl80211_iftype iftype, int num);
+void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev);
+
#define CFG80211_MAX_NUM_DIFFERENT_CHANNELS 10
#ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index d44ab21..58e13a8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4702,14 +4702,19 @@
if (!rdev->ops->scan)
return -EOPNOTSUPP;
- if (rdev->scan_req)
- return -EBUSY;
+ mutex_lock(&rdev->sched_scan_mtx);
+ if (rdev->scan_req) {
+ err = -EBUSY;
+ goto unlock;
+ }
if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
n_channels = validate_scan_freqs(
info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
- if (!n_channels)
- return -EINVAL;
+ if (!n_channels) {
+ err = -EINVAL;
+ goto unlock;
+ }
} else {
enum ieee80211_band band;
n_channels = 0;
@@ -4723,23 +4728,29 @@
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp)
n_ssids++;
- if (n_ssids > wiphy->max_scan_ssids)
- return -EINVAL;
+ if (n_ssids > wiphy->max_scan_ssids) {
+ err = -EINVAL;
+ goto unlock;
+ }
if (info->attrs[NL80211_ATTR_IE])
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
else
ie_len = 0;
- if (ie_len > wiphy->max_scan_ie_len)
- return -EINVAL;
+ if (ie_len > wiphy->max_scan_ie_len) {
+ err = -EINVAL;
+ goto unlock;
+ }
request = kzalloc(sizeof(*request)
+ sizeof(*request->ssids) * n_ssids
+ sizeof(*request->channels) * n_channels
+ ie_len, GFP_KERNEL);
- if (!request)
- return -ENOMEM;
+ if (!request) {
+ err = -ENOMEM;
+ goto unlock;
+ }
if (n_ssids)
request->ssids = (void *)&request->channels[n_channels];
@@ -4876,6 +4887,8 @@
kfree(request);
}
+ unlock:
+ mutex_unlock(&rdev->sched_scan_mtx);
return err;
}
@@ -7749,20 +7762,9 @@
if (!rdev->ops->stop_p2p_device)
return -EOPNOTSUPP;
- if (!wdev->p2p_started)
- return 0;
-
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
-
- mutex_lock(&rdev->devlist_mtx);
- rdev->opencount--;
- mutex_unlock(&rdev->devlist_mtx);
-
- if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
- rdev->scan_req->aborted = true;
- ___cfg80211_scan_done(rdev, true);
- }
+ mutex_lock(&rdev->sched_scan_mtx);
+ cfg80211_stop_p2p_device(rdev, wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
return 0;
}
@@ -8486,7 +8488,7 @@
struct nlattr *nest;
int i;
- ASSERT_RDEV_LOCK(rdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
if (WARN_ON(!req))
return 0;
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 674aadc..fd99ea4 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -169,7 +169,7 @@
union iwreq_data wrqu;
#endif
- ASSERT_RDEV_LOCK(rdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
request = rdev->scan_req;
@@ -230,9 +230,9 @@
rdev = container_of(wk, struct cfg80211_registered_device,
scan_done_wk);
- cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
___cfg80211_scan_done(rdev, false);
- cfg80211_unlock_rdev(rdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
}
void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
@@ -698,11 +698,6 @@
found = rb_find_bss(dev, tmp, BSS_CMP_REGULAR);
if (found) {
- found->pub.beacon_interval = tmp->pub.beacon_interval;
- found->pub.signal = tmp->pub.signal;
- found->pub.capability = tmp->pub.capability;
- found->ts = tmp->ts;
-
/* Update IEs */
if (rcu_access_pointer(tmp->pub.proberesp_ies)) {
const struct cfg80211_bss_ies *old;
@@ -723,6 +718,8 @@
if (found->pub.hidden_beacon_bss &&
!list_empty(&found->hidden_list)) {
+ const struct cfg80211_bss_ies *f;
+
/*
* The found BSS struct is one of the probe
* response members of a group, but we're
@@ -732,6 +729,10 @@
* SSID to showing it, which is confusing so
* drop this information.
*/
+
+ f = rcu_access_pointer(tmp->pub.beacon_ies);
+ kfree_rcu((struct cfg80211_bss_ies *)f,
+ rcu_head);
goto drop;
}
@@ -761,6 +762,11 @@
kfree_rcu((struct cfg80211_bss_ies *)old,
rcu_head);
}
+
+ found->pub.beacon_interval = tmp->pub.beacon_interval;
+ found->pub.signal = tmp->pub.signal;
+ found->pub.capability = tmp->pub.capability;
+ found->ts = tmp->ts;
} else {
struct cfg80211_internal_bss *new;
struct cfg80211_internal_bss *hidden;
@@ -1056,6 +1062,7 @@
if (IS_ERR(rdev))
return PTR_ERR(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
if (rdev->scan_req) {
err = -EBUSY;
goto out;
@@ -1162,6 +1169,7 @@
dev_hold(dev);
}
out:
+ mutex_unlock(&rdev->sched_scan_mtx);
kfree(creq);
cfg80211_unlock_rdev(rdev);
return err;
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index f432bd3..09d994d 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -85,6 +85,7 @@
ASSERT_RTNL();
ASSERT_RDEV_LOCK(rdev);
ASSERT_WDEV_LOCK(wdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
if (rdev->scan_req)
return -EBUSY;
@@ -320,11 +321,9 @@
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
- mutex_lock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx);
wdev_lock(wdev);
__cfg80211_sme_scan_done(dev);
wdev_unlock(wdev);
- mutex_unlock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx);
}
void cfg80211_sme_rx_auth(struct net_device *dev,
@@ -924,9 +923,12 @@
int err;
mutex_lock(&rdev->devlist_mtx);
+ /* might request scan - scan_mtx -> wdev_mtx dependency */
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(dev->ieee80211_ptr);
err = __cfg80211_connect(rdev, dev, connect, connkeys, NULL);
wdev_unlock(dev->ieee80211_ptr);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
return err;
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index b7a5313..7586de77 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -27,7 +27,8 @@
#define WIPHY_PR_ARG __entry->wiphy_name
#define WDEV_ENTRY __field(u32, id)
-#define WDEV_ASSIGN (__entry->id) = (wdev ? wdev->identifier : 0)
+#define WDEV_ASSIGN (__entry->id) = (!IS_ERR_OR_NULL(wdev) \
+ ? wdev->identifier : 0)
#define WDEV_PR_FMT "wdev(%u)"
#define WDEV_PR_ARG (__entry->id)
@@ -1778,7 +1779,7 @@
),
TP_fast_assign(
WIPHY_ASSIGN;
- WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
__entry->acl_policy = params->acl_policy;
),
TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", acl policy: %d",
diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c
index fb9622f..e79cb5c 100644
--- a/net/wireless/wext-sme.c
+++ b/net/wireless/wext-sme.c
@@ -89,6 +89,7 @@
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
if (wdev->sme_state != CFG80211_SME_IDLE) {
@@ -135,6 +136,7 @@
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
@@ -190,6 +192,7 @@
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
err = 0;
@@ -223,6 +226,7 @@
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
@@ -285,6 +289,7 @@
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
if (wdev->sme_state != CFG80211_SME_IDLE) {
@@ -313,6 +318,7 @@
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c
index 35754cc..8dafe6d3 100644
--- a/net/xfrm/xfrm_replay.c
+++ b/net/xfrm/xfrm_replay.c
@@ -334,6 +334,70 @@
x->xflags &= ~XFRM_TIME_DEFER;
}
+static void xfrm_replay_notify_esn(struct xfrm_state *x, int event)
+{
+ u32 seq_diff, oseq_diff;
+ struct km_event c;
+ struct xfrm_replay_state_esn *replay_esn = x->replay_esn;
+ struct xfrm_replay_state_esn *preplay_esn = x->preplay_esn;
+
+ /* we send notify messages in case
+ * 1. we updated on of the sequence numbers, and the seqno difference
+ * is at least x->replay_maxdiff, in this case we also update the
+ * timeout of our timer function
+ * 2. if x->replay_maxage has elapsed since last update,
+ * and there were changes
+ *
+ * The state structure must be locked!
+ */
+
+ switch (event) {
+ case XFRM_REPLAY_UPDATE:
+ if (!x->replay_maxdiff)
+ break;
+
+ if (replay_esn->seq_hi == preplay_esn->seq_hi)
+ seq_diff = replay_esn->seq - preplay_esn->seq;
+ else
+ seq_diff = ~preplay_esn->seq + replay_esn->seq + 1;
+
+ if (replay_esn->oseq_hi == preplay_esn->oseq_hi)
+ oseq_diff = replay_esn->oseq - preplay_esn->oseq;
+ else
+ oseq_diff = ~preplay_esn->oseq + replay_esn->oseq + 1;
+
+ if (seq_diff < x->replay_maxdiff &&
+ oseq_diff < x->replay_maxdiff) {
+
+ if (x->xflags & XFRM_TIME_DEFER)
+ event = XFRM_REPLAY_TIMEOUT;
+ else
+ return;
+ }
+
+ break;
+
+ case XFRM_REPLAY_TIMEOUT:
+ if (memcmp(x->replay_esn, x->preplay_esn,
+ xfrm_replay_state_esn_len(replay_esn)) == 0) {
+ x->xflags |= XFRM_TIME_DEFER;
+ return;
+ }
+
+ break;
+ }
+
+ memcpy(x->preplay_esn, x->replay_esn,
+ xfrm_replay_state_esn_len(replay_esn));
+ c.event = XFRM_MSG_NEWAE;
+ c.data.aevent = event;
+ km_state_notify(x, &c);
+
+ if (x->replay_maxage &&
+ !mod_timer(&x->rtimer, jiffies + x->replay_maxage))
+ x->xflags &= ~XFRM_TIME_DEFER;
+}
+
static int xfrm_replay_overflow_esn(struct xfrm_state *x, struct sk_buff *skb)
{
int err = 0;
@@ -510,7 +574,7 @@
.advance = xfrm_replay_advance_esn,
.check = xfrm_replay_check_esn,
.recheck = xfrm_replay_recheck_esn,
- .notify = xfrm_replay_notify_bmp,
+ .notify = xfrm_replay_notify_esn,
.overflow = xfrm_replay_overflow_esn,
};
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index ecdf30e..4aba764 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -173,7 +173,7 @@
"Line Out", "Speaker", "HP Out", "CD",
"SPDIF Out", "Digital Out", "Modem Line", "Modem Hand",
"Line In", "Aux", "Mic", "Telephony",
- "SPDIF In", "Digitial In", "Reserved", "Other"
+ "SPDIF In", "Digital In", "Reserved", "Other"
};
return jack_types[(cfg & AC_DEFCFG_DEVICE)
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index 7dd8463..d0d7ac1 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -320,7 +320,7 @@
unsigned char *buf, int *eld_size)
{
int i;
- int ret;
+ int ret = 0;
int size;
/*
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 43c2ea5..2dbe767 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -740,7 +740,7 @@
static void path_power_down_sync(struct hda_codec *codec, struct nid_path *path)
{
struct hda_gen_spec *spec = codec->spec;
- bool changed;
+ bool changed = false;
int i;
if (!spec->power_down_unused || path->active)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 418bfc0..bcd40ee 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -134,8 +134,8 @@
* this may give more power-saving, but will take longer time to
* wake up.
*/
-static int power_save_controller = -1;
-module_param(power_save_controller, bint, 0644);
+static bool power_save_controller = 1;
+module_param(power_save_controller, bool, 0644);
MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode.");
#endif /* CONFIG_PM */
@@ -2931,8 +2931,6 @@
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
- if (power_save_controller > 0)
- return 0;
if (!power_save_controller ||
!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return -EBUSY;
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 78e1827..de8ac5c 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1196,7 +1196,7 @@
_snd_printd(SND_PR_VERBOSE,
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
- codec->addr, pin_nid, eld->monitor_present, eld->eld_valid);
+ codec->addr, pin_nid, pin_eld->monitor_present, eld->eld_valid);
if (eld->eld_valid) {
if (snd_hdmi_get_eld(codec, pin_nid, eld->eld_buffer,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 563c24d..f15c36b 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3440,7 +3440,8 @@
const hda_nid_t *ssids;
if (codec->vendor_id == 0x10ec0272 || codec->vendor_id == 0x10ec0663 ||
- codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670)
+ codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670 ||
+ codec->vendor_id == 0x10ec0671)
ssids = alc663_ssids;
else
ssids = alc662_ssids;
@@ -3894,6 +3895,7 @@
{ .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
{ .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 },
{ .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },
+ { .id = 0x10ec0671, .name = "ALC671", .patch = patch_alc662 },
{ .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
old mode 100755
new mode 100644
diff --git a/sound/soc/codecs/max98090.h b/sound/soc/codecs/max98090.h
old mode 100755
new mode 100644
diff --git a/sound/soc/codecs/si476x.c b/sound/soc/codecs/si476x.c
index f2d61a1..566ea32 100644
--- a/sound/soc/codecs/si476x.c
+++ b/sound/soc/codecs/si476x.c
@@ -159,6 +159,7 @@
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S8:
width = SI476X_PCM_FORMAT_S8;
+ break;
case SNDRV_PCM_FORMAT_S16_LE:
width = SI476X_PCM_FORMAT_S16_LE;
break;
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index f3f7e75..9af1bdd 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -828,7 +828,8 @@
&buf_list);
if (!buf) {
adsp_err(dsp, "Out of memory\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_fw;
}
adsp_dbg(dsp, "%s.%d: Writing %d bytes at %x\n",
@@ -865,7 +866,7 @@
wm_adsp_buf_free(&buf_list);
out:
kfree(file);
- return 0;
+ return ret;
}
int wm_adsp1_init(struct wm_adsp *adsp)
diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c
index 55464a5..810c7ee 100644
--- a/sound/soc/fsl/imx-ssi.c
+++ b/sound/soc/fsl/imx-ssi.c
@@ -496,6 +496,8 @@
if (imx_ssi->ac97_reset)
imx_ssi->ac97_reset(ac97);
+ /* First read sometimes fails, do a dummy read */
+ imx_ssi_ac97_read(ac97, 0);
}
static void imx_ssi_ac97_warm_reset(struct snd_ac97 *ac97)
@@ -504,6 +506,9 @@
if (imx_ssi->ac97_warm_reset)
imx_ssi->ac97_warm_reset(ac97);
+
+ /* First read sometimes fails, do a dummy read */
+ imx_ssi_ac97_read(ac97, 0);
}
struct snd_ac97_bus_ops soc_ac97_ops = {
diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
index 8e52c14..eb43738 100644
--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -51,7 +51,7 @@
.num_links = ARRAY_SIZE(pcm030_fabric_dai),
};
-static int __init pcm030_fabric_probe(struct platform_device *op)
+static int pcm030_fabric_probe(struct platform_device *op)
{
struct device_node *np = op->dev.of_node;
struct device_node *platform_np;
diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c
index 19eff8f..1a8b03e 100644
--- a/sound/soc/sh/dma-sh7760.c
+++ b/sound/soc/sh/dma-sh7760.c
@@ -342,8 +342,8 @@
return 0;
}
-static struct snd_soc_platform sh7760_soc_platform = {
- .pcm_ops = &camelot_pcm_ops,
+static struct snd_soc_platform_driver sh7760_soc_platform = {
+ .ops = &camelot_pcm_ops,
.pcm_new = camelot_pcm_new,
.pcm_free = camelot_pcm_free,
};
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index b7e84a7..507d251 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3140,7 +3140,7 @@
if (params->mask) {
ret = regmap_read(codec->control_data, params->base, &val);
if (ret != 0)
- return ret;
+ goto out;
val &= params->mask;
@@ -3158,13 +3158,15 @@
((u32 *)data)[0] |= cpu_to_be32(val);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
}
ret = regmap_raw_write(codec->control_data, params->base,
data, len);
+out:
kfree(data);
return ret;
@@ -4197,7 +4199,6 @@
dev_err(card->dev,
"ASoC: Property '%s' index %d could not be read: %d\n",
propname, 2 * i, ret);
- kfree(routes);
return -EINVAL;
}
ret = of_property_read_string_index(np, propname,
@@ -4206,7 +4207,6 @@
dev_err(card->dev,
"ASoC: Property '%s' index %d could not be read: %d\n",
propname, (2 * i) + 1, ret);
- kfree(routes);
return -EINVAL;
}
}
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 1d6a9b3..d6d9ba2 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -831,6 +831,9 @@
if (path->weak)
continue;
+ if (path->walking)
+ return 1;
+
if (path->walked)
continue;
@@ -838,6 +841,7 @@
if (path->sink && path->connect) {
path->walked = 1;
+ path->walking = 1;
/* do we need to add this widget to the list ? */
if (list) {
@@ -847,11 +851,14 @@
dev_err(widget->dapm->dev,
"ASoC: could not add widget %s\n",
widget->name);
+ path->walking = 0;
return con;
}
}
con += is_connected_output_ep(path->sink, list);
+
+ path->walking = 0;
}
}
@@ -931,6 +938,9 @@
if (path->weak)
continue;
+ if (path->walking)
+ return 1;
+
if (path->walked)
continue;
@@ -938,6 +948,7 @@
if (path->source && path->connect) {
path->walked = 1;
+ path->walking = 1;
/* do we need to add this widget to the list ? */
if (list) {
@@ -947,11 +958,14 @@
dev_err(widget->dapm->dev,
"ASoC: could not add widget %s\n",
widget->name);
+ path->walking = 0;
return con;
}
}
con += is_connected_input_ep(path->source, list);
+
+ path->walking = 0;
}
}
diff --git a/sound/soc/spear/spear_pcm.c b/sound/soc/spear/spear_pcm.c
index 9b76cc5..5e7aebe 100644
--- a/sound/soc/spear/spear_pcm.c
+++ b/sound/soc/spear/spear_pcm.c
@@ -149,9 +149,9 @@
static u64 spear_pcm_dmamask = DMA_BIT_MASK(32);
-static int spear_pcm_new(struct snd_card *card,
- struct snd_soc_dai *dai, struct snd_pcm *pcm)
+static int spear_pcm_new(struct snd_soc_pcm_runtime *rtd)
{
+ struct snd_card *card = rtd->card->snd_card;
int ret;
if (!card->dev->dma_mask)
@@ -159,16 +159,16 @@
if (!card->dev->coherent_dma_mask)
card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
- if (dai->driver->playback.channels_min) {
- ret = spear_pcm_preallocate_dma_buffer(pcm,
+ if (rtd->cpu_dai->driver->playback.channels_min) {
+ ret = spear_pcm_preallocate_dma_buffer(rtd->pcm,
SNDRV_PCM_STREAM_PLAYBACK,
spear_pcm_hardware.buffer_bytes_max);
if (ret)
return ret;
}
- if (dai->driver->capture.channels_min) {
- ret = spear_pcm_preallocate_dma_buffer(pcm,
+ if (rtd->cpu_dai->driver->capture.channels_min) {
+ ret = spear_pcm_preallocate_dma_buffer(rtd->pcm,
SNDRV_PCM_STREAM_CAPTURE,
spear_pcm_hardware.buffer_bytes_max);
if (ret)
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 5e634a2..9e2703a 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -253,7 +253,7 @@
{
struct usb_device *dev = chip->dev;
unsigned char data[4];
- int err, crate;
+ int err, cur_rate, prev_rate;
int clock = snd_usb_clock_find_source(chip, fmt->clock);
if (clock < 0)
@@ -266,6 +266,19 @@
return -ENXIO;
}
+ err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
+ data, sizeof(data));
+ if (err < 0) {
+ snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
+ dev->devnum, iface, fmt->altsetting);
+ prev_rate = 0;
+ } else {
+ prev_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
+ }
+
data[0] = rate;
data[1] = rate >> 8;
data[2] = rate >> 16;
@@ -280,19 +293,31 @@
return err;
}
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8,
- snd_usb_ctrl_intf(chip) | (clock << 8),
- data, sizeof(data))) < 0) {
+ err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
+ data, sizeof(data));
+ if (err < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
dev->devnum, iface, fmt->altsetting);
- return err;
+ cur_rate = 0;
+ } else {
+ cur_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
}
- crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
- if (crate != rate)
- snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+ if (cur_rate != rate) {
+ snd_printd(KERN_WARNING
+ "current rate %d is different from the runtime rate %d\n",
+ cur_rate, rate);
+ }
+
+ /* Some devices doesn't respond to sample rate changes while the
+ * interface is active. */
+ if (rate != prev_rate) {
+ usb_set_interface(dev, iface, 0);
+ usb_set_interface(dev, iface, fmt->altsetting);
+ }
return 0;
}
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index adc68fe..f18013f 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1541,21 +1541,38 @@
}
int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
- gpa_t gpa)
+ gpa_t gpa, unsigned long len)
{
struct kvm_memslots *slots = kvm_memslots(kvm);
int offset = offset_in_page(gpa);
- gfn_t gfn = gpa >> PAGE_SHIFT;
+ gfn_t start_gfn = gpa >> PAGE_SHIFT;
+ gfn_t end_gfn = (gpa + len - 1) >> PAGE_SHIFT;
+ gfn_t nr_pages_needed = end_gfn - start_gfn + 1;
+ gfn_t nr_pages_avail;
ghc->gpa = gpa;
ghc->generation = slots->generation;
- ghc->memslot = gfn_to_memslot(kvm, gfn);
- ghc->hva = gfn_to_hva_many(ghc->memslot, gfn, NULL);
- if (!kvm_is_error_hva(ghc->hva))
+ ghc->len = len;
+ ghc->memslot = gfn_to_memslot(kvm, start_gfn);
+ ghc->hva = gfn_to_hva_many(ghc->memslot, start_gfn, &nr_pages_avail);
+ if (!kvm_is_error_hva(ghc->hva) && nr_pages_avail >= nr_pages_needed) {
ghc->hva += offset;
- else
- return -EFAULT;
-
+ } else {
+ /*
+ * If the requested region crosses two memslots, we still
+ * verify that the entire region is valid here.
+ */
+ while (start_gfn <= end_gfn) {
+ ghc->memslot = gfn_to_memslot(kvm, start_gfn);
+ ghc->hva = gfn_to_hva_many(ghc->memslot, start_gfn,
+ &nr_pages_avail);
+ if (kvm_is_error_hva(ghc->hva))
+ return -EFAULT;
+ start_gfn += nr_pages_avail;
+ }
+ /* Use the slow path for cross page reads and writes. */
+ ghc->memslot = NULL;
+ }
return 0;
}
EXPORT_SYMBOL_GPL(kvm_gfn_to_hva_cache_init);
@@ -1566,8 +1583,13 @@
struct kvm_memslots *slots = kvm_memslots(kvm);
int r;
+ BUG_ON(len > ghc->len);
+
if (slots->generation != ghc->generation)
- kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa);
+ kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa, ghc->len);
+
+ if (unlikely(!ghc->memslot))
+ return kvm_write_guest(kvm, ghc->gpa, data, len);
if (kvm_is_error_hva(ghc->hva))
return -EFAULT;
@@ -1587,8 +1609,13 @@
struct kvm_memslots *slots = kvm_memslots(kvm);
int r;
+ BUG_ON(len > ghc->len);
+
if (slots->generation != ghc->generation)
- kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa);
+ kvm_gfn_to_hva_cache_init(kvm, ghc, ghc->gpa, ghc->len);
+
+ if (unlikely(!ghc->memslot))
+ return kvm_read_guest(kvm, ghc->gpa, data, len);
if (kvm_is_error_hva(ghc->hva))
return -EFAULT;
