[TG3]: Add GPIO3 for 5752
Add bit definitions for the new GPIO3 in 5752. GPIO3 must be driven as
output when it is unused.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index a4d0d61..a94631a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5353,6 +5353,11 @@
gpio_mask = GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE2 |
GRC_LCLCTRL_GPIO_OUTPUT0 | GRC_LCLCTRL_GPIO_OUTPUT2;
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
+ gpio_mask |= GRC_LCLCTRL_GPIO_OE3 |
+ GRC_LCLCTRL_GPIO_OUTPUT3;
+
tp->grc_local_ctrl |= tr32(GRC_LOCAL_CTRL) & gpio_mask;
/* GPIO1 must be driven high for eeprom write protect */
@@ -8077,6 +8082,11 @@
(tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT))
tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
GRC_LCLCTRL_GPIO_OUTPUT1);
+ /* Unused GPIO3 must be driven as output on 5752 because there
+ * are no pull-up resistors on unused GPIO pins.
+ */
+ else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
+ tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3;
/* Force the chip into D0. */
err = tg3_set_power_state(tp, 0);
