Ath5k: suspend/resume fixes
- free and re-request irq since it might have changed during suspend
- disable and enable msi
- don't set D0 state of the device, it's already done by the PCI layer
- do restore_state before enable_device, it's safer
- check ath5k_init return value
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 3aa22dc..7273e9f 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -592,6 +592,9 @@
ath5k_led_off(sc);
ath5k_stop_hw(sc);
+
+ free_irq(pdev->irq, sc);
+ pci_disable_msi(pdev);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
@@ -607,15 +610,12 @@
struct ath5k_hw *ah = sc->ah;
int i, err;
- err = pci_set_power_state(pdev, PCI_D0);
- if (err)
- return err;
+ pci_restore_state(pdev);
err = pci_enable_device(pdev);
if (err)
return err;
- pci_restore_state(pdev);
/*
* Suspend/Resume resets the PCI configuration space, so we have to
* re-disable the RETRY_TIMEOUT register (0x41) to keep
@@ -623,7 +623,17 @@
*/
pci_write_config_byte(pdev, 0x41, 0);
- ath5k_init(sc);
+ pci_enable_msi(pdev);
+
+ err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+ if (err) {
+ ATH5K_ERR(sc, "request_irq failed\n");
+ goto err_msi;
+ }
+
+ err = ath5k_init(sc);
+ if (err)
+ goto err_irq;
ath5k_led_enable(sc);
/*
@@ -637,6 +647,12 @@
ath5k_hw_reset_key(ah, i);
return 0;
+err_irq:
+ free_irq(pdev->irq, sc);
+err_msi:
+ pci_disable_msi(pdev);
+ pci_disable_device(pdev);
+ return err;
}
#endif /* CONFIG_PM */
