NFC: logging neatening
Add missing terminating newlines to nfc_info and nfc_err
to avoid possible interleaving from other messages.
Miscellanea:
o typo fix of "unknonwn" in message
o remove unnecessary OOM messages as there's a generic dump_stack()
o realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c
index 4ac4d31..87d5099 100644
--- a/drivers/nfc/port100.c
+++ b/drivers/nfc/port100.c
@@ -604,11 +604,11 @@
case -ECONNRESET:
case -ENOENT:
nfc_err(&dev->interface->dev,
- "The urb has been canceled (status %d)", urb->status);
+ "The urb has been canceled (status %d)\n", urb->status);
goto sched_wq;
case -ESHUTDOWN:
default:
- nfc_err(&dev->interface->dev, "Urb failure (status %d)",
+ nfc_err(&dev->interface->dev, "Urb failure (status %d)\n",
urb->status);
goto sched_wq;
}
@@ -616,7 +616,7 @@
in_frame = dev->in_urb->transfer_buffer;
if (!port100_rx_frame_is_valid(in_frame)) {
- nfc_err(&dev->interface->dev, "Received an invalid frame");
+ nfc_err(&dev->interface->dev, "Received an invalid frame\n");
cmd->status = -EIO;
goto sched_wq;
}
@@ -626,7 +626,7 @@
if (!port100_rx_frame_is_cmd_response(dev, in_frame)) {
nfc_err(&dev->interface->dev,
- "It's not the response to the last command");
+ "It's not the response to the last command\n");
cmd->status = -EIO;
goto sched_wq;
}
@@ -657,11 +657,11 @@
case -ECONNRESET:
case -ENOENT:
nfc_err(&dev->interface->dev,
- "The urb has been stopped (status %d)", urb->status);
+ "The urb has been stopped (status %d)\n", urb->status);
goto sched_wq;
case -ESHUTDOWN:
default:
- nfc_err(&dev->interface->dev, "Urb failure (status %d)",
+ nfc_err(&dev->interface->dev, "Urb failure (status %d)\n",
urb->status);
goto sched_wq;
}
@@ -669,7 +669,7 @@
in_frame = dev->in_urb->transfer_buffer;
if (!port100_rx_frame_is_ack(in_frame)) {
- nfc_err(&dev->interface->dev, "Received an invalid ack");
+ nfc_err(&dev->interface->dev, "Received an invalid ack\n");
cmd->status = -EIO;
goto sched_wq;
}
@@ -677,7 +677,7 @@
rc = port100_submit_urb_for_response(dev, GFP_ATOMIC);
if (rc) {
nfc_err(&dev->interface->dev,
- "usb_submit_urb failed with result %d", rc);
+ "usb_submit_urb failed with result %d\n", rc);
cmd->status = rc;
goto sched_wq;
}
@@ -873,11 +873,11 @@
case -ECONNRESET:
case -ENOENT:
nfc_err(&dev->interface->dev,
- "The urb has been stopped (status %d)", urb->status);
+ "The urb has been stopped (status %d)\n", urb->status);
break;
case -ESHUTDOWN:
default:
- nfc_err(&dev->interface->dev, "Urb failure (status %d)",
+ nfc_err(&dev->interface->dev, "Urb failure (status %d)\n",
urb->status);
}
}
@@ -1094,7 +1094,7 @@
if (resp->len < 4) {
nfc_err(&dev->interface->dev,
- "Invalid packet length received.\n");
+ "Invalid packet length received\n");
rc = -EIO;
goto error;
}
@@ -1250,7 +1250,7 @@
PORT100_MDAA_TGT_WAS_ACTIVATED_MASK;
break;
default:
- nfc_err(&dev->interface->dev, "Unknonwn command type.\n");
+ nfc_err(&dev->interface->dev, "Unknown command type\n");
return false;
}
@@ -1481,7 +1481,7 @@
cmd_type_mask = port100_get_command_type_mask(dev);
if (!cmd_type_mask) {
nfc_err(&interface->dev,
- "Could not get supported command types.\n");
+ "Could not get supported command types\n");
rc = -ENODEV;
goto error;
}
@@ -1494,7 +1494,7 @@
rc = port100_set_command_type(dev, dev->cmd_type);
if (rc) {
nfc_err(&interface->dev,
- "The device does not support command type %u.\n",
+ "The device does not support command type %u\n",
dev->cmd_type);
goto error;
}
@@ -1502,7 +1502,7 @@
fw_version = port100_get_firmware_version(dev);
if (!fw_version)
nfc_err(&interface->dev,
- "Could not get device firmware version.\n");
+ "Could not get device firmware version\n");
nfc_info(&interface->dev,
"Sony NFC Port-100 Series attached (firmware v%x.%02x)\n",
@@ -1515,7 +1515,7 @@
dev->skb_tailroom);
if (!dev->nfc_digital_dev) {
nfc_err(&interface->dev,
- "Could not allocate nfc_digital_dev.\n");
+ "Could not allocate nfc_digital_dev\n");
rc = -ENOMEM;
goto error;
}
@@ -1526,7 +1526,7 @@
rc = nfc_digital_register_device(dev->nfc_digital_dev);
if (rc) {
nfc_err(&interface->dev,
- "Could not register digital device.\n");
+ "Could not register digital device\n");
goto free_nfc_dev;
}
@@ -1562,7 +1562,7 @@
kfree(dev->cmd);
- nfc_info(&interface->dev, "Sony Port-100 NFC device disconnected");
+ nfc_info(&interface->dev, "Sony Port-100 NFC device disconnected\n");
}
static struct usb_driver port100_driver = {
