mac80211: support active monitor interfaces
Support them only if the driver advertises support for them via
IEEE80211_HW_SUPPORTS_ACTIVE_MONITOR. Unlike normal monitor interfaces,
they are added to the driver, along with their MAC address.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 232edf7..9034da1 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -73,16 +73,19 @@
struct ieee80211_local *local = sdata->local;
if (ieee80211_sdata_running(sdata)) {
+ u32 mask = MONITOR_FLAG_COOK_FRAMES |
+ MONITOR_FLAG_ACTIVE;
+
/*
- * Prohibit MONITOR_FLAG_COOK_FRAMES to be
- * changed while the interface is up.
+ * Prohibit MONITOR_FLAG_COOK_FRAMES and
+ * MONITOR_FLAG_ACTIVE to be changed while the
+ * interface is up.
* Else we would need to add a lot of cruft
* to update everything:
* cooked_mntrs, monitor and all fif_* counters
* reconfigure hardware
*/
- if ((*flags & MONITOR_FLAG_COOK_FRAMES) !=
- (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES))
+ if ((*flags & mask) != (sdata->u.mntr_flags & mask))
return -EBUSY;
ieee80211_adjust_monitor_flags(sdata, -1);
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 169664c..b931c96 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -146,7 +146,8 @@
if (WARN_ON(sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
(sdata->vif.type == NL80211_IFTYPE_MONITOR &&
- !(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))))
+ !(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF) &&
+ !(sdata->u.mntr_flags & MONITOR_FLAG_ACTIVE))))
return -EINVAL;
trace_drv_add_interface(local, sdata);
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index ceef644..7cabaf2 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -159,7 +159,8 @@
return 0;
}
-static int ieee80211_verify_mac(struct ieee80211_local *local, u8 *addr)
+static int ieee80211_verify_mac(struct ieee80211_local *local, u8 *addr,
+ bool check_dup)
{
struct ieee80211_sub_if_data *sdata;
u64 new, mask, tmp;
@@ -179,10 +180,13 @@
((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
+ if (!check_dup)
+ return ret;
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
- if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
+ if (sdata->vif.type == NL80211_IFTYPE_MONITOR &&
+ !(sdata->u.mntr_flags & MONITOR_FLAG_ACTIVE))
continue;
m = sdata->vif.addr;
@@ -204,12 +208,17 @@
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sockaddr *sa = addr;
+ bool check_dup = true;
int ret;
if (ieee80211_sdata_running(sdata))
return -EBUSY;
- ret = ieee80211_verify_mac(sdata->local, sa->sa_data);
+ if (sdata->vif.type == NL80211_IFTYPE_MONITOR &&
+ !(sdata->u.mntr_flags & MONITOR_FLAG_ACTIVE))
+ check_dup = false;
+
+ ret = ieee80211_verify_mac(sdata->local, sa->sa_data, check_dup);
if (ret)
return ret;
@@ -541,7 +550,11 @@
break;
}
- if (local->monitors == 0 && local->open_count == 0) {
+ if (sdata->u.mntr_flags & MONITOR_FLAG_ACTIVE) {
+ res = drv_add_interface(local, sdata);
+ if (res)
+ goto err_stop;
+ } else if (local->monitors == 0 && local->open_count == 0) {
res = ieee80211_add_virtual_monitor(local);
if (res)
goto err_stop;
@@ -919,7 +932,11 @@
mutex_lock(&local->mtx);
ieee80211_recalc_idle(local);
mutex_unlock(&local->mtx);
- break;
+
+ if (!(sdata->u.mntr_flags & MONITOR_FLAG_ACTIVE))
+ break;
+
+ /* fall through */
default:
if (going_down)
drv_remove_interface(local, sdata);
@@ -1068,7 +1085,7 @@
.ndo_start_xmit = ieee80211_monitor_start_xmit,
.ndo_set_rx_mode = ieee80211_set_multicast_list,
.ndo_change_mtu = ieee80211_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
+ .ndo_set_mac_address = ieee80211_change_mac,
.ndo_select_queue = ieee80211_monitor_select_queue,
};
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 2a8d759..89a8377 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -560,6 +560,9 @@
list_for_each_entry(sdata, &local->interfaces, list) {
switch (sdata->vif.type) {
case NL80211_IFTYPE_MONITOR:
+ if (!(sdata->u.mntr_flags & MONITOR_FLAG_ACTIVE))
+ continue;
+ break;
case NL80211_IFTYPE_AP_VLAN:
continue;
default:
@@ -598,6 +601,9 @@
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
switch (sdata->vif.type) {
case NL80211_IFTYPE_MONITOR:
+ if (!(sdata->u.mntr_flags & MONITOR_FLAG_ACTIVE))
+ continue;
+ break;
case NL80211_IFTYPE_AP_VLAN:
continue;
default:
