/*
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * BSD LICENSE
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in
 *     the documentation and/or other materials provided with the
 *     distribution.
 *   * Neither the name of Intel Corporation nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _ISCI_PORT_H_
#define _ISCI_PORT_H_

#include <scsi/libsas.h>
#include "isci.h"
#include "sas.h"
#include "phy.h"

#define SCIC_SDS_DUMMY_PORT   0xFF

struct isci_phy;
struct isci_host;

enum isci_status {
	isci_freed        = 0x00,
	isci_starting     = 0x01,
	isci_ready        = 0x02,
	isci_ready_for_io = 0x03,
	isci_stopping     = 0x04,
	isci_stopped      = 0x05,
};

/**
 * struct scic_sds_port
 *
 * The core port object provides the the abstraction for an SCU port.
 */
struct scic_sds_port {
	/**
	 * This field contains the information for the base port state machine.
	 */
	struct sci_base_state_machine sm;

	bool ready_exit;

	/**
	 * This field is the port index that is reported to the SCI USER.
	 * This allows the actual hardware physical port to change without
	 * the SCI USER getting a different answer for the get port index.
	 */
	u8 logical_port_index;

	/**
	 * This field is the port index used to program the SCU hardware.
	 */
	u8 physical_port_index;

	/**
	 * This field contains the active phy mask for the port.
	 * This mask is used in conjunction with the phy state to determine
	 * which phy to select for some port operations.
	 */
	u8 active_phy_mask;

	u16 reserved_rni;
	u16 reserved_tag;

	/**
	 * This field contains the count of the io requests started on this port
	 * object.  It is used to control controller shutdown.
	 */
	u32 started_request_count;

	/**
	 * This field contains the number of devices assigned to this port.
	 * It is used to control port start requests.
	 */
	u32 assigned_device_count;

	/**
	 * This field contains the reason for the port not going ready.  It is
	 * assigned in the state handlers and used in the state transition.
	 */
	u32 not_ready_reason;

	/**
	 * This field is the table of phys assigned to the port.
	 */
	struct scic_sds_phy *phy_table[SCI_MAX_PHYS];

	/**
	 * This field is a pointer back to the controller that owns this
	 * port object.
	 */
	struct scic_sds_controller *owning_controller;

	/* timer used for port start/stop operations */
	struct sci_timer	timer;

	/**
	 * This field is the pointer to the port task scheduler registers
	 * for the SCU hardware.
	 */
	struct scu_port_task_scheduler_registers __iomem
		*port_task_scheduler_registers;

	/**
	 * This field is identical for all port objects and points to the port
	 * task scheduler group PE configuration registers.
	 * It is used to assign PEs to a port.
	 */
	u32 __iomem *port_pe_configuration_register;

	/**
	 * This field is the VIIT register space for ths port object.
	 */
	struct scu_viit_entry __iomem *viit_registers;
};


/**
 * struct isci_port - This class represents the port object used to internally
 *    represent libsas port objects. It also keeps a list of remote device
 *    objects.
 *
 *
 */
struct isci_port {
	enum isci_status status;
	#define IPORT_BCN_BLOCKED 0
	#define IPORT_BCN_PENDING 1
	unsigned long flags;
	atomic_t event;
	struct isci_host *isci_host;
	struct asd_sas_port sas_port;
	struct list_head remote_dev_list;
	spinlock_t state_lock;
	struct list_head domain_dev_list;
	struct completion start_complete;
	struct completion hard_reset_complete;
	enum sci_status hard_reset_status;
	struct scic_sds_port sci;
};

static inline struct isci_port *sci_port_to_iport(struct scic_sds_port *sci_port)
{
	struct isci_port *iport = container_of(sci_port, typeof(*iport), sci);

	return iport;
}

enum scic_port_not_ready_reason_code {
	SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS,
	SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED,
	SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION,
	SCIC_PORT_NOT_READY_RECONFIGURING,

	SCIC_PORT_NOT_READY_REASON_CODE_MAX
};

struct scic_port_end_point_properties {
	struct sci_sas_address sas_address;
	struct scic_phy_proto protocols;
};

struct scic_port_properties {
	u32 index;
	struct scic_port_end_point_properties local;
	struct scic_port_end_point_properties remote;
	u32 phy_mask;
};

/**
 * enum scic_sds_port_states - This enumeration depicts all the states for the
 *    common port state machine.
 *
 *
 */
enum scic_sds_port_states {
	/**
	 * This state indicates that the port has successfully been stopped.
	 * In this state no new IO operations are permitted.
	 * This state is entered from the STOPPING state.
	 */
	SCI_PORT_STOPPED,

	/**
	 * This state indicates that the port is in the process of stopping.
	 * In this state no new IO operations are permitted, but existing IO
	 * operations are allowed to complete.
	 * This state is entered from the READY state.
	 */
	SCI_PORT_STOPPING,

	/**
	 * This state indicates the port is now ready.  Thus, the user is
	 * able to perform IO operations on this port.
	 * This state is entered from the STARTING state.
	 */
	SCI_PORT_READY,

	/**
	 * The substate where the port is started and ready but has no
	 * active phys.
	 */
	SCI_PORT_SUB_WAITING,

	/**
	 * The substate where the port is started and ready and there is
	 * at least one phy operational.
	 */
	SCI_PORT_SUB_OPERATIONAL,

	/**
	 * The substate where the port is started and there was an
	 * add/remove phy event.  This state is only used in Automatic
	 * Port Configuration Mode (APC)
	 */
	SCI_PORT_SUB_CONFIGURING,

	/**
	 * This state indicates the port is in the process of performing a hard
	 * reset.  Thus, the user is unable to perform IO operations on this
	 * port.
	 * This state is entered from the READY state.
	 */
	SCI_PORT_RESETTING,

	/**
	 * This state indicates the port has failed a reset request.  This state
	 * is entered when a port reset request times out.
	 * This state is entered from the RESETTING state.
	 */
	SCI_PORT_FAILED,


};

/**
 * scic_sds_port_get_controller() -
 *
 * Helper macro to get the owning controller of this port
 */
#define scic_sds_port_get_controller(this_port)	\
	((this_port)->owning_controller)

/**
 * scic_sds_port_get_index() -
 *
 * This macro returns the physical port index for this port object
 */
#define scic_sds_port_get_index(this_port) \
	((this_port)->physical_port_index)


static inline void scic_sds_port_decrement_request_count(struct scic_sds_port *sci_port)
{
	if (WARN_ONCE(sci_port->started_request_count == 0,
		       "%s: tried to decrement started_request_count past 0!?",
			__func__))
		/* pass */;
	else
		sci_port->started_request_count--;
}

#define scic_sds_port_active_phy(port, phy) \
	(((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0)

void scic_sds_port_construct(
	struct scic_sds_port *sci_port,
	u8 port_index,
	struct scic_sds_controller *scic);

enum sci_status scic_sds_port_initialize(
	struct scic_sds_port *sci_port,
	void __iomem *port_task_scheduler_registers,
	void __iomem *port_configuration_regsiter,
	void __iomem *viit_registers);

enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port);
enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port);

enum sci_status scic_sds_port_add_phy(
	struct scic_sds_port *sci_port,
	struct scic_sds_phy *sci_phy);

enum sci_status scic_sds_port_remove_phy(
	struct scic_sds_port *sci_port,
	struct scic_sds_phy *sci_phy);

void scic_sds_port_setup_transports(
	struct scic_sds_port *sci_port,
	u32 device_id);

void isci_port_bcn_enable(struct isci_host *, struct isci_port *);

void scic_sds_port_deactivate_phy(
	struct scic_sds_port *sci_port,
	struct scic_sds_phy *sci_phy,
	bool do_notify_user);

bool scic_sds_port_link_detected(
	struct scic_sds_port *sci_port,
	struct scic_sds_phy *sci_phy);

enum sci_status scic_sds_port_link_up(struct scic_sds_port *sci_port,
				      struct scic_sds_phy *sci_phy);
enum sci_status scic_sds_port_link_down(struct scic_sds_port *sci_port,
					struct scic_sds_phy *sci_phy);

struct scic_sds_request;
struct scic_sds_remote_device;
enum sci_status scic_sds_port_start_io(
	struct scic_sds_port *sci_port,
	struct scic_sds_remote_device *sci_dev,
	struct scic_sds_request *sci_req);

enum sci_status scic_sds_port_complete_io(
	struct scic_sds_port *sci_port,
	struct scic_sds_remote_device *sci_dev,
	struct scic_sds_request *sci_req);

enum sas_linkrate scic_sds_port_get_max_allowed_speed(
	struct scic_sds_port *sci_port);

void scic_sds_port_broadcast_change_received(
	struct scic_sds_port *sci_port,
	struct scic_sds_phy *sci_phy);

bool scic_sds_port_is_valid_phy_assignment(
	struct scic_sds_port *sci_port,
	u32 phy_index);

void scic_sds_port_get_sas_address(
	struct scic_sds_port *sci_port,
	struct sci_sas_address *sas_address);

void scic_sds_port_get_attached_sas_address(
	struct scic_sds_port *sci_port,
	struct sci_sas_address *sas_address);

enum isci_status isci_port_get_state(
	struct isci_port *isci_port);

void isci_port_formed(struct asd_sas_phy *);
void isci_port_deformed(struct asd_sas_phy *);

void isci_port_init(
	struct isci_port *port,
	struct isci_host *host,
	int index);

int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
				 struct isci_phy *iphy);
#endif /* !defined(_ISCI_PORT_H_) */