/*
 * Generic SCSI-3 ALUA SCSI Device Handler
 *
 * Copyright (C) 2007-2010 Hannes Reinecke, SUSE Linux Products GmbH.
 * All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 *
 */
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_proto.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>

#define ALUA_DH_NAME "alua"
#define ALUA_DH_VER "2.0"

#define TPGS_SUPPORT_NONE		0x00
#define TPGS_SUPPORT_OPTIMIZED		0x01
#define TPGS_SUPPORT_NONOPTIMIZED	0x02
#define TPGS_SUPPORT_STANDBY		0x04
#define TPGS_SUPPORT_UNAVAILABLE	0x08
#define TPGS_SUPPORT_LBA_DEPENDENT	0x10
#define TPGS_SUPPORT_OFFLINE		0x40
#define TPGS_SUPPORT_TRANSITION		0x80
#define TPGS_SUPPORT_ALL		0xdf

#define RTPG_FMT_MASK			0x70
#define RTPG_FMT_EXT_HDR		0x10

#define TPGS_MODE_UNINITIALIZED		 -1
#define TPGS_MODE_NONE			0x0
#define TPGS_MODE_IMPLICIT		0x1
#define TPGS_MODE_EXPLICIT		0x2

#define ALUA_RTPG_SIZE			128
#define ALUA_FAILOVER_TIMEOUT		60
#define ALUA_FAILOVER_RETRIES		5
#define ALUA_RTPG_DELAY_MSECS		5

/* device handler flags */
#define ALUA_OPTIMIZE_STPG		0x01
#define ALUA_RTPG_EXT_HDR_UNSUPP	0x02
/* State machine flags */
#define ALUA_PG_RUN_RTPG		0x10
#define ALUA_PG_RUN_STPG		0x20
#define ALUA_PG_RUNNING			0x40

static uint optimize_stpg;
module_param(optimize_stpg, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(optimize_stpg, "Allow use of a non-optimized path, rather than sending a STPG, when implicit TPGS is supported (0=No,1=Yes). Default is 0.");

static LIST_HEAD(port_group_list);
static DEFINE_SPINLOCK(port_group_lock);
static struct workqueue_struct *kaluad_wq;

struct alua_port_group {
	struct kref		kref;
	struct rcu_head		rcu;
	struct list_head	node;
	struct list_head	dh_list;
	unsigned char		device_id_str[256];
	int			device_id_len;
	int			group_id;
	int			tpgs;
	int			state;
	int			pref;
	int			valid_states;
	unsigned		flags; /* used for optimizing STPG */
	unsigned char		transition_tmo;
	unsigned long		expiry;
	unsigned long		interval;
	struct delayed_work	rtpg_work;
	spinlock_t		lock;
	struct list_head	rtpg_list;
	struct scsi_device	*rtpg_sdev;
};

struct alua_dh_data {
	struct list_head	node;
	struct alua_port_group __rcu *pg;
	int			group_id;
	spinlock_t		pg_lock;
	struct scsi_device	*sdev;
	int			init_error;
	struct mutex		init_mutex;
};

struct alua_queue_data {
	struct list_head	entry;
	activate_complete	callback_fn;
	void			*callback_data;
};

#define ALUA_POLICY_SWITCH_CURRENT	0
#define ALUA_POLICY_SWITCH_ALL		1

static void alua_rtpg_work(struct work_struct *work);
static bool alua_rtpg_queue(struct alua_port_group *pg,
			    struct scsi_device *sdev,
			    struct alua_queue_data *qdata, bool force);
static void alua_check(struct scsi_device *sdev, bool force);

static void release_port_group(struct kref *kref)
{
	struct alua_port_group *pg;

	pg = container_of(kref, struct alua_port_group, kref);
	if (pg->rtpg_sdev)
		flush_delayed_work(&pg->rtpg_work);
	spin_lock(&port_group_lock);
	list_del(&pg->node);
	spin_unlock(&port_group_lock);
	kfree_rcu(pg, rcu);
}

/*
 * submit_rtpg - Issue a REPORT TARGET GROUP STATES command
 * @sdev: sdev the command should be sent to
 */
static int submit_rtpg(struct scsi_device *sdev, unsigned char *buff,
		       int bufflen, struct scsi_sense_hdr *sshdr, int flags)
{
	u8 cdb[MAX_COMMAND_SIZE];
	int req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
		REQ_FAILFAST_DRIVER;

	/* Prepare the command. */
	memset(cdb, 0x0, MAX_COMMAND_SIZE);
	cdb[0] = MAINTENANCE_IN;
	if (!(flags & ALUA_RTPG_EXT_HDR_UNSUPP))
		cdb[1] = MI_REPORT_TARGET_PGS | MI_EXT_HDR_PARAM_FMT;
	else
		cdb[1] = MI_REPORT_TARGET_PGS;
	put_unaligned_be32(bufflen, &cdb[6]);

	return scsi_execute(sdev, cdb, DMA_FROM_DEVICE, buff, bufflen, NULL,
			sshdr, ALUA_FAILOVER_TIMEOUT * HZ,
			ALUA_FAILOVER_RETRIES, req_flags, 0, NULL);
}

/*
 * submit_stpg - Issue a SET TARGET PORT GROUP command
 *
 * Currently we're only setting the current target port group state
 * to 'active/optimized' and let the array firmware figure out
 * the states of the remaining groups.
 */
static int submit_stpg(struct scsi_device *sdev, int group_id,
		       struct scsi_sense_hdr *sshdr)
{
	u8 cdb[MAX_COMMAND_SIZE];
	unsigned char stpg_data[8];
	int stpg_len = 8;
	int req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
		REQ_FAILFAST_DRIVER;

	/* Prepare the data buffer */
	memset(stpg_data, 0, stpg_len);
	stpg_data[4] = SCSI_ACCESS_STATE_OPTIMAL;
	put_unaligned_be16(group_id, &stpg_data[6]);

	/* Prepare the command. */
	memset(cdb, 0x0, MAX_COMMAND_SIZE);
	cdb[0] = MAINTENANCE_OUT;
	cdb[1] = MO_SET_TARGET_PGS;
	put_unaligned_be32(stpg_len, &cdb[6]);

	return scsi_execute(sdev, cdb, DMA_TO_DEVICE, stpg_data, stpg_len, NULL,
			sshdr, ALUA_FAILOVER_TIMEOUT * HZ,
			ALUA_FAILOVER_RETRIES, req_flags, 0, NULL);
}

static struct alua_port_group *alua_find_get_pg(char *id_str, size_t id_size,
						int group_id)
{
	struct alua_port_group *pg;

	if (!id_str || !id_size || !strlen(id_str))
		return NULL;

	list_for_each_entry(pg, &port_group_list, node) {
		if (pg->group_id != group_id)
			continue;
		if (!pg->device_id_len || pg->device_id_len != id_size)
			continue;
		if (strncmp(pg->device_id_str, id_str, id_size))
			continue;
		if (!kref_get_unless_zero(&pg->kref))
			continue;
		return pg;
	}

	return NULL;
}

/*
 * alua_alloc_pg - Allocate a new port_group structure
 * @sdev: scsi device
 * @group_id: port group id
 * @tpgs: target port group settings
 *
 * Allocate a new port_group structure for a given
 * device.
 */
static struct alua_port_group *alua_alloc_pg(struct scsi_device *sdev,
					     int group_id, int tpgs)
{
	struct alua_port_group *pg, *tmp_pg;

	pg = kzalloc(sizeof(struct alua_port_group), GFP_KERNEL);
	if (!pg)
		return ERR_PTR(-ENOMEM);

	pg->device_id_len = scsi_vpd_lun_id(sdev, pg->device_id_str,
					    sizeof(pg->device_id_str));
	if (pg->device_id_len <= 0) {
		/*
		 * TPGS supported but no device identification found.
		 * Generate private device identification.
		 */
		sdev_printk(KERN_INFO, sdev,
			    "%s: No device descriptors found\n",
			    ALUA_DH_NAME);
		pg->device_id_str[0] = '\0';
		pg->device_id_len = 0;
	}
	pg->group_id = group_id;
	pg->tpgs = tpgs;
	pg->state = SCSI_ACCESS_STATE_OPTIMAL;
	pg->valid_states = TPGS_SUPPORT_ALL;
	if (optimize_stpg)
		pg->flags |= ALUA_OPTIMIZE_STPG;
	kref_init(&pg->kref);
	INIT_DELAYED_WORK(&pg->rtpg_work, alua_rtpg_work);
	INIT_LIST_HEAD(&pg->rtpg_list);
	INIT_LIST_HEAD(&pg->node);
	INIT_LIST_HEAD(&pg->dh_list);
	spin_lock_init(&pg->lock);

	spin_lock(&port_group_lock);
	tmp_pg = alua_find_get_pg(pg->device_id_str, pg->device_id_len,
				  group_id);
	if (tmp_pg) {
		spin_unlock(&port_group_lock);
		kfree(pg);
		return tmp_pg;
	}

	list_add(&pg->node, &port_group_list);
	spin_unlock(&port_group_lock);

	return pg;
}

/*
 * alua_check_tpgs - Evaluate TPGS setting
 * @sdev: device to be checked
 *
 * Examine the TPGS setting of the sdev to find out if ALUA
 * is supported.
 */
static int alua_check_tpgs(struct scsi_device *sdev)
{
	int tpgs = TPGS_MODE_NONE;

	/*
	 * ALUA support for non-disk devices is fraught with
	 * difficulties, so disable it for now.
	 */
	if (sdev->type != TYPE_DISK) {
		sdev_printk(KERN_INFO, sdev,
			    "%s: disable for non-disk devices\n",
			    ALUA_DH_NAME);
		return tpgs;
	}

	tpgs = scsi_device_tpgs(sdev);
	switch (tpgs) {
	case TPGS_MODE_EXPLICIT|TPGS_MODE_IMPLICIT:
		sdev_printk(KERN_INFO, sdev,
			    "%s: supports implicit and explicit TPGS\n",
			    ALUA_DH_NAME);
		break;
	case TPGS_MODE_EXPLICIT:
		sdev_printk(KERN_INFO, sdev, "%s: supports explicit TPGS\n",
			    ALUA_DH_NAME);
		break;
	case TPGS_MODE_IMPLICIT:
		sdev_printk(KERN_INFO, sdev, "%s: supports implicit TPGS\n",
			    ALUA_DH_NAME);
		break;
	case TPGS_MODE_NONE:
		sdev_printk(KERN_INFO, sdev, "%s: not supported\n",
			    ALUA_DH_NAME);
		break;
	default:
		sdev_printk(KERN_INFO, sdev,
			    "%s: unsupported TPGS setting %d\n",
			    ALUA_DH_NAME, tpgs);
		tpgs = TPGS_MODE_NONE;
		break;
	}

	return tpgs;
}

/*
 * alua_check_vpd - Evaluate INQUIRY vpd page 0x83
 * @sdev: device to be checked
 *
 * Extract the relative target port and the target port group
 * descriptor from the list of identificators.
 */
static int alua_check_vpd(struct scsi_device *sdev, struct alua_dh_data *h,
			  int tpgs)
{
	int rel_port = -1, group_id;
	struct alua_port_group *pg, *old_pg = NULL;
	bool pg_updated = false;
	unsigned long flags;

	group_id = scsi_vpd_tpg_id(sdev, &rel_port);
	if (group_id < 0) {
		/*
		 * Internal error; TPGS supported but required
		 * VPD identification descriptors not present.
		 * Disable ALUA support
		 */
		sdev_printk(KERN_INFO, sdev,
			    "%s: No target port descriptors found\n",
			    ALUA_DH_NAME);
		return SCSI_DH_DEV_UNSUPP;
	}

	pg = alua_alloc_pg(sdev, group_id, tpgs);
	if (IS_ERR(pg)) {
		if (PTR_ERR(pg) == -ENOMEM)
			return SCSI_DH_NOMEM;
		return SCSI_DH_DEV_UNSUPP;
	}
	if (pg->device_id_len)
		sdev_printk(KERN_INFO, sdev,
			    "%s: device %s port group %x rel port %x\n",
			    ALUA_DH_NAME, pg->device_id_str,
			    group_id, rel_port);
	else
		sdev_printk(KERN_INFO, sdev,
			    "%s: port group %x rel port %x\n",
			    ALUA_DH_NAME, group_id, rel_port);

	/* Check for existing port group references */
	spin_lock(&h->pg_lock);
	old_pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
	if (old_pg != pg) {
		/* port group has changed. Update to new port group */
		if (h->pg) {
			spin_lock_irqsave(&old_pg->lock, flags);
			list_del_rcu(&h->node);
			spin_unlock_irqrestore(&old_pg->lock, flags);
		}
		rcu_assign_pointer(h->pg, pg);
		pg_updated = true;
	}

	spin_lock_irqsave(&pg->lock, flags);
	if (pg_updated)
		list_add_rcu(&h->node, &pg->dh_list);
	spin_unlock_irqrestore(&pg->lock, flags);

	alua_rtpg_queue(rcu_dereference_protected(h->pg,
						  lockdep_is_held(&h->pg_lock)),
			sdev, NULL, true);
	spin_unlock(&h->pg_lock);

	if (old_pg)
		kref_put(&old_pg->kref, release_port_group);

	return SCSI_DH_OK;
}

static char print_alua_state(unsigned char state)
{
	switch (state) {
	case SCSI_ACCESS_STATE_OPTIMAL:
		return 'A';
	case SCSI_ACCESS_STATE_ACTIVE:
		return 'N';
	case SCSI_ACCESS_STATE_STANDBY:
		return 'S';
	case SCSI_ACCESS_STATE_UNAVAILABLE:
		return 'U';
	case SCSI_ACCESS_STATE_LBA:
		return 'L';
	case SCSI_ACCESS_STATE_OFFLINE:
		return 'O';
	case SCSI_ACCESS_STATE_TRANSITIONING:
		return 'T';
	default:
		return 'X';
	}
}

static int alua_check_sense(struct scsi_device *sdev,
			    struct scsi_sense_hdr *sense_hdr)
{
	switch (sense_hdr->sense_key) {
	case NOT_READY:
		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) {
			/*
			 * LUN Not Accessible - ALUA state transition
			 */
			alua_check(sdev, false);
			return NEEDS_RETRY;
		}
		break;
	case UNIT_ATTENTION:
		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) {
			/*
			 * Power On, Reset, or Bus Device Reset.
			 * Might have obscured a state transition,
			 * so schedule a recheck.
			 */
			alua_check(sdev, true);
			return ADD_TO_MLQUEUE;
		}
		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x04)
			/*
			 * Device internal reset
			 */
			return ADD_TO_MLQUEUE;
		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x01)
			/*
			 * Mode Parameters Changed
			 */
			return ADD_TO_MLQUEUE;
		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
			/*
			 * ALUA state changed
			 */
			alua_check(sdev, true);
			return ADD_TO_MLQUEUE;
		}
		if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
			/*
			 * Implicit ALUA state transition failed
			 */
			alua_check(sdev, true);
			return ADD_TO_MLQUEUE;
		}
		if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x03)
			/*
			 * Inquiry data has changed
			 */
			return ADD_TO_MLQUEUE;
		if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x0e)
			/*
			 * REPORTED_LUNS_DATA_HAS_CHANGED is reported
			 * when switching controllers on targets like
			 * Intel Multi-Flex. We can just retry.
			 */
			return ADD_TO_MLQUEUE;
		break;
	}

	return SCSI_RETURN_NOT_HANDLED;
}

/*
 * alua_tur - Send a TEST UNIT READY
 * @sdev: device to which the TEST UNIT READY command should be send
 *
 * Send a TEST UNIT READY to @sdev to figure out the device state
 * Returns SCSI_DH_RETRY if the sense code is NOT READY/ALUA TRANSITIONING,
 * SCSI_DH_OK if no error occurred, and SCSI_DH_IO otherwise.
 */
static int alua_tur(struct scsi_device *sdev)
{
	struct scsi_sense_hdr sense_hdr;
	int retval;

	retval = scsi_test_unit_ready(sdev, ALUA_FAILOVER_TIMEOUT * HZ,
				      ALUA_FAILOVER_RETRIES, &sense_hdr);
	if (sense_hdr.sense_key == NOT_READY &&
	    sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a)
		return SCSI_DH_RETRY;
	else if (retval)
		return SCSI_DH_IO;
	else
		return SCSI_DH_OK;
}

/*
 * alua_rtpg - Evaluate REPORT TARGET GROUP STATES
 * @sdev: the device to be evaluated.
 *
 * Evaluate the Target Port Group State.
 * Returns SCSI_DH_DEV_OFFLINED if the path is
 * found to be unusable.
 */
static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg)
{
	struct scsi_sense_hdr sense_hdr;
	struct alua_port_group *tmp_pg;
	int len, k, off, bufflen = ALUA_RTPG_SIZE;
	unsigned char *desc, *buff;
	unsigned err, retval;
	unsigned int tpg_desc_tbl_off;
	unsigned char orig_transition_tmo;
	unsigned long flags;

	if (!pg->expiry) {
		unsigned long transition_tmo = ALUA_FAILOVER_TIMEOUT * HZ;

		if (pg->transition_tmo)
			transition_tmo = pg->transition_tmo * HZ;

		pg->expiry = round_jiffies_up(jiffies + transition_tmo);
	}

	buff = kzalloc(bufflen, GFP_KERNEL);
	if (!buff)
		return SCSI_DH_DEV_TEMP_BUSY;

 retry:
	err = 0;
	retval = submit_rtpg(sdev, buff, bufflen, &sense_hdr, pg->flags);

	if (retval) {
		/*
		 * Some (broken) implementations have a habit of returning
		 * an error during things like firmware update etc.
		 * But if the target only supports active/optimized there's
		 * not much we can do; it's not that we can switch paths
		 * or anything.
		 * So ignore any errors to avoid spurious failures during
		 * path failover.
		 */
		if ((pg->valid_states & ~TPGS_SUPPORT_OPTIMIZED) == 0) {
			sdev_printk(KERN_INFO, sdev,
				    "%s: ignoring rtpg result %d\n",
				    ALUA_DH_NAME, retval);
			kfree(buff);
			return SCSI_DH_OK;
		}
		if (!scsi_sense_valid(&sense_hdr)) {
			sdev_printk(KERN_INFO, sdev,
				    "%s: rtpg failed, result %d\n",
				    ALUA_DH_NAME, retval);
			kfree(buff);
			if (driver_byte(retval) == DRIVER_ERROR)
				return SCSI_DH_DEV_TEMP_BUSY;
			return SCSI_DH_IO;
		}

		/*
		 * submit_rtpg() has failed on existing arrays
		 * when requesting extended header info, and
		 * the array doesn't support extended headers,
		 * even though it shouldn't according to T10.
		 * The retry without rtpg_ext_hdr_req set
		 * handles this.
		 */
		if (!(pg->flags & ALUA_RTPG_EXT_HDR_UNSUPP) &&
		    sense_hdr.sense_key == ILLEGAL_REQUEST &&
		    sense_hdr.asc == 0x24 && sense_hdr.ascq == 0) {
			pg->flags |= ALUA_RTPG_EXT_HDR_UNSUPP;
			goto retry;
		}
		/*
		 * Retry on ALUA state transition or if any
		 * UNIT ATTENTION occurred.
		 */
		if (sense_hdr.sense_key == NOT_READY &&
		    sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a)
			err = SCSI_DH_RETRY;
		else if (sense_hdr.sense_key == UNIT_ATTENTION)
			err = SCSI_DH_RETRY;
		if (err == SCSI_DH_RETRY &&
		    pg->expiry != 0 && time_before(jiffies, pg->expiry)) {
			sdev_printk(KERN_ERR, sdev, "%s: rtpg retry\n",
				    ALUA_DH_NAME);
			scsi_print_sense_hdr(sdev, ALUA_DH_NAME, &sense_hdr);
			kfree(buff);
			return err;
		}
		sdev_printk(KERN_ERR, sdev, "%s: rtpg failed\n",
			    ALUA_DH_NAME);
		scsi_print_sense_hdr(sdev, ALUA_DH_NAME, &sense_hdr);
		kfree(buff);
		pg->expiry = 0;
		return SCSI_DH_IO;
	}

	len = get_unaligned_be32(&buff[0]) + 4;

	if (len > bufflen) {
		/* Resubmit with the correct length */
		kfree(buff);
		bufflen = len;
		buff = kmalloc(bufflen, GFP_KERNEL);
		if (!buff) {
			sdev_printk(KERN_WARNING, sdev,
				    "%s: kmalloc buffer failed\n",__func__);
			/* Temporary failure, bypass */
			pg->expiry = 0;
			return SCSI_DH_DEV_TEMP_BUSY;
		}
		goto retry;
	}

	orig_transition_tmo = pg->transition_tmo;
	if ((buff[4] & RTPG_FMT_MASK) == RTPG_FMT_EXT_HDR && buff[5] != 0)
		pg->transition_tmo = buff[5];
	else
		pg->transition_tmo = ALUA_FAILOVER_TIMEOUT;

	if (orig_transition_tmo != pg->transition_tmo) {
		sdev_printk(KERN_INFO, sdev,
			    "%s: transition timeout set to %d seconds\n",
			    ALUA_DH_NAME, pg->transition_tmo);
		pg->expiry = jiffies + pg->transition_tmo * HZ;
	}

	if ((buff[4] & RTPG_FMT_MASK) == RTPG_FMT_EXT_HDR)
		tpg_desc_tbl_off = 8;
	else
		tpg_desc_tbl_off = 4;

	for (k = tpg_desc_tbl_off, desc = buff + tpg_desc_tbl_off;
	     k < len;
	     k += off, desc += off) {
		u16 group_id = get_unaligned_be16(&desc[2]);

		spin_lock_irqsave(&port_group_lock, flags);
		tmp_pg = alua_find_get_pg(pg->device_id_str, pg->device_id_len,
					  group_id);
		spin_unlock_irqrestore(&port_group_lock, flags);
		if (tmp_pg) {
			if (spin_trylock_irqsave(&tmp_pg->lock, flags)) {
				if ((tmp_pg == pg) ||
				    !(tmp_pg->flags & ALUA_PG_RUNNING)) {
					struct alua_dh_data *h;

					tmp_pg->state = desc[0] & 0x0f;
					tmp_pg->pref = desc[0] >> 7;
					rcu_read_lock();
					list_for_each_entry_rcu(h,
						&tmp_pg->dh_list, node) {
						/* h->sdev should always be valid */
						BUG_ON(!h->sdev);
						h->sdev->access_state = desc[0];
					}
					rcu_read_unlock();
				}
				if (tmp_pg == pg)
					tmp_pg->valid_states = desc[1];
				spin_unlock_irqrestore(&tmp_pg->lock, flags);
			}
			kref_put(&tmp_pg->kref, release_port_group);
		}
		off = 8 + (desc[7] * 4);
	}

	spin_lock_irqsave(&pg->lock, flags);
	sdev_printk(KERN_INFO, sdev,
		    "%s: port group %02x state %c %s supports %c%c%c%c%c%c%c\n",
		    ALUA_DH_NAME, pg->group_id, print_alua_state(pg->state),
		    pg->pref ? "preferred" : "non-preferred",
		    pg->valid_states&TPGS_SUPPORT_TRANSITION?'T':'t',
		    pg->valid_states&TPGS_SUPPORT_OFFLINE?'O':'o',
		    pg->valid_states&TPGS_SUPPORT_LBA_DEPENDENT?'L':'l',
		    pg->valid_states&TPGS_SUPPORT_UNAVAILABLE?'U':'u',
		    pg->valid_states&TPGS_SUPPORT_STANDBY?'S':'s',
		    pg->valid_states&TPGS_SUPPORT_NONOPTIMIZED?'N':'n',
		    pg->valid_states&TPGS_SUPPORT_OPTIMIZED?'A':'a');

	switch (pg->state) {
	case SCSI_ACCESS_STATE_TRANSITIONING:
		if (time_before(jiffies, pg->expiry)) {
			/* State transition, retry */
			pg->interval = 2;
			err = SCSI_DH_RETRY;
		} else {
			struct alua_dh_data *h;

			/* Transitioning time exceeded, set port to standby */
			err = SCSI_DH_IO;
			pg->state = SCSI_ACCESS_STATE_STANDBY;
			pg->expiry = 0;
			rcu_read_lock();
			list_for_each_entry_rcu(h, &pg->dh_list, node) {
				BUG_ON(!h->sdev);
				h->sdev->access_state =
					(pg->state & SCSI_ACCESS_STATE_MASK);
				if (pg->pref)
					h->sdev->access_state |=
						SCSI_ACCESS_STATE_PREFERRED;
			}
			rcu_read_unlock();
		}
		break;
	case SCSI_ACCESS_STATE_OFFLINE:
		/* Path unusable */
		err = SCSI_DH_DEV_OFFLINED;
		pg->expiry = 0;
		break;
	default:
		/* Useable path if active */
		err = SCSI_DH_OK;
		pg->expiry = 0;
		break;
	}
	spin_unlock_irqrestore(&pg->lock, flags);
	kfree(buff);
	return err;
}

/*
 * alua_stpg - Issue a SET TARGET PORT GROUP command
 *
 * Issue a SET TARGET PORT GROUP command and evaluate the
 * response. Returns SCSI_DH_RETRY per default to trigger
 * a re-evaluation of the target group state or SCSI_DH_OK
 * if no further action needs to be taken.
 */
static unsigned alua_stpg(struct scsi_device *sdev, struct alua_port_group *pg)
{
	int retval;
	struct scsi_sense_hdr sense_hdr;

	if (!(pg->tpgs & TPGS_MODE_EXPLICIT)) {
		/* Only implicit ALUA supported, retry */
		return SCSI_DH_RETRY;
	}
	switch (pg->state) {
	case SCSI_ACCESS_STATE_OPTIMAL:
		return SCSI_DH_OK;
	case SCSI_ACCESS_STATE_ACTIVE:
		if ((pg->flags & ALUA_OPTIMIZE_STPG) &&
		    !pg->pref &&
		    (pg->tpgs & TPGS_MODE_IMPLICIT))
			return SCSI_DH_OK;
		break;
	case SCSI_ACCESS_STATE_STANDBY:
	case SCSI_ACCESS_STATE_UNAVAILABLE:
		break;
	case SCSI_ACCESS_STATE_OFFLINE:
		return SCSI_DH_IO;
	case SCSI_ACCESS_STATE_TRANSITIONING:
		break;
	default:
		sdev_printk(KERN_INFO, sdev,
			    "%s: stpg failed, unhandled TPGS state %d",
			    ALUA_DH_NAME, pg->state);
		return SCSI_DH_NOSYS;
	}
	retval = submit_stpg(sdev, pg->group_id, &sense_hdr);

	if (retval) {
		if (!scsi_sense_valid(&sense_hdr)) {
			sdev_printk(KERN_INFO, sdev,
				    "%s: stpg failed, result %d",
				    ALUA_DH_NAME, retval);
			if (driver_byte(retval) == DRIVER_ERROR)
				return SCSI_DH_DEV_TEMP_BUSY;
		} else {
			sdev_printk(KERN_INFO, sdev, "%s: stpg failed\n",
				    ALUA_DH_NAME);
			scsi_print_sense_hdr(sdev, ALUA_DH_NAME, &sense_hdr);
		}
	}
	/* Retry RTPG */
	return SCSI_DH_RETRY;
}

static void alua_rtpg_work(struct work_struct *work)
{
	struct alua_port_group *pg =
		container_of(work, struct alua_port_group, rtpg_work.work);
	struct scsi_device *sdev;
	LIST_HEAD(qdata_list);
	int err = SCSI_DH_OK;
	struct alua_queue_data *qdata, *tmp;
	unsigned long flags;

	spin_lock_irqsave(&pg->lock, flags);
	sdev = pg->rtpg_sdev;
	if (!sdev) {
		WARN_ON(pg->flags & ALUA_PG_RUN_RTPG);
		WARN_ON(pg->flags & ALUA_PG_RUN_STPG);
		spin_unlock_irqrestore(&pg->lock, flags);
		kref_put(&pg->kref, release_port_group);
		return;
	}
	pg->flags |= ALUA_PG_RUNNING;
	if (pg->flags & ALUA_PG_RUN_RTPG) {
		int state = pg->state;

		pg->flags &= ~ALUA_PG_RUN_RTPG;
		spin_unlock_irqrestore(&pg->lock, flags);
		if (state == SCSI_ACCESS_STATE_TRANSITIONING) {
			if (alua_tur(sdev) == SCSI_DH_RETRY) {
				spin_lock_irqsave(&pg->lock, flags);
				pg->flags &= ~ALUA_PG_RUNNING;
				pg->flags |= ALUA_PG_RUN_RTPG;
				spin_unlock_irqrestore(&pg->lock, flags);
				queue_delayed_work(kaluad_wq, &pg->rtpg_work,
						   pg->interval * HZ);
				return;
			}
			/* Send RTPG on failure or if TUR indicates SUCCESS */
		}
		err = alua_rtpg(sdev, pg);
		spin_lock_irqsave(&pg->lock, flags);
		if (err == SCSI_DH_RETRY || pg->flags & ALUA_PG_RUN_RTPG) {
			pg->flags &= ~ALUA_PG_RUNNING;
			pg->flags |= ALUA_PG_RUN_RTPG;
			spin_unlock_irqrestore(&pg->lock, flags);
			queue_delayed_work(kaluad_wq, &pg->rtpg_work,
					   pg->interval * HZ);
			return;
		}
		if (err != SCSI_DH_OK)
			pg->flags &= ~ALUA_PG_RUN_STPG;
	}
	if (pg->flags & ALUA_PG_RUN_STPG) {
		pg->flags &= ~ALUA_PG_RUN_STPG;
		spin_unlock_irqrestore(&pg->lock, flags);
		err = alua_stpg(sdev, pg);
		spin_lock_irqsave(&pg->lock, flags);
		if (err == SCSI_DH_RETRY || pg->flags & ALUA_PG_RUN_RTPG) {
			pg->flags |= ALUA_PG_RUN_RTPG;
			pg->interval = 0;
			pg->flags &= ~ALUA_PG_RUNNING;
			spin_unlock_irqrestore(&pg->lock, flags);
			queue_delayed_work(kaluad_wq, &pg->rtpg_work,
					   pg->interval * HZ);
			return;
		}
	}

	list_splice_init(&pg->rtpg_list, &qdata_list);
	pg->rtpg_sdev = NULL;
	spin_unlock_irqrestore(&pg->lock, flags);

	list_for_each_entry_safe(qdata, tmp, &qdata_list, entry) {
		list_del(&qdata->entry);
		if (qdata->callback_fn)
			qdata->callback_fn(qdata->callback_data, err);
		kfree(qdata);
	}
	spin_lock_irqsave(&pg->lock, flags);
	pg->flags &= ~ALUA_PG_RUNNING;
	spin_unlock_irqrestore(&pg->lock, flags);
	scsi_device_put(sdev);
	kref_put(&pg->kref, release_port_group);
}

/**
 * alua_rtpg_queue() - cause RTPG to be submitted asynchronously
 * @pg: ALUA port group associated with @sdev.
 * @sdev: SCSI device for which to submit an RTPG.
 * @qdata: Information about the callback to invoke after the RTPG.
 * @force: Whether or not to submit an RTPG if a work item that will submit an
 *         RTPG already has been scheduled.
 *
 * Returns true if and only if alua_rtpg_work() will be called asynchronously.
 * That function is responsible for calling @qdata->fn().
 */
static bool alua_rtpg_queue(struct alua_port_group *pg,
			    struct scsi_device *sdev,
			    struct alua_queue_data *qdata, bool force)
{
	int start_queue = 0;
	unsigned long flags;
	if (WARN_ON_ONCE(!pg) || scsi_device_get(sdev))
		return false;

	spin_lock_irqsave(&pg->lock, flags);
	if (qdata) {
		list_add_tail(&qdata->entry, &pg->rtpg_list);
		pg->flags |= ALUA_PG_RUN_STPG;
		force = true;
	}
	if (pg->rtpg_sdev == NULL) {
		pg->interval = 0;
		pg->flags |= ALUA_PG_RUN_RTPG;
		kref_get(&pg->kref);
		pg->rtpg_sdev = sdev;
		start_queue = 1;
	} else if (!(pg->flags & ALUA_PG_RUN_RTPG) && force) {
		pg->flags |= ALUA_PG_RUN_RTPG;
		/* Do not queue if the worker is already running */
		if (!(pg->flags & ALUA_PG_RUNNING)) {
			kref_get(&pg->kref);
			start_queue = 1;
		}
	}

	spin_unlock_irqrestore(&pg->lock, flags);

	if (start_queue) {
		if (queue_delayed_work(kaluad_wq, &pg->rtpg_work,
				msecs_to_jiffies(ALUA_RTPG_DELAY_MSECS)))
			sdev = NULL;
		else
			kref_put(&pg->kref, release_port_group);
	}
	if (sdev)
		scsi_device_put(sdev);

	return true;
}

/*
 * alua_initialize - Initialize ALUA state
 * @sdev: the device to be initialized
 *
 * For the prep_fn to work correctly we have
 * to initialize the ALUA state for the device.
 */
static int alua_initialize(struct scsi_device *sdev, struct alua_dh_data *h)
{
	int err = SCSI_DH_DEV_UNSUPP, tpgs;

	mutex_lock(&h->init_mutex);
	tpgs = alua_check_tpgs(sdev);
	if (tpgs != TPGS_MODE_NONE)
		err = alua_check_vpd(sdev, h, tpgs);
	h->init_error = err;
	mutex_unlock(&h->init_mutex);
	return err;
}
/*
 * alua_set_params - set/unset the optimize flag
 * @sdev: device on the path to be activated
 * params - parameters in the following format
 *      "no_of_params\0param1\0param2\0param3\0...\0"
 * For example, to set the flag pass the following parameters
 * from multipath.conf
 *     hardware_handler        "2 alua 1"
 */
static int alua_set_params(struct scsi_device *sdev, const char *params)
{
	struct alua_dh_data *h = sdev->handler_data;
	struct alua_port_group *pg = NULL;
	unsigned int optimize = 0, argc;
	const char *p = params;
	int result = SCSI_DH_OK;
	unsigned long flags;

	if ((sscanf(params, "%u", &argc) != 1) || (argc != 1))
		return -EINVAL;

	while (*p++)
		;
	if ((sscanf(p, "%u", &optimize) != 1) || (optimize > 1))
		return -EINVAL;

	rcu_read_lock();
	pg = rcu_dereference(h->pg);
	if (!pg) {
		rcu_read_unlock();
		return -ENXIO;
	}
	spin_lock_irqsave(&pg->lock, flags);
	if (optimize)
		pg->flags |= ALUA_OPTIMIZE_STPG;
	else
		pg->flags &= ~ALUA_OPTIMIZE_STPG;
	spin_unlock_irqrestore(&pg->lock, flags);
	rcu_read_unlock();

	return result;
}

/*
 * alua_activate - activate a path
 * @sdev: device on the path to be activated
 *
 * We're currently switching the port group to be activated only and
 * let the array figure out the rest.
 * There may be other arrays which require us to switch all port groups
 * based on a certain policy. But until we actually encounter them it
 * should be okay.
 */
static int alua_activate(struct scsi_device *sdev,
			activate_complete fn, void *data)
{
	struct alua_dh_data *h = sdev->handler_data;
	int err = SCSI_DH_OK;
	struct alua_queue_data *qdata;
	struct alua_port_group *pg;

	qdata = kzalloc(sizeof(*qdata), GFP_KERNEL);
	if (!qdata) {
		err = SCSI_DH_RES_TEMP_UNAVAIL;
		goto out;
	}
	qdata->callback_fn = fn;
	qdata->callback_data = data;

	mutex_lock(&h->init_mutex);
	rcu_read_lock();
	pg = rcu_dereference(h->pg);
	if (!pg || !kref_get_unless_zero(&pg->kref)) {
		rcu_read_unlock();
		kfree(qdata);
		err = h->init_error;
		mutex_unlock(&h->init_mutex);
		goto out;
	}
	rcu_read_unlock();
	mutex_unlock(&h->init_mutex);

	if (alua_rtpg_queue(pg, sdev, qdata, true))
		fn = NULL;
	else
		err = SCSI_DH_DEV_OFFLINED;
	kref_put(&pg->kref, release_port_group);
out:
	if (fn)
		fn(data, err);
	return 0;
}

/*
 * alua_check - check path status
 * @sdev: device on the path to be checked
 *
 * Check the device status
 */
static void alua_check(struct scsi_device *sdev, bool force)
{
	struct alua_dh_data *h = sdev->handler_data;
	struct alua_port_group *pg;

	rcu_read_lock();
	pg = rcu_dereference(h->pg);
	if (!pg || !kref_get_unless_zero(&pg->kref)) {
		rcu_read_unlock();
		return;
	}
	rcu_read_unlock();

	alua_rtpg_queue(pg, sdev, NULL, force);
	kref_put(&pg->kref, release_port_group);
}

/*
 * alua_prep_fn - request callback
 *
 * Fail I/O to all paths not in state
 * active/optimized or active/non-optimized.
 */
static blk_status_t alua_prep_fn(struct scsi_device *sdev, struct request *req)
{
	struct alua_dh_data *h = sdev->handler_data;
	struct alua_port_group *pg;
	unsigned char state = SCSI_ACCESS_STATE_OPTIMAL;

	rcu_read_lock();
	pg = rcu_dereference(h->pg);
	if (pg)
		state = pg->state;
	rcu_read_unlock();

	switch (state) {
	case SCSI_ACCESS_STATE_OPTIMAL:
	case SCSI_ACCESS_STATE_ACTIVE:
	case SCSI_ACCESS_STATE_LBA:
		return BLK_STS_OK;
	case SCSI_ACCESS_STATE_TRANSITIONING:
		return BLK_STS_RESOURCE;
	default:
		req->rq_flags |= RQF_QUIET;
		return BLK_STS_IOERR;
	}
}

static void alua_rescan(struct scsi_device *sdev)
{
	struct alua_dh_data *h = sdev->handler_data;

	alua_initialize(sdev, h);
}

/*
 * alua_bus_attach - Attach device handler
 * @sdev: device to be attached to
 */
static int alua_bus_attach(struct scsi_device *sdev)
{
	struct alua_dh_data *h;
	int err;

	h = kzalloc(sizeof(*h) , GFP_KERNEL);
	if (!h)
		return SCSI_DH_NOMEM;
	spin_lock_init(&h->pg_lock);
	rcu_assign_pointer(h->pg, NULL);
	h->init_error = SCSI_DH_OK;
	h->sdev = sdev;
	INIT_LIST_HEAD(&h->node);

	mutex_init(&h->init_mutex);
	err = alua_initialize(sdev, h);
	if (err != SCSI_DH_OK && err != SCSI_DH_DEV_OFFLINED)
		goto failed;

	sdev->handler_data = h;
	return SCSI_DH_OK;
failed:
	kfree(h);
	return err;
}

/*
 * alua_bus_detach - Detach device handler
 * @sdev: device to be detached from
 */
static void alua_bus_detach(struct scsi_device *sdev)
{
	struct alua_dh_data *h = sdev->handler_data;
	struct alua_port_group *pg;

	spin_lock(&h->pg_lock);
	pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock));
	rcu_assign_pointer(h->pg, NULL);
	h->sdev = NULL;
	spin_unlock(&h->pg_lock);
	if (pg) {
		spin_lock_irq(&pg->lock);
		list_del_rcu(&h->node);
		spin_unlock_irq(&pg->lock);
		kref_put(&pg->kref, release_port_group);
	}
	sdev->handler_data = NULL;
	kfree(h);
}

static struct scsi_device_handler alua_dh = {
	.name = ALUA_DH_NAME,
	.module = THIS_MODULE,
	.attach = alua_bus_attach,
	.detach = alua_bus_detach,
	.prep_fn = alua_prep_fn,
	.check_sense = alua_check_sense,
	.activate = alua_activate,
	.rescan = alua_rescan,
	.set_params = alua_set_params,
};

static int __init alua_init(void)
{
	int r;

	kaluad_wq = alloc_workqueue("kaluad", WQ_MEM_RECLAIM, 0);
	if (!kaluad_wq) {
		/* Temporary failure, bypass */
		return SCSI_DH_DEV_TEMP_BUSY;
	}

	r = scsi_register_device_handler(&alua_dh);
	if (r != 0) {
		printk(KERN_ERR "%s: Failed to register scsi device handler",
			ALUA_DH_NAME);
		destroy_workqueue(kaluad_wq);
	}
	return r;
}

static void __exit alua_exit(void)
{
	scsi_unregister_device_handler(&alua_dh);
	destroy_workqueue(kaluad_wq);
}

module_init(alua_init);
module_exit(alua_exit);

MODULE_DESCRIPTION("DM Multipath ALUA support");
MODULE_AUTHOR("Hannes Reinecke <hare@suse.de>");
MODULE_LICENSE("GPL");
MODULE_VERSION(ALUA_DH_VER);