blob: e901b9879e7e70ce917af7bd740a41c74a651420 [file] [log] [blame]
menuconfig POWER_SUPPLY
bool "Power supply class support"
help
Say Y here to enable power supply class support. This allows
power supply (batteries, AC, USB) monitoring by userspace
via sysfs and uevent (if available) and/or APM kernel interface
(if selected below).
if POWER_SUPPLY
config POWER_SUPPLY_DEBUG
bool "Power supply debug"
help
Say Y here to enable debugging messages for power supply class
and drivers.
config PDA_POWER
tristate "Generic PDA/phone power driver"
depends on !S390
help
Say Y here to enable generic power driver for PDAs and phones with
one or two external power supplies (AC/USB) connected to main and
backup batteries, and optional builtin charger.
config APM_POWER
tristate "APM emulation for class batteries"
depends on APM_EMULATION
help
Say Y here to enable support APM status emulation using
battery class devices.
config GENERIC_ADC_BATTERY
tristate "Generic battery support using IIO"
depends on IIO
help
Say Y here to enable support for the generic battery driver
which uses IIO framework to read adc.
config MAX8925_POWER
tristate "MAX8925 battery charger support"
depends on MFD_MAX8925
help
Say Y here to enable support for the battery charger in the Maxim
MAX8925 PMIC.
config WM831X_BACKUP
tristate "WM831X backup battery charger support"
depends on MFD_WM831X
help
Say Y here to enable support for the backup battery charger
in the Wolfson Microelectronics WM831x PMICs.
config WM831X_POWER
tristate "WM831X PMU support"
depends on MFD_WM831X
help
Say Y here to enable support for the power management unit
provided by Wolfson Microelectronics WM831x PMICs.
config WM8350_POWER
tristate "WM8350 PMU support"
depends on MFD_WM8350
help
Say Y here to enable support for the power management unit
provided by the Wolfson Microelectronics WM8350 PMIC.
config TEST_POWER
tristate "Test power driver"
help
This driver is used for testing. It's safe to say M here.
config BATTERY_88PM860X
tristate "Marvell 88PM860x battery driver"
depends on MFD_88PM860X
help
Say Y here to enable battery monitor for Marvell 88PM860x chip.
config CHARGER_ADP5061
tristate "ADP5061 battery charger driver"
depends on I2C
select REGMAP_I2C
help
Say Y here to enable support for the ADP5061 standalone battery
charger.
This driver can be built as a module. If so, the module will be
called adp5061.
config BATTERY_ACT8945A
tristate "Active-semi ACT8945A charger driver"
depends on MFD_ACT8945A || COMPILE_TEST
help
Say Y here to enable support for power supply provided by
Active-semi ActivePath ACT8945A charger.
config BATTERY_CPCAP
tristate "Motorola CPCAP PMIC battery driver"
depends on MFD_CPCAP && IIO
default MFD_CPCAP
help
Say Y here to enable support for battery on Motorola
phones and tablets such as droid 4.
config BATTERY_DS2760
tristate "DS2760 battery driver (HP iPAQ & others)"
depends on W1
help
Say Y here to enable support for batteries with ds2760 chip.
config BATTERY_DS2780
tristate "DS2780 battery driver"
depends on HAS_IOMEM
select W1
select W1_SLAVE_DS2780
help
Say Y here to enable support for batteries with ds2780 chip.
config BATTERY_DS2781
tristate "DS2781 battery driver"
depends on HAS_IOMEM
select W1
select W1_SLAVE_DS2781
help
If you enable this you will have the DS2781 battery driver support.
The battery monitor chip is used in many batteries/devices
as the one who is responsible for charging/discharging/monitoring
Li+ batteries.
If you are unsure, say N.
config BATTERY_DS2782
tristate "DS2782/DS2786 standalone gas-gauge"
depends on I2C
help
Say Y here to enable support for the DS2782/DS2786 standalone battery
gas-gauge.
config BATTERY_LEGO_EV3
tristate "LEGO MINDSTORMS EV3 battery"
depends on OF && IIO && GPIOLIB
help
Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
config BATTERY_PMU
tristate "Apple PMU battery"
depends on PPC32 && ADB_PMU
help
Say Y here to expose battery information on Apple machines
through the generic battery class.
config BATTERY_OLPC
tristate "One Laptop Per Child battery"
depends on X86_32 && OLPC
help
Say Y to enable support for the battery on the OLPC laptop.
config BATTERY_TOSA
tristate "Sharp SL-6000 (tosa) battery"
depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
help
Say Y to enable support for the battery on the Sharp Zaurus
SL-6000 (tosa) models.
config BATTERY_COLLIE
tristate "Sharp SL-5500 (collie) battery"
depends on SA1100_COLLIE && MCP_UCB1200
help
Say Y to enable support for the battery on the Sharp Zaurus
SL-5500 (collie) models.
config BATTERY_IPAQ_MICRO
tristate "iPAQ Atmel Micro ASIC battery driver"
depends on MFD_IPAQ_MICRO
help
Choose this option if you want to monitor battery status on
Compaq/HP iPAQ h3100 and h3600.
config BATTERY_WM97XX
bool "WM97xx generic battery driver"
depends on TOUCHSCREEN_WM97XX=y
help
Say Y to enable support for battery measured by WM97xx aux port.
config BATTERY_SBS
tristate "SBS Compliant gas gauge"
depends on I2C
help
Say Y to include support for SBS battery driver for SBS-compliant
gas gauges.
config CHARGER_SBS
tristate "SBS Compliant charger"
depends on I2C
help
Say Y to include support for SBS compliant battery chargers.
config MANAGER_SBS
tristate "Smart Battery System Manager"
depends on I2C && I2C_MUX && GPIOLIB
select I2C_SMBUS
help
Say Y here to include support for Smart Battery System Manager
ICs. The driver reports online and charging status via sysfs.
It presents itself also as I2C mux which allows to bind
smart battery driver to its ports.
Supported is for example LTC1760.
This driver can also be built as a module. If so, the module will be
called sbs-manager.
config BATTERY_BQ27XXX
tristate "BQ27xxx battery driver"
help
Say Y here to enable support for batteries with BQ27xxx chips.
config BATTERY_BQ27XXX_I2C
tristate "BQ27xxx I2C support"
depends on BATTERY_BQ27XXX
depends on I2C
default y
help
Say Y here to enable support for batteries with BQ27xxx chips
connected over an I2C bus.
config BATTERY_BQ27XXX_HDQ
tristate "BQ27xxx HDQ support"
depends on BATTERY_BQ27XXX
depends on W1
default y
help
Say Y here to enable support for batteries with BQ27xxx chips
connected over an HDQ bus.
config BATTERY_BQ27XXX_DT_UPDATES_NVM
bool "BQ27xxx support for update of NVM/flash data memory"
depends on BATTERY_BQ27XXX_I2C
help
Say Y here to enable devicetree monitored-battery config to update
NVM/flash data memory. Only enable this option for devices with a
fuel gauge mounted on the circuit board, and a battery that cannot
easily be replaced with one of a different type. Not for
general-purpose kernels, as this can cause misconfiguration of a
smart battery with embedded NVM/flash.
config BATTERY_DA9030
tristate "DA9030 battery driver"
depends on PMIC_DA903X
help
Say Y here to enable support for batteries charger integrated into
DA9030 PMIC.
config BATTERY_DA9052
tristate "Dialog DA9052 Battery"
depends on PMIC_DA9052
help
Say Y here to enable support for batteries charger integrated into
DA9052 PMIC.
config CHARGER_DA9150
tristate "Dialog Semiconductor DA9150 Charger support"
depends on MFD_DA9150
depends on DA9150_GPADC
depends on IIO
help
Say Y here to enable support for charger unit of the DA9150
Integrated Charger & Fuel-Gauge IC.
This driver can also be built as a module. If so, the module will be
called da9150-charger.
config BATTERY_DA9150
tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
depends on MFD_DA9150
help
Say Y here to enable support for the Fuel-Gauge unit of the DA9150
Integrated Charger & Fuel-Gauge IC
This driver can also be built as a module. If so, the module will be
called da9150-fg.
config CHARGER_AXP20X
tristate "X-Powers AXP20X and AXP22X AC power supply driver"
depends on MFD_AXP20X
depends on AXP20X_ADC
depends on IIO
help
Say Y here to enable support for X-Powers AXP20X and AXP22X PMICs' AC
power supply.
This driver can also be built as a module. If so, the module will be
called axp20x_ac_power.
config BATTERY_AXP20X
tristate "X-Powers AXP20X battery driver"
depends on MFD_AXP20X
depends on AXP20X_ADC
depends on IIO
help
Say Y here to enable support for X-Powers AXP20X PMICs' battery power
supply.
This driver can also be built as a module. If so, the module will be
called axp20x_battery.
config AXP20X_POWER
tristate "AXP20x power supply driver"
depends on MFD_AXP20X
depends on IIO
help
This driver provides support for the power supply features of
AXP20x PMIC.
config AXP288_CHARGER
tristate "X-Powers AXP288 Charger"
depends on MFD_AXP20X && EXTCON_AXP288
help
Say yes here to have support X-Power AXP288 power management IC (PMIC)
integrated charger.
config AXP288_FUEL_GAUGE
tristate "X-Powers AXP288 Fuel Gauge"
depends on MFD_AXP20X && IIO
help
Say yes here to have support for X-Power power management IC (PMIC)
Fuel Gauge. The device provides battery statistics and status
monitoring as well as alerts for battery over/under voltage and
over/under temperature.
config BATTERY_MAX17040
tristate "Maxim MAX17040 Fuel Gauge"
depends on I2C
help
MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
in handheld and portable equipment. The MAX17040 is configured
to operate with a single lithium cell
config BATTERY_MAX17042
tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
depends on I2C
select REGMAP_I2C
help
MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
in handheld and portable equipment. The MAX17042 is configured
to operate with a single lithium cell. MAX8997 and MAX8966 are
multi-function devices that include fuel gauages that are compatible
with MAX17042. This driver also supports max17047/50 chips which are
improved version of max17042.
config BATTERY_MAX1721X
tristate "MAX17211/MAX17215 standalone gas-gauge"
depends on W1
select REGMAP_W1
help
MAX1721x is fuel-gauge systems for lithium-ion (Li+) batteries
in handheld and portable equipment. MAX17211 used with single cell
battery. MAX17215 designed for muticell battery. Both them have
OneWire (W1) host interface.
Say Y here to enable support for the MAX17211/MAX17215 standalone
battery gas-gauge.
config BATTERY_Z2
tristate "Z2 battery driver"
depends on I2C && MACH_ZIPIT2
help
Say Y to include support for the battery on the Zipit Z2.
config BATTERY_S3C_ADC
tristate "Battery driver for Samsung ADC based monitoring"
depends on S3C_ADC
help
Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
config BATTERY_TWL4030_MADC
tristate "TWL4030 MADC battery driver"
depends on TWL4030_MADC
help
Say Y here to enable this dumb driver for batteries managed
through the TWL4030 MADC.
config CHARGER_88PM860X
tristate "Marvell 88PM860x Charger driver"
depends on MFD_88PM860X && BATTERY_88PM860X
help
Say Y here to enable charger for Marvell 88PM860x chip.
config CHARGER_PCF50633
tristate "NXP PCF50633 MBC"
depends on MFD_PCF50633
help
Say Y to include support for NXP PCF50633 Main Battery Charger.
config BATTERY_JZ4740
tristate "Ingenic JZ4740 battery"
depends on MACH_JZ4740
depends on MFD_JZ4740_ADC
help
Say Y to enable support for the battery on Ingenic JZ4740 based
boards.
This driver can be build as a module. If so, the module will be
called jz4740-battery.
config BATTERY_RX51
tristate "Nokia RX-51 (N900) battery driver"
depends on TWL4030_MADC
help
Say Y here to enable support for battery information on Nokia
RX-51, also known as N900 tablet.
config CHARGER_CPCAP
tristate "CPCAP PMIC Charger Driver"
depends on MFD_CPCAP && IIO
depends on OMAP_USB2 || (!OMAP_USB2 && COMPILE_TEST)
default MFD_CPCAP
help
Say Y to enable support for CPCAP PMIC charger driver for Motorola
mobile devices such as Droid 4.
config CHARGER_ISP1704
tristate "ISP1704 USB Charger Detection"
depends on USB_PHY
depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
help
Say Y to enable support for USB Charger Detection with
ISP1707/ISP1704 USB transceivers.
config CHARGER_MAX8903
tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
help
Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
The driver supports controlling charger-enable and current-limit
pins based on the status of charger connections with interrupt
handlers.
config CHARGER_TWL4030
tristate "OMAP TWL4030 BCI charger driver"
depends on IIO && TWL4030_CORE
help
Say Y here to enable support for TWL4030 Battery Charge Interface.
config CHARGER_LP8727
tristate "TI/National Semiconductor LP8727 charger driver"
depends on I2C
help
Say Y here to enable support for LP8727 Charger Driver.
config CHARGER_LP8788
tristate "TI LP8788 charger driver"
depends on MFD_LP8788
depends on LP8788_ADC
depends on IIO
help
Say Y to enable support for the LP8788 linear charger.
config CHARGER_GPIO
tristate "GPIO charger"
depends on GPIOLIB || COMPILE_TEST
help
Say Y to include support for chargers which report their online status
through a GPIO pin.
This driver can be build as a module. If so, the module will be
called gpio-charger.
config CHARGER_MANAGER
bool "Battery charger manager for multiple chargers"
depends on REGULATOR
select EXTCON
help
Say Y to enable charger-manager support, which allows multiple
chargers attached to a battery and multiple batteries attached to a
system. The charger-manager also can monitor charging status in
runtime and in suspend-to-RAM by waking up the system periodically
with help of suspend_again support.
config CHARGER_LTC3651
tristate "LTC3651 charger"
depends on GPIOLIB
help
Say Y to include support for the LTC3651 battery charger which reports
its status via GPIO lines.
config CHARGER_MAX14577
tristate "Maxim MAX14577/77836 battery charger driver"
depends on MFD_MAX14577
help
Say Y to enable support for the battery charger control sysfs and
platform data of MAX14577/77836 MUICs.
config CHARGER_DETECTOR_MAX14656
tristate "Maxim MAX14656 USB charger detector"
depends on I2C
depends on OF
help
Say Y to enable support for the Maxim MAX14656 USB charger detector.
The device is compliant with the USB Battery Charging Specification
Revision 1.2 and can be found e.g. in Kindle 4/5th generation
readers and certain LG devices.
config CHARGER_MAX77693
tristate "Maxim MAX77693 battery charger driver"
depends on MFD_MAX77693
help
Say Y to enable support for the Maxim MAX77693 battery charger.
config CHARGER_MAX8997
tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
depends on MFD_MAX8997 && REGULATOR_MAX8997
help
Say Y to enable support for the battery charger control sysfs and
platform data of MAX8997/LP3974 PMICs.
config CHARGER_MAX8998
tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
depends on MFD_MAX8998 && REGULATOR_MAX8998
help
Say Y to enable support for the battery charger control sysfs and
platform data of MAX8998/LP3974 PMICs.
config CHARGER_QCOM_SMBB
tristate "Qualcomm Switch-Mode Battery Charger and Boost"
depends on MFD_SPMI_PMIC || COMPILE_TEST
depends on OF
depends on EXTCON
depends on REGULATOR
help
Say Y to include support for the Switch-Mode Battery Charger and
Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
is an integrated, single-cell lithium-ion battery charger. DT
configuration is required for loading, see the devicetree
documentation for more detail. The base name for this driver is
'pm8941_charger'.
config CHARGER_BQ2415X
tristate "TI BQ2415x battery charger driver"
depends on I2C
help
Say Y to enable support for the TI BQ2415x battery charger
PMICs.
You'll need this driver to charge batteries on e.g. Nokia
RX-51/N900.
config CHARGER_BQ24190
tristate "TI BQ24190 battery charger driver"
depends on I2C
depends on EXTCON
depends on GPIOLIB || COMPILE_TEST
help
Say Y to enable support for the TI BQ24190 battery charger.
config CHARGER_BQ24257
tristate "TI BQ24250/24251/24257 battery charger driver"
depends on I2C
depends on GPIOLIB || COMPILE_TEST
depends on REGMAP_I2C
help
Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
chargers.
config CHARGER_BQ24735
tristate "TI BQ24735 battery charger support"
depends on I2C
depends on GPIOLIB || COMPILE_TEST
help
Say Y to enable support for the TI BQ24735 battery charger.
config CHARGER_BQ25890
tristate "TI BQ25890 battery charger driver"
depends on I2C
depends on GPIOLIB || COMPILE_TEST
select REGMAP_I2C
help
Say Y to enable support for the TI BQ25890 battery charger.
config CHARGER_SMB347
tristate "Summit Microelectronics SMB347 Battery Charger"
depends on I2C
select REGMAP_I2C
help
Say Y to include support for Summit Microelectronics SMB347
Battery Charger.
config CHARGER_TPS65090
tristate "TPS65090 battery charger driver"
depends on MFD_TPS65090
help
Say Y here to enable support for battery charging with TPS65090
PMIC chips.
config CHARGER_TPS65217
tristate "TPS65217 battery charger driver"
depends on MFD_TPS65217
help
Say Y here to enable support for battery charging with TPS65217
PMIC chips.
config BATTERY_GAUGE_LTC2941
tristate "LTC2941/LTC2943 Battery Gauge Driver"
depends on I2C
help
Say Y here to include support for LTC2941 and LTC2943 Battery
Gauge IC. The driver reports the charge count continuously, and
measures the voltage and temperature every 10 seconds.
config AB8500_BM
bool "AB8500 Battery Management Driver"
depends on AB8500_CORE && AB8500_GPADC
help
Say Y to include support for AB8500 battery management.
config BATTERY_GOLDFISH
tristate "Goldfish battery driver"
depends on GOLDFISH || COMPILE_TEST
depends on HAS_IOMEM
help
Say Y to enable support for the battery and AC power in the
Goldfish emulator.
config BATTERY_RT5033
tristate "RT5033 fuel gauge support"
depends on MFD_RT5033
help
This adds support for battery fuel gauge in Richtek RT5033 PMIC.
The fuelgauge calculates and determines the battery state of charge
according to battery open circuit voltage.
config CHARGER_RT9455
tristate "Richtek RT9455 battery charger driver"
depends on I2C
depends on GPIOLIB || COMPILE_TEST
select REGMAP_I2C
help
Say Y to enable support for Richtek RT9455 battery charger.
config CHARGER_CROS_USBPD
tristate "ChromeOS EC based USBPD charger"
depends on MFD_CROS_EC
default n
help
Say Y here to enable ChromeOS EC based USBPD charger
driver. This driver gets various bits of information about
what is connected to USB PD ports from the EC and converts
that into power_supply properties.
config CHARGER_SC2731
tristate "Spreadtrum SC2731 charger driver"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
help
Say Y here to enable support for battery charging with SC2731
PMIC chips.
config FUEL_GAUGE_SC27XX
tristate "Spreadtrum SC27XX fuel gauge driver"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
depends on IIO
help
Say Y here to enable support for fuel gauge with SC27XX
PMIC chips.
endif # POWER_SUPPLY