/*
 * wm8994-core.c  --  Device access for Wolfson WM8994
 *
 * Copyright 2009 Wolfson Microelectronics PLC.
 *
 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/mfd/core.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/machine.h>

#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/pdata.h>
#include <linux/mfd/wm8994/registers.h>

#include "wm8994.h"

static const struct mfd_cell wm8994_regulator_devs[] = {
	{
		.name = "wm8994-ldo",
		.id = 0,
		.pm_runtime_no_callbacks = true,
	},
	{
		.name = "wm8994-ldo",
		.id = 1,
		.pm_runtime_no_callbacks = true,
	},
};

static struct resource wm8994_codec_resources[] = {
	{
		.start = WM8994_IRQ_TEMP_SHUT,
		.end   = WM8994_IRQ_TEMP_WARN,
		.flags = IORESOURCE_IRQ,
	},
};

static struct resource wm8994_gpio_resources[] = {
	{
		.start = WM8994_IRQ_GPIO(1),
		.end   = WM8994_IRQ_GPIO(11),
		.flags = IORESOURCE_IRQ,
	},
};

static const struct mfd_cell wm8994_devs[] = {
	{
		.name = "wm8994-codec",
		.num_resources = ARRAY_SIZE(wm8994_codec_resources),
		.resources = wm8994_codec_resources,
	},

	{
		.name = "wm8994-gpio",
		.num_resources = ARRAY_SIZE(wm8994_gpio_resources),
		.resources = wm8994_gpio_resources,
		.pm_runtime_no_callbacks = true,
	},
};

/*
 * Supplies for the main bulk of CODEC; the LDO supplies are ignored
 * and should be handled via the standard regulator API supply
 * management.
 */
static const char *wm1811_main_supplies[] = {
	"DBVDD1",
	"DBVDD2",
	"DBVDD3",
	"DCVDD",
	"AVDD1",
	"AVDD2",
	"CPVDD",
	"SPKVDD1",
	"SPKVDD2",
};

static const char *wm8994_main_supplies[] = {
	"DBVDD",
	"DCVDD",
	"AVDD1",
	"AVDD2",
	"CPVDD",
	"SPKVDD1",
	"SPKVDD2",
};

static const char *wm8958_main_supplies[] = {
	"DBVDD1",
	"DBVDD2",
	"DBVDD3",
	"DCVDD",
	"AVDD1",
	"AVDD2",
	"CPVDD",
	"SPKVDD1",
	"SPKVDD2",
};

#ifdef CONFIG_PM
static int wm8994_suspend(struct device *dev)
{
	struct wm8994 *wm8994 = dev_get_drvdata(dev);
	int ret;

	/* Don't actually go through with the suspend if the CODEC is
	 * still active for accessory detect. */
	switch (wm8994->type) {
	case WM8958:
	case WM1811:
		ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
		if (ret < 0) {
			dev_err(dev, "Failed to read power status: %d\n", ret);
		} else if (ret & WM8958_MICD_ENA) {
			dev_dbg(dev, "CODEC still active, ignoring suspend\n");
			return 0;
		}
		break;
	default:
		break;
	}

	/* Disable LDO pulldowns while the device is suspended if we
	 * don't know that something will be driving them. */
	if (!wm8994->ldo_ena_always_driven)
		wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
				WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
				WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);

	/* Explicitly put the device into reset in case regulators
	 * don't get disabled in order to ensure consistent restart.
	 */
	wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
			 wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));

	regcache_mark_dirty(wm8994->regmap);

	/* Restore GPIO registers to prevent problems with mismatched
	 * pin configurations.
	 */
	ret = regcache_sync_region(wm8994->regmap, WM8994_GPIO_1,
				   WM8994_GPIO_11);
	if (ret != 0)
		dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);

	/* In case one of the GPIOs is used as a wake input. */
	ret = regcache_sync_region(wm8994->regmap,
				   WM8994_INTERRUPT_STATUS_1_MASK,
				   WM8994_INTERRUPT_STATUS_1_MASK);
	if (ret != 0)
		dev_err(dev, "Failed to restore interrupt mask: %d\n", ret);

	regcache_cache_only(wm8994->regmap, true);
	wm8994->suspended = true;

	ret = regulator_bulk_disable(wm8994->num_supplies,
				     wm8994->supplies);
	if (ret != 0) {
		dev_err(dev, "Failed to disable supplies: %d\n", ret);
		return ret;
	}

	return 0;
}

static int wm8994_resume(struct device *dev)
{
	struct wm8994 *wm8994 = dev_get_drvdata(dev);
	int ret;

	/* We may have lied to the PM core about suspending */
	if (!wm8994->suspended)
		return 0;

	ret = regulator_bulk_enable(wm8994->num_supplies,
				    wm8994->supplies);
	if (ret != 0) {
		dev_err(dev, "Failed to enable supplies: %d\n", ret);
		return ret;
	}

	regcache_cache_only(wm8994->regmap, false);
	ret = regcache_sync(wm8994->regmap);
	if (ret != 0) {
		dev_err(dev, "Failed to restore register map: %d\n", ret);
		goto err_enable;
	}

	/* Disable LDO pulldowns while the device is active */
	wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
			WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
			0);

	wm8994->suspended = false;

	return 0;

err_enable:
	regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);

	return ret;
}
#endif

#ifdef CONFIG_REGULATOR
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
{
	struct wm8994_ldo_pdata *ldo_pdata;

	if (!pdata)
		return 0;

	ldo_pdata = &pdata->ldo[ldo];

	if (!ldo_pdata->init_data)
		return 0;

	return ldo_pdata->init_data->num_consumer_supplies != 0;
}
#else
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
{
	return 0;
}
#endif

static const struct reg_sequence wm8994_revc_patch[] = {
	{ 0x102, 0x3 },
	{ 0x56, 0x3 },
	{ 0x817, 0x0 },
	{ 0x102, 0x0 },
};

static const struct reg_sequence wm8958_reva_patch[] = {
	{ 0x102, 0x3 },
	{ 0xcb, 0x81 },
	{ 0x817, 0x0 },
	{ 0x102, 0x0 },
};

static const struct reg_sequence wm1811_reva_patch[] = {
	{ 0x102, 0x3 },
	{ 0x56, 0xc07 },
	{ 0x5d, 0x7e },
	{ 0x5e, 0x0 },
	{ 0x102, 0x0 },
};

#ifdef CONFIG_OF
static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
{
	struct device_node *np = wm8994->dev->of_node;
	struct wm8994_pdata *pdata = &wm8994->pdata;
	int i;

	if (!np)
		return 0;

	if (of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_defaults,
				       ARRAY_SIZE(pdata->gpio_defaults)) >= 0) {
		for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
			if (wm8994->pdata.gpio_defaults[i] == 0)
				pdata->gpio_defaults[i]
					= WM8994_CONFIGURE_GPIO;
		}
	}

	of_property_read_u32_array(np, "wlf,micbias-cfg", pdata->micbias,
				   ARRAY_SIZE(pdata->micbias));

	pdata->lineout1_diff = true;
	pdata->lineout2_diff = true;
	if (of_find_property(np, "wlf,lineout1-se", NULL))
		pdata->lineout1_diff = false;
	if (of_find_property(np, "wlf,lineout2-se", NULL))
		pdata->lineout2_diff = false;

	if (of_find_property(np, "wlf,lineout1-feedback", NULL))
		pdata->lineout1fb = true;
	if (of_find_property(np, "wlf,lineout2-feedback", NULL))
		pdata->lineout2fb = true;

	if (of_find_property(np, "wlf,ldoena-always-driven", NULL))
		pdata->lineout2fb = true;

	pdata->spkmode_pu = of_property_read_bool(np, "wlf,spkmode-pu");

	pdata->csnaddr_pd = of_property_read_bool(np, "wlf,csnaddr-pd");

	return 0;
}
#else
static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
{
	return 0;
}
#endif

/*
 * Instantiate the generic non-control parts of the device.
 */
static int wm8994_device_init(struct wm8994 *wm8994, int irq)
{
	struct wm8994_pdata *pdata;
	struct regmap_config *regmap_config;
	const struct reg_sequence *regmap_patch = NULL;
	const char *devname;
	int ret, i, patch_regs = 0;
	int pulls = 0;

	if (dev_get_platdata(wm8994->dev)) {
		pdata = dev_get_platdata(wm8994->dev);
		wm8994->pdata = *pdata;
	}
	pdata = &wm8994->pdata;

	ret = wm8994_set_pdata_from_of(wm8994);
	if (ret != 0)
		return ret;

	dev_set_drvdata(wm8994->dev, wm8994);

	/* Add the on-chip regulators first for bootstrapping */
	ret = mfd_add_devices(wm8994->dev, 0,
			      wm8994_regulator_devs,
			      ARRAY_SIZE(wm8994_regulator_devs),
			      NULL, 0, NULL);
	if (ret != 0) {
		dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
		goto err;
	}

	switch (wm8994->type) {
	case WM1811:
		wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
		break;
	case WM8994:
		wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
		break;
	case WM8958:
		wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies);
		break;
	default:
		BUG();
		goto err;
	}

	wm8994->supplies = devm_kcalloc(wm8994->dev,
					wm8994->num_supplies,
					sizeof(struct regulator_bulk_data),
					GFP_KERNEL);
	if (!wm8994->supplies) {
		ret = -ENOMEM;
		goto err;
	}

	switch (wm8994->type) {
	case WM1811:
		for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
			wm8994->supplies[i].supply = wm1811_main_supplies[i];
		break;
	case WM8994:
		for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
			wm8994->supplies[i].supply = wm8994_main_supplies[i];
		break;
	case WM8958:
		for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++)
			wm8994->supplies[i].supply = wm8958_main_supplies[i];
		break;
	default:
		BUG();
		goto err;
	}

	/*
	 * Can't use devres helper here as some of the supplies are provided by
	 * wm8994->dev's children (regulators) and those regulators are
	 * unregistered by the devres core before the supplies are freed.
	 */
	ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
				 wm8994->supplies);
	if (ret != 0) {
		dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
		goto err;
	}

	ret = regulator_bulk_enable(wm8994->num_supplies, wm8994->supplies);
	if (ret != 0) {
		dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret);
		goto err_regulator_free;
	}

	ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET);
	if (ret < 0) {
		dev_err(wm8994->dev, "Failed to read ID register\n");
		goto err_enable;
	}
	switch (ret) {
	case 0x1811:
		devname = "WM1811";
		if (wm8994->type != WM1811)
			dev_warn(wm8994->dev, "Device registered as type %d\n",
				 wm8994->type);
		wm8994->type = WM1811;
		break;
	case 0x8994:
		devname = "WM8994";
		if (wm8994->type != WM8994)
			dev_warn(wm8994->dev, "Device registered as type %d\n",
				 wm8994->type);
		wm8994->type = WM8994;
		break;
	case 0x8958:
		devname = "WM8958";
		if (wm8994->type != WM8958)
			dev_warn(wm8994->dev, "Device registered as type %d\n",
				 wm8994->type);
		wm8994->type = WM8958;
		break;
	default:
		dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n",
			ret);
		ret = -EINVAL;
		goto err_enable;
	}

	ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION);
	if (ret < 0) {
		dev_err(wm8994->dev, "Failed to read revision register: %d\n",
			ret);
		goto err_enable;
	}
	wm8994->revision = ret & WM8994_CHIP_REV_MASK;
	wm8994->cust_id = (ret & WM8994_CUST_ID_MASK) >> WM8994_CUST_ID_SHIFT;

	switch (wm8994->type) {
	case WM8994:
		switch (wm8994->revision) {
		case 0:
		case 1:
			dev_warn(wm8994->dev,
				 "revision %c not fully supported\n",
				 'A' + wm8994->revision);
			break;
		case 2:
		case 3:
		default:
			regmap_patch = wm8994_revc_patch;
			patch_regs = ARRAY_SIZE(wm8994_revc_patch);
			break;
		}
		break;

	case WM8958:
		switch (wm8994->revision) {
		case 0:
			regmap_patch = wm8958_reva_patch;
			patch_regs = ARRAY_SIZE(wm8958_reva_patch);
			break;
		default:
			break;
		}
		break;

	case WM1811:
		/* Revision C did not change the relevant layer */
		if (wm8994->revision > 1)
			wm8994->revision++;

		regmap_patch = wm1811_reva_patch;
		patch_regs = ARRAY_SIZE(wm1811_reva_patch);
		break;

	default:
		break;
	}

	dev_info(wm8994->dev, "%s revision %c CUST_ID %02x\n", devname,
		 'A' + wm8994->revision, wm8994->cust_id);

	switch (wm8994->type) {
	case WM1811:
		regmap_config = &wm1811_regmap_config;
		break;
	case WM8994:
		regmap_config = &wm8994_regmap_config;
		break;
	case WM8958:
		regmap_config = &wm8958_regmap_config;
		break;
	default:
		dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type);
		ret = -EINVAL;
		goto err_enable;
	}

	ret = regmap_reinit_cache(wm8994->regmap, regmap_config);
	if (ret != 0) {
		dev_err(wm8994->dev, "Failed to reinit register cache: %d\n",
			ret);
		goto err_enable;
	}

	/* Explicitly put the device into reset in case regulators
	 * don't get disabled in order to ensure we know the device
	 * state.
	 */
	ret = wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
			       wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
	if (ret != 0) {
		dev_err(wm8994->dev, "Failed to reset device: %d\n", ret);
		goto err_enable;
	}

	if (regmap_patch) {
		ret = regmap_register_patch(wm8994->regmap, regmap_patch,
					    patch_regs);
		if (ret != 0) {
			dev_err(wm8994->dev, "Failed to register patch: %d\n",
				ret);
			goto err_enable;
		}
	}

	wm8994->irq_base = pdata->irq_base;
	wm8994->gpio_base = pdata->gpio_base;

	/* GPIO configuration is only applied if it's non-zero */
	for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
		if (pdata->gpio_defaults[i]) {
			wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
					0xffff, pdata->gpio_defaults[i]);
		}
	}

	wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;

	if (pdata->spkmode_pu)
		pulls |= WM8994_SPKMODE_PU;
	if (pdata->csnaddr_pd)
		pulls |= WM8994_CSNADDR_PD;

	/* Disable unneeded pulls */
	wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
			WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD |
			WM8994_SPKMODE_PU | WM8994_CSNADDR_PD,
			pulls);

	/* In some system designs where the regulators are not in use,
	 * we can achieve a small reduction in leakage currents by
	 * floating LDO outputs.  This bit makes no difference if the
	 * LDOs are enabled, it only affects cases where the LDOs were
	 * in operation and are then disabled.
	 */
	for (i = 0; i < WM8994_NUM_LDO_REGS; i++) {
		if (wm8994_ldo_in_use(pdata, i))
			wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
					WM8994_LDO1_DISCH, WM8994_LDO1_DISCH);
		else
			wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
					WM8994_LDO1_DISCH, 0);
	}

	wm8994_irq_init(wm8994);

	ret = mfd_add_devices(wm8994->dev, -1,
			      wm8994_devs, ARRAY_SIZE(wm8994_devs),
			      NULL, 0, NULL);
	if (ret != 0) {
		dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
		goto err_irq;
	}

	pm_runtime_enable(wm8994->dev);
	pm_runtime_idle(wm8994->dev);

	return 0;

err_irq:
	wm8994_irq_exit(wm8994);
err_enable:
	regulator_bulk_disable(wm8994->num_supplies,
			       wm8994->supplies);
err_regulator_free:
	regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
err:
	mfd_remove_devices(wm8994->dev);
	return ret;
}

static void wm8994_device_exit(struct wm8994 *wm8994)
{
	pm_runtime_disable(wm8994->dev);
	wm8994_irq_exit(wm8994);
	regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);
	regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
	mfd_remove_devices(wm8994->dev);
}

static const struct of_device_id wm8994_of_match[] = {
	{ .compatible = "wlf,wm1811", .data = (void *)WM1811 },
	{ .compatible = "wlf,wm8994", .data = (void *)WM8994 },
	{ .compatible = "wlf,wm8958", .data = (void *)WM8958 },
	{ }
};
MODULE_DEVICE_TABLE(of, wm8994_of_match);

static int wm8994_i2c_probe(struct i2c_client *i2c,
				      const struct i2c_device_id *id)
{
	const struct of_device_id *of_id;
	struct wm8994 *wm8994;
	int ret;

	wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL);
	if (wm8994 == NULL)
		return -ENOMEM;

	i2c_set_clientdata(i2c, wm8994);
	wm8994->dev = &i2c->dev;
	wm8994->irq = i2c->irq;

	if (i2c->dev.of_node) {
		of_id = of_match_device(wm8994_of_match, &i2c->dev);
		if (of_id)
			wm8994->type = (enum wm8994_type)of_id->data;
	} else {
		wm8994->type = id->driver_data;
	}

	wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config);
	if (IS_ERR(wm8994->regmap)) {
		ret = PTR_ERR(wm8994->regmap);
		dev_err(wm8994->dev, "Failed to allocate register map: %d\n",
			ret);
		return ret;
	}

	return wm8994_device_init(wm8994, i2c->irq);
}

static int wm8994_i2c_remove(struct i2c_client *i2c)
{
	struct wm8994 *wm8994 = i2c_get_clientdata(i2c);

	wm8994_device_exit(wm8994);

	return 0;
}

static const struct i2c_device_id wm8994_i2c_id[] = {
	{ "wm1811", WM1811 },
	{ "wm1811a", WM1811 },
	{ "wm8994", WM8994 },
	{ "wm8958", WM8958 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);

static const struct dev_pm_ops wm8994_pm_ops = {
	SET_RUNTIME_PM_OPS(wm8994_suspend, wm8994_resume, NULL)
};

static struct i2c_driver wm8994_i2c_driver = {
	.driver = {
		.name = "wm8994",
		.pm = &wm8994_pm_ops,
		.of_match_table = of_match_ptr(wm8994_of_match),
	},
	.probe = wm8994_i2c_probe,
	.remove = wm8994_i2c_remove,
	.id_table = wm8994_i2c_id,
};

module_i2c_driver(wm8994_i2c_driver);

MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");