[PATCH] sky2: incremental transmit completion
Since a transmit can take several control blocks, the old code waited
until the last control block was marked as done. This code processes
the return values incrementally. This makes slots in the tx ring available
and less chance of getting stuck.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index b908596..64af764 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -769,9 +769,16 @@
struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
+ le->ctrl = 0;
return le;
}
+static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
+ struct sky2_tx_le *le)
+{
+ return sky2->tx_ring + (le - sky2->tx_le);
+}
+
/* Update chip's next pointer */
static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
{
@@ -786,6 +793,7 @@
{
struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
+ le->ctrl = 0;
return le;
}
@@ -805,7 +813,6 @@
if (sky2->rx_addr64 != hi) {
le = sky2_next_rx(sky2);
le->addr = cpu_to_le32(hi);
- le->ctrl = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
sky2->rx_addr64 = high32(map + len);
}
@@ -813,7 +820,6 @@
le = sky2_next_rx(sky2);
le->addr = cpu_to_le32((u32) map);
le->length = cpu_to_le16(len);
- le->ctrl = 0;
le->opcode = OP_PACKET | HW_OWNER;
}
@@ -877,7 +883,7 @@
memset(sky2->rx_le, 0, RX_LE_BYTES);
for (i = 0; i < sky2->rx_pending; i++) {
- struct ring_info *re = sky2->rx_ring + i;
+ struct rx_ring_info *re = sky2->rx_ring + i;
if (re->skb) {
pci_unmap_single(sky2->hw->pdev,
@@ -1008,7 +1014,7 @@
rx_set_checksum(sky2);
for (i = 0; i < sky2->rx_pending; i++) {
- struct ring_info *re = sky2->rx_ring + i;
+ struct rx_ring_info *re = sky2->rx_ring + i;
re->skb = sky2_alloc_skb(sky2->netdev, sky2->rx_bufsize,
GFP_KERNEL);
@@ -1094,7 +1100,7 @@
goto err_out;
memset(sky2->rx_le, 0, RX_LE_BYTES);
- sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct ring_info),
+ sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
GFP_KERNEL);
if (!sky2->rx_ring)
goto err_out;
@@ -1241,13 +1247,10 @@
mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
addr64 = high32(mapping);
- re = sky2->tx_ring + sky2->tx_prod;
-
/* Send high bits if changed or crosses boundary */
if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) {
le = get_tx_le(sky2);
le->addr = cpu_to_le32(addr64);
- le->ctrl = 0;
le->opcode = OP_ADDR64 | HW_OWNER;
sky2->tx_addr64 = high32(mapping + len);
}
@@ -1263,7 +1266,6 @@
le = get_tx_le(sky2);
le->addr = cpu_to_le32(mss);
le->opcode = OP_LRGLEN | HW_OWNER;
- le->ctrl = 0;
sky2->tx_last_mss = mss;
}
}
@@ -1276,7 +1278,6 @@
le = get_tx_le(sky2);
le->addr = 0;
le->opcode = OP_VLAN|HW_OWNER;
- le->ctrl = 0;
} else
le->opcode |= OP_VLAN;
le->length = cpu_to_be16(vlan_tx_tag_get(skb));
@@ -1313,13 +1314,13 @@
le->ctrl = ctrl;
le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
- /* Record the transmit mapping info */
+ re = tx_le_re(sky2, le);
re->skb = skb;
pci_unmap_addr_set(re, mapaddr, mapping);
+ pci_unmap_len_set(re, maplen, len);
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- struct tx_ring_info *fre;
+ const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
@@ -1338,12 +1339,12 @@
le->ctrl = ctrl;
le->opcode = OP_BUFFER | HW_OWNER;
- fre = sky2->tx_ring
- + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE);
- pci_unmap_addr_set(fre, mapaddr, mapping);
+ re = tx_le_re(sky2, le);
+ re->skb = skb;
+ pci_unmap_addr_set(re, mapaddr, mapping);
+ pci_unmap_len_set(re, maplen, frag->size);
}
- re->idx = sky2->tx_prod;
le->ctrl |= EOP;
if (tx_avail(sky2) <= MAX_SKB_TX_LE)
@@ -1361,49 +1362,47 @@
* Free ring elements from starting at tx_cons until "done"
*
* NB: the hardware will tell us about partial completion of multi-part
- * buffers; these are deferred until completion.
+ * buffers so make sure not to free skb to early.
*/
static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
{
struct net_device *dev = sky2->netdev;
struct pci_dev *pdev = sky2->hw->pdev;
- u16 nxt, put;
- unsigned i;
+ unsigned idx;
BUG_ON(done >= TX_RING_SIZE);
- if (unlikely(netif_msg_tx_done(sky2)))
- printk(KERN_DEBUG "%s: tx done, up to %u\n",
- dev->name, done);
+ for (idx = sky2->tx_cons; idx != done;
+ idx = RING_NEXT(idx, TX_RING_SIZE)) {
+ struct sky2_tx_le *le = sky2->tx_le + idx;
+ struct tx_ring_info *re = sky2->tx_ring + idx;
- for (put = sky2->tx_cons; put != done; put = nxt) {
- struct tx_ring_info *re = sky2->tx_ring + put;
- struct sk_buff *skb = re->skb;
-
- nxt = re->idx;
- BUG_ON(nxt >= TX_RING_SIZE);
- prefetch(sky2->tx_ring + nxt);
-
- /* Check for partial status */
- if (tx_dist(put, done) < tx_dist(put, nxt))
+ switch(le->opcode & ~HW_OWNER) {
+ case OP_LARGESEND:
+ case OP_PACKET:
+ pci_unmap_single(pdev,
+ pci_unmap_addr(re, mapaddr),
+ pci_unmap_len(re, maplen),
+ PCI_DMA_TODEVICE);
break;
-
- skb = re->skb;
- pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
- skb_headlen(skb), PCI_DMA_TODEVICE);
-
- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- struct tx_ring_info *fre;
- fre = sky2->tx_ring + RING_NEXT(put + i, TX_RING_SIZE);
- pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr),
- skb_shinfo(skb)->frags[i].size,
+ case OP_BUFFER:
+ pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
+ pci_unmap_len(re, maplen),
PCI_DMA_TODEVICE);
+ break;
}
- dev_kfree_skb(skb);
+ if (le->ctrl & EOP) {
+ if (unlikely(netif_msg_tx_done(sky2)))
+ printk(KERN_DEBUG "%s: tx done %u\n",
+ dev->name, idx);
+ dev_kfree_skb(re->skb);
+ }
+
+ le->opcode = 0; /* paranoia */
}
- sky2->tx_cons = put;
+ sky2->tx_cons = idx;
if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
netif_wake_queue(dev);
}
@@ -1843,7 +1842,7 @@
u16 length, u32 status)
{
struct sky2_port *sky2 = netdev_priv(dev);
- struct ring_info *re = sky2->rx_ring + sky2->rx_next;
+ struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
struct sk_buff *skb = NULL;
if (unlikely(netif_msg_rx_status(sky2)))
@@ -1889,7 +1888,7 @@
prefetch(skb->data);
re->mapaddr = pci_map_single(sky2->hw->pdev, nskb->data,
- sky2->rx_bufsize, PCI_DMA_FROMDEVICE);
+ sky2->rx_bufsize, PCI_DMA_FROMDEVICE);
}
skb_put(skb, length);
