[PATCH] VIA IRQ quirk

Delete quirk_via_bridge(), restore quirk_via_irqpic() -- but now
improved to be invoked upon device ENABLE, and now only for VIA devices
-- not all devices behind VIA bridges.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 12b0eea..8093f2e 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -391,7 +391,6 @@
 	u8			pin = 0;
 	int			edge_level = ACPI_LEVEL_SENSITIVE;
 	int			active_high_low = ACPI_ACTIVE_LOW;
-	extern int		via_interrupt_line_quirk;
 	char			*link = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_pci_irq_enable");
@@ -444,9 +443,6 @@
 		}
  	}
 
-	if (via_interrupt_line_quirk)
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq & 15);
-
 	dev->irq = acpi_register_gsi(irq, edge_level, active_high_low);
 
 	printk(KERN_INFO PREFIX "PCI Interrupt %s[%c] -> ",
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 026aa04..afc9d29 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -18,6 +18,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/acpi.h>
 #include "pci.h"
 
 /* Deal with broken BIOS'es that neglect to enable passive release,
@@ -467,9 +468,6 @@
  * non-x86 architectures (yes Via exists on PPC among other places),
  * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
  * interrupts delivered properly.
- *
- * TODO: When we have device-specific interrupt routers,
- * quirk_via_irqpic will go away from quirks.
  */
 
 /*
@@ -494,6 +492,29 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C586_3,	quirk_via_acpi );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_via_acpi );
 
+static void __devinit quirk_via_irqpic(struct pci_dev *dev)
+{
+	u8 irq, new_irq;
+
+#ifdef CONFIG_X86_IO_APIC
+	if (nr_ioapics && !skip_ioapic_setup)
+		return;
+#endif
+#ifdef CONFIG_ACPI
+	if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
+		return;
+#endif
+	new_irq = dev->irq & 0xf;
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+	if (new_irq != irq) {
+		printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
+			pci_name(dev), irq, new_irq);
+		udelay(15);	/* unknown if delay really needed */
+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
+	}
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
+
 /*
  * PIIX3 USB: We have to disable USB interrupts that are
  * hardwired to PIRQD# and may be shared with an
@@ -683,19 +704,6 @@
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82454NX,	quirk_disable_pxb );
 
-/*
- *	VIA northbridges care about PCI_INTERRUPT_LINE
- */
-int via_interrupt_line_quirk;
-
-static void __devinit quirk_via_bridge(struct pci_dev *pdev)
-{
-	if(pdev->devfn == 0) {
-		printk(KERN_INFO "PCI: Via IRQ fixup\n");
-		via_interrupt_line_quirk = 1;
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_ANY_ID,                     quirk_via_bridge );
 
 /*
  *	Serverworks CSB5 IDE does not fully support native mode