diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index 13b707b..c3a14e0 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -13,9 +13,6 @@
                                   4 = active high level-sensitive
                                   8 = active low level-sensitive
 
-Optional parent device properties:
-- reg                    : contains the PRCMU mailbox address for the AB8500 i2c port
-
 The AB8500 consists of a large and varied group of sub-devices:
 
 Device                     IRQ Names              Supply Names   Description
@@ -86,9 +83,8 @@
    - stericsson,amic2-bias-vamic1           : Analoge Mic wishes to use a non-standard Vamic
    - stericsson,earpeice-cmv                : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
 
-ab8500@5 {
+ab8500 {
          compatible = "stericsson,ab8500";
-         reg = <5>; /* mailbox 5 is i2c */
          interrupts = <0 40 0x4>;
          interrupt-controller;
          #interrupt-cells = <2>;
diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index 1e1145c..8f01cb1 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -11,6 +11,9 @@
 	- "nvidia,tegra20-uart"
 	- "nxp,lpc3220-uart"
 	- "ibm,qpace-nwp-serial"
+	- "altr,16550-FIFO32"
+	- "altr,16550-FIFO64"
+	- "altr,16550-FIFO128"
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.
diff --git a/MAINTAINERS b/MAINTAINERS
index c08411b..50b4d73 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4005,6 +4005,22 @@
 S:	Maintained
 F:	drivers/usb/atm/ueagle-atm.c
 
+INA209 HARDWARE MONITOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/ina209
+F:	Documentation/devicetree/bindings/i2c/ina209.txt
+F:	drivers/hwmon/ina209.c
+
+INA2XX HARDWARE MONITOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/ina2xx
+F:	drivers/hwmon/ina2xx.c
+F:	include/linux/platform_data/ina2xx.h
+
 INDUSTRY PACK SUBSYSTEM (IPACK)
 M:	Samuel Iglesias Gonsalvez <siglesias@igalia.com>
 M:	Jens Taprogge <jens.taprogge@taprogge.org>
@@ -5098,6 +5114,15 @@
 F:	Documentation/hwmon/max6650
 F:	drivers/hwmon/max6650.c
 
+MAX6697 HARDWARE MONITOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/max6697
+F:	Documentation/devicetree/bindings/i2c/max6697.txt
+F:	drivers/hwmon/max6697.c
+F:	include/linux/platform_data/max6697.h
+
 MAXIRADIO FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 69140ba..9de9309 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -319,9 +319,8 @@
 				};
 			};
 
-			ab8500@5 {
+			ab8500 {
 				compatible = "stericsson,ab8500";
-				reg = <5>; /* mailbox 5 is i2c */
 				interrupt-parent = <&intc>;
 				interrupts = <0 40 0x4>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
index 592fb9d..379128e 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/href.dtsi
@@ -221,7 +221,7 @@
 				};
 			};
 
-			ab8500@5 {
+			ab8500 {
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 55f4191..2b587a7 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -158,7 +158,7 @@
 				};
 			};
 
-			ab8500@5 {
+			ab8500 {
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 27f31a5..d3ec32f 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -298,7 +298,7 @@
 				};
 			};
 
-			ab8500@5 {
+			ab8500 {
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 2ea7059..c20a870 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -176,6 +176,7 @@
 	/* If you choose to use a pin other than PB16 it needs to be 3.3V */
 	.pin		= AT91_PIN_PB16,
 	.is_open_drain  = 1,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 static struct platform_device w1_device = {
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index a033b8d..869cbec 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -188,6 +188,7 @@
 static struct w1_gpio_platform_data w1_gpio_pdata = {
 	.pin		= AT91_PIN_PA29,
 	.is_open_drain	= 1,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 static struct platform_device w1_device = {
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index d42730a..d599e35 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -163,6 +163,7 @@
 
 static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
 	.pin			= 14,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 static struct platform_device vulcan_w1_gpio = {
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index af41888..969b0ba 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -505,6 +505,7 @@
 	.pin			= GPIO_ONE_WIRE,
 	.is_open_drain		= 0,
 	.enable_external_pullup	= w1_enable_external_pullup,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 struct platform_device raumfeld_w1_gpio_device = {
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c7e3759..e9db6b4 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -342,6 +342,7 @@
 {
 	struct dma_pool *pool = &atomic_pool;
 	pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
+	gfp_t gfp = GFP_KERNEL | GFP_DMA;
 	unsigned long nr_pages = pool->size >> PAGE_SHIFT;
 	unsigned long *bitmap;
 	struct page *page;
@@ -361,8 +362,8 @@
 		ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
 					      atomic_pool_init);
 	else
-		ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
-					   &page, atomic_pool_init);
+		ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page,
+					   atomic_pool_init);
 	if (ptr) {
 		int i;
 
diff --git a/arch/m32r/include/uapi/asm/stat.h b/arch/m32r/include/uapi/asm/stat.h
index da4518f..98470fe 100644
--- a/arch/m32r/include/uapi/asm/stat.h
+++ b/arch/m32r/include/uapi/asm/stat.h
@@ -63,10 +63,10 @@
 	long long	st_size;
 	unsigned long	st_blksize;
 
-#if defined(__BIG_ENDIAN)
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
 	unsigned long	__pad4;		/* future possible st_blocks high bits */
 	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
-#elif defined(__LITTLE_ENDIAN)
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
 	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
 	unsigned long	__pad4;		/* future possible st_blocks high bits */
 #else
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 826054a..0e9bdd3 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -729,3 +729,11 @@
 		}
 	}
 }
+
+void perf_restore_debug_store(void)
+{
+	if (!x86_pmu.bts && !x86_pmu.pebs)
+		return;
+
+	init_debug_store_on_cpu(smp_processor_id());
+}
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 120cee1..3c68768 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -11,6 +11,7 @@
 #include <linux/suspend.h>
 #include <linux/export.h>
 #include <linux/smp.h>
+#include <linux/perf_event.h>
 
 #include <asm/pgtable.h>
 #include <asm/proto.h>
@@ -228,6 +229,7 @@
 	do_fpu_end();
 	x86_platform.restore_sched_clock_state();
 	mtrr_bp_restore();
+	perf_restore_debug_store();
 }
 
 /* Needed by apm.c */
diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c
index 41df29f..ebbb9f4 100644
--- a/drivers/hwmon/lineage-pem.c
+++ b/drivers/hwmon/lineage-pem.c
@@ -422,6 +422,7 @@
 	&sensor_dev_attr_in2_input.dev_attr.attr,
 	&sensor_dev_attr_curr1_input.dev_attr.attr,
 	&sensor_dev_attr_power1_input.dev_attr.attr,
+	NULL
 };
 
 static const struct attribute_group pem_input_group = {
@@ -432,6 +433,7 @@
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan2_input.dev_attr.attr,
 	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	NULL
 };
 
 static const struct attribute_group pem_fan_group = {
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index a58de38..6d61307 100644
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -59,7 +59,7 @@
 struct ltc2978_data {
 	enum chips id;
 	int vin_min, vin_max;
-	int temp_min, temp_max;
+	int temp_min, temp_max[2];
 	int vout_min[8], vout_max[8];
 	int iout_max[2];
 	int temp2_max;
@@ -113,9 +113,10 @@
 		ret = pmbus_read_word_data(client, page,
 					   LTC2978_MFR_TEMPERATURE_PEAK);
 		if (ret >= 0) {
-			if (lin11_to_val(ret) > lin11_to_val(data->temp_max))
-				data->temp_max = ret;
-			ret = data->temp_max;
+			if (lin11_to_val(ret)
+			    > lin11_to_val(data->temp_max[page]))
+				data->temp_max[page] = ret;
+			ret = data->temp_max[page];
 		}
 		break;
 	case PMBUS_VIRT_RESET_VOUT_HISTORY:
@@ -266,7 +267,7 @@
 		break;
 	case PMBUS_VIRT_RESET_TEMP_HISTORY:
 		data->temp_min = 0x7bff;
-		data->temp_max = 0x7c00;
+		data->temp_max[page] = 0x7c00;
 		ret = ltc2978_clear_peaks(client, page, data->id);
 		break;
 	default:
@@ -323,7 +324,8 @@
 	data->vin_min = 0x7bff;
 	data->vin_max = 0x7c00;
 	data->temp_min = 0x7bff;
-	data->temp_max = 0x7c00;
+	for (i = 0; i < ARRAY_SIZE(data->temp_max); i++)
+		data->temp_max[i] = 0x7c00;
 	data->temp2_max = 0x7c00;
 
 	switch (data->id) {
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 80eef50..9add6092 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -766,12 +766,14 @@
 static int pmbus_add_attribute(struct pmbus_data *data, struct attribute *attr)
 {
 	if (data->num_attributes >= data->max_attributes - 1) {
-		data->max_attributes += PMBUS_ATTR_ALLOC_SIZE;
-		data->group.attrs = krealloc(data->group.attrs,
-					     sizeof(struct attribute *) *
-					     data->max_attributes, GFP_KERNEL);
-		if (data->group.attrs == NULL)
+		int new_max_attrs = data->max_attributes + PMBUS_ATTR_ALLOC_SIZE;
+		void *new_attrs = krealloc(data->group.attrs,
+					   new_max_attrs * sizeof(void *),
+					   GFP_KERNEL);
+		if (!new_attrs)
 			return -ENOMEM;
+		data->group.attrs = new_attrs;
+		data->max_attributes = new_max_attrs;
 	}
 
 	data->group.attrs[data->num_attributes++] = attr;
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 0198324..bd33473 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -62,7 +62,7 @@
 int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
 {
 	int err;
-	struct st_sensor_odr_avl odr_out;
+	struct st_sensor_odr_avl odr_out = {0, 0};
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
 	err = st_sensors_match_odr(sdata->sensor, odr, &odr_out);
@@ -114,7 +114,7 @@
 
 static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
 {
-	int err, i;
+	int err, i = 0;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
 	err = st_sensors_match_fs(sdata->sensor, fs, &i);
@@ -139,14 +139,13 @@
 
 int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable)
 {
-	bool found;
 	u8 tmp_value;
 	int err = -EINVAL;
-	struct st_sensor_odr_avl odr_out;
+	bool found = false;
+	struct st_sensor_odr_avl odr_out = {0, 0};
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
 	if (enable) {
-		found = false;
 		tmp_value = sdata->sensor->pw.value_on;
 		if ((sdata->sensor->odr.addr == sdata->sensor->pw.addr) &&
 			(sdata->sensor->odr.mask == sdata->sensor->pw.mask)) {
diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c
index 2fe1d4e..74f2d52 100644
--- a/drivers/iio/dac/ad5064.c
+++ b/drivers/iio/dac/ad5064.c
@@ -27,7 +27,6 @@
 #define AD5064_ADDR(x)				((x) << 20)
 #define AD5064_CMD(x)				((x) << 24)
 
-#define AD5064_ADDR_DAC(chan)			(chan)
 #define AD5064_ADDR_ALL_DAC			0xF
 
 #define AD5064_CMD_WRITE_INPUT_N		0x0
@@ -131,15 +130,15 @@
 }
 
 static int ad5064_sync_powerdown_mode(struct ad5064_state *st,
-	unsigned int channel)
+	const struct iio_chan_spec *chan)
 {
 	unsigned int val;
 	int ret;
 
-	val = (0x1 << channel);
+	val = (0x1 << chan->address);
 
-	if (st->pwr_down[channel])
-		val |= st->pwr_down_mode[channel] << 8;
+	if (st->pwr_down[chan->channel])
+		val |= st->pwr_down_mode[chan->channel] << 8;
 
 	ret = ad5064_write(st, AD5064_CMD_POWERDOWN_DAC, 0, val, 0);
 
@@ -169,7 +168,7 @@
 	mutex_lock(&indio_dev->mlock);
 	st->pwr_down_mode[chan->channel] = mode + 1;
 
-	ret = ad5064_sync_powerdown_mode(st, chan->channel);
+	ret = ad5064_sync_powerdown_mode(st, chan);
 	mutex_unlock(&indio_dev->mlock);
 
 	return ret;
@@ -205,7 +204,7 @@
 	mutex_lock(&indio_dev->mlock);
 	st->pwr_down[chan->channel] = pwr_down;
 
-	ret = ad5064_sync_powerdown_mode(st, chan->channel);
+	ret = ad5064_sync_powerdown_mode(st, chan);
 	mutex_unlock(&indio_dev->mlock);
 	return ret ? ret : len;
 }
@@ -258,7 +257,7 @@
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (val > (1 << chan->scan_type.realbits) || val < 0)
+		if (val >= (1 << chan->scan_type.realbits) || val < 0)
 			return -EINVAL;
 
 		mutex_lock(&indio_dev->mlock);
@@ -292,34 +291,44 @@
 	{ },
 };
 
-#define AD5064_CHANNEL(chan, bits) {				\
+#define AD5064_CHANNEL(chan, addr, bits) {			\
 	.type = IIO_VOLTAGE,					\
 	.indexed = 1,						\
 	.output = 1,						\
 	.channel = (chan),					\
 	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |		\
 	IIO_CHAN_INFO_SCALE_SEPARATE_BIT,			\
-	.address = AD5064_ADDR_DAC(chan),			\
+	.address = addr,					\
 	.scan_type = IIO_ST('u', (bits), 16, 20 - (bits)),	\
 	.ext_info = ad5064_ext_info,				\
 }
 
 #define DECLARE_AD5064_CHANNELS(name, bits) \
 const struct iio_chan_spec name[] = { \
-	AD5064_CHANNEL(0, bits), \
-	AD5064_CHANNEL(1, bits), \
-	AD5064_CHANNEL(2, bits), \
-	AD5064_CHANNEL(3, bits), \
-	AD5064_CHANNEL(4, bits), \
-	AD5064_CHANNEL(5, bits), \
-	AD5064_CHANNEL(6, bits), \
-	AD5064_CHANNEL(7, bits), \
+	AD5064_CHANNEL(0, 0, bits), \
+	AD5064_CHANNEL(1, 1, bits), \
+	AD5064_CHANNEL(2, 2, bits), \
+	AD5064_CHANNEL(3, 3, bits), \
+	AD5064_CHANNEL(4, 4, bits), \
+	AD5064_CHANNEL(5, 5, bits), \
+	AD5064_CHANNEL(6, 6, bits), \
+	AD5064_CHANNEL(7, 7, bits), \
+}
+
+#define DECLARE_AD5065_CHANNELS(name, bits) \
+const struct iio_chan_spec name[] = { \
+	AD5064_CHANNEL(0, 0, bits), \
+	AD5064_CHANNEL(1, 3, bits), \
 }
 
 static DECLARE_AD5064_CHANNELS(ad5024_channels, 12);
 static DECLARE_AD5064_CHANNELS(ad5044_channels, 14);
 static DECLARE_AD5064_CHANNELS(ad5064_channels, 16);
 
+static DECLARE_AD5065_CHANNELS(ad5025_channels, 12);
+static DECLARE_AD5065_CHANNELS(ad5045_channels, 14);
+static DECLARE_AD5065_CHANNELS(ad5065_channels, 16);
+
 static const struct ad5064_chip_info ad5064_chip_info_tbl[] = {
 	[ID_AD5024] = {
 		.shared_vref = false,
@@ -328,7 +337,7 @@
 	},
 	[ID_AD5025] = {
 		.shared_vref = false,
-		.channels = ad5024_channels,
+		.channels = ad5025_channels,
 		.num_channels = 2,
 	},
 	[ID_AD5044] = {
@@ -338,7 +347,7 @@
 	},
 	[ID_AD5045] = {
 		.shared_vref = false,
-		.channels = ad5044_channels,
+		.channels = ad5045_channels,
 		.num_channels = 2,
 	},
 	[ID_AD5064] = {
@@ -353,7 +362,7 @@
 	},
 	[ID_AD5065] = {
 		.shared_vref = false,
-		.channels = ad5064_channels,
+		.channels = ad5065_channels,
 		.num_channels = 2,
 	},
 	[ID_AD5628_1] = {
@@ -429,6 +438,7 @@
 {
 	struct iio_dev *indio_dev;
 	struct ad5064_state *st;
+	unsigned int midscale;
 	unsigned int i;
 	int ret;
 
@@ -465,11 +475,6 @@
 			goto error_free_reg;
 	}
 
-	for (i = 0; i < st->chip_info->num_channels; ++i) {
-		st->pwr_down_mode[i] = AD5064_LDAC_PWRDN_1K;
-		st->dac_cache[i] = 0x8000;
-	}
-
 	indio_dev->dev.parent = dev;
 	indio_dev->name = name;
 	indio_dev->info = &ad5064_info;
@@ -477,6 +482,13 @@
 	indio_dev->channels = st->chip_info->channels;
 	indio_dev->num_channels = st->chip_info->num_channels;
 
+	midscale = (1 << indio_dev->channels[0].scan_type.realbits) /  2;
+
+	for (i = 0; i < st->chip_info->num_channels; ++i) {
+		st->pwr_down_mode[i] = AD5064_LDAC_PWRDN_1K;
+		st->dac_cache[i] = midscale;
+	}
+
 	ret = iio_device_register(indio_dev);
 	if (ret)
 		goto error_disable_reg;
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index b5cfa3a..361b232 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -5,6 +5,7 @@
 config INV_MPU6050_IIO
 	tristate "Invensense MPU6050 devices"
 	depends on I2C && SYSFS
+	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
 	  This driver supports the Invensense MPU6050 devices.
diff --git a/drivers/infiniband/hw/mlx4/cm.c b/drivers/infiniband/hw/mlx4/cm.c
index e0d79b2..add98d0 100644
--- a/drivers/infiniband/hw/mlx4/cm.c
+++ b/drivers/infiniband/hw/mlx4/cm.c
@@ -362,7 +362,6 @@
 	INIT_LIST_HEAD(&dev->sriov.cm_list);
 	dev->sriov.sl_id_map = RB_ROOT;
 	idr_init(&dev->sriov.pv_id_table);
-	idr_pre_get(&dev->sriov.pv_id_table, GFP_KERNEL);
 }
 
 /* slave = -1 ==> all slaves */
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 671f5b1..c346941 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -858,6 +858,7 @@
 config AB8500_CORE
 	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 	depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+	select POWER_SUPPLY
 	select MFD_CORE
 	select IRQ_DOMAIN
 	help
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index b1f3561..5f341a5 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -594,9 +594,12 @@
 static int ab8500_gpadc_runtime_resume(struct device *dev)
 {
 	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+	int ret;
 
-	regulator_enable(gpadc->regu);
-	return 0;
+	ret = regulator_enable(gpadc->regu);
+	if (ret)
+		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
+	return ret;
 }
 
 static int ab8500_gpadc_runtime_idle(struct device *dev)
@@ -643,7 +646,7 @@
 	}
 
 	/* VTVout LDO used to power up ab8500-GPADC */
-	gpadc->regu = regulator_get(&pdev->dev, "vddadc");
+	gpadc->regu = devm_regulator_get(&pdev->dev, "vddadc");
 	if (IS_ERR(gpadc->regu)) {
 		ret = PTR_ERR(gpadc->regu);
 		dev_err(gpadc->dev, "failed to get vtvout LDO\n");
@@ -652,7 +655,11 @@
 
 	platform_set_drvdata(pdev, gpadc);
 
-	regulator_enable(gpadc->regu);
+	ret = regulator_enable(gpadc->regu);
+	if (ret) {
+		dev_err(gpadc->dev, "Failed to enable vtvout LDO: %d\n", ret);
+		goto fail_enable;
+	}
 
 	pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY);
 	pm_runtime_use_autosuspend(gpadc->dev);
@@ -663,6 +670,8 @@
 	list_add_tail(&gpadc->node, &ab8500_gpadc_list);
 	dev_dbg(gpadc->dev, "probe success\n");
 	return 0;
+
+fail_enable:
 fail_irq:
 	free_irq(gpadc->irq, gpadc);
 fail:
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 6b5edf6..4febc5c 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -460,15 +460,15 @@
 
 	switch (omap->usbhs_rev) {
 	case OMAP_USBHS_REV1:
-		omap_usbhs_rev1_hostconfig(omap, reg);
+		reg = omap_usbhs_rev1_hostconfig(omap, reg);
 		break;
 
 	case OMAP_USBHS_REV2:
-		omap_usbhs_rev2_hostconfig(omap, reg);
+		reg = omap_usbhs_rev2_hostconfig(omap, reg);
 		break;
 
 	default:	/* newer revisions */
-		omap_usbhs_rev2_hostconfig(omap, reg);
+		reg = omap_usbhs_rev2_hostconfig(omap, reg);
 		break;
 	}
 
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index bbdbc50..73bf76d 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -257,9 +257,24 @@
 			PALMAS_INT1_MASK),
 };
 
-static void palmas_dt_to_pdata(struct device_node *node,
+static int palmas_set_pdata_irq_flag(struct i2c_client *i2c,
 		struct palmas_platform_data *pdata)
 {
+	struct irq_data *irq_data = irq_get_irq_data(i2c->irq);
+	if (!irq_data) {
+		dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq);
+		return -EINVAL;
+	}
+
+	pdata->irq_flags = irqd_get_trigger_type(irq_data);
+	dev_info(&i2c->dev, "Irq flag is 0x%08x\n", pdata->irq_flags);
+	return 0;
+}
+
+static void palmas_dt_to_pdata(struct i2c_client *i2c,
+		struct palmas_platform_data *pdata)
+{
+	struct device_node *node = i2c->dev.of_node;
 	int ret;
 	u32 prop;
 
@@ -283,6 +298,8 @@
 		pdata->power_ctrl = PALMAS_POWER_CTRL_NSLEEP_MASK |
 					PALMAS_POWER_CTRL_ENABLE1_MASK |
 					PALMAS_POWER_CTRL_ENABLE2_MASK;
+	if (i2c->irq)
+		palmas_set_pdata_irq_flag(i2c, pdata);
 }
 
 static int palmas_i2c_probe(struct i2c_client *i2c,
@@ -304,7 +321,7 @@
 		if (!pdata)
 			return -ENOMEM;
 
-		palmas_dt_to_pdata(node, pdata);
+		palmas_dt_to_pdata(i2c, pdata);
 	}
 
 	if (!pdata)
@@ -344,6 +361,19 @@
 		}
 	}
 
+	/* Change interrupt line output polarity */
+	if (pdata->irq_flags & IRQ_TYPE_LEVEL_HIGH)
+		reg = PALMAS_POLARITY_CTRL_INT_POLARITY;
+	else
+		reg = 0;
+	ret = palmas_update_bits(palmas, PALMAS_PU_PD_OD_BASE,
+			PALMAS_POLARITY_CTRL, PALMAS_POLARITY_CTRL_INT_POLARITY,
+			reg);
+	if (ret < 0) {
+		dev_err(palmas->dev, "POLARITY_CTRL updat failed: %d\n", ret);
+		goto err;
+	}
+
 	/* Change IRQ into clear on read mode for efficiency */
 	slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE);
 	addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL);
@@ -352,7 +382,7 @@
 	regmap_write(palmas->regmap[slave], addr, reg);
 
 	ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
-			IRQF_ONESHOT | IRQF_TRIGGER_LOW, 0, &palmas_irq_chip,
+			IRQF_ONESHOT | pdata->irq_flags, 0, &palmas_irq_chip,
 			&palmas->irq_data);
 	if (ret < 0)
 		goto err;
diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
index 4658b5b..aeb8e40 100644
--- a/drivers/mfd/tps65912-core.c
+++ b/drivers/mfd/tps65912-core.c
@@ -169,6 +169,7 @@
 void tps65912_device_exit(struct tps65912 *tps65912)
 {
 	mfd_remove_devices(tps65912->dev);
+	tps65912_irq_exit(tps65912);
 	kfree(tps65912);
 }
 
diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c
index e16edca..d2ab222 100644
--- a/drivers/mfd/twl4030-audio.c
+++ b/drivers/mfd/twl4030-audio.c
@@ -118,7 +118,7 @@
  * Disable the resource.
  * The function returns with error or the content of the register
  */
-int twl4030_audio_disable_resource(unsigned id)
+int twl4030_audio_disable_resource(enum twl4030_audio_res id)
 {
 	struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev);
 	int val;
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 88ff9dc..942b666 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -800,7 +800,7 @@
 
 static struct platform_driver twl4030_madc_driver = {
 	.probe = twl4030_madc_probe,
-	.remove = __exit_p(twl4030_madc_remove),
+	.remove = twl4030_madc_remove,
 	.driver = {
 		   .name = "twl4030_madc",
 		   .owner = THIS_MODULE,
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index 192cf08..57b4519 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -947,12 +947,13 @@
 			   unsigned int *data)
 {
 	struct comedi_dt9812 *devpriv = dev->private;
+	unsigned int channel = CR_CHAN(insn->chanspec);
 	int n;
 	u8 bits = 0;
 
 	dt9812_digital_in(devpriv->slot, &bits);
 	for (n = 0; n < insn->n; n++)
-		data[n] = ((1 << insn->chanspec) & bits) != 0;
+		data[n] = ((1 << channel) & bits) != 0;
 	return n;
 }
 
@@ -961,12 +962,13 @@
 			   unsigned int *data)
 {
 	struct comedi_dt9812 *devpriv = dev->private;
+	unsigned int channel = CR_CHAN(insn->chanspec);
 	int n;
 	u8 bits = 0;
 
 	dt9812_digital_out_shadow(devpriv->slot, &bits);
 	for (n = 0; n < insn->n; n++) {
-		u8 mask = 1 << insn->chanspec;
+		u8 mask = 1 << channel;
 
 		bits &= ~mask;
 		if (data[n])
@@ -981,13 +983,13 @@
 			   unsigned int *data)
 {
 	struct comedi_dt9812 *devpriv = dev->private;
+	unsigned int channel = CR_CHAN(insn->chanspec);
 	int n;
 
 	for (n = 0; n < insn->n; n++) {
 		u16 value = 0;
 
-		dt9812_analog_in(devpriv->slot, insn->chanspec, &value,
-				 DT9812_GAIN_1);
+		dt9812_analog_in(devpriv->slot, channel, &value, DT9812_GAIN_1);
 		data[n] = value;
 	}
 	return n;
@@ -998,12 +1000,13 @@
 			   unsigned int *data)
 {
 	struct comedi_dt9812 *devpriv = dev->private;
+	unsigned int channel = CR_CHAN(insn->chanspec);
 	int n;
 	u16 value;
 
 	for (n = 0; n < insn->n; n++) {
 		value = 0;
-		dt9812_analog_out_shadow(devpriv->slot, insn->chanspec, &value);
+		dt9812_analog_out_shadow(devpriv->slot, channel, &value);
 		data[n] = value;
 	}
 	return n;
@@ -1014,10 +1017,11 @@
 			   unsigned int *data)
 {
 	struct comedi_dt9812 *devpriv = dev->private;
+	unsigned int channel = CR_CHAN(insn->chanspec);
 	int n;
 
 	for (n = 0; n < insn->n; n++)
-		dt9812_analog_out(devpriv->slot, insn->chanspec, data[n]);
+		dt9812_analog_out(devpriv->slot, channel, data[n]);
 	return n;
 }
 
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 1a0062a..6aac1f6 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -730,10 +730,14 @@
 static int usbduxsub_start(struct usbduxsub *usbduxsub)
 {
 	int errcode = 0;
-	uint8_t local_transfer_buffer[16];
+	uint8_t *local_transfer_buffer;
+
+	local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+	if (!local_transfer_buffer)
+		return -ENOMEM;
 
 	/* 7f92 to zero */
-	local_transfer_buffer[0] = 0;
+	*local_transfer_buffer = 0;
 	errcode = usb_control_msg(usbduxsub->usbdev,
 				  /* create a pipe for a control transfer */
 				  usb_sndctrlpipe(usbduxsub->usbdev, 0),
@@ -751,22 +755,25 @@
 				  1,
 				  /* Timeout */
 				  BULK_TIMEOUT);
-	if (errcode < 0) {
+	if (errcode < 0)
 		dev_err(&usbduxsub->interface->dev,
 			"comedi_: control msg failed (start)\n");
-		return errcode;
-	}
-	return 0;
+
+	kfree(local_transfer_buffer);
+	return errcode;
 }
 
 static int usbduxsub_stop(struct usbduxsub *usbduxsub)
 {
 	int errcode = 0;
+	uint8_t *local_transfer_buffer;
 
-	uint8_t local_transfer_buffer[16];
+	local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+	if (!local_transfer_buffer)
+		return -ENOMEM;
 
 	/* 7f92 to one */
-	local_transfer_buffer[0] = 1;
+	*local_transfer_buffer = 1;
 	errcode = usb_control_msg(usbduxsub->usbdev,
 				  usb_sndctrlpipe(usbduxsub->usbdev, 0),
 				  /* bRequest, "Firmware" */
@@ -781,12 +788,12 @@
 				  1,
 				  /* Timeout */
 				  BULK_TIMEOUT);
-	if (errcode < 0) {
+	if (errcode < 0)
 		dev_err(&usbduxsub->interface->dev,
 			"comedi_: control msg failed (stop)\n");
-		return errcode;
-	}
-	return 0;
+
+	kfree(local_transfer_buffer);
+	return errcode;
 }
 
 static int usbduxsub_upload(struct usbduxsub *usbduxsub,
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 4bf5dd0..1ba0e3d 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -436,10 +436,14 @@
 static int usbduxfastsub_start(struct usbduxfastsub_s *udfs)
 {
 	int ret;
-	unsigned char local_transfer_buffer[16];
+	unsigned char *local_transfer_buffer;
+
+	local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+	if (!local_transfer_buffer)
+		return -ENOMEM;
 
 	/* 7f92 to zero */
-	local_transfer_buffer[0] = 0;
+	*local_transfer_buffer = 0;
 	/* bRequest, "Firmware" */
 	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
 			      USBDUXFASTSUB_FIRMWARE,
@@ -450,22 +454,25 @@
 			      local_transfer_buffer,
 			      1,      /* Length */
 			      EZTIMEOUT);    /* Timeout */
-	if (ret < 0) {
+	if (ret < 0)
 		dev_err(&udfs->interface->dev,
 			"control msg failed (start)\n");
-		return ret;
-	}
 
-	return 0;
+	kfree(local_transfer_buffer);
+	return ret;
 }
 
 static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs)
 {
 	int ret;
-	unsigned char local_transfer_buffer[16];
+	unsigned char *local_transfer_buffer;
+
+	local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+	if (!local_transfer_buffer)
+		return -ENOMEM;
 
 	/* 7f92 to one */
-	local_transfer_buffer[0] = 1;
+	*local_transfer_buffer = 1;
 	/* bRequest, "Firmware" */
 	ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
 			      USBDUXFASTSUB_FIRMWARE,
@@ -474,13 +481,12 @@
 			      0x0000,	/* Index */
 			      local_transfer_buffer, 1,	/* Length */
 			      EZTIMEOUT);	/* Timeout */
-	if (ret < 0) {
+	if (ret < 0)
 		dev_err(&udfs->interface->dev,
 			"control msg failed (stop)\n");
-		return ret;
-	}
 
-	return 0;
+	kfree(local_transfer_buffer);
+	return ret;
 }
 
 static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs,
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index d066351..a728c8f 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -681,7 +681,11 @@
 static int usbduxsub_start(struct usbduxsub *usbduxsub)
 {
 	int errcode = 0;
-	uint8_t local_transfer_buffer[16];
+	uint8_t *local_transfer_buffer;
+
+	local_transfer_buffer = kmalloc(16, GFP_KERNEL);
+	if (!local_transfer_buffer)
+		return -ENOMEM;
 
 	/* 7f92 to zero */
 	local_transfer_buffer[0] = 0;
@@ -702,19 +706,22 @@
 				  1,
 				  /* Timeout */
 				  BULK_TIMEOUT);
-	if (errcode < 0) {
+	if (errcode < 0)
 		dev_err(&usbduxsub->interface->dev,
 			"comedi_: control msg failed (start)\n");
-		return errcode;
-	}
-	return 0;
+
+	kfree(local_transfer_buffer);
+	return errcode;
 }
 
 static int usbduxsub_stop(struct usbduxsub *usbduxsub)
 {
 	int errcode = 0;
+	uint8_t *local_transfer_buffer;
 
-	uint8_t local_transfer_buffer[16];
+	local_transfer_buffer = kmalloc(16, GFP_KERNEL);
+	if (!local_transfer_buffer)
+		return -ENOMEM;
 
 	/* 7f92 to one */
 	local_transfer_buffer[0] = 1;
@@ -732,12 +739,12 @@
 				  1,
 				  /* Timeout */
 				  BULK_TIMEOUT);
-	if (errcode < 0) {
+	if (errcode < 0)
 		dev_err(&usbduxsub->interface->dev,
 			"comedi_: control msg failed (stop)\n");
-		return errcode;
-	}
-	return 0;
+
+	kfree(local_transfer_buffer);
+	return errcode;
 }
 
 static int usbduxsub_upload(struct usbduxsub *usbduxsub,
diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c
index 4b3a019..b028b0d 100644
--- a/drivers/staging/imx-drm/ipuv3-crtc.c
+++ b/drivers/staging/imx-drm/ipuv3-crtc.c
@@ -483,17 +483,6 @@
 		goto err_out;
 	}
 
-	ipu_crtc->irq = ipu_idmac_channel_irq(ipu, ipu_crtc->ipu_ch,
-			IPU_IRQ_EOF);
-	ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0,
-			"imx_drm", ipu_crtc);
-	if (ret < 0) {
-		dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret);
-		goto err_out;
-	}
-
-	disable_irq(ipu_crtc->irq);
-
 	return 0;
 err_out:
 	ipu_put_resources(ipu_crtc);
@@ -504,6 +493,7 @@
 static int ipu_crtc_init(struct ipu_crtc *ipu_crtc,
 		struct ipu_client_platformdata *pdata)
 {
+	struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
 	int ret;
 
 	ret = ipu_get_resources(ipu_crtc, pdata);
@@ -522,6 +512,17 @@
 		goto err_put_resources;
 	}
 
+	ipu_crtc->irq = ipu_idmac_channel_irq(ipu, ipu_crtc->ipu_ch,
+			IPU_IRQ_EOF);
+	ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0,
+			"imx_drm", ipu_crtc);
+	if (ret < 0) {
+		dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret);
+		goto err_put_resources;
+	}
+
+	disable_irq(ipu_crtc->irq);
+
 	return 0;
 
 err_put_resources:
diff --git a/drivers/staging/tidspbridge/rmgr/drv.c b/drivers/staging/tidspbridge/rmgr/drv.c
index db1da28..be26917 100644
--- a/drivers/staging/tidspbridge/rmgr/drv.c
+++ b/drivers/staging/tidspbridge/rmgr/drv.c
@@ -76,37 +76,28 @@
 	struct node_res_object **node_res_obj =
 	    (struct node_res_object **)node_resource;
 	struct process_context *ctxt = (struct process_context *)process_ctxt;
-	int status = 0;
 	int retval;
 
 	*node_res_obj = kzalloc(sizeof(struct node_res_object), GFP_KERNEL);
-	if (!*node_res_obj) {
-		status = -ENOMEM;
-		goto func_end;
-	}
+	if (!*node_res_obj)
+		return -ENOMEM;
 
 	(*node_res_obj)->node = hnode;
-	retval = idr_get_new(ctxt->node_id, *node_res_obj,
-						&(*node_res_obj)->id);
-	if (retval == -EAGAIN) {
-		if (!idr_pre_get(ctxt->node_id, GFP_KERNEL)) {
-			pr_err("%s: OUT OF MEMORY\n", __func__);
-			status = -ENOMEM;
-			goto func_end;
-		}
-
-		retval = idr_get_new(ctxt->node_id, *node_res_obj,
-						&(*node_res_obj)->id);
+	retval = idr_alloc(ctxt->node_id, *node_res_obj, 0, 0, GFP_KERNEL);
+	if (retval >= 0) {
+		(*node_res_obj)->id = retval;
+		return 0;
 	}
-	if (retval) {
+
+	kfree(*node_res_obj);
+
+	if (retval == -ENOSPC) {
 		pr_err("%s: FAILED, IDR is FULL\n", __func__);
-		status = -EFAULT;
+		return -EFAULT;
+	} else {
+		pr_err("%s: OUT OF MEMORY\n", __func__);
+		return -ENOMEM;
 	}
-func_end:
-	if (status)
-		kfree(*node_res_obj);
-
-	return status;
 }
 
 /* Release all Node resources and its context
@@ -201,35 +192,26 @@
 	struct strm_res_object **pstrm_res =
 	    (struct strm_res_object **)strm_res;
 	struct process_context *ctxt = (struct process_context *)process_ctxt;
-	int status = 0;
 	int retval;
 
 	*pstrm_res = kzalloc(sizeof(struct strm_res_object), GFP_KERNEL);
-	if (*pstrm_res == NULL) {
-		status = -EFAULT;
-		goto func_end;
-	}
+	if (*pstrm_res == NULL)
+		return -EFAULT;
 
 	(*pstrm_res)->stream = stream_obj;
-	retval = idr_get_new(ctxt->stream_id, *pstrm_res,
-						&(*pstrm_res)->id);
-	if (retval == -EAGAIN) {
-		if (!idr_pre_get(ctxt->stream_id, GFP_KERNEL)) {
-			pr_err("%s: OUT OF MEMORY\n", __func__);
-			status = -ENOMEM;
-			goto func_end;
-		}
-
-		retval = idr_get_new(ctxt->stream_id, *pstrm_res,
-						&(*pstrm_res)->id);
+	retval = idr_alloc(ctxt->stream_id, *pstrm_res, 0, 0, GFP_KERNEL);
+	if (retval >= 0) {
+		(*pstrm_res)->id = retval;
+		return 0;
 	}
-	if (retval) {
+
+	if (retval == -ENOSPC) {
 		pr_err("%s: FAILED, IDR is FULL\n", __func__);
-		status = -EPERM;
+		return -EPERM;
+	} else {
+		pr_err("%s: OUT OF MEMORY\n", __func__);
+		return -ENOMEM;
 	}
-
-func_end:
-	return status;
 }
 
 static int drv_proc_free_strm_res(int id, void *p, void *process_ctxt)
diff --git a/drivers/staging/vt6656/card.c b/drivers/staging/vt6656/card.c
index 22918a1..d2479b7 100644
--- a/drivers/staging/vt6656/card.c
+++ b/drivers/staging/vt6656/card.c
@@ -790,7 +790,7 @@
 	if ((~uLowNextTBTT) < uLowRemain)
 		qwTSF = ((qwTSF >> 32) + 1) << 32;
 
-	qwTSF = (qwTSF & 0xffffffff00000000UL) |
+	qwTSF = (qwTSF & 0xffffffff00000000ULL) |
 		(u64)(uLowNextTBTT + uLowRemain);
 
     return (qwTSF);
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index d5f53e1..a5063a6 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -669,8 +669,6 @@
 	if (device->flags & DEVICE_FLAGS_OPENED)
 		device_close(device->dev);
 
-	usb_put_dev(interface_to_usbdev(intf));
-
 	return 0;
 }
 
@@ -681,8 +679,6 @@
 	if (!device || !device->dev)
 		return -ENODEV;
 
-	usb_get_dev(interface_to_usbdev(intf));
-
 	if (!(device->flags & DEVICE_FLAGS_OPENED))
 		device_open(device->dev);
 
diff --git a/drivers/staging/zcache/ramster/tcp.c b/drivers/staging/zcache/ramster/tcp.c
index aa2a1a7..f6e1e52 100644
--- a/drivers/staging/zcache/ramster/tcp.c
+++ b/drivers/staging/zcache/ramster/tcp.c
@@ -300,27 +300,22 @@
 
 static int r2net_prep_nsw(struct r2net_node *nn, struct r2net_status_wait *nsw)
 {
-	int ret = 0;
+	int ret;
 
-	do {
-		if (!idr_pre_get(&nn->nn_status_idr, GFP_ATOMIC)) {
-			ret = -EAGAIN;
-			break;
-		}
-		spin_lock(&nn->nn_lock);
-		ret = idr_get_new(&nn->nn_status_idr, nsw, &nsw->ns_id);
-		if (ret == 0)
-			list_add_tail(&nsw->ns_node_item,
-				      &nn->nn_status_list);
-		spin_unlock(&nn->nn_lock);
-	} while (ret == -EAGAIN);
+	spin_lock(&nn->nn_lock);
+	ret = idr_alloc(&nn->nn_status_idr, nsw, 0, 0, GFP_ATOMIC);
+	if (ret >= 0) {
+		nsw->ns_id = ret;
+		list_add_tail(&nsw->ns_node_item, &nn->nn_status_list);
+	}
+	spin_unlock(&nn->nn_lock);
 
-	if (ret == 0)  {
+	if (ret >= 0) {
 		init_waitqueue_head(&nsw->ns_wq);
 		nsw->ns_sys_status = R2NET_ERR_NONE;
 		nsw->ns_status = 0;
+		return 0;
 	}
-
 	return ret;
 }
 
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 0efc815..cf6a538 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -301,7 +301,28 @@
 	},
 	[PORT_8250_CIR] = {
 		.name		= "CIR port"
-	}
+	},
+	[PORT_ALTR_16550_F32] = {
+		.name		= "Altera 16550 FIFO32",
+		.fifo_size	= 32,
+		.tx_loadsz	= 32,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
+	[PORT_ALTR_16550_F64] = {
+		.name		= "Altera 16550 FIFO64",
+		.fifo_size	= 64,
+		.tx_loadsz	= 64,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
+	[PORT_ALTR_16550_F128] = {
+		.name		= "Altera 16550 FIFO128",
+		.fifo_size	= 128,
+		.tx_loadsz	= 128,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
 };
 
 /* Uart divisor latch read */
@@ -3396,3 +3417,32 @@
 MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
 #endif
 MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+
+#ifndef MODULE
+/* This module was renamed to 8250_core in 3.7.  Keep the old "8250" name
+ * working as well for the module options so we don't break people.  We
+ * need to keep the names identical and the convenient macros will happily
+ * refuse to let us do that by failing the build with redefinition errors
+ * of global variables.  So we stick them inside a dummy function to avoid
+ * those conflicts.  The options still get parsed, and the redefined
+ * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive.
+ *
+ * This is hacky.  I'm sorry.
+ */
+static void __used s8250_options(void)
+{
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "8250."
+
+	module_param_cb(share_irqs, &param_ops_uint, &share_irqs, 0644);
+	module_param_cb(nr_uarts, &param_ops_uint, &nr_uarts, 0644);
+	module_param_cb(skip_txen_test, &param_ops_uint, &skip_txen_test, 0644);
+#ifdef CONFIG_SERIAL_8250_RSA
+	__module_param_call(MODULE_PARAM_PREFIX, probe_rsa,
+		&param_array_ops, .arr = &__param_arr_probe_rsa,
+		0444, -1);
+#endif
+}
+#else
+MODULE_ALIAS("8250");
+#endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 791c5a7..aa76825 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1571,6 +1571,7 @@
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588	0x1588
 
 /*
  * Master list of serial port init/setup/exit quirks.
@@ -1852,15 +1853,6 @@
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_PLX,
-		.device		= PCI_DEVICE_ID_PLX_9050,
-		.subvendor	= PCI_VENDOR_ID_PLX,
-		.subdevice	= PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
-		.init		= pci_plx9050_init,
-		.setup		= pci_default_setup,
-		.exit		= pci_plx9050_exit,
-	},
-	{
-		.vendor		= PCI_VENDOR_ID_PLX,
 		.device		= PCI_DEVICE_ID_PLX_ROMULUS,
 		.subvendor	= PCI_VENDOR_ID_PLX,
 		.subdevice	= PCI_DEVICE_ID_PLX_ROMULUS,
@@ -3733,7 +3725,12 @@
 	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
 		PCI_VENDOR_ID_PLX,
 		PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
-		pbn_b0_4_115200 },
+		pbn_b2_4_115200 },
+	/* Unknown card - subdevice 0x1588 */
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_VENDOR_ID_PLX,
+		PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0,
+		pbn_b2_8_115200 },
 	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
 		PCI_SUBVENDOR_ID_KEYSPAN,
 		PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
@@ -4791,6 +4788,10 @@
 		PCI_VENDOR_ID_IBM, 0x0299,
 		0, 0, pbn_b0_bt_2_115200 },
 
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+		0x1000, 0x0012,
+		0, 0, pbn_b0_bt_2_115200 },
+
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
 		0xA000, 0x1000,
 		0, 0, pbn_b0_1_115200 },
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 35d9ab9..b3455a9 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -429,6 +429,7 @@
 {
 	struct uart_8250_port uart;
 	int ret, line, flags = dev_id->driver_data;
+	struct resource *res = NULL;
 
 	if (flags & UNKNOWN_DEV) {
 		ret = serial_pnp_guess_board(dev);
@@ -439,11 +440,12 @@
 	memset(&uart, 0, sizeof(uart));
 	if (pnp_irq_valid(dev, 0))
 		uart.port.irq = pnp_irq(dev, 0);
-	if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
-		uart.port.iobase = pnp_port_start(dev, 2);
-		uart.port.iotype = UPIO_PORT;
-	} else if (pnp_port_valid(dev, 0)) {
-		uart.port.iobase = pnp_port_start(dev, 0);
+	if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
+		res = pnp_get_resource(dev, IORESOURCE_IO, 2);
+	else if (pnp_port_valid(dev, 0))
+		res = pnp_get_resource(dev, IORESOURCE_IO, 0);
+	if (pnp_resource_enabled(res)) {
+		uart.port.iobase = res->start;
 		uart.port.iotype = UPIO_PORT;
 	} else if (pnp_mem_valid(dev, 0)) {
 		uart.port.mapbase = pnp_mem_start(dev, 0);
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index cf9210d..7e7006f 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -211,14 +211,14 @@
 config SERIAL_SAMSUNG_UARTS_4
 	bool
 	depends on PLAT_SAMSUNG
-	default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
+	default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
 	help
 	  Internal node for the common case of 4 Samsung compatible UARTs
 
 config SERIAL_SAMSUNG_UARTS
 	int
 	depends on PLAT_SAMSUNG
-	default 6 if ARCH_S5P6450
+	default 6 if CPU_S5P6450
 	default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
 	default 3
 	help
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 719594e..52a3ecd 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -235,7 +235,7 @@
  */
 static void bcm_uart_do_rx(struct uart_port *port)
 {
-	struct tty_port *port = &port->state->port;
+	struct tty_port *tty_port = &port->state->port;
 	unsigned int max_count;
 
 	/* limit number of char read in interrupt, should not be
@@ -260,7 +260,7 @@
 			bcm_uart_writel(port, val, UART_CTL_REG);
 
 			port->icount.overrun++;
-			tty_insert_flip_char(port, 0, TTY_OVERRUN);
+			tty_insert_flip_char(tty_port, 0, TTY_OVERRUN);
 		}
 
 		if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
@@ -299,11 +299,11 @@
 
 
 		if ((cstat & port->ignore_status_mask) == 0)
-			tty_insert_flip_char(port, c, flag);
+			tty_insert_flip_char(tty_port, c, flag);
 
 	} while (--max_count);
 
-	tty_flip_buffer_push(port);
+	tty_flip_buffer_push(tty_port);
 }
 
 /*
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index c0e1fad..018bad9 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -550,7 +550,7 @@
 		return 0;
 
 	psc_num = (port->mapbase & 0xf00) >> 8;
-	snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num);
+	snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num);
 	psc_clk = clk_get(port->dev, clk_name);
 	if (IS_ERR(psc_clk)) {
 		dev_err(port->dev, "Failed to get PSC clock entry!\n");
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index d587460..b025d54 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -241,6 +241,12 @@
 	{ .compatible = "ns16850",  .data = (void *)PORT_16850, },
 	{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
 	{ .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
+	{ .compatible = "altr,16550-FIFO32",
+		.data = (void *)PORT_ALTR_16550_F32, },
+	{ .compatible = "altr,16550-FIFO64",
+		.data = (void *)PORT_ALTR_16550_F64, },
+	{ .compatible = "altr,16550-FIFO128",
+		.data = (void *)PORT_ALTR_16550_F128, },
 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
 	{ .compatible = "ibm,qpace-nwp-serial",
 		.data = (void *)PORT_NWPSERIAL, },
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index a3f9dd5..705240e 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -611,14 +611,7 @@
 	vt8500_port->uart.dev = &pdev->dev;
 	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 
-	vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
-	if (!IS_ERR(vt8500_port->clk)) {
-		vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
-	} else {
-		/* use the default of 24Mhz if not specified and warn */
-		pr_warn("%s: serial clock source not specified\n", __func__);
-		vt8500_port->uart.uartclk = 24000000;
-	}
+	vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
 
 	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
 		 "VT8500 UART%d", pdev->id);
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index bb11993..578aa75 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -425,7 +425,7 @@
 	struct tty_ldisc *disc;
 
 	tty = port->itty;
-	if (WARN_RATELIMIT(tty == NULL, "tty is NULL\n"))
+	if (tty == NULL)
 		return;
 
 	disc = tty_ldisc_ref(tty);
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index f5ed3d7..8f5ebce 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -46,7 +46,7 @@
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
-obj-$(CONFIG_USB_COMMON)	+= phy/
+obj-$(CONFIG_USB_OTG_UTILS)	+= phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
index a03fbc1..aa49162 100644
--- a/drivers/usb/c67x00/c67x00-sched.c
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -100,7 +100,7 @@
 #define TD_PIDEP_OFFSET		0x04
 #define TD_PIDEPMASK_PID	0xF0
 #define TD_PIDEPMASK_EP		0x0F
-#define TD_PORTLENMASK_DL	0x02FF
+#define TD_PORTLENMASK_DL	0x03FF
 #define TD_PORTLENMASK_PN	0xC000
 
 #define TD_STATUS_OFFSET	0x07
@@ -590,7 +590,7 @@
 {
 	struct c67x00_td *td;
 	struct c67x00_urb_priv *urbp = urb->hcpriv;
-	const __u8 active_flag = 1, retry_cnt = 1;
+	const __u8 active_flag = 1, retry_cnt = 3;
 	__u8 cmd = 0;
 	int tt = 0;
 
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 2f45bba..f64fbea 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1767,7 +1767,7 @@
 		goto put_transceiver;
 	}
 
-	retval = dbg_create_files(&ci->gadget.dev);
+	retval = dbg_create_files(ci->dev);
 	if (retval)
 		goto unreg_device;
 
@@ -1796,7 +1796,7 @@
 
 	dev_err(dev, "error = %i\n", retval);
 remove_dbg:
-	dbg_remove_files(&ci->gadget.dev);
+	dbg_remove_files(ci->dev);
 unreg_device:
 	device_unregister(&ci->gadget.dev);
 put_transceiver:
@@ -1836,7 +1836,7 @@
 		if (ci->global_phy)
 			usb_put_phy(ci->transceiver);
 	}
-	dbg_remove_files(&ci->gadget.dev);
+	dbg_remove_files(ci->dev);
 	device_unregister(&ci->gadget.dev);
 	/* my kobject is dynamic, I swear! */
 	memset(&ci->gadget, 0, sizeof(ci->gadget));
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 5f0cb41..122d056 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -56,6 +56,7 @@
 #define WDM_RESPONDING		7
 #define WDM_SUSPENDING		8
 #define WDM_RESETTING		9
+#define WDM_OVERFLOW		10
 
 #define WDM_MAX			16
 
@@ -155,6 +156,7 @@
 {
 	struct wdm_device *desc = urb->context;
 	int status = urb->status;
+	int length = urb->actual_length;
 
 	spin_lock(&desc->iuspin);
 	clear_bit(WDM_RESPONDING, &desc->flags);
@@ -185,9 +187,17 @@
 	}
 
 	desc->rerr = status;
-	desc->reslength = urb->actual_length;
-	memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
-	desc->length += desc->reslength;
+	if (length + desc->length > desc->wMaxCommand) {
+		/* The buffer would overflow */
+		set_bit(WDM_OVERFLOW, &desc->flags);
+	} else {
+		/* we may already be in overflow */
+		if (!test_bit(WDM_OVERFLOW, &desc->flags)) {
+			memmove(desc->ubuf + desc->length, desc->inbuf, length);
+			desc->length += length;
+			desc->reslength = length;
+		}
+	}
 skip_error:
 	wake_up(&desc->wait);
 
@@ -435,6 +445,11 @@
 			rv = -ENODEV;
 			goto err;
 		}
+		if (test_bit(WDM_OVERFLOW, &desc->flags)) {
+			clear_bit(WDM_OVERFLOW, &desc->flags);
+			rv = -ENOBUFS;
+			goto err;
+		}
 		i++;
 		if (file->f_flags & O_NONBLOCK) {
 			if (!test_bit(WDM_READ, &desc->flags)) {
@@ -478,6 +493,7 @@
 			spin_unlock_irq(&desc->iuspin);
 			goto retry;
 		}
+
 		if (!desc->reslength) { /* zero length read */
 			dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
 			clear_bit(WDM_READ, &desc->flags);
@@ -1004,6 +1020,7 @@
 	struct wdm_device *desc = wdm_find_device(intf);
 	int rv;
 
+	clear_bit(WDM_OVERFLOW, &desc->flags);
 	clear_bit(WDM_RESETTING, &desc->flags);
 	rv = recover_from_urb_loss(desc);
 	mutex_unlock(&desc->wlock);
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9999094..ffa6b00 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -583,6 +583,7 @@
 		break;
 	}
 
+	dwc3_free_event_buffers(dwc);
 	dwc3_core_exit(dwc);
 
 	return 0;
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index b50da53..b082bec 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -23,8 +23,6 @@
 #include <linux/usb/nop-usb-xceiv.h>
 #include <linux/of.h>
 
-#include "core.h"
-
 struct dwc3_exynos {
 	struct platform_device	*dwc3;
 	struct platform_device	*usb2_phy;
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 22f337f..afa05e3 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -54,8 +54,6 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/nop-usb-xceiv.h>
 
-#include "core.h"
-
 /*
  * All these registers belong to OMAP's Wrapper around the
  * DesignWare USB3 Core.
@@ -465,20 +463,20 @@
 	return 0;
 }
 
-static const struct of_device_id of_dwc3_matach[] = {
+static const struct of_device_id of_dwc3_match[] = {
 	{
 		"ti,dwc3",
 	},
 	{ },
 };
-MODULE_DEVICE_TABLE(of, of_dwc3_matach);
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
 
 static struct platform_driver dwc3_omap_driver = {
 	.probe		= dwc3_omap_probe,
 	.remove		= dwc3_omap_remove,
 	.driver		= {
 		.name	= "omap-dwc3",
-		.of_match_table	= of_dwc3_matach,
+		.of_match_table	= of_dwc3_match,
 	},
 };
 
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 7d70f44..e8d7768 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -45,8 +45,6 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/nop-usb-xceiv.h>
 
-#include "core.h"
-
 /* FIXME define these in <linux/pci_ids.h> */
 #define PCI_VENDOR_ID_SYNOPSYS		0x16c3
 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3	0xabcd
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index d7da073..1d139ca 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -891,7 +891,8 @@
 				DWC3_TRBCTL_CONTROL_DATA);
 	} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
 			&& (dep->number == 0)) {
-		u32		transfer_size;
+		u32	transfer_size;
+		u32	maxpacket;
 
 		ret = usb_gadget_map_request(&dwc->gadget, &req->request,
 				dep->number);
@@ -902,8 +903,8 @@
 
 		WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE);
 
-		transfer_size = roundup(req->request.length,
-				(u32) dep->endpoint.maxpacket);
+		maxpacket = dep->endpoint.maxpacket;
+		transfer_size = roundup(req->request.length, maxpacket);
 
 		dwc->ep0_bounced = true;
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a04342f..82e160e 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2159,7 +2159,6 @@
 
 static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 {
-	struct dwc3_gadget_ep_cmd_params params;
 	struct dwc3_ep		*dep;
 	int			ret;
 	u32			reg;
@@ -2167,8 +2166,6 @@
 
 	dev_vdbg(dwc->dev, "%s\n", __func__);
 
-	memset(&params, 0x00, sizeof(params));
-
 	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 	speed = reg & DWC3_DSTS_CONNECTSPD;
 	dwc->speed = speed;
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 97a13c3..82fb225 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -35,6 +35,12 @@
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
 obj-$(CONFIG_USB_MV_U3D)	+= mv_u3d_core.o
 
+# USB Functions
+obj-$(CONFIG_USB_F_ACM)		+= f_acm.o
+f_ss_lb-y			:= f_loopback.o f_sourcesink.o
+obj-$(CONFIG_USB_F_SS_LB)	+= f_ss_lb.o
+obj-$(CONFIG_USB_U_SERIAL)	+= u_serial.o
+
 #
 # USB gadget drivers
 #
@@ -74,9 +80,3 @@
 obj-$(CONFIG_USB_G_NCM)		+= g_ncm.o
 obj-$(CONFIG_USB_G_ACM_MS)	+= g_acm_ms.o
 obj-$(CONFIG_USB_GADGET_TARGET)	+= tcm_usb_gadget.o
-
-# USB Functions
-obj-$(CONFIG_USB_F_ACM)		+= f_acm.o
-f_ss_lb-y			:= f_loopback.o f_sourcesink.o
-obj-$(CONFIG_USB_F_SS_LB)	+= f_ss_lb.o
-obj-$(CONFIG_USB_U_SERIAL)	+= u_serial.o
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 7c821de..c0d62b2 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1757,10 +1757,7 @@
 /**
  * usb_composite_probe() - register a composite driver
  * @driver: the driver to register
- * @bind: the callback used to allocate resources that are shared across the
- *	whole device, such as string IDs, and add its configurations using
- *	@usb_add_config().  This may fail by returning a negative errno
- *	value; it should return zero on successful initialization.
+ *
  * Context: single threaded during gadget setup
  *
  * This function is used to register drivers using the composite driver
diff --git a/drivers/usb/gadget/f_uac1.c b/drivers/usb/gadget/f_uac1.c
index f570e66..fa8ea4e 100644
--- a/drivers/usb/gadget/f_uac1.c
+++ b/drivers/usb/gadget/f_uac1.c
@@ -418,6 +418,7 @@
 
 	req->context = audio;
 	req->complete = f_audio_complete;
+	len = min_t(size_t, sizeof(value), len);
 	memcpy(req->buf, &value, len);
 
 	return len;
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 8efd7555..5bd930d 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1334,27 +1334,18 @@
 		struct usb_gadget_driver *driver)
 {
 	struct imx_udc_struct *imx_usb;
-	int retval;
 
 	imx_usb = container_of(gadget, struct imx_udc_struct, gadget);
 	/* first hook up the driver ... */
 	imx_usb->driver = driver;
 	imx_usb->gadget.dev.driver = &driver->driver;
 
-	retval = device_add(&imx_usb->gadget.dev);
-	if (retval)
-		goto fail;
-
 	D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n",
 		__func__, driver->driver.name);
 
 	imx_udc_enable(imx_usb);
 
 	return 0;
-fail:
-	imx_usb->driver = NULL;
-	imx_usb->gadget.dev.driver = NULL;
-	return retval;
 }
 
 static int imx_udc_stop(struct usb_gadget *gadget,
@@ -1370,8 +1361,6 @@
 	imx_usb->gadget.dev.driver = NULL;
 	imx_usb->driver = NULL;
 
-	device_del(&imx_usb->gadget.dev);
-
 	D_INI(imx_usb->dev, "<%s> unregistered gadget driver '%s'\n",
 		__func__, driver->driver.name);
 
@@ -1477,6 +1466,10 @@
 	imx_usb->gadget.dev.parent = &pdev->dev;
 	imx_usb->gadget.dev.dma_mask = pdev->dev.dma_mask;
 
+	ret = device_add(&imx_usb->gadget.dev);
+	if (retval)
+		goto fail4;
+
 	platform_set_drvdata(pdev, imx_usb);
 
 	usb_init_data(imx_usb);
@@ -1488,9 +1481,11 @@
 
 	ret = usb_add_gadget_udc(&pdev->dev, &imx_usb->gadget);
 	if (ret)
-		goto fail4;
+		goto fail5;
 
 	return 0;
+fail5:
+	device_unregister(&imx_usb->gadget.dev);
 fail4:
 	for (i = 0; i < IMX_USB_NB_EP + 1; i++)
 		free_irq(imx_usb->usbd_int[i], imx_usb);
@@ -1514,6 +1509,7 @@
 	int i;
 
 	usb_del_gadget_udc(&imx_usb->gadget);
+	device_unregister(&imx_usb->gadget.dev);
 	imx_udc_disable(imx_usb);
 	del_timer(&imx_usb->timer);
 
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 06be85c..f8445653 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -62,6 +62,7 @@
 #define	DRIVER_VERSION	"4 October 2004"
 
 #define OMAP_DMA_USB_W2FC_TX0		29
+#define OMAP_DMA_USB_W2FC_RX0		26
 
 /*
  * The OMAP UDC needs _very_ early endpoint setup:  before enabling the
@@ -1310,7 +1311,7 @@
 }
 
 static int omap_udc_start(struct usb_gadget *g,
-		struct usb_gadget_driver *driver)
+		struct usb_gadget_driver *driver);
 static int omap_udc_stop(struct usb_gadget *g,
 		struct usb_gadget_driver *driver);
 
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 2bbcdce..d0f3748 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -1266,13 +1266,6 @@
 	dev->gadget.dev.driver = &driver->driver;
 	dev->pullup = 1;
 
-	retval = device_add (&dev->gadget.dev);
-	if (retval) {
-		dev->driver = NULL;
-		dev->gadget.dev.driver = NULL;
-		return retval;
-	}
-
 	/* ... then enable host detection and ep0; and we're ready
 	 * for set_configuration as well as eventual disconnect.
 	 */
@@ -1310,6 +1303,10 @@
 	}
 	del_timer_sync(&dev->timer);
 
+	/* report disconnect; the driver is already quiesced */
+	if (driver)
+		driver->disconnect(&dev->gadget);
+
 	/* re-init driver-visible data structures */
 	udc_reinit(dev);
 }
@@ -1331,7 +1328,6 @@
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 
-	device_del (&dev->gadget.dev);
 	dump_state(dev);
 
 	return 0;
@@ -2146,6 +2142,13 @@
 	dev->gadget.dev.parent = &pdev->dev;
 	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
 
+	retval = device_add(&dev->gadget.dev);
+	if (retval) {
+		dev->driver = NULL;
+		dev->gadget.dev.driver = NULL;
+		goto err_device_add;
+	}
+
 	the_controller = dev;
 	platform_set_drvdata(pdev, dev);
 
@@ -2196,6 +2199,8 @@
 	free_irq(irq, dev);
 #endif
  err_irq1:
+	device_unregister(&dev->gadget.dev);
+ err_device_add:
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
@@ -2217,10 +2222,11 @@
 {
 	struct pxa25x_udc *dev = platform_get_drvdata(pdev);
 
-	usb_del_gadget_udc(&dev->gadget);
 	if (dev->driver)
 		return -EBUSY;
 
+	usb_del_gadget_udc(&dev->gadget);
+	device_unregister(&dev->gadget.dev);
 	dev->pullup = 0;
 	pullup(dev);
 
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index f7d2579..2fc8676 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1814,11 +1814,6 @@
 	udc->gadget.dev.driver = &driver->driver;
 	dplus_pullup(udc, 1);
 
-	retval = device_add(&udc->gadget.dev);
-	if (retval) {
-		dev_err(udc->dev, "device_add error %d\n", retval);
-		goto fail;
-	}
 	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		retval = otg_set_peripheral(udc->transceiver->otg,
 						&udc->gadget);
@@ -1876,7 +1871,6 @@
 
 	udc->driver = NULL;
 
-	device_del(&udc->gadget.dev);
 
 	if (!IS_ERR_OR_NULL(udc->transceiver))
 		return otg_set_peripheral(udc->transceiver->otg, NULL);
@@ -2480,13 +2474,24 @@
 			driver_name, udc->irq, retval);
 		goto err_irq;
 	}
+
+	retval = device_add(&udc->gadget.dev);
+	if (retval) {
+		dev_err(udc->dev, "device_add error %d\n", retval);
+		goto err_dev_add;
+	}
+
 	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (retval)
 		goto err_add_udc;
 
 	pxa_init_debugfs(udc);
+
 	return 0;
+
 err_add_udc:
+	device_unregister(&udc->gadget.dev);
+err_dev_add:
 	free_irq(udc->irq, udc);
 err_irq:
 	iounmap(udc->regs);
@@ -2507,6 +2512,7 @@
 	int gpio = udc->mach->gpio_pullup;
 
 	usb_del_gadget_udc(&udc->gadget);
+	device_del(&udc->gadget.dev);
 	usb_gadget_unregister_driver(udc->driver);
 	free_irq(udc->irq, udc);
 	pxa_cleanup_debugfs(udc);
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index fc07b43..08f8965 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1668,8 +1668,7 @@
 static int s3c2410_udc_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver)
 {
-	struct s3c2410_udc *udc = to_s3c2410(g)
-	int		retval;
+	struct s3c2410_udc *udc = to_s3c2410(g);
 
 	dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name);
 
@@ -1677,22 +1676,10 @@
 	udc->driver = driver;
 	udc->gadget.dev.driver = &driver->driver;
 
-	/* Bind the driver */
-	retval = device_add(&udc->gadget.dev);
-	if (retval) {
-		dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
-		goto register_error;
-	}
-
 	/* Enable udc */
 	s3c2410_udc_enable(udc);
 
 	return 0;
-
-register_error:
-	udc->driver = NULL;
-	udc->gadget.dev.driver = NULL;
-	return retval;
 }
 
 static int s3c2410_udc_stop(struct usb_gadget *g,
@@ -1700,7 +1687,6 @@
 {
 	struct s3c2410_udc *udc = to_s3c2410(g);
 
-	device_del(&udc->gadget.dev);
 	udc->driver = NULL;
 
 	/* Disable udc */
@@ -1842,6 +1828,13 @@
 	udc->gadget.dev.parent = &pdev->dev;
 	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
 
+	/* Bind the driver */
+	retval = device_add(&udc->gadget.dev);
+	if (retval) {
+		dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
+		goto err_device_add;
+	}
+
 	the_controller = udc;
 	platform_set_drvdata(pdev, udc);
 
@@ -1930,6 +1923,8 @@
 err_int:
 	free_irq(IRQ_USBD, udc);
 err_map:
+	device_unregister(&udc->gadget.dev);
+err_device_add:
 	iounmap(base_addr);
 err_mem:
 	release_mem_region(rsrc_start, rsrc_len);
@@ -1947,10 +1942,11 @@
 
 	dev_dbg(&pdev->dev, "%s()\n", __func__);
 
-	usb_del_gadget_udc(&udc->gadget);
 	if (udc->driver)
 		return -EBUSY;
 
+	usb_del_gadget_udc(&udc->gadget);
+	device_unregister(&udc->gadget.dev);
 	debugfs_remove(udc->regs_info);
 
 	if (udc_info && !udc_info->udc_command &&
diff --git a/drivers/usb/gadget/u_uac1.c b/drivers/usb/gadget/u_uac1.c
index e0c5e88..c7d460f 100644
--- a/drivers/usb/gadget/u_uac1.c
+++ b/drivers/usb/gadget/u_uac1.c
@@ -240,8 +240,11 @@
 	snd = &card->playback;
 	snd->filp = filp_open(fn_play, O_WRONLY, 0);
 	if (IS_ERR(snd->filp)) {
+		int ret = PTR_ERR(snd->filp);
+
 		ERROR(card, "No such PCM playback device: %s\n", fn_play);
 		snd->filp = NULL;
+		return ret;
 	}
 	pcm_file = snd->filp->private_data;
 	snd->substream = pcm_file->substream;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b416a3f..5726cb1 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -748,11 +748,9 @@
 		/* guard against (alleged) silicon errata */
 		if (cmd & CMD_IAAD)
 			ehci_dbg(ehci, "IAA with IAAD still set?\n");
-		if (ehci->async_iaa) {
+		if (ehci->async_iaa)
 			COUNT(ehci->stats.iaa);
-			end_unlink_async(ehci);
-		} else
-			ehci_dbg(ehci, "IAA with nothing unlinked?\n");
+		end_unlink_async(ehci);
 	}
 
 	/* remote wakeup [4.3.1] */
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index fd252f0..5464665 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -135,7 +135,7 @@
 		 * qtd is updated in qh_completions(). Update the QH
 		 * overlay here.
 		 */
-		if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+		if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
 			qh->hw->hw_qtd_next = qtd->hw_next;
 			qtd = NULL;
 		}
@@ -449,11 +449,19 @@
 			else if (last_status == -EINPROGRESS && !urb->unlinked)
 				continue;
 
-			/* qh unlinked; token in overlay may be most current */
-			if (state == QH_STATE_IDLE
-					&& cpu_to_hc32(ehci, qtd->qtd_dma)
-						== hw->hw_current) {
+			/*
+			 * If this was the active qtd when the qh was unlinked
+			 * and the overlay's token is active, then the overlay
+			 * hasn't been written back to the qtd yet so use its
+			 * token instead of the qtd's.  After the qtd is
+			 * processed and removed, the overlay won't be valid
+			 * any more.
+			 */
+			if (state == QH_STATE_IDLE &&
+					qh->qtd_list.next == &qtd->qtd_list &&
+					(hw->hw_token & ACTIVE_BIT(ehci))) {
 				token = hc32_to_cpu(ehci, hw->hw_token);
+				hw->hw_token &= ~ACTIVE_BIT(ehci);
 
 				/* An unlink may leave an incomplete
 				 * async transaction in the TT buffer.
@@ -1170,7 +1178,7 @@
 	struct ehci_qh		*prev;
 
 	/* Add to the end of the list of QHs waiting for the next IAAD */
-	qh->qh_state = QH_STATE_UNLINK;
+	qh->qh_state = QH_STATE_UNLINK_WAIT;
 	if (ehci->async_unlink)
 		ehci->async_unlink_last->unlink_next = qh;
 	else
@@ -1213,9 +1221,19 @@
 
 		/* Do only the first waiting QH (nVidia bug?) */
 		qh = ehci->async_unlink;
-		ehci->async_iaa = qh;
-		ehci->async_unlink = qh->unlink_next;
-		qh->unlink_next = NULL;
+
+		/*
+		 * Intel (?) bug: The HC can write back the overlay region
+		 * even after the IAA interrupt occurs.  In self-defense,
+		 * always go through two IAA cycles for each QH.
+		 */
+		if (qh->qh_state == QH_STATE_UNLINK_WAIT) {
+			qh->qh_state = QH_STATE_UNLINK;
+		} else {
+			ehci->async_iaa = qh;
+			ehci->async_unlink = qh->unlink_next;
+			qh->unlink_next = NULL;
+		}
 
 		/* Make sure the unlinks are all visible to the hardware */
 		wmb();
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 45b19e2..05e5143 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -7,11 +7,6 @@
 config USB_MUSB_HDRC
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	depends on USB && USB_GADGET
-	select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
-	select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX)
-	select TWL4030_USB if MACH_OMAP_3430SDP
-	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
-	select OMAP_CONTROL_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
 	help
 	  Say Y here if your system has a dual role high speed USB
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 60b41cc..daec6e0 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1624,8 +1624,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef CONFIG_SYSFS
-
 static ssize_t
 musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -1742,8 +1740,6 @@
 	.attrs = musb_attributes,
 };
 
-#endif	/* sysfs */
-
 /* Only used to provide driver mode change events */
 static void musb_irq_work(struct work_struct *data)
 {
@@ -1968,11 +1964,9 @@
 	if (status < 0)
 		goto fail4;
 
-#ifdef CONFIG_SYSFS
 	status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
 	if (status)
 		goto fail5;
-#endif
 
 	pm_runtime_put(musb->controller);
 
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 1762354..1a42a45 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -51,7 +51,7 @@
 };
 #define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
-struct omap2430_glue		*_glue;
+static struct omap2430_glue	*_glue;
 
 static struct timer_list musb_idle_timer;
 
@@ -237,9 +237,13 @@
 {
 	struct omap2430_glue	*glue = _glue;
 
-	if (glue && glue_to_musb(glue)) {
-		glue->status = status;
-	} else {
+	if (!glue) {
+		pr_err("%s: musb core is not yet initialized\n", __func__);
+		return;
+	}
+	glue->status = status;
+
+	if (!glue_to_musb(glue)) {
 		pr_err("%s: musb core is not yet ready\n", __func__);
 		return;
 	}
diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index e181439..2bd03d2 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -130,7 +130,7 @@
 	spin_lock_irqsave(&phy_lock, flags);
 
 	phy = __usb_find_phy(&phy_list, type);
-	if (IS_ERR(phy)) {
+	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
 		pr_err("unable to find transceiver of type %s\n",
 			usb_phy_type_string(type));
 		goto err0;
@@ -228,7 +228,7 @@
 	spin_lock_irqsave(&phy_lock, flags);
 
 	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
-	if (IS_ERR(phy)) {
+	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
 		pr_err("unable to find transceiver\n");
 		goto err0;
 	}
@@ -301,8 +301,12 @@
  */
 void usb_put_phy(struct usb_phy *x)
 {
-	if (x)
+	if (x) {
+		struct module *owner = x->dev->driver->owner;
+
 		put_device(x->dev);
+		module_put(owner);
+	}
 }
 EXPORT_SYMBOL(usb_put_phy);
 
diff --git a/drivers/usb/phy/omap-control-usb.c b/drivers/usb/phy/omap-control-usb.c
index 5323b71..1419ced 100644
--- a/drivers/usb/phy/omap-control-usb.c
+++ b/drivers/usb/phy/omap-control-usb.c
@@ -219,32 +219,26 @@
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 		"control_dev_conf");
-	control_usb->dev_conf = devm_request_and_ioremap(&pdev->dev, res);
-	if (!control_usb->dev_conf) {
-		dev_err(&pdev->dev, "Failed to obtain io memory\n");
-		return -EADDRNOTAVAIL;
-	}
+	control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(control_usb->dev_conf))
+		return PTR_ERR(control_usb->dev_conf);
 
 	if (control_usb->type == OMAP_CTRL_DEV_TYPE1) {
 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 			"otghs_control");
-		control_usb->otghs_control = devm_request_and_ioremap(
+		control_usb->otghs_control = devm_ioremap_resource(
 			&pdev->dev, res);
-		if (!control_usb->otghs_control) {
-			dev_err(&pdev->dev, "Failed to obtain io memory\n");
-			return -EADDRNOTAVAIL;
-		}
+		if (IS_ERR(control_usb->otghs_control))
+			return PTR_ERR(control_usb->otghs_control);
 	}
 
 	if (control_usb->type == OMAP_CTRL_DEV_TYPE2) {
 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 			"phy_power_usb");
-		control_usb->phy_power = devm_request_and_ioremap(
+		control_usb->phy_power = devm_ioremap_resource(
 			&pdev->dev, res);
-		if (!control_usb->phy_power) {
-			dev_dbg(&pdev->dev, "Failed to obtain io memory\n");
-			return -EADDRNOTAVAIL;
-		}
+		if (IS_ERR(control_usb->phy_power))
+			return PTR_ERR(control_usb->phy_power);
 
 		control_usb->sys_clk = devm_clk_get(control_usb->dev,
 			"sys_clkin");
diff --git a/drivers/usb/phy/omap-usb3.c b/drivers/usb/phy/omap-usb3.c
index fadc0c2..a6e60b1 100644
--- a/drivers/usb/phy/omap-usb3.c
+++ b/drivers/usb/phy/omap-usb3.c
@@ -212,11 +212,9 @@
 	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl");
-	phy->pll_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
-	if (!phy->pll_ctrl_base) {
-		dev_err(&pdev->dev, "ioremap of pll_ctrl failed\n");
-		return -ENOMEM;
-	}
+	phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(phy->pll_ctrl_base))
+		return PTR_ERR(phy->pll_ctrl_base);
 
 	phy->dev		= &pdev->dev;
 
diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
index 6ea5537..967101e 100644
--- a/drivers/usb/phy/samsung-usbphy.c
+++ b/drivers/usb/phy/samsung-usbphy.c
@@ -787,11 +787,9 @@
 		return -ENODEV;
 	}
 
-	phy_base = devm_request_and_ioremap(dev, phy_mem);
-	if (!phy_base) {
-		dev_err(dev, "%s: register mapping failed\n", __func__);
-		return -ENXIO;
-	}
+	phy_base = devm_ioremap_resource(dev, phy_mem);
+	if (IS_ERR(phy_base))
+		return PTR_ERR(phy_base);
 
 	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
 	if (!sphy)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index edc0f0d..4747d1c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -85,6 +85,7 @@
 	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+	{ USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
 	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
 	{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
@@ -150,6 +151,25 @@
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+	{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
+	{ USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
+	{ USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
+	{ USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
+	{ USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
+	{ USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
+	{ USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
+	{ USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
+	{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
+	{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
+	{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
 	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f7d339d..558adfc 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -341,6 +341,8 @@
 #define CINTERION_PRODUCT_EU3_E			0x0051
 #define CINTERION_PRODUCT_EU3_P			0x0052
 #define CINTERION_PRODUCT_PH8			0x0053
+#define CINTERION_PRODUCT_AH6			0x0055
+#define CINTERION_PRODUCT_PLS8			0x0060
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -579,6 +581,7 @@
 	{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
@@ -1260,6 +1263,8 @@
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, 
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 9b1b96f..31f81c3 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -69,6 +69,7 @@
 	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) },  /* NMEA */
 	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) },  /* WMC */
 	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) },  /* DIAG */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1fac, 0x0151, 0xff, 0xff, 0xff) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 2466254..59b32b7 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -197,12 +197,15 @@
 
 	if (is_gobi1k) {
 		/* Gobi 1K USB layout:
-		 * 0: serial port (doesn't respond)
+		 * 0: DM/DIAG (use libqcdm from ModemManager for communication)
 		 * 1: serial port (doesn't respond)
 		 * 2: AT-capable modem port
 		 * 3: QMI/net
 		 */
-		if (ifnum == 2)
+		if (ifnum == 0) {
+			dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
+			altsetting = 1;
+		} else if (ifnum == 2)
 			dev_dbg(dev, "Modem port found\n");
 		else
 			altsetting = -1;
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 00e6c9b..d643a4d 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -661,7 +661,9 @@
 						 __func__);
 					break;
 				}
-				tty_flip_buffer_push(&port->port);
+
+				if (port_priv->is_open)
+					tty_flip_buffer_push(&port->port);
 
 				newport = *(ch + 3);
 
@@ -704,7 +706,8 @@
 		tty_insert_flip_string(&port->port, ch, 1);
 	}
 
-	tty_flip_buffer_push(&port->port);
+	if (port_priv->is_open)
+		tty_flip_buffer_push(&port->port);
 }
 
 static void qt2_write_bulk_callback(struct urb *urb)
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 7ab9046..105d900 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -92,8 +92,8 @@
 	return 0;
 }
 
-/* This places the HUAWEI usb dongles in multi-port mode */
-static int usb_stor_huawei_feature_init(struct us_data *us)
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
 {
 	int result;
 
@@ -104,75 +104,3 @@
 	US_DEBUGP("Huawei mode set result is %d\n", result);
 	return 0;
 }
-
-/*
- * It will send a scsi switch command called rewind' to huawei dongle.
- * When the dongle receives this command at the first time,
- * it will reboot immediately. After rebooted, it will ignore this command.
- * So it is  unnecessary to read its response.
- */
-static int usb_stor_huawei_scsi_init(struct us_data *us)
-{
-	int result = 0;
-	int act_len = 0;
-	struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
-	char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
-			0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-	bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
-	bcbw->Tag = 0;
-	bcbw->DataTransferLength = 0;
-	bcbw->Flags = bcbw->Lun = 0;
-	bcbw->Length = sizeof(rewind_cmd);
-	memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
-	memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
-
-	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
-					US_BULK_CB_WRAP_LEN, &act_len);
-	US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
-	return result;
-}
-
-/*
- * It tries to find the supported Huawei USB dongles.
- * In Huawei, they assign the following product IDs
- * for all of their mobile broadband dongles,
- * including the new dongles in the future.
- * So if the product ID is not included in this list,
- * it means it is not Huawei's mobile broadband dongles.
- */
-static int usb_stor_huawei_dongles_pid(struct us_data *us)
-{
-	struct usb_interface_descriptor *idesc;
-	int idProduct;
-
-	idesc = &us->pusb_intf->cur_altsetting->desc;
-	idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
-	/* The first port is CDROM,
-	 * means the dongle in the single port mode,
-	 * and a switch command is required to be sent. */
-	if (idesc && idesc->bInterfaceNumber == 0) {
-		if ((idProduct == 0x1001)
-			|| (idProduct == 0x1003)
-			|| (idProduct == 0x1004)
-			|| (idProduct >= 0x1401 && idProduct <= 0x1500)
-			|| (idProduct >= 0x1505 && idProduct <= 0x1600)
-			|| (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
-			return 1;
-		}
-	}
-	return 0;
-}
-
-int usb_stor_huawei_init(struct us_data *us)
-{
-	int result = 0;
-
-	if (usb_stor_huawei_dongles_pid(us)) {
-		if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
-			result = usb_stor_huawei_scsi_init(us);
-		else
-			result = usb_stor_huawei_feature_init(us);
-	}
-	return result;
-}
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 5376d4f..529327f 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -46,5 +46,5 @@
  * flash reader */
 int usb_stor_ucr61s2b_init(struct us_data *us);
 
-/* This places the HUAWEI usb dongles in multi-port mode */
-int usb_stor_huawei_init(struct us_data *us);
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 72923b5..da04a07 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -53,6 +53,14 @@
  * as opposed to devices that do something strangely or wrongly.
  */
 
+/* In-kernel mode switching is deprecated.  Do not add new devices to
+ * this list for the sole purpose of switching them to a different
+ * mode.  Existing userspace solutions are superior.
+ *
+ * New mode switching devices should instead be added to the database
+ * maintained at http://www.draisberghof.de/usb_modeswitch/
+ */
+
 #if !defined(CONFIG_USB_STORAGE_SDDR09) && \
 		!defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
 #define NO_SDDR09
@@ -1527,10 +1535,335 @@
 /* Reported by fangxiaozhi <huananhu@huawei.com>
  * This brings the HUAWEI data card devices into multi-port mode
  */
-UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
+UNUSUAL_DEV(  0x12d1, 0x1001, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1003, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1004, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1401, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1402, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1403, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1404, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1405, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1406, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1407, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1408, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1409, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1410, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1411, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1412, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1413, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1414, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1415, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1416, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1417, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1418, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1419, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1420, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1421, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1422, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1423, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1424, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1425, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1426, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1427, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1428, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1429, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1430, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1431, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1432, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1433, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1434, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1435, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1436, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1437, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1438, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1439, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 
 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index d39dfa4..46d9701 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -47,11 +47,13 @@
 	return gpio_get_value(pdata->pin) ? 1 : 0;
 }
 
+#if defined(CONFIG_OF)
 static struct of_device_id w1_gpio_dt_ids[] = {
 	{ .compatible = "w1-gpio" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
+#endif
 
 static int w1_gpio_probe_dt(struct platform_device *pdev)
 {
@@ -158,7 +160,7 @@
 	return err;
 }
 
-static int __exit w1_gpio_remove(struct platform_device *pdev)
+static int w1_gpio_remove(struct platform_device *pdev)
 {
 	struct w1_bus_master *master = platform_get_drvdata(pdev);
 	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
@@ -210,7 +212,7 @@
 		.of_match_table = of_match_ptr(w1_gpio_dt_ids),
 	},
 	.probe = w1_gpio_probe,
-	.remove	= __exit_p(w1_gpio_remove),
+	.remove	= w1_gpio_remove,
 	.suspend = w1_gpio_suspend,
 	.resume = w1_gpio_resume,
 };
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 7994d933..7ce277d2b 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -924,7 +924,8 @@
 			tmp64 = (triplet_ret >> 2);
 			rn |= (tmp64 << i);
 
-			if (kthread_should_stop()) {
+			/* ensure we're called from kthread and not by netlink callback */
+			if (!dev->priv && kthread_should_stop()) {
 				mutex_unlock(&dev->bus_mutex);
 				dev_dbg(&dev->dev, "Abort w1_search\n");
 				return;
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 1a052c0..3cf8a15 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -777,6 +777,7 @@
 	.kill_sb = cifs_kill_sb,
 	/*  .fs_flags */
 };
+MODULE_ALIAS_FS("cifs");
 const struct inode_operations cifs_dir_inode_ops = {
 	.create = cifs_create,
 	.atomic_open = cifs_atomic_open,
diff --git a/fs/ext2/ialloc.c b/fs/ext2/ialloc.c
index 8f370e01..7cadd82 100644
--- a/fs/ext2/ialloc.c
+++ b/fs/ext2/ialloc.c
@@ -118,7 +118,6 @@
 	 * as writing the quota to disk may need the lock as well.
 	 */
 	/* Quota is already initialized in iput() */
-	ext2_xattr_delete_inode(inode);
 	dquot_free_inode(inode);
 	dquot_drop(inode);
 
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index c3881e5..fe60cc1 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -34,6 +34,7 @@
 #include "ext2.h"
 #include "acl.h"
 #include "xip.h"
+#include "xattr.h"
 
 static int __ext2_write_inode(struct inode *inode, int do_sync);
 
@@ -88,6 +89,7 @@
 		inode->i_size = 0;
 		if (inode->i_blocks)
 			ext2_truncate_blocks(inode, 0);
+		ext2_xattr_delete_inode(inode);
 	}
 
 	invalidate_inode_buffers(inode);
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 1d6e2ed..fb5120a 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -353,7 +353,7 @@
 	return bdev;
 
 fail:
-	ext3_msg(sb, "error: failed to open journal device %s: %ld",
+	ext3_msg(sb, KERN_ERR, "error: failed to open journal device %s: %ld",
 		__bdevname(dev, b), PTR_ERR(bdev));
 
 	return NULL;
@@ -887,7 +887,7 @@
 	/*todo: use simple_strtoll with >32bit ext3 */
 	sb_block = simple_strtoul(options, &options, 0);
 	if (*options && *options != ',') {
-		ext3_msg(sb, "error: invalid sb specification: %s",
+		ext3_msg(sb, KERN_ERR, "error: invalid sb specification: %s",
 		       (char *) *data);
 		return 1;
 	}
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 34e8552..b3818b4 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -91,6 +91,7 @@
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 MODULE_ALIAS_FS("ext2");
+MODULE_ALIAS("ext2");
 #define IS_EXT2_SB(sb) ((sb)->s_bdev->bd_holder == &ext2_fs_type)
 #else
 #define IS_EXT2_SB(sb) (0)
@@ -106,6 +107,7 @@
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 MODULE_ALIAS_FS("ext3");
+MODULE_ALIAS("ext3");
 #define IS_EXT3_SB(sb) ((sb)->s_bdev->bd_holder == &ext3_fs_type)
 #else
 #define IS_EXT3_SB(sb) (0)
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index 4550743..e37eb27 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -258,6 +258,7 @@
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 MODULE_ALIAS_FS("vxfs"); /* makes mount -t vxfs autoload the module */
+MODULE_ALIAS("vxfs");
 
 static int __init
 vxfs_init(void)
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 178b90c..0f6e52d 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -986,6 +986,7 @@
 	.kill_sb	= hostfs_kill_sb,
 	.fs_flags 	= 0,
 };
+MODULE_ALIAS_FS("hostfs");
 
 static int __init init_hostfs(void)
 {
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index a307622..a0617e7 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -688,6 +688,7 @@
 	.kill_sb	= kill_block_super,
 	.fs_flags	= FS_REQUIRES_DEV,
 };
+MODULE_ALIAS_FS("hpfs");
 
 static int __init init_hpfs_fs(void)
 {
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index a67f16e..d9b8aeb 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -1557,6 +1557,7 @@
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 MODULE_ALIAS_FS("iso9660");
+MODULE_ALIAS("iso9660");
 
 static int __init init_iso9660_fs(void)
 {
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 95cdcb2..2f8a29d 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -335,6 +335,7 @@
 	.fs_flags	= FS_RENAME_DOES_D_MOVE|FS_BINARY_MOUNTDATA,
 };
 MODULE_ALIAS_FS("nfs4");
+MODULE_ALIAS("nfs4");
 EXPORT_SYMBOL_GPL(nfs4_fs_type);
 
 static int __init register_nfs4_fs(void)
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 16d39c6..2e27430 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -230,37 +230,6 @@
 		__nfs4_file_put_access(fp, oflag);
 }
 
-static inline int get_new_stid(struct nfs4_stid *stid)
-{
-	static int min_stateid = 0;
-	struct idr *stateids = &stid->sc_client->cl_stateids;
-	int new_stid;
-	int error;
-
-	error = idr_get_new_above(stateids, stid, min_stateid, &new_stid);
-	/*
-	 * Note: the necessary preallocation was done in
-	 * nfs4_alloc_stateid().  The idr code caps the number of
-	 * preallocations that can exist at a time, but the state lock
-	 * prevents anyone from using ours before we get here:
-	 */
-	WARN_ON_ONCE(error);
-	/*
-	 * It shouldn't be a problem to reuse an opaque stateid value.
-	 * I don't think it is for 4.1.  But with 4.0 I worry that, for
-	 * example, a stray write retransmission could be accepted by
-	 * the server when it should have been rejected.  Therefore,
-	 * adopt a trick from the sctp code to attempt to maximize the
-	 * amount of time until an id is reused, by ensuring they always
-	 * "increase" (mod INT_MAX):
-	 */
-
-	min_stateid = new_stid+1;
-	if (min_stateid == INT_MAX)
-		min_stateid = 0;
-	return new_stid;
-}
-
 static struct nfs4_stid *nfs4_alloc_stid(struct nfs4_client *cl, struct
 kmem_cache *slab)
 {
@@ -273,9 +242,8 @@
 	if (!stid)
 		return NULL;
 
-	if (!idr_pre_get(stateids, GFP_KERNEL))
-		goto out_free;
-	if (idr_get_new_above(stateids, stid, min_stateid, &new_id))
+	new_id = idr_alloc(stateids, stid, min_stateid, 0, GFP_KERNEL);
+	if (new_id < 0)
 		goto out_free;
 	stid->sc_client = cl;
 	stid->sc_type = 0;
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 05ae3c9..3e64169 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -1439,8 +1439,11 @@
 			 * did a write before quota was turned on
 			 */
 			rsv = inode_get_rsv_space(inode);
-			if (unlikely(rsv))
+			if (unlikely(rsv)) {
+				spin_lock(&dq_data_lock);
 				dquot_resv_space(inode->i_dquot[cnt], rsv);
+				spin_unlock(&dq_data_lock);
+			}
 		}
 	}
 out_err:
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 194113b..f8a23c3 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1147,8 +1147,7 @@
 							 "on filesystem root.");
 					return 0;
 				}
-				qf_names[qtype] =
-				    kmalloc(strlen(arg) + 1, GFP_KERNEL);
+				qf_names[qtype] = kstrdup(arg, GFP_KERNEL);
 				if (!qf_names[qtype]) {
 					reiserfs_warning(s, "reiserfs-2502",
 							 "not enough memory "
@@ -1156,7 +1155,6 @@
 							 "quotafile name.");
 					return 0;
 				}
-				strcpy(qf_names[qtype], arg);
 				if (qtype == USRQUOTA)
 					*mount_options |= 1 << REISERFS_USRQUOTA;
 				else
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 260e392..60553a9 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -489,6 +489,7 @@
 	.kill_sb = kill_block_super,
 	.fs_flags = FS_REQUIRES_DEV
 };
+MODULE_ALIAS_FS("squashfs");
 
 static const struct super_operations squashfs_super_ops = {
 	.alloc_inode = squashfs_alloc_inode,
diff --git a/fs/sysv/super.c b/fs/sysv/super.c
index a39938b..d0c6a00 100644
--- a/fs/sysv/super.c
+++ b/fs/sysv/super.c
@@ -555,6 +555,7 @@
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 MODULE_ALIAS_FS("v7");
+MODULE_ALIAS("v7");
 
 static int __init init_sysv_fs(void)
 {
diff --git a/fs/udf/super.c b/fs/udf/super.c
index bc5b30a..9ac4057 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -118,6 +118,7 @@
 	.kill_sb	= kill_block_super,
 	.fs_flags	= FS_REQUIRES_DEV,
 };
+MODULE_ALIAS_FS("udf");
 
 static struct kmem_cache *udf_inode_cachep;
 
diff --git a/include/linux/idr.h b/include/linux/idr.h
index 8c1f81f..2640c7e 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -73,8 +73,6 @@
  */
 
 void *idr_find_slowpath(struct idr *idp, int id);
-int idr_pre_get(struct idr *idp, gfp_t gfp_mask);
-int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
 void idr_preload(gfp_t gfp_mask);
 int idr_alloc(struct idr *idp, void *ptr, int start, int end, gfp_t gfp_mask);
 int idr_for_each(struct idr *idp,
@@ -120,19 +118,6 @@
 }
 
 /**
- * idr_get_new - allocate new idr entry
- * @idp: idr handle
- * @ptr: pointer you want associated with the id
- * @id: pointer to the allocated handle
- *
- * Simple wrapper around idr_get_new_above() w/ @starting_id of zero.
- */
-static inline int idr_get_new(struct idr *idp, void *ptr, int *id)
-{
-	return idr_get_new_above(idp, ptr, 0, id);
-}
-
-/**
  * idr_for_each_entry - iterate over an idr's elements of a given type
  * @idp:     idr handle
  * @entry:   the type * to use as cursor
@@ -143,7 +128,56 @@
 	     entry != NULL;                                             \
 	     ++id, entry = (typeof(entry))idr_get_next((idp), &(id)))
 
-void __idr_remove_all(struct idr *idp);	/* don't use */
+/*
+ * Don't use the following functions.  These exist only to suppress
+ * deprecated warnings on EXPORT_SYMBOL()s.
+ */
+int __idr_pre_get(struct idr *idp, gfp_t gfp_mask);
+int __idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
+void __idr_remove_all(struct idr *idp);
+
+/**
+ * idr_pre_get - reserve resources for idr allocation
+ * @idp:	idr handle
+ * @gfp_mask:	memory allocation flags
+ *
+ * Part of old alloc interface.  This is going away.  Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_pre_get(struct idr *idp, gfp_t gfp_mask)
+{
+	return __idr_pre_get(idp, gfp_mask);
+}
+
+/**
+ * idr_get_new_above - allocate new idr entry above or equal to a start id
+ * @idp: idr handle
+ * @ptr: pointer you want associated with the id
+ * @starting_id: id to start search at
+ * @id: pointer to the allocated handle
+ *
+ * Part of old alloc interface.  This is going away.  Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_get_new_above(struct idr *idp, void *ptr,
+						 int starting_id, int *id)
+{
+	return __idr_get_new_above(idp, ptr, starting_id, id);
+}
+
+/**
+ * idr_get_new - allocate new idr entry
+ * @idp: idr handle
+ * @ptr: pointer you want associated with the id
+ * @id: pointer to the allocated handle
+ *
+ * Part of old alloc interface.  This is going away.  Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_get_new(struct idr *idp, void *ptr, int *id)
+{
+	return __idr_get_new_above(idp, ptr, 0, id);
+}
 
 /**
  * idr_remove_all - remove all ids from the given idr tree
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index 1f86a97..8bd12be 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -227,14 +227,17 @@
 };
 
 #ifdef CONFIG_IIO_BUFFER
+irqreturn_t st_sensors_trigger_handler(int irq, void *p);
+
+int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
+#endif
+
+#ifdef CONFIG_IIO_TRIGGER
 int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 				const struct iio_trigger_ops *trigger_ops);
 
 void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
 
-irqreturn_t st_sensors_trigger_handler(int irq, void *p);
-
-int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
 #else
 static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 				const struct iio_trigger_ops *trigger_ops)
diff --git a/include/linux/list.h b/include/linux/list.h
index d991cc1..6a1f8df 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -667,7 +667,9 @@
 	     pos = n)
 
 #define hlist_entry_safe(ptr, type, member) \
-	(ptr) ? hlist_entry(ptr, type, member) : NULL
+	({ typeof(ptr) ____ptr = (ptr); \
+	   ____ptr ? hlist_entry(____ptr, type, member) : NULL; \
+	})
 
 /**
  * hlist_for_each_entry	- iterate over list of given type
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index a4d13d7..3bbda22 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -221,6 +221,7 @@
 };
 
 struct palmas_platform_data {
+	int irq_flags;
 	int gpio_base;
 
 	/* bit value to be loaded to the POWER_CTRL register */
diff --git a/include/linux/mfd/tps65912.h b/include/linux/mfd/tps65912.h
index aaceab4..6d30903 100644
--- a/include/linux/mfd/tps65912.h
+++ b/include/linux/mfd/tps65912.h
@@ -323,5 +323,6 @@
 void tps65912_device_exit(struct tps65912 *tps65912);
 int tps65912_irq_init(struct tps65912 *tps65912, int irq,
 			struct tps65912_platform_data *pdata);
+int tps65912_irq_exit(struct tps65912 *tps65912);
 
 #endif /*  __LINUX_MFD_TPS65912_H */
diff --git a/include/linux/mfd/wm831x/auxadc.h b/include/linux/mfd/wm831x/auxadc.h
index b132067..867aa23 100644
--- a/include/linux/mfd/wm831x/auxadc.h
+++ b/include/linux/mfd/wm831x/auxadc.h
@@ -15,6 +15,8 @@
 #ifndef __MFD_WM831X_AUXADC_H__
 #define __MFD_WM831X_AUXADC_H__
 
+struct wm831x;
+
 /*
  * R16429 (0x402D) - AuxADC Data
  */
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index 4a3b83a..76c2264 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -20,6 +20,7 @@
 #include <linux/irqdomain.h>
 #include <linux/list.h>
 #include <linux/regmap.h>
+#include <linux/mfd/wm831x/auxadc.h>
 
 /*
  * Register values.
@@ -355,7 +356,6 @@
 };
 
 struct wm831x;
-enum wm831x_auxadc;
 
 typedef int (*wm831x_auxadc_read_fn)(struct wm831x *wm831x,
 				     enum wm831x_auxadc input);
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index e47ee46..71caed8 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -758,6 +758,7 @@
 extern void perf_event_disable(struct perf_event *event);
 extern int __perf_event_disable(void *info);
 extern void perf_event_task_tick(void);
+extern void perf_restore_debug_store(void);
 #else
 static inline void
 perf_event_task_sched_in(struct task_struct *prev,
@@ -797,6 +798,7 @@
 static inline void perf_event_disable(struct perf_event *event)		{ }
 static inline int __perf_event_disable(void *info)			{ return -1; }
 static inline void perf_event_task_tick(void)				{ }
+static inline void perf_restore_debug_store(void)			{ }
 #endif
 
 #define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x))
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index 5ae8456..c230994 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -14,6 +14,7 @@
  */
 
 #include <linux/cgroup.h>
+#include <linux/errno.h>
 
 /*
  * The core object. the cgroup that wishes to account for some
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 3c671c1..8860594 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -60,7 +60,7 @@
  * @name: For diagnostics, identifies the function.
  * @strings: tables of strings, keyed by identifiers assigned during bind()
  *	and by language IDs provided in control requests
- * @descriptors: Table of full (or low) speed descriptors, using interface and
+ * @fs_descriptors: Table of full (or low) speed descriptors, using interface and
  *	string identifiers assigned during @bind().  If this pointer is null,
  *	the function will not be available at full speed (or at low speed).
  * @hs_descriptors: Table of high speed descriptors, using interface and
@@ -290,6 +290,7 @@
  *	after function notifications
  * @resume: Notifies configuration when the host restarts USB traffic,
  *	before function notifications
+ * @gadget_driver: Gadget driver controlling this driver
  *
  * Devices default to reporting self powered operation.  Devices which rely
  * on bus powered operation should report this in their @bind method.
diff --git a/include/uapi/linux/acct.h b/include/uapi/linux/acct.h
index 11b6ca3..df2f9a0 100644
--- a/include/uapi/linux/acct.h
+++ b/include/uapi/linux/acct.h
@@ -107,10 +107,12 @@
 #define ACORE		0x08	/* ... dumped core */
 #define AXSIG		0x10	/* ... was killed by a signal */
 
-#ifdef __BIG_ENDIAN
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
 #define ACCT_BYTEORDER	0x80	/* accounting file is big endian */
-#else
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
 #define ACCT_BYTEORDER	0x00	/* accounting file is little endian */
+#else
+#error unspecified endianness
 #endif
 
 #ifndef __KERNEL__
diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h
index 86fa7a7..bb2554f 100644
--- a/include/uapi/linux/aio_abi.h
+++ b/include/uapi/linux/aio_abi.h
@@ -62,9 +62,9 @@
 	__s64		res2;		/* secondary result */
 };
 
-#if defined(__LITTLE_ENDIAN)
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
 #define PADDED(x,y)	x, y
-#elif defined(__BIG_ENDIAN)
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
 #define PADDED(x,y)	y, x
 #else
 #error edit for your odd byteorder.
diff --git a/include/uapi/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h
index ee75353..fe1a540 100644
--- a/include/uapi/linux/raid/md_p.h
+++ b/include/uapi/linux/raid/md_p.h
@@ -145,16 +145,18 @@
 	__u32 failed_disks;	/*  4 Number of failed disks		      */
 	__u32 spare_disks;	/*  5 Number of spare disks		      */
 	__u32 sb_csum;		/*  6 checksum of the whole superblock        */
-#ifdef __BIG_ENDIAN
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
 	__u32 events_hi;	/*  7 high-order of superblock update count   */
 	__u32 events_lo;	/*  8 low-order of superblock update count    */
 	__u32 cp_events_hi;	/*  9 high-order of checkpoint update count   */
 	__u32 cp_events_lo;	/* 10 low-order of checkpoint update count    */
-#else
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
 	__u32 events_lo;	/*  7 low-order of superblock update count    */
 	__u32 events_hi;	/*  8 high-order of superblock update count   */
 	__u32 cp_events_lo;	/*  9 low-order of checkpoint update count    */
 	__u32 cp_events_hi;	/* 10 high-order of checkpoint update count   */
+#else
+#error unspecified endianness
 #endif
 	__u32 recovery_cp;	/* 11 recovery checkpoint sector count	      */
 	/* There are only valid for minor_version > 90 */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index b6a23a4..74c2bf7 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -51,7 +51,10 @@
 #define PORT_8250_CIR	23	/* CIR infrared port, has its own driver */
 #define PORT_XR17V35X	24	/* Exar XR17V35x UARTs */
 #define PORT_BRCM_TRUMANAGE	25
-#define PORT_MAX_8250	25	/* max port ID */
+#define PORT_ALTR_16550_F32 26	/* Altera 16550 UART with 32 FIFOs */
+#define PORT_ALTR_16550_F64 27	/* Altera 16550 UART with 64 FIFOs */
+#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
+#define PORT_MAX_8250	28	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
diff --git a/init/Kconfig b/init/Kconfig
index 22616cd..5341d72 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -28,10 +28,6 @@
 
 menu "General setup"
 
-config EXPERIMENTAL
-	bool
-	default y
-
 config BROKEN
 	bool
 
diff --git a/kernel/fork.c b/kernel/fork.c
index 8d932b1..1766d32 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1141,6 +1141,9 @@
 	if ((clone_flags & (CLONE_NEWNS|CLONE_FS)) == (CLONE_NEWNS|CLONE_FS))
 		return ERR_PTR(-EINVAL);
 
+	if ((clone_flags & (CLONE_NEWUSER|CLONE_FS)) == (CLONE_NEWUSER|CLONE_FS))
+		return ERR_PTR(-EINVAL);
+
 	/*
 	 * Thread groups must share signals as well, and detached threads
 	 * can only be started up within the thread group.
@@ -1807,7 +1810,7 @@
 	 * If unsharing a user namespace must also unshare the thread.
 	 */
 	if (unshare_flags & CLONE_NEWUSER)
-		unshare_flags |= CLONE_THREAD;
+		unshare_flags |= CLONE_THREAD | CLONE_FS;
 	/*
 	 * If unsharing a pid namespace must also unshare the thread.
 	 */
diff --git a/kernel/signal.c b/kernel/signal.c
index d63c79e..dd72567 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -485,6 +485,9 @@
 		if (force_default || ka->sa.sa_handler != SIG_IGN)
 			ka->sa.sa_handler = SIG_DFL;
 		ka->sa.sa_flags = 0;
+#ifdef __ARCH_HAS_SA_RESTORER
+		ka->sa.sa_restorer = NULL;
+#endif
 		sigemptyset(&ka->sa.sa_mask);
 		ka++;
 	}
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index 8b65083..b14f4d3 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -21,6 +21,7 @@
 #include <linux/uaccess.h>
 #include <linux/ctype.h>
 #include <linux/projid.h>
+#include <linux/fs_struct.h>
 
 static struct kmem_cache *user_ns_cachep __read_mostly;
 
@@ -837,6 +838,9 @@
 	if (atomic_read(&current->mm->mm_users) > 1)
 		return -EINVAL;
 
+	if (current->fs->users != 1)
+		return -EINVAL;
+
 	if (!ns_capable(user_ns, CAP_SYS_ADMIN))
 		return -EPERM;
 
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 81f2457..55fac5b 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -457,11 +457,12 @@
 	int ret;
 
 	mutex_lock(&worker_pool_idr_mutex);
-	idr_pre_get(&worker_pool_idr, GFP_KERNEL);
-	ret = idr_get_new(&worker_pool_idr, pool, &pool->id);
+	ret = idr_alloc(&worker_pool_idr, pool, 0, 0, GFP_KERNEL);
+	if (ret >= 0)
+		pool->id = ret;
 	mutex_unlock(&worker_pool_idr_mutex);
 
-	return ret;
+	return ret < 0 ? ret : 0;
 }
 
 /*
diff --git a/lib/idr.c b/lib/idr.c
index 4f82a28..322e281 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -106,8 +106,14 @@
 	if (layer_idr)
 		return get_from_free_list(layer_idr);
 
-	/* try to allocate directly from kmem_cache */
-	new = kmem_cache_zalloc(idr_layer_cache, gfp_mask);
+	/*
+	 * Try to allocate directly from kmem_cache.  We want to try this
+	 * before preload buffer; otherwise, non-preloading idr_alloc()
+	 * users will end up taking advantage of preloading ones.  As the
+	 * following is allowed to fail for preloaded cases, suppress
+	 * warning this time.
+	 */
+	new = kmem_cache_zalloc(idr_layer_cache, gfp_mask | __GFP_NOWARN);
 	if (new)
 		return new;
 
@@ -115,18 +121,24 @@
 	 * Try to fetch one from the per-cpu preload buffer if in process
 	 * context.  See idr_preload() for details.
 	 */
-	if (in_interrupt())
-		return NULL;
-
-	preempt_disable();
-	new = __this_cpu_read(idr_preload_head);
-	if (new) {
-		__this_cpu_write(idr_preload_head, new->ary[0]);
-		__this_cpu_dec(idr_preload_cnt);
-		new->ary[0] = NULL;
+	if (!in_interrupt()) {
+		preempt_disable();
+		new = __this_cpu_read(idr_preload_head);
+		if (new) {
+			__this_cpu_write(idr_preload_head, new->ary[0]);
+			__this_cpu_dec(idr_preload_cnt);
+			new->ary[0] = NULL;
+		}
+		preempt_enable();
+		if (new)
+			return new;
 	}
-	preempt_enable();
-	return new;
+
+	/*
+	 * Both failed.  Try kmem_cache again w/o adding __GFP_NOWARN so
+	 * that memory allocation failure warning is printed as intended.
+	 */
+	return kmem_cache_zalloc(idr_layer_cache, gfp_mask);
 }
 
 static void idr_layer_rcu_free(struct rcu_head *head)
@@ -184,20 +196,7 @@
 	}
 }
 
-/**
- * idr_pre_get - reserve resources for idr allocation
- * @idp:	idr handle
- * @gfp_mask:	memory allocation flags
- *
- * This function should be called prior to calling the idr_get_new* functions.
- * It preallocates enough memory to satisfy the worst possible allocation. The
- * caller should pass in GFP_KERNEL if possible.  This of course requires that
- * no spinning locks be held.
- *
- * If the system is REALLY out of memory this function returns %0,
- * otherwise %1.
- */
-int idr_pre_get(struct idr *idp, gfp_t gfp_mask)
+int __idr_pre_get(struct idr *idp, gfp_t gfp_mask)
 {
 	while (idp->id_free_cnt < MAX_IDR_FREE) {
 		struct idr_layer *new;
@@ -208,7 +207,7 @@
 	}
 	return 1;
 }
-EXPORT_SYMBOL(idr_pre_get);
+EXPORT_SYMBOL(__idr_pre_get);
 
 /**
  * sub_alloc - try to allocate an id without growing the tree depth
@@ -375,25 +374,7 @@
 	idr_mark_full(pa, id);
 }
 
-/**
- * idr_get_new_above - allocate new idr entry above or equal to a start id
- * @idp: idr handle
- * @ptr: pointer you want associated with the id
- * @starting_id: id to start search at
- * @id: pointer to the allocated handle
- *
- * This is the allocate id function.  It should be called with any
- * required locks.
- *
- * If allocation from IDR's private freelist fails, idr_get_new_above() will
- * return %-EAGAIN.  The caller should retry the idr_pre_get() call to refill
- * IDR's preallocation and then retry the idr_get_new_above() call.
- *
- * If the idr is full idr_get_new_above() will return %-ENOSPC.
- *
- * @id returns a value in the range @starting_id ... %0x7fffffff
- */
-int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
+int __idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
 {
 	struct idr_layer *pa[MAX_IDR_LEVEL + 1];
 	int rv;
@@ -406,7 +387,7 @@
 	*id = rv;
 	return 0;
 }
-EXPORT_SYMBOL(idr_get_new_above);
+EXPORT_SYMBOL(__idr_get_new_above);
 
 /**
  * idr_preload - preload for idr_alloc()
@@ -907,7 +888,7 @@
 int ida_pre_get(struct ida *ida, gfp_t gfp_mask)
 {
 	/* allocate idr_layers */
-	if (!idr_pre_get(&ida->idr, gfp_mask))
+	if (!__idr_pre_get(&ida->idr, gfp_mask))
 		return 0;
 
 	/* allocate free_bitmap */
diff --git a/lib/xz/Kconfig b/lib/xz/Kconfig
index 82a04d7..08837db 100644
--- a/lib/xz/Kconfig
+++ b/lib/xz/Kconfig
@@ -15,7 +15,7 @@
 
 config XZ_DEC_POWERPC
 	bool "PowerPC BCJ filter decoder"
-	default y if POWERPC
+	default y if PPC
 	select XZ_DEC_BCJ
 
 config XZ_DEC_IA64
diff --git a/mm/fremap.c b/mm/fremap.c
index 0cd4c1148..4723ac8 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -129,7 +129,7 @@
 	struct vm_area_struct *vma;
 	int err = -EINVAL;
 	int has_write_lock = 0;
-	vm_flags_t vm_flags;
+	vm_flags_t vm_flags = 0;
 
 	if (prot)
 		return err;
@@ -254,7 +254,8 @@
 	 */
 
 out:
-	vm_flags = vma->vm_flags;
+	if (vma)
+		vm_flags = vma->vm_flags;
 	if (likely(!has_write_lock))
 		up_read(&mm->mmap_sem);
 	else
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index b81a367b..9597eec 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1801,7 +1801,7 @@
 	int retry = 1;
 
 	start_pfn = PFN_DOWN(start);
-	end_pfn = start_pfn + PFN_DOWN(size);
+	end_pfn = PFN_UP(start + size - 1);
 
 	/*
 	 * When CONFIG_MEMCG is on, one memory block may be used by other
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index a0f48a5..a9129f8 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -1175,6 +1175,7 @@
 	.kill_sb	= rpc_kill_sb,
 };
 MODULE_ALIAS_FS("rpc_pipefs");
+MODULE_ALIAS("rpc_pipefs");
 
 static void
 init_once(void *foo)
diff --git a/sound/core/seq/seq_timer.c b/sound/core/seq/seq_timer.c
index 160b1bd..24d44b2 100644
--- a/sound/core/seq/seq_timer.c
+++ b/sound/core/seq/seq_timer.c
@@ -290,10 +290,10 @@
 			tid.device = SNDRV_TIMER_GLOBAL_SYSTEM;
 			err = snd_timer_open(&t, str, &tid, q->queue);
 		}
-		if (err < 0) {
-			snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
-			return err;
-		}
+	}
+	if (err < 0) {
+		snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
+		return err;
 	}
 	t->callback = snd_seq_timer_interrupt;
 	t->callback_data = q;
diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c
index 30bcfe4..4ff60a6 100644
--- a/sound/oss/sequencer.c
+++ b/sound/oss/sequencer.c
@@ -545,6 +545,9 @@
 		case MIDI_PGM_CHANGE:
 			if (seq_mode == SEQ_2)
 			{
+				if (chn > 15)
+					break;
+
 				synth_devs[dev]->chn_info[chn].pgm_num = p1;
 				if ((int) dev >= num_synths)
 					synth_devs[dev]->set_instr(dev, chn, p1);
@@ -596,6 +599,9 @@
 		case MIDI_PITCH_BEND:
 			if (seq_mode == SEQ_2)
 			{
+				if (chn > 15)
+					break;
+
 				synth_devs[dev]->chn_info[chn].bender_value = w14;
 
 				if ((int) dev < num_synths)
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index 3536b07..0aabfed 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -2549,7 +2549,7 @@
 
 static int snd_card_asihpi_mixer_new(struct snd_card_asihpi *asihpi)
 {
-	struct snd_card *card = asihpi->card;
+	struct snd_card *card;
 	unsigned int idx = 0;
 	unsigned int subindex = 0;
 	int err;
@@ -2557,6 +2557,7 @@
 
 	if (snd_BUG_ON(!asihpi))
 		return -EINVAL;
+	card = asihpi->card;
 	strcpy(card->mixername, "Asihpi Mixer");
 
 	err =
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 97c68dd..a9ebcf9 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -494,7 +494,7 @@
 
 int snd_hda_get_num_raw_conns(struct hda_codec *codec, hda_nid_t nid)
 {
-	return get_num_conns(codec, nid) & AC_CLIST_LENGTH;
+	return snd_hda_get_raw_connections(codec, nid, NULL, 0);
 }
 
 /**
@@ -517,9 +517,6 @@
 	hda_nid_t prev_nid;
 	int null_count = 0;
 
-	if (snd_BUG_ON(!conn_list || max_conns <= 0))
-		return -EINVAL;
-
 	parm = get_num_conns(codec, nid);
 	if (!parm)
 		return 0;
@@ -545,7 +542,8 @@
 					  AC_VERB_GET_CONNECT_LIST, 0);
 		if (parm == -1 && codec->bus->rirb_error)
 			return -EIO;
-		conn_list[0] = parm & mask;
+		if (conn_list)
+			conn_list[0] = parm & mask;
 		return 1;
 	}
 
@@ -580,14 +578,20 @@
 				continue;
 			}
 			for (n = prev_nid + 1; n <= val; n++) {
-				if (conns >= max_conns)
-					return -ENOSPC;
-				conn_list[conns++] = n;
+				if (conn_list) {
+					if (conns >= max_conns)
+						return -ENOSPC;
+					conn_list[conns] = n;
+				}
+				conns++;
 			}
 		} else {
-			if (conns >= max_conns)
-				return -ENOSPC;
-			conn_list[conns++] = val;
+			if (conn_list) {
+				if (conns >= max_conns)
+					return -ENOSPC;
+				conn_list[conns] = val;
+			}
+			conns++;
 		}
 		prev_nid = val;
 	}
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index eefc456..0792b57 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -3239,7 +3239,7 @@
 	struct ca0132_spec *spec = codec->spec;
 	unsigned int tmp;
 
-	if (!dspload_is_loaded(codec))
+	if (spec->dsp_state != DSP_DOWNLOADED)
 		return 0;
 
 	/* if CrystalVoice if off, vipsource should be 0 */
@@ -4267,11 +4267,12 @@
  */
 static void ca0132_setup_defaults(struct hda_codec *codec)
 {
+	struct ca0132_spec *spec = codec->spec;
 	unsigned int tmp;
 	int num_fx;
 	int idx, i;
 
-	if (!dspload_is_loaded(codec))
+	if (spec->dsp_state != DSP_DOWNLOADED)
 		return;
 
 	/* out, in effects + voicefx */
@@ -4351,12 +4352,16 @@
 		return false;
 
 	dsp_os_image = (struct dsp_image_seg *)(fw_entry->data);
-	dspload_image(codec, dsp_os_image, 0, 0, true, 0);
+	if (dspload_image(codec, dsp_os_image, 0, 0, true, 0)) {
+		pr_err("ca0132 dspload_image failed.\n");
+		goto exit_download;
+	}
+
 	dsp_loaded = dspload_wait_loaded(codec);
 
+exit_download:
 	release_firmware(fw_entry);
 
-
 	return dsp_loaded;
 }
 
@@ -4367,16 +4372,13 @@
 #ifndef CONFIG_SND_HDA_CODEC_CA0132_DSP
 	return; /* NOP */
 #endif
-	spec->dsp_state = DSP_DOWNLOAD_INIT;
 
-	if (spec->dsp_state == DSP_DOWNLOAD_INIT) {
-		chipio_enable_clocks(codec);
-		spec->dsp_state = DSP_DOWNLOADING;
-		if (!ca0132_download_dsp_images(codec))
-			spec->dsp_state = DSP_DOWNLOAD_FAILED;
-		else
-			spec->dsp_state = DSP_DOWNLOADED;
-	}
+	chipio_enable_clocks(codec);
+	spec->dsp_state = DSP_DOWNLOADING;
+	if (!ca0132_download_dsp_images(codec))
+		spec->dsp_state = DSP_DOWNLOAD_FAILED;
+	else
+		spec->dsp_state = DSP_DOWNLOADED;
 
 	if (spec->dsp_state == DSP_DOWNLOADED)
 		ca0132_set_dsp_msr(codec, true);
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 72ebb8a..60d08f6 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -506,6 +506,8 @@
 	if (!spec)
 		return -ENOMEM;
 
+	spec->gen.automute_hook = cs_automute;
+
 	snd_hda_pick_fixup(codec, cs420x_models, cs420x_fixup_tbl,
 			   cs420x_fixups);
 	snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
@@ -893,6 +895,8 @@
 	if (!spec)
 		return -ENOMEM;
 
+	spec->gen.automute_hook = cs_automute;
+
 	snd_hda_pick_fixup(codec, cs421x_models, cs421x_fixup_tbl,
 			   cs421x_fixups);
 	snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 83d5335..dafe04a 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -815,6 +815,29 @@
 	return 0;
 }
 
+/* check whether a built-in speaker is included in parsed pins */
+static bool has_builtin_speaker(struct hda_codec *codec)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	hda_nid_t *nid_pin;
+	int nids, i;
+
+	if (spec->gen.autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT) {
+		nid_pin = spec->gen.autocfg.line_out_pins;
+		nids = spec->gen.autocfg.line_outs;
+	} else {
+		nid_pin = spec->gen.autocfg.speaker_pins;
+		nids = spec->gen.autocfg.speaker_outs;
+	}
+
+	for (i = 0; i < nids; i++) {
+		unsigned int def_conf = snd_hda_codec_get_pincfg(codec, nid_pin[i]);
+		if (snd_hda_get_input_pin_attr(def_conf) == INPUT_PIN_ATTR_INT)
+			return true;
+	}
+	return false;
+}
+
 /*
  * PC beep controls
  */
@@ -3890,6 +3913,12 @@
 		return err;
 	}
 
+	/* Don't GPIO-mute speakers if there are no internal speakers, because
+	 * the GPIO might be necessary for Headphone
+	 */
+	if (spec->eapd_switch && !has_builtin_speaker(codec))
+		spec->eapd_switch = 0;
+
 	codec->proc_widget_hook = stac92hd7x_proc_hook;
 
 	snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 803953a..2da8ad7 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -244,6 +244,21 @@
 			usb_ifnum_to_if(dev, ctrlif)->intf_assoc;
 
 		if (!assoc) {
+			/*
+			 * Firmware writers cannot count to three.  So to find
+			 * the IAD on the NuForce UDH-100, also check the next
+			 * interface.
+			 */
+			struct usb_interface *iface =
+				usb_ifnum_to_if(dev, ctrlif + 1);
+			if (iface &&
+			    iface->intf_assoc &&
+			    iface->intf_assoc->bFunctionClass == USB_CLASS_AUDIO &&
+			    iface->intf_assoc->bFunctionProtocol == UAC_VERSION_2)
+				assoc = iface->intf_assoc;
+		}
+
+		if (!assoc) {
 			snd_printk(KERN_ERR "Audio class v2 interfaces need an interface association\n");
 			return -EINVAL;
 		}
diff --git a/tools/usb/ffs-test.c b/tools/usb/ffs-test.c
index 8674b9e..fe1e66b 100644
--- a/tools/usb/ffs-test.c
+++ b/tools/usb/ffs-test.c
@@ -38,7 +38,7 @@
 #include <unistd.h>
 #include <tools/le_byteshift.h>
 
-#include "../../include/linux/usb/functionfs.h"
+#include "../../include/uapi/linux/usb/functionfs.h"
 
 
 /******************** Little Endian Handling ********************************/