diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 8b6a034..a5d6348 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -123,7 +123,7 @@
 	u32 reg = 0;
 
 	amd64_read_pci_cfg(pvt->F1, DCT_CFG_SEL, &reg);
-	reg &= 0xfffffffe;
+	reg &= (pvt->model >= 0x30) ? ~3 : ~1;
 	reg |= dct;
 	amd64_write_pci_cfg(pvt->F1, DCT_CFG_SEL, reg);
 }
@@ -133,8 +133,9 @@
 {
 	u8 dct  = 0;
 
+	/* For F15 M30h, the second dct is DCT 3, refer to BKDG Section 2.10 */
 	if (addr >= 0x140 && addr <= 0x1a0) {
-		dct   = 1;
+		dct   = (pvt->model >= 0x30) ? 3 : 1;
 		addr -= 0x100;
 	}
 
@@ -205,8 +206,10 @@
 	if (boot_cpu_data.x86 == 0xf)
 		min_scrubrate = 0x0;
 
-	/* F15h Erratum #505 */
-	if (boot_cpu_data.x86 == 0x15)
+	/* Erratum #505 for F15h Model 0x00 - Model 0x01, Stepping 0 */
+	if (boot_cpu_data.x86 == 0x15 &&
+		boot_cpu_data.x86_model <= 0x01 &&
+		boot_cpu_data.x86_mask < 0x1)
 		f15h_select_dct(pvt, 0);
 
 	return __amd64_set_scrub_rate(pvt->F3, bw, min_scrubrate);
@@ -218,8 +221,10 @@
 	u32 scrubval = 0;
 	int i, retval = -EINVAL;
 
-	/* F15h Erratum #505 */
-	if (boot_cpu_data.x86 == 0x15)
+	/* Erratum #505 for F15h Model 0x00 - Model 0x01, Stepping 0 */
+	if (boot_cpu_data.x86 == 0x15 &&
+		boot_cpu_data.x86_model <= 0x01 &&
+		boot_cpu_data.x86_mask < 0x1)
 		f15h_select_dct(pvt, 0);
 
 	amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
@@ -335,7 +340,7 @@
 	u64 csbase, csmask, base_bits, mask_bits;
 	u8 addr_shift;
 
-	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) {
+	if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) {
 		csbase		= pvt->csels[dct].csbases[csrow];
 		csmask		= pvt->csels[dct].csmasks[csrow];
 		base_bits	= GENMASK(21, 31) | GENMASK(9, 15);
@@ -343,10 +348,11 @@
 		addr_shift	= 4;
 
 	/*
-	* F16h needs two addr_shift values: 8 for high and 6 for low
-	* (cf. F16h BKDG).
-	*/
-	} else if (boot_cpu_data.x86 == 0x16) {
+	 * F16h and F15h, models 30h and later need two addr_shift values:
+	 * 8 for high and 6 for low (cf. F16h BKDG).
+	 */
+	} else if (pvt->fam == 0x16 ||
+		  (pvt->fam == 0x15 && pvt->model >= 0x30)) {
 		csbase          = pvt->csels[dct].csbases[csrow];
 		csmask          = pvt->csels[dct].csmasks[csrow >> 1];
 
@@ -736,13 +742,16 @@
 }
 
 /*
- * see BKDG, F2x[1,0][5C:40], F2[1,0][6C:60]
+ * See BKDG, F2x[1,0][5C:40], F2[1,0][6C:60]
  */
 static void prep_chip_selects(struct amd64_pvt *pvt)
 {
-	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) {
+	if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) {
 		pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
 		pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 8;
+	} else if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+		pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 4;
+		pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 2;
 	} else {
 		pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
 		pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 4;
@@ -916,15 +925,15 @@
 static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range)
 {
 	struct amd_northbridge *nb;
-	struct pci_dev *misc, *f1 = NULL;
-	struct cpuinfo_x86 *c = &boot_cpu_data;
+	struct pci_dev *f1 = NULL;
+	unsigned int pci_func;
 	int off = range << 3;
 	u32 llim;
 
 	amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off,  &pvt->ranges[range].base.lo);
 	amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo);
 
-	if (c->x86 == 0xf)
+	if (pvt->fam == 0xf)
 		return;
 
 	if (!dram_rw(pvt, range))
@@ -934,15 +943,17 @@
 	amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi);
 
 	/* F15h: factor in CC6 save area by reading dst node's limit reg */
-	if (c->x86 != 0x15)
+	if (pvt->fam != 0x15)
 		return;
 
 	nb = node_to_amd_nb(dram_dst_node(pvt, range));
 	if (WARN_ON(!nb))
 		return;
 
-	misc = nb->misc;
-	f1 = pci_get_related_function(misc->vendor, PCI_DEVICE_ID_AMD_15H_NB_F1, misc);
+	pci_func = (pvt->model == 0x30) ? PCI_DEVICE_ID_AMD_15H_M30H_NB_F1
+					: PCI_DEVICE_ID_AMD_15H_NB_F1;
+
+	f1 = pci_get_related_function(nb->misc->vendor, pci_func, nb->misc);
 	if (WARN_ON(!f1))
 		return;
 
@@ -1173,7 +1184,7 @@
 }
 
 /*
- * F16h has only limited cs_modes
+ * F16h and F15h model 30h have only limited cs_modes.
  */
 static int f16_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
 				unsigned cs_mode)
@@ -1218,6 +1229,29 @@
 }
 
 /*
+ * Determine channel (DCT) based on the interleaving mode (see F15h M30h BKDG,
+ * 2.10.12 Memory Interleaving Modes).
+ */
+static u8 f15_m30h_determine_channel(struct amd64_pvt *pvt, u64 sys_addr,
+				     u8 intlv_en, int num_dcts_intlv,
+				     u32 dct_sel)
+{
+	u8 channel = 0;
+	u8 select;
+
+	if (!(intlv_en))
+		return (u8)(dct_sel);
+
+	if (num_dcts_intlv == 2) {
+		select = (sys_addr >> 8) & 0x3;
+		channel = select ? 0x3 : 0;
+	} else if (num_dcts_intlv == 4)
+		channel = (sys_addr >> 8) & 0x7;
+
+	return channel;
+}
+
+/*
  * Determine channel (DCT) based on the interleaving mode: F10h BKDG, 2.8.9 Memory
  * Interleaving Modes.
  */
@@ -1366,6 +1400,10 @@
 			 (in_addr & cs_mask), (cs_base & cs_mask));
 
 		if ((in_addr & cs_mask) == (cs_base & cs_mask)) {
+			if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+				cs_found =  csrow;
+				break;
+			}
 			cs_found = f10_process_possible_spare(pvt, dct, csrow);
 
 			edac_dbg(1, " MATCH csrow=%d\n", cs_found);
@@ -1492,20 +1530,142 @@
 	return cs_found;
 }
 
-static int f1x_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
-				       int *chan_sel)
+static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range,
+					u64 sys_addr, int *chan_sel)
+{
+	int cs_found = -EINVAL;
+	int num_dcts_intlv = 0;
+	u64 chan_addr, chan_offset;
+	u64 dct_base, dct_limit;
+	u32 dct_cont_base_reg, dct_cont_limit_reg, tmp;
+	u8 channel, alias_channel, leg_mmio_hole, dct_sel, dct_offset_en;
+
+	u64 dhar_offset		= f10_dhar_offset(pvt);
+	u8 intlv_addr		= dct_sel_interleave_addr(pvt);
+	u8 node_id		= dram_dst_node(pvt, range);
+	u8 intlv_en		= dram_intlv_en(pvt, range);
+
+	amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &dct_cont_base_reg);
+	amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &dct_cont_limit_reg);
+
+	dct_offset_en		= (u8) ((dct_cont_base_reg >> 3) & BIT(0));
+	dct_sel			= (u8) ((dct_cont_base_reg >> 4) & 0x7);
+
+	edac_dbg(1, "(range %d) SystemAddr= 0x%llx Limit=0x%llx\n",
+		 range, sys_addr, get_dram_limit(pvt, range));
+
+	if (!(get_dram_base(pvt, range)  <= sys_addr) &&
+	    !(get_dram_limit(pvt, range) >= sys_addr))
+		return -EINVAL;
+
+	if (dhar_valid(pvt) &&
+	    dhar_base(pvt) <= sys_addr &&
+	    sys_addr < BIT_64(32)) {
+		amd64_warn("Huh? Address is in the MMIO hole: 0x%016llx\n",
+			    sys_addr);
+		return -EINVAL;
+	}
+
+	/* Verify sys_addr is within DCT Range. */
+	dct_base = (dct_sel_baseaddr(pvt) << 27);
+	dct_limit = (((dct_cont_limit_reg >> 11) & 0x1FFF) << 27) | 0x7FFFFFF;
+
+	if (!(dct_cont_base_reg & BIT(0)) &&
+	    !(dct_base <= sys_addr && dct_limit >= sys_addr))
+		return -EINVAL;
+
+	/* Verify number of dct's that participate in channel interleaving. */
+	num_dcts_intlv = (int) hweight8(intlv_en);
+
+	if (!(num_dcts_intlv % 2 == 0) || (num_dcts_intlv > 4))
+		return -EINVAL;
+
+	channel = f15_m30h_determine_channel(pvt, sys_addr, intlv_en,
+					     num_dcts_intlv, dct_sel);
+
+	/* Verify we stay within the MAX number of channels allowed */
+	if (channel > 4 || channel < 0)
+		return -EINVAL;
+
+	leg_mmio_hole = (u8) (dct_cont_base_reg >> 1 & BIT(0));
+
+	/* Get normalized DCT addr */
+	if (leg_mmio_hole && (sys_addr >= BIT_64(32)))
+		chan_offset = dhar_offset;
+	else
+		chan_offset = dct_base;
+
+	chan_addr = sys_addr - chan_offset;
+
+	/* remove channel interleave */
+	if (num_dcts_intlv == 2) {
+		if (intlv_addr == 0x4)
+			chan_addr = ((chan_addr >> 9) << 8) |
+						(chan_addr & 0xff);
+		else if (intlv_addr == 0x5)
+			chan_addr = ((chan_addr >> 10) << 9) |
+						(chan_addr & 0x1ff);
+		else
+			return -EINVAL;
+
+	} else if (num_dcts_intlv == 4) {
+		if (intlv_addr == 0x4)
+			chan_addr = ((chan_addr >> 10) << 8) |
+							(chan_addr & 0xff);
+		else if (intlv_addr == 0x5)
+			chan_addr = ((chan_addr >> 11) << 9) |
+							(chan_addr & 0x1ff);
+		else
+			return -EINVAL;
+	}
+
+	if (dct_offset_en) {
+		amd64_read_pci_cfg(pvt->F1,
+				   DRAM_CONT_HIGH_OFF + (int) channel * 4,
+				   &tmp);
+		chan_addr +=  ((tmp >> 11) & 0xfff) << 27;
+	}
+
+	f15h_select_dct(pvt, channel);
+
+	edac_dbg(1, "   Normalized DCT addr: 0x%llx\n", chan_addr);
+
+	/*
+	 * Find Chip select:
+	 * if channel = 3, then alias it to 1. This is because, in F15 M30h,
+	 * there is support for 4 DCT's, but only 2 are currently functional.
+	 * They are DCT0 and DCT3. But we have read all registers of DCT3 into
+	 * pvt->csels[1]. So we need to use '1' here to get correct info.
+	 * Refer F15 M30h BKDG Section 2.10 and 2.10.3 for clarifications.
+	 */
+	alias_channel =  (channel == 3) ? 1 : channel;
+
+	cs_found = f1x_lookup_addr_in_dct(chan_addr, node_id, alias_channel);
+
+	if (cs_found >= 0)
+		*chan_sel = alias_channel;
+
+	return cs_found;
+}
+
+static int f1x_translate_sysaddr_to_cs(struct amd64_pvt *pvt,
+					u64 sys_addr,
+					int *chan_sel)
 {
 	int cs_found = -EINVAL;
 	unsigned range;
 
 	for (range = 0; range < DRAM_RANGES; range++) {
-
 		if (!dram_rw(pvt, range))
 			continue;
 
-		if ((get_dram_base(pvt, range)  <= sys_addr) &&
-		    (get_dram_limit(pvt, range) >= sys_addr)) {
+		if (pvt->fam == 0x15 && pvt->model >= 0x30)
+			cs_found = f15_m30h_match_to_this_node(pvt, range,
+							       sys_addr,
+							       chan_sel);
 
+		else if ((get_dram_base(pvt, range)  <= sys_addr) &&
+			 (get_dram_limit(pvt, range) >= sys_addr)) {
 			cs_found = f1x_match_to_this_node(pvt, range,
 							  sys_addr, chan_sel);
 			if (cs_found >= 0)
@@ -1624,6 +1784,17 @@
 			.read_dct_pci_cfg	= f15_read_dct_pci_cfg,
 		}
 	},
+	[F15_M30H_CPUS] = {
+		.ctl_name = "F15h_M30h",
+		.f1_id = PCI_DEVICE_ID_AMD_15H_M30H_NB_F1,
+		.f3_id = PCI_DEVICE_ID_AMD_15H_M30H_NB_F3,
+		.ops = {
+			.early_channel_count	= f1x_early_channel_count,
+			.map_sysaddr_to_csrow	= f1x_map_sysaddr_to_csrow,
+			.dbam_to_cs		= f16_dbam_to_chip_select,
+			.read_dct_pci_cfg	= f15_read_dct_pci_cfg,
+		}
+	},
 	[F16_CPUS] = {
 		.ctl_name = "F16h",
 		.f1_id = PCI_DEVICE_ID_AMD_16H_NB_F1,
@@ -2387,10 +2558,13 @@
  */
 static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt)
 {
-	u8 fam = boot_cpu_data.x86;
 	struct amd64_family_type *fam_type = NULL;
 
-	switch (fam) {
+	pvt->ext_model  = boot_cpu_data.x86_model >> 4;
+	pvt->model	= boot_cpu_data.x86_model;
+	pvt->fam	= boot_cpu_data.x86;
+
+	switch (pvt->fam) {
 	case 0xf:
 		fam_type		= &amd64_family_types[K8_CPUS];
 		pvt->ops		= &amd64_family_types[K8_CPUS].ops;
@@ -2402,6 +2576,12 @@
 		break;
 
 	case 0x15:
+		if (pvt->model == 0x30) {
+			fam_type	= &amd64_family_types[F15_M30H_CPUS];
+			pvt->ops	= &amd64_family_types[F15_M30H_CPUS].ops;
+			break;
+		}
+
 		fam_type		= &amd64_family_types[F15_CPUS];
 		pvt->ops		= &amd64_family_types[F15_CPUS].ops;
 		break;
@@ -2416,10 +2596,8 @@
 		return NULL;
 	}
 
-	pvt->ext_model = boot_cpu_data.x86_model >> 4;
-
 	amd64_info("%s %sdetected (node %d).\n", fam_type->ctl_name,
-		     (fam == 0xf ?
+		     (pvt->fam == 0xf ?
 				(pvt->ext_model >= K8_REV_F  ? "revF or later "
 							     : "revE or earlier ")
 				 : ""), pvt->mc_node_id);
@@ -2638,6 +2816,14 @@
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_AMD,
+		.device		= PCI_DEVICE_ID_AMD_15H_M30H_NB_F2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.class		= 0,
+		.class_mask	= 0,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_AMD,
 		.device		= PCI_DEVICE_ID_AMD_16H_NB_F2,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,