libertas: support boot commands to write persistent firmware and bootloader
Add locking and non-locking versions of if_usb_prog_firmware to support
programming firmware after and before driver bring-up respectively. Add more
suitable error codes for firmware programming process. Add capability checks
for persistent features before attempting to use them.
Based on patches from Brajesh Dave and Priyank Singh.
Signed-off-by: Brian Cavagnolo <brian@cozybit.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 632c291..b5013ce 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -39,7 +39,10 @@
static void if_usb_receive(struct urb *urb);
static void if_usb_receive_fwload(struct urb *urb);
-static int if_usb_prog_firmware(struct if_usb_card *cardp);
+static int __if_usb_prog_firmware(struct if_usb_card *cardp,
+ const char *fwname, int cmd);
+static int if_usb_prog_firmware(struct if_usb_card *cardp,
+ const char *fwname, int cmd);
static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
uint8_t *payload, uint16_t nb);
static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
@@ -66,10 +69,10 @@
lbs_deb_usb2(&urb->dev->dev, "Actual length transmitted %d\n",
urb->actual_length);
- /* Used for both firmware TX and regular TX. priv isn't
- * valid at firmware load time.
+ /* Boot commands such as UPDATE_FW and UPDATE_BOOT2 are not
+ * passed up to the lbs level.
*/
- if (priv)
+ if (priv && priv->dnld_sent != DNLD_BOOTCMD_SENT)
lbs_host_to_card_done(priv);
} else {
/* print the failure status number for debug */
@@ -231,7 +234,7 @@
}
/* Upload firmware */
- if (if_usb_prog_firmware(cardp)) {
+ if (__if_usb_prog_firmware(cardp, lbs_fw_name, BOOT_CMD_FW_BY_USB)) {
lbs_deb_usbd(&udev->dev, "FW upload failed\n");
goto err_prog_firmware;
}
@@ -510,7 +513,7 @@
if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) {
kfree_skb(skb);
if_usb_submit_rx_urb_fwload(cardp);
- cardp->bootcmdresp = 1;
+ cardp->bootcmdresp = BOOT_CMD_RESP_OK;
lbs_deb_usbd(&cardp->udev->dev,
"Received valid boot command response\n");
return;
@@ -526,7 +529,9 @@
lbs_pr_info("boot cmd response wrong magic number (0x%x)\n",
le32_to_cpu(bootcmdresp.magic));
}
- } else if (bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) {
+ } else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) &&
+ (bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) &&
+ (bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) {
lbs_pr_info("boot cmd response cmd_tag error (%d)\n",
bootcmdresp.cmd);
} else if (bootcmdresp.result != BOOT_CMD_RESP_OK) {
@@ -564,8 +569,8 @@
kfree_skb(skb);
- /* reschedule timer for 200ms hence */
- mod_timer(&cardp->fw_timeout, jiffies + (HZ/5));
+ /* Give device 5s to either write firmware to its RAM or eeprom */
+ mod_timer(&cardp->fw_timeout, jiffies + (HZ*5));
if (cardp->fwfinalblk) {
cardp->fwdnldover = 1;
@@ -809,7 +814,54 @@
}
-static int if_usb_prog_firmware(struct if_usb_card *cardp)
+/**
+* @brief This function programs the firmware subject to cmd
+*
+* @param cardp the if_usb_card descriptor
+* fwname firmware or boot2 image file name
+* cmd either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
+* or BOOT_CMD_UPDATE_BOOT2.
+* @return 0 or error code
+*/
+static int if_usb_prog_firmware(struct if_usb_card *cardp,
+ const char *fwname, int cmd)
+{
+ struct lbs_private *priv = cardp->priv;
+ unsigned long flags, caps;
+ int ret;
+
+ caps = priv->fwcapinfo;
+ if (((cmd == BOOT_CMD_UPDATE_FW) && !(caps & FW_CAPINFO_FIRMWARE_UPGRADE)) ||
+ ((cmd == BOOT_CMD_UPDATE_BOOT2) && !(caps & FW_CAPINFO_BOOT2_UPGRADE)))
+ return -EOPNOTSUPP;
+
+ /* Ensure main thread is idle. */
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ while (priv->cur_cmd != NULL || priv->dnld_sent != DNLD_RES_RECEIVED) {
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+ if (wait_event_interruptible(priv->waitq,
+ (priv->cur_cmd == NULL &&
+ priv->dnld_sent == DNLD_RES_RECEIVED))) {
+ return -ERESTARTSYS;
+ }
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ }
+ priv->dnld_sent = DNLD_BOOTCMD_SENT;
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+ ret = __if_usb_prog_firmware(cardp, fwname, cmd);
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+ priv->dnld_sent = DNLD_RES_RECEIVED;
+ spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+ wake_up_interruptible(&priv->waitq);
+
+ return ret;
+}
+
+static int __if_usb_prog_firmware(struct if_usb_card *cardp,
+ const char *fwname, int cmd)
{
int i = 0;
static int reset_count = 10;
@@ -817,20 +869,32 @@
lbs_deb_enter(LBS_DEB_USB);
- if ((ret = request_firmware(&cardp->fw, lbs_fw_name,
- &cardp->udev->dev)) < 0) {
+ ret = request_firmware(&cardp->fw, fwname, &cardp->udev->dev);
+ if (ret < 0) {
lbs_pr_err("request_firmware() failed with %#x\n", ret);
- lbs_pr_err("firmware %s not found\n", lbs_fw_name);
+ lbs_pr_err("firmware %s not found\n", fwname);
goto done;
}
- if (check_fwfile_format(cardp->fw->data, cardp->fw->size))
+ if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) {
+ ret = -EINVAL;
goto release_fw;
+ }
+
+ /* Cancel any pending usb business */
+ usb_kill_urb(cardp->rx_urb);
+ usb_kill_urb(cardp->tx_urb);
+
+ cardp->fwlastblksent = 0;
+ cardp->fwdnldover = 0;
+ cardp->totalbytes = 0;
+ cardp->fwfinalblk = 0;
+ cardp->bootcmdresp = 0;
restart:
if (if_usb_submit_rx_urb_fwload(cardp) < 0) {
lbs_deb_usbd(&cardp->udev->dev, "URB submission is failed\n");
- ret = -1;
+ ret = -EIO;
goto release_fw;
}
@@ -838,8 +902,7 @@
do {
int j = 0;
i++;
- /* Issue Boot command = 1, Boot from Download-FW */
- if_usb_issue_boot_command(cardp, BOOT_CMD_FW_BY_USB);
+ if_usb_issue_boot_command(cardp, cmd);
/* wait for command response */
do {
j++;
@@ -847,12 +910,21 @@
} while (cardp->bootcmdresp == 0 && j < 10);
} while (cardp->bootcmdresp == 0 && i < 5);
- if (cardp->bootcmdresp <= 0) {
+ if (cardp->bootcmdresp == BOOT_CMD_RESP_NOT_SUPPORTED) {
+ /* Return to normal operation */
+ ret = -EOPNOTSUPP;
+ usb_kill_urb(cardp->rx_urb);
+ usb_kill_urb(cardp->tx_urb);
+ if (if_usb_submit_rx_urb(cardp) < 0)
+ ret = -EIO;
+ goto release_fw;
+ } else if (cardp->bootcmdresp <= 0) {
if (--reset_count >= 0) {
if_usb_reset_device(cardp);
goto restart;
}
- return -1;
+ ret = -EIO;
+ goto release_fw;
}
i = 0;
@@ -882,7 +954,7 @@
}
lbs_pr_info("FW download failure, time = %d ms\n", i * 100);
- ret = -1;
+ ret = -EIO;
goto release_fw;
}
