mac80211: use nl80211 interface types
There's really no reason for mac80211 to be using its
own interface type defines. Use the nl80211 types and
simplify the configuration code a bit: there's no need
to translate them any more now.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 85260c3..e09ed2c 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -507,7 +507,7 @@
sc->iobase = mem; /* So we can unmap it on detach */
sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
- sc->opmode = IEEE80211_IF_TYPE_STA;
+ sc->opmode = NL80211_IFTYPE_STATION;
mutex_init(&sc->lock);
spin_lock_init(&sc->rxbuflock);
spin_lock_init(&sc->txbuflock);
@@ -1377,8 +1377,8 @@
ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
if (ret)
return ret;
- if (sc->opmode == IEEE80211_IF_TYPE_AP ||
- sc->opmode == IEEE80211_IF_TYPE_MESH_POINT) {
+ if (sc->opmode == NL80211_IFTYPE_AP ||
+ sc->opmode == NL80211_IFTYPE_MESH_POINT) {
/*
* Always burst out beacon and CAB traffic
* (aifs = cwmin = cwmax = 0)
@@ -1386,7 +1386,7 @@
qi.tqi_aifs = 0;
qi.tqi_cw_min = 0;
qi.tqi_cw_max = 0;
- } else if (sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+ } else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
/*
* Adhoc mode; backoff between 0 and (2 * cw_min).
*/
@@ -1714,7 +1714,7 @@
/* let crypto-error packets fall through in MNTR */
if ((rs.rs_status &
~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
- sc->opmode != IEEE80211_IF_TYPE_MNTR)
+ sc->opmode != NL80211_IFTYPE_MONITOR)
goto next;
}
accept:
@@ -1777,7 +1777,7 @@
ath5k_debug_dump_skb(sc, skb, "RX ", 0);
/* check beacons in IBSS mode */
- if (sc->opmode == IEEE80211_IF_TYPE_IBSS)
+ if (sc->opmode == NL80211_IFTYPE_ADHOC)
ath5k_check_ibss_tsf(sc, skb, &rxs);
__ieee80211_rx(sc->hw, skb, &rxs);
@@ -1892,7 +1892,7 @@
ds = bf->desc;
flags = AR5K_TXDESC_NOACK;
- if (sc->opmode == IEEE80211_IF_TYPE_IBSS && ath5k_hw_hasveol(ah)) {
+ if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
ds->ds_link = bf->daddr; /* self-linked */
flags |= AR5K_TXDESC_VEOL;
/*
@@ -1941,8 +1941,8 @@
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
- if (unlikely(bf->skb == NULL || sc->opmode == IEEE80211_IF_TYPE_STA ||
- sc->opmode == IEEE80211_IF_TYPE_MNTR)) {
+ if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
+ sc->opmode == NL80211_IFTYPE_MONITOR)) {
ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
return;
}
@@ -2116,9 +2116,9 @@
sc->bmisscount = 0;
sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
- if (sc->opmode == IEEE80211_IF_TYPE_STA) {
+ if (sc->opmode == NL80211_IFTYPE_STATION) {
sc->imask |= AR5K_INT_BMISS;
- } else if (sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+ } else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
/*
* In IBSS mode we use a self-linked tx descriptor and let the
* hardware send the beacons automatically. We have to load it
@@ -2323,7 +2323,7 @@
* transmission time) in order to detect wether
* automatic TSF updates happened.
*/
- if (sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+ if (sc->opmode == NL80211_IFTYPE_ADHOC) {
/* XXX: only if VEOL suppported */
u64 tsf = ath5k_hw_get_tsf64(ah);
sc->nexttbtt += sc->bintval;
@@ -2553,7 +2553,7 @@
ath5k_debug_dump_skb(sc, skb, "TX ", 1);
- if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
+ if (sc->opmode == NL80211_IFTYPE_MONITOR)
ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
/*
@@ -2688,9 +2688,9 @@
sc->vif = conf->vif;
switch (conf->type) {
- case IEEE80211_IF_TYPE_STA:
- case IEEE80211_IF_TYPE_IBSS:
- case IEEE80211_IF_TYPE_MNTR:
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MONITOR:
sc->opmode = conf->type;
break;
default:
@@ -2761,7 +2761,7 @@
}
if (conf->changed & IEEE80211_IFCC_BEACON &&
- vif->type == IEEE80211_IF_TYPE_IBSS) {
+ vif->type == NL80211_IFTYPE_ADHOC) {
struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
if (!beacon) {
ret = -ENOMEM;
@@ -2880,17 +2880,17 @@
/* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
- if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
+ if (sc->opmode == NL80211_IFTYPE_MONITOR)
rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
- if (sc->opmode != IEEE80211_IF_TYPE_STA)
+ if (sc->opmode != NL80211_IFTYPE_STATION)
rfilt |= AR5K_RX_FILTER_PROBEREQ;
- if (sc->opmode != IEEE80211_IF_TYPE_AP &&
- sc->opmode != IEEE80211_IF_TYPE_MESH_POINT &&
+ if (sc->opmode != NL80211_IFTYPE_AP &&
+ sc->opmode != NL80211_IFTYPE_MESH_POINT &&
test_bit(ATH_STAT_PROMISC, sc->status))
rfilt |= AR5K_RX_FILTER_PROM;
- if (sc->opmode == IEEE80211_IF_TYPE_STA ||
- sc->opmode == IEEE80211_IF_TYPE_IBSS) {
+ if (sc->opmode == NL80211_IFTYPE_STATION ||
+ sc->opmode == NL80211_IFTYPE_ADHOC) {
rfilt |= AR5K_RX_FILTER_BEACON;
}
@@ -2995,7 +2995,7 @@
* in IBSS mode we need to update the beacon timers too.
* this will also reset the TSF if we call it with 0
*/
- if (sc->opmode == IEEE80211_IF_TYPE_IBSS)
+ if (sc->opmode == NL80211_IFTYPE_ADHOC)
ath5k_beacon_update_timers(sc, 0);
else
ath5k_hw_reset_tsf(sc->ah);
@@ -3010,7 +3010,7 @@
ath5k_debug_dump_skb(sc, skb, "BC ", 1);
- if (sc->opmode != IEEE80211_IF_TYPE_IBSS) {
+ if (sc->opmode != NL80211_IFTYPE_ADHOC) {
ret = -EIO;
goto end;
}
